Relevant bibliographies by topics / Kerf Width

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Kerf Width'

Author: Grafiati
Published: 3 June 2025
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Kerf Width.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Kerf Width"

1

Kminiak, R., and Š. Barcík. "Possibilities of homogenization of the kerf width created by the technology of abrasive water-jet cutting." Journal of Forest Science 57, No. 12 (2011): 574–79. http://dx.doi.org/10.17221/61/2011-jfs.

Full text
Abstract:
The paper deals with the possibilities of homogenization of the kerf width by proper choice of the respective feed rate and abrasive mass flow for particular models of cutting. The introductory part is devoted to reasons for the kerf width variability in dependence on the models of cutting, as well as to the methods of determining the kerf width in cutting of solid wood by abrasive water jet. In the conclusion are presented the results concerning the development of kerf width in the range of commonly used feed rates and abrasive mass flows.
APA, Harvard, Vancouver, ISO, and other styles
2

Yilbas, Bekir Sami, S. S. Akhtar, E. Bayraktar, and Zuhair M. Gasem. "Laser Cutting of Thin Aluminum and Silicon Alloy: Influence of Laser Power on Kerf Width." Advanced Materials Research 445 (January 2012): 442–47. http://dx.doi.org/10.4028/www.scientific.net/amr.445.442.

Full text
Abstract:
Laser cutting of aluminum-silicon sheet is carried out. The influence of laser output power on the kerf width is examined in details. The lump parameter analysis is introduced to predict the kerf width size. The percentage of kerf width size variation due to different laser output power levels is formulated. It is found that the kerf width size predicted agrees well with the experimental data. The influence of laser output power on the kerf width size is more pronounced for power levels 350 W. Keywords: laser cutting, aluminum-silicon, kerf width
APA, Harvard, Vancouver, ISO, and other styles
3

Uslan, I. "CO2 laser cutting: Kerf width variation during cutting." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 219, no. 8 (2005): 571–77. http://dx.doi.org/10.1243/095440505x32508.

Full text
Abstract:
The kerf width size variation along a laser-cut section lowers the end product quality significantly. In the present study, CO2 laser cutting of mild steel is considered and the influence of laser power and cutting speed variations on the kerf width size is examined. A lump parameter analysis is introduced when predicting the kerf width size and an experiment is conducted to measure the kerf size and its variation during the cutting process. It is found that the power intensity at the workpiece surface influences significantly the kerf width size. The variation in the power intensity results i
APA, Harvard, Vancouver, ISO, and other styles
4

Dr. U Ashok Kumar, P. Anunay, G. Sai Seemanth, and M. Bala Gangadhar Tilak. "Geometrical Characteristics of Kerf width on Titanium Alloy by Abrasive Water Jet Machining." ARAI Journal of Mobility Technology 4, no. 4 (2024): 1344–50. http://dx.doi.org/10.37285/ajmt.4.4.5.

Full text
Abstract:
This study investigates the effect of abrasive water jet (AWJ) machining parameters on the kerf width geometric characteristics of Ti-alloy workpieces. Taguchi's design of experiments were used to evaluate the influence of standoff distance, abrasive mass flow rate, and traverse speed on kerf width The results indicate that nozzle traverse speed is the most significant factor affecting the top kerf width. This suggests that controlling the traverse speed is crucial for achieving desired kerf width and maintaining machining precision. Water pressure emerges as the second most significant factor
APA, Harvard, Vancouver, ISO, and other styles
5

V., Kavimani, Gopal P. M., Stalin B., et al. "Influence of reduced graphene oxide addition on kerf width in abrasive water jet machining of nanofiller added epoxy-glass fibre composite." PLOS ONE 17, no. 8 (2022): e0270505. http://dx.doi.org/10.1371/journal.pone.0270505.

Full text
Abstract:
The present study aims to develop a novel hybrid polymer composite with reduced graphene oxide (rGO) as filler and optimize its Abrasive Water Jet Machining (AWJM) parameters for reduced kerf width. The influence of rGO addition on kerf width is analysed in detail along with Pump pressure (bar), Transverse speed (mm/min) and Standoff distance(mm). The experiments are designed based on Taguchi’s orthogonal array techniques in which L27 is adopted for three input parameters at three levels. The influence of each factor is used to identify the significance of selected parameters over kerf width,
APA, Harvard, Vancouver, ISO, and other styles
6

Dhanawade, Ajit, and Shailendra Kumar. "Experimental study of delamination and kerf geometry of carbon epoxy composite machined by abrasive water jet." Journal of Composite Materials 51, no. 24 (2017): 3373–90. http://dx.doi.org/10.1177/0021998316688950.

Full text
Abstract:
The present article focuses on mechanism of delamination and kerf geometry in abrasive water jet machining of carbon epoxy composite. In the present study, four process parameters of abrasive water jet machining namely hydraulic pressure, traverse rate, stand-off distance, and abrasive mass flow rate are considered. The experiments are performed on the basis of response surface methodology as a statistical design of experiment approach. Delamination in machined samples is observed by using scanning electron microscope. Analysis of variance is performed in order to investigate the influence of
APA, Harvard, Vancouver, ISO, and other styles
7

Huang, Chuan Zhen, Rong Guo Hou, Jun Wang, and Yan Xia Feng. "The Effect of High Pressure Abrasive Water Jet Cutting Parameters on Cutting Performance of Granite." Key Engineering Materials 304-305 (February 2006): 560–64. http://dx.doi.org/10.4028/www.scientific.net/kem.304-305.560.

Full text
Abstract:
The effect of cutting parameters such as water pressure, nozzle traverse speed and standoff distance on the granite cutting performance as characterized by kerf width, kerf taper, and striation drag angle are researched with a series of experiments using garnetabrasive and ultra high pressure abrasive water jet numerical control machine tool. The relationship between system pressure and abrasive mass flow rate is also studied. The research results show that the abrasive mass flow rate is only proportional to water pressure and the effect of other cutting parameters is not significant. It is fo
APA, Harvard, Vancouver, ISO, and other styles
8

Safari, Mehdi, Seyed Mohammad Abtahi, and Jalal Joudaki. "Experimental Modeling, Statistical Analysis, and Optimization of the Laser-Cutting Process of Hardox 400 Steel." Materials 17, no. 12 (2024): 2798. http://dx.doi.org/10.3390/ma17122798.

Full text
Abstract:
Fiber laser cutting machines are widely used in industry for cutting various sheet metals. Hardox steel is widely used in the construction of machinery and equipment that are subjected to wear and impact due to its anti-wear properties and good impact resistance. In this experimental study, the effect of input parameters including laser output power (LOP), laser-cutting speed (LCS), and focal point position (FPP) of fiber laser on the surface roughness and kerf width of Hardox 400 steel sheets are studied. In addition, the optimization of input parameters to achieve the desired surface roughne
APA, Harvard, Vancouver, ISO, and other styles
9

Agnitias, Riska Surya, and Rusiyanto Rusiyanto. "Pengaruh Variasi Kuat Arus Terhadap Lebar Pemotongan dan Kekerasan pada Baja Karbon Sedang dengan CNC Plasma Arc Cutting." Jurnal Dinamika Vokasional Teknik Mesin 4, no. 2 (2019): 99–104. http://dx.doi.org/10.21831/dinamika.v4i2.27391.

Full text
Abstract:
The purpose of this research is to determine the effects of current variation to the cutting kerf and hardness in medium carbon steel cutting process using CNC Plasma Arc Cutting. This research uses experimental methods to study the effect of a given treatment. The electric current was varied for 20, 25, 30, 35, and 40 amps. The test parameters were cutting kerf and hardness. The data were analyzed using descriptive statistics. The test result shows that there are differences in cutting kerf and hardness. The lowest kerf and hardness value was obtained from the 20 amps current, with a kerf of
APA, Harvard, Vancouver, ISO, and other styles
10

Zhang, Jinliang, Yongchang Li, Yuansheng Zhang, Fengwei Yang, Chao Liang, and Shunhui Tan. "Using a high-pressure water jet-assisted tunnel boring machine to break rock." Advances in Mechanical Engineering 12, no. 10 (2020): 168781402096229. http://dx.doi.org/10.1177/1687814020962290.

Full text
Abstract:
The concept of tunnel boring machine (TBM) disc cutter rock breaking coupled with high-pressure water jets has been proposed to overcome the difficulties that occur when TBMs encounter extremely hard rocks. Thus, to meet actual engineering requirements for the TBM construction of tunnels as part of the Wan’anxi water diversion project in Longyan City (Fujian Province, China), experiments were conducted on high-pressure water jet-assisted TBM disc cutter rock breaking. By varying kerf depth and width under different water jet parameters and performing disc cutter rock breaking tests on rock sur
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Kerf Width"

1

Sucosky, Philippe. "Water jet cutting of silicon : kerf width prediction." Thesis, Georgia Institute of Technology, 2000. http://hdl.handle.net/1853/17511.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Hrubešová, Gabriela. "Vícerozměrné regresní modely." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-382191.

Full text
Abstract:
The subject of this diploma thesis is the use of knowledge of multidimensional regression models in practice. The first part describes the theoretical basis for regression analysis. Then further we focus on modeling theory and nonlinear multidimensional models. The next part describes a real problem. This is the width of kerf of titanium alloy using wire electrical discharge machining (WEDM). We apply most of the theoretical knowledge to this problem, and we use regression analysis using Minitab software. We will analyze the data from different perspectives and create several multidimensional
APA, Harvard, Vancouver, ISO, and other styles
3

Rúnarsson, Helgi Freyr. "Kerr black holes with scalar and Proca hair." Doctoral thesis, Universidade de Aveiro, 2017. http://hdl.handle.net/10773/23654.

Full text
Abstract:
Doutoramento em Física<br>Esta tese apresenta estudos recentes sobre generalizações dos buracos negros de Kerr com cabelo escalar. Depois de uma curta introdução, discutiremos em primeiro lugar o conceito de Q-clouds, que são generalizações com rotação de objectos solitónicos conhecidos como Q-balls, e que são obtidos como soluções de equações de campo não lineares, mas como campos teste, no espaço-tempo do buraco negro de Kerr. Depois disto, iremos considerar soluções em que a matéria impacta no espaço-tempo, focando em três exemplos: 1) Cabelo escalar com auto-interacções em redor de
APA, Harvard, Vancouver, ISO, and other styles
4

Bostock, C. "Two-colour Helmholtz solitons with a defocusing Kerr nonlinearity." Thesis, University of Salford, 2011. http://usir.salford.ac.uk/26587/.

Full text
Abstract:
Multi-colour spatial solitons comprise localised optical waves at distinct temporal frequencies. These components (which may be bright-like and/or darklike in nature) tend to overlap in the propagation plane of a waveguide, allowing the interplay between diffractive broadening and medium non-linearity (self- and mutual-focusing processes) to result in an electromagnetic structure with a stationary intensity pattern. Two-colour spatial solitons for a Kerr-type host medium were first proposed some two decades ago within the context of an intuitive Schrodinger-type model. Subsequent experiments u
APA, Harvard, Vancouver, ISO, and other styles
5

Delgado, Jorge Filipe Mónico. "Kerr black holes with electric charge and scalar hair." Master's thesis, Universidade de Aveiro, 2016. http://hdl.handle.net/10773/17984.

Full text
Abstract:
Mestrado em Física<br>A solução de Kerr [Kerr, 1963] descreve um buraco negro (BN) em rotação no vácuo em Relatividade Geral (RG). Pouco depois da sua descoberta, uma generalização electricamente carregada deste BN foi encontrada [Newman et al., 1965]. No início dos anos 70, poderosos teoremas de unicidade foram estabelecidos em RG, para o vácuo e electro-vácuo, demonstrando que estas são as soluções de BN mais gerais, fisicamente aceitávies, no vácuo ou electro-vácuo. Estas descobertas levaram a duas ideias, amplamente difundidas, mas não demonstradas: 1) BNs não têm \cabelo" [Ruffini
APA, Harvard, Vancouver, ISO, and other styles
6

Matelon, R. J. "The interaction of light with periodic magnetic structures." Thesis, Coventry University, 2003. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.289100.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Husemann, Ulrich. "Measurement of nuclear effects in the production of J,_ps63 [J,psi] mesons with the HERA-B detector." [S.l.] : [s.n.], 2005. http://deposit.ddb.de/cgi-bin/dokserv?idn=973919566.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Husemann, Ulrich. "Measurement of nuclear effects in the production of J/y [J-psi] mesons with the HERA-B detector." [S.l. : s.n.], 2005. http://deposit.ddb.de/cgi-bin/dokserv?idn=973919566.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Kestel, Martin. "TeV [gamma]-flux [gamma-flux] and spectrum of Markarian 421 in 1999/2000 with Hegra CT1 using refined analysis methods." [S.l. : s.n.], 2003. http://deposit.ddb.de/cgi-bin/dokserv?idn=969343248.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Brändle, Johann Paul. "New materials with large magneto-optical polar Kerr effects at room temperature /." [S.l.] : [s.n.], 1990. http://e-collection.ethbib.ethz.ch/show?type=diss&nr=9252.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Kerf Width"

1

Beukema, Jaap. Een kerk bekent kleur: Gemeente-zijn te midden van minima, moslims en migrantenkerken. Boekencentrum, 2002.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

artnoose. Ker-bloom!: Bet the farm : a dialog with italics. Artnoose, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Stockman, René. De kerk en het verstoorde leven: De plaats van de religieuzen in de geestelijke gezondheidszorg. Lannoo, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Perry, Pat. From Guernsey with Caire: The Kerr/Caire family in Scotland, Guernsey and Australia. Pat Perry, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Fiaz, Mohammed. Dipole moments and Kerr effect of poly(n-vinylcarbazole) and its complexes with trinitrofluorenone. Aston University. Department of Chemical Engineering and Applied Physics, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Kerr, Clark. Interviews with Clark Kerr, Ph.D.: A UC president's view of the expanding research university. UCSF Oral History Program, Dept. of the History of Health Sciences, University of California, San Francisco, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Linde, Maarten van der. Werkelijk, ik kan alles: Werkers in kerkelijke arbeid in de Nederlandse Hervormde Kerk 1945-1966. Boekencentrum, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Dusbiber, Mickey Kerr. Ancestors and descendants of Edwin Glen Kerr and Elizabeth Mills: With connecting lines and branches. M.K. Dusbiber, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Interuniversitair Instituut voor Missiologie en Oecumenica (Netherlands). Afdeling Oecumenica, ed. The liturgical movement in the Netherlands Reformed Church, 1911-1955: With special reference to the Anglican dimension. 2nd ed. Interuniversitair Instituut voor Missiologie en Oecumenica (afd. Oecumenica), 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

L, Avis Paul D., ed. Seeking the truth of change in the church: Reception, communion, and the ordination of women. T & T Clark, 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Kerf Width"

1

Gupta, A., P. Dhara, J. Das, et al. "Exploring Kerf Width in Wire EDM of EN36B Steel: A Statistical Analysis." In Lecture Notes in Mechanical Engineering. Springer Nature Singapore, 2024. https://doi.org/10.1007/978-981-97-6667-3_36.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Hrabec, Pavel, Josef Bednář, Radim Zahradníček, Tomáš Prokeš, and Anna Machova. "Statistical Analysis of the Width of Kerf Affecting the Manufacture of Minimal Inner Radius." In Recent Advances in Soft Computing and Cybernetics. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-61659-5_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Rathaur, Vrishab Singh, Krishnaa Selvaraju, and G. Rajyalakshmi. "Prediction and Optimization of Surface Roughness and Kerf Width in AWJM Using Soft Computing Tools." In Lecture Notes on Multidisciplinary Industrial Engineering. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-4700-9_30.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Mandal, K., S. Sarkar, S. Mitra, and D. Bose. "Analysis of Wire-EDM Input Parameters on Kerf Width and Surface Integrity for Al 6061 Alloy." In Innovation in Materials Science and Engineering. Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-2944-9_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Ahn, J. M., H. Y. Kim, and T. H. Kim. "Determination of Optimum Parameters Effect on Kerf Width of 316L Stainless Steel Tube in Nd:YAG Laser Cutting." In Materials Science Forum. Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-960-1.277.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Khanafi, Wima Azis, Yanuar Rohmat Aji Pradana, and Suprayitno. "Robust Parameter Design to Optimize Kerf Width and Material Removal Rate on Plasma Cutting of Stainless Steel 316." In Lecture Notes in Mechanical Engineering. Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-0867-5_20.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Dhale, Susheel Ramchandra, and Bhagyesh B. Deshmukh. "Investigations into the Effect of Varying Electrode Diameter on Cutting Rate and Kerf Width in WEDM of Varying Thickness Inconel718." In Lecture Notes on Multidisciplinary Industrial Engineering. Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-32-9471-4_47.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

El Aoud, B., M. Boujelbene, E. Bayraktar, S. Ben Salem, and I. Miskioglu. "Studying Effect of CO2 Laser Cutting Parameters of Titanium Alloy on Heat Affected Zone and Kerf Width Using the Taguchi Method." In Mechanics of Composite and Multi-functional Materials, Volume 6. Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-63408-1_14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Menze, Christian, Jan Stegmann, Stephan Kabelac, and Hans-Christian Möhring. "Improving Chip Curling with Reduced Amount of Cutting Fluid in Circular Sawing with Internal Coolant Supply." In Lecture Notes in Mechanical Engineering. Springer Nature Switzerland, 2025. https://doi.org/10.1007/978-3-031-77429-4_72.

Full text
Abstract:
AbstractCircular sawing is an important intermediate step in industrial production. Due to the increasing demand for high-performance materials such as titanium alloys, efficient manufacturing for such difficult-to-machine materials is becoming more and more important. Traditionally, large quantities of cutting fluid are supplied to the sawing process by means of flood lubrication. However, the application of cutting fluids is expensive and energy-intensive. Additionally, cutting fluids pollute the environment and are harmful to health. The aim should therefore be to develop resource-saving ma
APA, Harvard, Vancouver, ISO, and other styles
10

Bonsen, Matthias zur. "Sich mit der Kern-Energie des Unternehmens verbinden." In Leading with Life. Gabler, 2010. http://dx.doi.org/10.1007/978-3-8349-8977-2_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Kerf Width"

1

Heffernan, Brendan M., James Greenberg, and Antoine Rolland. "3 THz Frequency Synthesizer with Hz Stability." In CLEO: Science and Innovations. Optica Publishing Group, 2024. http://dx.doi.org/10.1364/cleo_si.2024.sm1p.7.

Full text
Abstract:
We use a 10 GHz electro-optic frequency comb and a 300 GHz dissipative Kerr soliton to synthesize a 10 MHz clock reference to 3 THz with an out-of-loop instability starting at 8 × 10 − 13 at 1 second.
APA, Harvard, Vancouver, ISO, and other styles
2

Stone, Jordan R., Xiyuan Lu, Gregory Moille, Daron Westly, and Kartik Srinivasan. "Kerr Microresonator Optical Parametric Oscillation with Wide Continuous Frequency Tuning." In CLEO: Science and Innovations. Optica Publishing Group, 2024. http://dx.doi.org/10.1364/cleo_si.2024.sw3o.6.

Full text
Abstract:
We leverage wavenumber-selective Kerr microresonator optical parametric oscillation to demonstrate nonlinear wavelength converters whose output frequencies are controlled via integrated heater technology and are continuously tunable over 1.5 THz.
APA, Harvard, Vancouver, ISO, and other styles
3

Pontula, Sahil, Jamison Sloan, Nicholas Rivera, and Marin Soljačić. "Terahertz squeezed light and self-pulsing in semiconductor lasers with nonlinear loss." In CLEO: Science and Innovations. Optica Publishing Group, 2024. http://dx.doi.org/10.1364/cleo_si.2024.sw3h.7.

Full text
Abstract:
We show how the combination of dispersive outcoupling and Kerr nonlinearity in semiconductor lasers creates regimes of self-pulsing and intensity-squeezed states of light from optical to terahertz wavelengths.
APA, Harvard, Vancouver, ISO, and other styles
4

Ghosh, Alekhya, Arghadeep Pal, Lewis Hill, et al. "Light Distribution Patterns in Microresonator Chain PICs with Kerr-Nonlinearity." In British and Irish Conference on Optics and Photonics. Optica Publishing Group, 2024. https://doi.org/10.1364/bicop.2024.ps.7.

Full text
Abstract:
We demonstrate control of optical power patterns in one-dimensional photonic lattices of coupled resonator optical waveguides (CROWS) induced by the Kerr effect. This can advance photonic integrated circuits, especially for light steering and optical computing.
APA, Harvard, Vancouver, ISO, and other styles
5

Ghosh, Alekhya, Arghadeep Pal, Lewis Hill, et al. "Controllable Light Distributions in 1-D Microresonator Chains with Kerr-Nonlinearity." In Nonlinear Photonics. Optica Publishing Group, 2024. http://dx.doi.org/10.1364/np.2024.npm4e.6.

Full text
Abstract:
We demonstrate the control of optical power patterns in one dimensional (1D) photonic lattices of coupled resonators via the Kerr effect. This can advance photonic integrated circuits, especially for light steering, and optical computing.
APA, Harvard, Vancouver, ISO, and other styles
6

Parsons, Robert, Swarnava Sanyal, Michael Cullen, et al. "Dispersion-Engineered Resonator-Based Interleaver Co-Designed with Kerr Comb Source." In Optical Fiber Communication Conference. Optica Publishing Group, 2025. https://doi.org/10.1364/ofc.2025.tu2g.6.

Full text
Abstract:
Abstract: We demonstrate interleavers with ∼30 dB crosstalk suppression and wide ≥ 60 nm optical bandwidth, utilizing dispersion-engineered resonators co-designed with normal-GVD Kerr comb sources. This scalable design supports ultra-broadband photonic interconnects.
APA, Harvard, Vancouver, ISO, and other styles
7

White, Alexander D., Geun Ho Ahn, Kasper Van Gasse, et al. "Passive On-Chip Nonlinear Optical Isolators with Built-in Laser Stabilization." In CLEO: Science and Innovations. Optica Publishing Group, 2024. http://dx.doi.org/10.1364/cleo_si.2024.sm3n.2.

Full text
Abstract:
We demonstrate fully passive optical isolators in silicon nitride nanophotonics using the intrinsic Kerr nonlinearity. These devices serve to both stabilize and isolate on-chip lasers, reducing the linewidth of DFB lasers by orders of magnitude.
APA, Harvard, Vancouver, ISO, and other styles
8

Osawa, Naoki, Akira Furujo, Masayuki Nagahori, Toshitake Onishi, Hiroyuki Yajima, and Takeshi Miyamoto. "Development of Edge-Preparing Plasma Arc Cutting (EPPAC) System." In CORROSION 2011. NACE International, 2011. https://doi.org/10.5006/c2011-11422.

Full text
Abstract:
Abstract Edge-Preparing Plasma Arc Cutting (EPPAC) systems have been developed. Top edges of kerfs generated by these systems have bevel angle of θ &amp;gt;155°, which is equal to or larger than that of 3-pass grinding edges. Cutting qualities except for melting of cut shoulder equivalent to or better than those of kerfs generated by conventional machines, and there is no slowdown on the cutting speed. The developed systems are tested under the practical condition in Japanese shipyards, and it has been demonstrated that there is no special problem in workplace safety, and kerfs which satisfy t
APA, Harvard, Vancouver, ISO, and other styles
9

Lucas, E., L. Hill, G. Xu, et al. "Topological Features of Bright Vector Solitons in Ring Resonators with Normal Dispersion." In Nonlinear Photonics. Optica Publishing Group, 2024. http://dx.doi.org/10.1364/np.2024.npth2d.2.

Full text
Abstract:
Experiments and simulations of unusual bright vector solitons in Kerr ring resonators with normal dispersion displaying a phase defect with a phase jump of π in one of the linear polarization components are presented.
APA, Harvard, Vancouver, ISO, and other styles
10

Jujukin, Nikolai. "GEOMETRY OF KERF WHEN CURVE SAWING WITH A CIRCULAR RIP-SAW." In Modern machines, equipment and IT solutions for industrial complex: theory and practice. FSBE Institution of Higher Education Voronezh State University of Forestry and Technologies named after G.F. Morozov, 2021. http://dx.doi.org/10.34220/mmeitsic2021_224-227.

Full text
Abstract:
Rip-sawing following the curvature of a crooked log means advantages for yield. However, the possibility to saw in a narrow curve with a circular saw blade is limited because of the inherently flat geometry of circular saw blades. For a double arbour circular saw the situation is even more problematic because the two blades have a certain overlap and thus, the two arbours are not positioned in the same horizontal position. In this study, a theoretical geometrical study of the creation of a kerf with a single circular saw blade and with a double arbour circular saw with two saw blades was exami
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Kerf Width"

1

Schmid, F., M. Smith, K. Schmid, and C. P. Khattak. Slicing of silicon ingots with reduced kerf. Final report (Phase II). Office of Scientific and Technical Information (OSTI), 2001. http://dx.doi.org/10.2172/806473.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Fitz, Julie, and Cathy Yun. Meeting urban and rural district needs for educators: California State University, Bakersfield’s teacher residencies. Learning Policy Institute, 2025. https://doi.org/10.54300/825.823.

Full text
Abstract:
In this report, we present case studies of two CSUB residencies: the Kern Urban Teacher Residency (Kern Urban) and the Teacher Residency for Rural Education (TRRE). Kern Urban, established in 2016, is CSUB’s longest-running residency program and partners with a single urban school district. TRRE, in contrast, hosted its first cohort in 2020 and prepares residents to teach in a specifically rural context. For this residency, CSUB partnered with the Tulare County Office of Education (TCOE), which facilitated placements in three separate districts as of the 2022–23 academic year. The different co
APA, Harvard, Vancouver, ISO, and other styles
3

Cusack, Caroline, Inger Graves, Colin Keogh, Kieran Reilly, Diego Pereiro, and Martha Dunbar. Sustainability and Business Plan Report. EuroSea, 2023. http://dx.doi.org/10.3289/eurosea_d6.5.

Full text
Abstract:
This deliverable outlines the sustainability and business plan of the Key Exploitable Result (KER) identified in WP6 with the most potential for commercialisation. The report includes a summary of the KER Solution for marine sensors to measure and forecast oxygen, heat and pH related Extreme Marine Events onsite for aquaculture – monitoring system for extreme marine events at aquaculture sites (WP6), a market analysis in terms of the market size and value, target market, competition, market needs that are being addressed as a result of the co-development process. Information is provided on agr
APA, Harvard, Vancouver, ISO, and other styles
4

Copeland-Davis, T. W. Can the Kern-ME5000 Mekometer Replace Invar Measurements? Results of Test Measurements with Three Machines. Office of Scientific and Technical Information (OSTI), 2005. http://dx.doi.org/10.2172/878880.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Kaewplung, Pasu. Performance improvement of fiber-optic transmission system by replacing electronic repeaters with optical amplifiers. Chulalongkorn University, 2004. https://doi.org/10.58837/chula.res.2004.70.

Full text
Abstract:
We study four methods: the zero-dispersion wavelength (ZDWL) transmission, the dispersion management, the optical soliton transmission, and the midway optical phase conjugation (OPC), for upgrading installed electronic repeater-based optical fiber transmission system to optically amplified system. We derive the optimum design rules for each scheme to achieve the maximum transmission data rate. The 1,318-km-long Thailand-Malaysia (T-M) submarine fiber-optic transmission system is used as the system model. Firstly, we give the basic knowledge about fiber characteristics and their effects to sign
APA, Harvard, Vancouver, ISO, and other styles
6

Borgeaud, Maurice, Jonathan Bamber, Anny Cazenave, et al. Earth Observation Groundbreaking Science Discoveries. ESA, 2025. https://doi.org/10.5270/essc-esa-eo-groundbreaking-science-2025.

Full text
Abstract:
This document was prepared by the Earth Sciences Panel of the European Space Sciences Committee in response to the ESA contract 500104016 entitled “Ground-breaking science discoveries and successes enabled by ESA Earth Observation satellites”. This brochure showcases 12 ground-breaking scientific discoveries and successes enabled by the programme. These are divided into 3 cases for each of the 4 main thematic domains of the Earth sciences: atmosphere, ocean, land, and polar regions. The criteria used to define a “groundbreaking science discovery” include a clear “elevator pitch”, the “degree o
APA, Harvard, Vancouver, ISO, and other styles
7

Simon, J., and G. Mosey. Feasibility Study of Economics and Performance of Solar Photovoltaics at the Kerr McGee Site in Columbus, Mississippi. A Study Prepared in Partnership with the Environmental Protection Agency for the RE-Powering America's Land Initiative: Siting Renewable Energy on Potentially Contaminated Land and Mine Sites. Office of Scientific and Technical Information (OSTI), 2013. http://dx.doi.org/10.2172/1068606.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Lynk, John. PR-610-163756-WEB Material Strength Verification. Pipeline Research Council International, Inc. (PRCI), 2019. http://dx.doi.org/10.55274/r0011573.

Full text
Abstract:
DATE: Tuesday, April 30, 2019 TIME: 11:00 a.m. ET CLICK THE DOWNLOAD/BUY BUTTON TO ACCESS THE WEBINAR REGISTRATION LINK Join the PRCI Integrity and Inspection technical committee for a pipeline operator driven discussion regarding PRCI research related to non-destructive technologies for the purpose of pipe material verification and how operators have applied this research in the field. This webinar will include; research project overview, operator case studies and analysis of current technology gaps. Panelists: Mark Piazza, Manager Pipeline Compliance and R and D, Colonial Pipeline Company Mi
APA, Harvard, Vancouver, ISO, and other styles
9

Fahima, Tzion, and Jorge Dubcovsky. Map-based cloning of the novel stripe rust resistance gene YrG303 and its use to engineer 1B chromosome with multiple beneficial traits. United States Department of Agriculture, 2013. http://dx.doi.org/10.32747/2013.7598147.bard.

Full text
Abstract:
Research problem: Bread wheat (Triticumaestivum) provides approximately 20% of the calories and proteins consumed by humankind. As the world population continues to increase, it is necessary to improve wheat yields, increase grain quality, and minimize the losses produced by biotic and abiotic stresses. Stripe rust, caused by Pucciniastriiformisf. sp. tritici(Pst), is one of the most destructive diseases of wheat. The new pathogen races are more virulent and aggressive than previous ones and have produced large economic losses. A rich source for stripe-rust resistance genes (Yr) was found in w
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Kerf Width' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography