Relevant bibliographies by topics / Laser micro

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Laser micro'

Author: Grafiati
Published: 4 June 2021
Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Laser micro.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Laser micro"

1

Wilson, J. I. B. "Laser Micro Analysis." Journal of Modern Optics 37, no. 7 (July 1990): 1278. http://dx.doi.org/10.1080/09500349014551371.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Gillner, Arnold. "Laser Micro Processing." Laser Technik Journal 5, no. 1 (January 2008): 27–30. http://dx.doi.org/10.1002/latj.200790202.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Gillner, Arnold. "Laser Micro Manufacturing." Laser Technik Journal 6, no. 1 (January 2009): 16–19. http://dx.doi.org/10.1002/latj.200990001.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Baoquan Yao, Baoquan Yao, He Li He Li, Shuang Bai Shuang Bai, Zheng Cui Zheng Cui, Xiaolei Li Xiaolei Li, Xiaoming Duan Xiaoming Duan, Yingjie Shen Yingjie Shen, and and Tongyu Dai and Tongyu Dai. "Performance of a monolithic Tm:YLF micro laser." Chinese Optics Letters 14, no. 6 (2016): 061401–61404. http://dx.doi.org/10.3788/col201614.061401.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Xu, Jingjing, Ming Zeng, Xin Xu, Junhui Liu, Xinyu Huo, Danhong Han, Zhenhai Wang, and Lan Tian. "A Micron-Sized Laser Photothermal Effect Evaluation System and Method." Sensors 21, no. 15 (July 29, 2021): 5133. http://dx.doi.org/10.3390/s21155133.

Full text
Abstract:
The photothermal effects of lasers have played an important role in both medical laser applications and the development of cochlear implants with optical stimulation. However, there are few methods to evaluate the thermal effect of micron-sized laser spots interacting with other tissues. Here, we present a multi-wavelength micro-scale laser thermal effect measuring system that has high temporal, spatial and temperature resolutions, and can quantitatively realize evaluations in real time. In this system, with accurate 3D positioning and flexible pulsed laser parameter adjustments, groups of temperature changes are systematically measured when the micron-sized laser spots from six kinds of wavelengths individually irradiate the Pd/Cr thermocouple junction area, and reference data of laser spot thermal effects are obtained. This work develops a stable, reliable and universal tool for quantitatively exploring the thermal effect of micron-sized lasers, and provides basic reference data for research on light-stimulated neuron excitement in the future.
APA, Harvard, Vancouver, ISO, and other styles
6

Wang, Bang Fu, Xue Li Zhu, Ou Xie, and Zhen Yin. "Based on Microscale Laser Shock Processing of Metal Material Characteristics Analysis and Prospect." Advanced Materials Research 450-451 (January 2012): 273–76. http://dx.doi.org/10.4028/www.scientific.net/amr.450-451.273.

Full text
Abstract:
It is introduced that laser shock peening is suitable for machining metal micro components. The micro scale effect and elastic-plastic theory of micro scale laser shock processing were analyzed and discussed. The research status, mechanism, key technology and influence factors of microscale lager shock peening were summarized and the problems in microscale lager shock peening were analyzed, which provides guidance for further research.
APA, Harvard, Vancouver, ISO, and other styles
7

Jang, Mu-Yeon, Chan-Jung Kim, Jeong-Woo Park, Seung-Yub Baek, and Tae-Wan Kim. "Fabrication of Superhydrophobic Surface with Curved Grooves Using High Power Diode Laser." Journal of Nanoscience and Nanotechnology 21, no. 9 (September 1, 2021): 4968–73. http://dx.doi.org/10.1166/jnn.2021.19265.

Full text
Abstract:
Most studies on hydrophobic surfaces processed by lasers rely on the use of pico- or femtosecond lasers. However, in industrial application, the fabrication methods using pico- or femtosecond lasers have the disadvantages of high cost and low efficiency In this study, we tried to fabricate hydrophobic surfaces using a high-power general-purpose diode laser. We have fabricated various micro/nano hierarchical structures for aluminum (Al5052) surface using laser groove processing technology. The surface of laser ablated micro structure is decorated with nano roughness, resulting in micro/nano hierarchical structure. Specimen with curved grooves are fabricated, and the correlation of wettability characteristics with spaces, widths, and curvature radii of grooves are presented. It was found that the higher contact angle was formed with a decrease of the curvature radius. We have also fabricated specimens with various micro-wavy surface pattern. The water droplets on the micro-wavy pattern kept the spherical shape with a high contact angle of 165 degrees or more.
APA, Harvard, Vancouver, ISO, and other styles
8

Sirleto, Luigi. "Micro and Nano Raman Lasers." Micromachines 12, no. 1 (December 25, 2020): 15. http://dx.doi.org/10.3390/mi12010015.

Full text
Abstract:
Raman lasers (RLs) are a class of optically pumped laser, offering coherent lights at any desired wavelength by a proper choice of the pump wavelength, when both wavelengths are within the transparency region of the gain material and an adequately high nonlinearity and/or optical intensity are provided [...]
APA, Harvard, Vancouver, ISO, and other styles
9

Kim, Joo-Han, and Chul-Ku Lee. "Laser Micro Bonding Technology." Journal of the Korean Welding and Joining Society 25, no. 2 (April 30, 2007): 1–2. http://dx.doi.org/10.5781/kwjs.2007.25.2.001.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

NAKAGAWA, Ryo, Keiich AOKI, Tomomasa OOKUBO, Takashi YABE, and Youichi OGATA. "Laser-Driven Micro-Airplane." Proceedings of The Computational Mechanics Conference 2002.15 (2002): 421–22. http://dx.doi.org/10.1299/jsmecmd.2002.15.421.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Laser micro"

1

Sierra, Hernández Wilfrido 1975. "Micro laser personal projector." Thesis, Massachusetts Institute of Technology, 2003. http://hdl.handle.net/1721.1/29704.

Full text
Abstract:
Thesis (S.M.)--Massachusetts Institute of Technology, School of Architecture and Planning, Program in Media Arts and Sciences, 2003.
Includes bibliographical references (p. 79-81).
The proposed research is a study of the technology and applications of personal projectors, small and inexpensive video projection devices intended for use in battery-powered hand-held or wearable products. This research will describe some ways of steering laser beams in one dimension to produce up to a one-meter wide screen. A one dimensional micro laser array will be used to avoid the effect of flickering while projecting an image. The use of a single lens to focus all lasers will save the complexity of collimating each laser independently. At the moment, the Micro Laser Personal Projector is displaying an image of 50 x 480 pixels. A DC brushless motor is used to steer the laser beams vertically. A fixed plano-convex lens focuses all 50 lasers. A piezo-electric device will be used on the future to increase the laser projector's image resolution from 50 x 480 to 200 x 480 pixels. With this image resolution the Micro Laser Personal Projector can be used in communications, entertainment, and medical applications.
by Wilfrido Sierra Hernández.
S.M.
APA, Harvard, Vancouver, ISO, and other styles
2

Wu, Songping. "Femtosecond laser micro-structuring of silicon wafer in water confinement." Diss., Rolla, Mo. : Missouri University of Science and Technology, 2008. http://scholarsmine.mst.edu/thesis/pdf/Wu_09007dcc80493fda.pdf.

Full text
Abstract:
Thesis (M.S.)--Missouri University of Science and Technology, 2008.
Vita. The entire thesis text is included in file. Title from title screen of thesis/dissertation PDF file (viewed April 3, 2008) Includes bibliographical references (p. 66-74).
APA, Harvard, Vancouver, ISO, and other styles
3

Kumar, Mukund. "Laser assisted micro milling of hard materials." Diss., Georgia Institute of Technology, 2011. http://hdl.handle.net/1853/41213.

Full text
Abstract:
This thesis presents an investigation of novel laser assisted micromachining processes that addresses the limitations of micromachining of hard-to-machine materials. Two different laser assisted approaches are used to machine hard metals and high strength ceramics. For hard metals, the basic approach involves localized thermal softening of the workpiece material by focusing a solid-state continuous wave near infra-red laser beam in front of the micro milling tool (end mills of 0.1 to 0.5 mm diameter). By suitably controlling the laser power, spot size and scan speed, it is possible to produce a sufficiently large reduction in the flow strength of the work material and consequently the cutting forces and tool deflections. A force model is developed to predict the cutting forces in Laser Assisted Micro Milling (LAMM) of hard metals. For high strength ceramics, the approach involves use of a two step process. In the first step, thermal cracks are generated in a confined volume by the steep thermal gradients generated by laser irradiation of the workpiece. In the second step, the weakened region is removed by a micro grinding tool. The characterization and modeling of the process serve as bases for users of the two approaches to select optimal process parameters.
APA, Harvard, Vancouver, ISO, and other styles
4

Mendez, Fernandez de Cordoba Enrique. "Laser micro-polishing of silica optics." Thesis, Heriot-Watt University, 2007. http://hdl.handle.net/10399/80.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Lorenz, Norbert. "Laser-based packaging of micro-devices." Thesis, Heriot-Watt University, 2011. http://hdl.handle.net/10399/2491.

Full text
Abstract:
In this PhD thesis the development of laser-based processes for packaging applications in microsystems technologies is investigated. Packaging is one of the major challenges in the fabrication of micro-electro-mechanical systems (MEMS) and other micro-devices. A range of bonding processes have become established in industry, however, in many or even most cases heating of the entire package to the bonding temperature is required to effect efficient and reliable bonding. The high process temperatures of up to 1100°C involved severely limit the application areas of these techniques for packaging of temperature sensitive materials. As an alternative production method, two localised heating processes using a laser were developed where also the heat is restricted to the joining area only by active cooling. Silicon to glass joining with a Benzocyclobutene adhesive layer was demonstrated which is a typical MEMS application. In this laser-based process the temperature in the centre of the device was kept at least 120°C lower than in the bonding area. For chip-level packaging shear forces as high as 290 N were achieved which is comparable and some cases even higher than results obtained using conventional bonding techniques. Furthermore, a considerable reduction of the bonding time from typically 20 minutes down to 8 s was achieved. A further development of this process to wafer-level packaging was demonstrated. For a simplified pattern of 5 samples the same quality of the seal could be achieved as for chip-level packaging. Packaging of a more densely packed pattern of 9 was also investigated. Successful sealing of all nine samples on the same wafer was demonstrated proving the feasibility of wafer-level packaging using this localised heating bonding process. The development of full hermetic glass frit packaging processes of Leadless Chip Carrier (LCC) devices in both air and vacuum is presented. In these laser-based processes the temperature in the centre of the device was kept at least 230°C below the temperature in the joining region (375°C to 440°C). Testing according to MIL-STD-883G showed that hermetic seals were achieved in high yield processes (>90%) and the packages did withstand shear forces in excess of 1 kN. Residual gas analysis has shown that a moderate vacuum of around 5 mbar was achieved inside the vacuum packaged LCC devices. A localised heating glass frit packaging process was developed without any negative effect of the thermal management on the quality of the seal.
APA, Harvard, Vancouver, ISO, and other styles
6

Powell, Rock Allen. "On-line depth measurement of micro-scale laser drilled holes." Diss., Rolla, Mo. : Missouri University of Science and Technology, 2009. http://scholarsmine.mst.edu/thesis/pdf/Powell_09007dcc806b6dfc.pdf.

Full text
Abstract:
Thesis (M.S.)--Missouri University of Science and Technology, 2009.
Vita. The entire thesis text is included in file. Title from title screen of thesis/dissertation PDF file (viewed August 14, 2009) Includes bibliographical references (p. 16-17).
APA, Harvard, Vancouver, ISO, and other styles
7

Penchev, Pavel Nedyalkov. "Reconfigurable laser micro-processing systems : development of generic system-level tools for implementing modular laser micro-manufactoring platforms." Thesis, University of Birmingham, 2016. http://etheses.bham.ac.uk//id/eprint/6709/.

Full text
Abstract:
Laser micro-machining (LMM) is an attractive manufacturing technology for the fabrication of a wide range of micro-components due to its intrinsic processing attributes. In addition, LMM can be integrated in hybrid manufacturing platforms and thus to combine LMM with other complementary processes for the cost effective fabrication of a broader range of miniaturised products. Nevertheless, the broader industrial uptake of LMM is still to come due to system-level issues in designing and implementing LMM systems. In this context, the research reported in this thesis is aimed at improving the system-level performance of reconfigurable LMM platforms and thus to create the necessary pre-requisites for achieving a much better machining accuracy, repeatability and reproducibility (ARR) in different processing configurations. First, a systematic approach for assessing and characterizing the manufacturing capabilities of LMM platforms in terms of ARR is proposed. Then, the development of generic integration tools for improving the system-level performance of reconfigurable LMM platforms in terms of manufacturing flexibility and reliability both as stand-alone machine tool configurations and also as component technologies in multi-process manufacturing solutions is presented. Next, generic software tools are proposed and validated for improving the manufacturing capabilities of LMM systems for realizing complex multi-axis laser processing strategies with a closed-loop manufacturing control. Finally, the integration of LMM in process chains is validated to extend the capabilities of well proven conventional manufacturing routes, i.e. micro milling, for the fabrication of miniaturised products, i.e. Terahertz technology devices, which have complex and challenging-to-fabricate functional features and overall designs.
APA, Harvard, Vancouver, ISO, and other styles
8

Choi, Hae Woon. "Femtosecond laser material processing for micro-/nano-scale fabrication and biomedical applications." Columbus, Ohio : Ohio State University, 2007. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=osu1184883900.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Tsopanos, Sozon. "Micro Heat Exchangers by Selective Laser Melting." Thesis, University of Liverpool, 2008. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.507633.

Full text
Abstract:
Selective Laser Melting (SLM), a layer-based Solid Freeform Fabrication (SFF) process, was used to fabricate micro cross-flow heat exchangers from 316L stainless steel, bronze (Cu 90%, Sn 10%) and Inconel 718 powder. Their mechanical and thermal properties were determined using solid blocks of SLM material prior to the fabrication of the micro cross flow heat exchangers. Initially the process parameters for the fabrication of high density (>97%) parts for the different materials were defined. The mechanical and thermal properties of SLM parts were then measured. The tensile test results exhibited yield strength values superior to the parent metals, but also showed low tensile strength and ductility as a result of the inherent residual porosity (2-4%). Results obtained from the thermal conductivity of the stainless steel material system were in good agreement with the bulk material values. The heat transfer performance of the heat exchangers with either micro channels or lattice structures as heat exchange surfaces was investigated experimentally and the results were evaluated in terms of geometry and materials. The performance of the micro heat exchangers was found to be dependent not only on the choice of material but also on the heat exchanger media geometry.
APA, Harvard, Vancouver, ISO, and other styles
10

Sun, Bangshan. "Direct laser micro-fabrication by adaptive optics." Thesis, University of Oxford, 2015. https://ora.ox.ac.uk/objects/uuid:dc127fab-1ad9-4f23-913e-9ba6438e8934.

Full text
Abstract:
Ultrafast lasers are widely used for the precise three-dimensional micro-fabrication inside transparent materials. The resolution of fabricated features depends upon the size of the focal spot, and the process efficiency depends upon the generation of short pulses at the focus. The performance is detrimentally affected by the presence of phase aberrations, which can be introduced by the optics of the system or by refraction at the surface of material. Efficiency can also be affected by other forms of aberration that are related to the ultra-short pulses, such as pulse front distortion or material dispersion. Adaptive optics has in the past been introduced into laser material processing in order to overcome the problems caused by phase aberrations. However, there are related phenomena specific to systems using ultrashort pulses that have not been extensively studied, nor have benefitted from the application of adaptive optics. This thesis concerns the development of theoretical and practical techniques to address these issues and improve the performance of laser fabrication system. New applications are enabled with this technology. Spatiotemporal modelling of laser focal intensity distribution is enabled by adopting the Fourier optics. The effects of phase aberrations and sample dispersion on the ultrafast laser focusing are studied in detail. Simulations for both conventional and temporal laser focusing methods are presented. I explore the significance of individual aberration and sample dispersion to investigate the benefit of their compensation in various practical scenarios. A new method in controlling the ultrafast laser pulses - pulse front adaptive optics - is introduced. With the combination of a deformable mirror (DM) and a spatial light modulator (SLM), quadratic shape pulse fronts with different magnitudes are created. The results are demonstrated through wave-front sensor and auto-correlator measurements. In addition, I introduce the first application of this method into the pulse front correction for a two-photon microscope. An improvement of 1.4 times in the two-photon signal beyond the phase correction is demonstrated. A series of new applications are enabled by adopting the adaptive optics into laser fabrication. In the adaptive laser fabrication in diamond, graphitic wires with any three-dimensional shapes are enabled. The resistivity of the wires is demonstrated to be reduced by more than 100 times compared to the previous reports. Non-reciprocal effects in the diamond fabrication are studied in detail. The influence of laser parameters, light polarization and pulse front tilt are investigated. I also explore several more advanced applications in the diamond fabrication. Specifically, initial results of the alternating conductor, micro-capacitor and electrode arrays for radiation detector are presented. Additionally, I discuss micro-fabrication of three dimensional funnel structures in silica glass for applications in neuroscience research.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Laser micro"

1

Darwish, Saied Muhammed Hassan, Naveed Ahmed, and Abdulrahman M. Al-Ahmari, eds. Laser Beam Micro-milling of Micro-channels in Aerospace Alloys. Singapore: Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-3602-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Hu, Anming, ed. Laser Micro-Nano-Manufacturing and 3D Microprinting. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-59313-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Sugioka, Koji, ed. Handbook of Laser Micro- and Nano-Engineering. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-319-69537-2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Veiko, Vadim P., and Vitaly I. Konov, eds. Fundamentals of Laser-Assisted Micro- and Nanotechnologies. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-05987-7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Ashman, Mike. Characterization of micro-cylinders in a laser trap. Sudbury, Ont: Laurentian University, Department of Physics and Astronomy, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Ubriaco, Michael. Activation of micro gears using a laser diode system. Sudbury, Ont: Laurentian University, School of Graduate Studies, 2002.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Li, Guoqiang. Bionic Functional Structures by Femtosecond Laser Micro/nanofabrication Technologies. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-0359-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Zhang, Yongkang. Laser Shock Processing of FCC Metals: Mechanical Properties and Micro-structural Strengthening Mechanism. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

John, Joseph. Semiconductor laser diode to single-mode fibre coupling using discrete and micro-lenses. Birmingham: University of Birmingham, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Veĭko, V. P. Fundamentals of laser assisted micro- and nanotechnologies: 25-28 June 2007, St. Petersburg, Russia. Bellingham, Wash: SPIE, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Laser micro"

1

Wu, Benxin, and Tuğrul Özel. "Micro-Laser Processing." In Micro-Manufacturing, 159–95. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2011. http://dx.doi.org/10.1002/9781118010570.ch6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Becker, M., R. Güther, R. Staske, R. Olschewsky, H. Gruhl, and H. Richter. "Laser Micro-Welding and Micro-Melting for Connection of Optoelectronic Micro-Components." In Laser in der Technik / Laser in Engineering, 457–60. Berlin, Heidelberg: Springer Berlin Heidelberg, 1994. http://dx.doi.org/10.1007/978-3-662-08251-5_98.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kaierle, Stefan, Sirko Pamin, Niklas Gerdes, and Jörg Hermsdorf. "Laser Micro Cladding." In Handbook of Laser Micro- and Nano-Engineering, 1–13. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-319-69537-2_23-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Lecler, Sylvain, Joël J. Fontaine, and Frédéric Mermet. "Laser Micronanofabrication." In Micro- and Nanophotonic Technologies, 383–402. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2017. http://dx.doi.org/10.1002/9783527699940.ch16.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Lensch, Günter, Peter Lippert, Dirk Probian, and Horst Kreitlow. "Micro Engineered Displacement Sensor." In Laser in der Technik / Laser in Engineering, 715–20. Berlin, Heidelberg: Springer Berlin Heidelberg, 1994. http://dx.doi.org/10.1007/978-3-662-08251-5_155.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Terakawa, Mitsuhiro. "Femtosecond Laser Direct Writing." In Micro/Nano Technologies, 481–98. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-0098-1_14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Bhowmik, Sumit, and Divya Zindani. "Laser-Assisted Micromachining." In Hybrid Micro-Machining Processes, 13–23. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-13039-8_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Réglat, M., I. Verrier, M. Ramos, J. P. Goure, P. Sass, G. Clauss, A. Kévorkian, and F. Rehouma. "Micro-Sensors and Fibre Optics." In Laser in der Technik / Laser in Engineering, 737–45. Berlin, Heidelberg: Springer Berlin Heidelberg, 1994. http://dx.doi.org/10.1007/978-3-662-08251-5_160.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Erler, M., S. Gronau, M. Horn, R. Ebert, S. Klötzer, and H. Exner. "Hochrate Laser Micro Cladding." In Neue Entwicklungen in der Additiven Fertigung, 159–75. Berlin, Heidelberg: Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-662-48473-9_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Roy, N., A. S. Kuar, and S. Mitra. "Laser Beam Micro-cutting." In Materials Forming, Machining and Tribology, 253–74. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-52009-4_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Laser micro"

1

Jiang, Chao, and Youqing Wang. "Study on a novel high-pressure micro-discharge configuration for micro-laser." In ICO20:Lasers and Laser Technologies, edited by Y. C. Chen, Dianyuan Fan, Chunqing Gao, and Shouhuan Zhou. SPIE, 2006. http://dx.doi.org/10.1117/12.667134.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Serrano, Justin R., and Leslie M. Phinney. "Micro-Raman Thermometry of Laser Heated Surfaces." In ASME 2007 InterPACK Conference collocated with the ASME/JSME 2007 Thermal Engineering Heat Transfer Summer Conference. ASMEDC, 2007. http://dx.doi.org/10.1115/ipack2007-33571.

Full text
Abstract:
Optically powered devices are typically irradiated by high intensity lasers and rely on the temperature excursion generated by the laser for operation. While numerical modeling can estimate the temperature profile of the irradiated devices, only direct measurements can determine the actual device temperatures. Available surface thermometry techniques, such as infrared imaging, scanning thermal microscopy and thermoreflectance are generally incompatible with an optical powering scheme, the micron-scale layer thicknesses of microsystem devices, or both. In this paper we discuss the use of micro-Raman thermometry to obtain the first spatially-resolved temperature measurements of various polycrystalline silicon (polysilicon) surfaces heated with an 808 nm continuous wave (CW) laser at a 60° angle of incidence. The micron-scale resolution of the micro-Raman technique permitted mapping of the surface temperature in the vicinity of the heating laser spot and throughout the device. In addition to discussing the requirements for accurate data collection, the implications of optical interference on the heated structures are also considered.
APA, Harvard, Vancouver, ISO, and other styles
3

Simon, Christoph. "Micro-macro Entanglement." In Laser Science. Washington, D.C.: OSA, 2013. http://dx.doi.org/10.1364/ls.2013.lw1g.6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Streek, André, and Horst Exner. "Laser micro melting." In ICALEO® 2015: 34th International Congress on Laser Materials Processing, Laser Microprocessing and Nanomanufacturing. Laser Institute of America, 2015. http://dx.doi.org/10.2351/1.5063237.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Choi, Hongseok, Yong Yang, and Xiaochun Li. "Laser-based micro-manufacturing of complex micro structures." In ICALEO® 2002: 21st International Congress on Laser Materials Processing and Laser Microfabrication. Laser Institute of America, 2002. http://dx.doi.org/10.2351/1.5065763.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Li, Xiangyou, Qainwu Hu, Xiaoyan Zeng, Shaofei Wang, and Zhixiang Cai. "Fabrication of micro-heaters by laser micro cladding and micro-pen direct writing." In ICALEO® 2007: 26th International Congress on Laser Materials Processing, Laser Microprocessing and Nanomanufacturing. Laser Institute of America, 2007. http://dx.doi.org/10.2351/1.5061142.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Palleschi, Vincenzo, G. Cristoforetti, M. Corsi, M. Giuffrida, M. Hidalgo, D. Iriarte, S. Legnaioli, A. Salvetti, and E. Tognoni. "Micro-LIBS and micro-Raman spectroscopic analysis." In Laser Induced Plasma Spectroscopy and Applications. Washington, D.C.: OSA, 2002. http://dx.doi.org/10.1364/libs.2002.fe2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Chen, Jimin, Jianhua Yang, and Tiechuan Zuo. "Micro Fabrication with Selective Laser Micro Sintering." In 2006 1st IEEE International Conference on Nano/Micro Engineered and Molecular Systems. IEEE, 2006. http://dx.doi.org/10.1109/nems.2006.334791.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Jian, Aoqun, Kai Zhang, Yu Wang, and Xuming Zhang. "Laser-actuated micro-valves and micro-pumps." In TRANSDUCERS 2011 - 2011 16th International Solid-State Sensors, Actuators and Microsystems Conference. IEEE, 2011. http://dx.doi.org/10.1109/transducers.2011.5969407.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Zhang, Wenwu, Junke Jiao, Liang Ruan, and Tianrun Zhang. "Experimental Study on Laser High-Speed Micro-Processing." In ASME 2014 International Manufacturing Science and Engineering Conference collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/msec2014-4065.

Full text
Abstract:
To study the characteristics of material removal with high power ultra-short pulsed lasers, a 300 W picosecond laser was used to make microgrooves in cooper and steel. The effects of laser power, laser frequency, scanning layers, and scanning velocity on the width and depth of the grooves were analyzed. The material removal rate of picosecond laser was compared with that of a 10 W nanosecond laser. The results showed that high power high frequency ultra-short pulsed lasers have good potential in high speed micromachining. Evidence showed that ps laser machining could be more efficient than nanosecond machining. There are issues to be solved to make high power ultra-short pulsed lasers the dominating process for high speed micromachining.
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Laser micro"

1

Waarts, R. Diode-Pumped Micro-Laser Arrays. Fort Belvoir, VA: Defense Technical Information Center, June 1994. http://dx.doi.org/10.21236/ada282494.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

MacCallum, Danny O'Neill, Chung-Nin Channy Wong, Gerald Albert Knorovsky, Michele D. Steyskal, Tom Lehecka, William Mark Scherzinger, and Jeremy Andrew Palmer. Laser based micro forming and assembly. US: Sandia National Laboratories, November 2006. http://dx.doi.org/10.2172/899077.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Lau, Kam Y. Research in Micro--Cavity Surface Emitting Laser Diodes. Fort Belvoir, VA: Defense Technical Information Center, March 1996. http://dx.doi.org/10.21236/ada305485.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

FUERSCHBACH, PHILLIP W., D. L. LUCK, LEE A. BERTRAM, and ROBERT A. ANDERSON. Laser Assisted Micro Wire GMAW and Droplet Welding. Office of Scientific and Technical Information (OSTI), March 2002. http://dx.doi.org/10.2172/793350.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Bons, Jeffrey, Ali Ameri, James Gregory, and Arif Hossain. Revolutionizing Turbine Cooling with Micro-Architectures Enabled by Direct Metal Laser Sintering. Office of Scientific and Technical Information (OSTI), May 2020. http://dx.doi.org/10.2172/1630131.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Propp, Adrienne. Ion Acceleration by Laser Plasma Interaction from Cryogenic Micro Jets - Oral Presentation. Office of Scientific and Technical Information (OSTI), August 2015. http://dx.doi.org/10.2172/1213177.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Moore, Karl D., and Jules S. Jaffe. Simultaneous Real Time Micro-bathymetric Data from a Laser Line Scanning System and Acoustic Backscatter. Fort Belvoir, VA: Defense Technical Information Center, September 2001. http://dx.doi.org/10.21236/ada628171.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Jaffe, Jules S., and Karl D. Moore. Simultaneous Real Time Micro-Bathymetric Data From a Laser Line Scanning System and Acoustic Backscatter. Fort Belvoir, VA: Defense Technical Information Center, September 1999. http://dx.doi.org/10.21236/ada629639.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Lawandy, N. M. Laser Drive Microfabrication in Glasses: Applications to Rapid Prototyping of Micro-Optics and Submicron Structures. Fort Belvoir, VA: Defense Technical Information Center, May 2000. http://dx.doi.org/10.21236/ada376523.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Acharekar, M. A., and J. Montgomery. 4.5 Micron Laser Source. Fort Belvoir, VA: Defense Technical Information Center, June 1992. http://dx.doi.org/10.21236/ada253367.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Laser micro' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography