Relevant bibliographies by topics / Lengthy materials

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Lengthy materials'

Author: Grafiati
Published: 28 May 2022
Last updated: 30 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Lengthy materials.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Lengthy materials"

1

Kai Jian, Ding. "Developing the theory of continuous pressing products made of ultra - dispersed composite powder materials." Interactive science, no. 6 (82) (July 28, 2023): 58–61. http://dx.doi.org/10.21661/r-559449.

Full text
Abstract:
In article there are discussed the basic results of theoretical investigating continuous ultra-dispersed powder materials pressing process for obtaining lengthy products with nano-crystal structure. Within the framework of the hypothesis about similarity under stress conditions in compressible and incompressible materials in the pressing channel, the pressure distribution along the pressing channel is established. Using G.M. Zhdanovich equation with new material density distribution boundary conditions along the length of the pressing channel is found.
APA, Harvard, Vancouver, ISO, and other styles
2

Chashnikova, Ekaterina. "Localisation of promotional materials for pharma." Medical Writing 33, no. 1 (2024): 58–61. http://dx.doi.org/10.56012/ajhl9537.

Full text
Abstract:
Unwarranted changes by the client, lengthy approvals, and multiple rounds of revision – localisation of promotional materials for pharmaceutical companies can become a nightmare if the localisation specialist is unaware of heavy regulations in the industry. The goal of localisation is not only to convey the meaning in the target language, but also to adapt the content for another country or region. When localising promotional materials for the pharmaceutical market, the secret to success lies in placing them in a wider context and accounting for additional factors such as content creation work
APA, Harvard, Vancouver, ISO, and other styles
3

Liu, J. H., A. G. Atkins, and G. Jeronimidis. "Relationship Between the External Force and the Specific Work of Fracture R for Steady-State Tearing and Peeling of Elastoplastic Materials." Journal of Applied Mechanics 68, no. 5 (2001): 758–65. http://dx.doi.org/10.1115/1.1387020.

Full text
Abstract:
A simple relationship is obtained between the external force F and the fracture toughness R for thin sheets in steady state elastoplastic combined tearing and peeling along self-similar paths. The relationship depends only on the material properties (E, σy, and α for an elastoplastic material with linear hardening) and strip cross section (B and H). An earlier analysis (which incorporates transient tearing and peeling) requires lengthy computations over the whole length of the strip. The present analysis avoids that complication. Experiments in steady-state agree with the theory.
APA, Harvard, Vancouver, ISO, and other styles
4

Glagolev, V. V., P. V. Zubarev, and A. G. Sintsov. "Strength of the pyroceram So115M under lengthy static loading." Strength of Materials 28, no. 1 (1996): 74–75. http://dx.doi.org/10.1007/bf02209103.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Mishchenko, L. D., I. N. Pisanenko, V. P. Tarabanova, and S. S. D'yachenko. "Nature of crack nucleation in lengthy operation of turbine castings." Strength of Materials 20, no. 2 (1988): 271–73. http://dx.doi.org/10.1007/bf01522938.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Taneja, Tanvi, Mukesh Kumar, Indu Sharma, Atul Sharma, and Raj Singh. "The Role of Mycobiota in the Process of Composting of Biomass and Assessment." Bulletin of Pure & Applied Sciences- Botany 42, no. 1 (2023): 19–26. http://dx.doi.org/10.48165/bpas.2023.42b.1.4.

Full text
Abstract:
Various fungi play a crucial part in the decomposition of organic materials during composting, which is a cost-effective process of converting various unstable and complicated organic substances into a stable and humus-like substance. Composting is the regulated transformation of wastes and biodegradable organic materials into stable products with the help of microbes. Although composting has been around for a while, it still has significant drawbacks that limit how widely it is utilized and how effectively it works. Microbes detection, nutrient status that is low, a lengthy composting process
APA, Harvard, Vancouver, ISO, and other styles
7

Williams, Chris. "Use of written cognitive–behavioural therapy self-help materials to treat depression." Advances in Psychiatric Treatment 7, no. 3 (2001): 233–40. http://dx.doi.org/10.1192/apt.7.3.233.

Full text
Abstract:
Both primary and secondary care practitioners often wish to offer their patients access to effective psychosocial interventions, yet the lengthy waiting-lists for specialised psychological or psychotherapeutic services create frustration among both referrers and their patients. There is therefore a need for new ways of accessing such treatments that can be delivered in most psychiatric team settings. For this to be realistic, such delivery must be possible within the time available to most practitioners (10–20 minutes for many consultant psychiatrists). One approach is to offer structured self
APA, Harvard, Vancouver, ISO, and other styles
8

Shcherbakov, A. S., and E. I. Andreeva. "Performance Data of Lengthy-Span Soliton Transmission System." Optical Fiber Technology 2, no. 2 (1996): 127–33. http://dx.doi.org/10.1006/ofte.1996.0014.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Suryaningsih, Sherly, Vania Zulfa, and Hamiyati. "The effect of Lemna perpusilla Torr. (Araceae) as fodder in the growth of Osphronemus goramy Lacépède, 1801." Bioma 20, no. 1 (2024): 21–29. http://dx.doi.org/10.21009/bioma20(1).3.

Full text
Abstract:
Production of gourami as consumption fish is rather lengthy, as it attains commercial size in 1—2 years, longer than other commercial fish. Therefore, fish production is hampered by higher fodder costs. It is a normal practice in gourami rearing, that farmers supplement commercial fodder with naturally available fodder, especially from material such as taro leaves. However, some materials may contain less nutrients, compared to others. It is why we propose the use of Lemna perpusilla, a widely distributed water aroid as gourami fodder supplement. We measured the growth of gourami fries, which
APA, Harvard, Vancouver, ISO, and other styles
10

Kahn, Alice, and Mary Pannbacker. "Readability of Educational Materials for Clients With Cleft Lip/Palate and Their Families." American Journal of Speech-Language Pathology 9, no. 1 (2000): 3–9. http://dx.doi.org/10.1044/1058-0360.0901.03.

Full text
Abstract:
Educational materials for clients with cleft lip/palate and their families and materials for the general public produced by the American Speech-Language-Hearing Association were analyzed for readability. The SMOG Grading Formula, a simple, fast procedure for predicting grade-level difficulty of written material, and the Fry index of readability, a more lengthy measure of readability, were used to analyze 30 publications. Reading levels were computed, and results ranged from elementary to college level. The majority of materials were written at or above the high school readability level. Result
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Lengthy materials"

1

Панич, Андрій Олександрович, Андрей Александрович Паныч та Andrii Oleksandrovych Panych. "Інтелектуальна система підтримки прийняття рішень для автоматизації порізу довгомірних матеріалів". Thesis, Видавництво СумДУ, 2011. http://essuir.sumdu.edu.ua/handle/123456789/25298.

Full text
Abstract:
Використання інтелектуальної складової в системі керування електроприводом летючої пили дозволило підвищити точність порізу оброблюваних матеріалів і зменшити ресурсовитрати шляхом надання системі властивості адаптивності. Одним із перспективних напрямів подальших досліджень є розроблення інформаційного та програмного забезпечення системи керування електроприводом летючої пили, що функціонує в режимі самонавчання. При цитуванні документа, використовуйте посилання http://essuir.sumdu.edu.ua/handle/123456789/25298
APA, Harvard, Vancouver, ISO, and other styles
2

Alabi, Taiwo Raphael. "Design of photomodifiable material systems for maskless patterning of functional ceramic and metallic materials at multiple length scales." Diss., Georgia Institute of Technology, 2013. http://hdl.handle.net/1853/51709.

Full text
Abstract:
Silicon and silicon-based materials have been investigated for the fabrication of electronic, optoelectronic, solar, and structural/mechanical devices. To enable the continuous use of silicon-based materials for next generation device applications, new and inexpensive ways of fabricating features of silicon, and silica-based materials are needed. This dissertation investigates: 1) novel techniques for the fabrication of silica and silicon nanofeatures with potential application in the electronics and optoelectronics industry; 2) new designs of photomodifiable material systems (resists) for mas
APA, Harvard, Vancouver, ISO, and other styles
3

Carman, Greg P. "Micromechanics of finite length fibers in composite materials." Diss., Virginia Tech, 1991. http://hdl.handle.net/10919/39869.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Scardia, Lucia. "Asymptotic derivation of models for materials with small length scales." Doctoral thesis, SISSA, 2007. http://hdl.handle.net/20.500.11767/3925.

Full text
Abstract:
We now give an overview of the content of this thesis, which consists of two parts. In the first part we present some results concerning the derivation of asymptotic models for thin curved rods (see Chapters 2 and 3). The second part is devoted to the study of homogenization problems for composite materials (see Chapters 4 and 5) and for porous media (see Chapter 6).
APA, Harvard, Vancouver, ISO, and other styles
5

Agde, Tjernlund Jessica. "Length-scale effects in yielding and damage development in polymer materials." Licentiate thesis, Stockholm, 2005. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-485.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Karimpour, Morad. "Modelling of interfacial problems at various length scales in polycrystalline materials." Thesis, Imperial College London, 2012. http://hdl.handle.net/10044/1/14640.

Full text
Abstract:
The goal of this research project was to develop a modelling technique making it possible to simulate grain boundaries and inclusion-matrix material interfaces using numerical techniques. This is particularly of interest when investigating the effects of grain boundary sliding and decohesion of the material interfaces under hot deformation conditions. This can then be used to predict damage nucleation and growth at the grain boundaries applicable to both creep type damage and plasticity induced damage. A novel scheme was developed based on the Controlled Voronoi Poisson’s Tessellation techniqu
APA, Harvard, Vancouver, ISO, and other styles
7

Fabian, Omar. "Synthetic routes to monodisperse gold nanoparticles stabilized by different-length alkanethiols." Thesis, Massachusetts Institute of Technology, 2008. http://hdl.handle.net/1721.1/43211.

Full text
Abstract:
Thesis (S.B.)--Massachusetts Institute of Technology, Dept. of Materials Science and Engineering, 2008.<br>Includes bibliographical references (leaf 31).<br>My thesis explored three different synthesis routes toward obtaining monodisperse clutches of well-ordered nanoparticles stabilized by various alkanethiols. The first two synthesis methods were based on a two-phase system employing first tetraoctylammonium bromide (TOAB) as a phase transfer catalyst and then didodecyldimethylammonium bromide (DDAB). Though these methods approximated what could be considered monodisperse nanoparticles ([sig
APA, Harvard, Vancouver, ISO, and other styles
8

Gabrys, Paul A. (Paul Anthony). "Controlling structure across length scales with directed assembly of colloidal nanoparticles." Thesis, Massachusetts Institute of Technology, 2020. https://hdl.handle.net/1721.1/127895.

Full text
Abstract:
Thesis: Ph. D., Massachusetts Institute of Technology, Department of Materials Science and Engineering, May, 2020<br>Cataloged from the official PDF of thesis.<br>Includes bibliographical references (pages 319-334).<br>One of the promises of nanotechnology is the ability to create a bulk, designer material with its structure programmed at each length scale using deterministic control over the placement of each nanoscale component. Self-assembled nanoparticle colloids, particularly those directed by sequence-specific DNA hybridizations, have emerged as a promising building block for producing t
APA, Harvard, Vancouver, ISO, and other styles
9

Galanis, Konstantinos 1970. "Hull construction with composite materials for ships over 100 m in length." Thesis, Massachusetts Institute of Technology, 2002. http://hdl.handle.net/1721.1/28255.

Full text
Abstract:
Thesis (Nav.E. and S.M. in Ocean Systems Management)--Massachusetts Institute of Technology, Dept. of Ocean Engineering, 2002.<br>Includes bibliographical references (leaves 124-132).<br>The operational envelope of the maritime industry requires high performance marine vessels, which demand increased structural integrity and durability, coupled with significant weight reduction and minimization of cost. The design and fabrication of a "large vessel" by use of composite materials is within the current technology. However, a number of major technical and economic aspects are questionable. This s
APA, Harvard, Vancouver, ISO, and other styles
10

Mangano, Enzo. "Rapid screening of novel nanoporous materials for carbon capture separations." Thesis, University of Edinburgh, 2013. http://hdl.handle.net/1842/9497.

Full text
Abstract:
In this work the experimental results from the rapid screening and ranking of a wide range of novel adsorbents for carbon capture are presented. The samples were tested using the Zero Length Column (ZLC) method which has proved to be an essential tool for the rapid investigation of the equilibrium and kinetic properties of prototype adsorbents. The study was performed on different classes of nanoporous materials developed as part of the EPSRC-funded “Innovative Gas Separations for Carbon Capture” (IGSCC) project. More than 120 novel adsorbents with different key features for post-combustion ca
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Lengthy materials"

1

Golden, Kenneth M. Mathematics of Multiscale Materials. Springer New York, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Organisation Internationale de Métrologie Légale. Material measures of length for general use. 2nd ed. OIML, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Dumitrica, Traian. Trends in Computational Nanomechanics: Transcending Length and Time Scales. Springer Science+Business Media B.V., 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Irons, Calvin. The new fence: A story about length. Kingscourt, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Babcock, C. O. True uniaxial compressive strengths of rock or coal specimens are independent of diameter-to-length ratios. U.S. Dept. of the Interior, Bureau of Mines, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Babcock, C. O. True uniaxial compressive strengths of rock or coal specimens are independent of diameter-to-length ratios. United States Dept. of the Interior, Bureau of Mines, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Peterman, Robert J. Evaluation of strand transfer and development lengths in pretensioned girders with semi-lightweight concrete. Purdue University, [Joint Transportation Research Program, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

M, Fisher Douglas, and Lewis Research Center, eds. Influence of fatigue crack wake length and state of stress and on crack closure. National Aeronautics and Space Administration, Lewis Research Center, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

U, Balachandran, Collings E. W, Goyal A, and Minerals, Metals and Materials Society., eds. Processing of long lengths of superconductors: Proceedings of the symposium on processing of long lengths of superconductors, held during Materials Week '93 in Pittsburg, Pennsylvania, October 17-21, 1993. Minerals, Metals & Materials Society, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Stroobandt, Dirk. A priori wire length estimates for digital design. Kluwer Academic Publishers, 2001.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Lengthy materials"

1

Wang, Xiangwen, M. Laframboise, and P. Gagnon. "Experience with Lengthy Pot Hibernation at Alcoa Baie-Comeau." In The Minerals, Metals & Materials Series. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-65396-5_56.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Ghatak, Kamakhya Prasad, and Sitangshu Bhattacharya. "DSL in Bulk Specimens of Non-Parabolic Materials." In Debye Screening Length. Springer International Publishing, 2013. http://dx.doi.org/10.1007/978-3-319-01339-8_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Das, Apurba. "Fibre Length." In Testing of Textile and Fibrous Materials. CRC Press, 2024. http://dx.doi.org/10.1201/9781003453642-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Moyo, Pilate, and Salathiel Mundeli. "Experimental and Numerical Investigation of Patch-Repaired and CFRP-Strengthened Beams." In Springer Proceedings in Materials. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-72955-3_40.

Full text
Abstract:
AbstractCarbon fibre reinforced polymers (CFRP) have emerged as an effective material for strengthening reinforced concrete structures. While many studies have been reported on CFRP strengthening of reinforced concrete elements subject to corrosion, there is a dearth of information on strengthening patch-repaired concrete elements. This paper reports on the experimental and numerical investigation of the behaviour of corrosion-damaged RC beams that have been patch repaired and strengthened with CFRP. Fifteen beams were cast; twelve of these were subjected to simulated corrosion of 5%, and the
APA, Harvard, Vancouver, ISO, and other styles
5

Wethal, Ulrikke. "Practices, Provision and Protest: Power Outages in Rural Norwegian Households." In Consumption, Sustainability and Everyday Life. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-11069-6_6.

Full text
Abstract:
AbstractElectricity plays a vital role in everyday life. However, electricity-dependent practices are often taken for granted, and the complex underlying infrastructure tends to be invisible—until power supply is disrupted. Drawing on qualitative interviews with rural Norwegian households, this chapter takes practices as the starting point for examining how daily life changes during power outages and how households experience the consequences of such outages. The aim is to use households’ perspectives to understand the consequences of power outages and show how disruption influences relations
APA, Harvard, Vancouver, ISO, and other styles
6

Luo, Dan, Joseph M. Gattas, and Poah Shiun Shawn Tan. "Real-Time Defect Recognition and Optimized Decision Making for Structural Timber Jointing." In Proceedings of the 2020 DigitalFUTURES. Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-33-4400-6_4.

Full text
Abstract:
AbstractNon-structural or out-of-grade timber framing material contains a large proportion of visual and natural defects. A common strategy to recover usable material from these timbers is the marking and removing of defects, with the generated intermediate lengths of clear wood then joined into a single piece of full-length structural timber. This paper presents a novel workflow that uses machine learning based image recognition and a computational decision-making algorithm to enhance the automation and efficiency of current defect identification and re-joining processes. The proposed workflo
APA, Harvard, Vancouver, ISO, and other styles
7

Lurie, Sergey, Petr Belov, and Holm Altenbach. "Classification of Gradient Adhesion Theories Across Length Scale." In Advanced Structured Materials. Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-31721-2_13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Forest, Samuel. "Micromorphic Approach to Materials with Internal Length." In Encyclopedia of Continuum Mechanics. Springer Berlin Heidelberg, 2018. http://dx.doi.org/10.1007/978-3-662-53605-6_150-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Forest, Samuel. "Micromorphic Approach to Materials with Internal Length." In Encyclopedia of Continuum Mechanics. Springer Berlin Heidelberg, 2020. http://dx.doi.org/10.1007/978-3-662-55771-6_150.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Benjwal, Poonam, and Kantesh Balani. "Multi-Length Scale Hierarchy in Natural Materials." In Biosurfaces. John Wiley & Sons, Inc, 2015. http://dx.doi.org/10.1002/9781118950623.ch5.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Lengthy materials"

1

Zielnik, Allen. "Test Method Development for Improved Laboratory Accelerated Weathering of High Performance Coatings." In SSPC 2013 Greencoat. SSPC, 2013. https://doi.org/10.5006/s2013-00078.

Full text
Abstract:
Abstract The use of accelerated laboratory artificial weathering in coatings development is necessitated by the lengthy times required for natural outdoor weathering. Across a broad range of industries, weathering results from materials exposed in subtropical South Florida have become the benchmark to which accelerated test methods are compared. To date, there is substantial inconsistency in correlations between the Florida and laboratory accelerated exposures. An industry consortium of coating OEMs, material suppliers, users and test houses has collaborated on developing a new accelerated tes
APA, Harvard, Vancouver, ISO, and other styles
2

Hickey, W. Fassett, John H. Macha, Brendy Rincon Troconis, Thomas Dobrowolski, and Wei Chen. "The Effects of Additive Manufacturing on the Hydrogen Embrittlement of Alloy 718." In CONFERENCE 2023. AMPP, 2023. https://doi.org/10.5006/c2023-19358.

Full text
Abstract:
Abstract Parts made via additive manufacturing (AM) are being adopted broadly among many industries and used in an array of applications. AM parts are attractive to these industries for several reasons. Complex geometries that otherwise cannot be manufactured using traditional methods can be printed. Also, the ability to use AM to produce parts mitigates the need to maintain an inventory of replacement parts and avoids lengthy delivery times. Alloy 718 is widely used in demanding applications due to its high strength at high temperatures and excellent creep and corrosion resistance. Parts and
APA, Harvard, Vancouver, ISO, and other styles
3

Schilling, Mark. "Coating Specifications – Great Expectations, or Plan 9 from Outer Space?" In SSPC 2000. SSPC, 2000. https://doi.org/10.5006/s2000-00041.

Full text
Abstract:
Coating specifications provide a set of instructions that detail the materials that may be used, the work that is to be done, what is to be achieved, and how the coating work is to be scrutinized for quality assurance purposes. The specification is the primary means in which the specification writer communicates what is to be accomplished. Contractors rely on this information to estimate, plan, and bid the work. Simple but incomplete coating specifications can create problems by leaving important issues to be argued and decided later, during the work. Complex and voluminous specifications with
APA, Harvard, Vancouver, ISO, and other styles
4

Ding, Yuan, and Raymundo Case. "A Novel Model to Assess Sulfide Stress Cracking (SSC) Susceptibility of Carbon Steels." In CORROSION 2021. AMPP, 2021. https://doi.org/10.5006/c2021-16326.

Full text
Abstract:
Abstract NACE TM0177 method D1 has long been the standard method for estimating SSC susceptibility of carbon steels by directly measuring KISCC. However, the lengthy experimental duration made the generated results unreliable especially in the low H2S concentration environments. Therefore, a novel approach based on J-integrals obtained from the notched tensile slow strain rate test (NTRRST) is established to provide a universal solution for SSC susceptibility evaluation. In the current research, the KISSC values of two different materials in air, C110 and P110, were evaluated using the new app
APA, Harvard, Vancouver, ISO, and other styles
5

Howard, Siv. "Effect of Stress Level on the SCC Behavior of Martensitic Stainless Steel During HT Exposure to Formate Brines." In CORROSION 2016. NACE International, 2016. https://doi.org/10.5006/c2016-07613.

Full text
Abstract:
Abstract Formate brines first entered into service as high performance High Pressure High Temperature (HPHT) drilling, completion, and workover fluids in the mid 90's. Over the years the range of applications has extended to include use as long-term HPHT well suspension fluids and HPHT well packer fluids. Throughout this time there have been no reported occurrences of Stress Corrosion Cracking (SCC) failures, despite lengthy exposures to acid gases under extreme hydrothermal conditions. This field experience, however, has unfortunately not always been replicated in the laboratory. For example
APA, Harvard, Vancouver, ISO, and other styles
6

Boaron, A., D. Stöbener, and A. Fischer. "P14 - Automatic Multisensory Measurement of the Borehole Length during Drilling of Inhomogeneous Materials." In SMSI 2025. AMA Service GmbH, Von-Münchhausen-Str. 49, 31515 Wunstorf, Germany, 2025. https://doi.org/10.5162/smsi2025/p14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Pauliat, G., A. Villing, J. C. Launay, and G. Roosen. "Direct measurements of charge carrier mobilities in photorefractive sillenite crystals." In Photorefractive Materials, Effects, and Devices II. Optica Publishing Group, 1990. http://dx.doi.org/10.1364/pmed.1990.a8.

Full text
Abstract:
The charge carrier mobility*recombination time product (μτ) is an important photorefractive parameter. In the band transport model [1], this product is one of the three crystal parameters (with Na the deep trap density and τdi the dielectric recombination time) which govern the kinetics of the photorefractive effect. Usual photorefractive measurements of μτ are lengthy and give uncertain results for some samples in which the band transport model is not detained enough to completly describe the photorefractive effect.
APA, Harvard, Vancouver, ISO, and other styles
8

Barua, B., V. T. Phan, M. C. Messner, B. Jetter, T. L. Sham, and Y. Wang. "Design Methodologies for High Temperature Reactor Structural Components Cladded With Noncompliant Materials." In ASME 2019 Pressure Vessels & Piping Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/pvp2019-93643.

Full text
Abstract:
Abstract The existing Class A metallic materials qualified for ASME Section III, Division 5 rules for high temperature nuclear reactors, are not optimized for corrosion resistance when exposed to corrosive reactor coolants such as molten salts, and molten lead and lead-bismuth eutectic. Introducing new corrosion-resistant materials into the Code would be a lengthy and expensive process for long design lifetimes, requiring long-term creep test data. A near-term alternative solution might be to allow designers to clad the existing Class A materials with thin layer of some corrosion-resistant mat
APA, Harvard, Vancouver, ISO, and other styles
9

Krizak, Troy, Onome Scott-Emuakpor, Philip Johnson, and Kiran D’Souza. "Novel Microturbine Engine Test Stand for Rapid Assessment of New Materials and Manufacturing Procedures." In ASME Turbo Expo 2024: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2024. http://dx.doi.org/10.1115/gt2024-125114.

Full text
Abstract:
Abstract New materials and advanced manufacturing techniques are essential for creating more effective, efficient, and innovative turbomachinery systems. The current process for developing these new components has many lengthy and costly steps, which slows the adoption of new designs and materials. This work outlines a new, easy to assemble and operate microturbine engine test stand that will allow for rapid testing of new turbomachinery component prototypes, materials, and manufacturing techniques. The goal for this test stand is to allow for quick proof of concept testing that can then be us
APA, Harvard, Vancouver, ISO, and other styles
10

Abuorf, Hazem, and Sulaiman Wafi. "Mortar to Repair Rammed-Earth Walls’ Surfaces: Do we still Need it?" In 4th International Conference on Bio-Based Building Materials. Trans Tech Publications Ltd, 2022. http://dx.doi.org/10.4028/www.scientific.net/cta.1.825.

Full text
Abstract:
A rammed-earth technique has been echoed worldwide due to being conceived not only as an environment-friendly method of construction but also standing as an alternative method to arguably replacing cement. The technique however shows several pitfalls. One concerns the lengthy process of curing upon erecting the rammed-earth walls due to the low process of a chemical reaction occurred throughout the curing stage. A second bias followed from the slow curing and concerns the degradation accentuated at the outer wall’s texture, particularly at the edges, due to effects of the weather cycle. These
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Lengthy materials"

1

Hayford. L51566 Ultralow Frequency Eddy Current Instrument for the Detection and Sizing of Stress Corrosion Cracks. Pipeline Research Council International, Inc. (PRCI), 1988. http://dx.doi.org/10.55274/r0010601.

Full text
Abstract:
Eddy current testing has received only limited application to ferrous materials because the high permeability of the material in combination with the normally high frequency of the eddy current instrument results in a very small depth of penetration of the eddy currents into the material. The objectives of this research program were threefold. The first goal was to develop an eddy current instrument with frequencies low enough to penetrate pipeline steel. The second was to use the new instrument to develop techniques for locating stress corrosion cracks (SCC) on coated pipelines without requir
APA, Harvard, Vancouver, ISO, and other styles
2

Thompson and Lawson. NR199307 Pipe Database and Pipe Sample Storage Program. Pipeline Research Council International, Inc. (PRCI), 1993. http://dx.doi.org/10.55274/r0011231.

Full text
Abstract:
�The report provides a compilation of data generated on Project NG-18 that has been developed over a number of years. This report consists of two topics: one is a summary of the pipe properties developed for pipe materials used in Project NG-18; a pipe sample storage program that has been initiated to set aside samples of virgin pipe material so that when future problems develop on pipelines, original pipe materials will be available for the conduct of research. Pipe properties from over 400 pipe lengths is contained in the pipe database. This database focuses on pipe diameters from 8 inches t
APA, Harvard, Vancouver, ISO, and other styles
3

Grujicic, Mica. Multi-length Scale Material Model Development for Armorgrade Composites. Defense Technical Information Center, 2014. http://dx.doi.org/10.21236/ada605327.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Flottorp, Signe. Do continuing education meetings and workshops for healthcare professionals improve professional practice and healthcare outcomes? SUPPORT, 2016. http://dx.doi.org/10.30846/160809.

Full text
Abstract:
An important aim of continuing education for healthcare professionals is to improve professional practice so that patients can receive improved healthcare. Educational meetings and printed educational materials are the most common types of continuing education for health professionals. Educational meetings include lectures, workshops and courses. The meetings can be highly variable in terms of content, number of participants, the degree and type of interaction, length and frequency.
APA, Harvard, Vancouver, ISO, and other styles
5

Zabaras, Nicholas. Robust Multi-Length Scale Deformation Process Design for the Control of Microstructure-Sensitive Material Properties. Defense Technical Information Center, 2007. http://dx.doi.org/10.21236/ada472450.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

OKAY, ERHAN, KORHAN OZKAN, Keith Baldwin, Alexandre Arkader, and Souroush Baghdadi. The clinical outcomes and current evidence in the surgical treatment of extremity-located fibrous dysplasia. INPLASY - International Platform of Registered Systematic Review and Meta-analysis Protocols, 2023. http://dx.doi.org/10.37766/inplasy2023.5.0020.

Full text
Abstract:
Review question / Objective: What are clinical outcomes and current evidence in the surgical treatment of extremity-located fibrous dysplasia? Condition being studied: Fibrous dysplasia is the fibro-osseous lesion of tissue where normal bone tissue is replaced by collagen fibroblast and varying amounts of osteoid cells which is caused by GNAS gene mutation. Surgery aims to correct deformities and avoid limb length discrepancies in symptomatic cases. Available options include curettage, grafting, corrective osteotomies, and using fixation materials. There is a need for an optimal surgical treat
APA, Harvard, Vancouver, ISO, and other styles
7

Briggs, Nicholas E., Robert Bailey Bond, and Jerome F. Hajjar. Cyclic Behavior of Steel Headed Stud Anchors in Concrete-filled Steel Deck Diaphragms through Push-out Tests. Northeastern University. Department of Civil and Environmental Engineering., 2023. http://dx.doi.org/10.17760/d20476962.

Full text
Abstract:
Earthquake disasters in the United States account for $6.1 billion of economic losses each year, much of which is directly linked to infrastructure damage. These natural disasters are unpredictable and represent one of the most difficult design problems in regard to constructing resilient infrastructure. Structural floor and roof diaphragms act as the horizontal portion of the lateral force resisting system (LFRS), distributing the seismically derived inertial loads out from the heavy concrete slabs to the vertical LFRS. Composite concrete-filled steel deck floor and roof diaphragms are ubiqui
APA, Harvard, Vancouver, ISO, and other styles
8

Graville, B. A. L51707 Factors Affecting Heat Affected Zone Root Strains in Pipeline Girth Welds and Repairs. Pipeline Research Council International, Inc. (PRCI), 1993. http://dx.doi.org/10.55274/r0010219.

Full text
Abstract:
A previous study on hydrogen cracking in the heat affected zone of pipeline girth welds and repairs found that large strains in the HAZ transverse to the weld played a major role in causing cracking. Large transverse strains were believed to arise from bending of the weld due to the thermal contraction of the weld around the pipe circumference. Large root strains were simulated in the laboratory using a bend test which enabled the effect of material composition and strength to be studied. In the bend test, the specimen deflection at the onset of cracking, indicated by a drop in load, was used
APA, Harvard, Vancouver, ISO, and other styles
9

Miller, Nathan. A Micromorphic Length-Scale Coupling Framework for the Determination of Higher-Order Constitutive Models and the Multi-Scale Simulation of Heterogeneous Materials. Office of Scientific and Technical Information (OSTI), 2022. http://dx.doi.org/10.2172/1864979.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Andrews. L51847 Fatigue Strength of Seamless Line Pipe and Modern ERW Line Pipe. Pipeline Research Council International, Inc. (PRCI), 2001. http://dx.doi.org/10.55274/r0010430.

Full text
Abstract:
To resolve the question as to whether or not ERW pipe might prove inferior to seamless pipe in terms of resistance to cyclic stresses, the PRCI member companies decided to fund the project described herein to assess the performance of ERW pipe versus seamless pipe. Presented herein are the results of a research project on the serviceability of seamless line pipe and modern high-frequency-welded ERW (electric-resistance-welded) line pipe. Full-scale samples of both kinds of pipe were subjected in a laboratory environment to pressure cycles simulating hundreds of years of service. Four samples o
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Lengthy materials' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography