Academic literature on the topic 'Kationische Polymerisation'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Kationische Polymerisation.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Kationische Polymerisation"

1

Freyer, Christian V., Hans-Peter Mühlbauer, and Oskar Nuyken. "Telechele des methylpropens durch kationische polymerisation." Angewandte Makromolekulare Chemie 145, no. 1 (November 1986): 69–87. http://dx.doi.org/10.1002/apmc.1986.051450104.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Sjcar, E., and S. Lunak. "Die kationische polymerisation von phenylglyzidylather mit bortrifluorid." Journal of Polymer Science Part C: Polymer Symposia 16, no. 2 (March 7, 2007): 643–51. http://dx.doi.org/10.1002/polc.5070160205.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Michaudel, Quentin, Veronika Kottisch, and Brett P. Fors. "Kationische Polymerisation: von der Photoinitiierung zur Steuerung durch Licht." Angewandte Chemie 129, no. 33 (June 30, 2017): 9798–808. http://dx.doi.org/10.1002/ange.201701425.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Krüger, H., C. Wehrstedt, W. Hiller, G. Schulz, and J. Rübner. "Die kationische Polymerisation von 1,3-Dioxepan in Gegenwart von Poly(ethylenglycol)." Acta Polymerica 40, no. 7 (July 1989): 430–35. http://dx.doi.org/10.1002/actp.1989.010400702.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Heublein, Günther, Gerhard Agatha, Horst Dawczynski, and Barbara Zaleska. "Zur Anwendung der Taft-Gleichung auf die kationische Polymerisation von Alkylvinyläthern." Zeitschrift für Chemie 13, no. 11 (September 1, 2010): 432–34. http://dx.doi.org/10.1002/zfch.19730131115.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Arndt, Stefan, Klaus Beckerle, Peter M. Zeimentz, Thomas P. Spaniol, and Jun Okuda. "Kationische Yttrium-Methyl-Komplexe als funktionale Modelle für Katalysatoren zur Polymerisation von 1,3-Dienen." Angewandte Chemie 117, no. 45 (November 18, 2005): 7640–44. http://dx.doi.org/10.1002/ange.200502915.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Bochmann, Manfred, and David M. Dawson. "Synthese und Reaktivität von [Al(C5H5)2]+: ein hocheffizienter Initiator für die kationische Polymerisation von Isobuten." Angewandte Chemie 108, no. 19 (October 7, 1996): 2371–73. http://dx.doi.org/10.1002/ange.19961081917.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Heublein, Günther, and Brigitte Adelt. "Zum Mechanismus der kationischen Polymerisation von Olefinen." Zeitschrift für Chemie 11, no. 9 (September 1, 2010): 321–31. http://dx.doi.org/10.1002/zfch.19710110902.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Heublein, Günther, Peter Hallpap, and Joachim Draffehn. "Mehrparameterkorrelationen bei der kationischen Polymerisation von Alkylvinyläthern." Zeitschrift für Chemie 14, no. 8 (September 1, 2010): 309–10. http://dx.doi.org/10.1002/zfch.19740140809.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Heublein, Günther, Peter Hallpap, Reinhard Wondraczek, and Peter Adler. "Über Mehrparameterkorrelationen auf dem Gebiet der kationischen Polymerisation." Zeitschrift für Chemie 20, no. 1 (August 31, 2010): 11–16. http://dx.doi.org/10.1002/zfch.19800200103.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Kationische Polymerisation"

1

Potdevin, Alexander Philipp. "Kationische Polymerisation von flüssigkristallinen Monomeren." [S.l. : s.n.], 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Grund, Silke. "Synthese anorganisch-organischer Polyfurfurylalkohol-Nanokomposite durch die Zwillingspolymerisation." Doctoral thesis, Universitätsbibliothek Chemnitz, 2011. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-63440.

Full text
Abstract:
In der vorliegenden Arbeit wird die kationische Polymerisation neuer Furanmonomere beschrieben, die zu anorganisch-organischen Nanokompositen führt. Die kationische Polymerisation des Tetrafurfuryloxysilans steht dabei im Vordergrund. Ausgehend von den synthetisierten Kompositen wird die Herstellung von anorganischen Oxiden durch thermische Oxidation und von Kohlenstoffmaterialien durch thermische Behandlung in Schutzgasatmosphäre beschrieben. Die Charakterisierung der Komposite, Oxide und Kohlenstoffmaterialien erfolgt mittels Festkörper-NMR-Spektroskopie, Röntgenbeugung und Elektronenmikroskopie. Das Prinzip der neu entdeckten Zwillingspolymerisation wird vorgestellt und anhand verschiedener Beispiele auf seine weitere Anwendbarkeit zur Synthese anorganisch-organischer Kompositmaterialien überprüft.
APA, Harvard, Vancouver, ISO, and other styles
3

Höhne, Susanne. "Untersuchungen zur kationischen Polymerisation von Vinylmonomeren des Furans und Thiophens." Doctoral thesis, Universitätsbibliothek Chemnitz, 2006. http://nbn-resolving.de/urn:nbn:de:swb:ch1-200501585.

Full text
Abstract:
In der vorliegenden Arbeit wurde die kationische Polymerisation der heterocyclischen Monomere 2-Vinylfuran, 5-Methyl-2-vinylfuran und 2-Vinylthiophen in der Gegenwart silikatischer Partikel untersucht. Produkte dieser Reaktion sind Polymer/SiO2-Hybridpartikel und lösliche Polymere. Zu ihrer Untersuchung wurden NMR-spektroskopische Verfahren, IR-, UV/Vis-, MALDI TOF-Spektroskopie, Elementaranalyse und GPC angewandt. Damit gelang es, die Struktur der Polymere weitgehend aufzuklären. Der Einfluß der Reaktionsbedingungen auf die Ergebnisse der kationischen Oberflächenpolymerisation wurde untersucht und diskutiert. Die Ausbildung vernetzter Polymere bei der kationischen Polymerisation von 2-Vinylfuran bewirkte eine besonders starke Anbindung der Poly(2-vinylfuran)-Schicht und hohe Polymergehalte an den SiO2-Partikeln. Im Falle des Poly(2-vinylthiophens) (PVT) waren die Polymergehalte der Hybridpartikel deutlich niedriger. Es wurde eine lineare Polymerstruktur vorgeschlagen. Poly(2-vinylthiophen) und Poly(2-vinylthiophen)/Kieselgel-Hybridpartikel wurden in polymeranalogen Reaktionen mit Hydridakzeptoren und FeCl3 umgesetzt. Ziele dieser Reaktionen waren die Erzeugung von konjugierten Strukturelementen und die kontrollierte Vernetzung des Polymers über Bisthiopheneinheiten. Der Einfluß der Reaktionszeit und der Natur der eingesetzten Reagenzien auf die Reaktion von PVT mit Hydridakzeptoren wurde ausführlich studiert. Der Einfluß der Reaktionsbedingungen auf die Vernetzungsreaktion mit FeCl3 wurde mit Hilfe von GPC, IR- und 13C{1H}-CP/MAS-NMR-Spektroskopie untersucht
The following work examines the cationic polymerization of the heterocyclic monomers 2-vinylfuran, 5-methyl-2-vinylfuran und 2-vinylthiophen mediated by silica particles. The products of this reaction are polymer/SiO2-hybridpartikels and a soluble polymer part. For characterization of the products NMR-spectroscopical methods, IR-, UV/Vis-, MALDI TOF-spectroscopy, elemental analysis and GPC were used. With the help of this methods it succeeded to clear up the polymer structure. The influence of the reaction conditions on the results of the cationic polymerization was examined and discussed. Extensive crosslinking of the 2-vinylfuran monomer during cationic polymerization causes a very strong linkage of the poly(2-vinylfuran)-layer and a hight polymer content of the poly(2-vinylfuran)/SiO2-hybridpartikels. In case of poly(2-vinylthiophen) (PVT) the polymer content of the hybrid particles was notedly lower. A linear polymer structure was supposed. The reaction of poly(2-vinylthiophen) and poly(2-vinylthiophen)/silica hybrid particles with hydridacceptors and FeCl3 was studied. The objectives of this reactions were to generate conjugated structures and to cross-link the polymer by creating bisthiophene structures in a controlled manner. The influence of the reaction time and the nature of the acceptors on the reaction of PVT with the hydride acceptors was examined in detail. The influence of the reaction conditions on the cross-linking reaction with FeCl3 was studied with the help of GPC, IR- und 13C{1H} CP/MAS NMR spectroscopy
APA, Harvard, Vancouver, ISO, and other styles
4

Reif, Michael. "Maßgeschneiderte Poly(2-oxazolin)e für die Darstellung komplexer biomimetischer Zellmembranen." kostenfrei, 2009. http://mediatum2.ub.tum.de/node?id=818159.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Gräser, Annett. "Kationische Wirt-Gast-Polymerisation in Y-Zeolithen und MCM-41: Synthese und Charakterisierung neuartiger organisch-anorganischer Polymer-Zeolith-Hybride." Doctoral thesis, Universitätsbibliothek Chemnitz, 2000. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-200000522.

Full text
Abstract:
Die Synthese von neuartigen organisch-anorganischen Polymer-Zeolith-Hybriden wird in der vorliegenden Arbeit vorgestellt. Die Hybride wurden durch kationische Polymerisation elek-tronenreicher Monomere direkt in den Poren der Zeolithe und zeolithanalogen Materialien hergestellt. Die Vinylether Ethyl-, Isobutyl-, Cyclohexyl- und 2-Chlor-ethylvinylether, 2,3-Dihydrofuran, 2-Methoxypropen sowie N-Vinylcarbazol wurden zur Herstellung der orga-nischen Komponente der Hybride genutzt. Die Polymerisation wurde dabei einerseits durch die Protonen der Zeolithgitter und andererseits durch separate Oberflächeninitiatoren gestar-tet. Die anorganische Basis der Hybride bildeten vorrangig mikroporöser HY-Zeolith und mesoporöses MCM-41. Bei der Synthese entstand neben dem eingeschlossenen Polymer im Zeolith eine vom Hybrid extrahier-bare Polymerfraktion. Beide Fraktionen wurden mittels GPC und einer speziellen Kopplung von GPC und UV/Vis-Spektrometer analysiert. DSC und dielektrische Spektro-skopie wurden zur Glasübergangstemperaturbestimmung herangezogen. Die Strukturuntersuchung der neuartigen Hybridmaterialien erfolgte mit Festkörper-NMR-Spektroskopie, Röntgendiffraktometrie XRD, Transmissionselektronenmikroskopie TEM, Sekun-därelektro-nenmikroskopie SEM, Elektronenstrahlmikroanalyse ESMA, UV/Vis-Spektroskopie und Infrarotspektroskopie FT-IR. Die Porentopologie wurde mit Stick-stoff-sorp-tionsmessungen bestimmt.
APA, Harvard, Vancouver, ISO, and other styles
6

Gräser, Annett. "Kationische Wirt-Gast-Polymerisation in Y-Zeolithen und MCM-41 Synthese und Charakterisierung neuartiger organisch-anorganischer Polymer-Zeolith-Hybride /." [S.l. : s.n.], 2000. http://deposit.ddb.de/cgi-bin/dokserv?idn=963255681.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Graeser, Annett. "Untersuchungen zur Wirt-Gast-Polymerisation von Vinylethern in Zeolithen und MCM-41." Master's thesis, Universitätsbibliothek Chemnitz, 1996. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-199600099.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Meyer, Torsten. "Synthesewege zu neuen Hybridmaterialien aus stickstoffhaltigen Monomeren und silikatischen Partikeln." Doctoral thesis, [S.l. : s.n.], 2001. http://deposit.ddb.de/cgi-bin/dokserv?idn=965170977.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Madl, Alexander. "Die kationisch induzierte Oligomerisation von N-Vinylformamid." Doctoral thesis, [S.l. : s.n.], 2000. http://deposit.ddb.de/cgi-bin/dokserv?idn=962394262.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Wöckel, L., A. Seifert, C. Mende, I. Roth-Panke, L. Kroll, and S. Spange. "Resin and carbon foam production by cationic step-growth polymerization of organic carbonates." Universitätsbibliothek Chemnitz, 2017. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-220096.

Full text
Abstract:
Acid induced step-growth polymerizations of bis(p-methoxybenzyl) carbonate (pMBC), bis(m-methoxybenzyl) carbonate (mMBC) and difurfuryl carbonate (DFC) have been performed to produce resin-foams, because controlled release of carbon dioxide takes place during polymerization of those organic carbonates. The monomers are polymerized in bulk using p-toluene sulfonic acid (pTS) as a catalyst. The volume development of the foams is assisted by use of an appropriate surfactant and the crosslinking agent 1,3,5-trioxane as co-components. A portion of carbon dioxide release is a function of the carbenium stability of the reactive intermediate derived from the monomer; DFC > pMBC ≫ mMBC. Resins derived from mMBC can be post-treated to release carbon dioxide after polymerization. The molecular structures of the resulting materials are investigated by solid state 13C-NMR spectroscopy and IR spectroscopy. Scanning electron microscopy was used to study foam morphology. The carbon dioxide release was monitored with TG-MS analysis. Finally, the polymer foams have been converted into carbon foams and investigated by means of mercury porosimetry
Dieser Beitrag ist aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Kationische Polymerisation"

1

Penczek, S. Cationic Ring-Opening Polymerization: Part 2, Synthetic Applications (Advances in Polymer Science, Vol 68/69). Springer, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography