Academic literature on the topic 'Klemes method'

Reinsberg, Jiří. Legio angelica a P. Method K. Klement, OSB. Trinitas, 2000.

Friedrich, Vogel. Kleines Lexikon der Bevölkerungs- und Sozialstatistik. R. Oldenbourg, 1996.

Judson, Samuel, Matthew Elacqua, Filip Cano, et al. "soid: A Tool for Legal Accountability for Automated Decision Making." In Computer Aided Verification. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-65630-9_12.

Heimes, Heiner Hans, Achim Kampker, Benjamin Dorn, et al. "Produktionsprozesse der Fahrzeugstruktur." In Elektromobilität. Springer Berlin Heidelberg, 2023. http://dx.doi.org/10.1007/978-3-662-65812-3_13.

Woleński, Jan. "Klemens Szaniawski – Rationality and Statistical Methods." In Polish Philosophers of Science and Nature in the 20th Century. BRILL, 2001. http://dx.doi.org/10.1163/9789004457799_021.

Tobies, Renate. "Felix Klein und Geschichte der Mathematik im Unterricht." In Vom Mittelalter in die Moderne - Episoden aus der Mathematikgeschichte. WTM-Verlag, 2024. http://dx.doi.org/10.37626/ga9783959872584.0.14.

Bürgi, H. B. "Molecular motion in crystals." In Correlations, transformations, and interactions in organic crystal chemistry. Oxford University PressOxford, 1994. http://dx.doi.org/10.1093/oso/9780198558262.003.0004.

Hollatz, Horst. "Some Numerical and Practical Problems in Linear Programming." In Functional Analysis, Optimization, and Mathematical Econoinics. Oxford University PressNew York, NY, 1990. http://dx.doi.org/10.1093/oso/9780195057294.003.0011.

"e. The transfer basket containing the items to be cleaned was lowered into the immersion sump , and statically (i.e. no liquid flow) sonicated for a finite pe-riod of time, usually 15 minutes. f. After static sonication, the rinse pump was turned on and the liquid in the immersion bath was circulated through the activated carbon columns at a rate of1,700 ml/minute for a finite period of time. The circulation time ranged fro m 15 minutes to 2 hours, depending on the purpose of the test. g. The rate of decontamination was monitored by following the concentration of the contaminant in the decontamination liquid (HFE-7100). h . Steps e and f were repeated until the presence of contaminant in the circulat-ing liquid could no longer be detected. i. When the immersion sump liquid was free of contaminant, the transfer basket was moved from the immersion sump to the superheat sump and dried for 30 minutes to remove liquid drag out. j . The transfer basket was removed from the Poly-Kleen™ system. The test pieces were removed from the basket, visually examined, photographed under visible and UV light, reweighed, and archived. I n order to maximize ultrasonic power density, the minimum amount of liquid needed to cover the parts being cleaned was used. Typically, the sump contained from 130 to 180 mm (5 to 7 inches) of liquid, which corresponds to a liquid vol-ume of approximately 15 liters to 30 liters (4 to 8 gallons) and a corresponding ul-trasonic power density of 26 to 18 watts/liter (100 to 70 watts/gallon). In prelimi-nary tests, it was noted that immersing and sonicating the test samples when the immersion sump was filled to the brim (about 53 liters (14 gallons)) did not result in effective cleaning. At that volume, the ultrasonic power density had dropped to a value of 8 watts/liter (30 watts/gallon). While this value would be considered marginal in a stainless steel ultrasonic bath, where the ultrasonic waves can be re-flected from the walls back into the liquid, in a polypropylene bath in which the walls absorb rather than reflect the ultrasonic waves, this power density level is too low. If parts were also contaminated with biological agents, after Step h, they would be sonicated in a fluorinated surfactant/HFE-7100 solution that would be circu-lated through microfilters to remove suspended materials. The parts would then be rinsed in fresh HFE-7100 to remove fluorocarbon surfactant residues, and then dried as described above. Table 3 lists the sensitive equipment decontamination experiments that were carried out in the Poly-Kleen™ system during the course of the program. The combination of equipment processed, contaminants used, and monitoring method(s) examined are listed in this table. The results of the various cleaning re-sults are summarized in Table 4. This table records the weights of the items listed in Table 3, before and after contamination, as well as the post-cleáning weight and visual appearance of these items." In Surface Contamination and Cleaning. CRC Press, 2003. http://dx.doi.org/10.1201/9789047403289-19.

Luo, Lu, and Daniel P. Siewiorek. "KLEM: A Method for Predicting User Interaction Time and System Energy Consumption during Application Design." In 2007 11th IEEE International Symposium on Wearable Computers. IEEE, 2007. http://dx.doi.org/10.1109/iswc.2007.4373782.

Lin, Bisen, David Coe, and Richard Harris. "Influence of Residual Stress on Casing Collapse Performance under External Pressure." In Offshore Technology Conference. OTC, 2022. http://dx.doi.org/10.4043/31983-ms.

Soares, Liliana, and Ermanno Aparo. "The Concept of Tantra as Meta-Design to Create Sustainability." In 13th International Conference on Applied Human Factors and Ergonomics (AHFE 2022). AHFE International, 2022. http://dx.doi.org/10.54941/ahfe1001422.

Lu, Peixian, and Liang Ma. "Support from conversational agent on daily stress for user satisfaction improvement." In 15th International Conference on Applied Human Factors and Ergonomics (AHFE 2024). AHFE International, 2024. http://dx.doi.org/10.54941/ahfe1005419.