Log in

Relevant bibliographies by topics / Manual Drafting

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers

Academic literature on the topic 'Manual Drafting'

Author: Grafiati

Published: 4 June 2021

Last updated: 3 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Manual Drafting.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Manual Drafting"

1

Johnston, George Barnett. "Drafting Manuals and Manual Training: Rouillion and Ramsey'sArchitectural Details." Journal of Architectural Education 58, no. 4 (2005): 41–52. http://dx.doi.org/10.1162/1046488054026732.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Callieri, M., P. Cignoni, R. Scopigno, G. Gori, and M. Risaliti. "Beyond manual drafting: a restoration-oriented system." Journal of Cultural Heritage 7, no. 3 (2006): 214–26. http://dx.doi.org/10.1016/j.culher.2006.06.002.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

G. W. T. C. Kandamby, G. W. T. C. Kandamby. "Effectiveness of Continuous Assessment for Manual Drafting of Building Drawings." International Journal of Civil, Structural, Environmental and Infrastructure Engineering Research and Development 11, no. 2 (2021): 1–10. http://dx.doi.org/10.24247/ijcseierdapr20211.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Fomenko, A. E. "Drafting a Health and Safety Guide for Construction Forensics Practitloners." Theory and Practice of Forensic Science 13, no. 3 (2018): 71–73. http://dx.doi.org/10.30764/1819-2785-2018-13-3-71-73.

Full text

Abstract:

Presented is a draft occupational health and safety manual for construction forensics practitioners. The draft guide was developed with the purpose of improving the reliability of workplace health and safety arrangements in construction forensics units within the system of the Russian Ministry of Justice. The expert community is invited to consider the proposed draft document.

APA, Harvard, Vancouver, ISO, and other styles

5

Le May, Denis. "Pour un manuel de légistique." Les Cahiers de droit 21, no. 3-4 (2005): 993–1007. http://dx.doi.org/10.7202/042416ar.

Full text

Abstract:

The purpose of this paper is to advocate the creation of a legislative drafting manual that would suit the needs of all those concerned with the legislative process. The order and editing of the Manual are examined in two successive parts. The proposed Manual outlines an editing, conservation and retrieval method. A comprehensive classification scheme would cover all steps, all aspects and all fields of legislation. An editor / coordinator would assure control and follow-up on the Manual which would be published in parts, through a Bulletin. The classification scheme would allow users to class

APA, Harvard, Vancouver, ISO, and other styles

6

Stewart, G. "The Promulgation of Penal Provisions." Victoria University of Wellington Law Review 27, no. 3 (1997): 487. http://dx.doi.org/10.26686/vuwlr.v27i3.6104.

Full text

Abstract:

The following is an extract from a larger piece of research undertaken for the Law Commission's Drafting Manual project, one aspect of which deals with the legislative drafting of penal provisions. Within that area, specific issues arose such as: Should an offence be created at all? What are the factual elements of the offence? What mental element is appropriate? What defences are to be available? How should the provisions be promulgated (e.g., in a statute? in regulations? in rules?)? This article addresses the problems raised by that last issue.

APA, Harvard, Vancouver, ISO, and other styles

7

Batog, Ionel. "Cad Development - User Custom Drafting Extensions." Applied Mechanics and Materials 657 (October 2014): 745–49. http://dx.doi.org/10.4028/www.scientific.net/amm.657.745.

Full text

Abstract:

Many companies use Computer-Aided Design & Drafting (CADD) systems to create design drawings. Using CADD design as a replacement of the manual drafting method is only a fraction of its potential. The work that is done repeatedly can be in most cases performed automatically through customization. Customization of standard CAD packages can significantly increase productivity. The custom functions and programs can extend the capabilities of CAD packages to perform a wide range of drafting tasks. The paper discusses a customization strategy intended to facilitate completion of some repetitive

APA, Harvard, Vancouver, ISO, and other styles

8

Mandeville, David E. "Job characteristic perceptions of manual drafting and CADD: A field study of the effects of computerization on drafting & design personnel." Computers & Industrial Engineering 13, no. 1-4 (1987): 406–10. http://dx.doi.org/10.1016/0360-8352(87)90124-0.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Ulin, S. S., T. J. Armstrong, and R. G. Radwin. "Use of computer aided drafting for analysis and control of posture in manual work." Applied Ergonomics 21, no. 2 (1990): 143–51. http://dx.doi.org/10.1016/0003-6870(90)90137-m.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

YUKI, Hironobu, and Yuki KAWASHIMA. "Quantitative Evaluation of the Tone of Lines in Manual Drafting Based on Acoustic Emission Signals." Proceedings of Mechanical Engineering Congress, Japan 2017 (2017): S2020105. http://dx.doi.org/10.1299/jsmemecj.2017.s2020105.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Manual Drafting"

1

Yeung, Kai-hing Lionel. "The changing curriculum : from manual drafting to computer aided design (CAD) /." Hong Kong : University of Hong Kong, 1998. http://sunzi.lib.hku.hk/hkuto/record.jsp?B20057453.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Yeung, Kai-hing Lionel, and 楊啓興. "The changing curriculum: from manual draftingto computer aided design (CAD)." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1998. http://hub.hku.hk/bib/B31960571.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

AL-MOUSA, NADYA. "AN EXAMINATION OF CAD USE IN TWO INTERIOR DESIGN PROGRAMS FROM THE PERSPECTIVES OF CURRICULUM AND INSTRUCTORS." Thesis, 2013. http://hdl.handle.net/1974/7905.

Full text

Abstract:

The overall purpose of this study was to examine the nature of curriculum in college-level interior design programs, explore computer-aided design’s (CAD) place in these curricula, and examine pedagogy used to teach CAD in these programs. Specifically, the objectives of this study were to better understand (a) the nature of college-level interior design programs with regard to curricular conceptions, (b) how interior design programs integrate CAD into the curriculum, and (c) how interior design instructors adopt and integrate CAD into their teaching practices. A qualitative research methodolog

APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Manual Drafting"

1

New York (State). Legislative Bill Drafting Commission. Bill drafting manual. State of New York Legislative Bill Drafting Commission., 2002.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

New York (State). Legislative Bill Drafting Commission. Bill drafting manual. State of New York Legislative Bill Drafting Commission, 2005.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

New York (State). Legislative Bill Drafting Commission. Bill drafting manual. State of New York Legislative Bill Drafting Commission, 2005.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

Connecticut. Manual for drafting regulations. Legislative Commissioners' Office, 2000.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

Michigan. Legislative Service Bureau. Legal Drafting Division. Michigan legislative drafting manual. Legislative Service Bureau, Legal Drafting Division, 1986.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

Illinois. General Assembly. Legislative Reference Bureau. Illinois bill drafting manual. Legislative Reference Bureau, 1994.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

North Dakota. Legislative Assembly. Legislative Council. Administrative rules drafting manual. North Dakota Legislative Council, 1990.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

Council, Indiana General Assembly Legislative. Administrative rules drafting manual. Indiana Legislative Council, 1990.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

Senate, Massachusetts General Court. Legislative drafting and legal manual. 2nd ed. Massachusetts Senate, 2001.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

United States. Western Area Power Administration. Drafting standards: Engineering manual, 6403.4A. U.S. Dept. of Energy, Western Area Power Administration, 1991.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Manual Drafting"

1

"Drafting." In Manual for UN Delegates. United Nations, 2011. http://dx.doi.org/10.18356/0373fc6a-en.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

"Critique for Drafting." In Becoming a Public Relations Writer Instructor's Manual. Routledge, 2013. http://dx.doi.org/10.4324/9781315045528-18.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

"CM Requirements for Drafting Standards." In Engineering Documentation Control/Configuration Management Standards Manual. John Wiley & Sons, Inc., 2018. http://dx.doi.org/10.1002/9781119479314.ch3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Vugia, Duc J., Richard A. Goodman, James L. Hadler, and Danice K. Eaton. "Initiating Operations." In The CDC Field Epidemiology Manual. Oxford University Press, 2019. http://dx.doi.org/10.1093/oso/9780190933692.003.0002.

Full text

Abstract:

In response to an outbreak of disease of public health importance, a city, county, or state health department can request field epidemiologic assistance from the next higher level public health agency. In the United States, the highest level public health agency is the Centers for Disease Control and Prevention. To ensure smooth communications, planning, and execution of an epidemiologic field investigation, as well as to maintain good relationships from the initiation of the investigation to the final report, several operational aspects should be addressed. Key elements of operationalizing an epidemiologic field investigation include the following: 1) initial request and communications between inviters and invitees and a formal invitation for assistance from an authorized official; 2) clarification of the investigation’s main objectives and roles and responsibilities of those involved; 3) preparation of the field team for departure; 4) initial in-person meeting of the field team with local health officials and collaborators to review and update the situation, review local resources and primary points of contact, and identify a local public information officer; 5) management of field team activities with lists of necessary tasks for team members and frequent communications within the team, between team leader and senior supervisor, and between team and local officials; 6) in-person debriefing meeting with preliminary findings and recommendations by field team before departure; and 7) drafting of the final report with full findings and recommendations. Field investigations will proceed more smoothly and productively if both inviters and invitees adequately address key operational aspects before, during, and after the investigation.

APA, Harvard, Vancouver, ISO, and other styles

5

Olatunji, Oluwole Alfred, and William David Sher. "A Comparative Analysis of 2D Computer-Aided Estimating (CAE) and BIM Estimating Procedures." In Handbook of Research on Building Information Modeling and Construction Informatics. IGI Global, 2010. http://dx.doi.org/10.4018/978-1-60566-928-1.ch008.

Full text

Abstract:

Most estimators are trained with, and are used to, manual and Computer-Aided Design and Drafting (CADD) two dimensional (2D) drawings. The spatio-temporal limitations of these designs complicate information management, estimators’ judgments, speed and accuracy. In addition, conventional estimating practices also need to cater to the nuances of diverse standard methods of measurements (SMM) and unstable market conditions. Building Information Modeling (BIM) promises major improvements that overcome the limitations of conventional 2D methods in both design and construction processes. It provides platforms for value integration, robust information sources, simultaneous access to design database, automated quantification, project visualization and simulation, among others capabilities. These capabilities facilitate accuracy, objective risk assessment, comprehensive information management and early integration of cost management principles during design. Arguably, the uptake of Information Technology (IT) in construction is increasing and this discipline-specific study on BIM highlights its considerable potential for improving professional service delivery. Consequently, the integration of BIM and process driven Computer-Aided Estimating (CAE) tools and applications provide robust opportunities for process improvement in Architectural, Engineering, Construction and Facilities Management (AECFM) industries. As part of a research initiative, this chapter reviews the impacts of BIM on cost estimating procedures. In a bid to develop a conceptual framework for underpinning BIM-propelled changes in estimating practice, CAE applications are categorized and compared. Moreover, some features for producing automated quantities from BIMs are compared with provisions of SMM used by estimators. The research concludes with recommendations about the capacity of BIM to revolutionize construction procurement and systems.

APA, Harvard, Vancouver, ISO, and other styles

6

R., Muthuminal. "An Overview on 3D Site Modelling in Civil Engineering." In Recent Advances in 3D Imaging, Modeling, and Reconstruction. IGI Global, 2020. http://dx.doi.org/10.4018/978-1-5225-5294-9.ch005.

Full text

Abstract:

In past decades, for developing a site, engineers used the process of creating a scale model in order to determine their behaviour and to sketch the details collected manually using the drafting process, which behaves as a referring material during the construction of structures. Due to the boom in technology and limitations in drafting, the drawings have been digitized using computer-aided design (CAD) software as a two-dimensional structure (2D). Currently, these drawings are detailed as a three-dimensional structure (3D) that is briefly noted as 3D modelling. Three-dimensional site modelling is an active area that is involved in research and development of models in several fields that has been originated from the scale modelling. In this chapter, the topic 3D site modelling in civil engineering is discussed. First of all, the basic concepts of scale modelling, architectural modelling, and structural modelling are discussed. Then the concept of virtual-based 3D site modelling, its importance, benefits, and steps involved in site modelling are briefed.

APA, Harvard, Vancouver, ISO, and other styles

7

Lau, Bryony. "The Philippines." In Territory and Power in Constitutional Transitions. Oxford University Press, 2019. http://dx.doi.org/10.1093/oso/9780198836544.003.0011.

Full text

Abstract:

This chapter examines how political interests in Mindanao and in Manila have made it difficult to resolve the territorial cleavage in southern Philippines, even though the 1987 Constitution envisioned Muslim autonomy within the unitary republic. It first provides a historical background on the Muslim insurgency in Mindanao, led by the Moro National Liberation Front (MNLF) and later, the Moro Islamic Liberation Front (MILF). It also considers the 1976 Tripoli agreement signed under martial law, the drafting of the 1987 Constitution, and the creation of the Autonomous Region of Muslim Mindanao in 1989. It goes on to describe the period of constitutional engagement and more specifically, the “constitutional moment” for resolving the Mindanao question that began in mid-2010. Finally, it analyzes the outcome of the peace talks between the government and the Moro insurgents, along with some of significant the lessons that can be drawn from the experience.

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Manual Drafting"

1

Kitto, Kathleen L. "Integrating Microcomputer Applications Into Engineering Technology Programs." In ASME 1994 International Computers in Engineering Conference and Exhibition and the ASME 1994 8th Annual Database Symposium collocated with the ASME 1994 Design Technical Conferences. American Society of Mechanical Engineers, 1994. http://dx.doi.org/10.1115/cie1994-0484.

Full text

Abstract:

Abstract Engineering students graduating today face a fast-paced, competitive marketplace where the push to reduce cycle times for product time-to-market, to reduce part count, part cost and assembly time and improve quality and reliability seems to increase almost daily. New Computer Aided Engineering (CAE) tools to help the engineering, design and manufacturing team accomplish these goals also seem to be introduced at a phenomenal rate. Considering the facts that CAE technology is advancing at such a rapid rate and that the global marketplace pressures are also expanding at a rapid rate, eng

APA, Harvard, Vancouver, ISO, and other styles

2

Atiqullah, Mir M. "Machine Design Project and Mechanics Education." In ASME 2009 International Mechanical Engineering Congress and Exposition. ASMEDC, 2009. http://dx.doi.org/10.1115/imece2009-12952.

Full text

Abstract:

Traditional machine design is essentially applied mechanics and builds upon engineering mechanics topics: strength of materials, statics and dynamics. The current Mechanical Engineering Technology program includes a sequence of mechanics courses leading to the upper level course of Machine Design. Our program emphasizes strong background in computer aided modeling and drafting as well as manufacturing, a combination much appreciated by the employers in the region. Thus our senior class is well prepared for the capstone machine design course which requires not only an electronic design solution

APA, Harvard, Vancouver, ISO, and other styles

3

Das, Atish K., and Noshir A. Langrana. "Implementation of a Comprehensive Vectorization System for Engineering Drawings." In ASME 1995 15th International Computers in Engineering Conference and the ASME 1995 9th Annual Engineering Database Symposium collocated with the ASME 1995 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1995. http://dx.doi.org/10.1115/cie1995-0739.

Full text

Abstract:

Abstract A large number of engineering drawings which are being used in the industry today are old drawings which were created manually on paper using conventional drafting methods. The benefits of the existing CAD/CAM systems are not available to these drawings since these drawings were created on paper. Hence, an automated system which will scan and convert these drawings into CAD files recognizable by the existing CAD/CAM systems is very desirable. An important element in the conversion process is the automatic recognition of dimensional information which is used to denote the exact size an

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!