Log in

Relevant bibliographies by topics / Machine of 360° / Journal articles

To see the other types of publications on this topic, follow the link: Machine of 360°.

Journal articles on the topic 'Machine of 360°'

Author: Grafiati

Published: 4 June 2021

Last updated: 3 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Machine of 360°.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

H, Bariwala Mo Shanib. "360 Degree Flexible Drilling Machine." International Journal for Research in Applied Science and Engineering Technology 9, no. 3 (2021): 1243–48. http://dx.doi.org/10.22214/ijraset.2021.33521.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Fadele, Oluwaseyi, Ademola Afolabi, Dolapo Oloyede, Olufemi Adedire, Hafsat Bankole, and Adeniyi Adetunji. "Specific energy consumption of a Moringa oleifera seed shelling machine." Research in Agricultural Engineering 66, No. 3 (2020): 104–11. http://dx.doi.org/10.17221/81/2019-rae.

Full text

Abstract:

In this work, the Specific Energy Consumption (SEC) and machine capacity for a Moringa oleifera seed shelling machine were determined in relation to the cylinder speed and seed sizes. A M. oleifera seed shelling machine was tested and the SEC was appraised. The SEC and machine capacity of the M. oleifera seed shelling machine were determined at five speed levels, viz. 200, 240, 280, 320 and 360 rpm using three seed sizes (viz. small, medium and large seed sizes). The SEC and machine capacity increased with the seed sizes during the shelling process. The same trend was observed for the relation

APA, Harvard, Vancouver, ISO, and other styles

3

Wang, Chao, Wanzhou Li, Qianchuan Zhao, Fei Peng, Hongbin Yang, and Rui Huang. "Consensus Control Design for 360 MN Extrusion Machine Producing Process." Mathematical Problems in Engineering 2014 (2014): 1–16. http://dx.doi.org/10.1155/2014/623921.

Full text

Abstract:

This paper mainly addresses the issue of 360 MN extrusion machine and focuses on the stabilization control of main table attitude. We will first introduce the problem and then model the extrusion machine. As the machine is a multi-input multioutput (MIMO) and strong coupling system, it is challenging to apply existing control theory to design a controller to stabilize the main table attitude. Motivated by recent research in the field of multiagent systems, we design a consensus control protocol for our system and derive our convergence conditions based directly on Routh stability criterion. Th

APA, Harvard, Vancouver, ISO, and other styles

4

Rajasekhar, D., and N. Manoharan. "Fabrication of 360 Degree Automatic Machine Gun Rover for Advanced Defence." Medico-Legal Update 18, no. 1 (2018): 504. http://dx.doi.org/10.5958/0974-1283.2018.00107.x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Pino, Rodney, Renier Mendoza, and Rachelle Sambayan. "Optical character recognition system for Baybayin scripts using support vector machine." PeerJ Computer Science 7 (February 15, 2021): e360. http://dx.doi.org/10.7717/peerj-cs.360.

Full text

Abstract:

In 2018, the Philippine Congress signed House Bill 1022 declaring the Baybayin script as the Philippines’ national writing system. In this regard, it is highly probable that the Baybayin and Latin scripts would appear in a single document. In this work, we propose a system that discriminates the characters of both scripts. The proposed system considers the normalization of an individual character to identify if it belongs to Baybayin or Latin script and further classify them as to what unit they represent. This gives us four classification problems, namely: (1) Baybayin and Latin script recogn

APA, Harvard, Vancouver, ISO, and other styles

6

Rashid, Mohammad Mamunur, KZM Abdul Motaleb, and Ayub Nabi Khan. "Effect of flat speed of carding machine on the carded sliver and yarn quality." Journal of Engineered Fibers and Fabrics 14 (January 2019): 155892501984518. http://dx.doi.org/10.1177/1558925019845183.

Full text

Abstract:

Processing parameters play an important role in influencing the quality of the final product in any kinds of production. The aim of this project is to observe the quality of the carded sliver and yarn by applying different flat speeds on the carding machine while the other machine parameters were fixed. Five flat speeds (200, 240, 280, 320, and 360 mm/min) have been used to produce slivers and yarns. Sliver fineness of Ne0.11 and yarn of two different counts (Ne24 and Ne30) were produced for assessing the quality. It is found that the neps, short fibers, and unevenness of sliver and yarn are r

APA, Harvard, Vancouver, ISO, and other styles

7

Lee, Dongwon, Minji Choi, and Joohyun Lee. "Prediction of Head Movement in 360-Degree Videos Using Attention Model." Sensors 21, no. 11 (2021): 3678. http://dx.doi.org/10.3390/s21113678.

Full text

Abstract:

In this paper, we propose a prediction algorithm, the combination of Long Short-Term Memory (LSTM) and attention model, based on machine learning models to predict the vision coordinates when watching 360-degree videos in a Virtual Reality (VR) or Augmented Reality (AR) system. Predicting the vision coordinates while video streaming is important when the network condition is degraded. However, the traditional prediction models such as Moving Average (MA) and Autoregression Moving Average (ARMA) are linear so they cannot consider the nonlinear relationship. Therefore, machine learning models ba

APA, Harvard, Vancouver, ISO, and other styles

8

Anwar, Muhammad Shahid, Jing Wang, Wahab Khan, Asad Ullah, Sadique Ahmad, and Zesong Fei. "Subjective QoE of 360-Degree Virtual Reality Videos and Machine Learning Predictions." IEEE Access 8 (2020): 148084–99. http://dx.doi.org/10.1109/access.2020.3015556.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Padmanaban, Nitish, Timon Ruban, Vincent Sitzmann, Anthony M. Norcia, and Gordon Wetzstein. "Towards a Machine-Learning Approach for Sickness Prediction in 360° Stereoscopic Videos." IEEE Transactions on Visualization and Computer Graphics 24, no. 4 (2018): 1594–603. http://dx.doi.org/10.1109/tvcg.2018.2793560.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Chen, Guo Jin, Jing Ni, Ting Ting Liu, Ming Xu, and Lu Gao Lin. "Study on the Key Technology for Large-Scale High-Performance CNC Vertical Broaching Machine." Advanced Materials Research 705 (June 2013): 483–86. http://dx.doi.org/10.4028/www.scientific.net/amr.705.483.

Full text

Abstract:

For the general broaching machines problems of structure bulkiness, poor cylinder synchronization, lack of optimization design, low-grade control system, low efficiency and operational reliability, the paper studied the structural optimization technology of the large-scale high-performance CNC vertical broaching machine, designed the new 360-degree high-load lateral rotary table, the axial-rotary multi-pass joint of the anti-leakage and the elastic-contact, and the modular slider rails, so as to improve the mechanical performance, the working stability and reliability. The remote network intel

APA, Harvard, Vancouver, ISO, and other styles

11

Siomos, Nikolaos, Ilias Fountoulakis, Athanasios Natsis, Theano Drosoglou, and Alkiviadis Bais. "Automated Aerosol Classification from Spectral UV Measurements Using Machine Learning Clustering." Remote Sensing 12, no. 6 (2020): 965. http://dx.doi.org/10.3390/rs12060965.

Full text

Abstract:

In this study, we present an aerosol classification technique based on measurements of a double monochromator Brewer spectrophotometer during the period 1998–2017 in Thessaloniki, Greece. A machine learning clustering procedure was applied based on the Mahalanobis distance metric. The classification process utilizes the UV Single Scattering Albedo (SSA) at 340 nm and the Extinction Angstrom Exponent (EAE) at 320–360 nm that are obtained from the spectrophotometer. The analysis is supported by measurements from a CIMEL sunphotometer that were deployed in order to establish the training dataset

APA, Harvard, Vancouver, ISO, and other styles

12

Bujić, Mila, Mikko Salminen, Joseph Macey, and Juho Hamari. "“Empathy machine”: how virtual reality affects human rights attitudes." Internet Research 30, no. 5 (2020): 1407–25. http://dx.doi.org/10.1108/intr-07-2019-0306.

Full text

Abstract:

PurposeThis study aims to investigate how media content consumed through immersive technology may evoke changes in human rights attitudes. It has been proposed that our inability to empathize with others could be overcome by stepping into another's shoes. “Immersive journalism” has been postulated as being able to place us into the shoes of those whose feelings and experiences are distant to us. While virtual reality (VR) and 360-degree news videos have become widely available, it remains unclear how the consumption of content through immersive journalism affects users' attitudes.Design/method

APA, Harvard, Vancouver, ISO, and other styles

13

Park, Sohee, Arani Bhattacharya, Zhibo Yang, Samir R. Das, and Dimitris Samaras. "Mosaic: Advancing User Quality of Experience in 360-Degree Video Streaming With Machine Learning." IEEE Transactions on Network and Service Management 18, no. 1 (2021): 1000–1015. http://dx.doi.org/10.1109/tnsm.2021.3053183.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Pimentel, Daniel, Sri Kalyanaraman, Yu-Hao Lee, and Shiva Halan. "Voices of the unsung: The role of social presence and interactivity in building empathy in 360 video." New Media & Society 23, no. 8 (2021): 2230–54. http://dx.doi.org/10.1177/1461444821993124.

Full text

Abstract:

360 video is considered an “empathy machine,” in part because it places audiences in the perspective of the other. Despite its popularity, its influence on empathy is not fully understood. Two possible mechanisms driving empathy within 360 video are social presence (sense of being with others) and interactivity (degree of control over media content). To elucidate how 360 videos can encourage empathic outcomes through these factors, a 2 (social presence: high/low) × 2 (interactivity: high/low) between-subjects experiment ( N = 110) was conducted testing 360 videos about Alaskan climate change r

APA, Harvard, Vancouver, ISO, and other styles

15

Sukor, Mohd Azizee, S. M. Salleh, A. H. M. Yusoff, W. M. A. W. Mahmud, S. Ahmad, and S. Mahzan. "Design Improvement of an Automatic Fish Feeding Machine." Journal of Computational and Theoretical Nanoscience 17, no. 2 (2020): 1183–88. http://dx.doi.org/10.1166/jctn.2020.8786.

Full text

Abstract:

This study is about the design improvement of an automatic fish feeding machine. The most recent machine has been selected as the point of reference for this research. Realizing the limitation of existing automatic fish feeding machine has inspired the researcher to develop a system which overcomes previous systems’ flaws, hence giving more advantages and benefits to the owner and workers. This research has three main goals: To design and fabricate automatic fish feeding machine; to ensure an accurate amount of fish pellet to be dispersed at a predetermined time, 360° and at specified distance

APA, Harvard, Vancouver, ISO, and other styles

16

Dudzńiski, Damian, Tomasz Kryjak, and Zbigniew Mikrut. "Human action recognition using simple geometric features and a finite state machine." Image Processing & Communications 18, no. 2-3 (2013): 49–60. http://dx.doi.org/10.2478/v10248-012-0079-y.

Full text

Abstract:

Abstract In this paper a human action recognition algorithm, which uses background generation with shadow elimination, silhouette description based on simple geometrical features and a finite state machine for recognizing particular actions is described. The performed tests indicate that this approach obtains a 81 % correct recognition rate allowing real-time image processing of a 360 X 288 video stream.

APA, Harvard, Vancouver, ISO, and other styles

17

Wei, Cheng Li, Ang Cher Wee, Chan Wai Herng, and Ying Meng Fai. "Human Factors Evaluation of 360 Panoramic View Camera System for Ground Vehicle." Proceedings of the Human Factors and Ergonomics Society Annual Meeting 51, no. 18 (2007): 1086–90. http://dx.doi.org/10.1177/154193120705101807.

Full text

Abstract:

The 360 Panoramic view camera System (360 PS) is a commercial-off-the-shelf camera technology that captures and presents the viewer with a 360-degree horizontal view around the camera. Due to its unique ability to monitor in omni-directional, there is potential for operator functions such as surveillance and monitoring, and for enhancing situational awareness of crews operating vehicles with restricted visual field-of-view. This man-in-the-loop evaluation is to study the limitations and capabilities of the system, and enhance its performance for the proposed functions. Two sets of experiments

APA, Harvard, Vancouver, ISO, and other styles

18

Zhang, Lei, Hong Li Gao, Ming Heng Xu, Shi De Xiao, and Peng Du. "Researches on Image Processing Technology Used in Bamboo Weaving Machine." Advanced Materials Research 204-210 (February 2011): 1070–73. http://dx.doi.org/10.4028/www.scientific.net/amr.204-210.1070.

Full text

Abstract:

A new bamboo weaving machine, in which automatic control system is employed, is introduced in this paper. The system deals with the images firstly, and then controls bamboo weaving by means of electromotor and transmission devices. Different algorithms, such as lift wavelet, bivariate rational interpolation and Ostu are used in image processing. The minimum width of the bamboo filament is 0.7mm. The maximum number of the bamboo filament in the warp and weft direction is 360 and 430 respectively. Various beautiful bamboo artware can be weaved automatically by this machine in a short time.

APA, Harvard, Vancouver, ISO, and other styles

19

Suhada, Resa Trauna, Silvi Ariyanti, Anggun Vionieta Fajar, and Aam Komalasari. "TRAINING AUTODESK FUSION 360 FOR TEENAGE OF SENIOR HIGH SCHOOL GRADUATES IN IMPROVING ABILITY IN DISASTERS." ICCD 1, no. 1 (2018): 285–89. http://dx.doi.org/10.33068/iccd.vol1.iss1.43.

Full text

Abstract:

Autodesk launches Autodesk Fusion 360 - a cloud-based device that combines industrial design and 3D mechanics, collaboration, machinery in one package - the first solution available for purchase on Mac App Store worldwide including Indonesia. The Fusion 360 combines design, collaboration and machine tools into one package and is now available with the security and simplicity of the Mac App Store. With Fusion 360, designers and engineers can create products that have shapes and functions and prepare them for the fabrication process by using a single device. This community service activity is in

APA, Harvard, Vancouver, ISO, and other styles

20

Si, Zhan Jun, Wen Xia Li, and Chong Gu. "Research of Printing Machine Simulation System Based on Virtual Reality." Applied Mechanics and Materials 731 (January 2015): 420–25. http://dx.doi.org/10.4028/www.scientific.net/amm.731.420.

Full text

Abstract:

According to complex structure, long production cycle, low efficiency and high training cost of printing machine, the printing machine motion simulation system based on virtual reality is presented. The system used J2205 as the research object and needed Solidworks mechanical modeling software to build 3D models and assemble into the printing machine. Then the assembly was imported into 3Dsmax to map, render and make animation. Through Virtools_Max_Exporter plug-in the digital model was saved as nmo format. After analyzing dynamics principle of printing machine parts, we used script language a

APA, Harvard, Vancouver, ISO, and other styles

21

Yonis, Abdal Gadir, Al Safi Ahmed Abdallash, Mona Ahmed, and Ashraf Mustafa Mohammed Osman. "ASSESSMENT OF PATHOLOGICAL CHANGE OF SCHISTOSOMA MANSONI INFECTIONIN THE LIVER USING ULTRASOUNOGRAPHY." International Journal of Research -GRANTHAALAYAH 7, no. 7 (2019): 125–31. http://dx.doi.org/10.29121/granthaalayah.v7.i7.2019.738.

Full text

Abstract:

Background: Schistosomiasis is a tropical parasitic disease caused by blood flukes of the genus Schistosoma, causes periportal fibrosis and portal hypertension in approximately 13%-18% of those afflicted with the disease in the Gezira irrigated areas of Sudan. This a prospective study compromise of 360 consecutive patients at North Gezira State between 2016 to 2019 aimed to assessment of pathological change in schistosomiasismansoni infection using B-mode grayscale ultrasound, The images done by portable Sono Scape- A6 machine using convex probe with frequency range from 3.5 to 5 MHz and the d

APA, Harvard, Vancouver, ISO, and other styles

22

Yonis, Abdal Gadir, Al Safi Ahmed Abdallash, Mona Ahmed, and Ashraf Mustafa Mohammed Osman. "CHARACTERIZATION OF PORTAL HYPERTENSION IN GEZIRASTATE (SUDAN) USING ULTRASOUND." International Journal of Research -GRANTHAALAYAH 7, no. 7 (2019): 30–38. http://dx.doi.org/10.29121/granthaalayah.v7.i7.2019.711.

Full text

Abstract:

Peri-sinusoidal portal hypertension with frequent episodes of upper gastro intestinal variceal bleeding are hallmarks of hepatic-splenic schistosomiasis (Mansoni or Japonicum). This a prospective study compromise of 306 consecutive patients at North Gezira State between 2016 to 2019, aimed to characterize the portal hypertension &to minimize potentiallysevere and deadly complications. Using B-mode grayscale ultrasound, The images done by portable Sono- Scape- A6 machine using convex probe with frequency range from 3.5 to 5 MHz and the data analyzed by SPSS version 15.The result showed that

APA, Harvard, Vancouver, ISO, and other styles

23

Wolny, Ryszard. "The process of regeneration of the high-pressure turbine cylinder." Mechanik 92, no. 11 (2019): 723–25. http://dx.doi.org/10.17814/mechanik.2019.11.96.

Full text

Abstract:

The process of regeneration of the cylinder of a high-pressure turbine being a subassembly of a 360 MW power block was presented. Criteria that qualify the cylinder for regeneration were discussed. Machining operations with the description of machine tools and special devices were characterized. In order to ensure high quality requirements cutting parameters for selected operations were optimized.

APA, Harvard, Vancouver, ISO, and other styles

24

Wu, Xian Fu, Jian Qun Liu, Dong Wei Xu, and Wei Qiang Gao. "Design and Implementation of the Circular Saw CNC Machining of the Stone Bridge Cutting Machine." Key Engineering Materials 579-580 (September 2013): 289–94. http://dx.doi.org/10.4028/www.scientific.net/kem.579-580.289.

Full text

Abstract:

The stone bridge cutting machine is a multi-function processing machine which can saw, mill and grind. The circular saw machining is the most common processing way. This paper introduced the angle calculation method of the circular saw CNC(Computer Numerical Control) machining lines and arcs, focused on the tangential following algorithm of the circular saw, which was that the tool moved along the tangential direction of the circle or arc with the interpolated motion. Meanwhile, combining with the mechanical property of the stone bridge cutting machine, that is, the rotation angle of the C-axi

APA, Harvard, Vancouver, ISO, and other styles

25

Suprapto, Suprapto, and Edy Riyanto. "Grape Drying Process Using Machine Vision Based on Multilayer Perceptron Networks." Indonesian Journal of Science and Technology 5, no. 3 (2020): 382–94. http://dx.doi.org/10.17509/ijost.v5i3.24991.

Full text

Abstract:

This paper proposed a grape drying machine using computer vision and Multi-layer Perceptron (MLP) method. Computer vision is for taking grapes’ image on conveyor, whereas MLP is for controlling grape drying machine and classifying its output. To evaluate the proposed, a kind of grapes are put on conveyor of the machine and their images are taken every two min. Some parameters of MLP to control the drying machine includes dried grape, temperature, grape area, motor position, and motion speed. Those parameters are to adjust an appropriate MLP’s output, including motion control and heater control

APA, Harvard, Vancouver, ISO, and other styles

26

Zhang, Yichao, Lakitha O. H. Wijeratne, Shawhin Talebi, and David J. Lary. "Machine Learning for Light Sensor Calibration." Sensors 21, no. 18 (2021): 6259. http://dx.doi.org/10.3390/s21186259.

Full text

Abstract:

Sunlight incident on the Earth’s atmosphere is essential for life, and it is the driving force of a host of photo-chemical and environmental processes, such as the radiative heating of the atmosphere. We report the description and application of a physical methodology relative to how an ensemble of very low-cost sensors (with a total cost of <$20, less than 0.5% of the cost of the reference sensor) can be used to provide wavelength resolved irradiance spectra with a resolution of 1 nm between 360–780 nm by calibrating against a reference sensor using machine learning. These low-cost sensor

APA, Harvard, Vancouver, ISO, and other styles

27

Barreda-Ángeles, Miguel, Sara Aleix-Guillaume, and Alexandre Pereda-Baños. "An “Empathy Machine” or a “Just-for-the-Fun-of-It” Machine? Effects of Immersion in Nonfiction 360-Video Stories on Empathy and Enjoyment." Cyberpsychology, Behavior, and Social Networking 23, no. 10 (2020): 683–88. http://dx.doi.org/10.1089/cyber.2019.0665.

Full text

APA, Harvard, Vancouver, ISO, and other styles

28

Li, Xueyang, Kedar Pandya, Nikos Karathanasopoulos, Christian C. Roth, and Dirk Mohr. "Plasticity and fracture of aluminium 7075 at high strain rates and elevated temperatures." EPJ Web of Conferences 250 (2021): 05007. http://dx.doi.org/10.1051/epjconf/202125005007.

Full text

Abstract:

Slow, intermediate and high strain rate experiments with UT geometries are performed on aluminum AA7075-T6 sheet metal at various temperatures. The comprehensive experimental program characterizes the plasticity response at temperatures ranging from 20°C to 360°C and at strain rates ranging from 0.001/s to 150/s. The elevated temperature - elevated strain rate experiments are performed on a hydraulic tensile testing machine and a Split Hopkinson Pressure Bar system with a Load Inversion Device along with a custom-made induction heating system. A machine learning based modified Johnson-Cook pla

APA, Harvard, Vancouver, ISO, and other styles

29

Pan, Wen Cheng, Song Lin Ding, and John P. T. Mo. "Statistical Analysis of Cutting Forces in the Milling of Titanium Alloys with Polycrystalline Diamond (PCD) Tools." Applied Mechanics and Materials 271-272 (December 2012): 338–42. http://dx.doi.org/10.4028/www.scientific.net/amm.271-272.338.

Full text

Abstract:

Polycrystalline Diamond (PCD) is one of the popular materials in industry because of its superior mechanical properties. With the hardness of up to 8000HV and the thermal conductivity of 360 W/mk, PCD can be used to machine hard-to-machine materials. This paper introduces the statistical analysis of cutting forces in the milling of Titanium alloys with small PCD tools. Nine customized PCD tools with different tool geometries were fabricated by changing the front angle, clearance angle and cutting edge angle. Cutting experiments were carried out and cutting forces were recorded with a DAQ syste

APA, Harvard, Vancouver, ISO, and other styles

30

Gingrich, Oliver, Evgenia Emets, Alain Renaud, Sean Soraghan, and Dario Villanueva Ablanedo. "KIMA: The Wheel–Voice Turned into Vision: A Participatory, Immersive Visual Soundscape Installation." Leonardo 53, no. 5 (2020): 479–84. http://dx.doi.org/10.1162/leon_a_01698.

Full text

Abstract:

Over the last five years, KIMA, an art and research project on sound and vision, has investigated visual properties of sound. Previous iterations of KIMA focused on digital representations of cymatics—physical sound patterns—as media for performance. The most recent development incorporated neural networks and machine learning strategies to explore visual expressions of sound in participatory music creation. The project, displayed on a 360-degree canvas at the London Roundhouse, prompted the audience to explore their own voice as intelligent, real-time visual representation. Machine learning a

APA, Harvard, Vancouver, ISO, and other styles

31

Irham, Lalu Gias, Adiwijaya Adiwijaya, and Untari Novia Wisesty. "Klasifikasi Berita Bahasa Indonesia Menggunakan Mutual Information dan Support Vector Machine." JURNAL MEDIA INFORMATIKA BUDIDARMA 3, no. 4 (2019): 284. http://dx.doi.org/10.30865/mib.v3i4.1410.

Full text

Abstract:

News is a source of information disseminated in various types of media. In order to make it easier for news readers to obtain the desired news, the news needs to be classified. The large number of scattered news creates difficulties in classifying the news based on the topic. Therefore the author conducted a study to classify news into 12 classes (culture, economy, entertainment, law, health, life, automotive, education, politics, sports, technology, and tourism) automatically against 360 Indonesian news data. In this study several test scenarios were conducted to see the effect of stopword re

APA, Harvard, Vancouver, ISO, and other styles

32

Wanzo, Rebecca. "Moten’s magical meditations: Black ontology and genealogies of hope." European Journal of American Culture 39, no. 2 (2020): 226–32. http://dx.doi.org/10.1386/ejac_00027_5.

Full text

Abstract:

Review of: Black and Blur, Fred Moten (2017)Durham, NC and London: Duke University Press, 360 pp.,ISBN 978-0-82237-016-1, p/bk, $28.95Stolen Life, Fred Moten (2018)Durham, NC and London: Duke University Press, 336 pp.,ISBN 978-0-82237-058-1, p/bk, $27.95 <p/> The Universal Machine, Fred Moten (2019)Durham, NC and London: Duke University Press, 312 pp.,ISBN 978-0-82237-055-0, p/bk, $27.95

APA, Harvard, Vancouver, ISO, and other styles

33

Zhao, Shun Bo, Yu Tao Li, and Yang Yang Xu. "Study on Durability of Concrete with Machine-Made Sand Part II: Long-Term Carbonization." Applied Mechanics and Materials 438-439 (October 2013): 10–14. http://dx.doi.org/10.4028/www.scientific.net/amm.438-439.10.

Full text

Abstract:

This paper introduces the experimental results of long-term carbonization of concrete with machine-made sand (MSC), which is part of the studies on durability of this new concrete. Three strength grades of concrete C30, C40 and C50, and the contents of stone powder in machine-made sand of 5%, 9% and 13% in mass were considered in the mix proportion of concrete with machine-made sand. The ordinary concrete with natural river sand in the same strength grade was tested at the same time for comparison. The test was conducted for 360 days, and the results showed that the carbonization of MSC was si

APA, Harvard, Vancouver, ISO, and other styles

34

Anwar, Muhammad Shahid, Jing Wang, Sadique Ahmad, et al. "Impact of the Impairment in 360-Degree Videos on Users VR Involvement and Machine Learning-Based QoE Predictions." IEEE Access 8 (2020): 204585–96. http://dx.doi.org/10.1109/access.2020.3037253.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

Cherry, Steven. "The Race for a New Game Machine: Creating the Chips Inside the XBox 360 and the PlayStation 3." IEEE Spectrum 46, no. 3 (2009): 24. http://dx.doi.org/10.1109/mspec.2009.4795449.

Full text

APA, Harvard, Vancouver, ISO, and other styles

36

Korytov, M. S., and I. K. Kanin. "INDIRECT MEASUREMENT METHODOLOGY OF CARGO WEIGHT LIFTED BY THE EXCAVATOR IN THE CRANE MODE." Vestnik SibADI 15, no. 3 (2018): 350–60. http://dx.doi.org/10.26518/2071-7296-2018-3-350-360.

Full text

Abstract:

Introduction.To solve the indirect measurement problem of the cargo weight lifted by the excavator in crane mode the authors propose the specific method and develop mathematical model according to the indications of hydraulic fluid pressure sensors in the piston and rod cavities of boom lifting cylinders. Moreover, the signals from the angle sensor of the boom and the handle relative to the gravity horizon are used, the roll and pitch sensors of the rotary column of the excavator relative to the gravity horizon are additionally applied.Materials and methods. As initial data of the indirect mea

APA, Harvard, Vancouver, ISO, and other styles

37

Rabello, Bruno, Edson Mattos, Bruno Evangelista, and Esteban Clua. "Introdução ao XNA." Revista de Informática Teórica e Aplicada 15, no. 1 (2008): 39–82. http://dx.doi.org/10.22456/2175-2745.6012.

Full text

Abstract:

This tutorial explore the basic characteristics for the game development plataform developed by Microsoft, called XNA (XNA´s Not Acronymed). XNA allows the creation of PC games, for Windows plataform and XBOX 360, for a console plataform. XNA aims to substitute the DirectX Manager, a version of DirectX for a .NET plataform. All the applications made in XNA are compiled in a managed code. This code is executed at the Common Language Runtime (CLR), which is the virtual machine of the .NET plataform.

APA, Harvard, Vancouver, ISO, and other styles

38

Lang, Yao, Dan Zheng, and Xiu Yan Lv. "Study on the Angle Measurement of Laser Shaft Alignment Instrument." Advanced Materials Research 898 (February 2014): 644–47. http://dx.doi.org/10.4028/www.scientific.net/amr.898.644.

Full text

Abstract:

Laser shaft alignment instrument needs to know the angle which is rotated by the axis of measurement point at each time. It adopted the accelerometer ADXL203 to measure angle and put its two sensing axis in the vertical plane, and then calculated its outputs. It makes the conversion formula of inclination and acceleration better to improve the measurement accuracy, and the measurement range achieves 360 °. Finally, the measurement data dealt with mathematics are displayed by LabVIEW, and it friendly achieves the man-machine interactive function.

APA, Harvard, Vancouver, ISO, and other styles

39

Jain, Paras, CH N. V. S. Praneeth, Iragavarapu Kannan, Potluri Harsha Sai, and Jaba Deva Krupa Abel. "Electrocardiogram Beat Classification Using Data Filtration Technique and Support Vector Machine." Journal of Computational and Theoretical Nanoscience 17, no. 8 (2020): 3613–20. http://dx.doi.org/10.1166/jctn.2020.9240.

Full text

Abstract:

This work addresses the automatic classification of arrhythmia beats into four generalized classes as described by the Association for the Advancement of Medical Instrumentation (AAMI) standard. We propose a method that includes time-series, statistical and frequency features of RR-interval, DWT, and EMD analysis of QRS morphology. Also, a data filtration technique using support vector selection and under-sampling is applied to find those features as well as data points having significant prediction capabilities. While testing the above combination on MIT-BIH arrhythmia database, adopting the

APA, Harvard, Vancouver, ISO, and other styles

40

Setyawan, Lilik. "Increasing the production capacity of copper drawing machine in the cable industry using SMED method: A case study in Indonesia." Operations Excellence: Journal of Applied Industrial Engineering 11, no. 3 (2019): 217. http://dx.doi.org/10.22441/oe.v11.3.2019.031.

Full text

Abstract:

Indonesian Government has electricity program of 35,000 Megawatt. To make this program successful, all cable companies begin to implement strategies to satisfy these needs. Increasing the production capacity is the main program implemented by cable companies in Indonesia. One of the cables companies has production output on copper drawing machine of 11 unit of bobbins per shift with the production process cycle time of 32.32 minutes per bobbin. To improve production capacity, improvements need to be performed to reduce the cycle time of the production process. This research was conducted by ap

APA, Harvard, Vancouver, ISO, and other styles

41

Shahid Anwar, Muhammad, Jing Wang, Sadique Ahmad, Asad Ullah, Wahab Khan, and Zesong Fei. "Evaluating the Factors Affecting QoE of 360-Degree Videos and Cybersickness Levels Predictions in Virtual Reality." Electronics 9, no. 9 (2020): 1530. http://dx.doi.org/10.3390/electronics9091530.

Full text

Abstract:

360-degree Virtual Reality (VR) videos have already taken up viewers’ attention by storm. Despite the immense attractiveness and hype, VR conveys a loathsome side effect called “cybersickness” that often creates significant discomfort to the viewers. It is of great importance to evaluate the factors that induce cybersickness symptoms and its deterioration on the end user’s Quality-of-Experience (QoE) when visualizing 360-degree videos in VR. This manuscript’s intent is to subjectively investigate factors of high priority that affect a user’s QoE in terms of perceptual quality, presence, and cy

APA, Harvard, Vancouver, ISO, and other styles

42

Fang, Hai Rong, Zhi Hong Chen, and Yue Fa Fang. "A Novel Spherical Parallel Manipulator with Circular Guide." Applied Mechanics and Materials 325-326 (June 2013): 1014–18. http://dx.doi.org/10.4028/www.scientific.net/amm.325-326.1014.

Full text

Abstract:

In this paper, a novel 3-degree-of-freedom (DOF) parallel manipulator that can perform three rotations around the remote centre is presented. The theory of screws and reciprocal screws is employed for the analysis of the geometric conditions. In particular, using circular guide to instead of R joints, so that has the advantage of enabling continuous 360° revolute around Z-axis. The inverse kinematics of mechanism is given and the workspace has a good performance. To compare with the machine constructed with traditional joints, it has the advantage of high rigidity and precision.

APA, Harvard, Vancouver, ISO, and other styles

43

Zhang, Dong Sheng, Wei Zhang, and Xu Feng Wang. "Technical Research on Fully-Mechanized Fast Drivage for Deep Large Sections of Coal-Rock Roadway in High Stress." Applied Mechanics and Materials 94-96 (September 2011): 1936–40. http://dx.doi.org/10.4028/www.scientific.net/amm.94-96.1936.

Full text

Abstract:

Based on the achieved engineering practice results of deep roadway drivage in Xinwen Mining Area, aimed at drivage problem of deep cross-level coal-rock, EBZ-135 fully-excavating machine had been used to replace traditional roadway blasting drivage, corresponding key technology of fast supporting for deep large sections of coal-rock roadway in high stress had been proposed, and latter mating transport system transformation of fully-mechanized fast drivage technology had been cooperated, which formed a suit of fully-mechanized fast drivage technology for deep large sections of coal-rock roadway

APA, Harvard, Vancouver, ISO, and other styles

44

Zhang, Zhao, Anand Kumar Pothula, and Renfu Lu. "Economic Evaluation of Apple Harvest and In-Field Sorting Technology." Transactions of the ASABE 60, no. 5 (2017): 1537–50. http://dx.doi.org/10.13031/trans.12226.

Full text

Abstract:

Abstract. The U.S. apple industry, which generated more than $2.7 billion in revenue at the farm gate in 2013, is facing critical challenges with decreased availability of labor and increased labor and production costs. To address these challenges, a self-propelled apple harvest and in-field sorting machine is being developed in our laboratory. This article reports on the economic evaluation of this prototype machine by considering machine cost (annual ownership and operating costs), harvest productivity increase (including that due to decreased occupational injuries), and cost savings in post

APA, Harvard, Vancouver, ISO, and other styles

45

Piao, Lin Hua, Yan Jie Li, Bai Hua Li, Ming Ming Ji, and Xue Yan Zhang. "The Research of Micromachined Airflow Omnibearing Level Posture Sensor." Advanced Materials Research 108-111 (May 2010): 1061–65. http://dx.doi.org/10.4028/www.scientific.net/amr.108-111.1061.

Full text

Abstract:

The paper firstly introduced the sensitive mechanism of micromachined airflow omnibearing level posture. Adopt micro-machine technology, octagonal sense organ is sensitive to omnibearing level posture. Signal processing circuit is composed by pre-signal circuit and digital circuit, to obtain voltage, omnibearing signal synthesis and resolution compensation of omnibearing tile angle signal. It is testified that: resolution<0.1°,the scope of azimuth is 360°,the scope of tile angle is 20°. The sensor is not only in small size but also in simply crafting. It is good in sensitive organ’s output

APA, Harvard, Vancouver, ISO, and other styles

46

Liu, Chun Jie, Yang Yang Xu, and Xiao Yan Zhang. "Study on Durability of Concrete with Machine-Made Sand Part I: Time-Dependent Chloride Penetration." Applied Mechanics and Materials 438-439 (October 2013): 3–9. http://dx.doi.org/10.4028/www.scientific.net/amm.438-439.3.

Full text

Abstract:

As part of the studies on the durability of concrete with machine-made sand, this paper introduces the test results and the forecast model of time-dependent chloride penetration of this kind of concrete. Three strength grades of concrete C30, C40 and C50, and the contents of stone powder in machine-made sand of 5%, 9% and 13% in mass were considered in the mix proportion of concrete with machine-made sand. The ordinary concrete with natural river sand in the same strength grade was tested at the same time for comparison. The test was conducted for 360 days, the results showed that the effect o

APA, Harvard, Vancouver, ISO, and other styles

47

Pan, Li Yun, Jian Dong Liu, Lun Li, and Xiao Ke Li. "Properties of MSFAC Long-Term Exposure to Sodium Sulfate Solution." Applied Mechanics and Materials 438-439 (October 2013): 25–29. http://dx.doi.org/10.4028/www.scientific.net/amm.438-439.25.

Full text

Abstract:

Experiments were conducted to study sulfate attack on concrete made machine-made sand and fly ash (MSFAC). The cubes with dimensions of 100 mm were cast and immersed in sodium solution with sulfate-ion concentration of 50000mg/L and tested after exposed for 30, 90, 180, 270, 360 and 540 days. The powder samples were made by steps of drilling, cutting and grinding. The sulfate-ion contents of concrete at different depths were measured by the chemical titration method. The results show that the sulfate-ion content of concrete decreased with depth, the sulfate-ion entered concrete by diffusion, p

APA, Harvard, Vancouver, ISO, and other styles

48

Li, Mao, Lina Ma, Wangyuan Zong, Chengming Luo, Muchang Huang, and Yang Song. "Design and Experimental Evaluation of a Form Trimming Machine for Horticultural Plants." Applied Sciences 11, no. 5 (2021): 2230. http://dx.doi.org/10.3390/app11052230.

Full text

Abstract:

Form trimming is an important practice in horticulture. Currently, handheld trimming tools are the most commonly used in China, which presents certain disadvantages including high human labor input, low productivity and inconsistent performance. In this work, a wheeled form trimming machine was designed for shrub plants with the aim of reducing labor input, increasing efficiency and improving trimming performance. The machine was mainly composed of three parts: a supporting frame, a rotary base and a knife system. The design and construction of the key components of the machine were introduced

APA, Harvard, Vancouver, ISO, and other styles

49

Kiruba Nagini R., S. Uma Devi, and Sayed Mohamed. "A Proposal on Developing a 360° Agile Organizational Structure by Superimposing Matrix Organizational Structure with Cross-functional Teams." Management and Labour Studies 45, no. 3 (2020): 270–94. http://dx.doi.org/10.1177/0258042x20922108.

Full text

Abstract:

With the growing business opportunities and expanding boundaries, the organizational structure of the companies is becoming highly dynamic with several levels flattened out and branching out horizontally, instead of being vertical. With agility required in all fast-evolving organizations, it is essential to check out for the suitability of the modern organizational structures prevalent, being classified by Mintzberg as ‘entrepreneurial or simple structure, machine bureaucracy, professional bureaucracy, divisional form, and adhocracy or innovative’ (Mintzberg, 1980; Lunenburg, 2012). In this ar

APA, Harvard, Vancouver, ISO, and other styles

50

Gandomi, Mostafa, Moharram Dolatshahi Pirooz, Iman Varjavand, and Mohammad Reza Nikoo. "Permeable Breakwaters Performance Modeling: A Comparative Study of Machine Learning Techniques." Remote Sensing 12, no. 11 (2020): 1856. http://dx.doi.org/10.3390/rs12111856.

Full text

Abstract:

The advantage of permeable breakwaters over more traditional types has attracted great interest in the behavior of these structures in the field of engineering. The main objective of this study is to apply 19 well-known machine learning regressors to derive the best model of innovative breakwater hydrodynamic behavior with reflection and transmission coefficients as the target parameters. A database of 360 laboratory tests on the low-scale breakwater is used to establish the model. The proposed models link the reflection and transmission coefficients to seven dimensionless parameters, includin

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!