Academic literature on the topic 'Laser sintering products'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Laser sintering products.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Laser sintering products"

1

Saprykin, A. A., E. V. Babakova, E. A. Ibragimov, and D. V. Dudikhin. "Prospects of Creating Products Using Selective Laser Sintering." Applied Mechanics and Materials 770 (June 2015): 608–11. http://dx.doi.org/10.4028/www.scientific.net/amm.770.608.

Full text
Abstract:
At present, the development of techniques and technology can’t do without innovations in production. This explains the desire of mankind to look for innovative ways to produce different types of products. One of these systems is the production method of selective laser sintering. It is more promising as compared to other rapid prototyping techniques, due to the relative cheapness of materials and time-consuming to produce finished products. This article discusses the method of selective laser sintering, its advantages and disadvantages.
APA, Harvard, Vancouver, ISO, and other styles
2

Serizawa, Ai, Tomoki Tanaka, and Takayoshi Nakano. "Microstructure of Co-Cr Alloy Products with Three-Dimensional Geometry Fabricated by Laser Beam Sintering." Materials Science Forum 783-786 (May 2014): 1349–53. http://dx.doi.org/10.4028/www.scientific.net/msf.783-786.1349.

Full text
Abstract:
The development of the implant material which works much like bone must be an intrinsic approach to reduce the mechanical mismatch. Bone expresses the anisotropy of the mechanical characteristics based on the microstructual adaptation attributed to the apatitec-axis orientation corresponding toin vivostress distribution. Therefore, the control of microstructure of implant material was performed by laser beam sintering technique aiming at the modification of mechanical property. The Co-Cr alloy products with three-dimensional geometry were successfully fabricated by laser beam sintering based o
APA, Harvard, Vancouver, ISO, and other styles
3

Abd Aziz, Izhar, Brian Gabbitas, and Mark Stanford. "Microstructure and Tensile Strength of Rapid Manufacturing Parts." Advanced Materials Research 903 (February 2014): 114–17. http://dx.doi.org/10.4028/www.scientific.net/amr.903.114.

Full text
Abstract:
The purpose of this work is to investigate the microstructure and tensile strength of Ti6Al4V pre-alloyed powders produced by a direct metal laser sintering technique. Traditionally, Ti6Al4V products for biomedical applications were produced through hot working or machining of wrought semi-finished products. A change in the production route for manufacturing Ti6Al4V products, from the more traditional methods to an additive manufacturing route, requires an investigation of microstructure and mechanical properties because these are strongly influenced by the production route. The microstructure
APA, Harvard, Vancouver, ISO, and other styles
4

Hudák, Radovan, Martin Šarik, Róbert Dadej, Jozef Živčák, and Daniela Harachová. "MATERIAL AND THERMAL ANALYSIS OF LASER SINTERTED PRODUCTS." Acta Mechanica et Automatica 7, no. 1 (2013): 15–19. http://dx.doi.org/10.2478/ama-2013-0003.

Full text
Abstract:
Abstract Thermal analysis of laser processes can be used to predict thermal stresses and consequently deformation in a completed part. Analysis of temperature is also the basic for feedback of laser processing parameters in manufacturing. The quality of laser sintered parts greatly depends on proper selection of the input processing parameters, material properties and support creation. In order to relatively big heat stress in the built part during sintering process, the thermal simulation and thermal analysis, which could help better understand and solve the issue of parts deformations is ver
APA, Harvard, Vancouver, ISO, and other styles
5

Gradoboev, A. V., A. A. Saprykin, and E. V. Babakova. "Effect of CO60 Gamma Radiation on Material Surface Properties for Layer-by-Layer Laser Sintering." Applied Mechanics and Materials 682 (October 2014): 236–39. http://dx.doi.org/10.4028/www.scientific.net/amm.682.236.

Full text
Abstract:
The research has been carried out to describe how gamma radiation of the Co60 radioactive isotope makes an impact on the copper powder, as well as the nature of sintering by the layer-by-layer laser synthesis. The changes of the structure and properties of the powder, which generally affects the layer-by-layer laser process of products sintering, have been detected.
APA, Harvard, Vancouver, ISO, and other styles
6

Remshev, Evgeny, Vitaly Ignatenko, Sergey Voinash, et al. "Research of Post-Treatment Effect on Structure of Alloys Manufactured Using Additive Technologies." Materials Science Forum 1049 (January 11, 2022): 69–74. http://dx.doi.org/10.4028/www.scientific.net/msf.1049.69.

Full text
Abstract:
The effect of cold isostatic pressing of EP648 alloy after selective laser sintering is researched. The effect of cold isostatic pressing on the porosity of the structure of a material manufactured by additive technologies (AT) has been established. It is proposed to consider cold isostatic pressing as a method of subsequent treatment of products ("post-treatment") made by selective laser sintering.
APA, Harvard, Vancouver, ISO, and other styles
7

Erdal, M., Serkan Dag, Y. Jande, and C. M. Tekin. "Manufacturing of Functionally Graded Porous Products by Selective Laser Sintering." Materials Science Forum 631-632 (October 2009): 253–58. http://dx.doi.org/10.4028/www.scientific.net/msf.631-632.253.

Full text
Abstract:
Selective laser sintering (SLS) is a rapid prototyping technique which is used to manufacture plastic and metal models. The porosity of the final product obtained by SLS can be controlled by changing the energy density level used during the manufacturing process. The energy density level is itself dependent upon manufacturing parameters such as laser power, hatching distance and scanning speed. Through mechanical characterization techniques, it is possible to quantitatively relate the energy density levels to particular strength values. The present study is directed towards manufacturing funct
APA, Harvard, Vancouver, ISO, and other styles
8

Liu, Y. H., Z. X. Guo, P. Shen, H. Y. Wang, and J. D. Hu. "Study on densification of laser ignited reaction sintering of Ni-Al-Cu powder." Science of Sintering 39, no. 1 (2007): 31–37. http://dx.doi.org/10.2298/sos0701031l.

Full text
Abstract:
The mechanisms of densification during laser ignited reaction sintering of Ni-Al-Cu powder materials were studied. With the addition of Cu, densification of Ni-Al-Cu specimens made of big particles was realized under laser rapid ignition and sintering without signification change of the final products. Filling of the mixture of liquid and disintegrated small grains or particles was regarded as the dominant mechanism for the final densification.
APA, Harvard, Vancouver, ISO, and other styles
9

Babakova, E. V., A. V. Gradoboev, A. A. Saprykin, E. A. Ibragimov, V. I. Yakovlev, and A. V. Sobachkin. "Comparison of Activation Technologies Powder ECP-1 for the Synthesis of Products Using SLS." Applied Mechanics and Materials 756 (April 2015): 220–24. http://dx.doi.org/10.4028/www.scientific.net/amm.756.220.

Full text
Abstract:
At present the development of methods of layer-by-layer and line-by-line synthesis of finished prototypes and functional products made of powder materials furthers introduction of these technologies into different areas of human activities from light to heavy industry and medicine. The research has been carried out to describe how gamma radiation of the Co60radioactive isotope and the mechanical activation makes an impact on the copper powder, as well as the nature of sintering by the layer-by-layer laser synthesis. The changes of the structure and properties of the powder, which generally aff
APA, Harvard, Vancouver, ISO, and other styles
10

Herczeg, Szabolcs, János Takács, Ágnes Csanády, et al. "Solid-State Transformation Produced by Laser Treatment and Mechanical Alloying of Fe-Ni-Cu(P) Powders." Materials Science Forum 589 (June 2008): 391–96. http://dx.doi.org/10.4028/www.scientific.net/msf.589.391.

Full text
Abstract:
The comparison of the phase transformations going on due to high energy ball milling (HEBM) and produced by pressure-less Direct Metal Laser Sintering (DMLS developed by EOS company) was carried out, by using an α-Fe, Ni and Cu3P powder mixture. It could be shown by X-ray diffractograms (XRD) of the two type of products, that by mechanical alloying a similar phase transformation occurs due to solid state reactions between the metal partners as in the case of laser sintering, in a given range of laser scanning speed in a laboratory laser equipment. According to the XRD evaluation the same metas
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Laser sintering products"

1

Мельник, В. Є., О. В. Соловей та К. І. Хмельницька. "Інструмент для обробки складнопрофільних поверхонь". Thesis, Видавництво СумДУ, 2010. http://essuir.sumdu.edu.ua/handle/123456789/11355.

Full text
Abstract:
Метою роботи є створення нового інструмента для механічної обробки деталей типу зрізаної кулі. Означене завдання вирішується у шліфувально-полірувальному інструменті, що містить корпус 1 та робочий абразивовмісний шар 2, який виконаний у вигляді стільникової структури з наскрізними отворами 3 циліндричної форми, діаметр яких D складає 1,0…2,0 мм і відстань між отворами a - 1,0…2,0 мм, при цьому отвори розташовані рівномірно по об’єму шару, що містить абразив. При цитуванні документа, використовуйте посилання http://essuir.sumdu.edu.ua/handle/123456789/11355
APA, Harvard, Vancouver, ISO, and other styles
2

Girardin, Emmanuelle. "Biomedical metal alloys produced by Direct Metal Laser Sintering." Doctoral thesis, Università Politecnica delle Marche, 2016. http://hdl.handle.net/11566/243150.

Full text
Abstract:
La Sinterizzazione Diretta di Metalli mediante Laser (DMLS), basata su un processo strato-per-strato, è stata usata per ottenere provini in leghe Co–Cr–Mo–W e Ti-6Al-4V per applicazioni biomediche. La risposta meccanica e la microstruttura sono state studiate sia nello stato “tal quale” che dopo trattamento termico post-produzione per i campioni in Co–Cr–Mo–W, e dopo due diversi trattamenti termici per quelli in Ti-6Al-4V. Misure di rugosità e durezza, così come test di trazione e flessione, sono state eseguite per studiare la risposta meccanica, mentre la diffrazione di raggi X, la microscopi
APA, Harvard, Vancouver, ISO, and other styles
3

Kandis, Mouhyieldin. "Observation and modeling of part growth and shape evolution of polymer parts produced by non-isothermal and laser-induced sintering of powders /." Digital version accessible at:, 1999. http://wwwlib.umi.com/cr/utexas/main.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Rouholamin, Davood. "The controllable manufacture of porous biodegradable scaffolds produced by a novel supercritical CO2 foaming rig, &, Characterisations of nylon 12 parts produced by high speed sintering and laser sintering processes with various lamp powers and laser powers." Thesis, University of Sheffield, 2013. http://etheses.whiterose.ac.uk/4085/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Athreya, Siddharth Ram. "Processing and characterization of carbon black-filled electrically conductive nylon-12 nanocomposites produced by selective laser sintering." Diss., Georgia Institute of Technology, 2010. http://hdl.handle.net/1853/39508.

Full text
Abstract:
Electrically conductive polymer composites are suitable for use in the manufacture of antistatic products and components for electronic interconnects, fuel cells and electromagnetic shielding. The most widely used processing techniques for producing electrically conductive polymer composites place an inherent constraint on the geometry and architecture of the part that can be fabricated. Hence, this thesis investigates selective laser sintering (SLS), a rapid prototyping technique, to fabricate and characterize electrically conductive nanocomposites of Nylon-12 filled with 4% by weight of carb
APA, Harvard, Vancouver, ISO, and other styles
6

Johnson, Andrew. "Establishing design characteristics for the development of stab resistant Laser Sintered body armour." Thesis, Loughborough University, 2014. https://dspace.lboro.ac.uk/2134/16743.

Full text
Abstract:
Stab resistant body armour had been used throughout history, with examples ranging from animal hide construction to the moulded Polycarbonate units typically used by United Kingdom (UK) Police Officers. Such protective articles have historically, and continue to present a number of issues which have shown to impair the operational performance of its wearer including but not exclusive to poor thermal regulation, large masses, and reduced manoeuvrability. A number of developments have been made in an attempt to minimise the effects of such issues. One potential solution yet to be fully explored
APA, Harvard, Vancouver, ISO, and other styles
7

Jönsson, David, and Mir Kevci. "Geometrical accuracy of metallic objects produced with Additive or Subtractive Manufacturing: a comparative in-vitro study." Thesis, Malmö högskola, Odontologiska fakulteten (OD), 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:mau:diva-19934.

Full text
Abstract:
Syftet: Utvärdera produktionstolerans av objekt som producerats genom additiv framställningsteknik (AF) för användning inom tandvård, samt att jämföra denna teknik med subtraktiv framställningsteknik (SF) genom reverse engineering.Material och metod: Tio exemplar av två olika geometriska objekt framställdes från fem olika AF maskiner och en SF maskin. Objekt A efterliknar ett inlay, medan objekt B återspeglar en modell av en fyrledsbro. Alla objekt delades in i olika mätled; X, Y och Z. Mätningarna utfördes med validerade och kalibrerade instrument. Linjära avstånd mättes med ett digitalt skju
APA, Harvard, Vancouver, ISO, and other styles
8

KRISHNAN, MANICKAVASAGAM. "Investigation of material and mechanical properties of Al alloy and Al based MMC parts produced by DMLS for industrial application." Doctoral thesis, Politecnico di Torino, 2014. http://hdl.handle.net/11583/2530290.

Full text
Abstract:
Additive Manufacturing (AM) is the process of joining materials layer upon layer to produce parts from CAD model. Direct Metal Laser Sintering (DMLS) is an AM process in which metallic parts can be produced. The knowledge of material and mechanical properties are important for producing lightweight and functional parts. Hence, this thesis focuses on characterizing material and mechanical properties of a lightweight alloy processed by DMLS, and using it as metal matrix for producing composites in DMLS process. AlSi10Mg was selected as lightweight alloy and it is similar to an A360 cast alloy
APA, Harvard, Vancouver, ISO, and other styles
9

Sousa, André Diogo Roberto de. "Orientation and location dependency of the mechanical properties of an AlSi10Mg part produced using direct metal laser sintering (DMLS) - a microsample approach." Master's thesis, 2017. https://repositorio-aberto.up.pt/handle/10216/108284.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Sousa, André Diogo Roberto de. "Orientation and location dependency of the mechanical properties of an AlSi10Mg part produced using direct metal laser sintering (DMLS) - a microsample approach." Dissertação, 2017. https://repositorio-aberto.up.pt/handle/10216/108284.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Laser sintering products"

1

Fontana, Filippo, Enrico Marinelli, and Mirko Meboldt. "Selection of High-Variety Components for Selective Laser Sintering: An Industrial Case Study." In Industrializing Additive Manufacturing - Proceedings of Additive Manufacturing in Products and Applications - AMPA2017. Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-66866-6_23.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Childs, T. H. C., G. R. Ryder, and M. Berzins. "Experimental and theoretical studies of selective laser sintering." In Rapid Product Development. Springer US, 1997. http://dx.doi.org/10.1007/978-1-4615-6379-2_12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kruth, J. P., L. Froyen, B. Morren, and J. Bonse. "Selective Laser Sintering of WC-Co “hard metal” parts." In Rapid Product Development. Springer US, 1997. http://dx.doi.org/10.1007/978-1-4615-6379-2_14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Aegerter, M. A. "Sintering and Patterning Using Laser Irradiation." In Sol-Gel Technologies for Glass Producers and Users. Springer US, 2004. http://dx.doi.org/10.1007/978-0-387-88953-5_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Huse, Timo, and Laura Rehberg. "The Potential of High Speed Sintering for Small Series in the Automotive Industry." In Advances in Automotive Production Technology – Towards Software-Defined Manufacturing and Resilient Supply Chains. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-27933-1_29.

Full text
Abstract:
AbstractIndividualization in the high-performance segment within the automotive industry is becoming increasingly important. Especially when small volumes are required, conventional manufacturing processes often no longer prove profitable. The use of additive processes in general and high-speed sintering (HSS) in particular offer the freedom to produce complex organic shapes in a cost-effective and resource-saving manner from batch size one onwards. The HSS process is a powder bed-based additive manufacturing process in which thermoplastics are sintered at a constant layer time using an infrar
APA, Harvard, Vancouver, ISO, and other styles
6

Zander, C., J. Düsing, G. Hohenhoff, P. Jäschke, L. Overmeyer, and S. Kaierle. "Advanced Temperature Sense and Control Methods for Selective Laser Sintering." In Innovative Product Development by Additive Manufacturing 2022. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-27261-5_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Bourell, D. L., R. S. Evans, and S. L. Barrows. "High-Temperature Infiltration of Non-Metallic Articles Produced via Selective Laser Sintering." In Materials Science Forum. Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-960-1.2861.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Ribamar, Giovani Gonçalves, Luis Paulo Mouráo dos Santos, Hana Livia Coelho, et al. "Study of Phase Transformation in Ti-6Al-4V Alloy Produced by Direct Metal Laser Sintering." In Proceedings of the 13th World Conference on Titanium. John Wiley & Sons, Inc., 2016. http://dx.doi.org/10.1002/9781119296126.ch219.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Faraj, Zainab, Smail Zaki, Mohamed Aboussaleh, and Hamid Abouchadi. "Optimization of the Roughness and Dimensional Accuracy of PA12 Parts Produced by Selective Laser Sintering." In Springer Tracts in Additive Manufacturing. Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-32927-2_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Bove, Alessandro, Flaviana Calignano, Matteo Perrone, and Luca Iuliano. "On the Development of a Compliant Mechanism for Displacement Amplification Produced by Selective Laser Sintering." In Flexible Automation and Intelligent Manufacturing: Establishing Bridges for More Sustainable Manufacturing Systems. Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-38241-3_45.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Laser sintering products"

1

Przano, Dominic. "Utilizing Selective Laser Sintering For Production Fabrication of Peculiar Support Equipment." In Vertical Flight Society 70th Annual Forum & Technology Display. The Vertical Flight Society, 2014. http://dx.doi.org/10.4050/f-0070-2014-9563.

Full text
Abstract:
Traditionally, helicopter peculiar support equipment is designed, developed, and fabricated using conventional methods, primarily with metallic materials. Specifically, component repair and overhaul tools containing unique, complex features (e.g. internal involute splines) are fabricated using conventional broaching, machining, or electrical discharge machining (EDM) techniques. These techniques combined with the low volume production and acquisition of these products, result in high cost and long lead times. As an alternative, Selective Laser Sintering (SLS), the process of using 3D CAD model
APA, Harvard, Vancouver, ISO, and other styles
2

Badrak, Robert, William Howie, Arturo Delacruz, and Sergey Kolesov. "Characterization of Direct Metal Laser Sintered Alloy 718 in the As-Fabricated and Heat Treated Condition." In CORROSION 2018. NACE International, 2018. https://doi.org/10.5006/c2018-11297.

Full text
Abstract:
Abstract Additive manufacturing (AM) processes have been shifting from primarily prototyping products to the production of fully functional end parts and components. An understanding of the material characteristics necessitates an evaluation of the mechanical and corrosion behavior in order to determine and quantify the limitations of AM processes. This paper focuses on characterizing Alloy 718 produced via the Direct Metal Laser Sintering (DMLS) process in the as-fabricated and heat treated condition. The printed Alloy 718 material was produced on a single plate comprised of rectangular, cyli
APA, Harvard, Vancouver, ISO, and other styles
3

Prieto, Claudia, Marc Singer, and David Young. "Pitting and Crevice Corrosion Resistance of a Direct Metal Laser Sintered (DMLS) 316L Stainless Steel in Artificial Seawater." In CORROSION 2021. AMPP, 2021. https://doi.org/10.5006/c2021-17006.

Full text
Abstract:
Abstract The use of 2%-Mo containing austenitic stainless steels is a common practice for marine applications, such as for the fabrication of fuel nozzles and impellers. Such geometrically complex parts can be manufactured more efficiently using additive manufacturing techniques, such as the direct metal laser sintering process (DMLS). However, research has revealed that 316-type stainless steels are not entirely exempt from undergoing localized attack. Environmental factors, such as chloride content, temperature and oxygen levels are key governing factors limiting the application of 2%-Mo con
APA, Harvard, Vancouver, ISO, and other styles
4

Prieto, C., D. Young, M. Singer, M. Clum, and T. J. Cyders. "Pitting Corrosion Resistance of a 316L Stainless Steel Manufactured by the Direct Metal Laser Sintering Process." In CORROSION 2018. NACE International, 2018. https://doi.org/10.5006/c2018-11569.

Full text
Abstract:
Abstract Direct metal laser sintering (DMLS) is an additive manufacturing process that utilizes a laser to sinter powdered metal to make geometrically complex parts. However, DMLS generally produces material with lower mechanical performance and higher anisotropy as compared to conventional manufacturing approaches of the same material. Furthermore, components made by DMLS are believed to be more vulnerable to corrosion due to the presence of residual porosity, as well as laser induced microstructural deformations. This research focuses on the evaluation of the pitting corrosion resistance of
APA, Harvard, Vancouver, ISO, and other styles
5

Fujii, Akito, and Akio Nishimoto. "CoCrFeNiTi High-Entropy Sintered Alloy with Metal Screen Direct Current Plasma Nitriding." In IFHTSE 2024. ASM International, 2024. http://dx.doi.org/10.31399/asm.cp.ifhtse2024p0097.

Full text
Abstract:
Abstract High-entropy alloys (HEA) are multinary alloys obtained by blending at least five metallic elements in compositions close to their isoatomic fractions (5–35 at%). Generally, HEAs are produced by arc melting and casting. However, the cast specimens undergo phase separation and have a non-uniform microstructure. In contrast to ingot metallurgy, powder metallurgy has several advantages such as the possibility of alloying metals with high melting points and large differences in melting points and specific gravity. Therefore, we investigated the preparation of HEAs by mechanical alloying (
APA, Harvard, Vancouver, ISO, and other styles
6

Mušič, Branka. "Overview of the Impacts of Additive Production Techniques on the Environment: Production of Continuous Fibers, Direct Laser Sintering of Metals and Selective Laser Sintering Techniques." In TBMCE, International Conference on Technologies & Business Models for Circular Economy. University of Maribor Press, 2025. https://doi.org/10.18690/um.fkkt.1.2025.10.

Full text
Abstract:
Additive manufacturing (AM) has experienced significant growth in recent years, emerging as a transformative technology with broad applications across various industries. This review explores the advantages, disadvantages, and environmental impacts of AM, an important area of consideration as this technology continues to gain popularity. By analyzing existing literature, we assess the challenges associated with AM processes, particularly in comparison to traditional manufacturing methods. AM has the greatest potential to contribute to sustainable development by the production of lightweight co
APA, Harvard, Vancouver, ISO, and other styles
7

Saprykin, A. A., E. A. Ibragimov, E. V. Babakova, and V. I. Yakovlev. "Influence of mechanical activation of copper powder on physicomechanical changes in selective laser sintering products." In ADVANCED MATERIALS WITH HIERARCHICAL STRUCTURE FOR NEW TECHNOLOGIES AND RELIABLE STRUCTURES. AIP Publishing LLC, 2015. http://dx.doi.org/10.1063/1.4932889.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Nave, Gilad, Clifton Buxbaum, and F. Patrick McCluskey. "Reliable Additive Manufacturing Using Transient Liquid Phase Sintering." In ASME 2021 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/ipack2021-73367.

Full text
Abstract:
Abstract Additive manufacturing is rapidly revolutionizing the way products are designed and built. Its advantages in terms of mobile manufacturing, mass customization, part reduction, waste reduction, and just-in-time sparing are causing it to be considered for many electronics applications. Many of these applications require high thermal and electrical conductivity and high strength in harsh environments. Such applications would benefit greatly from additive manufacturing of metals. However, the number of metal systems that can be successfully manufactured this way is small, with some of the
APA, Harvard, Vancouver, ISO, and other styles
9

Ha, Sangho, Hweeyoung Han, Daeil Kwon, et al. "Systematic Dimensional Calibration Process for 3D Printed Parts in Selective Laser Sintering (SLS)." In ASME 2015 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/detc2015-47983.

Full text
Abstract:
The selective laser sintering (SLS) processes, known for enhancing engineering properties and durability of products, are widely used in auto part development processes. The dimensional displacements of the 3D printed parts, however, hinder utilizing the technology directly to enhance their development process. In general, the SLS process causes curved shapes (convex) due to thermal deformation (thermal expansion and thermal contraction) in the powder sintering and cooling processes, which accompanies multi-phase changes of the raw materials (polymer powders). In this research, we aim to prese
APA, Harvard, Vancouver, ISO, and other styles
10

Zhao, Xinran, Patcharapit Promoppatum, and Shi-Chune Yao. "Numerical Modeling of Non-linear Thermal Stress in Direct Metal Laser Sintering Process of Titanium Alloy Products." In First Thermal and Fluids Engineering Summer Conference. Begellhouse, 2016. http://dx.doi.org/10.1615/tfesc1.iam.012685.

Full text
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!