Log in

Relevant bibliographies by topics / Luting Agents / Journal articles

To see the other types of publications on this topic, follow the link: Luting Agents.

Journal articles on the topic 'Luting Agents'

Author: Grafiati

Published: 3 June 2025

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Luting Agents.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Kulkarni, Prasad, and S. Raghavendra Jayesh. "Luting Agents used in Prosthodontics." International Journal of Science and Research (IJSR) 12, no. 9 (2023): 1169–72. http://dx.doi.org/10.21275/sr23911124906.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Spazzin, AO, GB Guarda, A. Oliveira-Ogliari, FB Leal, L. Correr-Sobrinho, and RR Moraes. "Strengthening of Porcelain Provided by Resin Cements and Flowable Composites." Operative Dentistry 41, no. 2 (2016): 179–88. http://dx.doi.org/10.2341/15-025-l.

Full text

Abstract:

SUMMARY This study evaluated the effect of mechanical properties of resin-based luting agents on the strength of resin-coated porcelain. The luting agents tested were two flowable resin composites (Filtek Z350 Flow and Tetric-N Flow), a light-cured resin cement (Variolink Veneer [VV]), and a dual-cured resin cement (Variolink II) in either light-cured (base paste) or dual-cured (base + catalyst pastes [VD]) mode. Flexural strength (σf) and modulus of elasticity (Ef) of the luting agents were measured in three-point bending mode (n=5). Porcelain discs (Vita VM7) were tested either untreated (co

APA, Harvard, Vancouver, ISO, and other styles

3

Pameijer, Cornelis H. "A Review of Luting Agents." International Journal of Dentistry 2012 (2012): 1–7. http://dx.doi.org/10.1155/2012/752861.

Full text

Abstract:

Due to the availability of a large number of luting agents (dental cements) proper selection can be a daunting task and is usually based on a practitioner’s reliance on experience and preference and less on in depth knowledge of materials that are used for the restoration and luting agent properties. This review aims at presenting an overview of current cements and discusses physical properties, biocompatibility and other properties that make a particular cement the preferred choice depending on the clinical indication. Tables are provided that outline the different properties of the generic c

APA, Harvard, Vancouver, ISO, and other styles

4

Barath, V. S., F. J. Faber, S. Westland, and W. Niedermeier. "Spectrophotometric Analysis of All-ceramic Materials and Their Interaction with Luting Agents and Different Backgrounds." Advances in Dental Research 17, no. 1 (2003): 55–60. http://dx.doi.org/10.1177/154407370301700113.

Full text

Abstract:

In this study, two All-Ceramic (AC) materials—Empress 2 (EMP) (Ivoclar Vivadent AG, Schaan, Liechtenstein) and In-Ceram ALUMINA (ICA) (Vita Zahnfabrik, Bad Säckingen, Germany)—were analyzed, along with the effects of 3 luting agents— viz. Zinc Phosphate cement (ZNPO, PhospaCEM PL, Ivoclar Vivadent AG, Schaan, Liechtenstein), Glass Ionomer Cement (GIC, Ketac-Cem Radiopaque, ESPE Dental AG, Seefeld, Germany), and Compolute (COMP, ESPE Dental AG, Seefeld, Germany)—on the final color, using the CIELab system. Color differences (DeltaL, Deltaa, Deltab, and DeltaE) were calculated for samples with l

APA, Harvard, Vancouver, ISO, and other styles

5

Dingari, Mamatha, Sujesh M, Ravi Kumar C, Rajanikanth A, Chalapathi Rao Duggineni, and Harilal G. "A comprehensive review on bonding between monolithic ceramics and tooth structure with different adhesive agents." International Journal of Dental Materials 04, no. 02 (2022): 46–50. http://dx.doi.org/10.37983/ijdm.2022.4205.

Full text

Abstract:

Reliable bonding between the prepared tooth and monolithic ceramics can be achieved by various luting agents available on the market. The selection of luting agent and cementation technique plays an important role in the success of the restoration. With the advent of resin-based adhesive systems as luting agents, clinicians' perspectives have changed to a more conservative approach. Recent systems, chemically adhere athe crowns to the prepared tooth structure showing higher bond strength. To reach the aesthetic demands of the patients, all-ceramic restorations were considered over metal-cerami

APA, Harvard, Vancouver, ISO, and other styles

6

Dingari, Mamatha, Sujesh M, Ravi Kumar C, Rajanikanth A, Chalapathi Rao Duggineni, and Harilal G. "A comprehensive review on bonding between monolithic ceramics and tooth structure with different adhesive agents." International Journal of Dental Materials 04, no. 02 (2022): 46–50. http://dx.doi.org/10.37983/ijdm.2022.4205.

Full text

Abstract:

Reliable bonding between the prepared tooth and monolithic ceramics can be achieved by various luting agents available on the market. The selection of luting agent and cementation technique plays an important role in the success of the restoration. With the advent of resin-based adhesive systems as luting agents, clinicians' perspectives have changed to a more conservative approach. Recent systems, chemically adhere athe crowns to the prepared tooth structure showing higher bond strength. To reach the aesthetic demands of the patients, all-ceramic restorations were considered over metal-cerami

APA, Harvard, Vancouver, ISO, and other styles

7

Moris, Izabela Cristina Maurício, Juliana Elias de Oliveira, Adriana Cláudia Lapria Faria, Ricardo Faria Ribeiro, and Renata Cristina Silveira Rodrigues. "In Vitro Fit and Cementation Resistance of Provisional Crowns for Single Implant-Supported Restorations." Brazilian Dental Journal 26, no. 5 (2015): 468–73. http://dx.doi.org/10.1590/0103-6440201300289.

Full text

Abstract:

Abstract: This study aimed to verify marginal fit and the effect of cement film thickness standardization on retention of provisional crowns made with prefabricated acrylic cylinders on abutments, using two temporary luting agents subjected or not to mechanical cycling. Provisional crowns were made from bis-acryl (Luxatemp Fluorescence) or methyl methacrylate (Duralay) resins on acrylic cylinders and marginal fit and cement film thickness were evaluated. For retention evaluation, crowns were cemented with two temporary luting agents: non-eugenol zinc oxide (Tempbond NE) or calcium hydroxide-ba

APA, Harvard, Vancouver, ISO, and other styles

8

Alsahli, Ahmad, Mirza Rustum Baig, Jagan Kumar Baskaradoss, Shoug Alsanea, and Athoub AlMousawi. "Factors Influencing the Selection of Materials and Luting Agents for Single-Crown Restorations." Dentistry Journal 13, no. 5 (2025): 207. https://doi.org/10.3390/dj13050207.

Full text

Abstract:

Objective: Selecting suitable materials and luting agents for single crowns is critical yet challenging, as dentists must consider different factors. This study aimed to assess dentists’ preferences for materials and luting agents under different clinical conditions and evaluate the nonclinical factors influencing their preferences. Methods: A paper-based survey supplemented with photographs illustrating anterior and posterior single-crown preparation designs was used, incorporating three clinical scenarios for each as examples. Participants provided demographic data and were asked to select t

APA, Harvard, Vancouver, ISO, and other styles

9

Yoshida, Keiichi, Kazunori Funaki, Mika Tanagawa, Hideo Matsumura, Takuo Tanaka, and Mitsuru Atsuta. "Properties of Commercially Available Luting Agents." Nihon Hotetsu Shika Gakkai Zasshi 39, no. 1 (1995): 35–40. http://dx.doi.org/10.2186/jjps.39.35.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Hondrum, Steven O. "Storage stability of dental luting agents." Journal of Prosthetic Dentistry 81, no. 4 (1999): 464–68. http://dx.doi.org/10.1016/s0022-3913(99)80015-8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Jivraj, Sajid A., Tae Hyung Kim, and Terry E. Donovan. "Selection of Luting Agents, Part 1." Journal of the California Dental Association 34, no. 2 (2006): 149–60. http://dx.doi.org/10.1080/19424396.2006.12222183.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Kim, Tae Hyung, Sajid A. Jivraj, and Terry E. Donovan. "Selection of Luting Agents: Part 2." Journal of the California Dental Association 34, no. 2 (2006): 161–66. http://dx.doi.org/10.1080/19424396.2006.12222184.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Aleisa, Khalil. "Bond Strength of Overdenture Locator Posts Cemented with Seven Luting Agents." Journal of Contemporary Dental Practice 14, no. 4 (2013): 675–80. http://dx.doi.org/10.5005/jp-journals-10024-1384.

Full text

Abstract:

ABSTRACT Statement of the problem Post retention is crucial factor in restoration survival. Posts are commonly failed due to loss of retention. It is unknown which luting agents would provide the maximum bond strength for Locator overdenture posts. Aim The aim of this study was to evaluate the bond retentive strengths of Locator overdenture posts cemented with 7 luting agents. Materials and methods One hundred and five single rooted human teeth were decoronated and randomly assigned to 7 groups (n = 15). Post spaces were prepared with Locator post drills to the depth of 6 mm. The Locator posts

APA, Harvard, Vancouver, ISO, and other styles

14

AlJulayfi, Ibrahim S. "Effectiveness of Different Luting Agents on Retention of Implant-Supported Crowns." Journal of Pharmacy and Bioallied Sciences 17, Suppl 2 (2025): S1168—S1172. https://doi.org/10.4103/jpbs.jpbs_1545_24.

Full text

Abstract:

ABSTRACT Background and Objective: Dental implantology, a pivotal aspect of restorative dentistry, has seen significant advancements, including the widespread use of implant-supported crowns. The choice of luting agent in these restorations plays a crucial role in determining their long-term success. Therefore, this study aimed to comprehensively investigate and compare the effectiveness of different luting agents. Methodology: In this prospective, randomized controlled trial, sixty participants requiring single-tooth implant-supported crowns were randomly assigned to three groups: resin-based

APA, Harvard, Vancouver, ISO, and other styles

15

D'Arcangelo, C., F. De Angelis, M. D'Amario, S. Zazzeroni, C. Ciampoli, and S. Caputi. "The Influence of Luting Systems on the Microtensile Bond Strength of Dentin to Indirect Resin-based Composite and Ceramic Restorations." Operative Dentistry 34, no. 3 (2009): 328–36. http://dx.doi.org/10.2341/08-101.

Full text

Abstract:

Clinical Relevance Compared to self-etch and self-adhesive luting systems, the two etch-and-rinse luting agents evaluated in the current study provided more reliable bonding when used to bond indirect resin-based composite restorations to sound dentin. On the contrary, the self-adhesive luting system showed the highest mean bond strength for the cementation of glass ceramic restorations.

APA, Harvard, Vancouver, ISO, and other styles

16

Rosas, Jose, Frank Mayta-Tovalino, Violeta Malpartida-Carrillo, Arnaldo Munive Degregori, Roman Mendoza, and Maria E. Guerrero. "Effect of Abutment Geometry and Luting Agents on the Vertical Marginal Discrepancy of Cast Copings on Implant Abutments: An In Vitro Study." International Journal of Dentistry 2021 (June 21, 2021): 1–7. http://dx.doi.org/10.1155/2021/9950972.

Full text

Abstract:

Aim. Vertical marginal discrepancy (VMD) influences the success of implant-supported restorations. However, there is little literature that has investigated the influence of geometry and cementing agent on changes in VMD of metal copings on implant abutments. The objective was to evaluate the effect of the geometry of the abutment and cementing agents on VMD. Methods. Cast copings were cemented on implant abutments customized cylindrical (4, 5.5, and 7 mm) and on hexagonal implant abutments (4 mm) cemented or uncemented molded copings were placed (n = 4, totally 64 samples) with different luti

APA, Harvard, Vancouver, ISO, and other styles

17

Santana, VB, RS de Alexandre, JA Rodrigues, C. Ely, and AF Reis. "Effects of Immediate Dentin Sealing and Pulpal Pressure on Resin Cement Bond Strength and Nanoleakage." Operative Dentistry 41, no. 2 (2016): 189–99. http://dx.doi.org/10.2341/15-150-l.

Full text

Abstract:

SUMMARY Objective: The object of this study was to evaluate the simulated pulpal pressure (SPP) and immediate dentin sealing technique (IDS) effects on the microtensile bond strength (μTBS) and nanoleakage of interfaces produced by different luting agents. Methods and Materials: Two self-adhesive luting agents (RelyX Unicem [UC] and Clearfil SA Luting [SA]) and two conventional luting agents (Rely X ARC [RX] and Panavia F [PF]) were evaluated. Eighty human molars were divided in four groups according to luting agents. Each group was subdivided according to SPP (with or without) and dentin seal

APA, Harvard, Vancouver, ISO, and other styles

18

Mash, L. K., C. K. Beninger, J. T. Bullard, and R. S. Staffanou. "Leakage of various types of luting agents." Journal of Prosthetic Dentistry 66, no. 6 (1991): 763–66. http://dx.doi.org/10.1016/0022-3913(91)90411-o.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

White, Shane N., and Zhaokun Yu. "Film thickness of new adhesive luting agents." Journal of Prosthetic Dentistry 67, no. 6 (1992): 782–85. http://dx.doi.org/10.1016/0022-3913(92)90582-u.

Full text

APA, Harvard, Vancouver, ISO, and other styles

20

SÜMER, Ebru, and Yalçın DEĞER. "Contemporary Permanent Luting Agents Used in Dentistry: A Literature Review." International Dental Research 1, no. 1 (2011): 26. http://dx.doi.org/10.5577/intdentres.2011.vol1.no1.5.

Full text

Abstract:

Dental cements are widely used in dentistry. Base material, temporary filling material and luting agents can all have different clinical applications. Different types of cement have also been developed for various orthodontic and endodontic treatments. In literature it is still argued that there is not ideal cement answering all purposes yet, so different materials are required for the comprehensive patient treatments and it is not always that easy to make the best choice. The aim of this article is to provide a clinically relevant discussion of contemporary permanent luting agents

APA, Harvard, Vancouver, ISO, and other styles

21

Marchan, Shivaughn M., Larry Coldero, Daniel White, William A. J. Smith, and Reisha N. Rafeek. "Cusp Fracture Resistance of Maxillary Premolars Restored with the Bonded Amalgam Technique Using Various Luting Agents." International Journal of Dentistry 2009 (2009): 1–4. http://dx.doi.org/10.1155/2009/946830.

Full text

Abstract:

Objective. This in vitro study uses measurements of fracture resistance to compare maxillary premolars restored with the bonded amalgam technique using a new resin luting cement, glass ionomer, and resin-modified glass ionomer as the bonding agents.Materials. Eighty-five sound maxillary premolars were selected and randomly assigned to one of five test groups of 17 teeth each. One group of intact teeth served as the control. The remaining groups were prepared to a standard cavity form relative to the dimensions of the overall tooth and restored with amalgam alone or a bonded amalgam using one o

APA, Harvard, Vancouver, ISO, and other styles

22

Beketova, Anastasia, Emmanouil-Georgios C. Tzanakakis, Evangelia Vouvoudi, et al. "Zirconia Nanoparticles as Reinforcing Agents for Contemporary Dental Luting Cements: Physicochemical Properties and Shear Bond Strength to Monolithic Zirconia." International Journal of Molecular Sciences 24, no. 3 (2023): 2067. http://dx.doi.org/10.3390/ijms24032067.

Full text

Abstract:

Nanofillers in resin materials can improve their mechanical and physicochemical properties. The present work investigated the effects of zirconia nanoparticles (NPs) as fillers in commercial dental luting cements. Two dual-cured self-adhesive composites and one resin modified glass ionomer (RMGI) luting cement were employed. Film thickness (FT), flexural strength (FS), water sorption (Wsp), and shear bond strength (SBS) to monolithic zirconia were evaluated according to ISO 16506:2017 and ISO 9917-2:2017, whereas polymerization progress was evaluated with FTIR. Photopolymerization resulted in

APA, Harvard, Vancouver, ISO, and other styles

23

Correr-Sobrinho, Lourenço, Daniele M. da Silveira-Pedrosa, Luis RM Martins, et al. "Push-out Bond Strength of Glass Fiber Posts Cemented in Weakened Roots with Different Luting Agents." Journal of Contemporary Dental Practice 17, no. 2 (2016): 119–24. http://dx.doi.org/10.5005/jp-journals-10024-1813.

Full text

Abstract:

ABSTRACT Aim To evaluate the push-out bond strength (BS) of direct anatomic posts (DAPs) and conventional fiber posts (CFPs) cemented with different luting agents in different thirds of flared root canals. Materials and methods A total of 60 human single-rooted canine teeth were transversally sectioned 16 mm from the radicular apex. After endodontic treatment, canals were flared with diamond burs. Samples were divided into six groups according to post type and luting agent: DAP and RelyX U100 (RXU); DAP and RelyX ARC (RXA); DAP and RelyX Luting 2 (RXL); CFP and RXU; CFP and RXA; CFP and RXL. R

APA, Harvard, Vancouver, ISO, and other styles

24

Peutzfeldt, A., A. Sahafi, and S. Flury. "Bonding of Restorative Materials to Dentin With Various Luting Agents." Operative Dentistry 36, no. 3 (2011): 266–73. http://dx.doi.org/10.2341/10-236-l.

Full text

Abstract:

SUMMARY The aim was to compare eight types of luting agents when used to bond six indirect, laboratory restorative materials to dentin. Cylinders of the six restorative materials (Esteticor Avenir [gold alloy], Tritan [titanium], NobelRondo [feldspathic porcelain], Finesse All-Ceramic [leucite-glass ceramic], Lava [zirconia], and Sinfony [resin composite]) were ground and air-abraded. Cylinders of feldspathic porcelain and glass ceramic were additionally etched with hydrofluoric acid and were silane-treated. The cylinders were luted to ground human dentin with eight luting agents (DeTrey Zinc

APA, Harvard, Vancouver, ISO, and other styles

25

Babu, Mandava Ramesh, Vajapeyayajula RaviKiran, V. Vinod, Devabhaktuni Saraswathi, and Venugopal N. Rao. "Comparative Analysis for Selection of Resin Luting Cements Based on Filler Content: An in vitro Study." Journal of Contemporary Dental Practice 13, no. 4 (2012): 481–86. http://dx.doi.org/10.5005/jp-journals-10024-1173.

Full text

Abstract:

ABSTRACT Context Resin luting of all-ceramic restorations results in increased performance; however, the strengthening mechanism and the role of the mechanical properties of the resin are not fully understood. Objective The aim of this study was to investigate the effect of filler content on the flexural properties of resin luting agents and thereby selecting an appropriate resin luting cement. Materials and methods Three esthetic resin luting agents studied were Calibra (Dentsply); RelyX ARC and Panavia F. Ten beam-shaped specimen (L × W × H: 30 × 8 × 2 mm) were made for each of the material

APA, Harvard, Vancouver, ISO, and other styles

26

Pilathadka, Shriharsha, Radovan Slezák, Dagmar Vahalová, Marina George Kudiyirickal, and Sujith Sukumar. "Influence of Different Luting Agents on the Marginal Discrepancy of Procera® AllCeram Alumina Crown Copings – An Experimental Study." Acta Medica (Hradec Kralove, Czech Republic) 51, no. 1 (2008): 13–18. http://dx.doi.org/10.14712/18059694.2017.2.

Full text

Abstract:

Two maxillary first molars and two central incisor typhodont teeth were prepared with 0.8 mm chamfer, 2.0 mm occlusal reduction, and 6 degree taper. The prepared teeth were duplicated 9 times to obtain 36 die stone models and divided into three groups (n = 12). Luting agents tested were zinc phosphate, glass ionomer and resin cement. Procera®AllCeram 0.6 mm coping was fixed with a calibrated finger force of 50 N. The absolute marginal discrepancy was measured using the scanning electron microscope on four axial walls with 4 measurements on each wall to obtain a total of 16 readings for one too

APA, Harvard, Vancouver, ISO, and other styles

27

Gemalmaz, Deniz, Cornelis H. Pameijer, Mark Latta, Ferah Kuybulu, and Toros Alcan. "In Vivo Disintegration of Four Different Luting Agents." International Journal of Dentistry 2012 (2012): 1–6. http://dx.doi.org/10.1155/2012/831508.

Full text

Abstract:

The purpose of this study was to evaluate the disintegration of luting agents. An intraoral sample holder was made having four holes of 1.4 mm diameter and 2 mm depth. The holder was soldered onto the buccal surface of an orthodontic band, which was cemented to the first upper molar in 12 patients, average age 26 years. The holes were filled with a zinc phosphate (Phosphate Kulzer), a glass ionomer (Ketac Cem), a resin-modified-glass ionomer (Fuji Plus), and a resin cement (Calibra). Impressions were made at baseline, and 6, 12, and 18 months from which epoxy replicas were made, which were sca

APA, Harvard, Vancouver, ISO, and other styles

28

Jefferson, Kathy L., Robert B. Zena, and Beverly Giammara. "Effects of carbamide peroxide on dental luting agents." Journal of Endodontics 18, no. 3 (1992): 128–32. http://dx.doi.org/10.1016/s0099-2399(06)81313-0.

Full text

APA, Harvard, Vancouver, ISO, and other styles

29

Diaz-Arnold, Ana M., Marcos A. Vargas, and Debra R. Haselton. "Current status of luting agents for fixed prosthodontics." Journal of Prosthetic Dentistry 81, no. 2 (1999): 135–41. http://dx.doi.org/10.1016/s0022-3913(99)70240-4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

30

Bjelopavlovic, Monika, Michael Weyhrauch, Herbert Scheller, Stefan Wentaschek, and Karl Martin Lehmann. "Retentive Strength of CAD/CAM-Fabricated All-Ceramic Crowns Luted on Titanium Implant Abutments Using Different Ceramic Materials and Luting Agents: An In Vitro Study." Materials 15, no. 19 (2022): 6968. http://dx.doi.org/10.3390/ma15196968.

Full text

Abstract:

Objectives: This study aimed to determine the retentive strength of monolithic hybrid-all-ceramic crowns luted on titanium implant abutments. Material and Methods: In total, 450 crowns (75 each of Mark II, Empress CAD, e.max CAD, Suprinity, Enamic, Celtra Duo) were milled using a CAD/CAM system. The crowns were cemented onto sandblasted titanium implant abutments using five luting agents (Multilink Implant, Variolink II, RelyX Unicem, Fujicem, and Panavia 2.0). After thermocycling was performed (5000 cycles: 5–55 °C, 30-s dwell time), the crowns were removed using a universal testing machine.

APA, Harvard, Vancouver, ISO, and other styles

31

Radosavljevic, Radivoje, Sasa Stankovic, Zorica Ajdukovic, Danimir Jevremovic, and Jelena Todic. "Scanning electron microscopy analysis of dental cements." Chemical Industry 63, no. 4 (2009): 281–88. http://dx.doi.org/10.2298/hemind0904281r.

Full text

Abstract:

The aim of this study was to compare in vitro the characteristics of different types of luting cements (zinc phosphate, glass-ionomer and resin based composite cement) using scanning electron microscopy (SEM) analysis and microleakage for the quality range of materials. Dental cements were mixed in accordance with the manufacturer's instructions and formed with posts in dental root canals of extracted teeth. The quality of cement was determined by SEM observation on horizontal sectioned roots with fixed posts according to specific pore and marginal gap diameter. The microleakage was measured o

APA, Harvard, Vancouver, ISO, and other styles

32

Pan, Yu-Hwa, Tai-Min Lin, Perng-Ru Liu, and Lance C. Ramp. "Effect of Luting Agents on Retention of Dental Implant-Supported Prostheses." Journal of Oral Implantology 41, no. 5 (2015): 596–99. http://dx.doi.org/10.1563/aaid-joi-d-13-00161.

Full text

Abstract:

To evaluate the retentive strength of 7 different luting agents in cement-retained implant abutment/analog assemblies. Fifty-six externally hexed dental implant abutment/analog assemblies and cast superstructures were divided randomly into 7 groups for cementation with each of the 7 luting agents. Five definitive cements tested were zinc phosphate cement, All-Bond 2, Maxcem, RelyX Luting cement, HY-Bond, and two provisional cements, ImProv and Premier. Cast superstructures were cemented onto the implant abutments and exposed to 1000 thermal cycles (0°C–55°C) and 100 000 cycles on a chewing sim

APA, Harvard, Vancouver, ISO, and other styles

33

Erkut, S., H. C. Küçükesmen, N. Eminkahyagil, P. Imirzalioglu, and E. Karabulut. "Influence of Previous Provisional Cementation on the Bond Strength Between Two Definitive Resin-based Luting and Dentin Bonding Agents and Human Dentin." Operative Dentistry 32, no. 1 (2007): 84–93. http://dx.doi.org/10.2341/06-27.

Full text

Abstract:

Clinical Relevance Based on in vitro results in extracted teeth, the dual bonding method used was effective in restoring the shear bond strength values that decreased after applying provisional luting agent regardless of the composition of the provisional luting agent (eugenol-based or eugenol-free) used.

APA, Harvard, Vancouver, ISO, and other styles

34

AL-Makramani, Bandar M. A., Abdul A. A. Razak, and Mohamed I. Abu-Hassan. "Effect of Luting Cements on the Compressive Strength of Turkom-Cera™ All-ceramic Copings." Journal of Contemporary Dental Practice 9, no. 2 (2008): 33–40. http://dx.doi.org/10.5005/jcdp-9-2-33.

Full text

Abstract:

Abstract Aim The objective of this study is to investigate the effect of different luting agents on the fracture strength of Turkom-Cera™ all-ceramic copings. Methods and Materials Standardized metal dies were duplicated from a prepared maxillary first premolar tooth using non-precious metal alloy (Wiron 99). Thirty Turkom-Cera™ copings of 0.6 mm thickness were then fabricated. Three types of luting agents were used: zinc phosphate cement (Elite™), glass-ionomer cement (Fuji I™), and a dual-cured composite resin cement (Panavia F™). Ten copings were cemented with each type. All copings were ce

APA, Harvard, Vancouver, ISO, and other styles

35

Deep, Prakash, Madhurima Sharma, and Suhas Balla. "Determination of the retentive ability of different luting agents in titanium abutments on implant-supported crowns." Multidisciplinary Science Journal 5 (September 5, 2023): 2023ss0414. http://dx.doi.org/10.31893/multiscience.2023ss0414.

Full text

Abstract:

Implant-supported crowns are either cement-retained or screw-retained. Recently, function and esthetics have been given major focus as advances in implants have greatly improved the longevity of implant restoration. Superior esthetics is seen with cement-retained restoration and is more preferred. However, it is a controversial topic to select the ideal cement type for luting the implant-supported crown. The present study aimed to assess the retentive ability of different luting agents in titanium abutments on implant-supported crowns. The study assessed 60 samples divided into 3 groups of 20

APA, Harvard, Vancouver, ISO, and other styles

36

Anchieta, Rodolfo Bruniera, Eduardo Passos Rocha, Erika Oliveira de Almeida, Amilcar Chagas Freitas Junior, and Ana Paula Martini. "Bonding All-Ceramic Restorations with Two Resins Cement Techniques: A Clinical Report of Three-Year Follow-Up." European Journal of Dentistry 05, no. 04 (2011): 478–85. http://dx.doi.org/10.1055/s-0039-1698922.

Full text

Abstract:

ABSTRACTCeramics have been widely used for esthetic and functional improvements. The resin cement is the material of choice for bonding ceramics to dental substrate and it can also dictate the final esthetic appearance and strength of the restoration. The correct use of the wide spectrum of resin luting agents available depends on the dental tooth substrate. This article presents three-year clinical results of a 41 years old female patient B.H.C complaining about her unattractive smile. Two all-ceramic crowns and two laminates veneers were placed in the maxillary incisors and cemented with a s

APA, Harvard, Vancouver, ISO, and other styles

37

Matani, Jay Dipak, Natasha Parulekar, Mohit Kheur, Shantanu Jambhekar, and MK Supriya. "Retention of Metal Crowns Luted to Implant Abutments of Two Different Diameters using Different Luting Agents." International Journal of Prosthodontics and Restorative Dentistry 2, no. 3 (2012): 96–100. http://dx.doi.org/10.5005/jp-journals-10019-1056.

Full text

Abstract:

ABSTRACT Purpose The desirable properties of a luting agent used for implant prostheses are adequate tensile strength for retention and at the same time render the crowns to be retrievable. No studies have reported a comparison of the retention of implant crowns luted with zinc phosphate and polymeric cements. Studying the retentive abilities of these cements utilizing varying sizes of implant abutments may provide new insights into their clinical behaviors. Aim To compare the retentive abilities of two luting agents, using them to lute crowns on implant abutments of different diameters. Mater

APA, Harvard, Vancouver, ISO, and other styles

38

Attar, Nuray, Laura E. Tam, and Dorothy McComb. "Mechanical and physical properties of contemporary dental luting agents." Journal of Prosthetic Dentistry 89, no. 2 (2003): 127–34. http://dx.doi.org/10.1067/mpr.2003.20.

Full text

APA, Harvard, Vancouver, ISO, and other styles

39

Rosenstiel, Stephen F., Martin F. Land, and Bruce J. Crispin. "Dental luting agents: A review of the current literature." Journal of Prosthetic Dentistry 80, no. 3 (1998): 280–301. http://dx.doi.org/10.1016/s0022-3913(98)70128-3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

40

Muzynski, Bernard L., Evan Greener, Lee Jameson, and William F. P. Malone. "Fluoride release from glass ionomers used as luting agents." Journal of Prosthetic Dentistry 60, no. 1 (1988): 41–44. http://dx.doi.org/10.1016/0022-3913(88)90347-2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

41

Moody, C. R., J. P. DeWald, and J. L. Ferracane. "Comparative study of luting agents with composite resin cores." Journal of Prosthetic Dentistry 62, no. 5 (1989): 527–29. http://dx.doi.org/10.1016/0022-3913(89)90072-3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

42

Peixoto, A. C., A. A. Bicalho, C. P. Isolan, et al. "Bonding of adhesive luting agents to caries-affected dentin." Dental Materials 30 (2014): e128. http://dx.doi.org/10.1016/j.dental.2014.08.264.

Full text

APA, Harvard, Vancouver, ISO, and other styles

43

Eliades, G., M. Dimitriadi, A. Petropoulou, and S. Zinelis. "Conversion of composite luting agents with touch-cure activators." Dental Materials 39 (2023): e28. http://dx.doi.org/10.1016/j.dental.2023.08.057.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

D’Addazio, Gianmaria, Federico Amoroso, Giuseppe Tafuri, et al. "Impact of the Luting Technique on the Positioning of CAD-CAM Porcelain Laminate Veneers: An In Vitro Study." Prosthesis 6, no. 5 (2024): 1095–105. http://dx.doi.org/10.3390/prosthesis6050079.

Full text

Abstract:

The precision of the luting protocol plays a crucial role in the success and survival rate of porcelain laminate veneers (PLVs). This in vitro study aimed to evaluate the influence of different luting techniques on the positioning of PLVs through a novel, noninvasive, scanning-based technique. A total of 45 ceramic PLVs were milled and cemented on human tooth replicas. Specimens were divided into three groups of 15, each subjected to a different luting protocol: flowable composite (Group A), dual-cure resin cement (Group B), and preheated composite resin (Group C). After luting procedures, spe

APA, Harvard, Vancouver, ISO, and other styles

45

Fricker, John P. "A 12-month clinical study comparing four Glass Ionomer Cements for the cementation of orthodontic molar bands." Australasian Orthodontic Journal 11, no. 1 (1989): 10–13. http://dx.doi.org/10.2478/aoj-1989-0003.

Full text

Abstract:

Abstract Four different glass ionomer cements were evaluated in vivo as luting agents for orthodontic mohu bands. A sample of 199 patients with full fixed appliances (Begg Light Wire) were monitored over a period of 12 months during active treatment for loose molar bands. Failures for each edment were: Fuji I, 2-5 percent, Fuji II, 4-5 percent, Ketac- Cem, 4-0 percent and Hy-Bond Luting, 3-0 percent. Chi squared tests showed no statistical difference in failure rates for each cement.

APA, Harvard, Vancouver, ISO, and other styles

46

de Alexandre, RS, VB Santana, AC Kasaz, CAG Arrais, JA Rodrigues, and AF Reis. "Effect of Long-term Simulated Pulpal Pressure on the Bond Strength and Nanoleakage of Resin-luting Agents With Different Bonding Strategies." Operative Dentistry 39, no. 5 (2014): 508–20. http://dx.doi.org/10.2341/13-078.

Full text

Abstract:

SUMMARY This study evaluated the effects of simulated hydrostatic pulpal pressure (SPP) on the microtensile bond strength (μTBS) to dentin and nanoleakage patterns produced by self-adhesive luting agents after 12 months. Three self-adhesive luting agents (RelyX Unicem [UN], RelyX U100 [UC], and Clearfil SA Luting [SA]) and three conventional luting agents (Rely X ARC [RX], Panavia F [PF], and a two-step self-etching adhesive system [Clearfil SE Bond] associated with Panavia F [PS]) were evaluated. One hundred twenty-three human molars were abraded to expose occlusal surfaces. Resin cements wer

APA, Harvard, Vancouver, ISO, and other styles

47

Zmener, O., CH Pameijer, SMH Rincon, SA Serrano, and C. Chaves. "Sealing Properties of Three Luting Agents Used for Complete Cast Crowns: A Bacterial Leakage Study." Operative Dentistry 38, no. 6 (2013): E221—E228. http://dx.doi.org/10.2341/12-446-l.

Full text

Abstract:

SUMMARY Objective To assess the sealing properties of three different luting materials used for cementation of full cast crowns on extracted human premolars. Methods Thirty noncarious human premolars were prepared in a standardized fashion for full cast crown restorations. All margins were placed in dentin. After impressions of the preparations, stone dies were fabricated on which copings were waxed, which were cast in type III alloy using standardized laboratory methods. Teeth were randomly assigned to three groups of 10 samples each (n=10), for which the following cements were used: 1) a res

APA, Harvard, Vancouver, ISO, and other styles

48

Bashir, Aamir, Adil Fayaz, Sandeep Kaur Bali, and Shazana Nazir Qazi. "COMPARATIVE EVALUATION OF PUSH-OUT BOND STRENGTH OF FIBER POST LUTED INSIDE THE ROOT CANAL USING LIGHT CURE FLOWABLE COMPOSITE AND DUAL CURE RESIN - AN INVITRO STUDY." International Journal of Advanced Research 9, no. 01 (2021): 1058–64. http://dx.doi.org/10.21474/ijar01/12390.

Full text

Abstract:

Aim: The aim of this study was to compare by means of Push-Out test the difference in bond strength of two different luting agents with fibre post, and the effect of anatomical root levels on the bond strength of each cement. Materials and Methods: A total of 40 freshly extracted maxillary central incisor and canine teeth were included in the study. The teeth were divided into two groups of twenty each, and were assigned to Groups A and B according to the luting agent (light cure, dual cure) used to cement the post inside the root canal. After decoronation, 10 mm standardized post spaces were

APA, Harvard, Vancouver, ISO, and other styles

49

Khan, Ali Hamad, Amjad Hanif, Shahid Ilyas, et al. "Effect of PH and Powder to Liquid Ratio on the Solubility of a Conventional Glass Ionomer Luting Cement." Pakistan Journal of Medical and Health Sciences 16, no. 6 (2022): 786–89. http://dx.doi.org/10.53350/pjmhs22166786.

Full text

Abstract:

Introduction: Properties of GI luting cements are influenced by complex oral environment. This in-vitro study is designed to simulate oral conditions for better understanding behavior of GI luting cement in oral cavity and to evaluate its solubility. Fluctuating oral environment from acidic to alkaline is thought to cause solubility of luting agent, which insults the integrity of luting agents leading to micro leakage and ultimately luting failure of restorations. An attempt via this study was made to funnel powder liquid ratio for dental practice by exposing different P/L ratio to varying pHs

APA, Harvard, Vancouver, ISO, and other styles

50

Amina, Geeta Rajput, Saad Ahmed, et al. "Comparison of Microleakage in Nanocomposite and Amalgam as a Crown Foundation Material Luted with Different Luting Cements under CAD-CAM Milled Metal Crowns: An In Vitro Microscopic Study." Polymers 14, no. 13 (2022): 2609. http://dx.doi.org/10.3390/polym14132609.

Full text

Abstract:

Microleakage is a persistent problem despite advancement in materials and techniques in fixed prosthodontics. This leads to the importance of sound crown foundation material and luting agents used to maintain the marginal seal. The literature is deficient with studies, comparing microleakage under various crown foundation materials and luting agents, especially with CAD-CAM (computer-aided design and computer-aided manufacturing) metal crowns. This study was aimed to compare microleakage in a nanocomposite/dentinal bonding agent and amalgam/cavity varnish as crown foundation materials luted wi

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!