To see the other types of publications on this topic, follow the link: Limiting Amplifier.

Dissertations / Theses on the topic 'Limiting Amplifier'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 19 dissertations / theses for your research on the topic 'Limiting Amplifier.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Neethling, M. (Marthinus). "A broadband microwave limiting amplifier." Thesis, Stellenbosch : University of Stellenbosch, 2004. http://hdl.handle.net/10019.1/16406.

Full text
Abstract:
Thesis (MScIng)--University of Stellenbosch, 2004.<br>ENGLISH ABSTRACT: Limiting amplifiers are employed in electronic warfare (EW) systems requiring a high measure of amplitude control. These EW systems employ sensitive signal processing components that are unable to accept the full dynamic range of input signals the system must face. The limiting amplifier, however, offers the unique capability of reducing the received signal spectrum to a suitable dynamic range. A typical application of the limiting amplifier is in the instantaneous frequency measurement (IFM) receiver where the limitin
APA, Harvard, Vancouver, ISO, and other styles
2

Kilic, Hasan Huseyin. "Design And Fabrication Of A High Gain, Broadband Microwave Limiting Amplifier Module." Master's thesis, METU, 2011. http://etd.lib.metu.edu.tr/upload/12613616/index.pdf.

Full text
Abstract:
Microwave limiting amplifiers are the key components of Instantaneous Frequency Measurement (IFM) systems. Limiting amplifiers provide constant output power level in a wide input dynamic range and over a broad frequency band. Moreover, limiting amplifiers are high gain devices that are used to bring very low input power levels to a constant output power level. Besides, limiting amplifiers are required to provide minimum small signal gain ripple in order not to reduce the sensitivity of the IFM system over the operating frequency band. In this thesis work, a high gain, medium power, 2-18 GHz l
APA, Harvard, Vancouver, ISO, and other styles
3

Calvo, Carlos Roberto. "A 2.5 GHz Optoelectronic Amplifier in 0.18 m CMOS." Digital WPI, 2003. https://digitalcommons.wpi.edu/etd-theses/257.

Full text
Abstract:
The ever-growing need for high speed data transmission is driven by multimedia and telecommunication demands. Traditional metallic media, such as copper coaxial cable, prove to be a limiting factor for high speed communications. Fiber optic methods provide a feasible solution that lacks the limitations of metallic mediums, including low bandwidth, cross talk caused by magnetic induction, and susceptibility to static and RF interferences. The first scientists to work with fibers optics started in 1970. One of the early challenges they faced was to produce glass fiber that was pure enough to be
APA, Harvard, Vancouver, ISO, and other styles
4

Cove, Stephen E. "A 10 gigabit per second limiting amplifier with 40dB gain and 7 GHz bandwidth for SONET OC-192 applications." [Gainesville, Fla.] : University of Florida, 2005. http://purl.fcla.edu/fcla/etd/UFE0009921.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Bibi, Nargis. "Mitigating the effect of soft-limiting for OFDM peak reduction." Thesis, University of Manchester, 2014. https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.618002.

Full text
Abstract:
Digital communication systems which use Orthogonal Frequency Division Multiplexing (OFDM) are now widely used and have many advantages. The main disadvantage is the requirement for highly linear analogue electronics including the high power amplifier (HPA). This requirement cannot be met in all circumstances because of the occurrence of symbols with high peak to average power ratio (PAPR). Such symbols may be non-linearly distorted by limiting. Approaches to solve this problem have been either to reduce the PAPR at the transmitter or to try to mitigate the effect of the non-linearity at the re
APA, Harvard, Vancouver, ISO, and other styles
6

Ochoa, Castillo Sergio Pablo. "Diseño de un amplificador limitador cmos para velocidades en tecnologías submicrónicas." Bachelor's thesis, Universidad Ricardo Palma, 2018. http://cybertesis.urp.edu.pe/handle/urp/1356.

Full text
Abstract:
Este informe técnico propone el diseño de un bloque llamado Amplificador Limitador que se encuentra en los equipos que trabajan con fibra óptica o con altas tasas de transmision de datos y que estan integrados en una pastilla de silicio. El objetivo principal es aumentar el ancho de banda de un Amplificador Limitador mediante la aplicación de la técnica Inductive Peaking para lograr velocidades que corresponden a una portadora óptica OC-192 equivalente a 10 Gbps bajo el estándar SONET. Haciendo uso de tecnología CMOS con transistores de 130 nm de ancho de canal. A su vez se propone disminu
APA, Harvard, Vancouver, ISO, and other styles
7

Chen, Li-Chan, and 陳林謙. "A 2V , 110MHz CMOS limiting amplifier." Thesis, 1997. http://ndltd.ncl.edu.tw/handle/26644608797311719577.

Full text
Abstract:
碩士<br>國立交通大學<br>電子工程學系<br>85<br>This thesis describes the design of a 2~V, 110 MHz CMOS limiting amplifier, which consists of a gain stage, a offset canceling circuit, a received signal strength indicator( RSSI), and a winding-swing constant-transconductance bias circuit. The key component is the gain stage which cascode eight the same gain cells, called core cell. Under the other circuits' help, every transistor in the core cell can always keep const
APA, Harvard, Vancouver, ISO, and other styles
8

Kuo, shing-chung, and 郭勝昌. "CMOS Limiting Amplifier for SONET OC-3." Thesis, 1994. http://ndltd.ncl.edu.tw/handle/14210538027400804941.

Full text
Abstract:
碩士<br>國立中央大學<br>電機工程研究所<br>83<br>A limiting amplifier for SONET OC-3 is designed and laid out by using UMC 0.8um DPDM 5V CMOS technology. The limiting amplifier has an access time of 7.5ns and an input dynamic ra- nge of 50dB.
APA, Harvard, Vancouver, ISO, and other styles
9

McLeod, Scott. "Limiting amplifier offset compensation in 65-nm CMOS." 2009. http://link.library.utoronto.ca/eir/EIRdetail.cfm?Resources__ID=958029&T=F.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

劉金慰. "Design of a Limiting Amplifier for Optional Communications Receiver." Thesis, 2008. http://ndltd.ncl.edu.tw/handle/21115303859911795499.

Full text
Abstract:
碩士<br>明新科技大學<br>電子工程研究所<br>96<br>In this thesis, we use TSMC 0.35μm SiGe BiCMOS technology to design and implement a practical limiting amplifier gain post-amplifier circuit. Limiting amplifier is the back-end component of the optical communication receiver, the main purpose designs for obtains the high gain and the high dynamic-range as well as the good stability. The other purpose is high sensitivity to enlarge the small signal which from front-end transimpedance amplifier to the stabilized amplitude output. We designs the limiting amplifier consists with four stages, the circuits were l
APA, Harvard, Vancouver, ISO, and other styles
11

Wu, Junsheng, and 吳濬聖. "Limiting Amplifier Topology Analysis of Radio Frequency Power Detection." Thesis, 2011. http://ndltd.ncl.edu.tw/handle/69573420543719712109.

Full text
Abstract:
碩士<br>國立中正大學<br>電機工程研究所<br>99<br>A research of radio frequency power detector for wideband operation is studied with a successive detection logarithmic amplifier (SDLA) topology and then we fabricate the related designs by TSMC 1P6M 0.18-μm. SDLA composes of limiting amplifier, unbalanced source-coupled differential pairs and low-pass filter. In order to increase the operating frequency, three types of limiting amplifiers will be analyzed. First, an active inductor topology is used to increase the 3-dB bandwidth of common source differential pair with body bias. The results show that the appli
APA, Harvard, Vancouver, ISO, and other styles
12

Leitão, Renata Santos. "Design of a Limiting Amplifier for an Optical Receiver." Master's thesis, 2018. http://hdl.handle.net/10362/74921.

Full text
Abstract:
The HEP experiments that take place at CERN’s LHC demand a multi-gigabit optical link for an efficient transmission of the resulting generated data. An optoelectronic link arises as the best solution given its possibility of working at high data rates and due to fiber’s imunnity to electromagnetic noise. The design of this optical link is particularly demanding due to the stringent data rate specifications (5Gb/s), the BER specification (10􀀀12) and the constraints imposed by radiation. In HEP, radiation is always a constraint so, the Optical Receiver circuit must be hardened in order to
APA, Harvard, Vancouver, ISO, and other styles
13

Wu, Chen-Chang, and 吳承昌. "Design of Limiting Amplifier and FM Demodulator for Bluetooth System." Thesis, 2002. http://ndltd.ncl.edu.tw/handle/79908214947893699552.

Full text
Abstract:
碩士<br>國立交通大學<br>電資學院學程碩士班<br>90<br>Limiting amplifier and FM demodulator is an essential component in front-end circuit for wireless communications. It converts the IF signal to an appropriate voltage level from mixer and bandpass filter to the baseband DSP. Gain, phase error ,input voltage offset canceling and received signal strength indicator are the most important parameters in limiting amplifier design. In this thesis, we will present the structure of low-IF Bluetooth receiver. Analysis of the gain, phase error , input voltage offset canceling and receive signal strength indicator of the
APA, Harvard, Vancouver, ISO, and other styles
14

Liu, Ping-Cheng, and 劉秉澄. "The Design of High Performance SiGe Limiting Amplifier for 10Gb/s Application." Thesis, 2007. http://ndltd.ncl.edu.tw/handle/26090705294878311083.

Full text
Abstract:
碩士<br>國立清華大學<br>電子工程研究所<br>95<br>Along with the improvement of technology, people start to realize the importance and need of high data rate transfer, the Optical Fiber Communication provides the property of high bandwidth interface and has no weakness of Electric Telecommunications interface, and therefore, the Optical Fiber Communication System plays an important role for the public nowadays. However, at present, integrated Photo Detector and TIA/LA into the same chip from Optical receivers still have many problems no matter for the academia or technology industry. Among them, the biggest c
APA, Harvard, Vancouver, ISO, and other styles
15

Ye, Ding-Xiu, and 葉定修. "Chip Implementation of High Speed Low Voltage Limiting-Filtering Amplifier and Received Singal Strengh Indicator Circuits." Thesis, 1997. http://ndltd.ncl.edu.tw/handle/76543745024769274530.

Full text
Abstract:
碩士<br>淡江大學<br>電機工程學系<br>85<br>The low voltage IF (intermediate-frequency) limiting amplifier and received signal strenght indicator (RSSI) are widely used the FM modulation in communication systems. The main functions are amplification and limitation signal and measuring received signal strength. There are several IC's products realizing limiting amplifier and RSSI in bipolar technologies. Here we want to implement the low voltage IF limiting amplifier and received signal strength with CMOS technology. The differential amplifier and full wave rectifier circuit were adopted in this circuit.
APA, Harvard, Vancouver, ISO, and other styles
16

Wei, Liao Jieh, and 廖介偉. "CMOS Limiting Amplifiers." Thesis, 2003. http://ndltd.ncl.edu.tw/handle/90065034680663127279.

Full text
Abstract:
碩士<br>國立臺灣大學<br>電子工程學研究所<br>91<br>The exponential growth of data in telecommunication networks has rekindled interest in high-speed optical and electric device and systems. The majority of the backbone optical communication systems are based on the SONET standard. In this system, optical data can be transmitted via differential lengths of fiber. At the receiving end, these differential transmission paths result in a large attenuation range of optical signal. How to maintain a constant magnitude for the succeeding electrical interfaces, namely, timing recovery and data regeneration, is the key
APA, Harvard, Vancouver, ISO, and other styles
17

Wu, Feng-Zhu, and 吳豐竹. "Design of 10 Gb/s CMOS Limiting Amplifiers." Thesis, 2013. http://ndltd.ncl.edu.tw/handle/22346900643000226930.

Full text
Abstract:
碩士<br>國立高雄應用科技大學<br>電子工程系碩士班<br>101<br>In this thesis, we design a limiting amplifier with interleaving active feedback and a limiting amplifier with multiple active feedback. The two chips are implemented in the TSMC 0.18μm CMOS technology. Our circuits are designed with differential inputs and differential outputs. The first limiting amplifier with interleaving active feedback includes the DC offset cancellation circuit, an output buffer with a transition frequency doubler, and an active inductors at the output ends. The voltage gain of this chip is 39 dB, its bandwidth is 10 GHz, its po
APA, Harvard, Vancouver, ISO, and other styles
18

Lin, Chien-Hsing, and 林健興. "Design of a Loss-of-Signal Detector in Limiting Amplifiers." Thesis, 2008. http://ndltd.ncl.edu.tw/handle/88366011957710121442.

Full text
Abstract:
碩士<br>明新科技大學<br>電子工程研究所<br>96<br>The paper have designed the Loss of signal (LOS) Detector circuit which applies Limiting amplifier in the optical communication field. The device is used the TSMC 0.35μm technology for simulated and designed. The LOS circuit is implemented by three part which is Root Means Square (RMS), Comparator and Output Buffer. The First stage of LOS is a root mean square detector (RMS) which is implemented by rectifier and low pass filter. The circuit which transforms a AC signal to DC signal is based on one differential amplifier and a rectifier filter. The output signal
APA, Harvard, Vancouver, ISO, and other styles
19

Chen, Yen-Yang, and 陳彥揚. "Design and Analysis of 2.5 Gbps 0.35 um CMOS Limiting Amplifiers." Thesis, 2009. http://ndltd.ncl.edu.tw/handle/40077488084282125251.

Full text
Abstract:
碩士<br>國立高雄應用科技大學<br>電子工程系<br>97<br>In this thesis, the characteristics of limiting amplifiers (LA) used in optical receivers are investigated. We use the enhanced Cherry-Hooper amplifiers to improve gain and bandwidth of the limiting amplifier. The parameters of the gain cell circuit are optimized, and our LA are designed using a series of the gain cells. Because the DC offset is small in our LA, the DC offset cancellation circuit could not be necessary and the area of layout can be reduced. The characteristics of several gain cell circuits are studied by simulations
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!