Relevant bibliographies by topics / Machine to Machine

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Machine to Machine'

Author: Grafiati
Published: 4 June 2021
Last updated: 16 June 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Machine to Machine.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Machine to Machine"

1

M. Brandao, Iago, and Cesar da Costa. "FAULT DIAGNOSIS OF ROTARY MACHINES USING MACHINE LEARNING." Eletrônica de Potência 27, no. 03 (2022): 1–8. http://dx.doi.org/10.18618/rep.2022.3.0013.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Zhong, Wenbin, Wenhan Zeng, Guoyu Yu, and Xiangqian Jiang. "Development of an on-machine surface measurement system for an ultra-precision five-axis machine." MATEC Web of Conferences 401 (2024): 13007. http://dx.doi.org/10.1051/matecconf/202440113007.

Full text
Abstract:
Ever-increasing demand for complex freeform surfaces machined by ultra-precision five-axis machines necessitates efficient on-machine surface measurement (OMSM) systems. While OMSM offers significant advantages in metrology efficiency and machining accuracy, integrating it with these machines presents a challenge due to complex data synchronization and processing. This paper addresses this challenge by proposing a dedicated controller for synchronized acquisition of sensor measurement data and machine coordinate data. Additionally, a straightforward sensor alignment method is presented. The effectiveness of the proposed OMSM system is demonstrated through successful 2D and 3D measurements, significantly streamlining the traditional time-consuming offline coordinate measuring machine (CMM) and optical profilometer measurements.
APA, Harvard, Vancouver, ISO, and other styles
3

Nekhaev, Andrey. "Machine Wars: Machina Humeana." Sotsiologicheskoe Obozrenie / Russian Sociological Review 14, no. 3 (2015): 9–47. http://dx.doi.org/10.17323/1728-192x-2015-3-9-47.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Fischer, Peer. "A machine from machines." Nature Physics 14, no. 11 (2018): 1072–73. http://dx.doi.org/10.1038/s41567-018-0247-0.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Caye, Pierre. "La machine des machines." Le Visiteur N° 27, no. 1 (2022): 19–24. http://dx.doi.org/10.3917/visit.027.0020.

Full text
Abstract:
La ville est la grande affaire de notre temps. Depuis 2008, plus de la moitié de la population mondiale vit en ville. Et nous serons probablement près de 60 % en 2030. L’attraction démographique de la ville est renforcée par son dynamisme économique. Elle est devenue le lieu central de la production et de l’innovation, le cœur du système productif et de son organisation économique. La ville contemporaine apparaît d’abord comme un mégasystème technique, le système des systèmes, l’infrastructure qui rassemble à la fois les superstructures et les autres infrastructures ou, mieux encore, la machine des machines qui interconnecte les différents réseaux structurant la vie urbaine. Mais la machine des machines n’est pas un moyen de production comme un autre, du même ordre que les machines qu’elle coordonne. La ville donne un autre sens à la notion de machine, et c’est pourquoi elle est appelée à jouer un rôle fondamental dans la transformation productive, à partir du moment du moins où est prise en compte la spécificité de sa conception et de son intelligence.
APA, Harvard, Vancouver, ISO, and other styles
6

Sabeti, Behnam, Hossein Abedi Firouzjaee, Reza Fahmi, Saeid Safavi, Wenwu Wang, and Mark D. Plumbley. "Credit Risk Rating Using State Machines and Machine Learning." International Journal of Trade, Economics and Finance 11, no. 6 (2020): 163–68. http://dx.doi.org/10.18178/ijtef.2020.11.6.683.

Full text
Abstract:
Credit risk is the possibility of a loss resulting from a borrower’s failure to repay a loan or meet contractual obligations. With the growing number of customers and expansion of businesses, it’s not possible or at least feasible for banks to assess each customer individually in order to minimize this risk. Machine learning can leverage available user data to model a behavior and automatically estimate a credit score for each customer. In this research, we propose a novel approach based on state machines to model this problem into a classical supervised machine learning task. The proposed state machine is used to convert historical user data to a credit score which generates a data-set for training supervised models. We have explored several classification models in our experiments and illustrated the effectiveness of our modeling approach.
APA, Harvard, Vancouver, ISO, and other styles
7

Levi, Federico. "A machine to help machines." Nature Physics 15, no. 12 (2019): 1210. http://dx.doi.org/10.1038/s41567-019-0753-8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Trott, David. "Deceiving Machines: Sabotaging Machine Learning." CHANCE 33, no. 2 (2020): 20–24. http://dx.doi.org/10.1080/09332480.2020.1754067.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Raval, Shreeom, Harshil Raval, Darshit Seta, and Rathour Anilkumar. "DESIGN AND DEVELOPMENT OF MULTI SPINDLE DRILLING MACHINE." International Journal of Innovative Research in Advanced Engineering VII, no. VI (2020): 299–304. https://doi.org/10.26562/ijirae.2020.v0706.003.

Full text
Abstract:
This paper discusses the case study and comparison with productivity of component using traditional drilling machine to Multi spindle drilling machine. The growth of Indian manufacturing sector depends upon many factors, one of the major factors being manufacturing efficiency with which the operation /activities are carried out in the organization. Productivity can be improved by reducing the total machining time, combining the operations, etc. There are frequent needs of tightening and loosening screws, drilling, tapping, boring and grinding operational machines. Huge and complicated designed parts cannot be machined in ordinary machines. In a single machine all the above specified operations can be carried out after drilling operation by removing of drill head and using the required tools like grinding, tapping can etc. By this we can achieve our industrial requirements and production targets. Here we are going to develop a single multi spindle drilling machine which can useful for drilling multiholes and tapping operations in single setup of work piece.
APA, Harvard, Vancouver, ISO, and other styles
10

Sayapin, S. N., O. O. Bryyndina, and P. G. Vanina. "New Approach to Three-Coordinate Milling of Large-Sized Surfaces of Second Order." Proceedings of Higher Educational Institutions. Маchine Building, no. 12 (741) (December 2021): 19–28. http://dx.doi.org/10.18698/0536-1044-2021-12-19-28.

Full text
Abstract:
The study introduces a new approach to precision machining of large-sized surfaces of second order on a three-coordinate horizontal milling machine. The new technology does not require the use of unique large-size boring lathes or five-axis milling machines. Three-axis horizontal milling machines do not need to be equipped with additional equipment that provides the workpiece with the missing rotational and translational movements relative to the machine table. The proposed technology is based on the use of a new approach that combines the geometric parameters of the second-order machined surface, the spherical surface of the cutting tool, i.e. cutter, and their position relative to the working table. The use of the developed technology will improve the efficiency and accuracy of machining the surface of second order, as well as simplify the control program and technological support due to the absence of movable equipment. The study gives an example of practical implementation and shows the possibility of independent control of the machined parabolic surface geometry using a three-coordinate horizontal milling machine.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Machine to Machine"

1

Tebbifakhr, Amirhossein. "Machine Translation For Machines." Doctoral thesis, Università degli studi di Trento, 2021. http://hdl.handle.net/11572/320504.

Full text
Abstract:
Traditionally, Machine Translation (MT) systems are developed by targeting fluency (i.e. output grammaticality) and adequacy (i.e. semantic equivalence with the source text) criteria that reflect the needs of human end-users. However, recent advancements in Natural Language Processing (NLP) and the introduction of NLP tools in commercial services have opened new opportunities for MT. A particularly relevant one is related to the application of NLP technologies in low-resource language settings, for which the paucity of training data reduces the possibility to train reliable services. In this specific condition, MT can come into play by enabling the so-called “translation-based” workarounds. The idea is simple: first, input texts in the low-resource language are translated into a resource-rich target language; then, the machine-translated text is processed by well-trained NLP tools in the target language; finally, the output of these downstream components is projected back to the source language. This results in a new scenario, in which the end-user of MT technology is no longer a human but another machine. We hypothesize that current MT training approaches are not the optimal ones for this setting, in which the objective is to maximize the performance of a downstream tool fed with machine-translated text rather than human comprehension. Under this hypothesis, this thesis introduces a new research paradigm, which we named “MT for machines”, addressing a number of questions that raise from this novel view of the MT problem. Are there different quality criteria for humans and machines? What makes a good translation from the machine standpoint? What are the trade-offs between the two notions of quality? How to pursue machine-oriented objectives? How to serve different downstream components with a single MT system? How to exploit knowledge transfer to operate in different language settings with a single MT system? Elaborating on these questions, this thesis: i) introduces a novel and challenging MT paradigm, ii) proposes an effective method based on Reinforcement Learning analysing its possible variants, iii) extends the proposed method to multitask and multilingual settings so as to serve different downstream applications and languages with a single MT system, iv) studies the trade-off between machine-oriented and human-oriented criteria, and v) discusses the successful application of the approach in two real-world scenarios.
APA, Harvard, Vancouver, ISO, and other styles
2

Pincumbe, Nicholas James. "Deus ex machina the God machine /." Thesis, [Tuscaloosa, Ala. : University of Alabama Libraries], 2009. http://purl.lib.ua.edu/20.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Dinakar, Karthik. "Lensing Machines : representing perspective in machine learning." Thesis, Massachusetts Institute of Technology, 2017. http://hdl.handle.net/1721.1/112523.

Full text
Abstract:
Thesis: Ph. D., Massachusetts Institute of Technology, School of Architecture and Planning, Program in Media Arts and Sciences, 2017.<br>Cataloged from PDF version of thesis. Due to the condition of the original material with text runs off the edges of the pages, the reproduction may have unavoidable flaws.<br>Includes bibliographical references (pages 167-172).<br>Generative models are venerated as full probabilistic models that randomly generate observable data given a set of latent variables that cannot be directly observed. They can be used to simulate values for variables in the model, allowing analysis by synthesis or model criticism, towards an iterative cycle of model specification, estimation, and critique. However, many datasets represent a combination of several viewpoints - different ways of looking at the same data that leads to various generalizations. For example, a corpus that has data generated by multiple people may be mixtures of several perspectives and can be viewed with different opinions by others. It isn't always possible to represent the viewpoints by clean separation, in advance, of examples representing each perspective and train a separate model for each point of view. In this thesis, we introduce lensing, a mixed-initiative technique to (i) extract lenses or mappings between machine-learned representations and perspectives of human experts, and (2) generate lensed models that afford multiple perspectives of the same dataset. We explore lensing of latent variable model in their configuration, parameter and evidential spaces. We apply lensing to three health applications, namely imbuing the perspectives of experts into latent variable models that analyze adolescent distress and crisis counseling.<br>by Karthik Dinakar.<br>Ph. D.
APA, Harvard, Vancouver, ISO, and other styles
4

Lanarolle, W. D. Gamini. "Machine setting automation for circular weft-knitting machines." Thesis, University of Manchester, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.488354.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Roderus, Jens, Simon Larson, and Eric Pihl. "Hadoop scalability evaluation for machine learning algorithms on physical machines : Parallel machine learning on computing clusters." Thesis, Högskolan i Skövde, Institutionen för informationsteknologi, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:his:diva-20102.

Full text
Abstract:
The amount of available data has allowed the field of machine learning to flourish. But with growing data set sizes comes an increase in algorithm execution times. Cluster computing frameworks provide tools for distributing data and processing power on several computer nodes and allows for algorithms to run in feasible time frames when data sets are large. Different cluster computing frameworks come with different trade-offs. In this thesis, the scalability of the execution time of machine learning algorithms running on the Hadoop cluster computing framework is investigated. A recent version of Hadoop and algorithms relevant in industry machine learning, namely K-means, latent Dirichlet allocation and naive Bayes are used in the experiments. This paper provides valuable information to anyone choosing between different cluster computing frameworks. The results show everything from moderate scalability to no scalability at all. These results indicate that Hadoop as a framework may have serious restrictions in how well tasks are actually parallelized. Possible scalability improvements could be achieved by modifying the machine learning library algorithms or by Hadoop parameter tuning.
APA, Harvard, Vancouver, ISO, and other styles
6

Kent, W. F. "Machine learning for parameter identification of electric induction machines." Thesis, University of Liverpool, 2003. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.399178.

Full text
Abstract:
This thesis is concerned with the application of simulated evolution (SE) to the steady-state parameter identification problem of a simulated and real 3-phase induction machine, over the no-load direct-on-line start period. In the case of the simulated 3-phase induction machine, the Kron's two-axis dynamic mathematical model was used to generate the real and simulated system responses where the induction machine parameters remain constant over the entire range of slip. The model was used in the actual value as well as the per-unit system, and the parameters were estimated using both the genetic algorithm (GA) and the evolutionary programming (EP) from the machine's dynamic response to a direct-on-line start. Two measurement vectors represented the dynamic responses and all the parameter identification processes were subject to five different levels of measurement noise. For the case of the real 3-phase induction machine, the real system responses were generated by the real 3-phase induction machine whilst the simulated system responses were generated by the Kron's model. However, the real induction machine's parameters are not constant over the range of slip, because of the nonlinearities caused by the skin effect and saturation. Therefore, the parameter identification of a real3-phase induction machine, using EP from the machine's dynamic response to a direct-on-line start, was not possible by applying the same methodology used for estimating the parameters of the simulated, constant parameters, 3-phase induction machine.
APA, Harvard, Vancouver, ISO, and other styles
7

Sokola, Matija. "Vector control of induction machines using improved machine models." Thesis, Liverpool John Moores University, 1998. http://researchonline.ljmu.ac.uk/4899/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

El, Fawal Ahmad Hani. "Machine-to-machine communication congestion mechanism." Thesis, Brest, École nationale supérieure de techniques avancées Bretagne, 2018. http://www.theses.fr/2018ENTA0010/document.

Full text
Abstract:
Nos travaux s’orientent vers les problèmes de réseaux sans fil liés à la coexistence des communications machine-to-machine (M2M) et humain-humain (H2H). On souhaite souligner l'impact mutuel entre les trafics M2M et H2H dans un contexte d’Internet des objets (IoT : Internet Of Things) en particulier lors des catastrophes. Les communications M2M, qui devraient connaître une roissance exponentielle dans un avenir proche, constitueront un facteur important pour affecter tous les réseaux mobiles. On prévoit un grand nombre d'appareils M2M qui entraînera inévitablement des problèmes de saturation et aura des impacts remarquables sur les trafics, les services et les applications M2M et H2H. Pour étudier les influences mutuelles M2M et H2H, nous développons un nouveau modèle markovien à temps continu (CTMC) pour simuler, analyser et mesurer les différentes stratégies d'accès aux réseaux sans fil. Notre modèle nous a permis de contourner certaines limitations des simulateurs professionnels de LTE-A (Long Term Evolution-Advanced) comme SimuLTE en terme d’un nombre massif d'appareils M2M, une flexibilité de certains paramètres ou pour élaborer plus des outils statistiques. Lors d’un sinistre et suite à un énorme nombre de M2M souhaitant accéder aux réseaux sans-fil, nous avons constaté un épuisement rapide de la bande passante allouée dans les réseaux LTE-M (Long Term Evolution for Machines) ou Narrow Band for IoT (NB-IoT). Pour résoudre ce problème, nous proposons une nouvelle approche appelée Adaptive eNodeB (A-eNB) pour les réseaux LTE-M et NB-IoT. Selon nos simulations, l’A-eNB peut résoudre progressivement le problème de surcharge tout en assurant une satisfaisante qualité de service (QoS) pour le trafic H2H. Avec le concept d’A-eNB, un réseau LTE-M pourra adapter ses ressources pour faire face à une augmentation progressive du nombre de connexions M2M accédant au réseau LTE-M / NB-IoT et en même temps réduire l'impact sur le trafic H2H<br>This Ph.D. work aims to study the Machine-to-Machine (M2M) congestion overload problem and the mutual impact among M2M and Human-to-Human (H2H) traffics in IoT (Internet of Things) environments specifically during disaster events. M2M devices with their expected exponential booming in the near future, will be one of the significant factors to influence all mobile networks. Inevitably, the expected huge number of M2M devices causes saturation problems, and leads to remarkable impacts on both M2M and H2H traffics, services and applications. To study the M2M and H2H mutual influences, we create a new platform model based on Continuous-Time Markov Chain (CTMC) to simulate, analyze and measure radio access strategies due to the limitations of existing Long Term Evolution-Advanced (LTE-A) simulators (i.e, SimuLTE) in term of massive M2M devices, parameter flexibility and statistical tools. Additionally, during disaster events, a fast bandwidth depletion of the limited bandwidth assigned to M2M devices in Long Term Evolution for Machines (LTE-M) and Narrow Band for IoT (NB-IoT) networks is expected due to the high arrival request of M2M device network access. To address this problem, we propose a new approach named Adaptive eNodeB (A-eNB) for both LTE-M and NB-IoT networks. The A-eNB can solve gradually the overload problem, while keeping the H2H traffic Quality of Service (QoS) not to be affected badly. The network adaptation is provided through a dynamic LTE-M resource reservation aiming to increase the number of M2M connections accessing the LTE-M/NB-IoT network and to decrease the impact on H2H traffic
APA, Harvard, Vancouver, ISO, and other styles
9

Wright, David N. "Machine." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2000. http://www.collectionscanada.ca/obj/s4/f2/dsk2/ftp03/MQ47767.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Hack, Byron Wallis John 1963. "Man to machine, machine to machine and machine to instrument interfaces for teleoperation of a fluid handling laboratory." Thesis, The University of Arizona, 1988. http://hdl.handle.net/10150/276764.

Full text
Abstract:
The purpose of this thesis is the design of the software necessary for teleoperation of a fluid handling laboratory. It does not include the implementation of this software. The laboratory for which it is designed is being developed at the University of Arizona, and is a model of the fluid handling laboratory aboard Space Station. The software includes man/machine, machine/machine, and machine/instrument interfaces. The man/machine interface is menu driven and consists of high level commands which are independent of the devices in the laboratory. The machine/machine interface is also device independent. It consists of intermediary commands and maps the commands of the man/machine interface into the low level, device dependent, commands and programs of the machine/instrument interface. Although the software is primarily designed for the model laboratory, the needs of a remotely operated fluid handling laboratory aboard Space Station have been considered.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Machine to Machine"

1

Iannucci, Robert A. Parallel Machines: Parallel Machine Languages. Springer US, 1990. http://dx.doi.org/10.1007/978-1-4613-1543-8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

David, Barlam, and Nystrom Frederic E, eds. Machine elements: Life and design. CRC Press, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Katharina, Dohm, Stahlhut Heinz, Schirn Kunsthalle Frankfurt, and Museum Jean Tinguely Basel, eds. Kunstmaschinen Maschinenkunst =: Art machines Machine art. Kehrer, 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Schie, Hidde van, 1978- writer of supplementary textual content, ed. Idiosyncratic machine: Idiosyncratische machine. Art Paper Editions, 2019.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Esposito, Anthony. Machine design. 2nd ed. Delmar Publishing, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Narayana, K. L. Machine drawing. 3rd ed. New Age International (P) Ltd., Publishers, 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Esposito, Anthony. Machine design. 2nd ed. Delmar Publishers, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Adolphsen, Peter. Machine. MacAdam/Cage, 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Adolphsen, Peter. Machine. Samleren, 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Hamill, Denis. Machine. Sphere, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Machine to Machine"

1

Bringsjord, Selmer, Naveen Sundar Govindarajulu, Shreya Banerjee, and John Hummel. "Do Machine-Learning Machines Learn?" In Studies in Applied Philosophy, Epistemology and Rational Ethics. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-96448-5_14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Xu, Jin. "Probe Machine." In Biological Computing. Springer Nature Singapore, 2025. https://doi.org/10.1007/978-981-96-3870-3_9.

Full text
Abstract:
Abstract This chapter introduces an underlying fully parallel computing model—the probe machine. Unlike traditional Turing machines, the probe machine overcomes the limitations of sequential computation by enabling any two data to process information simultaneously without relying on linear adjacency. This fully parallel computing mechanism makes the probe machine highly efficient in solving complex problems, typically requiring only one or a few probe operations to obtain all solutions.
APA, Harvard, Vancouver, ISO, and other styles
3

Bourgeau, Thomas, Hakima Chaouchi, and Pinar Kirci. "Machine-to-Machine Communications." In Next-Generation Wireless Technologies. Springer London, 2013. http://dx.doi.org/10.1007/978-1-4471-5164-7_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Sathi, Arvind. "Machine-to-Machine Interfaces." In Cognitive (Internet of) Things. Palgrave Macmillan US, 2016. http://dx.doi.org/10.1057/978-1-137-59466-2_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Knoll, Thomas, Alexander Lautz, and Nicolas Deuß. "Machine-To-Machine Communication." In Handbuch Industrie 4.0. Springer Berlin Heidelberg, 2020. http://dx.doi.org/10.1007/978-3-662-58530-6_84.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Snider, Alvin. "Machine." In Encyclopedia of Renaissance Philosophy. Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-02848-4_942-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Weik, Martin H. "machine." In Computer Science and Communications Dictionary. Springer US, 2000. http://dx.doi.org/10.1007/1-4020-0613-6_10798.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Heßler, Martina. "Machine." In Handbook of the Anthropocene. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-25910-4_157.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Unal, Ceyda, Muhammed Taha Zeren, Furkan Kaya, et al. "Ex Machine, Next Machine, and Still Biased Machine." In Artificial Intelligence. CRC Press, 2024. http://dx.doi.org/10.1201/9781003483571-14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Javed, Adeel. "IoT Patterns: Machine to Machine." In Building Arduino Projects for the Internet of Things. Apress, 2016. http://dx.doi.org/10.1007/978-1-4842-1940-9_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Machine to Machine"

1

Al-ani, M. M. J., S. P. Lee, and J. M. Allport. "Integrated Electrical Machine-Turbo Machinery." In ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/gt2017-63429.

Full text
Abstract:
Global warming and climate change due to rising levels of greenhouse gases have placed significant pressure on the automobile industry to adopt more clean fuel, transportation electrification, and waste energy recovery technologies. As a result, several electrically assisted or driven turbo-machines have been proposed such as turbochargers, turbo-compressors, and electrical boosters. Therefore, the electrification of turbo-machinery has been trending for the past decade. All the systems mentioned above consist of a conventional electrical machine connected to the turbo-machinery by a shaft, making the system relatively large, heavy, costly and mechanically complex. In this paper, an integrated electrical machine-turbo machinery concept is proposed. It consists of an electrical machine mounted around a salient rotor that is shaped like an axial flow turbo-machinery wheel. The electrical machine can be used as a motor to drive or assist the operation of the turbo-machine or it can operate as a generator powered by the gas or fluid flow. Compared to the conventional electrically derived or assisted turbo-machine systems, the proposed system is expected to decrease the overall size, weight and complexity. In order to illustrate this concept, an initial multi-physics feasibility study is presented. Electromagnetic and mechanical, performance are calculated and investigated using FEA. Additionally, aerodynamic consideration has been illustrated.
APA, Harvard, Vancouver, ISO, and other styles
2

Bojic, Iva, and Mario Kusek. "Self-synchronization of Nonidentical Machines in Machine-to-Machine Systems." In 2013 IEEE 7th International Conference on Self-Adaptive and Self-Organizing Systems (SASO). IEEE, 2013. http://dx.doi.org/10.1109/saso.2013.39.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Wang, Sunran, and Hongyu Di. "Machine intelligence and intelligent machines." In 2011 International Conference on Fluid Power and Mechatronics (FPM). IEEE, 2011. http://dx.doi.org/10.1109/fpm.2011.6045814.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Bacon, David F. "Session details: Machine machinery." In OOPSLA05: ACM SIGPLAN Object Oriented Programming Systems and Applications Conference. ACM, 2005. http://dx.doi.org/10.1145/3244455.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Morris, Cameron, Vedang Chauhan, and Sunny Panchal. "AI-Based Machine Condition Monitoring System." In ASME 2024 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2024. https://doi.org/10.1115/imece2024-144456.

Full text
Abstract:
Abstract This paper describes the approach for an AI-based machine condition monitoring system that utilizes machine learning (ML) and deep learning (DL) techniques to monitor and analyze the condition of machines in various industries. This system employs advanced algorithms and ML models to continuously collect data from sensors, such as vibration sensors, level sensors, and vision sensors, among others. By analyzing this data, the AI system can detect anomalies, predict potential failures, and provide valuable insights into the health and performance of the machines. To demonstrate the feasibility of the concept, the system has been created and implemented for a rotating bowl feeder, a common piece of machinery used for the orientation of parts. Parts ranging from small washers to long-length screws can be dropped into a bowl feeder to be oriented for the next process. As parts become larger and more complex, bowl feeders tend to have more difficulty feeding parts at a high rate (200 to 300 parts/min) and can experience jams. This issue can be compounded if an operator is working on other machinery and doesn’t notice a fault immediately. This paper focuses on using AI for bowl condition monitoring using an ultrasonic level sensor, vibration sensor, part counting sensor, and vision sensor.
APA, Harvard, Vancouver, ISO, and other styles
6

Rasnic, Russ, and Joe A. Capps. "Machine Guarding, Lockout/Tagout, and the Interlocked Guard." In ASME 2004 International Mechanical Engineering Congress and Exposition. ASMEDC, 2004. http://dx.doi.org/10.1115/imece2004-60445.

Full text
Abstract:
Unguarded or poorly guarded machinery claims many limbs and lives each year. Similarly, injuries from machinery undergoing maintenance and/or cleaning operations are far too numerous. Machine guarding and related machinery violations continue to rank in the top 10 in OSHA citations. The lists of types of machines and their associated hazards, as well as the types of injuries are too lengthy to mention. Maximizing the effectiveness of safeguards is essential for protecting workers from preventable injuries. One of the most effective means of machinery guarding is the interlocking guard, which is a device that shuts off or disables a machine function when a guard or cover is removed or opened. Interlocking guards are an important component of guarding safety. Often, an interlocked guard is the only type of guard that can be used. This paper presents several scenarios where the interlocking guard was the best available technology for handling the hazard. Interlocks are a rapidly developing field. The advantages and drawbacks of interlocks are discussed, as well as the different types of interlocks available.
APA, Harvard, Vancouver, ISO, and other styles
7

Otsubo, Tatsuki, Takanori Yazawa, Jinhui Wang, and Tomonori Kato. "Diamond Fly Cutting Applied to Improve Curved Surface Machining by In-Process Measurement and Control on an Ordinary Milling Machine." In JSME 2020 Conference on Leading Edge Manufacturing/Materials and Processing. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/lemp2020-8590.

Full text
Abstract:
Abstract To improve the accuracy of the machined surface produced by an ordinary milling machine, a system called workpiece-referred form accuracy control (WORFAC) was developed and confirmed in diamond turning. However, non-rotational symmetric surface structures, such as V-grooves, pyramid structures, F-theta lenses, and other free form surface cannot be machined by diamond turning. We proposed to improve the form accuracy of a machined surface produced by an ordinary milling machine by diamond fly cutting using controlled cutting with reference surface (CCRS), an in-process measurement and control method. Fly cutting is usually used to manufacture ultra-precision microstructures with nanometric surface roughness and submicrometric form accuracy, without the need for subsequent polishing. Nevertheless, a high level of accuracy has only recently been achieved on ultra-precision milling machines. In this study, we verified the effectiveness of fly cutting with CCRS on an ordinary milling machine. CCRS improves machined surface accuracy by controlling the relative displacement between the tool and workpiece. Diamond fly cutting using CCRS was demonstrated to reduce the table motion error on an ordinary milling machine. The experiments of curved surface machining by uncontrolled machining and control machining were conducted, and the effectiveness of improving the circular are machining accuracy of the general-purpose milling machine was confirmed.
APA, Harvard, Vancouver, ISO, and other styles
8

Baek, Ji Min, Kyeong Ha Lee, Seung Ho Lee, and Ja Choon Koo. "Cost Effective On-Site Fault Diagnosis Home Appliance Using a Smart Phone and Support Vector Machine." In ASME 2019 28th Conference on Information Storage and Processing Systems. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/isps2019-7445.

Full text
Abstract:
Abstract One of the common rotating machines of the consumer electronics might be a washing machine. The rotating machinery normally suffers mechanical failures even during daily operations that results in poor performance or shortening lifetime of the machine. Therefore, engineers have been interested in the earliest fault diagnosis of the rotating machine. Existing fault diagnosis methods for rotating machines have used fast fourier transform (FFT) method in frequency domain to detect abnormal frequency. However, it is difficult to diagnose using the FFT method if the normal frequency components of the rotating machines overlaps with the fault frequencies. In this paper, sets of acoustic signals generated by the washing machines are collected by using a smart phone in which an inexpensive microphone is equipped, and collected data are analyzed using a new algorithm, which combining the skewness, kurtosis, A-weighting filter, high-pass filter (HPF), and FFT. The analyzed data is applied to support vector machine (SVM) to determine defect existence. The proposed algorithm solves the disadvantages of the existing method and is accurate enough to discriminate the data collected by the cheap microphone of the smart phone.
APA, Harvard, Vancouver, ISO, and other styles
9

Kozhenkov, A., E. Z. Naeini, and K. Prindle. "Machine Learning and Learning from Machines." In Progress’19. European Association of Geoscientists & Engineers, 2019. http://dx.doi.org/10.3997/2214-4609.201953052.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Centner, Matthias. "Machine design software for induction machines." In 2008 International Conference on Electrical Machines (ICEM). IEEE, 2008. http://dx.doi.org/10.1109/icelmach.2008.4800202.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Machine to Machine"

1

Vesselinov, Velimir Valentinov. Machine Learning. Office of Scientific and Technical Information (OSTI), 2019. http://dx.doi.org/10.2172/1492563.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Valiant, L. G. Machine Learning. Defense Technical Information Center, 1993. http://dx.doi.org/10.21236/ada283386.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Loscalzo, Steven, Nathaniel Gmelli, and Robert Wright. Machine Intelligence. Defense Technical Information Center, 2013. http://dx.doi.org/10.21236/ada580353.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Angrist, Joshua, and Brigham Frandsen. Machine Labor. National Bureau of Economic Research, 2019. http://dx.doi.org/10.3386/w26584.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Chase, Melissa P. Machine Learning. Defense Technical Information Center, 1990. http://dx.doi.org/10.21236/ada223732.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Klarer, P. R. Flocking small smart machines: An experiment in cooperative, multi-machine control. Office of Scientific and Technical Information (OSTI), 1998. http://dx.doi.org/10.2172/573344.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Wei, Jie. AGS Machine Studies. Office of Scientific and Technical Information (OSTI), 1994. http://dx.doi.org/10.2172/1119436.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Stoner, William W. Adaptive Machine Vision. Defense Technical Information Center, 1989. http://dx.doi.org/10.21236/ada208130.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Boscher, C., P. Cheval, L. Wu, and E. Gray. LDP State Machine. RFC Editor, 2002. http://dx.doi.org/10.17487/rfc3215.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Stoner, William W., Michael H. Brill, and Doreen W. Bergeron. Adaptive Machine Vision. Defense Technical Information Center, 1988. http://dx.doi.org/10.21236/ada197039.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Machine to Machine' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography