Relevant bibliographies by topics / Little printer

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Little printer'

Author: Grafiati
Published: 28 May 2022
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Little printer.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Little printer"

1

Tiki Ramdhani and Toni Arifin. "Penerapan Metode Naïve Bayes Dalam Mendiagnosa Kerusakan Printer." Jurnal Ilmiah Teknik Informatika dan Komunikasi 3, no. 3 (2023): 65–73. http://dx.doi.org/10.55606/juitik.v3i3.618.

Full text
Abstract:
Printers are devices that are utilized as print media. Despite the fact that a lot of printers have issues, little is known about printer damage at this time. while damage necessitates careful handling. The Naive Bayes method is one of many methods that can be used in expert systems. The point of this examination is to figure out how to carry out the utilization of diagnosing printer harm utilizing the Guileless Bayes strategy at the TR PrintComp organization and to figure out what the test aftereffects of the application are in diagnosing printer harm utilizing the Gullible Bayes technique at
APA, Harvard, Vancouver, ISO, and other styles
2

Melenka, Garrett W., Jonathon S. Schofield, Michael R. Dawson, and Jason P. Carey. "Evaluation of dimensional accuracy and material properties of the MakerBot 3D desktop printer." Rapid Prototyping Journal 21, no. 5 (2015): 618–27. http://dx.doi.org/10.1108/rpj-09-2013-0093.

Full text
Abstract:
Purpose – This paper aims to evaluate the material properties and dimensional accuracy of a MakerBot Replicator 2 desktop 3D printer. Design/methodology/approach – A design of experiments (DOE) test protocol was applied to determine the effect of the following variables on the material properties of 3D printed part: layer height, per cent infill and print orientation using a MakerBot Replicator 2 printer. Classical laminate plate theory was used to compare results from the DOE experiments with theoretically predicted elastic moduli for the tensile samples. Dimensional accuracy of test samples
APA, Harvard, Vancouver, ISO, and other styles
3

POLEG, EYAL. "The First Bible Printed in England: A Little Known Witness from Late Henrician England." Journal of Ecclesiastical History 67, no. 4 (2016): 760–80. http://dx.doi.org/10.1017/s0022046916000658.

Full text
Abstract:
The first Bible to be printed in England was produced in 1535 by the royal printer, and with Henry VIII's initial support. It has attracted little scholarly attention. This first extensive examination traces its creation and early reception as witness to the uncertain course of the English Reformation. Its origins reveal a dependency on continental models, which were then modified to create a book carefully placed between conservatism and reform. Priests, scholars, children and crooks left their marks on the Bible, and advanced digital technology exposes unique evidence for the merging of Lati
APA, Harvard, Vancouver, ISO, and other styles
4

Naify, Christina J., Colby W. Cushing, Nathan P. Geib, et al. "Effects of printer variation on vibration response of fused deposition modeling-fabricated elastic beams with symmetric and asymmetric resonators: A round robin study." Journal of the Acoustical Society of America 155, no. 3_Supplement (2024): A267. http://dx.doi.org/10.1121/10.0027452.

Full text
Abstract:
Additive manufacturing has expanded rapidly as a production tool due to its ease of use for rapidly producing parts. The most common polymer-based additive approach is fused deposition modeling (FDM) which uses plastic filament to build parts additively, one line at a time, to build a 3D shape. FDM printers are ubiquitous in university, government and industry settings, making them ideal for mass-production of shared designs across institutions. While it is commonly known that FDM finished products have variations due to differences in printer model and slicing and extrusion settings, little h
APA, Harvard, Vancouver, ISO, and other styles
5

Saputro, Adi Kurniawan, Fifi Ayu Rochmakhayatin, Haryanto, and Miftachul Ulum. "Electrical Power Consumption Monitoring on Filament 3D Printer Using Web Based." E3S Web of Conferences 328 (2021): 02002. http://dx.doi.org/10.1051/e3sconf/202132802002.

Full text
Abstract:
In Indonesia, the use of 3D printers is gaining popularity in industrial processes, because the use of 3D printers in the manufacture of objects takes a relatively shorter time. However, in Indonesia, there is still very little information about the results of the 3D printer process, such as how much strength the object produced from the process, the accuracy and others. In this research, 10 experiments parameters such as current, voltage, power and energy was testing to get electrical power consumption. If time of usage parameter is added, then the results can be used to calculate how much bi
APA, Harvard, Vancouver, ISO, and other styles
6

Prakash, Kode Jaya, and Shivraj Narayan Yeole. "Design and Additive Manufacturing of a Prototype Using Fused Deposition Modeling Technique." Journal of Mechatronics Machine Design and Manufacturing 6, no. 2 (2024): 1–6. http://dx.doi.org/10.46610/jmmdm.2024.v06i02.001.

Full text
Abstract:
A screw jack is a tool for lifting heavy loads with little effort. In this paper, the design, model and fabrication of a Screw jack using 3D Printing Technology is discussed. Digital fabrication, or 3D printing or additive manufacturing, creates physical objects from a geometrical representation by successive addition of materials. In agriculture, health care, motor vehicles, locomotives and aviation, 3D Printing is increasingly being applied for mass customization or production for all types of open-source design. Design is an important industrial activity which influences the quality of the
APA, Harvard, Vancouver, ISO, and other styles
7

Praneeth, B. "Exploring Parametric Screw Jack Design through 3D Printing." International Journal for Research in Applied Science and Engineering Technology 13, no. 6 (2025): 973–78. https://doi.org/10.22214/ijraset.2025.72115.

Full text
Abstract:
A screw jack is a tool for lifting heavy loads with little effort. In this paper, the design, model and fabrication of a Screw jack using 3D Printing Technology is discussed. Digital fabrication, or 3D printing or additive manufacturing, creates physical objects from a geometrical representation by successive addition of materials. In agriculture, health care, motor vehicles, locomotives and aviation, 3D Printing is increasingly being applied for mass customization or production for all types of open-source design. Design is an important industrial activity which influences the quality of the
APA, Harvard, Vancouver, ISO, and other styles
8

Thaweskulchai, Thana, and Albert Schulte. "A Low-Cost 3-in-1 3D Printer as a Tool for the Fabrication of Flow-Through Channels of Microfluidic Systems." Micromachines 12, no. 8 (2021): 947. http://dx.doi.org/10.3390/mi12080947.

Full text
Abstract:
Recently published studies have shown that microfluidic devices fabricated by in-house three-dimensional (3D) printing, computer numerical control (CNC) milling and laser engraving have a good quality of performance. The 3-in-1 3D printers, desktop machines that integrate the three primary functions in a single user-friendly set-up are now available for computer-controlled adaptable surface processing, for less than USD 1000. Here, we demonstrate that 3-in-1 3D printer-based micromachining is an effective strategy for creating microfluidic devices and an easier and more economical alternative
APA, Harvard, Vancouver, ISO, and other styles
9

Morozova, Nadežda, and Aleksandr Parshenkov. "Francisk Skorina, Wroclaw and Adam Dyon: Book Migration and the First Paleotype of the Grand Duchy of Lithuania." Slavistica Vilnensis 69, no. 2 (2025): 21–40. https://doi.org/10.15388/slavviln.2024.69(2).2.

Full text
Abstract:
This article provides an analysis of the early history of a copy of Akathists by Francisk Skorina, held in the Wroclaw University Library, along with a detailed examination of the edition’s specific decorative features. Evidence is presented demonstrating that this copy of the Akathists formerly belonged to Daniel Prinz von Buchau. Through a thorough study of the historical context, the authors conclude that Skorina employed se­ condary printed materials in the production of his Akathists. The hypothesis regarding the possible Nuremberg origin of certain decorative elements in Skorina’s editio
APA, Harvard, Vancouver, ISO, and other styles
10

Horrocks, Jamie. ""An Organ of Their Own": Victorian Print Trade Journals and the Evolution of Graphic Design Thinking." Victorian Periodicals Review 56, no. 2 (2023): 205–43. http://dx.doi.org/10.1353/vpr.2023.a912318.

Full text
Abstract:
Abstract: In 1895, Victorian printer and letterpress historian George Joyner reflected upon the change that had been wrought in the character of British job and book printing, calling it "little short of a revolution!" He is correct; the second half of the nineteenth century saw the transformation of printers into designers. Central to this transformation was the explosion of print trade journals, which fueled the nineteenth-century revolution in British letterpress print design. These journals—more than one hundred of which were founded during the period—became energetic remediators of design
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Little printer"

1

Fedyay, O. V. "Little printer." Thesis, Сумський державний університет, 2013. http://essuir.sumdu.edu.ua/handle/123456789/33624.

Full text
Abstract:
Little Printer lives in your home, bringing you news, puzzles and gossip from friends. Use your smartphone to set up subscriptions and Little Printer will gather them together to create a timely, beautiful miniature newspaper. Connected to the Web, Little Printer has a wide range of sources available to check on your behalf. We call them “publications”. Subscribe to your favourites and choose when you’d like them delivered. Right on time Little Printer gathers everything it needs to prepare a neat little personalised package, printed as soon as you press the button. When you are citing the doc
APA, Harvard, Vancouver, ISO, and other styles
2

Byrne, Nicholas. "The little port that could : changing port governance in Prince Rupert, British Columbia, 1945-2014." Thesis, University of British Columbia, 2015. http://hdl.handle.net/2429/54002.

Full text
Abstract:
The Port of Prince Rupert, located north of Vancouver, Canada, by approximately 700 kilometers, has experienced rapid growth and development of terminal facilities and road and rail infrastructure over the past fifteen years. This port growth in Prince Rupert is, as residents hope, the cause of future economic growth for the city, with improved transport and tourism-related employment opportunities after a decade of decline following the closure of the Skeena Cellulose pulp mill near the city in 2001. The growth and development of the Port of Prince Rupert is the result of several factors, inc
APA, Harvard, Vancouver, ISO, and other styles
3

Shanks, Rhonda. "Reconciling narrative spaces : conceptual blending in Saint-Exupery's The Little Prince and Calvino's Invisible Cities." Thesis, University of British Columbia, 2008. http://hdl.handle.net/2429/897.

Full text
Abstract:
Narratologists define narrative as a chronological series of events, and thus focus on temporality in their definitions of narrative form, neglecting the crucial role that space and spatiality may play in some narratives. In this project, I use cognitive linguists Fauconnier and Turner's theory of conceptual blending to analyze two very different pieces of literature, Antoine de Saint-Exupery's The Little Prince and Italo Calvino's Invisible Cities, the former a children's story and the latter a postmodern experimental work of fiction. While many narratologists and literary theorists focus on
APA, Harvard, Vancouver, ISO, and other styles
4

Chandrasekhar, Harini. "A Journey through a Story : Remembering to be a child again with The Little Prince." Thesis, Virginia Tech, 2020. http://hdl.handle.net/10919/100739.

Full text
Abstract:
myth (n.) A traditional story which embodies a belief regarding some fact or phenomenon of experience, and in which often the forces of nature and of the soul are personified; a sacred narrative regarding a god, a hero, the origin of the world or of a people.2 A parable; An allegory. From the French word mythe (1818) and directly from Modern Latin mythus, which originated from ancient Greek mŷthos : "speech, thought, discourse, word, humour, conversation, story, saga, tale, anything delivered by word of mouth". Attested in English since 1830. Ever since I was a child, I have been fascina
APA, Harvard, Vancouver, ISO, and other styles
5

Whitehurst, John R. ""Little Holes to Hide In": Civil Defense and the Public Backlash Against Home Fallout Shelters, 1957-1963." Digital Archive @ GSU, 2012. http://digitalarchive.gsu.edu/history_theses/58.

Full text
Abstract:
Throughout the 1950s, U.S. policymakers actively encouraged Americans to participate in civil defense through a variety of policies. In 1958, amidst confusion concerning which of these policies were most efficient, President Eisenhower established the National Shelter Plan and a new civil defense agency titled The Office of Civil and Defense Mobilization. This agency urged homeowners to build private fallout shelters through print media. In response, Americans used newspapers, magazines, and science fiction novels to contest civil defense and the foreign and domestic policies that it was based
APA, Harvard, Vancouver, ISO, and other styles
6

Chandler, Yuell "Chuck" E. IV. "OPERA AND THE MODERN CULTURE OF FILM: THE GENESIS OF CINEMOPERA, ITS INTERTEXTUALITY AND EXPANSION OF OPERATIC SOURCE MATERIAL." UKnowledge, 2012. http://uknowledge.uky.edu/music_etds/1.

Full text
Abstract:
The boundaries of opera, as in all art forms, are constantly being re-evaluated. This analysis examines one of the most recent developments in opera-the use of film as source material, and connections to the film world- through analyzing three operas: Austrian composer, Olga Neuwirth’s opera, Lost Highway, Chinese-American composer, Tan Dun’s opera, The First Emperor, and acclaimed American film composer, Rachel Portman’s opera, The Little Prince. Each of these works exemplifies the modern relationship of opera and film in different ways. To classify these newly film-influenced works, the term
APA, Harvard, Vancouver, ISO, and other styles
7

Plante, Anne-Charlotte. "Mémoire de licence La réception du message donné dans Le Petit Prince : Une étude sur la réception et l’interprétation du message donné dans Le Petit Prince par Antoine de Saint-Exupéry chez l’adulte et l’enfant." Thesis, Högskolan Dalarna, Franska, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:du-22535.

Full text
Abstract:
Le présent travail est une étude sur Le Petit Prince, d’Antoine de Saint-Exupéry. Le but principal du mémoire est d’analyser la réception du message chez le lecteur adulte et chez le lecteur enfant. Nous avons analysé comment l’enfant et l’adulte interprètent le message donné par l’oeuvre, parsemée d’images et d’allégories, des citations qui son devenues symboliques avec le temps. Ensuite, nous avons analysé les personnages dans le but d’interpréter leur sens symbolique. Pour réaliser cette recherche, nous avons regardé plusieurs interprétations allégoriques. Les résultats de notre étude nous
APA, Harvard, Vancouver, ISO, and other styles
8

Banks, Joyce M. "Books in syllabic characters printed for the use of the Church Missionary Society among the Cree, Saulteaux, Slave and Tukudh Indians and the Eskimos of Little Whale River in the diocese of Rupert's Land : 1852-1872." Thesis, University College London (University of London), 1988. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.252138.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Johnson, Shelley. "This little chicken went to Africa : a historical survey into the development of narrative structures within relief printmaking in community centres in South Africa and a formal analysis of the relevance of the medium in contemporary children's picture book illustration." Thesis, Stellenbosch : University of Stellenbosch, 2009. http://hdl.handle.net/10019.1/1725.

Full text
Abstract:
Thesis (MPhil (Visual Arts. Illustration))--University of Stellenbosch, 2009.<br>When dealing with emergent literacy in South Africa, the didactic aspects of picture books are often privileged over their aesthetic quality and the idea of reading for pleasure. The themes of the books are not always locally relevant and for economic reasons, they often fail to reach the communities that need them the most. By looking at the history of relief printing within a community environment, I hope to highlight how communities themselves may be able to develop locally relevant children’s picture books, i
APA, Harvard, Vancouver, ISO, and other styles
10

Weaver, Angela L. "Public Negotiation: Magazine Culture and Female Authorship, 1900-1930." Miami University / OhioLINK, 2009. http://rave.ohiolink.edu/etdc/view?acc_num=miami1259611809.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Little printer"

1

Melady, John. The little princes. Scholastic-TAB, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Waring, Rob. The little mermaid. [E-future], 2016.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Welch, Sheila Kelly. Little Prince Know-It-All. Golden Books, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Těsnohlídek, Rudolf. The cunning little vixen. Farrar, Straus & Giroux, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Disney Enterprises. Pixar Animation Studios. The Little Mermaid. Parragon, 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Brown, Margaret Wise. The little river. Two Ponds Press, 2013.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Grimly, Gris. Little Jordan Ray's muddy spud. Baby Tattoo Books, 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Drewermann, Eugen. Discovering the royal child within: A spiritual psychology of "The little prince". Crossroad, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Kennedy, Patrick. From Long Bay to Malabar: A village by the sea. P. Kennedy, 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Little Princes. William Morrow, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Little printer"

1

Alam, Shaurav, Stephen Gordon, Blake Bassett, et al. "Three-Dimensional Printing of Fly Ash-Based Geopolymer Materials." In Lecture Notes in Civil Engineering. Springer Nature Switzerland, 2025. https://doi.org/10.1007/978-3-031-69626-8_2.

Full text
Abstract:
AbstractThis research aims to design and develop a proof-of-concept system for three-dimensional (3D) printing of fly ash-based geopolymer materials. The primary focus of this research was designing and creating a 3D printer capable of printing straight multi-layered geopolymer walls. The geopolymer mixture consists of fly ash, an industrial waste by-product, sand, sodium silicate, sodium hydroxide, and water. Through the controlled application of AC voltage, the natural resistance of the geopolymer causes heat generation through a phenomenon known as ohmic heating. This heating method rapidly
APA, Harvard, Vancouver, ISO, and other styles
2

Palma, Massimo. "The Little Prince." In Walter Benjamin and Antonio Gramsci. Routledge, 2024. http://dx.doi.org/10.4324/9781003457039-12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Hooks, Ed. "The Little Prince (2016)." In Acting for Animators. Routledge, 2017. http://dx.doi.org/10.4324/9781315618272-13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Wee, Desmond. "Walking with the Little Prince in Busan." In Tourism in Asian Cities. Routledge, 2020. http://dx.doi.org/10.4324/9780429264801-17.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Steinberg, Yael. "Searching for "Sweet Dreams" and the "Little Prince"." In Psychodynamic Self Psychology in the Treatment of Anorexia and Bulimia. Routledge, 2020. http://dx.doi.org/10.4324/9781003000280-14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Stoker, David. "7. Slip Songs and Engraved Song Sheets." In Cheap Print and Street Literature of the Long Eighteenth Century. Open Book Publishers, 2023. http://dx.doi.org/10.11647/obp.0347.07.

Full text
Abstract:
During the 1690s a new print format began to emerge – the slip song, or slip ballad, which rapidly became the most popular means for disseminating the words of popular songs. There has been little research into the format and production of these songs. This chapter therefore provides a case study of the 3,800 songs listed on ESTC annotated with the words slip song. It considers such matters as the format, illustration, price, subject content, date, language, authorship and or performance, place of publication, and who printed, sold, or collected them. During the last quarter of the eighteenth
APA, Harvard, Vancouver, ISO, and other styles
7

Haven, Lisa Stein. "Narrativizing Charlie in Print and Film." In Charlie Chaplin’s Little Tramp in America, 1947–77. Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-40478-3_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Kudrowitz, Barry. "Play–Creativity Connections The Little Prince, and Positive Affect." In Sparking Creativity. Routledge, 2023. http://dx.doi.org/10.4324/9781003276296-26.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Azzahra, Natasya Amanda, and Sulistya Ningtyas. "A Sociological Analysis of Ideological Constructs in “The Little Prince”." In Advances in Social Science, Education and Humanities Research. Atlantis Press SARL, 2024. https://doi.org/10.2991/978-2-38476-313-9_17.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

MacLeod, Kirsten. "The Fine Art of Cheap Print: Turn-of-the-Century American Little Magazines." In Transatlantic Print Culture, 1880–1940. Palgrave Macmillan UK, 2008. http://dx.doi.org/10.1057/9780230228450_12.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Little printer"

1

Lopes, Lucas, Harish Daruari, Manuela Almeida, Florindo Gaspar, and Paulo Mendonca. "Closing the Loop of Circularity by Harnessing Additive Manufacturing to Reuse, Recycle and Reintroduce Marine Plastic Waste Back into the Built Environment." In 2024 10th International Conference on Architecture, Materials and Construction & 2024 5th International Conference on Building Science, Technology and Sustainability. Trans Tech Publications Ltd, 2025. https://doi.org/10.4028/p-kptjg4.

Full text
Abstract:
The amount of marine plastic litter in the ocean poses a major threat to the environment, especially coastal communities. High-Density Polyethylene (HDPE), a durable plastic widely used in marine applications like fishing lines, nets, and mooring cables, is a significant contributor to marine pollution. This research explores the potential of repurposing maritime activity-derived HDPE waste for use in the Architecture, Engineering and Construction (AEC) industries through additive manufacturing technologies, such as 3D printing. The study also researches the source of the waste, detailing the
APA, Harvard, Vancouver, ISO, and other styles
2

Wei, Xingjian, Li Zeng, and Zhijian Pei. "Experimental Investigation of PolyJet 3D Printing Process: Effects of Finish Type and Material Color on Color Appearance." In ASME 2019 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/imece2019-11917.

Full text
Abstract:
Abstract The Stratasys J750 PolyJet printer is capable of printing full-color parts. However, little information is currently available about the effects of finish type and material color on color appearance of parts printed by the PolyJet process. In this study, the effects of finish type and material color on color appearance of PolyJet printed parts are investigated; two finish types (glossy and matte) and four material colors (cyan, magenta, yellow, and black) are considered. The results suggest that the main effects of finish type and its interactions with material color are significant.
APA, Harvard, Vancouver, ISO, and other styles
3

Le, Xiaobin, Rami Akouri, Anthony Latassa, Brett Passemato, and Ryan Wales. "Mechanical Property Testing and Analysis of 3D Printing Objects." In ASME 2016 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/imece2016-65067.

Full text
Abstract:
3D printing known as additive manufacturing has been widely used in academics and industries to make various 3D objects for various applications. The strength of the 3D printing parts is different from its original material strength due to this additive manufacturing technique. The 3D printing parts should be treated as anisotropic materials. However, the information of mechanical property such as the ultimate strength of 3D printing parts is very limited. There is little information about the mechanical property of 3D printing parts at different print angles. This research was focused on expl
APA, Harvard, Vancouver, ISO, and other styles
4

Wu, Dazhong, Yupeng Wei, and Janis Terpenny. "Surface Roughness Prediction in Additive Manufacturing Using Machine Learning." In ASME 2018 13th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/msec2018-6501.

Full text
Abstract:
To realize high quality, additively manufactured parts, real-time process monitoring and advanced predictive modeling tools are crucial for accelerating quality assurance and quality control in additive manufacturing. While previous research has demonstrated the effectiveness of physics- and model-based diagnosis and prognosis for additive manufacturing, very little research has been reported on real-time monitoring and prediction of surface roughness in fused deposition modeling (FDM). This paper presents a new data-driven approach to surface roughness prediction in FDM. A real-time monitorin
APA, Harvard, Vancouver, ISO, and other styles
5

Lum, Kassy M., Donnie Proffitt, Ann Whitney, and Johné M. Parker. "Experimental Investigation and Numerical Optimization of Key Factors Affecting the Programming Efficacy of Passive UHF RFID Tags." In ASME 2013 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/imece2013-65265.

Full text
Abstract:
Radio Frequency Identification (RFID) is a disruptive technology that uses radio waves to uniquely identify objects. As such, it has the potential to bring significant benefits to numerous government and private sector initiatives. However, significant technical challenges remain. A key area of study is in system performance: while the major hardware components in an RFID system (i.e., tags, readers and middleware) have been and continue to be studied extensively, there has been little research, comparatively, in characterizing RFID system performance. The research presented in this paper was
APA, Harvard, Vancouver, ISO, and other styles
6

Lai, Heather L., and Aaron Nelson. "Multi-Material FDM 3D Printing Process Parameter Development Based on Bending Test Characterization." In ASME 2019 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/imece2019-10496.

Full text
Abstract:
Abstract The purpose of this investigation is to study the effects of perimeter inflation on the dynamic behavior of a flexible / rigid multi-material interface. The results of this study can be applied to applications where there is a need for low cost, multi-material 3D printed parts which have both flexibility and strength at the material interfaces designed to undergo simultaneous axial strain and flexural strain. A non-homogeneous 3D printed structure with the desired static and dynamic mechanical behavior was designed using a flexible thermoplastic polyurethane substrate (NinjaFlex) and
APA, Harvard, Vancouver, ISO, and other styles
7

Evans, Daniel J., Sankar Jayaram, John T. Feddema, Uma Jayaram, William A. Johnson, and Hans Seywald. "Haptic Display of Interaction Forces in MEMS Assembly Processes." In ASME 2000 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2000. http://dx.doi.org/10.1115/detc2000/cie-14581.

Full text
Abstract:
Abstract In recent years, the world economy has seen expansive market growth in the area of Micro-Electro Mechanical Systems (MEMS). It is predicted that the MEMS market could reach more than $34 billion by the year 2002. Today, commercially available MEMS products include accelerometers for airbags and inkjet printer heads. These products require little or no assembly because a monolithic integrated circuit process is used to develop the devices. However, future MEMS will be more elaborate. Monolithic integration is not feasible when incompatible processes, complex geometry, or different mate
APA, Harvard, Vancouver, ISO, and other styles
8

McStravick, David M., Brent C. Houchens, David C. Garland, and Kenneth E. Davis. "Investigation of an Eppler 423 Style Wind Turbine Blade." In ASME 2010 4th International Conference on Energy Sustainability. ASMEDC, 2010. http://dx.doi.org/10.1115/es2010-90113.

Full text
Abstract:
Due to the increasing demand for alternative energy sources and the reliability of wind turbines, the performance of different horizontal-axis wind turbine blade designs were investigated and compared through computational fluid dynamics (CFD) modeling and wind tunnel testing. The Eppler 423 airfoil was of particular interest. In avionics the blade has been associated with high lift and a low tendency to stall, yet little is known about its performance in wind turbines. In both physical testing and ANSYS CFX 11.0 analysis, the airfoil significantly outperformed a Nordtank 41/500 turbine blade.
APA, Harvard, Vancouver, ISO, and other styles
9

Lai, Heather L., Cuiyu Kuang, and Jared Nelson. "Modeling and Experimental Characterization of Viscoelastic 3D Printed Spring/Damper Systems." In ASME 2017 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/imece2017-71957.

Full text
Abstract:
The development of flexible, viscoelastic materials for consumer 3D printers has provided the opportunity for a wide range of devices with damping behavior such as tuned vibration isolators to be innovatively developed and inexpensively manufactured. However, there is currently little information available about the dynamic behavior of these 3D printed materials necessary for modeling of dynamic behavior prior to print. In order to fully utilize these promising materials, a deeper understanding of the material properties, and the subsequent dynamic behavior is critical. This study evaluates th
APA, Harvard, Vancouver, ISO, and other styles
10

Barbu, Ionel. "THE PROGRAM FOR EXPERIMENTAL DATA PROCESSING IN COTTON SPINNING MILL." In eLSE 2018. Carol I National Defence University Publishing House, 2018. http://dx.doi.org/10.12753/2066-026x-18-159.

Full text
Abstract:
The quality improvement is essential for every textile enterprise. The optimization of quality could be possible only by using the best materials. The quality of products for customer reflects the materials used in factory, the cycle of production, the processing of each technological line and also the maintenance of machines on the entire technological line. If one of these criterions is neglected, the quality expected by the customer won't be the optimal one. The notion of optimization is adopted relative because the company will be able to secure better materials, to hire a larger staff, to
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Little printer"

1

Doran, Helen, Louise Skowron, Nick Roberts, Avindri Chandraharan, and Charlotte Evans. School Food Standards Compliance Pilot: Discovery and Feasibility Research. Food Standards Agency, 2023. http://dx.doi.org/10.46756/sci.fsa.evh922.

Full text
Abstract:
Back to search Last updated: 21 November 2023 View as PDF(Opens in a new window) Print this page Area of research interest: Innovative regulator Project status: Completed Project code: FS431091 Authors: Kantar Public Conducted by: Food Standards Agency, Kantar Public, Department for Education Date published: 21 November 2023 DOI: https://doi.org/10.46756/sci.fsa.evh922 (Opens in a new window) The Requirements for School Food Regulations 2014 (Opens in a new window) in England (known as the ‘School Food Standards’), are mandatory for all maintained schools, including academies and free schools.
APA, Harvard, Vancouver, ISO, and other styles
2

Selections from the Inter-American Development Bank Art Collection: 2007. Inter-American Development Bank, 2007. http://dx.doi.org/10.18235/0006431.

Full text
Abstract:
In commemoration of the fifteenth anniversary of the IDB Cultural Center, the IDB proudly accepted the invitation of Anne Plummer, Director of the Arkansas Art Center (AAC), to share a selection of 65 artworks owned by the IDB, a fraction of the nearly 1,700 collected over more than 48 years, to be exhibited in Little Rock between July 6th and August 19th. This outstanding group of paintings, drawings, mixed media works, and prints, selected from the IDB's vast and impressive collection by AAC curator Joseph W. Lampo, represents the best in Latin American art of the recent past. It surely enco
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Little printer' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography