Academic literature on the topic 'Korozní ochrana'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Korozní ochrana.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Korozní ochrana"

1

Krausová, A., M. Novák, J. Macák, and I. Kratochvílová. "Polykrystalická diamantová vrstva: vhodná ochrana povrchu zirkoniových slitin?" Koroze a ochrana materialu 59, no. 2 (2015): 50–52. http://dx.doi.org/10.1515/kom-2015-0012.

Full text
Abstract:
Polykrystalická diamantová vrstva (PCD) se jeví jako vhodná ochrana pro snížení chemické reaktivity zirkoniových slitin. Její aplikací by mohlo dojít k výraznému zvýšení odolnosti zirkonia proti vysokoteplotní korozi a rovněž vůči navodíkování. V této práci jsou zkoumány vzorky slitiny zirkonia Zry-2, které byly pokryty 300 nm tenkou vrstvou PCD a pre-exponovány v páře o teplotách 950 a 1150 °C. Pomocí ex-situ elektrochemické impedanční spektroskopie jsou studovány přenosové parametry a morfologie PCD vrstvy. Výsledky ukazují, že vzorky slitiny zirkonia Zry-2, které byly pokryty PCD vrstvou, k
APA, Harvard, Vancouver, ISO, and other styles
2

Ptak, Stefan, and Kamil Pomykała. "Problemy korozyjne w przemyśle rafineryjnym." Nafta-Gaz 78, no. 4 (2022): 312–23. http://dx.doi.org/10.18668/ng.2022.04.07.

Full text
Abstract:
Problemy korozji atmosferycznej i korozji związanej z oddziaływaniem różnych mediów w procesach technologicznych oraz towarzysząca im ochrona antykorozyjna metali występują we wszystkich dziedzinach techniki. Korozja atmosferyczna powoduje największe straty ekonomiczne spośród wszystkich znanych rodzajów korozji, a podstawowe znaczenie dla jej przebiegu ma tlen, który jako akceptor elektronów wywiera zasadniczy wpływ na korozję metali. Następnym czynnikiem mającym wpływ na korozję jest woda, która gromadzi się na powierzchni metali. Obecność ciekłej warstewki wody na powierzchni metalu powoduj
APA, Harvard, Vancouver, ISO, and other styles
3

Frydrych, Jarosław, and Monika Ziółkowska. "Badanie skuteczności warstwy przeciwkorozyjnej wytworzonej przez olej ochronny o niskiej lepkości w warunkach polowych." Nafta-Gaz 76, no. 12 (2020): 969–76. http://dx.doi.org/10.18668/ng.2020.12.12.

Full text
Abstract:
Zjawisko korozji atmosferycznej metali przynosi znaczne straty ekonomiczne w gospodarce większości krajów rozwiniętych. Chcąc je zmniejszyć, opracowano wiele metod ochrony powierzchni metali przed korozją, wykorzystujących zjawiska fizyczne, jak i reakcje chemiczne. Jedną z metod opartych na zjawisku fizycznej ochrony jest ochrona czasowa metali środkami smarowymi, tj. smarami plastycznymi oraz olejami smarowymi – ochronnymi. Smary plastyczne charakteryzują się bardzo dużą lepkością kinematyczną i wytwarzają szczelne i grube warstwy ochronne na powierzchni metali. Oleje ochronne przeznaczone d
APA, Harvard, Vancouver, ISO, and other styles
4

Bystrianský, J., V. Šefl, P. Sajdl, J. Fojt, and P. Bábková. "Influence of surface state of high alloyed creep resistant steels on their oxidation resistance." Koroze a ochrana materialu 58, no. 1 (2014): 19–30. http://dx.doi.org/10.2478/kom-2014-0003.

Full text
Abstract:
Streszczenie Podmínky aplikace vysoce legovaných austenitických ocelí lze rozdělit podle charakteru a mechanismu tvorby ochranné vrstvy, která brání jejich intenzivnější celkové korozi. Při vzniku ochranné, pasivační vrstvy mechanismem nízkoteplotní oxidace (tj. do teplot 200-300°C) mají oceli charakter materiálů korozivzdorných. Při vyšších aplikačních teplotách, kdy ochranná oxidická vrstva má charakter oxidu vysokoteplotního (při teplotách nad 300°C), slouží tyto oceli jako materiály žárovzdorné či žáropevné. Dosažení optimální korozní odolnosti v obou aplikačních oblastech závisí mj. na st
APA, Harvard, Vancouver, ISO, and other styles
5

Kreislová, K., and V. Křivý. "Evaluation of corrosion resitance of weathering steel with 3 % Ni." Koroze a ochrana materialu 58, no. 1 (2014): 11–18. http://dx.doi.org/10.2478/kom-2014-0002.

Full text
Abstract:
Streszczenie V článku je porovnáváno korozní chování různých typů patinujících ocelí s novým typem oceli se zvýšeným obsahem niklu exponovaných na atmosférických stanicích v České republice a ve zrychlených laboratorních testech. Korozní úbytky po 1, 2 a 4 letech expozice v atmosférických podmínkách byl porovnán efekt obsahu SO2 a depozice chloridů s výsledky modifikovaných zrychlených korozních testů. Rovněž byly provedeny analýzy korozních produktů. Byla hodnocena ochranná účinnost vzniklých patin.
APA, Harvard, Vancouver, ISO, and other styles
6

Barszcz, Piotr. "Badania korozji atmosferycznej z wykorzystaniem stałych stacji korozyjnych." Research Works of Air Force Institute of Technology 30, no. 1 (2012): 5–23. http://dx.doi.org/10.2478/v10041-012-0001-5.

Full text
Abstract:
Terenowe badania korozji atmosferycznej [8, 14, 15] są to badania prowadzone w atmosferze ziemskiej w temperaturze otoczenia w celu określenia: odporności na korozję metalu, zanieczyszczenia środowiska produktami korozji, skuteczności ochrony przed korozją lub korozyjności środowiska [10, 12]. Przedmiotem prac zwiększających resurs statków powietrznych oraz ich eksploatację wg stanu technicznego są m.in. badania korozji w naturalnych warunkach atmosferycznych na podstawie wystawiania próbek materiałów i poddawania ich okresowym obserwacjom oraz oznaczania w ustalonych odstępach czasu wielkości
APA, Harvard, Vancouver, ISO, and other styles
7

Daňková, J., T. Majstríková, P. Mec, J. Ščučka, and P. Martinec. "Koroze kovových spojovacích prostředků ve dřevĕ modifikovaném silikony." Koroze a ochrana materialu 59, no. 4 (2015): 114–20. http://dx.doi.org/10.1515/kom-2015-0023.

Full text
Abstract:
Abstract Ochranné prostředky na dřevo ve stavebních konstrukcích mohou, za určitých podmínek, akcelerovat korozi kovových spojovacích prostředků. Fenomén koroze kovů v chemicky modifikovaném dřevě silikony je významným faktorem pro stanovení adekvátních pravidel pro uplatnění těchto materiálů v rámci stavební konstrukce. V článku jsou prezentovány výsledky experimentální studie vlivu dřeva modifikovaného komerčním prostředkem na bázi silikonů na vybrané kovy. Bylo testováno modifikované dřevo smrku ztepilého (Picea Abies L.), dubu (Quercus SPP.) a modřínu opadavého (Larix decidua Mill.) a kome
APA, Harvard, Vancouver, ISO, and other styles
8

Kreislová, Kateřina, Eva Kalabisová, and Hana Geiplová. "Specifikace znalecké činnosti v oboru koroze a ochrana proti korozi." Soudní inženýrství 30, no. 1 (2019): 25. http://dx.doi.org/10.13164/si.2019.1.25.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Minor, Tomasz. "Analiza szybkości korozji stali na podstawie badań korozji czujników korozymetrycznych zainstalowanych w ziemi." Nafta-Gaz 78, no. 8 (2022): 618–29. http://dx.doi.org/10.18668/ng.2022.08.06.

Full text
Abstract:
Gazociągi i konstrukcje chronione katodowo mogą być zainstalowane na obiektach złożonych w miejscach, gdzie znajdują się obce konstrukcje, żelbet, bednarka, inne elementy podłączone do oddzielnego systemu ochrony katodowej. Konstrukcje te mogą na siebie oddziaływać w sposób negatywny, nadmiernie polaryzując chronioną konstrukcję lub pobierając z otoczenia większość prądu dostarczanego z systemu ochrony katodowej. W wielu przypadkach instalacje są zbudowane wiele lat temu, choć zdarza się również, że obecnie projektowane i budowane instalacje ochrony katodowej nieskutecznie chronią konstrukcje.
APA, Harvard, Vancouver, ISO, and other styles
10

KLAKOČAR-CIEPACZ, MAGDALENA. "Czy potrzebne jest kształcenie inżynierów chemików w zakresie korozji i ochrony przed korozją?" OCHRONA PRZED KOROZJĄ 1, no. 8 (2022): 22–25. http://dx.doi.org/10.15199/40.2022.8.3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Korozní ochrana"

1

Kouba, Jan. "Korozní ochrana slitin hliníku." Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2012. http://www.nusl.cz/ntk/nusl-216890.

Full text
Abstract:
This diploma thesis deals with cerium-based conversion coatings for aluminium alloys. At first the mechanism of protection of metals by inhibitory substances is described in the theoretical section. The next chapter is devoted to application of lanthanide salts as cathodic corrosion inhibitors. Then the characterization of alloy AA 2024 follows. The main part is dedicated to the growth mechanism of the cerium-based mixed conversion coating on the alloy AA 2024. Finally, the factors affecting the character and the quality of obtained coatings are commented. In the experimental part an influence
APA, Harvard, Vancouver, ISO, and other styles
2

Šomanová, Pavlína. "Příprava a charakterizace vysoce hydrofobních povlaků na hořčíkové slitině AZ91." Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2021. http://www.nusl.cz/ntk/nusl-444211.

Full text
Abstract:
Magnesium and its alloys have many interesting properties and thanks to them it can be used in many applications (transport industry, medicine etc.). Disadvantage of these materials is their high corrosion rate. For this reason, there is an effort to achieve high corrosion resistance through different modifications of magnesium and its alloys. In recent years the superhydrophobization of the surface seem to be an attractive solution for this question. This type surface modification minimalize contact between the surface and water. In this diploma thesis the superhydrophobic surface was created
APA, Harvard, Vancouver, ISO, and other styles
3

Wejkowski, Robert. "Doskonalenie pierwotnych i wtórnych metod redukcji tlenków azotu." Praca habilitacyjna, Wydawnictwo Politechniki Śląskiej, 2019. https://delibra.bg.polsl.pl/dlibra/docmetadata?showContent=true&id=73324.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Matějka, Lukáš. "Protikorozní ochrana hořčíkových slitin ZE10 a ZE41 pomocí fluoridových konverzních povlaků." Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2018. http://www.nusl.cz/ntk/nusl-376811.

Full text
Abstract:
The diploma thesis deals with preparation of fluoride conversion coatings and evaluation of electrochemical corrosion characteristics of magnesium alloys ZE10 and ZE41 in SBF solution. The main aim of the work is to increase the corrosion resistance of the investigated magnesium alloys using fluoride conversion coatings. The influence of the conditions of the preparation of the conversion coatings on their morphology and the corrosion resistance of the coated alloys will be studied. The electrochemical corrosion characteristics of the magnesium alloys with conversion coatings will be evaluated
APA, Harvard, Vancouver, ISO, and other styles
5

Marek, Martin. "Progresivní bednící systém s protikorozní ochrannou funkcí." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2020. http://www.nusl.cz/ntk/nusl-409764.

Full text
Abstract:
Corrosion of reinforcement in reinforced concrete is a huge problem. Corrosion of reinforcement has a great effect on the service life of reinforced concrete structures. The subject of this work is to verify the inhibitors properties and their efficiency using physical and electrochemical methods. The aim of this work is the design of formwork panels with corrosion protection. The formwork panels are on different material basis. Corrosion protection is ensured by the use of migration corrosion inhibitors.
APA, Harvard, Vancouver, ISO, and other styles
6

Vrána, Tomáš. "Návrh sekundárního městského kolektoru s důrazem na ochranu před průnikem podzemní vody." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227276.

Full text
Abstract:
In the first part, the master’s thesis deals with the history of utility tunnels, methods of construction processes and materials from which they are built. It also mentions methods and materials which protect against the effects of groundwater. The thesis is mainly dedicated to the design and structural design of the secondary utility tunnel lining with an emphasis on protection against ingress of groundwater. The mathematical model was created in Plaxis 2DAE software.
APA, Harvard, Vancouver, ISO, and other styles
7

Taranza, Luboš. "Vývoj nových typů kompozitů pro sanace betonů se zvýšenou ochranou výztuže." Doctoral thesis, Vysoké učení technické v Brně. Fakulta stavební, 2017. http://www.nusl.cz/ntk/nusl-355594.

Full text
Abstract:
Around the world there is a great number of reinforced concrete structures, who´s life cycle, for which they were designed, is significantly shortened due to action of various aggressive environments, or due to defects created during the construction process. (i.e. insufficient steel reinforcement cover depth). One of the most common causes of problems in reinforced concrete structures is corrosion of steel reinforcement. It is necessary to repair structures degraded in this fashion and return them to their original state. We made a unique polymercement concrete repair system was developed wit
APA, Harvard, Vancouver, ISO, and other styles
8

Chára, Tomáš. "Impregnace korozivzdorných ocelí pro podmínky záoceánských plaveb." Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2013. http://www.nusl.cz/ntk/nusl-216993.

Full text
Abstract:
This thesis deals with temporary corrosion protection of stainless steel for the conditions of oversea sailing. At first the theoretical part describes types of the stainless steels focusing on their corrosion resistance and negatively or positively impacts affect of their resistance. There is also a proposal of methods of the temporary corrosion protection and testing its effectiveness. The recherché are summarized knowledge in testing resistance of stainless steels to pitting corrosion. The task of the study was to test the effectiveness of three different preservatives and comparing the qua
APA, Harvard, Vancouver, ISO, and other styles
9

Tomek, Jan. "Povrchová úprava kontejneru CASTOR." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230829.

Full text
Abstract:
Master’s thesis deals with the problems of the inner surface finish design for the CASTOR container. In the theoretical part are analyzed properties of metallic surfaces with their defects and various options of surface finishes for increased protection. The practical part of the thesis is focused on the design of appropriate technologies for specific requirements of the surface finish for the CASTOR container, creating test samples and their evaluation.
APA, Harvard, Vancouver, ISO, and other styles
10

Mendala, Jacek. "Pękanie wyrobów stalowych podczas cynkowania zanurzeniowego." Praca habilitacyjna, Wydawnictwo Politechniki Śląskiej, 2018. https://delibra.bg.polsl.pl/dlibra/docmetadata?showContent=true&id=73190.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Korozní ochrana"

1

OKTRA '99 XI konferencja: Problemy projektowania oraz optymalizacja rozwiązań materiałowych i technologii wykonywania obiektów w aspekcie trwałości i ochrony przed korozją : posadzki przemysłowe : problematyka jakości betonów i zabezpieczeń konstrukcji betonowych w oczyszczalniach ścieków oraz na składowiskach odpadów przemysłowych i rolniczych, Polanica Zdrój, 6-9 września 1999 r. Wydawn. Politechniki Wrocławskiej, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!