To see the other types of publications on this topic, follow the link: Kontaktní plocha.
Dissertations / Theses on the topic 'Kontaktní plocha'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the top 50 dissertations / theses for your research on the topic 'Kontaktní plocha.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.
1
Strach, Andrej. "Prognóza přípustných limitů zatížení zemědělských pneumatik." Master's thesis, Česká zemědělská univerzita v Praze, 2016. http://www.nusl.cz/ntk/nusl-257730.
Full textAbstract:
The main objective of this thesis is the analysis and comprehensive review of agricultural tires designed for agricultural tractors highest performance class. Another part deals with the description and evaluation of major parameters for calculating the contact surfaces of tires with respect to an individual combination of inflation pressures and loads. The first part was prepared by literature review. Followed by laboratory testing focused mainly on determining the tire contact area with respect to an individual combination of inflation pressures and loads. The first part of the testing procedure was aimed at verifying the functionality and accuracy of the Plantograf. The second part of the test procedure included the estimate of the relationship between the wheel load and pressure distribution in the contact area of the tread of the tire under static loading. The last part of the test procedure consists in comparison of static and dynamic load tires. The measured and calculated values were processed into the relevant tables and graphs.
2
Palán, David. "Testovací zařízení kluzných ložisek." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-232132.
Full textAbstract:
This master’s thesis is focused on measurement of electrical contact resistance. The beginning of the thesis is devoted to the introduction of the electrical contact resistance and electrical parameters of journal bearings. Next part of the thesis deals with engineering design of test rig. In order to verify functional measurement principle, the test rig based on engineering design has been made. In the end of the thesis the measuring devices and the measuring process is described. The measurement results from the test rig are presented.
3
Šich, Pavel. "Motel." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-226701.
Full textAbstract:
The project was prepared with complete documentation of a new Motel at the level of building construction documentation. Motel has a capacity of 25 double beds and one single bed for the disabled. Built-up area is 984,2 square meters. Enclosure is designed as a flat roof. The supporting structure of the building consists of prefabricated reinforced concrete frame. Building design emphasizes on static solution and layout, fire safety, energy saving and safety of use. Drawings were processed in software for design - AutoCad
4
Dědičová, Helena. "Minipivovar." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227743.
Full textAbstract:
This thesis deals with the design of brewery in Litomyšl. Brewery with beer production 2000hl per year and restaurant for 140 guests and kitchen have the main function of the building. The building is designed as one construction object and its built-up area is 472,2 square meters. The building has a partial basement, two floors and it has structural masonry system. A load-bearing walls of two floors are formed by clay masonry and the load-bearing walls of the basement are formed by permanent formwork. A roof of the building is a flat roof with a slope of 3 percent and the finish is made of modifed bitumen membrane.
5
Matiash, Dmytro. "Opravy kontaktních ploch součástí pomocí technologie studené kinetizace." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-416612.
Full textAbstract:
The aim of this master’s thesis was to evaluate cold spray technologies as an alternative method of repairing contact surfaces of parts, especially made of high-alloy manganese steels, to choose a suitable system of materials and to analyze the properties and structure of the produced coating. The thesis presents the basic of the mechanism of cold spray deposition, the described influence of basic process parameters on the structure and properties of metal coatings. Performed analysis of chemical composition, structure, porosity, hardness and strength of AISI H13 steel coating on a high-alloy manganese steel substrate. The described dependence of the structure and properties of a given coating on the heat treatment regime.
6
Vaníček, Martin. "Městský úřad Nový Bydžov." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2020. http://www.nusl.cz/ntk/nusl-410106.
Full textAbstract:
Diploma thesis is about design and making of execution project for office city building which is located in Nový Bydžov. The building is located in the late brownfield area of Dufek´s wood manufacture, which is on the south part of Nový Bydžov. The building has four above ground floors and one below ground floor. The building shape is rectangular of dimensions 53,02 x 17,62 m. On the south, west and east is the façade from height of second floor slightly cantilevered. On the east part the edge of cantilevered façade duplicate slopping edge of the bottom land and it creates wonderful but economical shape. The height of the building from the ground is 14,5 m. The shape of roof is flat, covered with the mPVC foil and gravel mound. Façade which covering the first ground floor is made of polystyrene with thin layer of plaster which creates building plinth. Top cantilevered façade is made of ceramic tiles of dimensions 1200 x 600 mm which are suspended behind the air layer. The ceramic tiles are light brown color. In the bottom part are glazed areas of rectangular and square shapes to create the open feeling in the ground floor. In the rear part is designed coffee bar with nice outside wooden terrace. Windows in the top cantilevered part of the façade are the circular shape and extend the architectural impression of the building. All windows are in the same color of dark blue. The steel parts of the building are also dark blue color. In the bellow ground floor are designed underground parking lot with the maximum capacity 29 cars and technical equipment. In the first floor above ground are designed reception, big lecture hall, exhibition hall, coffee bar with terrace and toilets. In the second floor above the ground are offices, computer room and HVAC equipment. In the third above floor are offices, conference hall, and IT equipment. In the fourth floor above the ground are also offices, maintenance room and storage of furniture.
7
Novotná, Petra. "Bytový dům." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-226232.
Full textAbstract:
This diploma thesis solver the newly apartment building in Kuřim. It is a building with tree floors and basemet. The claccing of Porotherm 300mm and is insulated by contact insulation. The roofs are flat. The windows are plastic. In the basement asre garages, cellars, technical room and bicycle room. The other floors are flats.
8
Bína, Vojtěch. "Hotel Artia." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-239948.
Full textAbstract:
The final thesis „Hotel Artia” is processed in the form design documentation for building construction. The building of hotel is located on plot no. 443/1 in Červená Řečice. The building has four-storey part of hotel and single-storey part of restaurant. Structural system is RC frame. The building has warm flat roof and contact thermal insulation.
9
Janoušková, Dominika. "Novostavba mateřské školy." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2017. http://www.nusl.cz/ntk/nusl-265309.
Full textAbstract:
The thesis deals with the desing of new kindergarten in Hlinsko. The building is on the outskirt of the Down, street Družstevní. The house is basementless, has twou floors and a flat foor. The building is made from constructional system Porothem, the facade is designed with an external thermal insulation composite system. On the firt floor there are a childrenś department and technical department with kitchen. On the second, there are two childernś departments. The building is processed in the Archicad 14.
10
Paul, Zbyněk. "Základní škola v Moravanech u Brna." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227658.
Full textAbstract:
A theme of this diploma thesis is a primary school. The thesis is composed of a form of a project documentation. The building is situated in Moravany u Brna, on a plot 1013/122. It is placed on a slightly sloping terrain. It is a two-storeys building without a cellar. There are classes, a catering part, an administrative part and a section for sports in the building.
11
Hantscherová, Lucie. "Polyfunkční dům." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-226120.
Full textAbstract:
This Diploma thesis deals with the topic of multifunctional house. The building is situated on the street Pod Studánkou in Pardubice. This house is brand new building, four-storey, basementless, with a single layered flat roof. Height of the house is 13,580 meters. On the first floor there is technical hinterland and commercial places for a rent. On the second, third and fourth floor there are situated thirteen flats for a living. The foundations of the house are made of concrete C16/20. The bearing walls are made of masonry Porotherm. The external bearing walls are combined with the contact thermal-insulation. Windows and doors are triple glazed with a thermal-insulation.
12
Hradečný, Tomáš. "Krematorium." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-225778.
Full textAbstract:
In this thesis project is developed for the implementation of new build crematorium in Austerlitz. It is situated in a quiet area on the outskirts of town, at the intersection of roads from Brno and Křenovice. When designing the building, emphasis is placed on the longitudinal axis symmetry object. The building is single-storey, semi-basement. The roof structure is designed with three different height levels, except where the input parts and components for guests is located lowest flat roof, a second, higher level flat roof above the crematory facilities at the rear. Above spaces funeral parlor is the highest, the dominant part of the roof, which is of trusses and is pitched. The basic construction of the crematorium are bearing walls of ceramic bricks, are used in the basement concrete perimeter wall. The exterior walls are used insulation system.
13
Vlčková, Bára. "Penzion." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2017. http://www.nusl.cz/ntk/nusl-265253.
Full textAbstract:
This bachelor thesis is a project of new five-storey, semi basement guesthouse in Opava. This guesthouse will be used for accommodation, catering and recreation. Accommodation capacity is 21 people. In the basement is a technical background. The first floor is designed for the overall run of the guesthouse, staff, catering and sports. In the second and third floor are rooms for guests. Almost every room has a balcony. In the fourth floor is a common room with adjoining terrace. The building is brick. The vertical structures are made of ceramic blocks. Outer walls are insulated by outer contact system. The ceilings are mostly ceramic-concrete and a smaller part of the reinforced concrete. The guesthouse is roofed by single-flat roof.
14
Pecháčková, Žaneta. "Budova obecního úřadu v Bludově." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2020. http://www.nusl.cz/ntk/nusl-410075.
Full textAbstract:
This diploma thesis deals with the design of a new building of the municipal office building in Bludov, at the level of design documentation for the construction. The building consists mainly of offices for the operation of the municipal office, on the first floor there is a municipal library for the public. The building is designed on a slightly sloping plot with entrance from the east side. The building consists of three above-ground floors and one underground floor. Design documentation for building construction is processed in the computer program ArchiCAD.
15
Machatka, Petr. "Hotel na Vysočině." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-226406.
Full textAbstract:
The master thesis named Hotel at Vysočina solves project documentation in the degree for building construction. The hotel has three floors. The object is without a cellar. As roofing is used a flat and oblique roof. Walling system is called POROTHERM with contact insulation from expanded polystyrene EPS-F.
16
Šnircová, Monika. "Studentské bydlení." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-240295.
Full textAbstract:
The aim of the project is student housing in Brno, which is in the administrative area of Pole.The building has four floors above ground and it is mounted on slightly sloping land. The main entrance is a follow-up to the entrance hall, where is the reception with twostaircases, which are on north side. There is the technical part of the building on the first side, lodging for 2 personswith reduced mobility, studyroom , game room and grillbar. The remaining three floors are designed as a cellular system of accommodation for university students. Every unit of them is designed for four students. The every unit of them has a hall, bathroom, toilet and kitchen. Total capacity is 98 students. The bearing system of the building is monolithic concrete skeleton with filler external walls, which are made of aerated concrete blocks. The building is coveredby flat single roof. The cladding is designed as a contact insulation system ETICS.
17
Pospíchal, Libor. "Hasičská zbrojnice." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2020. http://www.nusl.cz/ntk/nusl-410079.
Full textAbstract:
Subject of this thesis is elaboration study and project documentation of new firehouse building type P in Polná. New firehouse building is designed instead of the original firehouse, which was in poor technical condition and didn’t meet the new requirements. The firehouse is situated on the plot number 91/5 with adjacent numbers 91/11, 91/10, 91/7, 91/8, 91/9, 91/6, 2684, 2693. The land is slightly sloping. The building is detached, partially basement and with three aboveground floors. The vertical load-bearing structure in the basement consists of masonry from permanent formwork and in the aboveground floors the sand-lime masonry YTONG SILKA. Horizontal load-bearing structures are designed from prestressed panels Spiroll. The roof is designed as single-skin flat roof with a poured cementitious foam layer. Firehouse consists of two parts – administrative-operational part and garage of emergency vehicles with appropriate stores. The main entrance and exit of vehicles are situated southwest. The administrative of firehouse is on the 3rd floor. Fire brigade rooms are on the 2nd floor, locker rooms with clothing stores are on the 1st floor. The technical background is designed on the underground floor. Garage parking space is situated over two floors and is roofed by flat single-skin roof. Project documentation is designed according applicable laws, decrees, regulations and technical standards.
18
Charvátová, Eliška. "Městská knihovna Ivančice." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-225764.
Full textAbstract:
The master´s thesis - City Library Ivančice - is drafted as a building documentation under relevant laws and standarts. The project processes documentation of a new house of publick building. It is designed as a reinforced concrete frame with, filled with brickwork and contact insulation. The building contains basement and three aerial floors. The roof is designed as single layer flat roof.
19
Plachetský, Jiří. "Polyfunkční dům." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-226204.
Full textAbstract:
Master’s thesis describes project documentation of a multifunctional house in Velké Meziříčí. It is the four storey basementless detached house. There are two shops, cafe and flat facilities on the first floor and 10 flats on the other 3 floors. The brick-built building consists of Diton and Heluz brickwork system insulated with Baumit external thermal insulation system. The house is covered by single ply roofing.
20
Mňuk, Václav. "Bytový dům, Náchod - Tepenská." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-226673.
Full textAbstract:
The purpose of the master thesis is the Residential house, Nachod - Tepenska. The building is situated near by the city center of Nachod. It contains 6 floors. In the first floor there are two comercial areas, technical room and parking lot. The roof of parking lot serves as a terace for the second floor. In other floors are situated flats. Whole building is covered by flat roof. The ETICS is applied. The insulation from mineral wool is used. The master thesis includes the blue prints of the building.
21
Šťastný, Marek. "Bytový dům." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-240093.
Full textAbstract:
The subject of my diploma thesis is elaborating the project documentation for making a new building of a separately standing apartment house. The building is situated on the outskirts of town Bystřice nad Pernštejnem, on a slightly slanting land which goes up to the northeast. The building is without cellar, four-storeyed with a flat roof. On the first floor above ground level there are an indoor garages, cellar units, a staircase and an elevator. On the second, third and fourth floor above ground level there are separate housing units, a staircase and an elevator. There are other parking areas on the exterior of the building. The vertical constructions are designed within the system HELUZ, the horizontal constructions are made of ferroconcrete. The perimeter structures are designed with the contact insulation system. The building will be based on foundations.
22
Pustějovský, Jakub. "Administrativní objekt ve Fulneku." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2018. http://www.nusl.cz/ntk/nusl-372325.
Full textAbstract:
The subject of this thesis is to create a project documentation of the design of a new office building construction in Fulnek – Jerlochovice. The building is located between residential and industrial zone. It has three aboveground levels. There is a technical backgroud, toilets, archive, rest zone for employees and two openspace offices located on the ground floor. The second floor is designed on the same basis. There are two openspace offices situated on the west side, background for company managment, toilets and day room with kitchen. The third floor is designed as conference room with kitchen and toilets. Construction system is cast-in-place concrete frame. The building is roofed with the flat roof. Foundations are made of one-stage concrete footing.
23
Olžbut, Peter. "Bytový dům." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-226123.
Full textAbstract:
Master's thesis - Apartment house - is drafted as building documentation under relevant laws and standarts. The project processes documentation of a new Apartment building. It is designed as a brick building with basement and three aerial floors. The roof is designed as a flat and walkable roof.
24
Pánková, Aneta. "Mateřská školka." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2017. http://www.nusl.cz/ntk/nusl-265502.
Full textAbstract:
This thesis solves the desing documentation for implementation of kidsgarden. The land is situated in the village Kramolna. Land is oriented to the southwest. The kidsgarden is detached as two-store building without basement. In kidsgarden there are designed three departments for children´s stay and multipurpose hall. The total projected number of children is 60. The building is founded on footings and covered with a flat roof. The building project is completed in accordance with layout, architecture and structural design and safety in use.
25
Tomíček, Dominik. "Zdravotní středisko." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2018. http://www.nusl.cz/ntk/nusl-372191.
Full textAbstract:
In my diploma thesis I drafted a layout of a medical facility of emergency care in the town Kravaře. I focus on a choice of an appropriate structural design and processing of the design documentation for the construction in accordance with the laws, bylaws and the technical standard. The building is a standalone three stories building without cellar and with a flat roof. There are 16 medical units, a pharmacy and an optician. The construction is based on reinforced concrete foundation slab and walled with sand-lime blocks. The ceiling is constructed from cast-in-place reinforced slab. The façade is made of combination of ventilated façade with fibre-cement board paneling, insulation system and a glazed area with sunscreen. The construction is roofed with a warm flat roof. The openings in the external walls are designed as aluminum infills.
26
Ingr, Jakub. "Mateřská školka." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2020. http://www.nusl.cz/ntk/nusl-410011.
Full textAbstract:
The aim of the diploma thesis is to elaborate the project documentation of kinderschule in the city Bucovice. The house is as a detached house in a newly-built area. The object is double-storeyed and without basement. It has rectangular size and is covered with a flat one coat roof. On the first floor there is one nursery department for eighteen children and technical facilities, on the second floor there is also one nursery department for eighteen children, a multipurpose hall and the head office. The house is build from brick with a contact thermal insulation system. Part of the project documentation is also a basic assessment of the building in terms of building physics.
27
Pavlů, Iveta. "Mateřská škola v Sedlejově." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-226398.
Full textAbstract:
The master thesis with the name Nursery school in Sedlejov solves project documentation in the degree in building construction. Nursery school has two floors. The object is without a cellar. As roofing is used a flat roof. Walling system is called POROTHERM with contact insulation from mineral cotton wool.
28
Pražan, Tomáš. "Bytový dům." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-240334.
Full textAbstract:
The main goal of this diploma thesis „apartment building“ is create project documentation for building construction. This apartment building located in Policka's suburb is designed for 32 people living in 8 apartments. The building is designed as detached house on four floors, without basement. The first floor above the ground is used as a apartment for handicapped people, common rooms, cleaning room, maintenance room, and garages for 5 cars. In the second floor above the ground there are apartments. In the last floor above the ground there are entrance to rooftop and an apartment for 7 people. All floors are connected with staircase and elevator. Bearing and partition walls are lined with ceramic bricks Heluz, heating contact system. Ceiling panel system is designed Spiroll. The roof is flat.
29
Veleba, Jakub. "Objekt věznice v Moravských Budějovicích." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-240437.
Full textAbstract:
Theme of this diploma thesis is a newly buil building of prison in Moravské Budějovice. The buiding has four ground floors and is without cellar. The structural system of the building is made up of permanent formwork and system Porotherm. Ceiling construction is made up of reinforced hollow core slab. The building is covered with a flat roof.
30
Kratochvíl, Jakub. "Domov důchodců." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2018. http://www.nusl.cz/ntk/nusl-372179.
Full textAbstract:
The topic of this thesis is a project documentation of a Retirement home located in Prague in Novodvorská street. The building is designed as a stand-alone building with five floors of a rectangular ground plan with a receding fifth storey. The retirement home is divided into a public section - a pharmacy and a part for clients - accommodation, leisure time including facilities - a restaurant with a kitchen, a laundry room. The construction system is designed as a reinforced concrete monolitic skeleton with rectanguplar columns and the filling structures are made of ceramic blocks. The building is based on reinforced concrete footings. A waterproof concrete is proposed for the lift shaft, and the foundation sills are designed for the perimeter masonry. Roofing of the 4th and 5th floor is a warm flat roof. In the 4th floor roofing section, the roof is made as a concrete tiles paving. The main entrance to the building is from southwest and the access to the building is from the northwest side where there is a parking lot for employees and clients.
31
Mikesková, Zuzana. "Dům na půli cesty." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227535.
Full textAbstract:
The project addresses the social construction located in Frýdlant nad Ostravicí. The proposed building is called: Halfway House. The building is brick with contact insulation, has three floors and a basement. Roofed building is solved by a flat roof. The building contains 11 residential units and two private establishments. The object is fitted into a planar ground. In the basement there are storage rooms, technical facilities and ceramic workshop for leisure activities. On the first floor there is an area reserved for the space of two establishments, which are psychological and legal counseling. There is also wheelchair accessible studio facilities and operation of sanitary facilities. In the second and third floor there is a one-room for hotel and common areas.
32
Havlíček, Jiří. "Polyfunkční dům v Táboře." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227789.
Full textAbstract:
The thesis “Multifunctional building in Tábor” is processed in the form of project documentation which comprises of all the requisites required by current regulations. Designed multifunctional building is placed at the site number 1475/1 in Tábor. The building has four floors. There are 18 flats and 4 commercial premises in the facility. Constructional system is made of lime-sand bricks, prestressed concrete ceiling panels, flat roof. Building has a contact thermal insulation system.
33
Kliment, Daniel. "Sportovní zázemí tenisového klubu." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2017. http://www.nusl.cz/ntk/nusl-265430.
Full textAbstract:
The subject of the thesis to this is newly built sports facilities tennis club in Brno Pole. The building has a basement and three floors. The main entrance to make the building is from the west side of the level 1.NP. At the bottom of the building is the location of facilities for athletes. On the top floor located facilities for staff and snackbar. Vertical and horizontal structures are mostly made from ceramic system components Heluz. The staircases are monolithic reinforced concrete. Part of the new buildings are complete aluminum construction, plumbing, others, carpentry, locksmith's products. The project was evaluated by computer program AutoCAD.
34
Toman, Michal. "Minipivovar v Hodoníně." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-225858.
Full textAbstract:
The content of this thesis is the documentation for the project of Microbrewery in Hodonin. This microbrewery is a detached building on building plot in the urban area of Hodonin. In the building is located a microbewery with planed beer production 3500 hl per year and restaurant for 150 guest with the summer terrace planed for 35 guests. Building is a ground floor structure with cellar under the part of it. The ground floor is divided into the section for guest and a part for restaurant’s services with kitchen, storages and background for employees. In the restaurant is located a brewhouse which is a heart of the object. Microbrewery – fermenting room, lager cellar, tank cellar, boiler room, engine room for ventilation, storage of barrels and drinks are located in the basement. Bearing system is formed by walls- in the ground floor by ceramic blocks and monolithic concrete walls, in the basement by the concrete formwork blocks. The building is insulated. The roof above the kitchen and the restroom for guests is a flat roof. The roof above the restaurant consists of a wooden chest nailed trusses with a slope of 4%. As the roof covering is used a PVC foil
35
Junková, Pavlína. "Polyfunkční dům v Červeném Kostelci." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227184.
Full textAbstract:
The Master's thesis deals with a new mixed-used building. The mixed-used building is situated in Červený Kostelec, 17. listopadu street. It is a three-floor building without a cellar and with a flat roof. The object is designed from ceramic cider blocks Porotherm and it is thermally insulated by contact thermal insulation system. On the first floor there are workshops – information centre, beauty salon, café, one dwelling unit for disabled people and the cellar. On the second floor there are offices, gallery and two dwelling units. On the third floor there are five dwelling units. Whole project is created in ArchiCad 14.
36
Krchňák, Petr. "Wellness centrum." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-240489.
Full textAbstract:
Diploma Thesis “Wellness centre“ is processed in the form of detailed project documentation which contains all requirements in accordance with applicable standards and regulations. The proposed design of the object is a three-storey building. The building will serve as a place for relaxation and sport. Technical facilities, staff room, changing rooms and fitness centre are located in the basement. The café and wellness is situated in 1PP. The offices for administration of the building, massage rooms, tanning salon, changing rooms and fitness hall are located in the 2nd floor. The building is based on foundation footings and load bearing walls are based on foundation strips. Support system of the building is a combined construction system of the walls and columns.
37
Veselský, Jaroslav. "Motel." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-240101.
Full textAbstract:
The subject of this diploma thesis is designing a new building of Motel in Mikulov in Moravia. The object is located near a road in the suburbs. The land is in a sloped terrain. The object has three aboveground floors. In the first floor there is a restaurant including a kitchen and the background. There are two barier free rooms for accommodation as well. In the second floor there are eight double rooms. In the western part of the object there is a multipurpose hall including its own backgroud. In this floor there are recreation rooms to be found – a library and a children’s club. The third floor consists of eight double rooms too. Some space in this floor is used for technical purposes (air conditioning equipment). The motel‘s operational part is made of cloakrooms for stuff, technical rooms and a warehouse. The construction of this building is bricked using the Porotherm system. There is flat single vegetation roof or classical-structure roof used. The building is based on base band. The perimeter wall is insulated using contact insulation ETICS system. The drawings are processed in ArchiCAD 17.
38
Šindlář, Josef. "Ubytovací zařízení." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2019. http://www.nusl.cz/ntk/nusl-392244.
Full textAbstract:
The subject of this master thesis is a project for the construction of accommodation facility with a basement. The building is located in Ostrava close to the historical centre of the city. The building is a 4starcategory accommodation facility and will serve as temporary accommodation. There will be a restaurant and a gym designed for hotel guests only. The accommodation capacity is 68 guests. A car park for hotel visitors is situated close to the hotel. It is a brick structure made of sand-lime blocks,monolithic ceilings and a first underground floor. The building is insulated with ETICS system. Paste-like plaster and brick tapes were used for facade construction. The roof is made up of one roof surface and the foundation will be realized on the foundation strips. The building is situated on flat terrain. The project was developed in ArchiCad21, AutoCad 2016 and SketchUp.
39
Vdovina, Mariia. "Novostavba komerčně-administrativního centra v Ostravě." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2021. http://www.nusl.cz/ntk/nusl-432502.
Full textAbstract:
This diploma thesis deals with the project documentation of a new building of a commercial-administrative center in Ostrava. The building has a partial basement, the maximum number of floors above the ground is 3. The building contains several categories of areas. The largest of them are office space and restaurant area. The total number of employees of the center is 73, including 63 administrative staff and 10 people serving the restaurant. The building also houses sanitary facilities, areas for rest, food preparation, meeting rooms, storage areas and filing cabinets, rooms for technical equipment. The building has a skeletal frame system made of monolithic concrete. Perimeter masonry and interior walls are made of Porotherm bricks. The building is covered with a general and vegetation flat roof. The facade of the building is ventilated, clad with titanium-zinc panels DEKCASSETTE and DEKLAMELLA IDEAL. The building is insulated with ETICS contact system, thermal insulation boards made of mineral felt. The diploma thesis is processed in the stage of project documentation for the construction.
40
Kárníková, Iva. "Požární stanice." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-226556.
Full textAbstract:
Project documentation of new P3 type firehouse is presented in this master thesis. Firehouse’s design is in accordance with ČSN 73 5710 Požární stanice a požární zbrojnice and includes premises for: administration, teaching, day and night emergency, gymnasium, firehouse’s workshop and garrage. Its structure is made of sand-lime brickwork wall system combined with system of reinforced concrete pillars. Ceilings are designed using prestressed hollow core slabs. Firehouse is completed by external wall insulation and single-coated roof.
41
Rolinc, Martin. "Sportovní centrum Všechovice." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2019. http://www.nusl.cz/ntk/nusl-392051.
Full textAbstract:
This diploma thesis deals with the design of a new sports center, which is situated in the cadastral unit of the village Všechovice 787086 (district of Přerov), on the plot number 163/1. The land is a planar character. It is a three floor building with two above-ground and partial basement. The construction is a square ground plan. The building is based on the strips foundation and foundation pads. The wall structural system consists of sandstone km beta sendwix blocks. The frame structural system is made up of reinforced concrete columns and beams, with the brickwork made of ytong classics. The external walls are insulated with a mineral wool insulation etics contact system. Ceiling structures are made of reinforced concrete slabs and wooden ceiling beams. The building is roofed with 3% flat roofs and part of the multipurpose hall is roofed with a curved, rolled roof. The diploma thesis is performed as a design documentation for the building process.
42
Bambasová, Petra. "Integrovaný záchranný systém - stanice typu P1." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2017. http://www.nusl.cz/ntk/nusl-265235.
Full textAbstract:
THE THEME IS OF THE STUDY AND DOCUMENTATION THE IMPLEMENTATION OF THE CONSTRUCTION OF THE NEW BUILDING OF THE INTEGRATED RESCUE SYSTEM – STATION TYPE P1. THE FIRE STATION IS DESIGNED INTO THREE OPERATING UNITS. THE MAIN ACCESS TO THE BUILDING IS IN THE 1ST FLOOR ADMINISTRATIVE AREA IN THE SOUTH-EAST SIDE OF THE BUILDING. THIS PART OF THE BUILDING HAS 2 FLOORS. THE OBJECT CONTINUES TO THE SOUTHEAST TOWARDS THE PATH OF THE GARAGE WITH 5 SPACES. ON THE NORTHWEST EDGE OF THE OBJECT IS A TECHNICAL BACKGROUND WITH A DISHWASHER AND A DRYER. TO DEVELOP OVER THE OBJECT PERSONAL VISITS FROM TWO FIRE STATIONS. ONE REGIONAL IN CESKE BUDEJOVICE AND SECOND DISTRICT IN TÝN NAD VLTAVOU. FOR INSPECTION AND UNDERSTANDING PROPOSAL FOR A NEW FIRE STATION ALSO HELPED TOUR OF DOCUMENTATION PROJECT ALREADY MADE ON CONSTRUCTION FIRE STATION IN MARIANSKE LAZNE AND FRYMBURK.
43
Fučík, Lukáš. "Polyfunkční dům ve Svitavách." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2017. http://www.nusl.cz/ntk/nusl-265344.
Full textAbstract:
This project deals with a design of a multifunctional house in Svitavy. The object is designed as a building without a basement, detached house with four above-ground floors. It is fitted into flat terrain. Newly built multifunctional house serves two main functions. The first is the creation of nine housing units, which are accessible from the central staircase and have an individually designed entrance. The second function of the new building is commercial utilization. There are three business premises in the house, each of them has its own sanitary facilities and separate entrance. The roof is designed as single-layered, flat, composed of asphalt strips. The structural system of the building is brick, made of ceramic blocks. The building is insulated with a contact insulation system.
44
Cabejšek, David. "Mateřská škola Modřínová." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2020. http://www.nusl.cz/ntk/nusl-409981.
Full textAbstract:
Main aim of this master’s thesis is to create a project documentation to conduct construction work on the new building of the kindergarten, which is located in Moravany near Brno. Intention of this work is to create functional dispositional solution for day-to-day operation. Kindergarten is designed for educating and raising up to 40 children. Space for hobby classes is part of the object. This object has two above-ground floors and has no cellar. The load bearing masonry is designed from sand-lime blocks and the whole object will have contact thermal insulation system. The roof is designed as warm flat roof. The floor structures form from prestressed ceiling panels. The staircase is designed as half-turn stair from reinforced concrete. This object is based on the foundation strips.
45
Slezáková, Tereza. "Polyfunkční dům." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2020. http://www.nusl.cz/ntk/nusl-410093.
Full textAbstract:
This diploma thesis depicts project documentation for realization of a mixed-use building in Hradec Králové. The designed object includes fifteen flats in four storeys, a café, a hairdressing salon and no cellar. Vertical load-bearing walls of the first storey are designed to be built of reinforced concrete. Vertical load-bearing walls of the other storeys are designed to be built of ceramic blocks. The outside wall is insulated with expanded facade polystyrene and plastered with a thin-layer textured cream plaster. The last storey has a ventilated facade made of fibre reinforced concrete panels. The openings are filled with plastic windows including an aluminium entrance door with a fanlight. Horizontal constructions are made of monolithic reinforced concrete panels which are reinforced in one dimension. The roofing in designed as a flat roof with a layer of vegetation. The foundations of the multifunctional house are based on concrete piles and a reinforced concrete slab. The design of the object respects current housing in the area. The diploma thesis includes a basic review of construction physics and fire safety layout.
46
Vaňousová, Martina. "Ubytovací zařízení se zázemím pro děti bez domova a sociálně potřebné." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2018. http://www.nusl.cz/ntk/nusl-372268.
Full textAbstract:
Thesis Accomodation premises designed for homeless children and low-income people at the documentary for execution of works. The building was designed so that the object is divided into two parts. The first part is a home for homeless children, which is developed to the level of documentation for construction. The secon part is a started flats, which is designed only as a preparatory study and work. The building is brick of brick blocks. Foundation structures bearing walls ale designed footings. Roof construction is designed flat. The building has four above-ground floors and cellar. The building is insulated exterior contact insulation.
47
Rachůnková, Radka. "Polyfunkční dům." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2019. http://www.nusl.cz/ntk/nusl-392178.
Full textAbstract:
The subject of this thesis is the development of project documentation for the construction design of the mixed-use building in Třebíč, in the borough of Na Kopcích. The building has four above-ground floors. On the first floor there are shops, specifically a hairdresser and a café, and the technical background of the house. The second to fourth floors are made up of residential units and a storeroom is built to each apartment on the floor. There are 4 flats 2 + kk, 4 flats 3 + kk and 3 flats 4 + kk. The roof structure is designed as a warm flat green roof. Construction system is wall, masonry from clay blocks.
48
Karásek, Adam. "Penzion." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2020. http://www.nusl.cz/ntk/nusl-410021.
Full textAbstract:
This diploma thesis solves a project documentation of boarding house and contains appurtenances according to valid regulations. The house is as a detached house, without basement. It has rectangular size and is covered with a flat one coat roof and saddle roof with truss girders. The house has three floors with terrace. On the second and third floor is 14 guest rooms with social rooms. On the first floor is: pram room, bicycle/ski room, reception, utility rooms, wellness, restaurant, kitchen. In the house is designed a elevator. The house is brick with a contact thermal insulation system. Ceiling constructions are from prestressed panels. The house is designed on sloping terrain from south to north.
49
Trtoňová, Lucie. "Mateřská škola ve Zbýšově." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2020. http://www.nusl.cz/ntk/nusl-410104.
Full textAbstract:
ABSTRACT The scope of this Diploma thesis is create the detail design documentation for building of new nursery school in Zbýšov. The two-storey building with partial basement is located southwest and has a regular ground plan. There are four departments for children of the age from 3 to 6 years, administration part with language classroom and speech therapy classroom, offices and facilities for teachers, cafeteria and technical part located on the first floor. The building is constructed of Porotherm 30 Profi, Porotherm 30 AKU bricks and is built on concrete strip foundations. The perimeter of the basement is created by the vertical load-bearing walls made of reinforced concrete bricks. There is used the certified external thermal insulation composite system. The internal non-load masonry is designed from Porotherm 14 Profi and Porotherm 11,5 AKU. The horizontal load-bearing ceiling construction is made of pre-stressed reinforced concrete panel Spiroll. The stairs are monolithic, made of reinforced concrete. The flat roofs are designed with using of extensive green roof system.
50
Smolíková, Zuzana. "Novostavba hotelu." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2020. http://www.nusl.cz/ntk/nusl-410094.
Full textAbstract:
The subject of the Diploma thesis was to design and prepare a documentation for the construction of a spa hotel. The building is situated in the village of Lipno nad Vltavou. This area is famous for a ski resort and the Lipno Dam which can be seen from the hotel. The hotel consists of three operating parts - spa, restaurant, accommodation and recreation area. The whole complex is designed as two rectangular plans. The spa part is a one-storey building with a flat green roof. The hotel with restaurant is a three-storey building with a pitched roof and metal roofing. The main entrance is oriented to the north. In front of the building there is a parking space for hotel guests. The spa structural system is a mix of a reinforced concrete frame with beam and a wall system made of clay blocks Porotherm. The hotel and restaurant is a wall structural system made of clay blocks Porotherm. The floor structure is designed as reinforced concrete slabs. The whole building is insulated to meet all the requirements of energy consumption of buildings.