To see the other types of publications on this topic, follow the link: Load template.

Journal articles on the topic 'Load template'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Load template.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Yosefin, Yosefin. "Short Term Load Forecasting Menggunakan Metode Koefisien." KILAT 9, no. 1 (2020): 28–35. http://dx.doi.org/10.33322/kilat.v9i1.761.

Full text
Abstract:
Electrical energy has a very important role in national economic growth. With the electrical energy requirements, it is necessary to operate an economical, reliable and quality system. The creation of a template for operating load forecasting for the Java-Bali system uses a coefficient method to calculate weekly loads, daily loads, and loads per ½ hour which is more user friendly. After this Load Forecasting template is applied, the result is a more efficient load deepening in terms of file size and time, and is more effective with the results of the calculation of electric energy (1.71%), ele
APA, Harvard, Vancouver, ISO, and other styles
2

Berggren, Nick, and Martin Eimer. "Visual Working Memory Load Disrupts Template-guided Attentional Selection during Visual Search." Journal of Cognitive Neuroscience 30, no. 12 (2018): 1902–15. http://dx.doi.org/10.1162/jocn_a_01324.

Full text
Abstract:
Mental representations of target features (attentional templates) control the selection of candidate target objects in visual search. The question where templates are maintained remains controversial. We employed the N2pc component as an electrophysiological marker of template-guided target selection to investigate whether and under which conditions templates are held in visual working memory (vWM). In two experiments, participants memorized one or four shapes (low vs. high vWM load) before either being tested on their memory or performing a visual search task. When targets were defined by one
APA, Harvard, Vancouver, ISO, and other styles
3

Dass, Ghanshyam, Anil Kumar, and Manoj Kumar Kushwaha. "Renovate Tribological Properties of Nanostructured Alumina Templates by Diverse Electrolytes." Advanced Science, Engineering and Medicine 12, no. 6 (2020): 806–9. http://dx.doi.org/10.1166/asem.2020.2619.

Full text
Abstract:
Friction and wear properties of NAAO templates were calculated in affinity to pore dimensions and applied load. Homogeneously uniformly decorative synthesized by anodization of nanoporous aluminium oxide films having 65–95 μm thick and pores of 143.5, 105, 84.4 nm diameter. A tribological competency of the material checked out with loads and 250 rpm on the pin on a dry wear disc. The anodized NAAO sample has wear resistance increased by 25% as compared to the non-anodized sample. The pore density little bit impressed the frictional characters of NAAO template. We counsel that these course temp
APA, Harvard, Vancouver, ISO, and other styles
4

Baravykaitė, Milda, and Raimondas Čiegis. "AN IMPLEMENTATION OF A PARALLEL GENERALIZED BRANCH AND BOUND TEMPLATE." Mathematical Modelling and Analysis 12, no. 3 (2007): 277–89. http://dx.doi.org/10.3846/1392-6292.2007.12.277-289.

Full text
Abstract:
Branch and bound (BnB) is a general algorithm to solve optimization problems. We present a template implementation of the BnB paradigm. A BnB template is implemented using C++ object oriented paradigm. MPI is used for underlying communications. A paradigm of domain decomposition (data parallelization) is used to construct a parallel algorithm. To obtain a better load balancing, the BnB template has the load balancing module that allows the redistribution of search spaces among the processors at run time. A parallel version of user's algorithm is obtained automatically. A new derivative-free gl
APA, Harvard, Vancouver, ISO, and other styles
5

Binding, Ceri, Michael Charno, Stuart Jeffrey, Keith May, and Douglas Tudhope. "Template Based Semantic Integration." International Journal on Semantic Web and Information Systems 11, no. 1 (2015): 1–29. http://dx.doi.org/10.4018/ijswis.2015010101.

Full text
Abstract:
The online dissemination of datasets is becoming common practice within the archaeology domain. Since the legacy database schemas involved are often created on a per-site basis, cross searching or reusing this data remains difficult. Employing an integrating ontology, such as the CIDOC CRM, is one step towards resolving these issues. However, this has tended to require computing specialists with detailed knowledge of the ontologies involved. Results are presented from a collaborative project between computer scientists and archaeologists that created lightweight tools to make it easier for non
APA, Harvard, Vancouver, ISO, and other styles
6

Sun, Rui Qi, Jie Yang, Zhan Gao, and Zhi Qiang He. "A Framework of Automatic Deployment for Cloud Management Platforms." Applied Mechanics and Materials 631-632 (September 2014): 218–21. http://dx.doi.org/10.4028/www.scientific.net/amm.631-632.218.

Full text
Abstract:
With the widespread adoption of Cloud infrastructure, there are many famous open source Cloud management platforms, but it is not a trivial task to build Infrastructure as a Service Clouds using them. Moreover, during the developing and testing phase, Cloud platforms need to be built frequently. Existing automatic deployment tools require users to have programming skills using high-level programming language. However, many Cloud administrators are not related programming experience. Therefore, they must repeatedly manually deploy the Cloud platforms step by step. In this paper, we propose a vi
APA, Harvard, Vancouver, ISO, and other styles
7

Huang, Yu-Li, Sarah M. Bach, and Sherry A. Looker. "Chemotherapy scheduling template development using an optimization approach." International Journal of Health Care Quality Assurance 32, no. 1 (2019): 59–70. http://dx.doi.org/10.1108/ijhcqa-10-2017-0187.

Full text
Abstract:
Purpose The purpose of this paper is to develop a chemotherapy scheduling template that accounts for nurse resource availability and patient treatment needs to alleviate the mid-day patient load and provide quality services for patients. Design/methodology/approach Owing to treatment complexity in chemotherapy administration, nurses are required at the beginning, end and during treatment. When nurses are not available to continue treatment, the service is compromised, and the resource constraint is violated, which leads to inevitable delay that risks service quality. Consequently, an optimizat
APA, Harvard, Vancouver, ISO, and other styles
8

Niu, Xun, Mark L. Latash, and Vladimir M. Zatsiorsky. "Prehension Synergies in the Grasps With Complex Friction Patterns: Local Versus Synergic Effects and the Template Control." Journal of Neurophysiology 98, no. 1 (2007): 16–28. http://dx.doi.org/10.1152/jn.00058.2007.

Full text
Abstract:
We studied adjustments of digit forces to changes in the friction. The subjects held a handle statically in a three-digit grasp. The friction under each digit was either high or low, resulting in eight three-element friction sets (such grasps were coined the grasps with complex friction pattern). The total load was also manipulated. It was found that digit forces were adjusted not only to the supported load and local friction, but also to friction at other digits (synergic effects). When friction under a digit was low, its tangential force decreased and the normal force increased (local effect
APA, Harvard, Vancouver, ISO, and other styles
9

Popper, Stephen J., Abdoulaye Dieng Sarr, Aïssatou Guèye-Ndiaye, Souleymane Mboup, Myron E. Essex, and Phyllis J. Kanki. "Low Plasma Human Immunodeficiency Virus Type 2 Viral Load Is Independent of Proviral Load: Low Virus Production In Vivo." Journal of Virology 74, no. 3 (2000): 1554–57. http://dx.doi.org/10.1128/jvi.74.3.1554-1557.2000.

Full text
Abstract:
ABSTRACT Levels of virus in the plasma are closely related to the pathogenicity of human immunodeficiency virus type 1 (HIV-1). HIV-2 is much less pathogenic than HIV-1, and infection with HIV-2 leads to significantly lower plasma viral load. To identify the source of this difference, we measured both viral RNA and proviral DNA in matched samples from 34 HIV-2-infected individuals. Nearly half had undetectable viral RNA loads (<100 copies/ml), but levels of proviral DNA were relatively high and confirmed that quantities of provirus in HIV-1 and HIV-2 infection were similar. Overall, HIV-2 p
APA, Harvard, Vancouver, ISO, and other styles
10

Wang, Qi, Yan Wang, Baoyan Guo, et al. "Novel heparin-loaded mesoporous tubular micromotors formed via template-assisted electrochemical deposition." Journal of Materials Chemistry B 7, no. 16 (2019): 2688–95. http://dx.doi.org/10.1039/c9tb00131j.

Full text
APA, Harvard, Vancouver, ISO, and other styles
11

Kumar, Bibhuti Bhusan. "Two Legs Voltage Source Converter with DSTATCOM, T-Connected Transformer for Power Quality Improvement." Journal of Advanced Research in Power Electronics and Power Systems 07, no. 03 (2020): 22–26. http://dx.doi.org/10.24321/2456.1401.202007.

Full text
Abstract:
The numerous loads can impact the working environment and performance of the source apparatus. Hence, the reimbursement of this current will help in enhancing the presentation of the power system apparatus. This paper presents the strategy and employment of a Distribution Static Compensator (DSTATCOM) with the T-Connected transformer for compensation of load neutral current in the presence of three-phase unbalanced linear load. There are different types of control strategy in that one of the best methods is the unit vector template method-based control algorithm has been implemented for the co
APA, Harvard, Vancouver, ISO, and other styles
12

Howarth, Jeff. "Learning by Solving Problems: Cognitive Load Theory and the Re-Design of an Introductory GIS Course." Cartographic Perspectives, no. 80 (December 3, 2015): 18–34. http://dx.doi.org/10.14714/cp80.1320.

Full text
Abstract:
This article presents a teaching model to support learning by solving problems with geographic information technology. Using the case study of a re-designed introductory course in geographic information systems, I present research from studies of expertise and Cognitive Load Theory that identify learning objectives and methods for problem-based instruction. I illustrate a general template for learning geographic technology by solving a problem based on a process of understanding the problem, developing a plan, and implementing the plan. This template also reinforces learning during practice an
APA, Harvard, Vancouver, ISO, and other styles
13

Chen, Xiang, Xiuhui Zhang, Chunguang Chen, Tao Huang, and Aishui Yu. "A porous Co–Ru@C shell as a bifunctional catalyst for lithium–oxygen batteries." RSC Advances 8, no. 42 (2018): 23973–80. http://dx.doi.org/10.1039/c8ra04144j.

Full text
APA, Harvard, Vancouver, ISO, and other styles
14

Wu, Xin, Lu Han, Zhen Wang, and Bing Qi. "A nonintrusive fast residential load identification algorithm based on frequency-domain template filtering." IEEJ Transactions on Electrical and Electronic Engineering 12 (June 2017): S125—S133. http://dx.doi.org/10.1002/tee.22425.

Full text
APA, Harvard, Vancouver, ISO, and other styles
15

Li, Yunhe, Yi Xie, and Qinyu Zhang. "3D Gesture Recognition Based on Handheld Smart Terminals." International Journal of Ambient Computing and Intelligence 9, no. 4 (2018): 96–111. http://dx.doi.org/10.4018/ijaci.2018100106.

Full text
Abstract:
With the popularity of smart devices, it has become impossible for traditional human-computer interaction techniques to accommodate people's needs. This article proposes an iOS-based three dimensional (3D) gesture recognition system, gathering users' specific gestures from their handheld smart terminals to judge implications of these gestures, so to control other smart terminals with more natural human-computer interactions. In this article, gestures were recognized by reading data about corresponding 3D gesture data with motion sensors of smart terminals using optimized dynamic time warping (
APA, Harvard, Vancouver, ISO, and other styles
16

Bae, Jae Young, and Su Guan Jang. "Preparation and Characterization of Amine-Functionalized Mesoporous Hollow Silica for CO2 Capture." Journal of Nanoscience and Nanotechnology 20, no. 11 (2020): 7070–74. http://dx.doi.org/10.1166/jnn.2020.18843.

Full text
Abstract:
Mesoporous hollow silica material (MHS) was synthesized using polystyrene as a template. Later, it was modified by wet impregnation with tetraethylenepentamine (TEPA) as a solid adsorbent for CO2 capture. Transmission electron microscopy (TEM), X-ray diffraction (XRD), IR, and TGA were used to characterize the average diameter, shell thickness, crystalline structure, and TEPA load of the prepared adsorbents. An increase in the amount of loaded TEPA, improved the CO2 adsorption capacity of the prepared adsorbents. The highest CO2 adsorption capacity was obtained using a 50 wt% TEPA load (AMHS-5
APA, Harvard, Vancouver, ISO, and other styles
17

Kexin, Zhang, and Sun Quansheng. "Strengthening of a Reinforced Concrete Bridge with Polyurethane-cement Composite (PUC)." Open Civil Engineering Journal 10, no. 1 (2016): 768–81. http://dx.doi.org/10.2174/1874149501610010768.

Full text
Abstract:
This paper describes a new material, polyurethane-cement composite (PUC), used to strengthen a 29-year-old reinforced T-beam bridge in Harbin, China. Polyurethane-cement composite (PUC) is mixed with polyurethane raw material and cement. This technique is completed by pouring Polyurethane-cement composite (PUC) into the template. Ultimate bearing capacity of the bridge after reinforcement was discussed based on the concrete structure theory. The flexural strength of reinforced concrete T-beam bridges strengthened with Polyurethane-cement composite (PUC) was controlled by the design flexural st
APA, Harvard, Vancouver, ISO, and other styles
18

Osunade, O., and J. O. Ogwumike. "MyTF: A Joomla Template Design Package for Mobile Devices." Zambia ICT Journal 1, no. 1 (2017): 15–19. http://dx.doi.org/10.33260/zictjournal.v1i1.13.

Full text
Abstract:
Websites are created using programming languages such as HTML or content management systems (CMS). There are various technologies supporting the development of websites such as content management systems, JavaScript and ASP, thus numerous types of websites exist. Users access these websites through mobile devices and desktop systems. These users require access to websites that are easy to load, display content on small screens and have fast page loading speed. The existing web management systems are deficient in regards to meeting the needs of mobile device users. Thus, the aim of this project
APA, Harvard, Vancouver, ISO, and other styles
19

Podust, L. M., V. N. Podust, J. M. Sogo, and U. Hübscher. "Mammalian DNA polymerase auxiliary proteins: analysis of replication factor C-catalyzed proliferating cell nuclear antigen loading onto circular double-stranded DNA." Molecular and Cellular Biology 15, no. 6 (1995): 3072–81. http://dx.doi.org/10.1128/mcb.15.6.3072.

Full text
Abstract:
To understand the mechanism of action of the two eukaryotic replication auxiliary proteins proliferating cell nuclear antigen (PCNA) and replication factor C (RF-C), we constructed a plasmid for producing PCNA which could be 32P labelled in vitro. This allowed us to analyze the assembly of the auxiliary proteins directly on DNA and to examine this process in the absence of DNA synthesis. By using closed circular double-stranded DNA or gapped circular DNA for protein-DNA complex formation, the following results were obtained, (i) RF-C can load PCNA in an ATP-dependent manner directly on double-
APA, Harvard, Vancouver, ISO, and other styles
20

Fan, Hui, and Yang Pei Zhao. "Technical Study of Laminated Template Electroforming in Fabrication of Metal Parts." Key Engineering Materials 621 (August 2014): 121–26. http://dx.doi.org/10.4028/www.scientific.net/kem.621.121.

Full text
Abstract:
Laminated templates electroforming (LTE) is one kind of metal-parts directly forming technologies which are based on discrete/accumulation theory. This paper introduces the forming principle, equipment configuration and experimental studies. By using templates as auxiliary tool and jet electroforming as filling method, the current density of electroforming was significantly improved and a group of copper parts in specific shape were fabricated. Experimental results show that on-load voltage, nozzle diameter, spray distance, spray flow velocity have direct influence on processing speed and loca
APA, Harvard, Vancouver, ISO, and other styles
21

Fatone, Stefania, William Brett Johnson, Lilly Tran, Kerice Tucker, Christofer Mowrer, and Ryan Caldwell. "Quantification of rectifications for the Northwestern University Flexible Sub-Ischial Vacuum Socket." Prosthetics and Orthotics International 41, no. 3 (2017): 251–57. http://dx.doi.org/10.1177/0309364616684165.

Full text
Abstract:
Background:The fit and function of a prosthetic socket depend on the prosthetist’s ability to design the socket’s shape to distribute load comfortably over the residual limb. We recently developed a sub-ischial socket for persons with transfemoral amputation: the Northwestern University Flexible Sub-Ischial Vacuum Socket.Objective:This study aimed to quantify the rectifications required to fit the Northwestern University Flexible Sub-Ischial Vacuum Socket to teach the technique to prosthetists as well as provide a computer-aided design–computer-aided manufacturing option.Study Design:Developme
APA, Harvard, Vancouver, ISO, and other styles
22

Zhang, Guoyong, Zhaohui Tang, Ying Fan, Jinping Liu, Hadi Jahanshahi, and Ayman A. Aly. "Steel Wire Rope Surface Defect Detection Based on Segmentation Template and Spatiotemporal Gray Sample Set." Sensors 21, no. 16 (2021): 5401. http://dx.doi.org/10.3390/s21165401.

Full text
Abstract:
Machine-vision-based defect detection, instead of manual visual inspection, is becoming increasingly popular. In practice, images of the upper surface of cableway load sealing steel wire ropes are seriously affected by complex environments, including factors such as lubricants, adhering dust, natural light, reflections from metal or oil stains, and lack of defect samples. This makes it difficult to directly use traditional threshold-segmentation-based or supervised machine-learning-based defect detection methods for wire rope strand segmentation and fracture defect detection. In this study, we
APA, Harvard, Vancouver, ISO, and other styles
23

Frossard, Laurent Alain. "Load on Osseointegrated Fixation of a Transfemoral Amputee during a Fall: Determination of the Time and Duration of Descent." Prosthetics and Orthotics International 34, no. 4 (2010): 472–87. http://dx.doi.org/10.3109/03093646.2010.520057.

Full text
Abstract:
Mitigation of fall-related injuries for populations of transfemoral amputees fitted with a socket or an osseointegrated fixation is challenging. Wearing a protective device fitted within the prosthesis might be a possible solution, provided that issues with automated fall detection and time of deployment of the protective mechanism are solved. The first objective of this study was to give some examples of the times and durations of descent during a real forward fall of a transfemoral amputee that occurred inadvertently while attending a gait measurement session to assess the load applied on th
APA, Harvard, Vancouver, ISO, and other styles
24

Najima, R., B. Dosher, W. Chu, and Z. L. Lu. "Visual working memory performance with contrast and external noise: A load-dependent perceptual template model account." Journal of Vision 11, no. 11 (2011): 1254. http://dx.doi.org/10.1167/11.11.1254.

Full text
APA, Harvard, Vancouver, ISO, and other styles
25

Li, Yu, Jianwen Wei, Linlin Geng, Dejun Mei, and Lei Liao. "A Novel TEPA-Load or PEI-Load Beta/KIT-6 Composite and their Application to CO2 Adsorption." Nano 16, no. 03 (2021): 2150033. http://dx.doi.org/10.1142/s1793292021500338.

Full text
Abstract:
An amine-modified Beta/KIT-6 (BK) micro/mesoporous composite for CO2 capture was synthesized using nonionic tri-block copolymer pluronic (P123) as a template, tetraethyl orthosilicate (TEOS) as a silicon source and Beta zeolite as part of silicon aluminum source by a two-step hydrothermal crystallization method. BK was modified by Tetraethylenepentamine (TEPA) or polyethyleneimine (PEI) to obtain solid amine adsorbent. The structure, uniformity and physical properties of the sample were characterized by FTIR, nitrogen adsorption/desorption and elemental analysis methods and CO2 adsorption/deso
APA, Harvard, Vancouver, ISO, and other styles
26

Liu, Qiongqiong, Dan Liu, Yan Zhang, Yanxi Wang, and Meinan Xing. "Study on spatial distribution of pollutants and total amount reduction in the Duliujian River (Tianjin, China)." Water Supply 20, no. 4 (2020): 1380–95. http://dx.doi.org/10.2166/ws.2020.054.

Full text
Abstract:
Abstract The Duliujian River is the largest river in the downstream area of the Haihe River. In order to further clarify the main pollutant load and load contribution of the basin, and analyze the watershed pollution control unit, key pollution sources and their spatial distribution characteristics, this study divides the control unit of the basin, which is based on the digital elevation model (DEM), and applies the expansion template of Arc Map–Arc Hydro tools software. On the basis of water environment capacity and total maximum daily load (TMDL) theory, water quality standards are set in ac
APA, Harvard, Vancouver, ISO, and other styles
27

Song, Li, Lin Gu, and Sai Ping Wei. "Study of Damage and Acoustic Emission Properties of Rocks under Uniaxial Cyclic Load-Unload." Advanced Materials Research 887-888 (February 2014): 878–81. http://dx.doi.org/10.4028/www.scientific.net/amr.887-888.878.

Full text
Abstract:
In order to study the damage and sptial spatial and temporal distribution of acoustic emission of rocks under uniaxial cyclic load-unload, test of rocks with various kinds of heterogeneity under uniaxial cyclic load-unload disturbance was conducted using numerical simulation software RFPA2D.Figure destruction and acoustic emission - load curve of rocks were obtained from the test.The results show that destroy of the rock was produced from tensile stress concentration area surrounding the hole. as the load increases,crack developmented to the edge of the rock.when homogeneity of rock was low, c
APA, Harvard, Vancouver, ISO, and other styles
28

Mi, Liang, Guo Fu Yin, H. Jiang, K. Y. Zhong, and J. Wang. "The Research of CAE Template and Knowledge Reuse Technology for NC Machine Tool Generalized Modular Design System." Key Engineering Materials 455 (December 2010): 11–17. http://dx.doi.org/10.4028/www.scientific.net/kem.455.11.

Full text
Abstract:
By establishing the architecture of a NC machine tool modular design system that consists of a user interface layer, an application tools layer, and a supporting technology layer, and aiming at the enterprise’s need of repeatedly FEA for product modules, a CAE analysis of information model for machine tool module which consists of geometric information, material information, boundary constraints information, load information and so on was proposed. Knowledge representation of CAE template based on five elements set structure was created, and a method for creating CAE template based on the CAE
APA, Harvard, Vancouver, ISO, and other styles
29

Cao, Yingze, Wentao Zhai, Xiang Zhang, Shuxi Li, Lin Feng, and Yen Wei. "Mesoporous SiO2-Supported Pt Nanoparticles for Catalytic Application." ISRN Nanomaterials 2013 (March 10, 2013): 1–7. http://dx.doi.org/10.1155/2013/745397.

Full text
Abstract:
SiO2 nanoparticles have been synthesized by combining Stober’s method and nonsurfactant process. The diameters and pore sizes can be controlled by altering the template and its concentration. Mesoporous SiO2 obtained this way has extremely large surface area compared with most oxide supports, which benefits the catalytic performance. Pt nanoparticles were in situ grown on and in mesoporous SiO2 nanoparticles with low amount of the metal and high load ratio. Furthermore, we firstly developed a novel route, called “one-pot” method, to prepare Pt/SiO2 catalyst where mesoporous silica preparing an
APA, Harvard, Vancouver, ISO, and other styles
30

Gottlieb, G. L. "On the voluntary movement of compliant (inertial-viscoelastic) loads by parcellated control mechanisms." Journal of Neurophysiology 76, no. 5 (1996): 3207–29. http://dx.doi.org/10.1152/jn.1996.76.5.3207.

Full text
Abstract:
1. Experiments were performed to characterize the trajectories, net muscle torques, and electromyogram (EMG) patterns when subjects performed voluntary elbow flexions against different compliant loads. Subjects made movements in a single-joint manipulandum with different loads generated by a torque motor. Some series of movements were performed under entirely known and predictable load conditions. Other series were performed with the same known loads, interspersed, just before movement onset with occasional, unpredictable changes in the magnitude of the load. 2. To move a larger load, subjects
APA, Harvard, Vancouver, ISO, and other styles
31

Kleinhans, Maarten G. "Sorting out river channel patterns." Progress in Physical Geography: Earth and Environment 34, no. 3 (2010): 287–326. http://dx.doi.org/10.1177/0309133310365300.

Full text
Abstract:
Rivers self-organize their pattern/planform through feedbacks between bars, channels, floodplain and vegetation, which emerge as a result of the basic spatial sorting process of wash load sediment and bed sediment. The balance between floodplain formation and destruction determines the width and pattern of channels. Floodplain structure affects the style and rate of channel avulsion once aggradation takes place. Downstream fining of bed sediment and the sediment balance of fines in the pores of the bed sediment provide the ‘template’ or sediment boundary conditions, from which sorting at small
APA, Harvard, Vancouver, ISO, and other styles
32

DoHarris, Lindsay, Amanda Giesler, Brent Humber, Aravin Sukumar, and Luke J. Janssen. "Molecular motors: how to make models that can be used to convey the concept of molecular ratchets and thermal capture." Advances in Physiology Education 35, no. 2 (2011): 213–18. http://dx.doi.org/10.1152/advan.00107.2010.

Full text
Abstract:
A wide variety of cellular processes use molecular motors, including processive motors that move along some form of track (e.g ., myosin with actin, kinesin or dynein with tubulin) and polymerases that move along a template (e.g. , DNA and RNA polymerases, ribosomes). In trying to understand how these molecular motors actually move, many apply their understanding of how man-made motors work: the latter use some form of energy to exert a force or torque on its load. However, quite a different mechanism has been proposed to possibly account for the movement of molecular motors. Rather than hydro
APA, Harvard, Vancouver, ISO, and other styles
33

Tracy, Brian L., William C. Byrnes, and Roger M. Enoka. "Strength training reduces force fluctuations during anisometric contractions of the quadriceps femoris muscles in old adults." Journal of Applied Physiology 96, no. 4 (2004): 1530–40. http://dx.doi.org/10.1152/japplphysiol.00861.2003.

Full text
Abstract:
The greater fluctuations in motor output that are often exhibited by old adults can be reduced with strength training. The purpose of the study was to determine the effect of strength and steadiness training by old adults on fluctuations in force and position during voluntary contractions with the quadriceps femoris muscle. Healthy old adults (65-80 yr) completed 16 wk of heavy-load (80% of maximum, n = 11) strength training, heavy-load steadiness training ( n = 6), or no training ( n = 9). Steadiness training required subjects to match the angular displacement about the knee joint to a consta
APA, Harvard, Vancouver, ISO, and other styles
34

Du, Xian He, and Xin Pu Shen. "Three Dimensional Numerical Simulation of LNG Prestressed Tank." Advanced Materials Research 433-440 (January 2012): 1324–32. http://dx.doi.org/10.4028/www.scientific.net/amr.433-440.1324.

Full text
Abstract:
The purpose of this paper is to observe the distribution of displacement and stress of LNG prestressed tank when under the normal condition and the LNG divulging. The Abaqus software has been used to analyze the three dimensional LNG prestressed tank with finite element method, a numerical simulation is carried out by modeling the prestressed rebar with three dimensional elements, meanwhile, the prestress is applied for rebar with the falling temperature method. By coupling the condition of dead load, live load, prestress, gas pressure, hydraulic pressure and the low temperature, the conclusio
APA, Harvard, Vancouver, ISO, and other styles
35

Chu, Hui Juan, Hong Liang Wei, Jing Zhu, and Chun Ping Nong. "Synthesis and Performance of Molecular Imprinted Polymers as Drug Release Controller." Applied Mechanics and Materials 130-134 (October 2011): 446–49. http://dx.doi.org/10.4028/www.scientific.net/amm.130-134.446.

Full text
Abstract:
Molecular imprinted polymers were synthesized using α-methylacrylacid as monomer, acetylsalicylic acid as template. Polyethylene glycol dimethylacrylate was taken as cross-linker. UV-Vis spectrophotometer was used to detect the drug-loading and releasing performances of these polymers. The studies showed that the imprinted polymers could load more drugs than non-imprinted polymer, and exhibited a slower drug-releasing rate than the latter at pH 7.4. The content of cross-linker had influences on drug-loading amounts. The imprinted polymer released few drugs at the buffer solution of pH 1.2.
APA, Harvard, Vancouver, ISO, and other styles
36

Best, Russ. "Player Heart Rate Responses and Pony External Load Measures during 16-Goal Polo." Data 5, no. 2 (2020): 34. http://dx.doi.org/10.3390/data5020034.

Full text
Abstract:
This dataset provides information pertaining to the spatiotemporal stresses experienced by Polo ponies in play and the cardiovascular responses to these demands by Polo players, during 16-goal Polo. Data were collected by player-worn GPS units and paired heart rate monitors, across a New Zealand Polo season. The dataset comprises observations from 160 chukkas of Open Polo, and is presented as per chukka per game (curated) and in per effort per player (raw) formats. Data for distance, speed, and high intensity metrics are presented and are further categorised into five equine-based speed zones,
APA, Harvard, Vancouver, ISO, and other styles
37

Szalewski, Leszek, Aneta Kamińska, Eliza Wallner, et al. "Degradation of a Micro-Hybrid Dental Composite Reinforced with Polyaramide Fiber under the Influence of Cyclic Loads." Applied Sciences 10, no. 20 (2020): 7296. http://dx.doi.org/10.3390/app10207296.

Full text
Abstract:
Dental composites reinforced with glass fibers have a low tensile modulus and relatively low fatigue resistance. The aim of the study was to analyze the fatigue properties of a dental composite reinforced with polyaramide fibers under the influence of a cyclic, vertical load. For this purpose, we designed a thermoformable template, corresponding to the construction of adhesive bridges in the side section of the jaw. Fifty-four composite samples were made for the study. They were divided into three groups—control (K) and two experimental groups (R1 and R2). The experimental samples were subject
APA, Harvard, Vancouver, ISO, and other styles
38

Qasim, Ahmed, Fadhil Tahir, and Ahmed Alsammak. "Voltage Sag, Voltage Swell and Harmonics Reduction Using Unified Power Quality Conditioner (UPQC) Under Nonlinear Loads." Iraqi Journal for Electrical and Electronic Engineering 17, no. 2 (2021): 140–50. http://dx.doi.org/10.37917/ijeee.17.2.16.

Full text
Abstract:
In light of the widespread usage of power electronics devices, power quality (PQ) has become an increasingly essential factor. Due to nonlinear characteristics, the power electronic devices produce harmonics and consume lag current from the utility. The UPQC is a device that compensates for harmonics and reactive power while also reducing problems related to voltage and current. In this work, a three-phase, three-wire UPQC is suggested to reduce voltage-sag, voltage-swell, voltage and current harmonics. The UPQC is composed of shunt and series Active Power Filters (APFs) that are controlled ut
APA, Harvard, Vancouver, ISO, and other styles
39

Stativko, R. U., G. L. Okuneva, A. O. Tetyukhin, and S. I. Pentyuk. "THE PROSPECTS AND SPECIFICS OF USING THE TASK GENERATOR IN THE EDUCATIONAL PROCESS." Vestnik komp'iuternykh i informatsionnykh tekhnologii, no. 197 (November 2020): 40–46. http://dx.doi.org/10.14489/vkit.2020.11.pp.040-046.

Full text
Abstract:
The requirements of modern society pose to higher educational institutions the task of developing and using new tools, approaches and technologies in the educational process to improve the quality of the educational process. In higher educational institutions, test task generators are part of software systems designed to solve the problem of supporting the educational process. In the presented work, the use of template-based generators is considered. The use of generators changes the workload of both teachers and students. Students can independently check the studied material, repeat it, check
APA, Harvard, Vancouver, ISO, and other styles
40

Stativko, R. U., G. L. Okuneva, A. O. Tetyukhin, and S. I. Pentyuk. "THE PROSPECTS AND SPECIFICS OF USING THE TASK GENERATOR IN THE EDUCATIONAL PROCESS." Vestnik komp'iuternykh i informatsionnykh tekhnologii, no. 197 (November 2020): 40–46. http://dx.doi.org/10.14489/vkit.2020.11.pp.040-046.

Full text
Abstract:
The requirements of modern society pose to higher educational institutions the task of developing and using new tools, approaches and technologies in the educational process to improve the quality of the educational process. In higher educational institutions, test task generators are part of software systems designed to solve the problem of supporting the educational process. In the presented work, the use of template-based generators is considered. The use of generators changes the workload of both teachers and students. Students can independently check the studied material, repeat it, check
APA, Harvard, Vancouver, ISO, and other styles
41

Chang, Kai-Chi, Jian-Chih Chen, I.-Tse Cheng, et al. "Strength and Biocompatibility of Heparin-Based Calcium Phosphate Cement Grafted with Ferulic Acid." Polymers 13, no. 13 (2021): 2219. http://dx.doi.org/10.3390/polym13132219.

Full text
Abstract:
The biomimetic synthesis of carbonated apatites by biomolecule-based templates is a promising way for broadening apatite applications in bone tissue regeneration. In this work, heparin was used as an organic template to prepare uniform carbonate-based apatite nanorods (CHA) and graft ferulic acid (F-CHA) for enhanced bone mineralization. Next, by combining calcium phosphate cement (CPC) with different F-CHA/CPC ratios, a new type of injectable bone cement combined with F-CHA bioactive apatite was developed (CPC + F-CHA). The physicochemical properties, biocompatibility, and mineralization pote
APA, Harvard, Vancouver, ISO, and other styles
42

Wang, Xin Gang, Bao Yan Wang, and Xiu Feng Tan. "Optimization Design on Dynamic Reliability of a Tension Bar." Advanced Materials Research 415-417 (December 2011): 807–12. http://dx.doi.org/10.4028/www.scientific.net/amr.415-417.807.

Full text
Abstract:
This template explains and demonstrates how to prepare your camera-ready paper for Trans Tech Publications. The best is to read these instructions and follow the outline of this text. The variation rules of strength, load, and reliability of mechanical components are studied with a change in time, and a model is established for dynamic reliability of mechanical components under the random load acting. By combining the theory of reliability design with the method of sensitivity analysis, the computational method of dynamic reliability sensitivity design with arbitrary distribution parameter is
APA, Harvard, Vancouver, ISO, and other styles
43

Dmitrovic, Svetlana, Bojan Jokic, Marija Prekajski, et al. "Synthesis and characterization of spider silk calcite composite." Processing and Application of Ceramics 10, no. 1 (2016): 37–40. http://dx.doi.org/10.2298/pac1601037d.

Full text
Abstract:
Spider silk poses excellent mechanical properties, tenacity and elasticity and it has been used as a template for calcite mineralization to improve load bearing strength of osteoconductive calcite. The samples were obtained by mimicking biomineralization for five days in order to follow formation and growth of calcite on the surface of spider silk. Crystal phase was detected by XRD and FTIR spectroscopy. Microstructure, crystal size and its morphology were studied by means of FESEM. After two days of processing, pure calcite phase was obtained, and a size of the formed crystals increased with
APA, Harvard, Vancouver, ISO, and other styles
44

Evans, John J., Maan M. Alkaisi, and Peter H. Sykes. "Tumour Initiation: a Discussion on Evidence for a “Load-Trigger” Mechanism." Cell Biochemistry and Biophysics 77, no. 4 (2019): 293–308. http://dx.doi.org/10.1007/s12013-019-00888-z.

Full text
Abstract:
Abstract Appropriate mechanical forces on cells are vital for normal cell behaviour and this review discusses the possibility that tumour initiation depends partly on the disruption of the normal physical architecture of the extracellular matrix (ECM) around a cell. The alterations that occur thence promote oncogene expression. Some questions, that are not answered with certainty by current consensus mechanisms of tumourigenesis, are elegantly explained by the triggering of tumours being a property of the physical characteristics of the ECM, which is operative following loading of the tumour i
APA, Harvard, Vancouver, ISO, and other styles
45

Peng, Wei, and Zhi Xiang Zha. "Study on Crack Causes and Strengthening Measures of Large Span PC Continuous Box Girder Bridges." Advanced Materials Research 163-167 (December 2010): 3551–54. http://dx.doi.org/10.4028/www.scientific.net/amr.163-167.3551.

Full text
Abstract:
This template Based on cracks observation and finite element analysis of real engineering projects as well as bridge load test after reinforcement, causes and types of cracks in prestressed concrete box girder bridges and treating measurements are systematically studied. The results obtained from the calculation are presented to demonstrate the effect of sensitive factors, such as arrangement of longitudinal prestressed tendons, the magnitude of vertical prestressed force, temperature gradient, etc. The results show that the arrangement of longitudinal prestressed tendons and the magnitude of
APA, Harvard, Vancouver, ISO, and other styles
46

Alarte, Julián, and Josep Silva. "Page-Level Main Content Extraction From Heterogeneous Webpages." ACM Transactions on Knowledge Discovery from Data 15, no. 6 (2021): 1–105. http://dx.doi.org/10.1145/3451168.

Full text
Abstract:
The main content of a webpage is often surrounded by other boilerplate elements related to the template, such as menus, advertisements, copyright notices, and comments. For crawlers and indexers, isolating the main content from the template and other noisy information is an essential task, because processing and storing noisy information produce a waste of resources such as bandwidth, storage space, and computing time. Besides, the detection and extraction of the main content is useful in different areas, such as data mining, web summarization, and content adaptation to low resolutions. This w
APA, Harvard, Vancouver, ISO, and other styles
47

Lv, Hui Qing, and Xiang Wei Zhang. "Finite Element Analysis of Mobile Towers Made of Prefabricated Elements According to Standardization EN1004." Advanced Materials Research 243-249 (May 2011): 552–56. http://dx.doi.org/10.4028/www.scientific.net/amr.243-249.552.

Full text
Abstract:
Working aluminum towers is bound to meet the materials, dimensions, design load, safety and performance requirements of the standard EN 1004. Using the FEA(Finite element analysis) software ANSYS, the mechanical analysis of a 8m height tower made of prefabricated elements, according to standardization EN1004,is done in this paper. The geometric imperfection, Such as inclinations between vertical components the inclination position of 1% and the minor eccentricities of castor should be taken account into the finite element model.This template explains and demonstrates how to prepare your camera
APA, Harvard, Vancouver, ISO, and other styles
48

Liu, Wei. "Experiment of Two Models of Hypoxia Training, and their Influence on Rats’ Cardiovascular System." Advanced Materials Research 926-930 (May 2014): 1096–99. http://dx.doi.org/10.4028/www.scientific.net/amr.926-930.1096.

Full text
Abstract:
This template o observe the influence of living high-training low (Hilo) and intermittent hypoxia training (IHT) on the rats’ cardiovascular system. Male SD rats are randomly divided into four group. The training groups begin to receive training 3 times a week for a total of 4 weeks, incrementing the training load every week. After the experiments, every group is further divided into three groups as quiet group slaughtered,immediately and 3h group slaughtered and tested for their normal blood index and bemodynamic parameters. Both types of hypoxia training can improve the function of rats’ car
APA, Harvard, Vancouver, ISO, and other styles
49

Chacko, Fossy Mary, Ginu Ann George, Jayan M.V., and Prince A. "Improved multifunctional controller for power quality enhancement in grid integrated solar photovoltaic systems." World Journal of Engineering 17, no. 4 (2020): 585–98. http://dx.doi.org/10.1108/wje-12-2019-0356.

Full text
Abstract:
Purpose This paper aims to propose an improved multifunctional control strategy for achieving real, reactive power flow control and the mitigation of power quality issues in grid integrated photovoltaic (GIPV) systems. Design/methodology/approach The paper proposes a dual stage, three phase, multifunctional GIPV system with modified instantaneous reactive power (IRP) theory-based and modified synchronous reference frame (SRF) theory-based control algorithms for reference template generation with continuous load power requirement tracking. The control structure is designed so as to impart virtu
APA, Harvard, Vancouver, ISO, and other styles
50

Asok, Nikhil. "RETENTION OF MINI SCREWS IN ORTHODONTICS – A COMPARATIVE IN VITRO STUDY ON THE VARIABLES." South European Journal of Orthodontics and Dentofacial Research 7, no. 2 (2021): 38–42. http://dx.doi.org/10.5937/sejodr7-26846.

Full text
Abstract:
Objectives: To correlate between the different lengths, angles of insertion and the mini-implant material and find out the most retentive combination.
 Materials and methods: 48 mini-implants (24 Titanium and 24 stainless steel) of lengths 6mm, 8mm and 1.5 mm diameter were inserted into humerus bone of goat at two different angulations, 600 and 900. To insert the mini-implant in the respective angulations, custom made template was made and the angles were confirmed with digital radiographs. Force was applied on to the mini-implants with a universal testing machine and the compressive load
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!