Log in

Relevant bibliographies by topics / Losses of Electrical Machine

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Losses of Electrical Machine'

Author: Grafiati

Published: 4 June 2021

Last updated: 10 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Losses of Electrical Machine.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Losses of Electrical Machine"

1

Shah, S. B., B. Silwal, and A. Lehikoinen. "Effciency of an Electrical Machine in Electric Vehicle Application." Journal of the Institute of Engineering 11, no. 1 (2016): 20–29. http://dx.doi.org/10.3126/jie.v11i1.14692.

Full text

Abstract:

Machines have always made life simpler, directly or indirectly. They have been developed for a very wide range of applications. For the per- formance analysis of any machine, one important parameter to be considered is the machine loss. This consideration has signifcances like determining the effciency of the machine which in turn infuences the operating cost, determining the heating of machine and for accounting the voltage drops or current component associated with the cause of the losses and many more. Losses in electrical machines can be categorized according to the causes or phenomena tha

APA, Harvard, Vancouver, ISO, and other styles

2

Plotnikov, S. M. "Method for determining of the optimal thickness of sheets of magnetic cores of electrical machines by the wattmeter method." Metrologiya, no. 3 (September 27, 2021): 35–47. http://dx.doi.org/10.32446/0132-4713.2021-3-35-47.

Full text

Abstract:

The problem of reducing magnetic losses (no-load losses) in the steel of the magnetic cores of electrical machines is investigated. The tasc of determining the optimal thickness of steel sheets of the magnetic circuit of an electric machine is considered. The criterion for optimality is the minimum power of magnetic losses in steel. Currently, this problem does not have an exact solution due to the fact that the exact ratio of the hysteresis and eddy current components of magnetic losses in steel is unknown. Analyzed the power of magnetic losses in modern electrical machines and devices, depen

APA, Harvard, Vancouver, ISO, and other styles

3

Soomro, Abid, Mustafa E. Amiryar, Daniel Nankoo, and Keith R. Pullen. "Performance and Loss Analysis of Squirrel Cage Induction Machine Based Flywheel Energy Storage System." Applied Sciences 9, no. 21 (2019): 4537. http://dx.doi.org/10.3390/app9214537.

Full text

Abstract:

Flywheel energy storage systems (FESS) are one of the earliest forms of energy storage technologies with several benefits of long service time, high power density, low maintenance, and insensitivity to environmental conditions being important areas of research in recent years. This paper focusses on the electrical machine and power electronics, an important part of a flywheel system, the electrical machine rotating with the flywheel inertia in order to perform charge-discharge cycles. The type of machine used in the electrical drive plays an important role in the characteristics governing elec

APA, Harvard, Vancouver, ISO, and other styles

4

Pfingsten, Georg Von, Andreas Ruf, Simon Steentjes, Marco Hombitzer, David Franck, and Kay Hameyer Rwth. "Operating point resolved loss computation in electrical machines." Archives of Electrical Engineering 65, no. 1 (2016): 73–86. http://dx.doi.org/10.1515/aee-2016-0006.

Full text

Abstract:

AbstractMagnetic circuits of electromagnetic energy converters, such as electrical machines, are nowadays highly utilized. This proposition is intrinsic for the magnetic as well as the electric circuit and depicts that significant enhancements of electrical machines are difficult to achieve in the absence of a detailed understanding of underlying effects. In order to improve the properties of electrical machines the accurate determination of the locally distributed iron losses based on idealized model assumptions solely is not sufficient. Other loss generating effects have to be considered and

APA, Harvard, Vancouver, ISO, and other styles

5

Mezhov, Igor, Margarita Kiseleva, and Alexey Chuvaev. "Assessment of Administrative Labor Organization in Electrical Engineering." Applied Mechanics and Materials 792 (September 2015): 439–45. http://dx.doi.org/10.4028/www.scientific.net/amm.792.439.

Full text

Abstract:

The article is devoted to the problems of management, managerial staff performance, and the production system organized nature in electrical engineering. Managers often appear to perform the work of low-skilled employees, which results in significant losses. The study presents the options to account and minimize the losses. Moreover, the proposed method is time and cost efficient and could be easily disseminated in electric machine industry.

APA, Harvard, Vancouver, ISO, and other styles

6

Yadav, Rakhi, and Yogendra Kumar. "Detection of Non-Technical Losses in Electric Distribution Network by Applying Machine Learning and Feature Engineering." Journal Européen des Systèmes Automatisés 54, no. 3 (2021): 487–93. http://dx.doi.org/10.18280/jesa.540312.

Full text

Abstract:

Non-technical losses (NTL), which occur up to 40% of the total electric transmission and distribution power, create many challenges worldwide. These losses have a severe impact on distribution utilities and adversely affect the performance of electrical distribution networks. Furthermore, the depreciation of these NTL reduces the requirement of new power plants to fulfill the demand-supply gap. Hence, NTL is an emerging research area for electrical engineers. This paper proposed a model for the detection of non-technical losses based on machine learning and feature engineering. Experimental re

APA, Harvard, Vancouver, ISO, and other styles

7

Rens, Jan, Lode Vandenbossche, and Ophélie Dorez. "Iron Loss Modelling of Electrical Traction Motors for Improved Prediction of Higher Harmonic Losses." World Electric Vehicle Journal 11, no. 1 (2020): 24. http://dx.doi.org/10.3390/wevj11010024.

Full text

Abstract:

A Finite Element (FE) modelling approach is presented to account for the core losses in electrical machines that are generated by higher harmonic frequencies, for example those caused by Pulse Width Modulation (PWM) switching or by space harmonics due to the machine geometry. The model builds further on a post-processing calculation tool that was recently developed to take into account the magnetic skin effect in electrical steel laminations at high frequencies, and extends this by a more detailed loss analysis of the minor hysteresis loops that are caused by the higher harmonics. Further, the

APA, Harvard, Vancouver, ISO, and other styles

8

Szucs, Aron, Zlatko Kolondzovski, Jan Westerlund, and Juha Vahala. "Diamond enriched lamination and winding insulation for electrical machines." COMPEL - The international journal for computation and mathematics in electrical and electronic engineering 38, no. 4 (2019): 1245–52. http://dx.doi.org/10.1108/compel-10-2018-0397.

Full text

Abstract:

Purpose The thermal management of electrical insulations poses a challenge in electrical devices as electrical insulators are also thermal insulators. Diamond is the best solid electrical insulator and thermal conductor. This can lead to a paradigm change for electrical machine winding and lamination insulation design and thermal management. The paper introduces these techniques and discusses its effect for the design of electrical machines and its potential consequences for electromagnetic analysis, for example, in multi-physics modelling. The diamond winding insulation is patent-pending, but

APA, Harvard, Vancouver, ISO, and other styles

9

Karthaus, Jan, Simon Steentjes, Nora Leuning, and Kay Hameyer. "Effect of mechanical stress on different iron loss components up to high frequencies and magnetic flux densities." COMPEL - The international journal for computation and mathematics in electrical and electronic engineering 36, no. 3 (2017): 580–92. http://dx.doi.org/10.1108/compel-09-2016-0416.

Full text

Abstract:

Purpose The purpose of this paper is to study the variation of the specific iron loss components of electrical steel sheets when applying a tensile mechanical load below the yield strength of the material. The results provide an insight into the iron loss behaviour of the laminated core of electrical machines which are exposed to mechanical stresses of diverse origins. Design/methodology/approach The specific iron losses of electrical steel sheets are measured using a standardised single-sheet tester equipped with a hydraulic pressure cylinder which enables application of a force to the specim

APA, Harvard, Vancouver, ISO, and other styles

10

Boguslawsky, Ilya, and Valery Zaboin. "The ways to increase reliability of work of powerful electrical machines in autonomous electric networks." MATEC Web of Conferences 245 (2018): 07019. http://dx.doi.org/10.1051/matecconf/201824507019.

Full text

Abstract:

The influence of the harmonic composition of the stator current on the permissible power of an electric machine during its operation in an autonomous nonlinear network is considered. A generalizing equation is proposed for calculating this power, taking into account an increase in the electric losses in the stator winding and losses in the steel of the machine. The analysis of the causes of voltage drop at the terminals of an autonomous generator is made and practical recommendations for its reduction are given for an unexpected change in the load of the generator. The main purpose of investig

APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Losses of Electrical Machine"

1

Bourchas, Konstantinos. "Manufacturing Effects on Iron Losses in Electrical Machines." Thesis, KTH, Elektrisk energiomvandling, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-172373.

Full text

Abstract:

In this master thesis, the magnetic properties of SiFe laminations after cutting and welding are studied. The permeability and the iron loss density are investigated since they are critical characteristics for the performance of electrical machines. The magnetic measurements are conducted on an Epstein frame for sinusoidal variations of the magnetic ux density at frequencies of 50, 100 and 200 Hz, according to IEC 404-2. Mechanical cutting with guillotine and cutting by means of ber and CO2 laser are performed. The inuence of the ber laser settings is also investigated. Especially the assistin

APA, Harvard, Vancouver, ISO, and other styles

2

Wills, Dominic. "Methods to quantify and reduce rotor losses in a solid rotor yoke permanent magnet machine." Thesis, Stellenbosch : University of Stellenbosch, 2010. http://hdl.handle.net/10019.1/4014.

Full text

Abstract:

Thesis (PhD (Electrical and Electronic Engineering))--University of Stellenbosch, 2010.<br>ENGLISH ABSTRACT: Certain types of electric machines are particularly susceptible to the proliferation of eddy currents flowing within the solid conducting regions in the rotor. Single-layer, non-overlapping windings within uneven open slots are some stator properties that can produce damaging, asynchronous magnetic field harmonics which manifest in the rotor as eddy currents. The ohmic losses caused by these eddy currents are a source of inefficiency and can cause a marked increase in the temperatu

APA, Harvard, Vancouver, ISO, and other styles

3

Krings, Andreas. "Iron Losses in Electrical Machines - Influence of Material Properties, Manufacturing Processes, and Inverter Operation." Doctoral thesis, KTH, Elektrisk energiomvandling, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-145243.

Full text

Abstract:

As the major electricity consumer, electrical machines play a key role for global energy savings. Machine manufacturers put considerable efforts into the development of more efficient electrical machines for loss reduction and higher power density achievements. A consolidated knowledge of the occurring losses in electrical machines is a basic requirement for efficiency improvements. This thesis deals with iron losses in electrical machines. The major focus is on the influences of the stator core magnetic material due to the machine manufacturing process, temperature influences, and the impact

APA, Harvard, Vancouver, ISO, and other styles

4

Hogben, Philippa Jane. "Caluculation of iron losses in induction machines." Thesis, University of Cambridge, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.337983.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Tekgun, Burak. "Analysis, Measurement and Estimation of the Core Losses in Electrical Machines." University of Akron / OhioLINK, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=akron1481047992739036.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Lamperth, Michael. "An investigation into the mechanical and electrical losses of permanent magnet disc machines." Thesis, Imperial College London, 2000. http://hdl.handle.net/10044/1/8648.

Full text

Abstract:

The subject of the thesis is the investigation of the loss-mechanisms in high-speed permanent magnet disc generators. Such electrical machines can be directly coupled to gas turbine engines and run at speeds of up to 60000 revolutions per minute. The work focuses particularly on the losses occurring in the stator of the machine, which are: 1. Ohmic resistance losses 2. Eddy current losses 3. Circulating current losses 4. Pumping losses of coolant fluid Numerical modelling was used to gain a theoretical understanding of the loss-mechanisms involved. Validation of these results was carried out b

APA, Harvard, Vancouver, ISO, and other styles

7

Pham-Dinh, Truc. "Direct torque control of induction machines considering the iron losses." Thesis, Liverpool John Moores University, 2003. http://researchonline.ljmu.ac.uk/4969/.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Irenji, Neamat Taghizadeh. "Calculation of electromagnetic rotor losses in high-speed permanent magnet machines." Thesis, University of Southampton, 1998. https://eprints.soton.ac.uk/47948/.

Full text

Abstract:

High-speed permanent magnet machines are currently being developed for a number of applications including gas-turbine generator sets and machine tools. Due to the high peripheral speed of the rotor and the relatively high conductivity of the magnets used, rotor eddy current loss can be substantial. Quite low levels of loss may present a serious problem if rotor cooling is poor. The accurate calculation of these losses, and appreciation of their dependence on machine parameters, are therefore of great importance for reasons of both efficiency and temperature rise. In this, thesis, a method has

APA, Harvard, Vancouver, ISO, and other styles

9

Manyage, Marubini J. "Application of improved core loss formulations to machine design." Doctoral thesis, University of Cape Town, 2008. http://hdl.handle.net/11427/5173.

Full text

Abstract:

Includes abstract.<br>Includes bibliographical references (p. 117-120).<br>The primary focus of this thesis is in core loss measurement and modeling techniques and their impact in machine design. In practice, steel manufacturers usually supply core loss data either at 50/60Hz, 1.5T or curves (core loss vs. flux density) at 50 and/or 60Hz. There is growing need for lamination characterization at high flux densities (2T) and high frequencies (3.2 kHz) for novel electric machine designs operating at high speeds. The core loss measurement concept is reviewed first. Two core loss measurement formul

APA, Harvard, Vancouver, ISO, and other styles

10

Shisha, Samer. "Analysis of Inverter-fed Losses on the Solid Rotor of Large-scale Synchronous Machines." Licentiate thesis, KTH, Elektriska maskiner och effektelektronik (stängd 20110930), 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-64142.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Losses of Electrical Machine"

1

Kuale, P. A. The electrical machine. Published by the Nigerian Society of Enginneers ( Eectrical Devision), 2002.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Franchi, Claiton Moro. Electrical Machine Drives. CRC Press, 2019. http://dx.doi.org/10.1201/b22314.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Hackmann, Willem Dirk. John Wesley and his electrical machine. John Wesley's House and the Museum of Methodism, 2003.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

Electrical machine analysis using finite elements. Talor & Francis, 2005.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

Pyrhöonen, Juha, Valéria Hrabovcová, and Scott R Semken. Electrical Machine Drives Control: An Introduction. John Wiley & Sons Ltd, 2016. http://dx.doi.org/10.1002/9781119260479.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

1963-, Chen Meng-Jen, ed. Three-phase electrical machine systems: Computer simulation. Research Studies Press, 1993.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

Yu, Qiang, Xuesong Wang, Yuhu Cheng, and Lisi Tian. Analysis and Mathematical Models of Canned Electrical Machine Drives. Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-2745-2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Myles, White John, ed. Machine learning for email. O'Reilly Media, 2011.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

Gao, Jingde. AC Machine Systems: Mathematical Model and Parameters, Analysis, and System Performance. Springer-Verlag Berlin Heidelberg, 2009.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

Vukosavić, Slobodan N. Electrical Machines. Springer New York, 2013.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Losses of Electrical Machine"

1

Młot, Adrian, Mariusz Korkosz, and Marian Łukaniszyn. "Investigation of End Winding Proximity Losses in a High-Speed PM Machine." In Lecture Notes in Electrical Engineering. Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-11248-0_14.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Drubel, Oliver. "Additional Losses Due to Higher Voltage Harmonics." In Converter Applications and their Influence on Large Electrical Machines. Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-36282-8_4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Banajyoti, Adyasha, and C. N. Bhende. "Performance Evaluation of Different Machine Learning Techniques for Detection of Non-technical Loss." In Lecture Notes in Electrical Engineering. Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-33-4866-0_11.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Tsekouras, George J., Fotis D. Kanellos, Nikos E. Mastorakis, and Valeri Mladenov. "Optimal Operation of Electric Power Production System without Transmission Losses Using Artificial Neural Networks Based on Augmented Lagrange Multiplier Method." In Artificial Neural Networks and Machine Learning – ICANN 2013. Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-40728-4_73.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Weik, Martin H. "electrical accounting machine." In Computer Science and Communications Dictionary. Springer US, 2000. http://dx.doi.org/10.1007/1-4020-0613-6_5865.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Üçtuğ, M. Yildirim. "Generalized Machine Theory." In Modern Electrical Drives. Springer Netherlands, 2000. http://dx.doi.org/10.1007/978-94-015-9387-8_17.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Janowski, Tadeusz, and Ryszard Goleman. "Additional Losses in Frequency Tripler Windings." In Electromagnetic Fields in Electrical Engineering. Springer US, 1988. http://dx.doi.org/10.1007/978-1-4613-0721-1_21.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Beilis, Isak. "Electrode Energy Losses. Effective Voltage." In Plasma and Spot Phenomena in Electrical Arcs. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-44747-2_10.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Beilis, Isak. "Electrode Erosion. Total Mass Losses." In Plasma and Spot Phenomena in Electrical Arcs. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-44747-2_8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Franchi, Claiton Moro. "Electric Motors." In Electrical Machine Drives. CRC Press, 2019. http://dx.doi.org/10.1201/b22314-1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Losses of Electrical Machine"

1

Grigorev, Maksim A., Artyom A. Gryzlov, Azaliya A. Pushkina, and Sergey S. Bukhanov. "Mechatronic Modules with Minimal Losses Electrical Machine." In 2020 IEEE Conference of Russian Young Researchers in Electrical and Electronic Engineering (EIConRus). IEEE, 2020. http://dx.doi.org/10.1109/eiconrus49466.2020.9039445.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Sleiti, Ahmad K. "Transient Thermal Analysis of Electrical Machine." In ASME 2009 International Mechanical Engineering Congress and Exposition. ASMEDC, 2009. http://dx.doi.org/10.1115/imece2009-11021.

Full text

Abstract:

Transient thermal analysis of electric machine under realistic operation conditions and thermal losses is studied. A symmetrical portion of the stator and rotor is modeled and all thermal losses and cooling boundary conditions are applied according to operational duty cycle. It is found that there is a temperature gradient across the stator of more than 30 °C, across the rotor of more than 70 °C and across the whole machine of more than 100 °C. These temperature gradients could cause high thermal stresses and lead to severe reduction in the machine life. It is extremely important in future des

APA, Harvard, Vancouver, ISO, and other styles

3

Ionita, Valentin, Lucian Petrescu, Emil Cazacu, Eros-Alexandru Patroi, and Eugen Manta. "Improved prediction of hysteresis losses in electrical machine cores." In 2017 International Conference on Modern Power Systems (MPS). IEEE, 2017. http://dx.doi.org/10.1109/mps.2017.7974403.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Mendes, E. "Losses minimization of a field oriented controlled induction machine." In Seventh International Conference on Electrical Machines and Drives. IEE, 1995. http://dx.doi.org/10.1049/cp:19950885.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Mach, M., and V. Hajek. "Dependence of small induction machine losses on load." In 2016 IEEE 16th International Conference on Environment and Electrical Engineering (EEEIC). IEEE, 2016. http://dx.doi.org/10.1109/eeeic.2016.7555603.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Schofield, N. "Parasitic rotor losses in a brushless permanent magnet traction machine." In Eighth International Conference on Electrical Machines and Drives. IEE, 1997. http://dx.doi.org/10.1049/cp:19971067.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Zhou, Xiang, Shangyan Zou, Wayne W. Weaver, and Ossama Abdelkhalik. "Control of Wave Energy Converter With Losses in Electrical Power Take-Off System." In ASME 2021 Power Conference. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/power2021-64938.

Full text

Abstract:

Abstract A permanent magnet linear electrical machine power takeoff (PTO) unit is simulated on the direct drive wave energy converter in this paper, which is controlled to provide the required reactive power. A shape-based control is implemented to maximize the wave energy production (mechanical PTO) with the limiting constraints on the electric drive. Further, the linear electrical machine design is optimized such that the electrical power output is maximized (e.g., reduced power losses). The numerical simulations are conducted using MATLAB/Simulink and the Simscape toolbox. Linear wave theor

APA, Harvard, Vancouver, ISO, and other styles

8

Belahcen, Anouar. "Losses in an eccentric rotor induction machine fed from frequency converter." In 2008 International Conference on Electrical Machines (ICEM). IEEE, 2008. http://dx.doi.org/10.1109/icelmach.2008.4800261.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Moulahoum, Samir, and Omar Touhami. "A Saturated Induction Machine Model with Series Iron Losses Resistance." In 2007 International Conference on Power Engineering, Energy and Electrical Drives. IEEE, 2007. http://dx.doi.org/10.1109/powereng.2007.4380141.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Polinder, H. "Eddy-current losses in the permanent magnets of a PM machine." In Eighth International Conference on Electrical Machines and Drives. IEE, 1997. http://dx.doi.org/10.1049/cp:19971054.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Losses of Electrical Machine"

1

Research Institute (IFPRI), International Food Policy. Predicting high-magnitude, low-frequency crop losses using machine learning: An application to cereal crops in Ethiopia. International Food Policy Research Institute, 2018. http://dx.doi.org/10.2499/1046080770.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Rodriguez-Mateos, F., L. Coull, K. Dahlerup-Petersen, et al. Electrical performance of a string of magnets representing a half-cell of the LHC machine. Office of Scientific and Technical Information (OSTI), 1995. http://dx.doi.org/10.2172/102202.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Pshezhetskiy, Dmitry, Tanveer Alam, and Heba Alshaker. Unsynchronised Cardioversion as a Cause of Ventricular Tachycardia in a Patient with Atrial Fibrillation. Nature Library, 2020. http://dx.doi.org/10.47496/nl.ccr.2020.01.02.

Full text

Abstract:

Background: Synchronised cardioversion (SC) is used to terminate tachycardic arrhythmia by applying electric current to the thorax. SC is synchronised to the R wave of the cardiac cycle and ventricular tachycardia (VT) or ventricular fibrillation (VF) can occur if an electrical shock is provided in a nonsynchronised way. Case Presentation: Here we present a case of a 66-year-old man who had elective cardioversion for atrial fibrillation worsened by severe left ventricular impairment. A manual defibrillator was used for the cardioversion, which, after the first synchronised shock, reverted to d

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!