Relevant bibliographies by topics / Layered silicate

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Layered silicate'

Author: Grafiati
Published: 4 June 2021
Last updated: 8 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Layered silicate.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Layered silicate"

1

Khachatryan, L. A. "Disperse Layered Silicates in Magnesium Silicate Rocks." Glass Physics and Chemistry 30, no. 1 (January 2004): 67–72. http://dx.doi.org/10.1023/b:gpac.0000016400.42044.5b.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Cheaburu, Catalina Natalia, Cornelia Vasile, Donatella Duraccio, and Sossio Cimmino. "Characterisation of the Chitosan/Layered Silicate Nanocomposites." Solid State Phenomena 151 (April 2009): 123–28. http://dx.doi.org/10.4028/www.scientific.net/ssp.151.123.

Full text
Abstract:
Characterization of chitosan / layered silicate nanocomposites obtained by solution-mixing technique, having different compositions including treated and untreated montmorilonite (MMT) has been performed. The optimum amount of MMT and also the effect of nanoparticles type on nanocomposite properties by DSC, X-ray diffraction and TG measurements have been established. The chitosan chains were inserted into silicate layers to form the intercalated nanocomposites. The interlayer distance of the silicates in the nanocomposites enlarged as their amount increased. The stiffness and thermal stability enhanced.
APA, Harvard, Vancouver, ISO, and other styles
3

JIA, FEIFEI, and SHAOXIAN SONG. "EXFOLIATION AND CHARACTERIZATION OF LAYERED SILICATE MINERALS: A REVIEW." Surface Review and Letters 21, no. 02 (April 2014): 1430001. http://dx.doi.org/10.1142/s0218625x14300019.

Full text
Abstract:
Exfoliated silicate minerals have attracted great attentions because of the dramatic improvement in properties. This paper highlights the preparation of exfoliated silicate minerals, including physical, chemical, mixed physical and chemical methods. The mechanisms by which silicates are exfoliated and the important influential factors are also summarized. Finally, the instrumental techniques to characterize the exfoliated structure and exfoliation degree are presented.
APA, Harvard, Vancouver, ISO, and other styles
4

Chen, Chenggang, Mohammad Khobaib, and David Curliss. "Epoxy layered-silicate nanocomposites." Progress in Organic Coatings 47, no. 3-4 (September 2003): 376–83. http://dx.doi.org/10.1016/s0300-9440(03)00130-9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Zanetti, Marco, Sergei Lomakin, and Giovanni Camino. "Polymer layered silicate nanocomposites." Macromolecular Materials and Engineering 279, no. 1 (June 1, 2000): 1–9. http://dx.doi.org/10.1002/1439-2054(20000601)279:1<1::aid-mame1>3.0.co;2-q.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Giannelis, Emmanuel P. "Polymer Layered Silicate Nanocomposites." Advanced Materials 8, no. 1 (January 1996): 29–35. http://dx.doi.org/10.1002/adma.19960080104.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Jia, Meng, Zengping Zhang, Long Wei, Jiange Li, Dongdong Yuan, Xingjiao Wu, and Zhiyong Mao. "High- and Low-Temperature Properties of Layered Silicate-Modified Bitumens: View from the Nature of Pristine Layered Silicate." Applied Sciences 9, no. 17 (August 31, 2019): 3563. http://dx.doi.org/10.3390/app9173563.

Full text
Abstract:
Layered silicates, as bitumen modifiers, have received increasing attention. The main objective of this study was to evaluate the influence of layered silicates on bitumen properties. For this study, montmorillonite (MMT), rectorite (REC), organic montmorillonite (OMMT), and organic rectorite (OREC) were selected. The layered structure type of layered silicates was characterized by SEM (scanning electron microscope) and XRD (X-ray diffraction diffractometer). Tests for determining high-temperature properties included viscosity, DSR (dynamic shear rheometer), and TG (thermogravimetry) tests, and studies for determining the low-temperature properties were conducted by BBR (bending beam rheometer) and DSC (differential scanning calorimetry) tests. Our results show that MMT, REC, OMMT, and OREC were all intercalated structures. OREC had the largest d001 interlayer space, followed by REC, OMMT, and MMT. OREC improved the high-temperature property of virgin bitumen more effectively than OMMT. Meanwhile, REC-modified bitumen exhibited a high-temperature property similar to OMMT-modified bitumen. When compared with REC and OREC, MMT and OMMT were less efficient in reducing the low-temperature properties of virgin bitumen, and OMMT was the least efficient. Therefore, it can be concluded that the nature of pristine layered silicates has a great impact on the high- and low-temperature properties of bitumen. Moreover, organic treatment can simultaneously improve the high- and low-temperature properties of layered silicate-modified bitumens.
APA, Harvard, Vancouver, ISO, and other styles
8

Čeklovský, Alexander, Adriana Czímerová, Kamil Lang, and Juraj Bujdák. "Layered silicate films with photochemically active porphyrin cations." Pure and Applied Chemistry 81, no. 8 (June 30, 2009): 1385–96. http://dx.doi.org/10.1351/pac-con-08-08-35.

Full text
Abstract:
The objective of this study was to prepare and characterize hybrid films based on layered silicates with a tetracationic porphyrin dye 5,10,15,20-tetrakis(N-methylpyridinium-4-yl)porphyrin (TMPyP) intercalated in the inorganic matrix. The properties of the TMPyP cations in the materials were compared with those of other systems (solutions, colloids) characterized mainly by absorption and fluorescence spectroscopies. Linearly polarized absorption spectroscopy, X-ray diffraction (XRD), and fluorescence microscopy were used as well. Using appropriate layered silicate templates, applying the premodification of the inorganic component with hydrophobic alkylammonium surfactants and selecting an appropriate method, one can prepare the materials of broadly variable spectral properties of the dye. The spectral variation takes place while preserving the photochemical activity of TMPyP. The interpretations of spectral changes are based on the structural changes of the TMPyP molecules adsorbed on layered silicate surface related to the flattening of cationic pyridinium substituents.
APA, Harvard, Vancouver, ISO, and other styles
9

Kim, G. M., S. Goerlitz, and G. H. Michler. "Deformation mechanism of nylon 6/layered silicate nanocomposites: Role of the layered silicate." Journal of Applied Polymer Science 105, no. 1 (2007): 38–48. http://dx.doi.org/10.1002/app.26067.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Ko, Younghee, Myung Hun Kim, Sun Jin Kim, and Young Sun Uh. "Synthesis of Co-silicalite-1 from a layered silicate." Korean Journal of Chemical Engineering 18, no. 3 (May 2001): 392–95. http://dx.doi.org/10.1007/bf02699184.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Layered silicate"

1

Al-Shahrani, Abdullah A. "Layered silicate nanocomposites." Thesis, University of Manchester, 2008. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.492712.

Full text
Abstract:
Over the past decade, nanomaterials have been the subject of enormous interest. Notable for their extremely small feature size, they have the potential for wide-ranging industrial applications. Using such materials combined with epoxy resin to synthesise nanocomposite is proposed to enhance the corrosion protection performance of the resin.
APA, Harvard, Vancouver, ISO, and other styles
2

Işık, Kıvanç Tanoğlu Metin. "Layered silicate/polypropylene nanocomposites/." [s.l.]: [s.n.], 2006. http://library.iyte.edu.tr/tezler/master/makinamuh/T000532.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Becker, Lars-Ole 1973. "High performance epoxy-layered silicate nanocomposites." Monash University, School of Physics and Materials Engineering, 2003. http://arrow.monash.edu.au/hdl/1959.1/5747.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Kaya, Elçin Dilek Tanoğlu Metin. "Development of layered silicate/epoxy nanocomposite/." [s.l.]: [s.n.], 2006. http://library.iyte.edu.tr/tezler/master/malzemebilimivemuh/T000538.pdf.

Full text
Abstract:
Thesis (Master)--İzmir Institute Of Technology, İzmir, 2006.
Keywords: epoxy resin, nanocomposites, clay, scanning electron microscope, mechanical properties. Includes bibliographical references (leaves. 93-98).
APA, Harvard, Vancouver, ISO, and other styles
5

Lightwing, Andrew. "Catastrophic disruption of layered ice-silicate bodies." Thesis, University of Kent, 2011. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.589961.

Full text
Abstract:
Large icy Kuiper Belt Objects (KBOs) such as Pluto have observed densities on the order of 1.8 - 2.0 g cm-3. This indicates that they are made up of some combination of ice and silicate material; their size further implies that they will possess a differentiated structure with ice dominating towards the surface and silicate material dominating towards the core. A series of impact experiments using the University of Kent's light gas gun have been carried out in order to determine the impact strength of spherical layered ice-silicate targets that reflect the suspected structure of these bodies. Impacts are also carried out on unlayered ice-silicate targets and pure ice targets for the purposes of comparison. Impact velocities ranged from 1 to 7 km S-1 using a range of projectile sizes and materials including stainless steel, titanium, aluminium and copper. Data from previous work undertaken at the University of Kent is incorporated in order to provide a more complete picture of target behaviour.
APA, Harvard, Vancouver, ISO, and other styles
6

Kato, Ryo. "Interfacial interactions in polymer layered silicate nanocomposites." Thesis, Manchester Metropolitan University, 2008. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.491172.

Full text
Abstract:
Polymer layered silicate nanocomposites (PLSN) have attracted great interest because they exhibit remarkable improvements in materials properties relative to pristine polymers. Successful formation of a PLSN is critically dependent on generation of very high interfacial area in the composite. This is accomplished when the stacks of silicate platelets (tactoids) split into discrete platelets. The latter phenomenon is known as exfoliation and is strongly influenced by interfacial chemistry (i.e. structure and properties of the interface or interphase) associated with the edge and basal surfaces of the silicate platelets, chemical modification (usually with quaternary alkyl ammonium halides) of the latter and the resulting effect on interactions between the platelets themselves and polymer chains. Interactions between sodium montmorillonite (Na-MMT)/organically modified montmorillonite (o-MMT) and a variety of probes, some of which are intended to model the structures present in the components of a polyurethane (PU), epoxy resin and polystyrene system (PS), have been studied. The adsorption process was characterised using flow microcalorimetry (FMC) in conjuncqon with diffuse reflectance Fourier transform infrared spectroscopy (DRIFTS), and wide angle x-ray scattering (\VAXS). Adsorption of hydrogen bondable groups, such as alcohol, ether, amine probes, onto Na-MMT was dominated by the hydrogen bonding interactions with hydrated Na+ ions and with the hydroxyl groups present at the platelet edges. Moreover, stronger interactions with hydrated Na+ ions led to greater retention of the probes after the desorption process. When the Na-MMT was moisturized at ambient atmosphere, hydrogen bondable probes showed a reversible adsorption. In contrast, chemical adsorption (reaction) dominated the adsorption of the isocyanate probe onto Na-MMT; the latter reacted either with the platelet edge hydroxyl groups forming a urethane linkage or with pre-adsorbed ambient water molecules adsorbed onto Na-MMT ultimately forming a physically adsorbed urea. In the case of o-MMTs, when only the platelet edge hydroxyl groups were available, hydrogen bondable probes showed a reversible adsorption. Reactions between reactive probes, including isocyanate and epoxide probes, and surfactant functional groups (OH and COOH groups) are affected by the gallery structures, such as the arrangement of surfactant within the galleries and level of surfactant intercalated. Adsorption of aromatic probes, including styrene, ethylbenzene and polystyrene, was dominated by the relatively weak dispersive interactions with the basal surfaces of o-MMT, and was significantly affected by the gallery structures ofo-MMT (surfactant level and surfactant structure). This study has provided valuable new insight into interactions in nanocomposite materials.
APA, Harvard, Vancouver, ISO, and other styles
7

Lander, Julie-Anne. "Structure development in silicate-layered polymer nanocomposites." Thesis, Brunel University, 2002. http://bura.brunel.ac.uk/handle/2438/4390.

Full text
Abstract:
The demands made of materials have resulted in the formation of complex composite structures; one such example of these is nanocomposites. This study is primarily devoted to the preparation and characterisation of nanocomposites. Reactively cast and reactively extruded nanocomposite strategies for the preparation of polyamide-6 composites were compared. The catalyst and activator system selected was based on an industrially successful combination. The extruder screw and barrel configuration used had previously been proven effective for the reactive polymerisation of polyamide-6. The principal objectives were the investigation of the influence of layered-silicates on both the microstructure and the physical properties of the composites. As well as the analysis of the mechanisms that influence the physical performance of the materials produced. The characterisation of the filler-matrix microstructure and its effect on physical properties of the composites were investigated using a range of chromatographic, microscopic, thermal and X-ray analytical techniques. Selected mechanical properties were measured using standard test procedures. Therefore results obtained and subsequent trends observed in reaction cast and reaction extruded nanocomposites could be compared and contrasted. The influence of the polymerisation conditions, residual monomer content and the nature of the composite structure produced were considered. It was observed that the nature of the matrix crystalline structure could be greatly influenced by the material composition, method of preparation and processing technique. The crystal form of the spherulites present appeared to be the key factor in influencing mechanical strength. The treatment of the silicate-layered clay successfully increased the inter-layer spacings, which was further increased by the presence of high shear forces.
APA, Harvard, Vancouver, ISO, and other styles
8

Lewis, M. N. "Styrene-ethylene/butylene-styrene layered silicate nanocomposites." Thesis, Queen's University Belfast, 2006. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.432525.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Ha, Yung-Hoon Sam 1975. "Hierarchical layered-silicate-- lamellar triblock copolymer nanocomposites." Thesis, Massachusetts Institute of Technology, 2002. http://hdl.handle.net/1721.1/29969.

Full text
Abstract:
Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Materials Science and Engineering, February 2003.
Includes bibliographical references.
The fundamental role of the layered-silicates in a styrene-butadiene-styrene triblock copolymer (SBS) as a function of layered-silicate dispersion during deformation was investigated. Predominantly immiscible composites of mixed morphology provided the initial proof that dramatic alteration of the SBS deformation behavior exists, but a clear understanding of the nature of reinforcement was precluded due to the fiber symmetric orientation of the SBS and the mixed clay morphologies. Following the theory of Vaia and Giannelis, use of a more hydrophobic organically modified clay resulted in an intercalated morphology with a near single crystalline texture of the SBS due to roll-casting. Significant heterogeneous deformation was observed at ambient conditions as well as at elevated temperature as verified through Cohen's affine deformation model in combination with Kratky's scattering pattern model. The intercalated morphology shows little or modest mechanical property enhancements at all temperatures studied. Exfoliated nanocomposite was produced by functionalization of the clay surfaces with polystyrene, altering the enthalpic interactions. Entropic interactions were also controlled by varying the molecular weight of the surfactant and the grafting density and shows remarkable agreement with the theory proposed by Balazs et al. Due to the increase surface volume ratio of the clay, a flipping transition of the block copolymer morphology was observed during roll-casting producing a near single crystalline parallel/parallel clay/BCP orientation. The modulus was relatively unaffected whereas the toughness increased significantly due to an earlier onset of strain hardening.
by Yung-Hoon Sam Ha.
Ph.D.
APA, Harvard, Vancouver, ISO, and other styles
10

Kornmann, Xavier. "Synthesis and characterisation of thermoset-layered silicate nanocomposites." Doctoral thesis, Luleå, 2001. http://epubl.luth.se/1402-1544/2001/14/index.html.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Layered silicate"

1

Ke, Y. C. Polymer-layered silicate and silica nanocomposites. Boston, Mass: Elsevier, 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Howie, R. A. (Robert Andrew), Zussman J, and Geological Society of London, eds. Layered silicates excluding micas and clay minerals. 2nd ed. London: Geological Society, 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Jiang, Zhimei. Structural investigations of layered silicates by vibrational spectroscopy. Sudbury, Ont: Laurentian University, Chemistry and Biochemistry Department, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Boyd, S. A., W. J. Farmer, W. F. Jaynes, G. Lagaly, D. A. Laird, and A. R. Mermut. Layer Charge Characteristics of 2:1 Silicate Clay Minerals. Edited by A. R. Mermut and R. E. Ferrell. PO Box 460130 Aurora, CO 80046-0130 USA: Clay Minerals Society, 1994. http://dx.doi.org/10.1346/cms-wls-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

I, Tarasevich I͡U. Stroenie i khimii͡a poverkhnosti sloistykh silikatov. Kiev: Nauk. dumka, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Mortin, Lindsey Amanda. The significance of the silica-rich layer in the response of bone-derived cells to bioglass in vitro. Birmingham: University of Birmingham, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Polymer-Layered Silicate and Silica Nanocomposites. Elsevier, 2005. http://dx.doi.org/10.1016/b978-0-444-51570-4.x5000-9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Okamoto, M. Polymer/layered Silicate Nanocomposites (Rapra Review Reports). Rapra Technology, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Pandey, Jitendra K., Kummetha Raghunatha Reddy, Amar Kumar Mohanty, and Manjusri Misra. Handbook of Polymernanocomposites. Processing, Performance and Application : Volume A: Layered Silicates. Springer, 2016.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Pandey, Jitendra K., Kummetha Raghunatha Reddy, Amar Kumar Mohanty, and Manjusri Misra. Handbook of Polymernanocomposites. Processing, Performance and Application : Volume A: Layered Silicates. Springer, 2014.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Layered silicate"

1

Becker, Ole, George P. Simon, and Karel Dusek. "Epoxy Layered Silicate Nanocomposites." In Inorganic Polymeric Nanocomposites and Membranes, 29–82. Berlin, Heidelberg: Springer Berlin Heidelberg, 2005. http://dx.doi.org/10.1007/b107204.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Akbari, Abozar, Mahsa A. Tehrani, and Hossien Cherghibidsorkhi. "Polysterene Layered Silicate Nanocomposites." In Handbook of Polymernanocomposites. Processing, Performance and Application, 205–21. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-38649-7_16.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Werpy, Todd A., Laurent J. Michot, and Thomas J. Pinnavaia. "New Tubular Silicate-Layered Silicate Nanocomposite Catalyst." In Novel Materials in Heterogeneous Catalysis, 119–28. Washington, DC: American Chemical Society, 1990. http://dx.doi.org/10.1021/bk-1990-0437.ch012.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Md Akil, Hazizan, Nur Suraya Anis Ahmad Bakhtiar, and Nor Hafizah Che Ismail. "Hybrid Polymer Layered Silicate Nanocomposites." In Nanoclay Reinforced Polymer Composites, 195–207. Singapore: Springer Singapore, 2016. http://dx.doi.org/10.1007/978-981-10-1953-1_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Sapkota, Janak, and Amit Das. "Layered Silicate-Based Rubber Nanocomposites." In Encyclopedia of Polymeric Nanomaterials, 1055–61. Berlin, Heidelberg: Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-642-29648-2_296.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Sapkota, Janak, and Amit Das. "Layered Silicate-Based Rubber Nanocomposites." In Encyclopedia of Polymeric Nanomaterials, 1–8. Berlin, Heidelberg: Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-36199-9_296-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Solin, S. A. "Alumino-Silicate Clays and Clay Intercalation Compounds." In Intercalation in Layered Materials, 145–54. Boston, MA: Springer US, 1986. http://dx.doi.org/10.1007/978-1-4757-5556-5_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Sinha Ray, Suprakas, and Vincent Ojijo. "A Brief Overview of Layered Silicates and Polymer/Layered Silicate Nanocomposite Formation." In Processing of Polymer-based Nanocomposites, 57–86. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-97779-9_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Bergaya, Faïza, Maguy Jaber, and Jean-François Lambert. "Clays and Clay Minerals as Layered Nanofillers for (Bio)Polymers." In Environmental Silicate Nano-Biocomposites, 41–75. London: Springer London, 2012. http://dx.doi.org/10.1007/978-1-4471-4108-2_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Tehrani, Mahsa A., Abozar Akbari, and Mainak Majumder. "Polylactic Acid (PLA) Layered Silicate Nanocomposites." In Handbook of Polymernanocomposites. Processing, Performance and Application, 53–67. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-38649-7_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Layered silicate"

1

Miller, Sandi, and Michael Meador. "Polymer- Layered Silicate Nanocomposites for Cryotank Applications." In 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 2007. http://dx.doi.org/10.2514/6.2007-2322.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Guastavino, F., A. Dardano, G. C. Montanari, F. Deorsola, and L. Testa. "Electrical tree growth in EVA-layered silicate nanocomposites." In 2006 IEEE Conference on Electrical Insulation and Dielectric Phenomena. IEEE, 2006. http://dx.doi.org/10.1109/ceidp.2006.311927.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Holtz, M., S. A. Solin, and T. J. Pinnavaia. "Pressure-Raman studies of layered alumino-silicate compounds." In High-pressure science and technology—1993. AIP, 1994. http://dx.doi.org/10.1063/1.46376.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Schmidt, Peter, Andreas Tuecks, Helmut Bechtel, Detlef Wiechert, Regina Mueller-Mach, Gerd Mueller, and Wolfgang Schnick. "Layered oxonitrido silicate (SiON) phosphors for high power LEDs." In Optical Engineering + Applications, edited by Ian T. Ferguson, Tsunemasa Taguchi, Ian E. Ashdown, and Seong-Ju Park. SPIE, 2008. http://dx.doi.org/10.1117/12.793000.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Dirama, Taner E., and Lloyd A. Goettler. "Processing Characteristics of Layered Silicate Nanocomposites With Application to Blown Film." In ASME 2002 International Mechanical Engineering Congress and Exposition. ASMEDC, 2002. http://dx.doi.org/10.1115/imece2002-33942.

Full text
Abstract:
The aim of this study is to investigate the film blowing processing of various polyamide 6-based layered silicate nanocomposites (LSN’s) and to correlate their processing behaviors to the underlying rheology and structure. In-situ polymerized nanocomposites were found to possess a wider processing window compared to the base PA6. Shear and dynamic rheological measurements were employed to correlate the rheological behavior of the nanocomposites to the bubble formation and stability in the film blowing process. The in-situ plymerized LSN melts having higher elastic modulus (G′) were found to perform better in the film blowing process. DSC measurements indicated that nanoclays induce the γ type of crystallinity, which may also play a role in film blowing behavior.
APA, Harvard, Vancouver, ISO, and other styles
6

Awad, Walid, Amal Esawi, and Adham Ramadan. "Fabrication and Properties of Nylon-6/Layered Silicate Nanocomposites by Melt Blending." In ASME 2008 2nd Multifunctional Nanocomposites and Nanomaterials International Conference. ASMEDC, 2008. http://dx.doi.org/10.1115/mn2008-47039.

Full text
Abstract:
Polymer/clay nanocomposites currently attract immense interest from both research and industrial communities. By dispersing at the molecular level a tiny amount of clay within a polymeric matrix, a wide range of properties can be significantly improved. The efficiency of the clay (layered silicate) in improving the properties of the polymer materials is primarily determined by the degree of its dispersion in the polymer matrix. To promote the molecular and stable dispersion of the clay layers, the clays should be organically-modified with onium salts. In this work, nylon-6 nanocomposites based on two types of commercial organoclays were prepared by melt blending via single-screw extrusion. The good dispersion of clay in the nylon-6 nanocomposites was confirmed by X-ray diffraction and transmission electron microscopy. The influence of the dispersed nano-clay fillers on the thermal and mechanical properties of the resulting nanocomposites was characterized using thermogravimetric analysis and nanoindentation.
APA, Harvard, Vancouver, ISO, and other styles
7

Coppola, B., N. Cappetti, L. Di Maio, P. Scarfato, and L. Incarnato. "Layered silicate reinforced polylactic acid filaments for 3D printing of polymer nanocomposites." In 2017 IEEE 3rd International Forum on Research and Technologies for Society and Industry - Innovation to Shape the Future for Society and Industry (RTSI). IEEE, 2017. http://dx.doi.org/10.1109/rtsi.2017.8065892.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Sleptsova, S. A., Yu V. Kapitonova, N. N. Lazareva, A. A. Okhlopkova, and L. A. Grigoryeva. "Effect of ultrasonic vibrations on the properties of PTFE/layered silicate + magnesium spinel." In PROCEEDINGS OF THE ADVANCED MATERIALS WITH HIERARCHICAL STRUCTURE FOR NEW TECHNOLOGIES AND RELIABLE STRUCTURES. Author(s), 2018. http://dx.doi.org/10.1063/1.5083531.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Hussain, Farzana, Derrick Dean, and Anwarul Haque. "Structures and Characterization of Organoclay-Epoxy-Vinylester Nanocomposites." In ASME 2002 International Mechanical Engineering Congress and Exposition. ASMEDC, 2002. http://dx.doi.org/10.1115/imece2002-33552.

Full text
Abstract:
The field of polymer-clay nanocomposites has attracted considerable attention as a method of enhancing polymer properties and extending their utility. Layered silicates dispersed as a reinforcing phase in a polymer matrix are one of the most important forms of such inorganic-organic nanocomposites, making them the subject of intense research. We have recently prepared several thermoset-based nanocomposites with improved thermal and mechanical properties. This paper is primarily focused in studying the effects of nano clay particles such as montmorillonite on improving mechanical and thermal properties of the polymer matrix composite. Epoxy and vinyl ester nanocomposites were prepared by adding different weight percentages (0.5%, 1%, 2%, 5% and 10%) of montmorillonite nano clay particles to epoxy and vinyl ester matrices. The results show significant improvements in mechanical and thermal properties of the nanostructured materials with low loading of organo silicates. Thermal property measurement includes dynamic mechanical analysis (DMA). Mechanical properties such as flexural strength and flexural modulus of polymer matrix were improved in nano structured materials owing to their unique phase morphology and improved interfacial interactions. Molecular dispersion of the layered silicate within the cross-linked matrix was verified using Wide Angle X-Ray Diffraction (WAXD) and Transmission Electron Microscopy (TEM) revealing the intercalated nanocomposites were formed.
APA, Harvard, Vancouver, ISO, and other styles
10

Pandini, S., F. Baldi, F. Bignotti, T. Riccò, Alberto D’Amore, Domenico Acierno, and Luigi Grassia. "EFFECT OF FREQUENCY ON THE FATIGUE CRACK PROPAGATION OF A POLYAMIDE 6∕LAYERED-SILICATE NANOCOMPOSITE." In IV INTERNATIONAL CONFERENCE TIMES OF POLYMERS (TOP) AND COMPOSITES. AIP, 2008. http://dx.doi.org/10.1063/1.2989029.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Layered silicate"

1

Kurian, Mary K., Arnab Dasgupta, Mary E. Galvin, and Frederick L. Beyer. Effect of Textured Surfactant Brushes on Polymer-Layered Silicate Nanocomposite Morphology. Fort Belvoir, VA: Defense Technical Information Center, February 2004. http://dx.doi.org/10.21236/ada420985.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Ostermayer, David, Frederick L. Beyer, Peter G. Dehmer, and Melissa A. Klusewitz. Measurement of V50 Behavior of a Nylon 6-Based Polymer-Layered Silicate Nanocomposite. Fort Belvoir, VA: Defense Technical Information Center, September 2001. http://dx.doi.org/10.21236/ada399371.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Cooke, D. W., E. H. Farnum, F. W. Clinard, Jr, B. L. Bennett, and A. M. Portis. Optical properties of silica fibers and layered dielectric mirrors. Office of Scientific and Technical Information (OSTI), April 1996. http://dx.doi.org/10.2172/270459.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Fripiat, J. J. Aluminum coordination and active sites on aluminas, Y zeolites and pillared layered silicates. Office of Scientific and Technical Information (OSTI), January 1991. http://dx.doi.org/10.2172/5874814.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Fripiat, J. J. [Aluminum coordination and active sites on aluminas, Y-zeolites and pillared layered silicates]. Progress report. Office of Scientific and Technical Information (OSTI), February 1994. http://dx.doi.org/10.2172/10122411.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Fripiat, J. J. Aluminum coordination and active sites on aluminas, Y zeolites and pillared layered silicates. Progress report, June 1, 1990--January 31, 1992. Office of Scientific and Technical Information (OSTI), December 1991. http://dx.doi.org/10.2172/10123002.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

E. Tada and G.S. Frankel. Localized Corrosion Behavior of Type 304SS with a Silica Layer Under Atmospheric Corrosion Environments. Office of Scientific and Technical Information (OSTI), March 2006. http://dx.doi.org/10.2172/893925.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Layered silicate' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography