Relevant bibliographies by topics / Ladle refractories

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers

Academic literature on the topic 'Ladle refractories'

Author: Grafiati
Published: 4 June 2021
Last updated: 12 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Ladle refractories.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Ladle refractories"

1

Akselrod, L. M., and V. Garten. "An alternative lining of steel ladles: technical and economic aspects." Ferrous Metallurgy. Bulletin of Scientific , Technical and Economic Information, no. 12 (December 19, 2018): 72–80. http://dx.doi.org/10.32339/0135-5910-2018-12-72-80.

Full text
Abstract:
Quality of steel ladles lining to a big extent determine the economic efficiency of steel-making operation. Direct costs on the refractory lining of them can reach 30–50 % of the costs of lining of a steel-making complex. Experience of utilization of refractory materials of different composition considered with the purpose of efficiency increase of refractory materials application in the steel ladles lining under conditions of steel ladle treatment. Considerable abilities shown to make the lining of steel ladle walls and bottom by both carbon-containing and carbon-free refractory materials tak
APA, Harvard, Vancouver, ISO, and other styles
2

Antonov, G. I., A. S. Kulik, O. S. Klad'ko, et al. "Magnesia refractories for ladles with ladle treatment of steel (Discussion)." Refractories 31, no. 7-8 (1990): 429–32. http://dx.doi.org/10.1007/bf01281556.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Verrelle, D., P. Boulanger, and S. Peruzzi. "Optimization of steel ladle refractories with a view to increasing ladle capacity." Revue de Métallurgie 100, no. 10 (2003): 961–75. http://dx.doi.org/10.1051/metal:2003115.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Shcherbenko, G. N., G. I. Antonov, V. Yu Prokudin, et al. "Periclase-chromite refractories for steel-teeming ladles with ladle treatment of the steel." Refractories 29, no. 9-10 (1988): 525–29. http://dx.doi.org/10.1007/bf01287780.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Eron’ko, S. P., E. A. Ponamareva, and E. S. Tsykhmistro. "Development of vibration system for decreasing of intensity of steel ladle outlet channel tightening." Ferrous Metallurgy. Bulletin of Scientific , Technical and Economic Information 77, no. 2 (2021): 165–74. http://dx.doi.org/10.32339/0135-5910-2021-2-165-174.

Full text
Abstract:
The problem of tightening of outlet channel of steel ladle still remains relevant at present. A review of scientific and technical studies, aimed at elaboration of methods to keep the channel flow section constant presented. An analysis of deposition forming mechanisms on walls of outlet channel of steel ladle was done. To prevent their formation it was proposed to apply a vibration impact on the ladle shutter. Using simulation studies and specially elaborated methodology, the degree of influence and frequency of amplitude oscillations, acting along the ladle channel, on increasing speed of la
APA, Harvard, Vancouver, ISO, and other styles
6

Protopopov, E. V., M. V. Temlyantsev, E. M. Zapol’skaya, K. E. Maksakova, and V. A. Degtyar’. "High-temperature decarburization of alumina-periclase-carbon ladle refractories." Steel in Translation 44, no. 12 (2014): 879–82. http://dx.doi.org/10.3103/s0967091214120158.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Uzberg, L. V., G. V. Efimova, E. P. Smirnov, V. V. Pichugin, and V. V. Trofimov. "Refractories for delivery of argon into a treatment ladle." Refractories 32, no. 9-10 (1991): 493–96. http://dx.doi.org/10.1007/bf01287536.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Zhang, De Hui, Ming Gang Shen, Qing Hua Qi, and Jin Wei Kuang. "Study on Amplitude of the Surface of Liquid Steel in Bottom-Blowing Ladle with Immersed Tube." Advanced Materials Research 734-737 (August 2013): 1511–15. http://dx.doi.org/10.4028/www.scientific.net/amr.734-737.1511.

Full text
Abstract:
In the process of bottom argon blowing large argon flow rate can cause vigorous fluctuations on the surface of the molten steel and splash and reoxidize the molten steel, making the slag rolled into the steel slag, also causing the erosion of the ladle lining refractories. A 1:7 ratio ladle water model system of 150 ton ladle was established from the similarity theory in the lab. Study and analyze the effects of the inserting depth and diameter of immersed tube and bottom blowing flow rate on the fluctuation of the surface of liquid steel. Results show that the fluctuations on the surface of s
APA, Harvard, Vancouver, ISO, and other styles
9

Liu, Jun, and Hai Xia Feng. "Study of Corrosion Mechanism of Al2O3-MgO Refractories and its Effect on Cleanness of Molten Steel." Advanced Materials Research 1004-1005 (August 2014): 193–97. http://dx.doi.org/10.4028/www.scientific.net/amr.1004-1005.193.

Full text
Abstract:
High purity AL2O3-MgO carbon-free refractories for ladle lining were investigated, this paper compared with the properties of bricks with different bond system and different production process, and study the wear mechanism, the TOC and hydrogen content change; analyzing the microstructure of residual bricks and the impact of refractories on quality of molten steel;Conclusions:The two kinds of bricks have different wear mechanism, the bricks bonded by a-bond was damaged mainly by penetration and erosion while the bricks bonded by resin was damaged by structure spalling and they have different e
APA, Harvard, Vancouver, ISO, and other styles
10

Protopopov, E. V., M. V. Temlyantsev, E. M. Zapol’skaya, K. E. Maksakova, and V. A. Degtyar’. "RESEARCH ON HIGH-TEMPERATURE DECARBURIZATIONOF ALUM- PERICLASE-CARBON LADLE REFRACTORIES." Izvestiya Visshikh Uchebnykh Zavedenii. Chernaya Metallurgiya = Izvestiya. Ferrous Metallurgy 57, no. 12 (2015): 24. http://dx.doi.org/10.17073/0368-0797-2014-12-24-28.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Ladle refractories"

1

Borges, Ronaldo Adriano Alvarenga. "Análise multivariada dos principais fatores que afetam o desgaste (vida) do revestimento refratário das panelas de transporte de aço na Aciaria da Usina de Cubatão-Usiminas." Universidade de São Paulo, 2016. http://www.teses.usp.br/teses/disponiveis/3/3133/tde-22092016-095657/.

Full text
Abstract:
O aumento da demanda por aços cada vez mais exigentes, em termos de composição química e limpidez interna, faz com que as condições de refino nas aciarias sejam cada vez mais severas. Ao mesmo tempo, o aumento dos tempos de tratamento do aço, aliado às outras variáveis operacionais como quantidades e tipos de adições químicas, etc. fazem com que haja um aumento no tempo de contato entre o revestimento refratário das panelas de transporte de aço e escórias com conseqüente redução do desempenho (vida) de tais revestimentos refratários. Apesar dos esforços no intuito de redução de custos com redu
APA, Harvard, Vancouver, ISO, and other styles
2

Wang, Huijun. "A Study on the Reaction between MgO Based Refractories and Slag-Towards the Development of Carbon-free Lining Material." Doctoral thesis, KTH, Mikro-modellering, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-214420.

Full text
Abstract:
In present thesis, the fundamental studies on the reaction between MgO based refractories and slag were undertaken for the development of a carbon-free bonding MgO lining material. Alumina was selected as a potential binder material. Due to MgO-Al2O3 chemical reaction, the developed refractory was bonded by MgO·Al2O3 spinel phase. To begin with, an investigation of the dissolution process of dense MgO and MgO·Al2O3 spinel in liquid slag was carried out. To obtain reliable information for dissolution study, a new experimental method was therefore developed. In this method, a cylinder was rotati
APA, Harvard, Vancouver, ISO, and other styles
3

Saito, Eduardo. "Caracterização de concretos refratários bombeáveis para aplicação em canais de corrida e carros torpedo e determinação dos mecanismos de desgaste." Universidade de São Paulo, 2009. http://www.teses.usp.br/teses/disponiveis/97/97134/tde-26092012-171135/.

Full text
Abstract:
Para atender os altos níveis de produção exigidos dos Altos Fornos, a disponibilidade dos Canais de Corrida e dos Carros Torpedo torna-se um fator estratégico. Dentre as propostas de manutenção e reparo disponíveis pela indústria de refratários, a utilização de concretos refratários bombeáveis desponta como um recurso que possibilita, sinergicamente, realizar o reparo de forma localizada e em curtos tempos de parada. Utilizando esse tipo de material, existem, basicamente, dois tipos de aplicação: a realizada por \"Gunning\" e por \"Shotcrete\", cuja principal distinção para o usuário ocorre em
APA, Harvard, Vancouver, ISO, and other styles
4

Sousa, Bruna Berti de. "Estudo dos mecanismos de degradação de placa Al2O3-ZrO2-C de válvula gaveta em panela de aciaria." reponame:Biblioteca Digital de Teses e Dissertações da UFRGS, 2017. http://hdl.handle.net/10183/178368.

Full text
Abstract:
O trabalho disserta sobre a investigação dos mecanismos de degradação da placa refratária utilizada no sistema de válvula gaveta, o qual controla o fluxo de aço líquido da panela da aciaria para o distribuidor. As placas estudadas eram do tipo Al2O3-ZrO2-C. Na investigação foram caracterizadas e analisadas placas novas e usadas. Também foi feito teste de corrosão estático para avaliação da interação química das placas com a escória proveniente do processo de refino secundário. Além disso, foi feito experimento em laboratório para avaliar o desgaste das placas devido a presença de resquícios de
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Ladle refractories"

1

Parker, Philip M. The 2007-2012 World Outlook for Extra-High Alumina Brick and Shapes Containing 87.5 Percent or More Alumina and Extra-High Alumina Pouring Pit Refractories, ... Runners, Tuyeres, and Ladle Gate Parts. ICON Group International, Inc., 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Ladle refractories"

1

Biswas, Subir, and Debasish Sarkar. "Refractory in Ladle Flow Control and Purging System." In Introduction to Refractories for Iron- and Steelmaking. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-43807-4_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Klewski, Marcin, Obszyńska Lucyna, Sułkowski Michał, and ArcelorMittal Refractories. "Alumina-Magnesia-Carbon Bricks for Steel Ladle." In Proceedings of the Unified International Technical Conference on Refractories (UNITECR 2013). John Wiley & Sons, Inc., 2014. http://dx.doi.org/10.1002/9781118837009.ch123.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Drózd-Ryś, Magdalena, Harald Harmuth, and Roman Rössler. "Simulation of the Steel Ladle Preheating Process." In Proceedings of the Unified International Technical Conference on Refractories (UNITECR 2013). John Wiley & Sons, Inc., 2014. http://dx.doi.org/10.1002/9781118837009.ch143.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Justus, Sérgio Murilo, Agnaldo Bortolotti, Erika Fulanetti, et al. "Development of Alternative Solutions for Iron Ladle Refractory Lining." In Proceedings of the Unified International Technical Conference on Refractories (UNITECR 2013). John Wiley & Sons, Inc., 2014. http://dx.doi.org/10.1002/9781118837009.ch120.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Ohmaru, Zenta, Keiichiro Akamine, Katsumi Morikawa, and Jyouki Yoshitomi. "Improvement of the Durability on SG Plate for Steel Ladle." In Proceedings of the Unified International Technical Conference on Refractories (UNITECR 2013). John Wiley & Sons, Inc., 2014. http://dx.doi.org/10.1002/9781118837009.ch106.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Kim, Rak-Hee, Seung-Jun Lee, Sung-Ryong Jung, and Seok-Keun Lee. "Comparison of Properties among Spinel-Containing Castables for Steel Ladle." In Proceedings of the Unified International Technical Conference on Refractories (UNITECR 2013). John Wiley & Sons, Inc., 2014. http://dx.doi.org/10.1002/9781118837009.ch134.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Hui, Zhang, Yu Tongshu, Yang Wengang, and Chen Lu. "Study on Ladle Purging Plug with Gradient Composite Structure and Material." In Proceedings of the Unified International Technical Conference on Refractories (UNITECR 2013). John Wiley & Sons, Inc., 2014. http://dx.doi.org/10.1002/9781118837009.ch116.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Gu, H. Z., A. Huang, M. J. Zhang, et al. "Effect of Microporous Aggregate on Lightweight Alumina-Magnesia Castable for Ladle." In Proceedings of the Unified International Technical Conference on Refractories (UNITECR 2013). John Wiley & Sons, Inc., 2014. http://dx.doi.org/10.1002/9781118837009.ch119.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Iwamoto, Kentaro, Hidetoshi Kamio, Katsumi Morikawa, and Jyouki Yoshitomi. "Improvement of the Thermal Shock Resistance on Lower Nozzle for Tundish and Ladle." In Proceedings of the Unified International Technical Conference on Refractories (UNITECR 2013). John Wiley & Sons, Inc., 2014. http://dx.doi.org/10.1002/9781118837009.ch138.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Huang, Ao, Gu Huazhi, and Zou Yang. "Towards Efficient Modeling on Slag Corrosion of Lightweight Corundum Spinel Castable for Ladle." In Proceedings of the Unified International Technical Conference on Refractories (UNITECR 2013). John Wiley & Sons, Inc., 2014. http://dx.doi.org/10.1002/9781118837009.ch147.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Ladle refractories"

1

Tassot, Patrick, Andres Pavony, Thomas Schemmel, and Pedro Paredes Sobarzo. "EVOLUTION OF THE STEEL LADLE REFRACTORIES LINING IN LAST DECADE." In 47º Seminário de Aciaria - Internacional. Editora Blucher, 2017. http://dx.doi.org/10.5151/1982-9345-27600.

Full text
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography