Relevant bibliographies by topics / Laser tag

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Laser tag'

Author: Grafiati
Published: 9 September 2021
Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Laser tag.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Laser tag"

1

Choi, Charles Q. "Laser Tag." Scientific American 303, no. 5 (November 2010): 30. http://dx.doi.org/10.1038/scientificamerican1110-30a.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Ur Rehman, Shafiq, Ran Liu, Hua Zhang, Gaoli Liang, Yulu Fu, and Abdul Qayoom. "Localization of Moving Objects Based on RFID Tag Array and Laser Ranging Information." Electronics 8, no. 8 (August 10, 2019): 887. http://dx.doi.org/10.3390/electronics8080887.

Full text
Abstract:
RFID (radio-frequency identification) technology is rapidly emerging for the localization of moving objects and humans. Due to the blockage of radio signals by the human body, the localization accuracy achieved with a single tag is not satisfactory. This paper proposes a method based on an RFID tag array and laser ranging information to address the localization of live moving objects such as humans or animals. We equipped a human with a tag array and calculated the phase-based radial velocity of every tag. The laser information was, first, clustered through the DBSCAN (Density-Based Spatial Clustering of Applications with Noise) algorithm and then laser-based radial velocity was calculated. This velocity was matched with phase-based radial velocity to get best matching clusters. A particle filter was used to localize the moving human by fusing the matching results of both velocities. Experiments were conducted by using a SCITOS G5 service robot. The results verified the feasibility of our approach and proved that our approach significantly increases localization accuracy by up to 25% compared to a single tag approach.
APA, Harvard, Vancouver, ISO, and other styles
3

Nugroho, Aji Brahma, Fitriana Fitriana, and Ahmad Sugianto. "DESAIN OTOMATISASI PINTU GERBANG FAKULTAS TEKNIK UMJ MENGGUNAKAN RFID ATAU PASWORD DENGAN SENSOR LASER DIODA." Jurnal Teknik Elektro dan Komputasi (ELKOM) 1, no. 2 (December 31, 2019): 75–85. http://dx.doi.org/10.32528/elkom.v1i2.3094.

Full text
Abstract:
Pada penelitian ini, telah dibuat Desain Otomatisasi Pintu Gerbang Fakultas Teknik UMJ menggunakan RFID atau Password dengan Sensor Laser Dioda. Frekuensi radio dimanfaatkan untuk membaca informasi dari RFID tag atau transponder (Transmitter Responder) yang disingkat menjadi ID tag yang akan membuka pintu gerbang, sedangkan sensor laser dioda disini sebagai pendeteksi mobil, jika kendaraan memutuskan cahaya sensor laser dioda maka pintu gerbang akan tertutup. alat ini cocok diaplikasikan untuk daerah Fakultas Teknik yang dimana didalamnya dibutuhkkan keamanan dan kenyamanan akses masuk kewilayah tersebut sehingga suasana dapat terjalin dengan tenang dan teratur.Analisis pengujian Dari hasil pengujian RFID, Password dan LCD pada rangkaian didapatkan hasil bahwa apabila Tag RFID didekatkan pada RFID Reader, sama hal dengan password. Tag RFID dan kode password tersebut adalah sesuai yang dimasukan ke dalam program mikrokontroller ATmega8535, maka mikrokontroller ATmega8535 akan memerintahkan Driver Motor untuk menggerakan motor DC untuk bergerak searah jarum jam atau dalam aplikasinya gerbang akan membuka. Apabila kendaraan telah melewati batas gerbang dan memutus sinar laser maka secara otomatis sensor akan mendapatkan nilai hight sehingga pintu gerbang akan menutup.
APA, Harvard, Vancouver, ISO, and other styles
4

Leducq, S., A. Maruani, N. Kluger, and M. Samimi. "« Laser tag purpura » : une nouvelle cause de purpura d’effort." Annales de Dermatologie et de Vénéréologie 145, no. 12 (December 2018): S248—S249. http://dx.doi.org/10.1016/j.annder.2018.09.383.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Fulcher, A., D. Cochran, R. Rosetta, R. Zondag, and Heping Zhu. "LASER TAG: INTELLIGENT SPRAYERS CHANGE THE PEST MANAGEMENT GAME©." Acta Horticulturae, no. 1055 (October 2014): 447–51. http://dx.doi.org/10.17660/actahortic.2014.1055.95.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Leducq, Sophie, Annabel Maruani, Nicolas Kluger, and Mahtab Samimi. "“Laser tag purpura”: a new form of exercise-induced purpura." European Journal of Dermatology 30, no. 4 (August 2020): 418–20. http://dx.doi.org/10.1684/ejd.2020.3817.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Silina, Yuliya E., Claudia Fink-Straube, Heiko Hayen, and Dietrich A. Volmer. "Analysis of fatty acids and triacylglycerides by Pd nanoparticle-assisted laser desorption/ionization mass spectrometry." Analytical Methods 7, no. 9 (2015): 3701–7. http://dx.doi.org/10.1039/c5ay00705d.

Full text
Abstract:
In this study, we propose a simple and rapid technique for characterization of free fatty acids and triacylglycerides (TAG) based on palladium nanoparticular (Pd-NP) surface-assisted laser desorption/ionization (SALDI) mass spectrometry (MS).
APA, Harvard, Vancouver, ISO, and other styles
8

Pannkuk, E. L., D. F. Gilmore, B. J. Savary, and T. S. Risch. "Triacylglyceride (TAG) profiles of integumentary lipids isolated from three bat species determined by matrix-assisted laser desorption–ionization time-of-flight mass spectrometry (MALDI–TOF MS)." Canadian Journal of Zoology 90, no. 9 (September 2012): 1117–27. http://dx.doi.org/10.1139/z2012-078.

Full text
Abstract:
Lipids secreted from sebaceous glands in bat integument may play a role in determining host pathogenicity by the fungus Geomyces destructans in white-nose syndrome (WNS). To investigate this, we have determined the triacylglycerol (TAG) profiles for three bat species: eastern red bats ( Lasiurus borealis (Müller, 1776)), evening bats ( Nycticeius humeralis (Rafinesque, 1818)), and big brown bats ( Eptesicus fuscus (Beauvois, 1796)). Neutral lipids extracted from the hair and wing tissue were fractionated by preparative thin-layer chromatography (TLC) into four major lipid bands corresponding to cholesterol, free fatty acids (FFAs), TAGs, and sterol–wax esters. Densitometry showed higher proportions of TAGs in hair than from wing tissue. TAG bands were recovered and analyzed by matrix-assisted laser desorption–ionization time-of-flight mass spectrometry (MALDI–TOF MS). Mass spectra showed sodiated TAG species with variable fatty acyl (FA) moieties range from m/z 715.6–911.8. High intensity ion peaks were consistent with 16:0 and 18:1 as dominant FA moieties, and these were identified as palmitic and oleic acids, respectively, by liquid chromatography electrospray ionization mass spectrometry. We determined significant differences in TAG profiles between three bat species by MALDI–TOF MS, providing the first description of integumentary lipids in bats. In this study, we performed the first TAG profiling of bats, which suggest such profiles may be species-specific in bats.
APA, Harvard, Vancouver, ISO, and other styles
9

Cha, Jung Hoon, Yong Jung Kim, Yong Cheon Cho, Hojun Lee, and Hak Yong Lee. "A Dual-Band Low-Power-Consumption Active RFID Tag Based on a Meander FPCB Antenna for Subway Vehicle Management." Journal of Electromagnetic Engineering and Science 21, no. 1 (January 31, 2021): 71–77. http://dx.doi.org/10.26866/jees.2021.21.1.71.

Full text
Abstract:
A meander microstrip antenna was designed to operate in the UHF and microwave bands. Laser direct structuring (LDS) and the flexible printed circuit board (FPCB) method were used to fabricate the antenna, and their results were compared. A dual-band low-power-consumption active radio frequency identification (RFID) tag based on the present antenna was developed and fabricated for an automated subway vehicle maintenance system. The recognition distance of the active tag is more than 20 m at 900 MHz and more than 170 m at 2.4 GHz, while the recognition rate is >95% at 900 MHz and 100% at 2.4 GHz. The 100% recognition rate was obtained when the RFID readers were placed in a line parallel to the subway track. Therefore, we have shown that our active RFID tag can be used in a subway vehicle management system.
APA, Harvard, Vancouver, ISO, and other styles
10

Morita, Takao, Kiyoshi Ishida, Katuhiko Ookubo, Katuyuki Tanaka, and Norio Daikuzono. "A Study on Hemostatic Vascular Management using Nd: TAG Laser Bipolar Dissector." JOURNAL OF JAPAN SOCIETY FOR LASER SURGERY AND MEDICINE 13, Supplement (1992): 425–28. http://dx.doi.org/10.2530/jslsm1980.13.supplement_425.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Laser tag"

1

Alves, Hélder Nuno Vieira. "Intraferência : hacktivismo urbano digital, uma forma de preservação do património e promoção artística." Master's thesis, Faculdade de Ciências Sociais e Humanas, Universidade Nova de Lisboa, 2012. http://hdl.handle.net/10362/7769.

Full text
Abstract:
Trabalho de Projecto apresentado para cumprimento dos requisitos necessários à obtenção do grau de Mestre em Novos Média e Prácticas Web
Este trabalho de projecto pretende incentivar o uso da tecnologia e dos open standards num contexto de hacktivismo urbano, preservação do património cultural e promoção artística. A questão central teórica abordada visa um exercício de reflexão sobre de que forma as tecnologias digitais combinadas com a internet produzem mudanças no quotidiano pessoal e profissional, num quadro de evolução e criação permanente. Reimaginar a forma como o graffiti comunica e integra paisagem urbana é o principal desafio. O processo de criação e partilha recorre à aplicação de código aberto laser tag para intervir e comunicar no espaço urbano, numa relação criada entre o graffiti analógico e digital, street art experimental e os novos média. O processo de concretização consiste na criação de uma célula do Graffiti Research Lab em Portugal, para criar e trocar experiências e conhecimentos bem como contribuir para um entendimento mais abrangente desta expressão artística.
APA, Harvard, Vancouver, ISO, and other styles
2

Nguyen, Thi Phuong Nhung. "Fabrication of Nanostructured Silicon Substrates for the Development of Superomniphobic Surfaces and Surface-Assisted Laser Desorption/Ionization Mass Spectrometry Analysis of Biomolecules." Thesis, Lille 1, 2011. http://www.theses.fr/2011LIL10065/document.

Full text
Abstract:
Mes travaux de thèse concernent la fabrication de micro et de nanostructures en silicium dans le but de développer des surfaces non-mouillantes et d’outils analytiques pour des applications en biochimie et en microfluidique. Pour ce faire, nous avons utilisé d’une part la gravure chimique humide qu’est la « metal-assisted electroless etching » (approche descendante) et d’autre part la croissance de nanofils par « Chemical Vapor Deposition » via le mécanisme « Vapor-Liquid-Solid » (approche ascendante). Des surfaces structurées possédant des morphologies différentes ont été obtenues. Grâce à ces méthodes de fabrication nous avons préparé des structurations simple et double, à savoir des structurations nanométriques et micrométriques et des doubles structurations micro-nanométriques. Dans une première partie, les surfaces structurées ont permis de développer des surfaces superomniphobes, capables de repousser des liquides présentant des tensions de surface très variables. Les surfaces présentant une double structuration donnant les meilleures propriétés non-mouillantes. Dans une deuxième partie, ces surfaces nanostructurées ont été utilisées comme matrices inorganiques pour la désorption/ionisation assistée par laser permettant l’analyse en spectrométrie de masse de petites molécules sans l’utilisation de matrice organique. Nous avons étudié l’influence de la morphologie, du type de dopage et de la terminaison chimique sur l’analyse en spectrométrie de masse d’un mélange de peptide standard. Finalement, nous avons réalisé l’enrichissement d’un peptide et son analyse en spectrométrie de masse à partir d’un mélange donné, grâce à l’introduction d’un ligand spécifique
This work concerns the fabrication of micro/nanostructured silicon substrates and their application as non-wetting surfaces, and analytical tools for biomolecules’ analysis and in microfluidic devices. Two different techniques were investigated for the formation of nanostructured silicon substrates: chemical wet etching via metal-assisted electroless etching (Top-down approach) and nanowire growth by « Chemical Vapor Deposition » via Vapor-Liquid-Solid mechanism (Bottom-up approach). Different structured surface morphologies were then obtained. These were either simple structured such as: Micro or Nanoscale, or double structured such as: Micro-Nano or Nano-Nanoscale. The first part of the thesis deals with the preparation of superominiphobic surfaces capable of repelling almost any liquid. The surfaces consisting of double structured substrates gave the best non-wetting properties. Secondly, nanostructured silicon substrates were used as inorganic matrices for the detection of small molecules without using an organic matrix in laser desorption/ionization mass spectrometry. Herein, we investigated the influence of surface morphology, doping type and chemical termination on mass spectrometry analysis of a standard peptide mixture. Finally, functionalized silicon nanowires surfaces with a specific ligand were used to perform peptide enrichment and its subsequent analysis by mass spectrometry from a mixture solution
APA, Harvard, Vancouver, ISO, and other styles
3

Thiery, Gwendoline. "Imagerie par désorption laser/spectrométrie de masse de multiples marqueurs spécifiques : développement de la technique TAMSIM "Targeted Multiplex Mass Spectrometry Imaging"." Paris 6, 2008. http://www.theses.fr/2008PA066253.

Full text
Abstract:
La protéomique est devenue un domaine de recherche essentiel en biologie et en médecine. Afin, de répondre aux enjeux de cette discipline, il est nécessaire de pouvoir caractériser et localiser les protéines exprimées au niveau cellulaire. De nombreuses techniques d’analyses in situ des ces protéines considérées comme étant des marqueurs spécifiques d’une pathologie existent et sont utilisées en routine, notamment pour le suivi des cancers, dans de nombreux laboratoires d’anatomo pathologie. La plus répandue est l’immunohistochimie (IHC). Cette technique consiste à révéler spécifiquement in situ un complexe immun (antigène-anticorps). Dans l’optique d’accroître la capacité de détection multiple (multiplexage) d’une immunoréaction, nous avons développé une nouvelle technique d’imagerie in situ de multiples marqueurs spécifiques. Des traceurs chimiques photoclivables (Tag) sont fixés spécifiquement sur des anticorps. Les anticorps marqués sont complexés in situ aux protéines cibles présentent sur le tissu. Les Tag sont ensuite clivés de leurs anticorps respectifs par désorption laser. Apres une irradiation de la coupe par le laser à 355 nm une image est générée à partir des différents spectres de masse enregistrés pour chaque Tag utilisés. Contrairement au mode MALDI, l’utilisation de la matrice n’est pas nécessaire pour favoriser l’ionisation de ces composés chimiques. Ce qui simplifie grandement l’analyse par spectrométrie de masse. Cette technique appelée TAMSIM pour TArgeted multiplex Mass Spectrometry IMaging a pu être validée pour l’analyse de différents marqueurs spécifiques localisés au sein des tissus pancréatiques et sur des sections tissulaires de foie humain.
APA, Harvard, Vancouver, ISO, and other styles
4

Plucnar, Libor. "Sebelokalizace a navigace malého mobilního robotu." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2014. http://www.nusl.cz/ntk/nusl-220686.

Full text
Abstract:
The thesis is focused on design of self-location and navigation of small mobile robot inside buildings. It contents a description of collecting and processing data from laser scanner and their application for wall following algorithms. Designed algorithm was tested on real mobile robot. It describes system of visual tags and algorithms for their detection and decoding. Visual tags are used for indication of checkpoints used for navigation of mobile robot. It also describes method for route planning between this checkpoints.
APA, Harvard, Vancouver, ISO, and other styles
5

Mitri, Giulia. "Progettazione Data Layer per un sistema di Tag Management finalizzato all’analisi dei dati." Bachelor's thesis, Alma Mater Studiorum - Università di Bologna, 2018.

Find full text
Abstract:
Questa tesi è il risultato del lavoro e dello studio effettuato all’interno dell’azienda che mi ha ospitata per il tirocinio. Il Team nel quale sono stata inserita si occupa di progettare e implementare il Data Layer e i tag per la gestione del tracciamento dati, tramite i quali poi verranno svolte analisi per personalizzare sempre di più l’esperienza dell’utente all’interno del sito o dell’applicazione e per migliorarne le funzionalità. Da tempo le aziende sono alla ricerca di un modello più semplice, flessibile, scalabile e standardizzato per rendere disponibili i dati alle soluzioni di Digital Analytics. Per sopperire a questa esigenza è stato creato il Data Layer. Il Data Layer consiste in un elemento logico che ha lo scopo di esporre i dati in appositi oggetti, che di per sé non hanno logica applicativa, ma che fungono da semplici contenitori di variabili e dati, affinchè questi possano essere poi letti ed utilizzati dalle altre piattaforme, tipicamente mediante soluzioni di tagging dinamico. Le soluzioni di tagging dinamico, collocate come livello logico intermedio tra il Data Layer e le piattaforme di Digital Analytics, forniscono la capacità di leggere dati dal Data Layer, di aggregarli con le sintassi e le logiche peculiari di ogni singola soluzione e di inviarli formattati nel modo corretto alle soluzioni di Digital Analytics. Questa tesi è volta a descrivere il progetto nel quale sono stata inserita all'interno dell’azienda. L’oggetto principale di questo progetto consiste nella progettazione del Data Layer per l’implementazione di un sistema di Tag Management con lo scopo di effettuare il tracciamento dati relativo all’applicazione. Il progetto in questione tratta di un’applicazione mobile di tipo finanziario disponibile solo sulla piattaforma iOS. Nello specifico è stata presa in analisi la parte di onboarding dell’applicazione. Per onboarding si intende la parte relativa alla registrazione e all’apertura di un conto corrente online.
APA, Harvard, Vancouver, ISO, and other styles
6

Kim, Oh Hyun. "Atomic layer deposition of GaN and TaN." [Gainesville, Fla.] : University of Florida, 2009. http://purl.fcla.edu/fcla/etd/UFE0025153.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Nair, Raji Sasidharan. "Contribution au développement de tags chipless et des capteurs à codage dans le domaine temporel." Thesis, Grenoble, 2013. http://www.theses.fr/2013GRENT008/document.

Full text
Abstract:
La RFID sans puce, en raison du très faible coût des tags, a ouvert une nouvelle voie pour les systèmes d'identification. Les étiquettes RFID sans puce fonctionnant dans le domaine temporel ont l'avantage d'être compatibles avec de grandes distances de lecture, de l'ordre de quelques mètres, et de pouvoir fonctionner dans les bandes de fréquence ISM. Cependant, les tags de ce type développés jusqu'à lors n'offraient qu'une faible capacité de codage. Cette thèse propose une nouvelle méthode pour augmenter la capacité de codage des tags fonctionnant dans le domaine temporel en utilisant des C-sections, c'est-à-dire des lignes de transmission repliées de manière à avoir des zones fortement couplées, ce qui leur donne un caractère dispersif. Une autre approche basée sur une technique multi-couches a également été introduite de façon à augmenter considérablement la capacité de codage. Pour terminer, la preuve de concept d'un tag-capteur d'humidité, basé sur l'utilisation de nano fils de silicium, est également présentée
Chipless RFID tags, owing to their low cost, have opened a new way to the identification systems. Chipless RFID tags operating in the time domain have the advantage of being compatible with large reading distances of the order of a few meters, and also can operate in the ISM frequency bands. However, time domain tags developed until now offer poor coding capacity. This thesis proposes a new method to increase the coding capacity of tags operating in time domain by using C-sections, i.e. the transmission lines are folded so as to have tightly coupled zones that give them a dispersive nature. Another approach based on a multi-layer technique was also introduced, in order to increase the coding capacity considerably. Finally, the proof of concept of a humidity sensor tag based on silicon nanowires is also presented
APA, Harvard, Vancouver, ISO, and other styles
8

Baltazar-Lopez, Martin Eduardo. "Applications of TAP-NDE technique to non-contact ultrasonic inspection in tubulars." Diss., Texas A&M University, 2003. http://hdl.handle.net/1969.1/1614.

Full text
Abstract:
The possibility and feasibility of experimental detection of localized defects in tubes using laser-induced ultrasonic wave approach through Thermo Acousto Photonic Non Destructive Evaluation (TAP-NDE) and Signal processing through wavelet transform is examined in this research. Guided waves in cylindrical surfaces provide solutions for detection of different defects in the material. Several experiments were conducted to this respect. Wave propagation in both axial and circumferential directions was studied. The dispersive wave propagation of ultrasonic waves in hollow cylinders has been investigated experimentally, primarily for use in non-contact and nondestructive inspections of pipes and tubes. The laser ultrasonic waves propagated in cylindrical waveguides are particularly attractive because of their unique characteristics in the applications of nondestructive evaluation (NDE). Contrary to studies making use of only axially symmetric guided waves in hollow cylinders, here are analyzed also nonaxisymmetric waves. The analysis of data is made by using the Gabor wavelet transform. The capability of modeling the guided wave dispersion in hollow cylinders is used in developing guided wave experimental techniques for flaw detection. Good agreement was obtained when comparing the dispersion spectra between theory and experimentation. Measurement of group velocities of guided waves, which are obtained directly from the wavelet transform coefficients, can be used to determine allocation and sizing of flaws.
APA, Harvard, Vancouver, ISO, and other styles
9

Frankel, Micah Paul. "The determinants of LIFO layer liquidations: Tax minimization and agency cost factors." Diss., The University of Arizona, 1991. http://hdl.handle.net/10150/185513.

Full text
Abstract:
Prior LIFO studies have assumed that a LIFO-use firm will avoid liquidating old low-cost inventory layers due to the resulting tax penalty. However, a LIFO-use firm can actually receive a tax subsidy by liquidating inventory layers in a low marginal tax year, thus avoiding the need to liquidate in future higher tax years. This leads to the prediction that low marginal tax rate LIFO firms account for the majority of LIFO liquidations. Using several measures of a firm's marginal tax rate, and controlling for other potential determinants of LIFO liquidations, this prediction receives strong empirical support. The other potential determinants controlled for which are significantly associated with liquidations include: the probability of violating debt covenants, firm specific sales, industry specific production, investment and financing factors (PIFs) and economy wide factors.
APA, Harvard, Vancouver, ISO, and other styles
10

Tan, Jing [Verfasser], and Thomas [Akademischer Betreuer] Klopstock. "Laser capture microdissection of single muscle fibers for mitochondrial proteomic investigations / Jing Tan ; Betreuer: Thomas Klopstock." München : Universitätsbibliothek der Ludwig-Maximilians-Universität, 2019. http://d-nb.info/1205664874/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Laser tag"

1

Bock, Jason E. Lazer wars: A laser tag marketing manifesto. Indianapolis, Ind: International Laser Tag Association, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kuhne, Wilhelm. Lager 1102 Nr. 1322741: Notizen und Erinnerungen : 12 Tage Krieg, 281 Tage Gefangenschaft. Paderborn: Verlag Bonifatius-Druckerei, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Ji guang yu hong wai tan ce yuan li: Laser and Infrared Sounds Principle. Beijing: Guo fang gong ye chu ban she, 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Service, United States Internal Revenue. Penalty code explanations: (for tax years 1989 and later). 6th ed. [Washington, D.C.?]: Dept. of the Treasury, Internal Revenue Service, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Xiaojian, Hao, ed. Guang dian tan ce ji shu yu ying yong. Beijing: Guo fang gong ye chu ban she, 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Und weckte doch in deinem ewigen Hauche nicht den Tag: Prophetie im Werk Else Lasker-Schülers. Frankfurt am Main: P. Lang, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Parliament, Canada Library of. The goods and services tax: 10 years later. Ottawa: Library of Parliament, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

From warhorses to ploughshares: The later Tang reign of Emperor Mingzong. Hong Kong: Hong Kong University Press, 2014.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Committee, California Legislature Joint Legislative Budget. Proposition 13, ten years later: A report on the Joint Legislative Budget Committee's hearing of September 30, 1987. Sacramento, CA (State Capitol, Box 942849, Sacramento 94249-0001): May be purchased from Joint Publications, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Federal Tax Conference (6th 1987 Seattle, Wash.). 1986 Tax Reform Act--one year later: Sixth annual Federal Tax Conference, October 24, 1987. [Seattle, Wash.]: Washington Law School Foundation, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Laser tag"

1

Weippert, Ralf, Thomas Drescher, Stefan Glück, Carolin Böckler, and Andreas Schiffler. "Herausforderungen der mechatronischen Produktentwicklung mittels Systems Engineering meistern am Beispiel sensorisierter Lager." In Tag des Systems Engineering, 183–92. München: Carl Hanser Verlag GmbH & Co. KG, 2016. http://dx.doi.org/10.3139/9783446451414.018.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Azdasht, G., E. Zakel, and H. Reichl. "Laser Soldering of TAB Inner Lead Bonds." In Micro System Technologies 90, 413–18. Berlin, Heidelberg: Springer Berlin Heidelberg, 1990. http://dx.doi.org/10.1007/978-3-642-45678-7_58.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Schwarz, A., J. S. Rossier, F. Bianchi, F. Reymond, R. Ferrigno, and H. H. Girault. "Micro-TAS on Polymer Substrates Micromachined by Laser Photoablation." In Micro Total Analysis Systems ’98, 241–44. Dordrecht: Springer Netherlands, 1998. http://dx.doi.org/10.1007/978-94-011-5286-0_57.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Kenyon, Gary. "Physical Activity and Dementia: Tai Chi as Narrative Care." In Physical Activity and Sport in Later Life, 92–100. London: Palgrave Macmillan UK, 2015. http://dx.doi.org/10.1007/978-1-137-42932-2_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Sawyer, Daniel. "Navigation by Tab and Thread: Place-Markers and Readers’ Movement in Books." In Spaces for Reading in Later Medieval England, 99–114. New York: Palgrave Macmillan US, 2016. http://dx.doi.org/10.1057/9781137428622_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Plos, Thomas, and Martin Feldhofer. "Analyzing the Hardware Costs of Different Security-Layer Variants for a Low-Cost RFID Tag." In Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering, 426–35. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-31909-9_24.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Chen, Changjun, Min Zhang, Shichang Zahng, Qingming Chang, and Hongyan Ma. "Surface oxygen diffusion hardening of TA2 pure titanium by pulsed Nd: YAG laser under different gas atmosphere." In Proceedings of the 36th International MATADOR Conference, 523–26. London: Springer London, 2010. http://dx.doi.org/10.1007/978-1-84996-432-6_115.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Fehrs, Michael. "Boundary Layer Suction Modeling Based on the DLR TAU-Code Effusion Mass Flux Boundary Condition." In Notes on Numerical Fluid Mechanics and Multidisciplinary Design, 175–84. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-25253-3_17.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Dobrzański, Leszek A., Krzysztof Labisz, and Andrzej Klimpel. "Comparison of Mechanical Properties of the 32CrMoV12-28 Hot Work Tool Steels Alloyed with WC, VC and TaC Powder Using HPDL Laser." In Fracture and Damage Mechanics V, 1233–36. Stafa: Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-413-8.1233.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Zare, Hossein, Mohammad J. Zare, Peter Olsen, and Mojgan Azadi. "Comparing Black Ridge Transport Access Control (TAC), Brain Waves Authentication Technology and Secure Sockets Layer Visibility Appliance (SSL-VA)." In 16th International Conference on Information Technology-New Generations (ITNG 2019), 19–27. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-14070-0_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Laser tag"

1

Lum, Kassy M., Donnie Proffitt, Ann Whitney, and Johné M. Parker. "Experimental Investigation and Numerical Optimization of Key Factors Affecting the Programming Efficacy of Passive UHF RFID Tags." In ASME 2013 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/imece2013-65265.

Full text
Abstract:
Radio Frequency Identification (RFID) is a disruptive technology that uses radio waves to uniquely identify objects. As such, it has the potential to bring significant benefits to numerous government and private sector initiatives. However, significant technical challenges remain. A key area of study is in system performance: while the major hardware components in an RFID system (i.e., tags, readers and middleware) have been and continue to be studied extensively, there has been little research, comparatively, in characterizing RFID system performance. The research presented in this paper was inspired, in part, by a laser printer RFID solution; i.e., one in which the printer simultaneously prints and programs ultra-high frequency (UHF) tags embedded in print media. In this paper, we have conducted a detailed experimental investigation of the primary factors influencing the performance of RFID systems similar to the print solution. This study aims to provide a systematic experimental process for investigating key factors — e.g., the air gap between reader antenna and tag, in-plane orientation of the tag with respect to the reader antenna, and power level output of the reader — which affect the programmability of UHF RFID tags. Results provide a baseline evaluation of the functionality of RFID systems of similar designs and provide a basis for a detailed exploration of the primary factors which affect RFID UHF passive tag dynamic programming capabilities. By understanding which factors significantly affect the readability and programming of RFID tags, this research suggests optimal designs for system functionality and provides data needed in order to advance such designs. Additionally, a key obstacle for RFID implementation is tag selection. Effectively matching tags to applications requires numerous economic and technical considerations; these considerations generate different implementation constraints. This paper lays the foundation for a multi-objective optimization algorithm to help determine optimal tag selection for a given application, based upon tag performance and cost.
APA, Harvard, Vancouver, ISO, and other styles
2

Chen, Jie, and Shengming Zhou. "TAG magneto-optic ceramics and its application in high power optical isolators." In Sixteenth National Conference on Laser Technology and Optoelectronics, edited by Jianqiang Zhu, Weibiao Chen, Pu Wang, Zhenxi Zhang, and Jianrong Qiu. SPIE, 2021. http://dx.doi.org/10.1117/12.2603237.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kang, SeungYeon, Xiaohan Du, and Craig B. Arnold. "Exploring the efficiency of laser materials processing with tunable acoustic gradient (TAG) lens (Conference Presentation)." In Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXIV, edited by Gediminas Račiukaitis, Tetsuya Makimura, and Carlos Molpeceres. SPIE, 2019. http://dx.doi.org/10.1117/12.2512960.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Alam, Md Nahidul, Umma Hany, Iftekher Alam Rahat, Md Musfiqur Rahman, Md Isteak Parvez, Md Jahid Hasan, and Md Saiam. "An Autonomic LASER Tag Combat Simulation System Based on IPS Using RSSI from Wireless Devices." In 2021 International Conference on Information and Communication Technology for Sustainable Development (ICICT4SD). IEEE, 2021. http://dx.doi.org/10.1109/icict4sd50815.2021.9397050.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Du, Xiaohan, Craig B. Arnold, and SeungYeon Kang. "Simulation of laser micro-machining with tunable acoustic gradient of refractive index lens (TAG lens) as an ultrafast z-scanner (Conference Presentation)." In Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXIV, edited by Gediminas Račiukaitis, Tetsuya Makimura, and Carlos Molpeceres. SPIE, 2019. http://dx.doi.org/10.1117/12.2513333.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Ahmad, Farhan, Mona Abdolrazaghi, and David S. Nobes. "A Comparison of 2-D Molecular Tagging Velocimetry (MTV) and Micro Particle Image Velocimetry (µPIV) for Microscale Flows." In ASME 2010 International Mechanical Engineering Congress and Exposition. ASMEDC, 2010. http://dx.doi.org/10.1115/imece2010-37773.

Full text
Abstract:
A 2-D scanning molecular tagging velocimetry technique is presented. The described MTV technique utilizes a scanning laser system enabling two-dimensional flow velocity measurements. The laser scanning system allows the tagging of molecules seeded in the flow of any desired pattern. This array of small dot markers in the region of interest is visualized using an epi-fluorescent optical imaging system. The scanning system facilitates the convenient maneuvering of the laser beam allowing the tagging of either a single point or a pattern. The laser beam is focused onto a single point leading to a more efficient tagging process. A standard particle tracking velocimetry (PTV) approach is used to resolve the two components of the flow velocity. Results obtained show the capability of the designed system to tag a region in the centre of the field of view. The tagging laser will be moved to any desired location within the field of view to tag the desired region.
APA, Harvard, Vancouver, ISO, and other styles
7

Fritzsche, Nikolaus, and Thorsten Pretsch. "Miniaturization of QR Code Carriers Based on Shape Memory Polymer." In ASME 2012 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/smasis2012-8036.

Full text
Abstract:
Here we present a suitable tag prototype with phase-segregated poly(ester urethane) (PEU) as base material for effectively switching a quick response (QR) code in its surface from non-readable to readable. In comparison with recently introduced tags (different geometry) we minimized the thickness from plaque (2 mm) to foil size (0.5 mm) and reduced the lateral QR code length from 15 to 5 mm. Subsequent to surface-dyeing by means of guest diffusion, the QR code was laser-engraved. The implementation of thermo-mechanical functionalization via tensile deformation and cooling resulted in the formation of stable shapes, which exceeded the barrier of QR code readability at an elongation of 20%. Once functionalized, tags were switched on demand by heating. As such the recovery of the PEU was accomplished and the QR code could again be read out. QR code carriers based on shape memory polymer can be used in product and brand protection applications.
APA, Harvard, Vancouver, ISO, and other styles
8

Teraura, Nobuyuki, Kunio Ito, Naoki Takahashi, and Kouichi Sakurai. "The Development of Radiation-Resistant RF Tags for Use at Nuclear Power Plants." In 2013 21st International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/icone21-16605.

Full text
Abstract:
RF tags based on RFID (Radio-frequency Identification) technology have been widely used in various fields including power plant construction and maintenance for the purpose of improving the identification and traceability of the many components in the facility. To date, various types of tags have been developed, including tags that are resistant to chemicals or high-temperature environments, which are used in specialized fields. When considering widespread use of RF tags in nuclear power plants, there is a concern about the effects of radiation on the RF tags, because the data stored in the tag may receive radiation damage, resulting in corruption of data. Here, we describe a newly designed RF tag that achieves resistance to radiation damage by attaching a radiation shield layer and incorporating automatic data-correction software. This radiation-resistant RF tag has been tested under real radiation exposure fields to verify the intended radiation-resistant functions. It is expected that the use of these radiation-resistant RF tags with a data reader and database system will increase the capabilities of RF tags applied to nuclear power plants and it is also expected to lead to reductions in worker radiation exposure doses.
APA, Harvard, Vancouver, ISO, and other styles
9

Mohapatra, Nilamadhaba, Namrata Sarraf, and Swapna sarit Sahu. "Ensemble Model for Chunking." In 2nd International Conference on Blockchain and Internet of Things (BIoT 2021). AIRCC Publishing Corporation, 2021. http://dx.doi.org/10.5121/csit.2021.110811.

Full text
Abstract:
Transformer Models have taken over most of the Natural language Inference tasks. In recent times they have proved to beat several benchmarks. Chunking means splitting the sentences into tokens and then grouping them in a meaningful way. Chunking is a task that has gradually moved from POS tag-based statistical models to neural nets using Language models such as LSTM, Bidirectional LSTMs, attention models, etc. Deep neural net Models are deployed indirectly for classifying tokens as different tags defined under Named Recognition Tasks. Later these tags are used in conjunction with pointer frameworks for the final chunking task. In our paper, we propose an Ensemble Model using a fine-tuned Transformer Model and a recurrent neural network model together to predict tags and chunk substructures of a sentence. We analyzed the shortcomings of the transformer models in predicting different tags and then trained the BILSTM+CNN accordingly to compensate for the same.
APA, Harvard, Vancouver, ISO, and other styles
10

Feng, A. X., Y. K. Zhang, D. W. Zuo, D. J. Kong, J. Z. Lu, X. D. Ren, J. Z. Zhou, C. P. Tang, and H. K. Xie. "Study on the residual stress state of TA2 titanium sheet metal formed perpendicularly with single pulsed laser." In ICO20:Lasers and Laser Technologies, edited by Y. C. Chen, Dianyuan Fan, Chunqing Gao, and Shouhuan Zhou. SPIE, 2006. http://dx.doi.org/10.1117/12.667190.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Laser tag"

1

Lees, Adrienne, and Doris Akol. There and Back Again: The Making of Uganda’s Mobile Money Tax. Institute of Development Studies (IDS), July 2021. http://dx.doi.org/10.19088/ictd.2021.012.

Full text
Abstract:
This paper evaluates the appropriateness of the tax policymaking process that led to the introduction, and the later adaptation, of a tax on mobile money transactions in Uganda in 2018. We examine the unusual source of the proposal, how this particular tax diverged from the usual tax policymaking process, and whether certain key stakeholders were excluded. We argue that weaknesses in the tax policymaking process undermined the quality of policy design, and resulted in a period of costly, and avoidable, policy adjustment. This case study is relevant for Uganda as well as for other low-income countries which could be exposed to similar challenges in designing effective taxes for the mobile money industry.
APA, Harvard, Vancouver, ISO, and other styles
2

Mayega, Jova, Ronald Waiswa, Jane Nabuyondo, and Milly Nalukwago Isingoma. How Clean Are Our Taxpayer Returns? Data Management in Uganda Revenue Authority. Institute of Development Studies (IDS), April 2021. http://dx.doi.org/10.19088/ictd.2021.007.

Full text
Abstract:
The paper assesses the cleanliness of taxpayer returns at the Uganda Revenue Authority (URA) in terms of: (a) completeness – the extent to which taxpayers submit all the required information as specified in the return forms; (b) accuracy – the extent to which the submitted information is correct; (c) consistency – the extent to which taxpayers submit similar information in cases where the same information is required in different types of tax returns, or submitted in the same type of tax return, but for different time periods; and (d) permanence – the extent to which the returns are likely to be later modified by taxpayers.
APA, Harvard, Vancouver, ISO, and other styles
3

Deru, Michael, and Kristin Field-Macumber. Energy Savings Modeling and Inspection Guidelines for Commercial Building Federal Tax Deductions for Buildings in 2016 and Later. Office of Scientific and Technical Information (OSTI), September 2016. http://dx.doi.org/10.2172/1324387.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Laser tag' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography