Relevant bibliographies by topics / Linear wear

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Linear wear'

Author: Grafiati
Published: 28 May 2022
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Linear wear.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Linear wear"

1

Kim, Dongwook, Luca Quagliato, Donghwi Park, Mohanraj Murugesan, Naksoo Kim, and Seokmoo Hong. "Wear-caused deflection evolution of a slide rail, considering linear and non-linear wear models." Journal of Physics: Conference Series 843 (May 2017): 012068. http://dx.doi.org/10.1088/1742-6596/843/1/012068.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Ran, Hongliang, Shaoping Wang, and Di Liu. "A multiscale wear model for reciprocating rod stepseal under mixed lubricating conditions based on linear elasticity." Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 235, no. 1 (2020): 161–80. http://dx.doi.org/10.1177/1350650120902602.

Full text
Abstract:
The macroscale simulation methods are commonly used to study the wear of reciprocating seals to analyze macroscopic effects on the seal wear. There is a lack of numerical method for analyzing the wear of reciprocating seal under mixed lubricating conditions. According to experimental studies, some microscopic factors, including lubrication characteristics and surface roughness, are important for wear of reciprocating seal. Hence, in the presented research, a numerical model is proposed to analyze the effects of microscopic factors on reciprocating rod stepseal wear. O-ring of the stepseal is c
APA, Harvard, Vancouver, ISO, and other styles
3

Wang, Xiao-Yi, Chang-guang Zhou, and Yi Ou. "Experimental analysis of the wear coefficient for the rolling linear guide." Advances in Mechanical Engineering 11, no. 1 (2019): 168781401882174. http://dx.doi.org/10.1177/1687814018821744.

Full text
Abstract:
With the development of rolling linear guide manufacturing, improvements of performance and reliability of rolling linear guide products have become the critical technical challenge. One of the key-points lies in the analysis of wear process, in which the crucial step depends on the computation of the wear coefficient. However, little attention has been devoted to the wear coefficient of rolling linear guide. Therefore, in this article, to reflect the actual working condition of rolling linear guide, a novel calculation model for the wear coefficient of rolling linear guide is established firs
APA, Harvard, Vancouver, ISO, and other styles
4

Anisimov, Volodymyr Mykolajovych, Anton Panda, Volodymyr Volodymyrovych Anisimov, Konstantin Dyadyura, and Iveta Pandova. "ABOUT WEAR RESISTANCE OF LINEAR BLOCK-POLYURETHANES." MM Science Journal 2020, no. 4 (2020): 4068–73. http://dx.doi.org/10.17973/mmsj.2020_11_2020024.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Anisimov, Volodymyr, and Volodymyr V. Anisimov. "Regulation Features of Structure of Linear Block-Copolyurethane Composites of High Wear Resistance." Chemistry & Chemical Technology 15, no. 1 (2021): 33–39. http://dx.doi.org/10.23939/chcht15.01.033.

Full text
Abstract:
The influence of the main structural parameters (molecular weight and hard blocks content) as well as methods of filling linear block-polyurethanes and their compositions on their strength, deformation, rheological and tribotechnical characteristics has been studied. A complex approach to produce polyurethane compositions of improved wear resistance has been suggested.
APA, Harvard, Vancouver, ISO, and other styles
6

Tikalov, A. V., L. V. Efremov, and S. G. Chulkin. "Improvement of the method for testing the wear resistance of friction pairs with variable specific pressure." Transactions of the Krylov State Research Centre S-I, no. 1 (2021): 322–24. http://dx.doi.org/10.24937/2542-2324-2021-1-s-i-322-324.

Full text
Abstract:
The article is devoted to improving the method of testing the wear resistance of “block-on-ring” friction pairs. Simplified formulas for estimating linear and volumetric wear resistance based on decomposition into a Taylor series of geometric functions are proved. Particular attention is paid to the justification of linear wear based on the equivalence of the results in the calculation of volume wear. The dependence of volumetric wear resistance on linear resistance through specific pressure is proved. As a test of the proposed procedure, field tests of a number of materials of different hardn
APA, Harvard, Vancouver, ISO, and other styles
7

Elke, Reinhard, and Claude B. Rieker. "Estimating the osteolysis-free life of a total hip prosthesis depending on the linear wear rate and head size." Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 232, no. 8 (2018): 753–58. http://dx.doi.org/10.1177/0954411918784982.

Full text
Abstract:
We present a model to estimate the osteolysis-free life of total hip arthroplasty, depending on linear wear rate and femoral head size. An estimate of the radiologic osteolysis threshold was calculated, which was based on volumetric wear. The osteolysis-free life of the cup was estimated from the quotient of the osteolysis threshold and volumetric wear rate, which was calculated from the linear wear rate. The impact of the direction of linear wear was determined by sensitivity analysis. From our review, we calculated a weighted mean polyethylene volume of approximately 670 mm3 as osteolysis th
APA, Harvard, Vancouver, ISO, and other styles
8

Tao, Weijun, Yang Zhong, Hutian Feng, and Yulin Wang. "Model for wear prediction of roller linear guides." Wear 305, no. 1-2 (2013): 260–66. http://dx.doi.org/10.1016/j.wear.2013.01.047.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Ozcelik, Y. "Estimation of wear rate on diamond beads during cutting with diamond wire by using multiple linear regression techniques." Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 225, no. 7 (2011): 1537–49. http://dx.doi.org/10.1177/0954406211400692.

Full text
Abstract:
The effects of mechanical, textural, and compositional properties of rocks on the bead wear during the cutting operation of marble blocks were evaluated in depth by multivariate statistical methods in this study. Moreover, the concept of texture coefficient (TC), which is a result of textural rock properties, was investigated and the effect of the textural coefficient on the marble and limestone cutting with diamond wire was examined. During the investigation, using statistical software called SPSS 10.0, stepwise multiple linear regression models of the wear rate for limestone and marble were
APA, Harvard, Vancouver, ISO, and other styles
10

Tao, Ping Jun, Yuan Zheng Yang, Xiao Jun Bai, Qiang Ru, and Zhi Wei Xie. "Effect of Load on Linear Reciprocating Sliding Friction and Wear Behavior in Zr-Based Bulk Metallic Glass." Advanced Materials Research 152-153 (October 2010): 1905–8. http://dx.doi.org/10.4028/www.scientific.net/amr.152-153.1905.

Full text
Abstract:
The effect of load on linear reciprocating sliding friction and wear behavior in a Zr55Cu30Ni5Al10 bulk metallic glass was investigated. With increasing load, the average friction coefficient descends, while the grinding trace width increases. The grinding traces exhibit smooth linear furrows. The larger the load is, the more serious the wear extent exhibits. Under smaller loads, the wear mechanism inclines to a combined result of slight bite or bite welding and continuous wear. While with the increase of load, the wear mechanism changes gradually to the combined effects of continuous wear, oc
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Linear wear"

1

Kolesnichenko, V. G., A. V. Ragulya, V. T. Varchenko, O. B. Zgalat-Lozynskyy, and M. Herrmann. "Wear-Resistant TiN – Si3N4 Nanocomposites Consolidated By Electric Discharge Sintering." Thesis, Sumy State University, 2012. http://essuir.sumdu.edu.ua/handle/123456789/35093.

Full text
Abstract:
Dense nanocomposites on the basis of silicon nitride with the size of structural elements less than 150 nm have been consolidated by Electric Discharge Sintering. The improvement of materials properties is expected: wearproofness, fracture toughness (~ 5 – 6 MPa м1/2), hardness (~ 22 GPа), bend stress (800- 1100 MPа), stability to the aggressive environments (acids at a room and high temperatures) as compared to traditional materials which now use as frictional unit. When you are citing the document, use the following link http://essuir.sumdu.edu.ua/handle/123456789/35093
APA, Harvard, Vancouver, ISO, and other styles
2

Sfantos, Georgios. "Boundary element methods for cohesive-frictional non linear problems : applications to wear, contact and multi-scale damage modelling." Thesis, Imperial College London, 2006. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.439265.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Postal, Germano Tagliari. "Projeto e fabricação de microtribômetro para análise de juntas soldadas." reponame:Biblioteca Digital de Teses e Dissertações da UFRGS, 2018. http://hdl.handle.net/10183/179571.

Full text
Abstract:
Este trabalho apresenta o desenvolvimento de um microtribômetro linear, do tipo esfera sobre chapa, capaz de analisar o comportamento tribológico de materiais em linhas até 5 mm de comprimento, frequências de até 2 Hz e cargas até 10 N, com ou sem meio úmido, características que o tornam uma ótima ferramenta para observar o comportamento tribológico, ou a resistência ao desgaste de diferentes zonas de uma junta soldada. Durante o projeto do microtribômetro, houve a preocupação de desenvolver um equipamento seguro, fácil de operar e robusto, visando a utilização do mesmo por alunos de graduação
APA, Harvard, Vancouver, ISO, and other styles
4

OLIVEIRA, DENISE DE. "WEAK STABILITY FOR INFINITE DIMENSIONAL LINEAR SYSTEMS." PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 1990. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=9384@1.

Full text
Abstract:
CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICO<br>O objetivo deste trabalho é o estudo das condições para a estabilidade de sistemas lineares discretos de dimensão infinita invariantes no tempo, evoluindo em um espaço de Hilbert. Apresentaremos uma vasta coleção de resultados sobre estabilidade assintótica uniforme, incluindo uma condição espectral equivalente. Em relação à estabilidade assintótica fraca, analisaremos tanto a dificuldade de se estabelecer uma condição necessária e suficiente sobre o espectro do operador, como também sua relação com similaridade a contra
APA, Harvard, Vancouver, ISO, and other styles
5

Curtis, Kedric W. "Size Scale Effects on Linear Weir Hydraulics." DigitalCommons@USU, 2016. https://digitalcommons.usu.edu/etd/5046.

Full text
Abstract:
Linear weirs are a common hydraulic structure that have been used for centuries with many different applications. One characteristic of weirs that is particularly useful is the head-discharge relationship where the discharge over the weir is directly related to the upstream water depth above the crest. In general, the head-discharge relationship for a weir is determined experimentally in laboratories using geometrically similar models. Due to space, time, money, and discharge capacity limitations at water laboratories, creating full scale models is not always a feasible option when determining
APA, Harvard, Vancouver, ISO, and other styles
6

Silva, Fernando Nunes da. "Desgaste corrosivo-cavitativo-erosivo de um a?o-carbono em meio aquoso com fra??es de sal (NaCl), CO2 e particulados s?lidos (SiO2)." Universidade Federal do Rio Grande do Norte, 2012. http://repositorio.ufrn.br:8080/jspui/handle/123456789/15699.

Full text
Abstract:
Made available in DSpace on 2014-12-17T14:58:19Z (GMT). No. of bitstreams: 1 FernandoNS_DISSERT.pdf: 5044327 bytes, checksum: 66e88407297dda873c6a6d882b6de312 (MD5) Previous issue date: 2012-08-27<br>Conselho Nacional de Desenvolvimento Cient?fico e Tecnol?gico<br>A batch of eighty-four coupons of low carbon steel were investigated at laboratory conditions under a corrosive, cavitative-corrosive (CO2) and corrosive-erosive (SiO2 + CO2) in an aqueous salt solution and two levels of temperature. The following measurements were made on Vickers (HV0,05, HV0,10, HV0,20) Microhardness tests at thr
APA, Harvard, Vancouver, ISO, and other styles
7

Moshgbar, Mojgan. "Prediction and real-time compensation of liner wear in cone crushers." Thesis, Loughborough University, 1996. https://dspace.lboro.ac.uk/2134/27362.

Full text
Abstract:
In the comminution industry, cone crushers are widely used for secondary and subsequent stages of size reduction. For a given crusher, the achieved size reduction is governed by the closed-side setting. Hadfield Steel is commonly used to line the crushing members to minimize wear. Yet, liner wear caused by some rock types can still be excessive. Enlargement of discharge opening induced by wear of liners produces a drift in product size which, if unchecked, can lead to high volumes of re-circulating load. Alteration of closed-side setting is now commonly achieved via hydraulic means. However, c
APA, Harvard, Vancouver, ISO, and other styles
8

Akroush, Muftah Emhemed. "Optimal Linear Filtering For Weak Target Detection in Radio Frequency Tomography." University of Dayton / OhioLINK, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=dayton158273299902246.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Blecha, Martin. "Návrh testovacího zařízení pro test opotřebení axiálních kloubů řízení." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-382264.

Full text
Abstract:
This diploma thesis deals with the design of several variants of test rig for tests of axial ball joints of passenger cars. The individual design variants are evaluated based on the evaluation matrix and then the best option is selected. Selected proposal includes a complete design including 3D models and strength analyses that focus on the most stressed construction nodes. These design nodes are solved using the finite element method. Hydraulics and hydraulic elements are equipped by the existing equipment from a test lab. At the end of this thesis is solved risk analysis of the new construct
APA, Harvard, Vancouver, ISO, and other styles
10

Armand, Marc Andre. "Contributions to the decoding of linear codes over a Galois ring." Thesis, University of Bristol, 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.297851.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Linear wear"

1

Butler, David Lee. The topographic characterisation of cylinder liner wear. University of Birmingham, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

O'Meara, Kevin C. Advanced topics in linear algebra: Weaving matrix problems through the Weyr Form. Oxford University Press, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Aganović, Zijad. Linear optimal control of bilinear systems: With applications to singular perturbations and weak coupling. Springer, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

United States. National Aeronautics and Space Administration., ed. Test method to evaluate cylinder liner-piston ring coatings for advanced heat engines. National Aeronautics and Space Administration, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

United States. National Aeronautics and Space Administration., ed. Test method to evaluate cylinder liner-piston ring coatings for advanced heat engines. National Aeronautics and Space Administration, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Xu, Da Quan. Numerical simulation of weak blast waves in air using a linear analysis. [s.n.], 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Aganović, Zijad, and Zoran Gajić, eds. Linear Optimal Control of Bilinear Systems with Applications to Singular Perturbations and Weak Coupling. Springer Berlin Heidelberg, 1995. http://dx.doi.org/10.1007/3-540-19976-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Kubancev, Viktor, Mihail Trachevskiy, Boris Farmakovskiy, and Vladislav Puschanskiy. Processes of thermal diffusion and hardening of metals in an alternating electromagnetic field. INFRA-M Academic Publishing LLC., 2024. https://doi.org/10.12737/2048109.

Full text
Abstract:
The monograph deals with the formation of corrosion- and wear-resistant high-strength protective coatings of metal products by the method of thermal diffusion of metals in an electromagnetic field. Special attention is paid to the physical nature of electromagnetic forces in AC inductors and the quantitative assessment of the effect of these forces on the deformation of the crystal lattice of the protected metal and the rate of diffusion of the applied ingredients into the metal. The results of an experimental study of the processes of thermal diffusion and hardening of metals in an alternatin
APA, Harvard, Vancouver, ISO, and other styles
9

Dacorogna, B. Weak Continuity and Weak Lower Semicontinuity of Non-Linear Functionals. Springer London, Limited, 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Vinsonhaler, Charles, Clark John, and Kevin O'Meara. Advanced Topics in Linear Algebra: Weaving Matrix Problems Through the Weyr Form. Oxford University Press, Incorporated, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Linear wear"

1

Meeß, Rudolf, and Frank Löffler. "Design and Evaluation of a Rolling Friction Apparatus for Micro Linear Bearings." In Friction, Wear and Wear Protection. Wiley-VCH Verlag GmbH & Co. KGaA, 2011. http://dx.doi.org/10.1002/9783527628513.ch58.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Diana, G., F. Cheli, A. Manenti, and F. Petrone. "Non Linear Effects in Lubricated Bearings." In Vibration and Wear in High Speed Rotating Machinery. Springer Netherlands, 1990. http://dx.doi.org/10.1007/978-94-009-1914-3_33.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Sheikh, Anwar Khalil, Syed Javed Hussain, and Munir Ahmad. "Cutting Tool Reliability and Machining Economics when Tool Wear Follows a Linear Nonstationary Random Wear Process." In Toward the Factory of the Future. Springer Berlin Heidelberg, 1985. http://dx.doi.org/10.1007/978-3-642-82580-4_31.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Chen, Zhong, and XianMing Zhang. "Monitoring of Tool Wear Using Feature Vector Selection and Linear Regression." In Lecture Notes in Computer Science. Springer Berlin Heidelberg, 2005. http://dx.doi.org/10.1007/11539117_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Braglia, M., C. Festa, and E. Gentili. "Dynamic Inspection Policy in Manufacturing Systems Subjected to Linear Wear Process." In AMST ’99. Springer Vienna, 1999. http://dx.doi.org/10.1007/978-3-7091-2508-3_96.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Miladinović, Slavica, Sandra Gajević, Milan Banić, Aleksandar Vencl, and Blaža Stojanović. "Wear Behavior of Hypereutectic Al-18Si Composites Under Linear Reciprocating Sliding." In Lecture Notes in Networks and Systems. Springer Nature Switzerland, 2024. https://doi.org/10.1007/978-3-031-80597-4_21.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ogrodnik, P. J., M. J. Goodwin, and J. E. T. Penny. "The Effect of Translational and Conical Bearing Misalignment on the Response and Stability of a Non-Linear Rotor Bearing System." In Vibration and Wear in High Speed Rotating Machinery. Springer Netherlands, 1990. http://dx.doi.org/10.1007/978-94-009-1914-3_31.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Wickramarachchi, Chandula T., Timothy J. Rogers, Wayne Leahy, and Elizabeth J. Cross. "Predicting Tool Wear Using Linear Response Surface Methodology and Gaussian Process Regression." In Topics in Modal Analysis & Testing, Volume 8. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-47717-2_29.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Valdivia, A. R. "A Linear Dynamic Wear Model to Explain the Initiating Mechanism of Corrugation." In The Dynamics of Vehicles on roads and on tracks. CRC Press, 2021. http://dx.doi.org/10.1201/9781003210894-56.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Cho, Yoon Je, Joo Hyun Lee, and Eun Seong Sagong. "Comparison of Linear Wear Rate According to Femoral Head Sizes in Metal on Conventional UHMWPE Liner." In Tribology in Total Hip and Knee Arthroplasty. Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-45266-6_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Linear wear"

1

Friedersdorf, F. J. "Measurement of Corrosion - Wear Performance." In CORROSION 1996. NACE International, 1996. https://doi.org/10.5006/c1996-96354.

Full text
Abstract:
Abstract An electrochemical pin-on-disk corrosion-wear apparatus was developed at the US Bureau of Mines, Albany Research Center. The instrument was qualified using a low alloy steel (ASTM A514) and 304 stainless steel. The apparatus incorporates simple specimen and counterface geometry and is instrumented for simultaneous corrosion and wear testing. The electrochemical and wear parameters of potential, current, charge, sliding speed, frictional force and normal acceleration can be continuously displayed and recorded. After a break-in period, the electrochemical pin-on-disk produced constant w
APA, Harvard, Vancouver, ISO, and other styles
2

Batts, B. T., J. M. Stencel, R. T. Abner, J. B. Heink, and R. E. Gonzalez. "Behavior of Materials under Slurry Wear: Bench-Scale Tests." In CORROSION 1988. NACE International, 1988. https://doi.org/10.5006/c1988-88243.

Full text
Abstract:
Abstract Experiments are described and results discussed concerning the erosion/corrosion effects that coal slurries have on various materials. These experiments, performed in a laboratory-scale wear test apparatus, use slurries containing silica sand, Kentucky #9 coal. Pond Creek coal, and refuse from a coal preparation plant. It was found that the guantity of ash is not as important in overall materials wear as is the composition and location of ash within the coal matrix. The wear of the steel materials under slurry impingement exhibit linear behavior for silica sand and Kentucky #9 coal. H
APA, Harvard, Vancouver, ISO, and other styles
3

Kadin, Yuri, Gerrit Jan Dop, Richard Schaake, Gijs de Kort, and Marcus Boehm. "Modeling of Fatigue/Creep in Polymer Cage of Large Size Bearing." In The 12th International Conference on Fracture Fatigue and Wear. Trans Tech Publications Ltd, 2025. https://doi.org/10.4028/p-lmja4i.

Full text
Abstract:
A single pocket cage is the SKF product, which is used in Large Size Bearings for wind industry. The function of a bearing cage is to hold, guide and separate rolling elements, and differently from the conventional cage, the current one consists of segments, which eases the bearing assembly and reduces its weight. The long life challenge (25 years!) requires considering fatigue, and since the single pocket cage is made of PEEK polymer, it is also susceptible to creep (in near room temperature), which enhances fatigue damage. The current work proposes the numerical model capturing non-linear vi
APA, Harvard, Vancouver, ISO, and other styles
4

Parrington, R. J., and E. M. Hinchliff. "Environmental Wear Testing of Nonmetallic Materials for Compressor Applications." In CORROSION 1999. NACE International, 1999. https://doi.org/10.5006/c1999-99051.

Full text
Abstract:
Abstract A full-size prototypical test facility was designed and built to test nonmetallic materials in support of reciprocating compressor applications. Conventional test rigs utilize a pin- or ring-on-disk configuration to produce wear data in rotary motion under relatively low applied loads. In contrast, the subject test facility is constructed around a 9-inch (23-cm) stroke compressor frame. The test specimen and counterface configurations are similar to compressor packing rings and piston rods, respectively, and specimens are spring-loaded to variable levels encompassing actual compressor
APA, Harvard, Vancouver, ISO, and other styles
5

James Kau, C., Luc Vanderschuren, and Cary A. Veith. "Polyketone Polymers: a New Liner Material for Corrosion Control in Oil and Gas Industry." In CORROSION 2000. NACE International, 2000. https://doi.org/10.5006/c2000-00787.

Full text
Abstract:
Abstract Alternating aliphatic polyketones are a new family of engineering thermoplastics. The molecular chains are linear, perfectly alternating carbon monoxide and alpha olefin structures that possess a unique combination of mechanical strength, barrier properties, wear resistance and chemical resistance. Specifically, these semicrystalline polymers maintain dimensional stability and mechanical strength in corrosive hydrocarbon environments at elevated temperatures. These qualities make PK well suited for horizontal pipe liners, inner barrier layers in coilable composite tubing and downhole
APA, Harvard, Vancouver, ISO, and other styles
6

Martin, Richard L. "Minimizing Wear-Accelerated Corrosion in Sucker Rod Pumped Oilwells with Corrosion Inhibitors." In CORROSION 2012. NACE International, 2012. https://doi.org/10.5006/c2012-01082.

Full text
Abstract:
Abstract Anytime sucker rods contact the inner diameter of production tubing in corrosive wells, wear accelerated corrosion will result. The resultant damage is likely to be greater than the sum of the two factors acting individually. Experience tends to agree that minimizing the corrosion component with corrosion inhibitors minimizes the damage, and that continuous application of the inhibitor is more beneficial than batch application. This paper follows laboratory development and field testing of a batch applied corrosion inhibitor designed to have added benefit for this task. In the laborat
APA, Harvard, Vancouver, ISO, and other styles
7

Pitt, C. H., and Y. M. Chang. "Jet Slurry Corrosive Wear of High Chromium Cast Iron and High Carbon Steel Grinding Ball Alloys." In CORROSION 1985. NACE International, 1985. https://doi.org/10.5006/c1985-85365.

Full text
Abstract:
Abstract Samples of high chromium cast alloy and high carbon steel grinding ball were subjected to jet slurry impingement in an apparatus which was electrochemically instrumented. The jet velocity was 6.6 m/sec. Quartz and chalcopyrite slurries containing 15% solids were used at pH values ranging from 5 to 11. Pure wear rates were obtained by cathodic protection while pure corrosion rates were obtained by linear polarization techniques. A synergistic effect was found between corrosion and erosive wear. The high chrome sample was found to be more resistant to weight loss primarily due to its be
APA, Harvard, Vancouver, ISO, and other styles
8

Karuppusamy, Naveen Senniappan, Pal Pandian P, Hyun-Soon Lee, and Bo-Yeong Kang. "Tool wear and tool life estimation based on linear regression learning." In 2015 IEEE International Conference on Mechatronics and Automation (ICMA). IEEE, 2015. http://dx.doi.org/10.1109/icma.2015.7237449.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Kepple, Alan, Marwan Charrouf, David Rackiewicz, and Phillip Rush. "Non-Linear Analysis of Steam Generator U-Tube In-Plane Vibration." In ASME 2013 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/pvp2013-98163.

Full text
Abstract:
Unexpected steam generator tube wear has recently been discovered during in-service inspection of newly installed PWR replacement steam generators. The extent of this unexpected tube wear suggests that a new wear mechanism is emerging that is not described by current tube wear models. A key to understanding the emerging unexpected tube wear may be to better understand the effectiveness of the mechanical design for tube support (flat bars with tight clearances) with respect to preventing flow induced tube vibration, and the characteristics of hydraulic forces exerted on tubes. This paper descri
APA, Harvard, Vancouver, ISO, and other styles
10

Gevaert, Matthew R., Martine LaBerge, Jennifer M. Gordon, and John D. DesJardins. "The Quantification of Physiologically Relevant Cross Shear Wear Phenomena on Orthopaedic Bearing Materials Using a Novel Wear Testing Machine." In ASME/STLE 2004 International Joint Tribology Conference. ASMEDC, 2004. http://dx.doi.org/10.1115/trib2004-64150.

Full text
Abstract:
Background: Multi-directional sliding motions between total knee replacement materials is a suspected primary wear mechanism of ultra-high molecular weight poly(ethylene) (UHMWPE). Method of Approach: A wear testing machine was developed to quantify damage from crossing contact pathways on candidate biomaterials. A cyclic five-pointed star pattern was used to evaluate the tribological differences between linear and cross-motion surface tribology of stainless steel pins on flat UHMWPE. Results: Volumetric reconstruction of resultant damage showed that cross-shear volume loss was 2.94(± 0.88) ti
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Linear wear"

1

Stock, James, and Motohiro Yogo. Testing for Weak Instruments in Linear IV Regression. National Bureau of Economic Research, 2002. http://dx.doi.org/10.3386/t0284.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Luo Y. Matrix Perturbation Approach to the Weak Linear Coupling. Office of Scientific and Technical Information (OSTI), 2005. http://dx.doi.org/10.2172/1061779.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Windmeijer, Frank, and Eleanor Sanderson. A weak instrument F-test in linear IV models with multiple endogenous variables. Institute for Fiscal Studies, 2013. http://dx.doi.org/10.1920/wp.cem.2013.5813.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Windmeijer, Frank, and Eleanor Sanderson. A weak instrument F-test in linear IV models with multiple endogenous variables. Institute for Fiscal Studies, 2015. http://dx.doi.org/10.1920/wp.cem.2015.3115.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Muhlestein, Michael, and Carl Hart. Numerical analysis of weak acoustic shocks in aperiodic array of rigid scatterers. Engineer Research and Development Center (U.S.), 2020. http://dx.doi.org/10.21079/11681/38579.

Full text
Abstract:
Nonlinear propagation of shock waves through periodic structures have the potential to exhibit interesting phenomena. Frequency content of the shock that lies within a bandgap of the periodic structure is strongly attenuated, but nonlinear frequency-frequency interactions pumps energy back into those bands. To investigate the relative importance of these propagation phenomena, numerical experiments using the Khokhlov-Zabolotskaya-Kuznetsov (KZK) equation are carried out. Two-dimensional propagation through a periodic array of rectangular waveguides is per-formed by iteratively using the output
APA, Harvard, Vancouver, ISO, and other styles
6

Wiesner, Tobias Albert. Weak scaling study: semi-coarsening and line-smoothing with MueLu. Office of Scientific and Technical Information (OSTI), 2017. http://dx.doi.org/10.2172/1364462.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Bane, Karl LF. Analytical Formula for Weak Multi-Bunch Beam Break-Up in a Linac. Office of Scientific and Technical Information (OSTI), 2000. http://dx.doi.org/10.2172/763825.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Blau, P. J. A Review of Sub-Scale Test Methods to Evaluate the Friction and Wear of Ring and Liner Materials for Spark- and Compression Ignition Engines. Office of Scientific and Technical Information (OSTI), 2002. http://dx.doi.org/10.2172/814479.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Gomez Osorio, Camillo, Cherran O'Brien, Jeetendra Khadan, Chrystol Thomas, Juan Pedro Schmid, and Mark D. Wenner. Caribbean Region Quarterly Bulletin: Volume 4: Issue 3: October 2015. Inter-American Development Bank, 2015. http://dx.doi.org/10.18235/0008110.

Full text
Abstract:
The Caribbean Region Quarterly Bulletin discusses recent economic developments in the 6 IDB-member Caribbean countries, as well as the Organization of Eastern Caribbean States (OECS). The countries are: The Bahamas, Barbados, Guyana, Jamaica, Suriname and Trinidad and Tobago. In the Special Country Reports, we look at credit ratings in the Caribbean. In line with challenging economic developments, credit ratings have been under pressure in several Caribbean countries. Weak fiscal situations, structural current account deficits, and vulnerability to external shocks all have put pressure on the
APA, Harvard, Vancouver, ISO, and other styles
10

Thomas, Strobel. A contrastive approach to grammatical doubts in some contemporary Germanic languages (German, Dutch, Swedish). Goethe-Universität Frankfurt a.M., 2023. http://dx.doi.org/10.21248/gups.72278.

Full text
Abstract:
Unquestionably (or: undoubtedly), every competent speaker has already come to doubt with respect to the question of which form is correct or appropriate and should be used (in the standard language) when faced with two or more almost identical competing variants of words, word forms or sentence and phrase structure (e.g. German "Pizzas/Pizzen/Pizze" 'pizzas', Dutch "de drie mooiste/mooiste drie stranden" 'the three most beautiful/most beautiful three beaches', Swedish "större än jag/mig" 'taller than I/me'). Such linguistic uncertainties or "cases of doubt" (cf. i.a. Klein 2003, 2009, 2018; Mü
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Linear wear' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography