Log in

Relevant bibliographies by topics / Laser Engraver System

Contents

Journal articles
Dissertations / Theses
Book chapters
Conference papers

Academic literature on the topic 'Laser Engraver System'

Author: Grafiati

Published: 20 February 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Laser Engraver System.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Laser Engraver System"

1

Muchlis, Andre, Wrastawa Ridwan, and Iskandar Zulkarnain Nasibu. "Rancang Bangun Mesin CNC (Computer Numerical Control) Laser dengan Metode Design for Assembly." Jambura Journal of Electrical and Electronics Engineering 3, no. 1 (2021): 23–27. http://dx.doi.org/10.37905/jjeee.v3i1.9228.

Full text

Abstract:

CNC Laser (Computer Numerical Control) adalah alat yang memiliki fungsi untuk mengukir/mencetak berbagai tulisan dan kaliqrafi secara otomatis berdasarkan media yang digunakan seperti Acrilic, Fiber, Almunium, dan kayu. Perancangan CNC laser menggunakan metode Design For Assembly Boothroyd (DFA), G-Code, dan Closed Loop System (Loop Tertutup). Kelebihan metode DFA yaitu mengestimasikan pengurangan waktu perakitan. Metode G-Code lebih ke menyatukan gerakan yang akan di lakukan mesin, seperti bergeser ke titik A, titik B. Kemudian pada metode Closed Loop System (Loop Tertutup) bekerja mengirim s

APA, Harvard, Vancouver, ISO, and other styles

2

J, Anil Kumar, Wilson Dsouza, and Rajat Kumar. "Design of CNC Machine Based Laser Engraver with Arduino UNO." International Journal for Research in Applied Science and Engineering Technology 10, no. 8 (2022): 569–73. http://dx.doi.org/10.22214/ijraset.2022.46249.

Full text

Abstract:

Abstract: Now a day’s technology is increased in rapid growth the usage and implementation of CNC system in industries and colleges but at greater cost. According to our idea on fabrication of compact and cheap cost CNC Engraver is introduced to reduce complexity, cost and manpower. This paper discusse the design and implementation of two dimensional CNC routerwhich can engrave 2D & Gray scaled images or pictures with help of high watt burning laser module on surface which can be a paper, wood, leather, plastic, foam. This paper proposes the technique used to develop a Computer Numeric Con

APA, Harvard, Vancouver, ISO, and other styles

3

Attar, Hani, Amer Tahseen Abu-Jassar, Ayman Amer, Vyacheslav Lyashenko, Vladyslav Yevsieiev, and Mohammad R. Khosravi. "Control System Development and Implementation of a CNC Laser Engraver for Environmental Use with Remote Imaging." Computational Intelligence and Neuroscience 2022 (September 10, 2022): 1–16. http://dx.doi.org/10.1155/2022/9140156.

Full text

Abstract:

This article is aimed at studying the features of the control systems development for a small-sized Computer Numerical Control (CNC) portative laser engraver. The CNC is implemented in mobile maintenance and repair platforms for remote sensing of the environment where the wild environment may not allow us to access the animals and places. The proposed work in this paper is based on recent research, which shows that applying the automated CNC speeds up the processes of repair, modernizes the equipment size, and significantly reduces the economic costs; accordingly, the authors developed a block

APA, Harvard, Vancouver, ISO, and other styles

4

Darwis, Mochammad. "Penambahan Fitur Tampilan LCD dan Micro SD Card Reader pada mesin Laser Engraver and Cutter di Laboratorium Pengemudian Listrik." Jurnal Pengelolaan Laboratorium Pendidikan 2, no. 1 (2020): 8–18. http://dx.doi.org/10.14710/jplp.2.1.8-18.

Full text

Abstract:

Laser engraver and cutter machine that have been made in previous research, can only be controlled by a computer. The addition of LCD display and Card Reader will make it work alone without using a computer (offline). Card reader is used to read gcode files from 2-dimensional design that have been made on a computer. LCD display is used to display a menu or a list of existing settings, the percentage of loading data from a gcode file and displays the 2-dimensional design of the gcode file. To move the menu on the LCD display an encoder switch is used. This additional feature was created using

APA, Harvard, Vancouver, ISO, and other styles

5

Cardoso, Rafael M., Robson O. dos Santos, Rodrigo A. A. Munoz, Carlos D. Garcia, and Lucas Blanes. "A Multi-Pump Magnetohydrodynamics Lab-On-A-Chip Device for Automated Flow Control and Analyte Delivery." Sensors 20, no. 17 (2020): 4909. http://dx.doi.org/10.3390/s20174909.

Full text

Abstract:

This article shows the development of a computer-controlled lab-on-a-chip device with three magnetohydrodynamic (MHD) pumps and a pneumatic valve. The chip was made of a stack of layers of polymethylmethacrylate (PMMA), cut using a laser engraver and thermally bonded. The MHD pumps were built using permanent magnets (neodymium) and platinum electrodes, all of them controlled by an Arduino board and a set of relays. The implemented pumps were able to drive solutions in the open channels with a flow rate that increased proportionally with the channel width and applied voltage. To address the cha

APA, Harvard, Vancouver, ISO, and other styles

6

Diciuc, Vlad, Ciprian Melian, and Mircea Lobonţiu. "Aspects Regarding the Surface Quality of the Laser Engraved Glass." Applied Mechanics and Materials 657 (October 2014): 276–80. http://dx.doi.org/10.4028/www.scientific.net/amm.657.276.

Full text

Abstract:

The use of laser engraving equipment for marking on certain products the expiry date, the bar code as well as customizing them, represents an efficient and non-polluting method. This method is very challenging from the technological point of view and with a lot of process variables that demand research. The current paper tackles the quality of the laser engraved glass in CO2 environment, as a function of the following parameters: the lasers power and the lasers pulse length. Based on the experimental results a quality system is being proposed which relies on the visual examination of the crate

APA, Harvard, Vancouver, ISO, and other styles

7

Lungu, Antonela, Maria Cristina Timar, Emanuela Carmen Beldean, Sergiu Valeriu Georgescu, and Camelia Coşereanu. "Adding Value to Maple (Acer pseudoplatanus) Wood Furniture Surfaces by Different Methods of Transposing Motifs from Textile Heritage." Coatings 12, no. 10 (2022): 1393. http://dx.doi.org/10.3390/coatings12101393.

Full text

Abstract:

The present paper is part of an ongoing research project carried out to find methods to transpose traditional motifs from Romanian textile heritage to furniture ornamentation, as an additional method of preserving the motifs besides conventional conservation. Modern technology, such as Computer Numerical Control (CNC) routing or laser engraving can revive furniture ornamentation, eliminating manual labor and long execution time. Three methods were applied to transpose a bicolored motif from a traditional Romanian blouse from Transylvania onto the surface of maple wood furniture. The first meth

APA, Harvard, Vancouver, ISO, and other styles

8

Surdo, Salvatore, Alessandro Zunino, Alberto Diaspro, and Martí Duocastella. "Acoustically-shaped laser: a machining tool for Industry 4.0." ACTA IMEKO 9, no. 4 (2020): 60. http://dx.doi.org/10.21014/acta_imeko.v9i4.740.

Full text

Abstract:

The high versatility of laser direct-write (LDW) systems offers remarkable opportunities for Industry 4.0. However, the inherent serial nature of LDW systems can seriously constrain manufacturing throughput and, consequently, the industrial scalability of this technology. Here we present a method to parallelise LDWs by using acoustically shaped laser light. We use an acousto-optofluidic (AOF) cavity to generate acoustic waves in a liquid, causing periodic modulations of its refractive index. Such an acoustically controlled optical medium diffracts the incident laser beam into multiple beamlets

APA, Harvard, Vancouver, ISO, and other styles

9

Klavins, Dainis, Lyubomir Lazov, Antons Pacejs, Ritvars Revalds, and Edgars Zaicevs. "RESEARCH OF LASER MARKING AND ENGRAVING ON BRASS ALLOY 260." ENVIRONMENT. TECHNOLOGIES. RESOURCES. Proceedings of the International Scientific and Practical Conference 3 (June 20, 2019): 119. http://dx.doi.org/10.17770/etr2019vol3.4167.

Full text

Abstract:

Brass Alloy 260 is widely used in mechanical engineering (odometer contacts, radiator cores), electrical engineering (electrical connectors, screw shells), plumbing (bathroom fixtures), consumers (watch parts, buttons, lamps) etc. The paper presents an analysis of the laser marking and engraving process. The ability Rofin powerline f20 laser system to engrave on Brass Alloy 260 is described. Recommendations are given on choosing the right parameters for laser marking and engraving of Brass Alloy 260 products.

APA, Harvard, Vancouver, ISO, and other styles

10

Busayarat, Chawee, Prittiporn Lopkerd, and Varodom Suksawaddi. "Real-Time 3D Presentation System for Heterogeneous Architectural Knowledge, Case Study: Wat Sri-Chum, Sukhothai." Journal of Architectural/Planning Research and Studies (JARS) 11, no. 2 (2014): 17–36. http://dx.doi.org/10.56261/jars.v11i2.30377.

Full text

Abstract:

Sri Chum temple in Sukhothai is an important archeological site of Thailand and one of the symbols of Sukhothai historical park. The tunnel is founded insides of the Mandapa (the temple’s central building) has significant historical and cultural values in many aspects but inaccessible for general public due to fragility of iconography and inscriptions engraved on the tunnel’s wall and ceiling. In this project, the current state of Sri Chum temple was digitized by 3D laser scanner. These collected data are used as referential information to create an enriched architectural 3D model. This model

APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Laser Engraver System"

1

Yap, YC. "Lab-on-a-chip platforms for understanding neuronal cellular interactions." Thesis, 2015. https://eprints.utas.edu.au/23216/1/Yap_whole_thesis.pdf.

Full text

Abstract:

Neurons are highly polarized cells that connect and communicate with each other via electrical impulses and chemical synapses, usually between dendrites and axons. The brain alone consists of approximately 100 billion neurons that are present at birth and do not divide, and thus cannot be replaced. Damage or loss of neurons has been linked to many diseases of the central nervous system (CNS) including Alzheimer’s Disease (AD), Parkinson Disease (PD), Amyotrophic Lateral Sclerosis (ALS) and Traumatic Brain Injury (TBI). In 2005, the World Health Organization (WHO) reported that neurological dis

APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Laser Engraver System"

1

Badea, Milian, Sorin-Aurel Moraru, and Vlad Ștefan Petre. "System Using Profinet Communication for Improving a Laser Engraver." In Proceedings of Seventh International Congress on Information and Communication Technology. Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-1610-6_18.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Laser Engraver System"

1

Nikolaev, Evgeny. "Laser Engraver Control System based on Reinforcement Adversarial Learning." In 2019 International Russian Automation Conference. IEEE, 2019. http://dx.doi.org/10.1109/rusautocon.2019.8867762.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Fritzsche, Nikolaus, and Thorsten Pretsch. "Miniaturization of QR Code Carriers Based on Shape Memory Polymer." In ASME 2012 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/smasis2012-8036.

Full text

Abstract:

Here we present a suitable tag prototype with phase-segregated poly(ester urethane) (PEU) as base material for effectively switching a quick response (QR) code in its surface from non-readable to readable. In comparison with recently introduced tags (different geometry) we minimized the thickness from plaque (2 mm) to foil size (0.5 mm) and reduced the lateral QR code length from 15 to 5 mm. Subsequent to surface-dyeing by means of guest diffusion, the QR code was laser-engraved. The implementation of thermo-mechanical functionalization via tensile deformation and cooling resulted in the forma

APA, Harvard, Vancouver, ISO, and other styles

3

Khandaker, Morshed, Onur Can Kalay, Fatih Karpat, et al. "The Effect of Micro Grooving on Goat Total Knee Replacement: A Finite Element Study." In ASME 2020 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/imece2020-24136.

Full text

Abstract:

Abstract A method to improve the mechanical fixation of a total knee replacement (TKR) implant is clinically important and is the purpose of this study. More than one million joint replacement procedures are performed in people each year in the United States, and experts predict the number to increase six-fold by the year 2030. Whether cemented or uncemented, joint prostheses may destabilize over time and necessitate revision. Approximately 40,000 hip arthroplasty surgeries have to be revised each year and the rate is expected to increase by approximately 140% (and by 600% for total knee repla

APA, Harvard, Vancouver, ISO, and other styles

4

Luciani, Se´bastian, David Brutin, Ouamar Rahli, Christophe Le Niliot, and Loune`s Tadrist. "Flow Boiling in Minichannels Under Normal, Hyper and Microgravity: Local Heat Transfer Analysis Using Inverse Methods." In ASME 2007 5th International Conference on Nanochannels, Microchannels, and Minichannels. ASMEDC, 2007. http://dx.doi.org/10.1115/icnmm2007-30153.

Full text

Abstract:

The objective presented in this paper is here to provide basic knowledge on the systems of biphasic cooling in mini and microchannels during hyper and microgravity. The experimental activities are performed in the frame of the MAP Boiling project founded by ESA. The main aspect of this paper is to present the use of inverse methods to estimate local flow boiling heat transfers coefficient in minichannels. To observe the influence of gravity level on the fluid flow and to take data measurements, an experimental setup is designed with two identical channels; one for the visualization and the oth

APA, Harvard, Vancouver, ISO, and other styles

5

Li, Zhuo, Gui-Hua Tang, Ya-Ling He, and Wen-Quan Tao. "Numerical Investigation of EDL Effects on the Flow Characters of Polar Fluids in Rectangular Microchannels." In ASME 4th International Conference on Nanochannels, Microchannels, and Minichannels. ASMEDC, 2006. http://dx.doi.org/10.1115/icnmm2006-96073.

Full text

Abstract:

Recently, a large number of experiments have been conducted to examine the applicability of Navier-Stokes equations to predict the friction factor for the laminar flow of polar fluids in microchannels. However, significant discrepancies still exist between various results. In order to investigate the effect of electric double layer on the pressure-driven flow of polar fluid in smooth rectangular microchannels and to reveal whether continuum model can still be applied, numerical investigations are conducted in this paper. The simulated microchannels are made of silicon engraved substrate with P

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!