Log in

Relevant bibliographies by topics / Laser cutting diode / Journal articles

To see the other types of publications on this topic, follow the link: Laser cutting diode.

Journal articles on the topic 'Laser cutting diode'

Author: Grafiati

Published: 7 June 2025

Last updated: 2 August 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Laser cutting diode.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Khalaf, Tamer, Muthuramalingam Thangaraj, Khaja Moiduddin, et al. "Performance Evaluation of Input Power of Diode Laser on Machined Leather Specimen in Laser Beam Cutting Process." Materials 16, no. 6 (2023): 2416. http://dx.doi.org/10.3390/ma16062416.

Full text

Abstract:

Numerous industries, including footwear, handicrafts, and the automobile industry, utilize leather materials. The main goal of this study was to investigate the effect of input power of the diode laser in laser cutting on vegetable chrome tanned buffalo leather to enhance the cutting process. In the present investigation, carbonization, kerf width, and material removal rate (MRR) were taken as performance measures. The diode-based laser beam machining was designed and fabricated with 2.5 W, 5.5 W, and 20 W diode laser to cut vegetable chrome tanned leather. The high-intensity 20 W diode laser

APA, Harvard, Vancouver, ISO, and other styles

2

Rodrigues, G. Costa, M. Cuypers, E. Fallahi Sichani, K. Kellens, and J. R. Duflou. "Laser Cutting with Direct Diode Laser." Physics Procedia 41 (2013): 558–65. http://dx.doi.org/10.1016/j.phpro.2013.03.116.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Friatinia, Della Dwi, Sairul Effendi, and Almadora Anwar Sani. "PENGARUH VARIASI MEDIA PELAPIS TERHADAP PEMOTONGAN AKRILIK TRANSPARAN DENGAN PROCUT DIODE 15 WATT." Scientific Journal of Mechanical Engineering Kinematika 9, no. 2 (2024): 200–213. https://doi.org/10.20527/sjmekinematika.v9i2.404.

Full text

Abstract:

Mesin laser cutting merupakan alat yang banyak digunakan dalam industri untuk memotong berbagai jenis material. Salah satu material yang sering dimanfaatkan adalah akrilik, yang dapat dipotong menggunakan mesin laser cutting dengan jenis CO2. Namun, mesin ini memiliki kelemahan berupa harga yang cukup mahal. Sebagai alternatif, laser cutting diode menawarkan solusi yang lebih ekonomis, meskipun efektivitasnya pada akrilik, terutama yang transparan, masih perlu dibuktikan. Modul laser diode diketahui mampu memotong material seperti kertas, kayu, bambu, kulit, dan plastik. Kemudian berdasarkan h

APA, Harvard, Vancouver, ISO, and other styles

4

Duncāns, Sandris, and Lyubomir Lazov. "LASER CUTTING PROCESS OPTIMISATION IN FUNCTION OF THE SPEED AND POWER." HUMAN. ENVIRONMENT. TECHNOLOGIES. Proceedings of the Students International Scientific and Practical Conference, no. 22 (April 25, 2018): 104–11. http://dx.doi.org/10.17770/het2018.22.3628.

Full text

Abstract:

This article describes an experiment, which is basically the aim fix is possible with diode laser blue tone spectrum with his length and 5, 5W power 450nm, used for cutting plywood to 3, 48 mm in thickness. Before the experiment explored and found every possible literature (scientific articles, publications, producers of the discovery that scientists do not count as scientific articles and several books).Experiment created experimental stands on the existing compact home craftsmen to 600/2 Stepcraft CNC equipment with China produced in the diodes lasers with the power of 450nm 5, 5W module, me

APA, Harvard, Vancouver, ISO, and other styles

5

A., Ramadhan, Effendi Sairul, and Anwar Sani Almadora. "OPTIMALISASI NILAI AKURASI PEMOTONGAN AKRILIK BERWARNA MENGGUNAKAN CNC LASER CUTTING DIODA 15 WATT." MACHINERY: JURNAL TEKNOLOGI TERAPAN 6, no. 1 (2025): 38–47. https://doi.org/10.5281/zenodo.15234349.

Full text

Abstract:

<em>In this study, a 15 watt diode laser cutting was used to cut black acrylic material with a thickness of 2 mm. In cutting black acrylic, cutting parameters are required to obtain optimal cutting results, so to obtain optimal parameters, a quantitative method is used with the Larger Is Better characteristic taguchi method approach. There are 3 factors used for cutting parameters, namely laser power (%), cutting speed (mm / min) and nozzle distance (mm). The nozzle distance is a factor that has a significant effect on the results of cutting acrylic with P-Value = 0.000. The optimal cutting pa

APA, Harvard, Vancouver, ISO, and other styles

6

Costa Rodrigues, Gonçalo, and Joost R. Duflou. "Opportunities in laser cutting with direct diode laser configurations." CIRP Annals 66, no. 1 (2017): 245–48. http://dx.doi.org/10.1016/j.cirp.2017.04.136.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Lentjes, Marco, and Peter Bruns. "Metal Cutting with Multi kW Diode Laser." Laser Technik Journal 9, no. 4 (2012): 31–33. http://dx.doi.org/10.1002/latj.201290051.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

C. Rodrigues, Gonçalo, and Joost R. Duflou. "Into polarization control in laser cutting with direct diode lasers." Journal of Laser Applications 28, no. 2 (2016): 022207. http://dx.doi.org/10.2351/1.4943998.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

ZHANG Jun, 张俊, 彭航宇 PENG Hang-yu, 朱洪波 ZHU Hong-bo, 秦莉 QIN Li, 宁永强 NING Yong-qiang, and 王立军 WANG Li-jun. "Direct Diode Laser Source for Stainless Sheet Cutting." Chinese Journal of Luminescence 36, no. 10 (2015): 1188–94. http://dx.doi.org/10.3788/fgxb20153610.1188.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Huang, Chao, Ji Min Chen, and Jian Wen Yuan. "The Study of Glass Cutting Based on the Micro-Crack Control." Key Engineering Materials 562-565 (July 2013): 1408–13. http://dx.doi.org/10.4028/www.scientific.net/kem.562-565.1408.

Full text

Abstract:

A 532nm Diode-Pumped green laser was used to cut glass with the Micro-Crack control. The Micro-Crack was the micron-sized round-like crack caused by laser in the glass and the line-crack around the round-like crack. This paper researched the generation of the Micro-Crack and discussed how to control it, then researched the stress field in the glass during the cutting by finite element analysis. Propose a new method about the glass cutting which had advantages of low power, low heat effect, irregular-curve cutting and slant cutting.

APA, Harvard, Vancouver, ISO, and other styles

11

Kazachkov, E. L., O. V. Safronov, E. A. Kazachkova, E. N. Ignatieva, I. V. Safronova, and L. B. Tarasova. "Morphological substantiation of laser exposure parameters and modes for surgical treatment of intrauterine pathology." Ural Medical Journal 22, no. 2 (2023): 24–33. http://dx.doi.org/10.52420/2071-5943-2023-22-2-24-33.

Full text

Abstract:

Introduction No data on experimentally substantiated parameters and modes of diode laser radiation allowing a minimally traumatic surgical treatment of intrauterine pathology have been found in the literature.The aim of the investigation was to substantiate experimentally the optimum parameters and modes of diode laser radiation in the treatment of intrauterine pathology based on the study of morphological changes in the endometrium.Materials and methods 48 endometrial samples were exposed to 10-40 W diode laser power in a constant mode and 15 samples - in a pulsed mode with 3 different sets o

APA, Harvard, Vancouver, ISO, and other styles

12

Krikun, E. V., and S. L. Blashkova. "Diode laser in dental practice." Kazan medical journal 98, no. 6 (2017): 1023–28. http://dx.doi.org/10.17750/kmj2017-1023.

Full text

Abstract:

The review presents the possibilities and experience of using diode lasers for treatment of oral inflammatory diseases. Earlier, low-intensity laser was used in dentistry only as a physiotherapeutic device. The laser applications range has expanded significantly with the advent of new technologies. Diode laser has a high level of safety, so it can be used in periodontics and endodontics without fear of tooth tissue structure damaging. In surgical dentistry, high-intensity laser radiation is used as an alternative to cutting and rotational instruments. Features of diode laser for surgical inter

APA, Harvard, Vancouver, ISO, and other styles

13

Sunarto, Sunarto, Bambang Tjahjono, Hartono Hartono, et al. "Pengaruh Kecepatan Potong Mesin CNC Laser Cutting terhadap Akurasi Potong untuk Efisiensi Proses Blanking." Jurnal Rekayasa Mesin 18, no. 3 (2023): 453. http://dx.doi.org/10.32497/jrm.v18i3.5115.

Full text

Abstract:

Saat ini proses <em>blanking </em>dapat digantikan dengan mesin laser cutting. Namun proses laser cutting dapat memotong lebih cepat atau lambat bergantung waktu pemotongan. Jika waktu pemotongan tidak tepat, maka hasil pemotongan bisa tidak sesuai. Oleh karena itu, tujuan penelitian ini adalah mengetahui pengaruh kecepatan porong terhadap akurasi pemotongan. Dalam rangka mendukug penelitian ini, maka dibuatlah rancang bangun mesin laser cutiing yang dilengkapi dengan motor <em>stepper</em>, <em>motherboard</em>, <em>coupling</em>, dan <em>

APA, Harvard, Vancouver, ISO, and other styles

14

Peyman, Gholam A., Sergio A. Cruz, and Carlos Ruiz-Lapuente. "Contact diode laser application through a fiberoptic cutting tip." Lasers in Surgery and Medicine 11, no. 4 (1991): 347–50. http://dx.doi.org/10.1002/lsm.1900110406.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Rodrigues, G. Costa, and J. R. Duflou. "Effects of Different Polarization Strategies on Laser Cutting with Direct Diode Lasers." Physics Procedia 83 (2016): 302–9. http://dx.doi.org/10.1016/j.phpro.2016.08.031.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

Costa Rodrigues, G., J. Pencinovsky, M. Cuypers, and J. R. Duflou. "Theoretical and experimental aspects of laser cutting with a direct diode laser." Optics and Lasers in Engineering 61 (October 2014): 31–38. http://dx.doi.org/10.1016/j.optlaseng.2014.04.013.

Full text

APA, Harvard, Vancouver, ISO, and other styles

17

Jamaleswara Kumar, P., A. Siva Sai Tarun, M. Gowtham, P. Thamma Rao, and G. Yashwanth. "Design and fabrication of portable laser cutting and engraving machine." International Journal of Engineering & Technology 7, no. 1.1 (2017): 570. http://dx.doi.org/10.14419/ijet.v7i1.1.10170.

Full text

Abstract:

Now a days digital control technology is became more and more useful to run the machines like portable laser cutting and engraving machines that can cut on the different surface contingent upon the power of the laser diode. In this paper the fundamental goal is to design and fabricate the laser cutting and engraving machine which is convenient to controlled by the Arduino CNC. It is accessible and perfect utilization for small and medium scale industries. This model is small, simple to work, cost of manufacturing and to effortlessly transport from one work station to other work station.

APA, Harvard, Vancouver, ISO, and other styles

18

Khalaf, Tamer, Muthuramalingam Thangaraj, and Khaja Moiduddin. "Performance Evaluation and MOORA Based Optimization of Pulse Width Control on Leather Specimens in Diode Laser Beam Cutting Process." Processes 11, no. 10 (2023): 2901. http://dx.doi.org/10.3390/pr11102901.

Full text

Abstract:

Due to the variety of benefits over traditional cutting techniques, the usage of laser cutting technology has risen substantially in recent years. The attributes of laser technology for leather cutting include adaptability, mass production, capability of cutting complicated patterns, ease of producing tailored components, and reduction in leather waste. In the present study, vegetable chrome-tanned buffalo leather specimens were cut using a 20 W laser diode with conventional and pulse width control in a photodiode-assisted laser cutting process. Emission rate, kerf width, carbonization, and ma

APA, Harvard, Vancouver, ISO, and other styles

19

Campos Paiva, Aline, João Luiz Vitorino Araujo, Renan Lovato, Márcio Krambek, and José Esteves Veiga. "SURG-43. APPLICATIONS AND RESTRICTION OF 980NM DIODE LASER FOR BRAIN TUMOR MICROSURGERY - A PIONEER CASE SERIES AND A CRITICAL REVIEW." Neuro-Oncology 22, Supplement_2 (2020): ii212. http://dx.doi.org/10.1093/neuonc/noaa215.889.

Full text

Abstract:

Abstract BACKGROUND Quality of life is essential for oncological patients. There are several tools that help surgery become more precise with less morbidity. Diode laser can cut and coagulate through thermal effect being helpful during surgery. It is a precise and useful technology that improves outcomes in neurooncology. OBJECTIVES To describe a pioneer case series of oncological use of diode laser and main applications of several types of laser in neurooncology. METHODS Detailed description of a pioneer case series of oncological patients that undergone to neurosurgical laser assisted proced

APA, Harvard, Vancouver, ISO, and other styles

20

Walid K. Hamoudi, Abdul-Majeed E. Ibrahim, and Akram A. Khalaf. "Assisting gas effect on cutting process of Formica and Emery paper using low power (1.6 Watt) laser diode." Tikrit Journal of Pure Science 22, no. 7 (2023): 137–42. http://dx.doi.org/10.25130/tjps.v22i7.843.

Full text

Abstract:

1.6 W diode laser operating at 808nm was used to cut Formica and Emery paper. The laser light was concentratedon the samples’ surfaces by using a positive lens. Comparison was made between the results of cutting quality obtained when using active and non-active assisting gasses. The results obtained revealedthe possibility of obtaining optimum cuts when selecting carefully the cutting parameters and environment.0.36 mm Emery paper was the best example for showing the effect of processing gas on cutting quality. The penetration depths for this material when employing ordinary air, O2 and CO2 we

APA, Harvard, Vancouver, ISO, and other styles

21

Kim, Dong-Hyeon, and Choon-Man Lee. "Experimental Investigation on Machinability of Titanium Alloy by Laser-Assisted End Milling." Metals 11, no. 10 (2021): 1552. http://dx.doi.org/10.3390/met11101552.

Full text

Abstract:

The Machining of titanium alloys is challenging because of their high strength, low thermal conductivity, high chemical reactivity, and high stresses at the cutting tool edges. Laser-assisted machining is an effective way to improve the machinability of titanium alloys. This paper presents an experimental investigation of the machinability of cutting force and surface roughness in laser-assisted end milling of titanium alloy Ti-6Al-4V. The absorptivity of Ti-6Al-4V was determined by conducting preheating experiments using a high-power diode laser with a wavelength of 940–980 nm. A thermal anal

APA, Harvard, Vancouver, ISO, and other styles

22

Subagyo, Ibnu Rivansyah, and Putri Taqwa Prasetyaningrum. "Optimizing Arduino-Based Laser Cut Machine Settings for Home Industry." International Journal of Artificial Intelligence and Science 1, no. 1 (2024): 1–13. https://doi.org/10.63158/ijais.v1.i1.3.

Full text

Abstract:

The rapid development of laser technology has significantly impacted various industrial sectors, particularly through the use of CNC laser cutting machines. These machines offer distinct advantages and limitations, making them suitable for processing a wide range of materials. This study aims to identify the most effective and efficient settings for a diode-based CNC laser cutting machine, specifically for cutting plywood. An experimental approach was employed, involving the design, creation, and testing of the machine. The research focused on optimizing the focus point and operational setting

APA, Harvard, Vancouver, ISO, and other styles

23

Bilder, Amir, Adi Rachmiel, Jiriys George Ginini, et al. "A Comparative Study of Mucosal Wound Healing after Excision with a Scalpel, Diode Laser, or CO2 Laser." Plastic and Reconstructive Surgery - Global Open 11, no. 8 (2023): e5150. http://dx.doi.org/10.1097/gox.0000000000005150.

Full text

Abstract:

Background: We aimed to compare the clinical and histological secondary healing effectiveness of various types of high-level laser versus scalpel excision in mucosa frenectomy. Methods: Forty-five Sprague Dawley rats were used in this study. These rats were divided into two laser intervention groups (CO2, n = 15; diode, n = 15) and one control group with scalpel excision (n = 15). The effectiveness of therapy has been assessed based on the comparison of intraoperative, postoperative, and histological parameters on days 7, 21, and 35, and postoperative weight changes as pain indicator. Results:

APA, Harvard, Vancouver, ISO, and other styles

24

Witte, Ulrich, and Martin Traub. "Cost Efficient Diode Laser Beam Source for Sheet Metal Cutting." Laser Technik Journal 14, no. 1 (2017): 36–39. http://dx.doi.org/10.1002/latj.201700003.

Full text

APA, Harvard, Vancouver, ISO, and other styles

25

Wafapoor, Hussein, Gholam A. Peyman, and Takeshi Moritera. "Contact diode laser: High power application through fiberoptic cutting tips." International Ophthalmology 18, no. 2 (1994): 93–96. http://dx.doi.org/10.1007/bf00919246.

Full text

APA, Harvard, Vancouver, ISO, and other styles

26

Zhao, Jing Ping, Lili Wang, Sha Feng, et al. "P‐33: Research on the application direction of Mini‐LED glass ‐ based laser technology." SID Symposium Digest of Technical Papers 54, no. 1 (2023): 1437–40. http://dx.doi.org/10.1002/sdtp.16857.

Full text

Abstract:

In recent years, the range of laser applications in various fields is increasing in a visible speed. In particular, ultra‐short pulse laser, with its non‐contact, high precision, small thermal effect, high flexibility, in the field of fine processing, especially in the semiconductor electronics industry, is rapidly replacing the traditional processing methods.Mini‐LED is diode that is smaller than normal LED. Thanks to the smaller size of diodes, more leds can be combined to provide more discrete dimming areas. Mini‐LED has the characteristics of ultra‐ high brightness, ultra‐high contrast, ul

APA, Harvard, Vancouver, ISO, and other styles

27

Ma, Chao-Tsung, and Fang-Yu Zhang. "Design and Implementation of a Power Semiconductor-Based Switching Mode Laser Diode Driver." Micromachines 15, no. 1 (2023): 31. http://dx.doi.org/10.3390/mi15010031.

Full text

Abstract:

Fiber lasers are commonly used in many industrial applications, such as cutting, welding, marking, and additive manufacturing. In a fiber laser system, the driver of a pumping source using a laser diode (LD) module and its dynamic control capability directly affect the performance of the fiber laser system. The commercial design of pumping source drivers for high-power fiber lasers is mainly based on a linear-type DC power supply, which has two major drawbacks, i.e., lower efficiency and bulk. In this regard, this paper proposes for the first time a new design approach with a programmable swit

APA, Harvard, Vancouver, ISO, and other styles

28

Vasanth, S., and T. Muthuramalingam. "Development of Laser Beam Machining using Power Diode Laser for leather cutting application." Journal of Physics: Conference Series 1969, no. 1 (2021): 012024. http://dx.doi.org/10.1088/1742-6596/1969/1/012024.

Full text

APA, Harvard, Vancouver, ISO, and other styles

29

Rodrigues, Gonçalo C., Cédric Decroos, and Joost R. Duflou. "Considerations on Assist Gas Jet Optimization in Laser Cutting with Direct Diode Laser." Procedia Engineering 183 (2017): 37–44. http://dx.doi.org/10.1016/j.proeng.2017.04.008.

Full text

APA, Harvard, Vancouver, ISO, and other styles

30

Adijāns, Imants, Ieva Kažmere, and Lyubomir Lazov. "OPTIMIZATION OF CO2, FIBER AND DIODE LASER PARAMETERS FOR MARKING AND CUTTING THE CORK." HUMAN. ENVIRONMENT. TECHNOLOGIES. Proceedings of the Students International Scientific and Practical Conference, no. 22 (April 25, 2018): 83–93. http://dx.doi.org/10.17770/het2018.22.3631.

Full text

Abstract:

Nowadays, lasers are trying to use as many different industries and processes as possible due to their characteristics. One of the main uses of lasers is the cutting and marking of materials. The most common laser processed materials is wood and metal. Cork is one of the safest and easiest materials to process with laser but compared to wood and metal it is more difficult to predict the end result due to this material non-homogeneity. This study is explored natural cork processing and set optimal parameters to get the best results for cutting and marking with lasers. The essence of the researc

APA, Harvard, Vancouver, ISO, and other styles

31

Kamar Affendi, Nur Hafizah, Rohana Ahmad, Farhad Vahidi, Mohd Zulkifli Hassan, and Siti Nadia Rahimi. "The Integration of a Dual-Wavelength Super Pulsed Diode Laser for Consistent Tissue Ablation in the Esthetic Zone: A Case Series." Case Reports in Dentistry 2020 (December 3, 2020): 1–6. http://dx.doi.org/10.1155/2020/8883156.

Full text

Abstract:

Introduction. A diode laser is one of the universally compact accepted laser systems used fundamentally for soft tissue applications. Most diode laser devices have a single wavelength of either 810 nm for superior coagulation or 980 nm for tissue ablation. In these case series, the use of dual wavelengths (810 nm and 980 nm) in combination with super pulsing has provided a cleaner cut (no charring) with faster healing that eases the placement of the final restoration in the esthetic zone. Case Description. The present case series describe four cases in the esthetic zone that achieved hemostasi

APA, Harvard, Vancouver, ISO, and other styles

32

Durna, Antonin, Jiri Fries, Leopold Hrabovsky, Ales Sliva, and Jozef Zarnovsky. "Research and Development of Laser Engraving and Material Cutting Machine from 3D Printer." Management Systems in Production Engineering 28, no. 1 (2020): 47–52. http://dx.doi.org/10.2478/mspe-2020-0008.

Full text

Abstract:

AbstractThis article deals with the adjustment of a 3D printer for laser engraving and material cutting. The print head can be fitted with a solid laser diode module, which achieves a compact size while retaining its useful power. Two paths lead to the use of such a concept. It is possible to equip the existing print head with a module, which also brings a number of disadvantages such as, for example, the reduction of the printing space or the need for a suitable mounting design. A more elegant solution is to consider this in the design of a 3D printer and design a system to exchange the print

APA, Harvard, Vancouver, ISO, and other styles

33

Sobri, Mohd Sharizal, Sharizal Ahmad Sobri, Mohd Natashah Norizan, et al. "The Influence of Laser Cutting Parameters on the Heat-Affected Zone in Fast-Growing Malaysian Wood Species." Journal of Manufacturing and Materials Processing 9, no. 2 (2025): 54. https://doi.org/10.3390/jmmp9020054.

Full text

Abstract:

Wood is a naturally occurring renewable resource widely used in various industries, including in construction, packaging, furniture, and paneling. In Malaysia, 80% of furniture products are made from wood, making it a crucial material in this sector. Laser cutting is an advanced machining technique that enhances precision and minimizes material waste, yet its thermal effects, particularly the heat-affected zone (HAZ), remain a challenge. This study investigates how laser cutting parameters—including the laser power, traverse speed, and focus position—affect HAZ formation in two fast-growing Ma

APA, Harvard, Vancouver, ISO, and other styles

34

Swaminathan, Vasanth, Muthuramalingam Thangaraj, Edwin George Joseph, Suhaib Sulfikar Khadar, Joel Philip Saji, and Panagiotis Karmiris-Obratański. "Analysis of Carbon Formation on Machined Leather Specimen Using FTIR Technique in Laser Diode Assisted Cutting Process." Materials 16, no. 1 (2022): 148. http://dx.doi.org/10.3390/ma16010148.

Full text

Abstract:

The leather materials are used in a multitude of sectors, including footwear, apparel, handicrafts, and the automotive industry. Due to the radiant heat generated by a laser beam, the laser cutting of leather results in a carbonized cut edge. There is currently no technology available for measuring the carbonization along the contour edges of leather. The purpose of this experimental investigation was to determine the impact of power diode-based laser cutting on the carbonization of machined buffalo leather with the help of a digital microscope to improve the machining process. The ATR-FTIR sp

APA, Harvard, Vancouver, ISO, and other styles

35

Jang, Sung Ho, Yuki Shimizu, Takemi Asai, So Ito, and Wei Gao. "Edge Contour Measurement of Single Point Diamond Cutting Tools by an Optical Probe." Key Engineering Materials 523-524 (November 2012): 925–31. http://dx.doi.org/10.4028/www.scientific.net/kem.523-524.925.

Full text

Abstract:

This paper presents an optical probe employed for edge contour measurement of single point diamond cutting tools. The laser beam from a laser diode (LD) is focused by an objective lens to form a small light spot with a radius of approximately 20 μm, and is then received by a photodiode (PD) after passed through the focal point of the objective lens. The cutting edge of the tool, which is placed on a line with the LD and the PD, is inserted into the laser beam section. At an each X-position, the output of the PD is recorded while the light spot is moved along the Z-direction, scanning across th

APA, Harvard, Vancouver, ISO, and other styles

36

Chen, Yong Hua, and Jia Nan Lu. "Sub-Surface Cutting for Rapid Prototyping." Advanced Materials Research 479-481 (February 2012): 561–64. http://dx.doi.org/10.4028/www.scientific.net/amr.479-481.561.

Full text

Abstract:

Subsurface engraving is the process of engraving an image inside a solid object, usually made of a transparent glass/crystal material. A diode-pumped solid-state (DPSS) laser with high beam quality and pulse power is normally used for subsurface engraving. The laser beam can be focused at any 3D point within a 3D envelope. At the focal point, due to high laser intensity, a small fracture or bubble is generated. The fractures can be as small as tens of microns. Currently, the image from subsurface engraving can only be seen, but not felt or touched. This has limited the applications of subsurfa

APA, Harvard, Vancouver, ISO, and other styles

37

Kouno, Akimasa, Toshiya Ono, Kaoru Imanishi, et al. "Microscopic Study on The Cutting Tissue with Hight Output Diode Laser and Erb: YAG Laser." JOURNAL OF JAPAN SOCIETY FOR LASER SURGERY AND MEDICINE 14, Supplement (1993): 513–16. http://dx.doi.org/10.2530/jslsm1980.14.supplement_513.

Full text

APA, Harvard, Vancouver, ISO, and other styles

38

Nisar, Salman, M. A. Sheikh, Lin Li, and Shakeel Safdar. "Effect of thermal stresses on chip-free diode laser cutting of glass." Optics & Laser Technology 41, no. 3 (2009): 318–27. http://dx.doi.org/10.1016/j.optlastec.2008.05.025.

Full text

APA, Harvard, Vancouver, ISO, and other styles

39

Dong, Liang, Kangqi Fan, Yuhang Feng, et al. "Preparation Technology of Stretchable Electrode Based on Laser Cutting." Machines 10, no. 10 (2022): 854. http://dx.doi.org/10.3390/machines10100854.

Full text

Abstract:

Wearable electronics have showed their profound impact in military, sports, medical and other fields, but their large-scale applications are still limited due to high manufacturing costs. As an advanced micro-fabrication process, laser processing technology has the advantages of high speed, high flexibility, strong controllability, environmental protection and non-contact in preparing micro-nano structures of wearable electronics. In this paper, a 355 nm ultraviolet laser was used to pattern the copper foil pasted on the flexible substrate, and the interconnection electrodes and wires were con

APA, Harvard, Vancouver, ISO, and other styles

40

Piontkevych, Oleh, Sergiy Suhorukov, Olha Serdiuk та Viacheslav Domoslavskiy. "Аbout a laser technological complex at mechanical engineering enterprises". Journal of Mechanical Engineering and Transport 16, № 2 (2023): 96–100. http://dx.doi.org/10.31649/2413-4503-2022-16-2-96-100.

Full text

Abstract:

The geography of manufacturers of laser devices available for the Ukrainian market is analyzed. The field of application of laser systems at mechanical engineering enterprises is quite wide: heat treatment, welding, cutting, marking, piercing, surfacing and surface alloying. One of the most promising, accurate and productive laser systems at a mechanical engineering enterprise is a laser technological complex. The modern configurations of laser technological complexes, which are used at mechanical engineering enterprises, are considered. A review of sources for generating a beam using a diode

APA, Harvard, Vancouver, ISO, and other styles

41

Bucuresteanu, Anca, Adrian Motomancea, Dan Prodan, and Alina Ovanisof. "Engraving and Cutting of Plastic Material Parts Using Low-Power Lasers." Materiale Plastice 57, no. 4 (2021): 125–33. http://dx.doi.org/10.37358/mp.20.4.5412.

Full text

Abstract:

This paper presents some of the authors� theoretical and experimental research related to the use of low-power lasers (diode laser) for the engraving, photoengraving and cutting of the parts made of plastics. There shall be presented the research carried out using a small machine, covering a net area of 150x150mm2. Small-sized companies or the persons having such pursuits can afford this type of machines. The authors also put forward several solutions to improve the performance of such machines by introducing at least one new axis of the �Z� or �A� type.

APA, Harvard, Vancouver, ISO, and other styles

42

Kukiełka, Leon, Radosław Patyk, Łukasz Bohdal, Wojciech Napadłek, Rafał Gryglicki, and Piotr Kasprzak. "Investigations of Polypropylene Foil Cutting Process Using Fiber Nb: Yag and Diode Nd:YVO4 Lasers." Acta Mechanica et Automatica 13, no. 2 (2019): 107–12. http://dx.doi.org/10.2478/ama-2019-0015.

Full text

Abstract:

Abstract Lasers are widely used in a variety of manufacturing processes including: depaneling, drilling, cutting, repair, trimming, micromachining. Polypropylene foils are intensively investigated as materials with great number of potential applications. Laser cutting is a major operation used in forming these materials and preparing the final workpieces. At the moment, the main challenge when cutting polypropylene is to obtain high quality products characterized by optimum sheared edge condition, minimum surface damage, freedom from burrs, slivers, edge wave, distortion, residual stresses and

APA, Harvard, Vancouver, ISO, and other styles

43

Götz, Georg, Johannes Fink, Christoph Richter, and Gunther Reinhart. "Increasing the Format-Flexibility of Packaging Machines: Experimental Study on Laser Beam Sealing and Cutting." Applied Mechanics and Materials 856 (November 2016): 201–8. http://dx.doi.org/10.4028/www.scientific.net/amm.856.201.

Full text

Abstract:

The improvements of the format-flexibility as well as the resource and energy efficiency are important for the users and manufacturers of packaging machines. There is a positive interconnection of resource and energy efficiency with format-flexibility because e.g. the reduction of stand-by phases. To reach these goals, it is necessary to reduce the downtime and to increase the overall equipment effectiveness (OEE). The application of laser beam based processing technologies is very common in many different branches, e.g. automotive. One big advantage of the laser beam as a working tool is the

APA, Harvard, Vancouver, ISO, and other styles

44

Lyubomirskii, G. B. "Effectiveness of removal of retention cysts with localization on the lips using dental diode laser." Medical alphabet, no. 28 (January 9, 2025): 26–29. https://doi.org/10.33667/2078-5631-2024-28-26-29.

Full text

Abstract:

The article discusses the etiology, clinical picture, diagnosis and methods of treatment of retention cysts of the minor salivary glands using cutting instruments and a diode laser. Analysis of statistical data shows that retention cysts of the lower lip are the most common form among salivary gland cysts. In the process of surgical treatment of retention cysts using classical cutting instruments, a number of difficulties arise associated with the thin capsule covering the cyst, by breaking through and pouring out the contents, as a result of which complete removal of the cyst is impossible an

APA, Harvard, Vancouver, ISO, and other styles

45

Singh, Risham, Gurpreet Singh, and Peteris Grabusts. "LASER AS A VISUALIZATION DEVICE." HUMAN. ENVIRONMENT. TECHNOLOGIES. Proceedings of the Students International Scientific and Practical Conference, no. 22 (April 25, 2018): 156–60. http://dx.doi.org/10.17770/het2018.22.3618.

Full text

Abstract:

As known to the prior characteristics of the laser, the new advanced technologies are based on the lasers. It can be used in different ways like scanning, displaying, engraving, cutting, drilling, marking, and many more. In this article, a discussion is made about the use of lasers as a device of visualization in climatic conditions like snow, fog and heavy rain. The existing technology “LiDAR” is one of the systems that will be discussed. LiDAR is a Light Detection and Ranging device used for driving the autonomous vehicles and are also installed on aircrafts in order to scan a vast area like

APA, Harvard, Vancouver, ISO, and other styles

46

Rodrigues, G. Costa, H. Vanhove, and J. R. Duflou. "Direct Diode Lasers for Industrial Laser Cutting: A Performance Comparison with Conventional Fiber and CO2 Technologies." Physics Procedia 56 (2014): 901–8. http://dx.doi.org/10.1016/j.phpro.2014.08.109.

Full text

APA, Harvard, Vancouver, ISO, and other styles

47

Ráczi, Viktor Gergely, and Balázs Mikó. "Laser Engraving on a CNC Milling Machine." Acta Materialia Transylvanica 7, no. 2 (2024): 100–108. https://doi.org/10.33924/amt-2024-02-08.

Full text

Abstract:

This article details how a commercially available diode laser (VoidMicro LD4070HF Pro) can be integrated into a conventional 3-axis CNC milling machine (HAAS Mini Mill Edu). Thanks to this development, the CNC milling machine is now able to perform a new machining process. The laser module has a major impact on the development of the secondary time, in addition to the rapid execution of engraving operations, i.e. by reducing the production lead time. During the production of a part, the marking of the product, such as QR code and barcode, is also carried out on a single machine tool, thus redu

APA, Harvard, Vancouver, ISO, and other styles

48

Arai, Yoshikazu, T. Asai, Sayeda Ferdous, and Wei Gao. "3D Profile Measurement of Nanometer Cutting Edges of Single-Point Diamond Tools for Ultra-Precision Machining." Advanced Materials Research 69-70 (May 2009): 138–42. http://dx.doi.org/10.4028/www.scientific.net/amr.69-70.138.

Full text

Abstract:

This paper describes an atomic force microscope (AFM) based instrument for 3D edge profile measurement of single-point diamond cutting tools. The instrument is composed of an AFM unit and an optical sensor for alignment of the AFM probe tip (silicon cantilever) with the diamond cutting tool edge. In the optical sensor, a laser beam from a laser diode along the Y-axis is focused to generate a small beam spot with a micrometer-order diameter at the beam waist, and then received by a photo-detector (photodiode). The tool edge top and the AFM probe tip are brought to the center of the beam waist i

APA, Harvard, Vancouver, ISO, and other styles

49

Rolek, Agnieszka, and Piotr Pławecki. "Advancements and applications of laser technology in modern dentistry." Wiadomości Lekarskie 77, no. 9 (2024): 1789–92. http://dx.doi.org/10.36740/wlek202409121.

Full text

Abstract:

The use of lasers in dentistry has revolutionized dental procedures, providing significant advantages over traditional techniques. Lasers offer enhanced precision, reduced bleeding, faster healing times, and improved patient comfort. This review explores CO2 lasers, diode lasers, Er, and Er, Cr lasers, and Photobiomodulation and Low-Level Laser Therapy (LLLT). CO2 Lasers: Introduced in the 1970s, CO2 lasers are effective for soft tissue surgeries such as gingivectomy and frenectomy due to their high water absorption, which allows for precise cutting with minimal damage. They also enhance ename

APA, Harvard, Vancouver, ISO, and other styles

50

Huang, Zhihua, Lingling Xiong, Hui Liu, et al. "Double-cutting beam shaping technique for high-power diode laser area light source." Optical Engineering 52, no. 10 (2013): 106108. http://dx.doi.org/10.1117/1.oe.52.10.106108.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!