Relevant bibliographies by topics / Manufacturing ceramic materials

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Manufacturing ceramic materials'

Author: Grafiati
Published: 4 June 2021
Last updated: 9 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Manufacturing ceramic materials.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Manufacturing ceramic materials"

1

Amaral, S. P., and G. H. Domingues. "Oily Wastes Application in Ceramic Materials Manufacturing." Water Science and Technology 24, no. 12 (December 1, 1991): 165–76. http://dx.doi.org/10.2166/wst.1991.0381.

Full text
Abstract:
The application of oily residues produced by PETRÓLEO BRASILEIRO S.A. -PETROBRÁS in the manufacturing of ceramic bricks appears as a promising alternative of their reutilization, in comparison with the traditional method of storage in ponds or dikes and to the biodégradation process by landfarming. The application of said residues started experimentally in 1988, in a ceramic bricks factory located in the Paraíba do Sul Valley, State of São Paulo, near the Henrique Lage Refinery (REVAP). In mid-1989, the Presidente Bernardes Refinery (RPBC), the Capuava Refinery (RECAP) and the Petroleum Products Terminals of São Paulo (TEDEP) started sending oily residues to factories participating in the Red Ceramics Association of Itu and its Region (ACERVIR). As an advantage of this process, almost all the costs with disposal of said residues are eliminated for PETROBRÁS; on the other hand, the reduction in maintenance costs, lower energy consumption, and a significant increase in production are advantages for the ceramics factories.
APA, Harvard, Vancouver, ISO, and other styles
2

Liu, Bing Feng. "Properties and Manufacturing Method of Silicon Carbide Ceramic New Materials." Applied Mechanics and Materials 416-417 (September 2013): 1693–97. http://dx.doi.org/10.4028/www.scientific.net/amm.416-417.1693.

Full text
Abstract:
Ceramic industry developed rapidly in recent years, a greater demand for new materials. SiC ceramics as one of candidate materials that a few suitable for use high-temperature structural parts, shows its unique advantages in the high temperature, thermal shock, corrosive and other harsh environments. Its high temperature performance and application potential has attracted people's attention, but its properties make it difficult sintering at atmospheric pressure, unable to meet the needs of industrial production. Pressure less sintering technology has become the key in its application promotion. As strong antioxidant activity, better abrasion resistance, hardness, thermal stability, high temperature strength, thermal expansion coefficient, thermal conductivity and thermal shock and great chemical resistance and other excellent characteristics, Silicon carbide ceramics are widely used in various fields. Based on the silicon carbide ceramic materialisms development process, characteristics, international research and proposed several status of sintering silicon carbide ceramic, and discuss its development trends.
APA, Harvard, Vancouver, ISO, and other styles
3

He, Rujie, Niping Zhou, Keqiang Zhang, Xueqin Zhang, Lu Zhang, Wenqing Wang, and Daining Fang. "Progress and challenges towards additive manufacturing of SiC ceramic." Journal of Advanced Ceramics 10, no. 4 (July 18, 2021): 637–74. http://dx.doi.org/10.1007/s40145-021-0484-z.

Full text
Abstract:
AbstractSilicon carbide (SiC) ceramic and related materials are widely used in various military and engineering fields. The emergence of additive manufacturing (AM) technologies provides a new approach for the fabrication of SiC ceramic products. This article systematically reviews the additive manufacturing technologies of SiC ceramic developed in recent years, including Indirect Additive Manufacturing (Indirect AM) and Direct Additive Manufacturing (Direct AM) technologies. This review also summarizes the key scientific and technological challenges for the additive manufacturing of SiC ceramic, and also forecasts its possible future opportunities. This paper aims to provide a helpful guidance for the additive manufacturing of SiC ceramic and other structural ceramics.
APA, Harvard, Vancouver, ISO, and other styles
4

Lakhdar, Y., C. Tuck, J. Binner, A. Terry, and R. Goodridge. "Additive manufacturing of advanced ceramic materials." Progress in Materials Science 116 (February 2021): 100736. http://dx.doi.org/10.1016/j.pmatsci.2020.100736.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Travitzky, Nahum, Alexander Bonet, Benjamin Dermeik, Tobias Fey, Ina Filbert-Demut, Lorenz Schlier, Tobias Schlordt, and Peter Greil. "Additive Manufacturing of Ceramic-Based Materials." Advanced Engineering Materials 16, no. 6 (April 8, 2014): 729–54. http://dx.doi.org/10.1002/adem.201400097.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Schönherr, Julia Anna, Sonja Baumgartner, Malte Hartmann, and Jürgen Stampfl. "Stereolithographic Additive Manufacturing of High Precision Glass Ceramic Parts." Materials 13, no. 7 (March 25, 2020): 1492. http://dx.doi.org/10.3390/ma13071492.

Full text
Abstract:
Lithography based additive manufacturing (AM) is one of the most established and widely used 3D-printing processes. It has enabled the processing of many different materials from thermoplast-like polymers to ceramics that have outstanding feature resolutions and surface quality, with comparable properties of traditional materials. This work focuses on the processing of glass ceramics, which have high optical demands, precision and mechanical properties specifically suitable for dental replacements, such as crowns. Lithography-based ceramic manufacturing (LCM) has been chosen as the optimal manufacturing process where a light source with a defined wavelength is used to cure and structure ceramic filled photosensitive resins. In the case of glass ceramic powders, plastic flow during thermal processing might reduce the precision, as well as the commonly observed sintering shrinkage associated with the utilized temperature program. To reduce this problem, particular sinter structures have been developed to optimize the precision of 3D-printed glass ceramic crowns. To evaluate the precision of the final part, testing using digitizing methods from optical to tactile systems were utilized with the best results were obtained from micro computed tomography (CT) scanning. These methods resulted in an optimized process allowing for possible production of high precision molar crowns with dimensional accuracy and high reproducibility.
APA, Harvard, Vancouver, ISO, and other styles
7

Hassanin, Hany, Khamis Essa, Amr Elshaer, Mohamed Imbaby, Heba H. El-Mongy, and Tamer A. El-Sayed. "Micro-fabrication of ceramics: Additive manufacturing and conventional technologies." Journal of Advanced Ceramics 10, no. 1 (January 18, 2021): 1–27. http://dx.doi.org/10.1007/s40145-020-0422-5.

Full text
Abstract:
AbstractCeramic materials are increasingly used in micro-electro-mechanical systems (MEMS) as they offer many advantages such as high-temperature resistance, high wear resistance, low density, and favourable mechanical and chemical properties at elevated temperature. However, with the emerging of additive manufacturing, the use of ceramics for functional and structural MEMS raises new opportunities and challenges. This paper provides an extensive review of the manufacturing processes used for ceramic-based MEMS, including additive and conventional manufacturing technologies. The review covers the micro-fabrication techniques of ceramics with the focus on their operating principles, main features, and processed materials. Challenges that need to be addressed in applying additive technologies in MEMS include ceramic printing on wafers, post-processing at the micro-level, resolution, and quality control. The paper also sheds light on the new possibilities of ceramic additive micro-fabrication and their potential applications, which indicates a promising future.
APA, Harvard, Vancouver, ISO, and other styles
8

Ziesche, Steffen, Adrian Goldberg, Uwe Partsch, Holger Kappert, Heidrun Kind, Mirko Aden, and Falk Naumann. "On-turbine multisensors based on Hybrid Ceramic Manufacturing Technology." Additional Conferences (Device Packaging, HiTEC, HiTEN, and CICMT) 2019, HiTen (July 1, 2019): 000107–11. http://dx.doi.org/10.4071/2380-4491.2019.hiten.000107.

Full text
Abstract:
Abstract The contribution evaluates the potential of piezoresistive multilayer ceramic sensory solutions using Low or High Temperature Cofired Ceramics (LTCC/HTCC) for on-turbine sensors. Relevant ceramic materials were characterized and evaluated with regard to applicability and reliability under application-like conditions. A multilayer ceramic sensory element was designed including a ceramic embedded pressure sensing membrane, a Pt100 temperature sensor and ceramic integrated wiring. Appropriate sealing methods to implement the ceramic into metal housings as well as electrical connection solutions were worked out, which allow for an operation under the increased temperatures (> 300°C) of the application. A system concept, including sensory element, signal conditioning electronics, mechanical and electrical interfaces is part of the investigation.
APA, Harvard, Vancouver, ISO, and other styles
9

Spitznagel, F. A., J. Boldt, and P. C. Gierthmuehlen. "CAD/CAM Ceramic Restorative Materials for Natural Teeth." Journal of Dental Research 97, no. 10 (June 15, 2018): 1082–91. http://dx.doi.org/10.1177/0022034518779759.

Full text
Abstract:
Advances in computer-aided design (CAD) / computer-aided manufacturing (CAM) technologies and their ease of application enabled the development of novel treatment concepts for modern prosthodontics. This recent paradigm shift in fixed prosthodontics from traditional to minimally invasive treatment approaches is evidenced by the clinical long-term success of bonded CAD/CAM glass-ceramic restorations. Today, defect-oriented restorations, such as inlays, onlays, and posterior crowns, are predominately fabricated from glass-ceramics in monolithic application. The variety of CAD/CAM ceramic restorative systems is constantly evolving to meet the increased demands for highly aesthetic, biocompatible, and long-lasting restorations. Recently introduced polymer-infiltrated ceramic network CAD/CAM blocks add innovative treatment options in CAD/CAM chairside 1-visit restorations. The material-specific high-edge stability enables the CAD/CAM machinability of thin restoration margins. Full-contour zirconia restorations are constantly gaining market share at the expense of bilayered systems. Advancements in material science and bonding protocols foster the development of novel material combinations or fabrication techniques of proven high-strength zirconia ceramics. CAD/CAM applications offer a standardized manufacturing process resulting in a reliable, predictable, and economic workflow for individual and complex teeth-supported restorations. More evidence from long-term clinical studies is needed to verify the clinical performance of monolithic polymer-infiltrated ceramic network and zirconia teeth-supported minimally invasive and extensive restorations.
APA, Harvard, Vancouver, ISO, and other styles
10

Chugunov, Svyatoslav, Nikolaus A. Adams, and Iskander Akhatov. "Evolution of SLA-Based Al2O3 Microstructure During Additive Manufacturing Process." Materials 13, no. 18 (September 5, 2020): 3928. http://dx.doi.org/10.3390/ma13183928.

Full text
Abstract:
Evolution of additively manufactured (AM) ceramics’ microstructure between manufacturing stages is a hardly explored topic. These data are of high demand for advanced numerical modeling. In this work, 3D microstructural models of Al2O3 greenbody, brownbody and sintered material are presented and analyzed, for ceramic samples manufactured with SLA-based AM workflow, using a commercially available ceramic paste and 3D printer. The novel data, acquired at the micro- and mesoscale, using Computed Tomography (CT), Scanning Electron Microscopy (SEM) and Focused Ion-Beam SEM (FIB/SEM) techniques, allowed a deep insight into additive ceramics characteristics. We demonstrated the spatial 3D distribution of ceramic particles, an organic binder and pores at every stage of AM workflow. The porosity of greenbody samples (1.6%), brownbody samples (37.3%) and sintered material (4.9%) are analyzed. Pore distribution and possible originating mechanisms are discussed. The location and shape of pores and ceramic particles are indicative of specific physical processes driving the ceramics manufacturing. We will use the presented microstructural 3D models as input and verification data for advanced numerical simulations developed in the project.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Manufacturing ceramic materials"

1

de, Caussin Dylan Robert. "Design and Testing of a Top Mask Projection Ceramic Stereolithography System for Ceramic Part Manufacturing." DigitalCommons@CalPoly, 2016. https://digitalcommons.calpoly.edu/theses/1625.

Full text
Abstract:
Ceramic manufacturing is an expensive process with long lead times between the initial design and final manufactured part. This limits the use of ceramic as a viable material unless there is a large project budget or high production volume associated with the part. Ceramic stereolithography is an alternative to producing low cost parts through the mixing of a photo curable resin and ceramic particles. This is an additive manufacturing process in which each layer is built upon the previous to produce a green body that can be sintered for a fully dense ceramic part. This thesis introduces a new approach to ceramic stereolithography with a top mask projection light source which is much more economical compared to current vector scanning methods. The research goes through the design and development of a stereolithography printer prototype capable of handling ceramics and the testing of different mixtures to provide the best printing results with varying viscosities. The initial testing of this printer has created a starting point for top mask projection as an economical alternative to current ceramic manufacturing techniques.
APA, Harvard, Vancouver, ISO, and other styles
2

Snelling, Dean Andrew Jr. "A Process for Manufacturing Metal-Ceramic Cellular Materials with Designed Mesostructure." Diss., Virginia Tech, 2015. http://hdl.handle.net/10919/51606.

Full text
Abstract:
The goal of this work is to develop and characterize a manufacturing process that is able to create metal matrix composites with complex cellular geometries. The novel manufacturing method uses two distinct additive manufacturing processes: i) fabrication of patternless molds for cellular metal castings and ii) printing an advanced cellular ceramic for embedding in a metal matrix. However, while the use of AM greatly improves the freedom in the design of MMCs, it is important to identify the constraints imposed by the process and its process relationships. First, the author investigates potential differences in material properties (microstructure, porosity, mechanical strength) of A356 — T6 castings resulting from two different commercially available Binder Jetting media and traditional 'no-bake' silica sand. It was determined that they yielded statistically equivalent results in four of the seven tests performed: dendrite arm spacing, porosity, surface roughness, and tensile strength. They differed in sand tensile strength, hardness, and density. Additionally, two critical sources of process constraints on part geometry are examined: (i) depowdering unbound material from intricate casting channels and (ii) metal flow and solidification distances through complex mold geometries. A Taguchi Design of Experiments is used to determine the relationships of important independent variables of each constraint. For depowdering, a minimum cleaning diameter of 3 mm was determined along with an equation relating cleaning distance as a function of channel diameter. Furthermore, for metal flow, choke diameter was found to be significantly significant variable. Finally, the author presents methods to process complex ceramic structure from precursor powders via Binder Jetting AM technology to incorporate into a bonded sand mold and the subsequently casted metal matrix. Through sintering experiments, a sintering temperature of 1375 °C was established for the ceramic insert (78% cordierite). Upon printing and sintering the ceramic, three point bend tests showed the MMCs had less strength than the matrix material likely due to the relatively high porosity developed in the body. Additionally, it was found that the ceramic metal interface had minimal mechanical interlocking and chemical bonding limiting the strength of the final MMCs.
Ph. D.
APA, Harvard, Vancouver, ISO, and other styles
3

Snelling, Jr Dean Andrew. "A Process for Manufacturing Metal-Ceramic Cellular Materials with Designed Mesostructure." Diss., Virginia Tech, 2003. http://hdl.handle.net/10919/51606.

Full text
Abstract:
The goal of this work is to develop and characterize a manufacturing process that is able to create metal matrix composites with complex cellular geometries. The novel manufacturing method uses two distinct additive manufacturing processes: i) fabrication of patternless molds for cellular metal castings and ii) printing an advanced cellular ceramic for embedding in a metal matrix. However, while the use of AM greatly improves the freedom in the design of MMCs, it is important to identify the constraints imposed by the process and its process relationships. First, the author investigates potential differences in material properties (microstructure, porosity, mechanical strength) of A356 — T6 castings resulting from two different commercially available Binder Jetting media and traditional 'no-bake' silica sand. It was determined that they yielded statistically equivalent results in four of the seven tests performed: dendrite arm spacing, porosity, surface roughness, and tensile strength. They differed in sand tensile strength, hardness, and density. Additionally, two critical sources of process constraints on part geometry are examined: (i) depowdering unbound material from intricate casting channels and (ii) metal flow and solidification distances through complex mold geometries. A Taguchi Design of Experiments is used to determine the relationships of important independent variables of each constraint. For depowdering, a minimum cleaning diameter of 3 mm was determined along with an equation relating cleaning distance as a function of channel diameter. Furthermore, for metal flow, choke diameter was found to be significantly significant variable. Finally, the author presents methods to process complex ceramic structure from precursor powders via Binder Jetting AM technology to incorporate into a bonded sand mold and the subsequently casted metal matrix. Through sintering experiments, a sintering temperature of 1375 °C was established for the ceramic insert (78% cordierite). Upon printing and sintering the ceramic, three point bend tests showed the MMCs had less strength than the matrix material likely due to the relatively high porosity developed in the body. Additionally, it was found that the ceramic metal interface had minimal mechanical interlocking and chemical bonding limiting the strength of the final MMCs.
Ph. D.
APA, Harvard, Vancouver, ISO, and other styles
4

Terner, Mark Robert. "The production of low-cost α-sialons via carbothermal reduction-nitridation of slag-based mixtures." Monash University, School of Physics and Materials Engineering, 2003. http://arrow.monash.edu.au/hdl/1959.1/9577.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Page, Lindsay V. "Feasibility of Fused Deposition of Ceramics with Zirconia and Acrylic Binder." DigitalCommons@CalPoly, 2016. https://digitalcommons.calpoly.edu/theses/1602.

Full text
Abstract:
Processing of ceramics has always been difficult due to how hard and brittle the material is. Fused Deposition of Ceramics (FDC) is a method of additive manufacturing which allows ceramic parts to be built layer by layer, abetting more complex geometries and avoiding the potential to fracture seen with processes such as grinding and milling. In the process of FDC, a polymeric binder system is mixed with ceramic powder for the printing of the part and then burned out to leave a fully ceramic part. This experiment investigates a new combination of materials, zirconia and acrylic binder, optimizing the process of making the material into a filament conducive to the printer system and then performing trials with the filament in the printer to assess its feasibility. Statistical analysis was used to determine optimal parameter levels using response surface methodology to pinpoint the material composition and temperature yielding the highest quality filament. It was discovered that although the mixture had adequate melting characteristics to be liquefied and printed into a part, the binder system did not provide the stiffness required to act as a piston to be fed through the printer head. Further studies should be completed continuing the investigation of zirconia and acrylic binder, but with added components to increase strength and rigidity of the filament.
APA, Harvard, Vancouver, ISO, and other styles
6

Koslowske, Mark T. "A process based cost model for multi-layer ceramic manufacturing of solid oxide fuel cells." Link to electronic thesis, 2003. http://www.wpi.edu/Pubs/ETD/Available/etd-0810103-173353.

Full text
Abstract:
Thesis (M.S.)--Worcester Polytechnic Institute.
Keywords: process based cost model; cost model; fuel cell; PBCM; multi-layer ceramics; sofc; solid oxide fuel cell. Includes bibliographical references.
APA, Harvard, Vancouver, ISO, and other styles
7

Rudel, Václav. "Obrábění keramických materiálů frézováním." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-232055.

Full text
Abstract:
In the diploma thesis dividing of ceramic materials is made, their bonds and other attributions, which define ceramic materials. There is also described how ceramic materials are manufactured and the thesis is including information about machining ceramic materials. In the experimental part sample of ceramic material R-S67K was machined by milling. During the experiment cutting forces were measured and roughness of surface after finishing, these data were finally evaluated.
APA, Harvard, Vancouver, ISO, and other styles
8

Myers, Kyle M. "Structure-Property Relationship of Binder Jetted Fused Silica Preforms to Manufacture Ceramic-Metallic Interpenetrating Phase Composites." Youngstown State University / OhioLINK, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=ysu1464089607.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Nichols, Brandon David. "Materials for manufacturing low-tech, low-cost ceramic water filters and the business models for their distribution in Central America." Thesis, University of British Columbia, 2016. http://hdl.handle.net/2429/59518.

Full text
Abstract:
Water is a critical resource to the human race, yet half the planet's population experiences water scarcity and 780 million people do not have access to clean water sources year round. For those with no other choice but to drink from contaminated water sources, they are at risk of contracting a broad range of diseases, most commonly diarrhoea, which the second largest killer of children under the age of five. Residents living in rural areas of developing countries are primarily at risk, lacking access to basic water infrastructure and medical services. To provide clean water to those in need requires culturally appropriate technology that is simple to construct and local made. Ceramic Water Filter Pots (CWFPs) consist of porous clay that acts as a filter, which is coated with silver nanoparticles creating a system capable of removing 99.995% of bacterial pathogens from drinking water and built in any community in the world. Working with a nationally recognized NGO based in Nicaragua, Potters for Peace (PfP), this study aimed to determine the limiting factors of production of CWFP by examining the materials used in three factories in Nicaragua, and the business model used in Guatemala based EcoFiltro. Field work was conducted in three factories in Nicaragua, and one factory in Guatemala. Visual observations of the production methods, testing protocols and business practices were documented visually and used to contrast the facilities production and businesses practices. Clay samples were collected from the Maysuta (n=2) and Filtron (n=3) factories to be analyzed at the University of British Columbia. The Atterberg limits were determined on the samples and X-ray diffraction analysis was used to determine the mineral makeup of the five samples and the percentage and type of clay in each. This study outlines the limits of clay composition, specifically montmorillonite, which can be used to manufacture ceramic water filters that make a viable ceramic filter, and contrasts the business models of two ceramic water manufacturers.
Applied Science, Faculty of
Graduate
APA, Harvard, Vancouver, ISO, and other styles
10

Gariboldi, Maria Isabella. "Effect of calcium phosphate ceramic architectural features on the self-assembly of microvessels in vitro." Thesis, University of Cambridge, 2018. https://www.repository.cam.ac.uk/handle/1810/283005.

Full text
Abstract:
One of the greatest obstacles to clinical translation of bone tissue engineering is the inability to effectively and efficiently vascularise scaffolds. This limits the size of defects that can be repaired, as blood perfusion is necessary to provide nutrient and waste exchange to tissue at the core of scaffolds. The goal of this work was to systematically explore whether architecture, at a scale of hundreds of microns, can be used to direct the growth of microvessels into the core of scaffolds. A pipeline was developed for the production of hydroxyapatite surfaces with controlled architecture. Three batches of hydroxyapatite were used with two different particle morphologies and size distributions. On sintering, one batch remained phase pure and the other two batches were biphasic mixtures of α-tricalcium phosphate (α-TCP) and hydroxyapatite. Sample production methods based on slip casting of a hydroxyapatite-gelatin slurry were explored. The most successful of these involved the use of curable silicone to produce moulds of high-resolution, three dimensional (3D) printed parts with the desired design. Parts were dried and sintered to produce patterned surfaces with higher resolution than obtainable through conventional 3D printing techniques. Given the difficulties associated with the structural reproducibility of concave pores architectures in 3D reported in the literature, in this work, a 2.5D model has been developed that varies architectural parameters in a controlled manner. Six contrasting architectures consisting of semi-circular ridges and grooves were produced. Grooves and ridges were designed to have widths of 330 μm and 660 μm, with periodicities, respectively, of 1240 μm and 630 μm. Groove depth was varied between 150 μm and 585 μm. Co-cultures of endothelial cells and osteoblasts were optimised and used to grow microcapillary-like structures (referred to as "microvessels") on substrates. Literature shows that these precursors to microcapillaries contain lumina and can produce functional vasculature, demonstrating their clinical promise. The effects of the composition and surface texture of grooved samples on microvessel formation were studied. It was found that surface microtopography and phase purity (α-TCP content) did not affect microvessel formation. However, hydroxyapatite architecture was found to significantly affect microvessel location and orientation. Microvessels were found to form predominantly in grooves or between convexities. Two metrics - the degree of alignment (DOA) and the degree of containment (DOC) - were developed to measure the alignment of endothelial cell structures and their localisation in grooves. For all patterned samples, the CD31 (an endothelial cell marker) signal was at least 2.5 times higher along grooves versus perpendicular to grooves. In addition, the average signal was at least two times higher within grooves than outside grooves for all samples. Small deep grooves had the highest DOA and DOC (6.13 and 4.05 respectively), and individual, highly aligned microvessels were formed. An image analysis method that compares sample X-ray microtomography sections to original designs to quantify architectural distortion was developed. This method will serve as a useful tool for improvements to architectural control for future studies. This body of work shows the crucial influence of architecture on microvessel self-assembly at the hundreds of micron scale. It also highlights that microvessel formation has a relatively low sensitivity to phase composition and microtopography. These findings have important implications for the design of porous scaffolds and the refinement of fabrication technologies. While important results were shown for six preliminary architectures, this work represents a toolkit that can be applied to screen any 2.5D architecture for its angiogenic potential. This work has laid the foundations that will allow elucidating the precise correspondence between architecture and microvessel organisation, ultimately enabling the "engineering" of microvasculature by tuning local scaffold design to achieve desirable microvessel properties.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Manufacturing ceramic materials"

1

International Symposium on Processing and Fabrication of Advanced Materials (14th 2005 Pittsburgh, Pa.). Processing and Fabrication of Advanced Materials XIV: With Frontiers in Materials Science 2005 : Innovative Materials & Manufacturing Techniques. Edited by Srivatsan T. S and Symposium on Frontiers in Materials Science (2005 : Pittsburgh, Pa.). Pittsburgh, PA: Materials Science & Technology 2005, 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Singh, M. Ceramic integration and joining technologies: From macro to nanoscale. Hoboken, N.J: Wiley-American Ceramic Society, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Singh, M. Ceramic integration and joining technologies: From macro to nanoscale. Hoboken, N.J: Wiley-American Ceramic Society, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Hackley, Vincent A. Guide to the nomenclature of particle dispersion technology for ceramic systems. Gaithersburg, MD: U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

International Symposium on Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials and Systems (3rd 2009 Daytona Beach, Fla.). Advanced processing and manufacturing technologies for structural and multifunctional materials III: A collection of papers presented at the 33rd International Conference on Advanced Ceramics and Composites, January 18-23, 2009, Daytona Beach, Florida. Edited by Ohji T. (Tatsuki), Singh M. (Mrityunjay), American Ceramic Society, and International Conference on Advanced Ceramics and Composites (33rd : 2009 : Daytona Beach, Fla.). Hoboken, N.J: Wiley, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

International Symposium on Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials and Systems (2nd 2008 Daytona Beach, Fla.). Advanced processing and manufacturing technologies for structural and multifunctional materials: A collection of papers presented at the 32nd International Conference on Advanced Ceramics and Composites, January 27-February 1, 2008, Daytona Beach, Florida. Edited by Ohji T. (Tatsuki), Singh M. (Mrityunjay), Wereszczak Andrew, American Ceramic Society, and International Conference on Advanced Ceramics and Composites (32nd : 2008 : Daytona Beach, Fla.). Hoboken, N.J: Wiley, 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

International Conference on Advanced Ceramics and Composites (35th 2011 Daytona Beach, Fla.). Advanced processing and manufacturing technologies for structural and multifunctional materials: A collection of papers presented at the 35th International Conference on Advanced Ceramics and Composites, January 18-23, 2011, Daytona Beach, Florida. Edited by Ohji T. (Tatsuki), Singh M. (Mrityunjay), Singh Dileep Dr, Widjaja Sujanto, ebrary Inc, American Ceramic Society, and International Symposium on Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials (3rd : 2009 : Daytona Beach, Fla.). Hoboken, NJ: Wiley, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

International Symposium on Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials and Systems (4th 2010 Daytona Beach, Fla.). Advanced processing and manufacturing technologies for structural and multifunctional materials: A collection of papers presented at the 34th International Conference on Advanced Ceramics and Composites, January 24-29, 2010, Daytona Beach, Florida. Edited by Ohji T. (Tatsuki), Singh M. (Mrityunjay), Mathur Sanjay, American Ceramic Society, and International Conference on Advanced Ceramics and Composites (34th : 2010 : Daytona Beach, Fla.). Hoboken, N.J: Wiley, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Farrands, Christopher. New materials in manufacturing industry: A European overview. London: Economist Intelligence Unit, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Bochenek, Dariusz. Technologia wytwarzania i właściwości multiferroikowej ceramiki typu PFN: Manufacturing technology and properties of the multiferroic PFN ceramics = [Tekhnologii︠a︡ poluchenii︠a︡ i svoĭstva mulʹtiferroika na primere keramiki tipa PFN]. Katowice: Wydawnictwo Uniwersytetu Ślaskiego, 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Manufacturing ceramic materials"

1

Xiufeng, Wang, Wang Jia, Fan Xiaopu, Yu Chenglong, Jiang Hongtao, Yang Yang, Li Hui, Cao Xinqiang, and Zhang Juanjuan. "Rapid Manufacturing of Ceramic Parts." In Advanced Processing and Manufacturing Technologies for Nanostructured and Multifunctional Materials III, 81–88. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2017. http://dx.doi.org/10.1002/9781119321736.ch9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Yang, Li, Hadi Miyanaji, Durga Janaki Ram, Amir Zandinejad, and Shanshan Zhang. "Functionally Graded Ceramic Based Materials Using Additive Manufacturing: Review and Progress." In Ceramic Transactions Series, 43–55. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2016. http://dx.doi.org/10.1002/9781119236016.ch5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Anish Mathews, Priya, Swati Koonisetty, Sanjay Bhardwaj, Papiya Biswas, Roy Johnson, and Padmanabham Gadhe. "Patent Trends in Additive Manufacturing of Ceramic Materials." In Handbook of Advanced Ceramics and Composites, 1–35. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-319-73255-8_57-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Anish Mathews, Priya, Swati Koonisetty, Sanjay Bhardwaj, Papiya Biswas, Roy Johnson, and G. Padmanabham. "Patent Trends in Additive Manufacturing of Ceramic Materials." In Handbook of Advanced Ceramics and Composites, 319–54. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-16347-1_57.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Sathiyamoorthy, R., K. Shanmugam, and K. Murugan. "Abrasive Wear Behaviour of Titanium and Ceramic-Coated Titanium." In Green Materials and Advanced Manufacturing Technology, 237–52. First edition. | Boca Raton, FL : CRC Press, 2021. | Series: Green engineering and technology: Concepts and applications: CRC Press, 2020. http://dx.doi.org/10.1201/9781003056546-16.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

de Lima, A. G. Barbosa, J. M. P. Q. Delgado, L. P. C. Nascimento, E. S. de Lima, V. A. B. de Oliveira, A. M. V. Silva, and J. V. Silva. "Clay Ceramic Materials: From Fundamentals and Manufacturing to Drying Process Predictions." In Advanced Structured Materials, 1–29. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-47856-8_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Lis, Jerzy. "Combustion Synthesis (SHS) of Complex Ceramic Materials." In Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials VII, 57–67. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118807965.ch7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Vieira, C. M. F., and L. F. Amaral. "Recycling of Grog by Addition Into Heavy Clay Ceramic Manufacturing." In Developments in Strategic Ceramic Materials II, 159–66. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2017. http://dx.doi.org/10.1002/9781119321811.ch15.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

da Silva Beltrão, Marilia Sérgio, Marysilvia Ferreira, and Célio A. Costa. "Polymethylsiloxane Derived Ceramics: Influence of Pyrolysis Temperature on Ceramic Phases." In Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials II, 123–59. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2009. http://dx.doi.org/10.1002/9780470456224.ch12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Heidenreich, Bernhard, Severin Hofmann, Markus Keck, Raouf Jemmali, Martin Friefiβ, and Dietmar Koch. "C/C-SiC Materials Based on Melt Infiltration - Manufacturing Methods and Experiences from Serial Production." In Ceramic Transactions Series, 295–310. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2014. http://dx.doi.org/10.1002/9781118932995.ch32.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Manufacturing ceramic materials"

1

Жукова, Вера, Елена Ожогина, Иван Бондарчук, Надежда Сычева, Юлия Шувалова, and Ольга Якушина. "Mineralogical materials study (manufacturing ceramic products)." In Mineralogical and technological appraisal of new types of mineral products. Petrozavodsk: Karelian Research Center of RAS, 2019. http://dx.doi.org/10.17076/tm13_7.

Full text
Abstract:
Basic mineralogical materials study as a science concerned with the study of the principles of selecting and manufacturing of materials from raw minerals are discussed. The results of the study of ceramic bricks, conducted to forecast blend composition and roasting regime for obtaining the various exploitation properties of the finished product are reported.
APA, Harvard, Vancouver, ISO, and other styles
2

Tesfay, Hayelom D., Yuzhu Xie, Zhigang Xu, Bing Yan, and Z. C. Li. "An Experimental Study on Edge Chipping in Ultrasonic Vibration Assisted Grinding of Bio-Ceramic Materials." In ASME 2013 International Manufacturing Science and Engineering Conference collocated with the 41st North American Manufacturing Research Conference. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/msec2013-1188.

Full text
Abstract:
Bio-ceramics have been widely employed in dental restorations, repairing bones, and joint replacements etc. due to their high compressive strength, superior wear resistance, and natural aesthetical appearance. Abrasive machining processes such as grinding have been used to obtain a smooth surface and desired dimensions for bio-ceramic parts. However, a major technical issue resulted from abrasive machining processes is edge chipping. The edge chipping could lead to the failure of bio-ceramics and has to be removed by downstream processes. It not only increases machining cost but also introduces potential deficiencies into the bio-ceramic parts. This paper present an experimental study on the edge chipping in ultrasonic vibration assisted grinding (UVAG) of bio-ceramic materials. An innovative UVAG system is developed and employed to machine three bio-ceramic materials (Lava, partially fired Lava, and Alumina). The effect of ultrasonic vibration on the edge chipping is investigated by observing under scanning electron microscope (SEM). The experimental results show that the edge chipping can be significantly reduced with the assistance of ultrasonic vibration. For the diamond grinding, there exist a lot of edge chippings along the machined slot edge that varies from 0.3 mm to 1.2 mm, whereas for the UVAG, there are only several tiny edge chippings with size from ∼0.03 mm to ∼0.1 mm along the machine slot edge. The results indicate that the UVAG system developed has a great potential to be used in production to improve bio-ceramic materials’ surface integrity, in particular, edge chipping quality.
APA, Harvard, Vancouver, ISO, and other styles
3

Quarles, Gregory. "Ceramic Lasers Summit: Manufacturing and Applications of Next-Generation Ceramic Laser Gain Materials." In Advanced Solid-State Photonics. Washington, D.C.: OSA, 2008. http://dx.doi.org/10.1364/assp.2008.wc3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Fess, Edward, Scott DeFisher, Mike Cahill, and Frank Wolfs. "Development of manufacturing technologies for hard optical ceramic materials." In SPIE Defense + Security, edited by Brian J. Zelinski. SPIE, 2015. http://dx.doi.org/10.1117/12.2180519.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Song, Xiao-Fei, Jianhui Peng, Ling Yin, and Bin Lin. "In Vitro Dental Cutting of Feldspar and Leucite Glass Ceramics Using an Electric Handpiece." In ASME 2012 International Manufacturing Science and Engineering Conference collocated with the 40th North American Manufacturing Research Conference and in participation with the International Conference on Tribology Materials and Processing. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/msec2012-7290.

Full text
Abstract:
Glass ceramics are important restorative materials in dentistry. They are used as veneer-core bilayer all-ceramic or metal-fused ceramic restorations or monolithic inlays/onlays/crowns to replace missing or damaged tooth structures for aesthetic and functional purposes. However, glass ceramic materials, such as feldspar and leucite glass ceramics, which are subject to this investigation, are brittle and easily induced microfractures in abrasive cutting using dental handpieces and coarse burs. In this paper, we investigated the dental abrasive cutting characteristics of feldspar and leucite glass ceramics using a high-speed electric handpiece and coarse diamond burs. Cutting forces, specific removal energy, surface roughness and morphology were investigated as functions of specific material removal rate and maximum undeformed chip thickness. The results indicate that increasing the specific material removal rate or the maximum undeformed chip thickness resulted in increases in both tangential and normal forces, but a decrease in specific removal energy for both ceramics. Tangential, normal forces and specific removal energy were significantly larger in up cutting than those in down cutting. Surface roughness for the two ceramics was not affected by the specific removal rate or the maximum undeformed chip thickness. Both microfrature and ductile microcutting morphology were observed in the machined surfaces for both ceramics. There existed a brittle to ductile transition trend when decreasing the specific material removal rate or the maximum undeformed chip thickness for the two ceramics. In comparison with feldspar glass ceramic, leucite glass ceramic generated better surfaces due to its more ductile deformation occurring in dental cutting.
APA, Harvard, Vancouver, ISO, and other styles
6

Weide, Kirsten, and Christian Keck. "Influence of different materials on the thermal behavior of a CDIP-8 ceramic package." In Microelectronic Manufacturing '99, edited by Sergio A. Ajuria and Jerome F. Jakubczak. SPIE, 1999. http://dx.doi.org/10.1117/12.361353.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Diptanshu, Erik Young, Chao Ma, Suleiman Obeidat, Bo Pang, and Nick Kang. "Ceramic Additive Manufacturing Using VAT Photopolymerization." In ASME 2018 13th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/msec2018-6389.

Full text
Abstract:
The popularity of additive manufacturing for producing porous bio-ceramics using vat photopolymerization in the recent years has gained a lot of impetus due to its high resolution and low surface roughness. In this study, a commercial vat polymerization printer (Nobel Superfine, XYZprinting) was used to create green bodies using a ceramic suspension consisting of 10 vol.% of alumina particles in a photopolymerizable resin. Four different sizes of cubical green bodies were printed out. They were subjected to thermal processing which included de-binding to get rid of the polymer and thereafter sintering for joining of the ceramic particles. The porosity percentage of the four different sizes were measured and compared. The lowest porosity was observed in the smallest cubes (5 mm). It was found to be 43.3%. There was an increase in the porosity of the sintered parts for the larger cubes (10, 15 and 20 mm). However, the difference in the porosity among these sizes was not significant and ranged from 61.5% to 65.2%. The compressive testing of the samples showed that the strength of the 5-mm cube was the maximum among all samples and the compressive strength decreased as the size of the samples increased. These ceramic materials of various densities are of great interest for biomedical applications.
APA, Harvard, Vancouver, ISO, and other styles
8

Huang, C. Z., H. L. Liu, J. Wang, and Z. W. Liu. "Study on Mechanical Properties of Multi-Scale and Multi-Phase Nanocomposite Ceramic Tool Materials." In ASME 2006 International Manufacturing Science and Engineering Conference. ASMEDC, 2006. http://dx.doi.org/10.1115/msec2006-21054.

Full text
Abstract:
The single nano-scale and multi-phase nanocomposite ceramic materials including Al2O3/Al2O3n/SiCn and Al2O3/Ti(C0.7N0.3)n/SiCn are successfully fabricated. Their mechanical properties are better than those of the single-phase alumina material and conventional alumina matrix materials. The multi-scale and single-phase nanocomposite ceramic tool material Al2O3/SiCμ/SiCn is also successfully fabricated. Its flexural strength and fracture toughness is higher than those of single-scale materials Al2O3/SiCμ and Al2O3/SiCn. The multi-scale and multi-phase nanocomposite ceramic tool material Al2O3/TiCμ/TiNn is finally developed by incorporation and dispersion of micro-scale TiC particle and nano-scale TiN particle in alumina matrix, which can get higher flexural strength and fracture toughness than those of Al2O3/TiC ceramic tool material without nano-scale TiN particle. The coexistent function of nano-scale Al2O3 or Ti(C0.7N0.3), nano-scale SiC and TiN can reduce the sintering temperature and sintering duration time as well as the grain size, and improve the material densification and mechanical properties. The nano-scale SiC grains locating along the grain boundary and inside the micro-scale alumina can form the hybria intergranular-intragranular microstructure which can result in hybria intergranular-transgranular fracture and improve the mechanical properties of the ceramic material. Crack deflection, forking and bridging effects are the main cause for improving the fracture toughness of the materials including Al2O3/Ti(C0.7N0.3)n/SiCn and Al2O3/TiCμ/TiNn.
APA, Harvard, Vancouver, ISO, and other styles
9

Wang, Heng, Xiaoxiao Chen, and Wenwu Zhang. "Research on picosecond laser processing technology of ceramic materials involving incident angle." In Advanced Laser Processing and Manufacturing III, edited by Yuji Sano, Jian Liu, Minghui Hong, Rongshi Xiao, and Jianhua Yao. SPIE, 2019. http://dx.doi.org/10.1117/12.2538899.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Mansfield, Brooke, Sabrina Torres, Tianyu Yu, and Dazhong Wu. "A Review on Additive Manufacturing of Ceramics." In ASME 2019 14th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/msec2019-2886.

Full text
Abstract:
Abstract Additive manufacturing (AM), also known as 3D printing, has been used for rapid prototyping due to its ability to produce parts with complex geometries from computer-aided design files. Currently, polymers and metals are the most commonly used materials for AM. However, ceramic materials have unique mechanical properties such as strength, corrosion resistance, and temperature resistance. This paper provides a review of recent AM techniques for ceramics such as extrusion-based AM, the mechanical properties of additively manufactured ceramics, and the applications of ceramics in various industries, including aerospace, automotive, energy, electronics, and medical. A detailed overview of binder-jetting, laser-assisted processes, laminated object manufacturing (LOM), and material extrusion-based 3D printing is presented. Finally, the challenges and opportunities in AM of ceramics are identified.
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Manufacturing ceramic materials"

1

Phifer, Carol Celeste, Erik David Spoerke, Terry J. Garino, Steven John Lockwood, James A. Voigt, Pin Yang, Julie T. Gibson, and Diana Lynn Moore. Development of a manufacturing capability for production of ceramic laser materials. Office of Scientific and Technical Information (OSTI), October 2007. http://dx.doi.org/10.2172/926379.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

McSpadden, SB. Addressing the Manufacturing Issues Associated with the use of Ceramic Materials for Diesel Engine Components. Office of Scientific and Technical Information (OSTI), September 2001. http://dx.doi.org/10.2172/814147.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Manufacturing ceramic materials' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography