Log in

Relevant bibliographies by topics / Manufacturing diagram / Journal articles

To see the other types of publications on this topic, follow the link: Manufacturing diagram.

Journal articles on the topic 'Manufacturing diagram'

Author: Grafiati

Published: 7 July 2024

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Manufacturing diagram.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Burlyaeva, E. V., V. V. Burlyaev, V. V. Kononenko, and V. S. Tsekhanovich. "Verification of functional models of chemical manufacturing." Fine Chemical Technologies 14, no. 4 (2019): 69–76. http://dx.doi.org/10.32362/2410-6593-2019-14-4-69-76.

Full text

Abstract:

A generalized algorithm for the verification of functional models and the rules for the verification of diagrams related by levels of detail were developed in this paper. The algorithm is based on the analysis of a tree which describes the decompose relations in functional diagrams. At each step of the algorithm, a pair consisting of a parent diagram and a functional diagram is selected, and the correlation of the arrows and their roles is checked for both. The formalization of the verification rules was based on the set-theoretic representation of functional diagrams in the form of labeled or

APA, Harvard, Vancouver, ISO, and other styles

2

Wang, Yan Hong, Tian Ying Xu, and Zhong Da Tian. "Modeling for Materials and Logistics Optimal System in JIT Flexible Manufacturing." Applied Mechanics and Materials 619 (August 2014): 359–63. http://dx.doi.org/10.4028/www.scientific.net/amm.619.359.

Full text

Abstract:

In this paper, we propose an autonomous material and logistics optimization system model for JIT flexible jobshop. The proposed system consists of a Material Planning subsystem (MPs), a Distribution Planning subsystem (DPs) and a Logistics Control subsystem (LCs). In the proposed system, all subsystems repeat their own optimal decision making as well as exchange production data with others. This mechanism made the whole system a closed-loop information and control system for material and logistics optimization. The unified model constructed up a framework for integrating of the production mana

APA, Harvard, Vancouver, ISO, and other styles

3

Burlyaeva, E. V., V. V. Burlyaev, and V. S. Tsekhanovich. "SET-THEORETIC DESCRITPION OF FUNCTIONAL MODELS OF CHEMICAL MANUFACTURING." Fine Chemical Technologies 12, no. 5 (2017): 71–78. http://dx.doi.org/10.32362/2410-6593-2017-12-5-71-78.

Full text

Abstract:

The technique for the formalized description of functional models of chemical manufacturing is developed. The technique is based on graph theory. The model is described as a set of oriented labeled graphs that are hierarchically organized by the decompose relationship. First we describe the conversion of a single diagram to a labeled graph, including adding new nodes and edges. The nodes of the graph correspond to boxes, borders and branching points of the arrows at the diagram. The edges of the graph correspond to the arrows at the diagram. The graph descriptions of the model of base function

APA, Harvard, Vancouver, ISO, and other styles

4

PAPADOPOULOU, EVANTHIA, and D. T. LEE. "THE HAUSDORFF VORONOI DIAGRAM OF POLYGONAL OBJECTS: A DIVIDE AND CONQUER APPROACH." International Journal of Computational Geometry & Applications 14, no. 06 (2004): 421–52. http://dx.doi.org/10.1142/s0218195904001536.

Full text

Abstract:

We study the Hausdorff Voronoi diagram of a set S of polygonal objects in the plane, a generalization of Voronoi diagrams based on the maximum distance of a point from a polygon, and show that it is equivalent to the Voronoi diagram of S under the Hausdorff distance function. We investigate the structural and combinatorial properties of the Hausdorff Voronoi diagram and give a divide and conquer algorithm for the construction of this diagram that improves upon previous results. As a byproduct we introduce the Hausdorff hull, a structure that relates to the Hausdorff Voronoi diagram in the same

APA, Harvard, Vancouver, ISO, and other styles

5

Halmešová, Kristýna, Radek Procházka, Martina Koukolíková, Jan Džugan, Pavel Konopík, and Tomasz Bucki. "Extended Continuous Cooling Transformation (CCT) Diagrams Determination for Additive Manufacturing Deposited Steels." Materials 15, no. 9 (2022): 3076. http://dx.doi.org/10.3390/ma15093076.

Full text

Abstract:

Continuous cooling transformation (CCT) diagrams are widely used when heat treating steels and represent which type of phase will occur in a material as it is cooled at different cooling rates. CCT diagrams are constructed on the basis of dilatometry measurements on relatively small testing samples (cylindrical shape with diameter of 4mm and length of 11 mm in this study). The main aim of this work was to demonstrate the possibility of evaluating the tensile test properties using mini-tensile tests from miniature volumes (1.4 × 10−7 m3 for one sample) subsequent to determination of the CCT dia

APA, Harvard, Vancouver, ISO, and other styles

6

Vishnu, Vivek, and Vineet Kumar Dwivedi. "ENHANCEMENT OF PRODUCTION BY LEAN MANUFACTURING METHOD." INTERNATIONAL RESEARCH JOURNAL OF ENGINEERING AND APPLIED SCIENCES 10, no. 1 (2022): 01–04. http://dx.doi.org/10.55083/irjeas.2022.v10i01001.

Full text

Abstract:

The thesis proposes a method for introducing lean manufacturing using string diagram in an operating CNG high pressure storage tank manufacturing job shop at Jayfe Cylinder Ltd. Haryana. By applying lean manufacturing using process layout diagram to produce part families with similar manufacturing processes and stable demand, plants expect to reduce costs and lead-times and improve quality and delivery performance. The thesis outlines a method for assessing, designing, and implementing lean manufacturing using process layout diagram, and illustrates this process with an example. A manufacturin

APA, Harvard, Vancouver, ISO, and other styles

7

Koleva, E., G. Kolev, and L. Koleva. "Processing diagram for powder bed additive manufacturing." Journal of Physics: Conference Series 2443, no. 1 (2023): 012002. http://dx.doi.org/10.1088/1742-6596/2443/1/012002.

Full text

Abstract:

Abstract This paper presents the developed software for processing parameter simulation and optimization of powder bed additive manufacturing by concentrated energy beams. The simulations are realized by implementation of a normalized processing diagram and analytical model simulating heating of powder layers by a moving linear heat source. Their implementation is demonstrated for electron beam or laser additive manufacturing of industrial alloys. The developed software and the processing diagram provide a useful reference and methodology to support the selection of appropriate processing para

APA, Harvard, Vancouver, ISO, and other styles

8

Havemo, Emelie. "Visual trends in the annual report: the case of Ericsson 1947-2016." Corporate Communications: An International Journal 23, no. 3 (2018): 312–25. http://dx.doi.org/10.1108/ccij-03-2017-0015.

Full text

Abstract:

PurposeDisclosure research has argued that visuals are increasingly used in annual reports as a way to increase readability of the annual report, but comparatively little is known about of diagrams compared to graphs and photographs. The purpose of this paper is to provide a historical account of visuals use in corporate disclosure, with an emphasis on diagrams, to show changes from the 1940s until present-day reporting.Design/methodology/approachVisual research methods were applied to analyze how diagrams, photographs and graphs were used in 69 annual reports of the Swedish telecom company Er

APA, Harvard, Vancouver, ISO, and other styles

9

Franco-Correa, Julio Cesar, Enrique Martínez-Franco, Celso Eduardo Cruz-González, Juan Manuel Salgado-López, and Jhon Alexander Villada-Villalobos. "Tailored Time–Temperature Transformation Diagram for IN718 Alloy Obtained via Powder Bed Fusion Additive Manufacturing: Phase Behavior and Precipitation Dynamic." Materials 16, no. 23 (2023): 7280. http://dx.doi.org/10.3390/ma16237280.

Full text

Abstract:

Experimental and computational approaches were used to study the microstructure of IN718 produced via powder bed fusion additive manufacturing (PBF-AM). The presence, chemical composition, and distribution of stable and metastable phases (γ′′, δ, MC, and Laves) were also analyzed. The information obtained from the microstructural study was used to construct a tailored time–temperature transformation (TTT) diagram customized for additive manufacturing of IN718. Experimental techniques, including differential scanning calorimetry (DSC), scanning electron microscopy, energy dispersive X-ray spect

APA, Harvard, Vancouver, ISO, and other styles

10

Qiao, Dong Ping, Xiao Juan Liu, and Hao Li. "Research on SysML-Based Modeling for Production Management System." Advanced Materials Research 753-755 (August 2013): 1868–74. http://dx.doi.org/10.4028/www.scientific.net/amr.753-755.1868.

Full text

Abstract:

A comprehensive and systematic model for the production process of large-scale equipment manufacturing can reduce the cost and time of the development and enforcement of the management system. The characters of a modeling language for systems engineering, SysML(Systems Modeling Language), are introduced, and through analyzing the complexity of the production management system for complex product, the basic requirements of its modeling are given; With the practical example in our project, SysML based model is built for production management system of complex product manufacturing ,the applicati

APA, Harvard, Vancouver, ISO, and other styles

11

Qiao, Hu, Xufan Wang, Zihao Wang, Liang Wang, and Ying Xiang. "Common Structure Mining of 3D Model Assembly Model Based on Frequent Subgraphs." Scientific Programming 2022 (July 19, 2022): 1–17. http://dx.doi.org/10.1155/2022/6829386.

Full text

Abstract:

As an important data source of complex product design and manufacturing, 3D assembly model has accumulated a large number of 3D assembly models in various manufacturing industries under the background of widely used digital design technology. In order to make better use of reusable common structure information about 3D assembly model, reduce repetitive labor, and shorten product development cycles, a common structure mining method of 3D assembly models was proposed. Firstly, based on the attribute neighbourhood diagram of individual parts of the 3D assembly model, the information of the assemb

APA, Harvard, Vancouver, ISO, and other styles

12

Bogorin-Predescu, Adrian, and Aurel Mihail Titu. "A specific approach about the process management in the automotive industry." Annals of the Academy of Romanian Scientists Series on Economy, Law and Sociology 8, no. 1 (2025): 42–48. https://doi.org/10.56082/annalsarscieco.2025.1.42.

Full text

Abstract:

This study highlights the effectiveness of structured process modelling tools, including the SIPOC diagram and detailed process maps, in the field of automotive electronic component manufacturing, including ECUs. The detailed process map provides an extensive depiction of the production cycle, elaborating on the high-level overview of SIPOC. The diagram clarifies the interaction among many process categories: key operational flows, management oversight, and essential support activities including logistics and quality assurance. It underscores the vital role of integrated systems like the Manuf

APA, Harvard, Vancouver, ISO, and other styles

13

Weber Marin, Andrea, Simone Creux, and Urs Meyer. "PROCESS-ORIENTED ANALYSIS." AUTEX Research Journal 3, no. 4 (2003): 219–24. http://dx.doi.org/10.1515/aut-2003-030408.

Full text

Abstract:

Abstract The consistency in logic between a stationary, process-oriented description of the system and its state-oriented counterpart is an important requirement imposed by automated manufacturing systems. In the late 1980s, computer-aided software engineering tools were developed to work with complex software systems. With these, the focus was on immaterial flows such as data and information. In searching for a method that could graphically describe complex systems, we developed our new methodology, Process- Oriented Analysis (POA). We have enriched the basic static diagram types of Structure

APA, Harvard, Vancouver, ISO, and other styles

14

TAKIZAWA, Ryuichi, and Syunji KITAZAWA. "Manufacturing Process Simulation Method by Using Block Diagram." TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C 79, no. 808 (2013): 5128–37. http://dx.doi.org/10.1299/kikaic.79.5128.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Yang, Li Na. "Research and Development of the Generation Method of Clothing Process Diagram Based on CAPP Integration System." Advanced Materials Research 503-504 (April 2012): 182–85. http://dx.doi.org/10.4028/www.scientific.net/amr.503-504.182.

Full text

Abstract:

Modern clothing products have diverse styles changing rapidly and complex processing techniques. They are greatly affected by artificial factor and the equipment conditions are differential. In consideration of these characteristics of the products,Based on the design of the clothing manufacturing craft, this thesis develops a generation method of clothing manufacturing process diagram based on interaction to search for the technical method of accelerating the automatic integrated system progress of the clothing manufacturing craft. Since clothing manufacturing process diagram is an important

APA, Harvard, Vancouver, ISO, and other styles

16

Stepanov, A. M., and N. V. Khashimova. "USE OF STATISTICAL QUALITY CONTROL METHODS IN MANUFACTURING BRIDGE METAL STRUCTURES." Kontrol'. Diagnostika, no. 253 (July 2019): 30–37. http://dx.doi.org/10.14489/td.2019.07.pp.030-037.

Full text

Abstract:

This article describes the use of statistical methods of quality control and management in the manufacturing metal bridge structures, such as: – cause and effect diagram (Ishikawa diagram). Causal factors affecting the quality of welded joints were established; – checklist. The form of the control sheet for registration of types of surface defects of butt welded joints were developed; – pareto Chart. The most common types of surface defects of butt welded joints were identified; the types of surface defects of butt welded joints, leading to the greatest losses were determined. ABC method – ana

APA, Harvard, Vancouver, ISO, and other styles

17

Kheifetz, Mikhail L. "Design of mechatronic engineering systems in digitalized traditional and additive manufacturing." Image Journal of Advanced Materials and Technologies 6, no. 1 (2021): 18–29. http://dx.doi.org/10.17277/jamt.2021.01.pp.018-029.

Full text

Abstract:

The paper presents the analysis of the steps and stages of designing process equipment for traditional manufacturing. The features of building process equipment using energy flows and consumables are studied. Structural synthesis of mechatronic systems in digitalized manufacturing make it possible to add new stages to the process of creating process equipment for both traditional automated subtractive and new additive manufacturing. The processes of manufacturing parts without forming equipment described by the algorithms according to the proposed structural diagram of connections provide an o

APA, Harvard, Vancouver, ISO, and other styles

18

He, Yingjin, Song Zheng, and Liguo Yuan. "Dynamics of Fractional-Order Digital Manufacturing Supply Chain System and Its Control and Synchronization." Fractal and Fractional 5, no. 3 (2021): 128. http://dx.doi.org/10.3390/fractalfract5030128.

Full text

Abstract:

Digital manufacturing is widely used in the production of automobiles and aircrafts, and plays a profound role in the whole supply chain. Due to the long memory property of demand, production, and stocks, a fractional-order digital manufacturing supply chain system can describe their dynamics more precisely. In addition, their control and synchronization may have potential applications in the management of real-word supply chain systems to control uncertainties that occur within it. In this paper, a fractional-order digital manufacturing supply chain system is proposed and solved by the Adomia

APA, Harvard, Vancouver, ISO, and other styles

19

Cho, Young-Jo, Sang-Rok Oh, Jung-Min Park, Ick Choy, Kwang-Bae Kim, and Joonhong Lim. "Function Block Diagram Approach for Manufacturing Process Control Programming." IFAC Proceedings Volumes 26, no. 2 (1993): 461–64. http://dx.doi.org/10.1016/s1474-6670(17)48510-7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

20

Firdaus, Dony Waluya, Lina Rosalina, and Hery Dwi Yulianto. "PERANCANGAN SISTEM INFORMASI AKUNTANSI DENGAN METODE DECISION SUPPORT SYSTEM (DSS)." is The Best Accounting Information Systems and Information Technology Business Enterprise this is link for OJS us 1, no. 1 (2012): 61–80. http://dx.doi.org/10.34010/aisthebest.v1i1.1800.

Full text

Abstract:

The research was conducted at PT. Sinkona Indonesia Lestari is a manufacturing company engaged in the industry that produces quinine salt of quinine and its derivatives. The Company requires cash flow of financial statements information that is fast, precise, accurate and up to date for management decision making. Authors are interested with the title "Accounting Information System Design Method With Decision Support System (DSS”). Design studies using primary data and secondary data, system development methodology using output oriented methodology, process oriented methodology and the d

APA, Harvard, Vancouver, ISO, and other styles

21

Wu, Yan, Shizhan Han, Xiaoshuai Chen, and Yongle Xie. "Study of optimization of blade non-uniform allowance process and chatter stability domain." Journal of Physics: Conference Series 2691, no. 1 (2024): 012024. http://dx.doi.org/10.1088/1742-6596/2691/1/012024.

Full text

Abstract:

Abstract In addressing the phenomenon of chatter during the machining of thin-walled components, a machining strategy involving the implementation of a continuous non-uniform toolpath has been proposed as a remedy for chatter suppression. The methodology commences with a meticulous determination of machining allowances, accomplished by utilizing fitting functions. Subsequently, the stiffness coefficients and natural frequencies inherent to the workpiece-tool system are extracted through modal analysis. A stability lobes diagram is formulated, employing the principles of regenerative chatter an

APA, Harvard, Vancouver, ISO, and other styles

22

Jou, Yung-Tsan, Riana Magdalena Silitonga, Ming-Chang Lin, Ronald Sukwadi, and Jovian Rivaldo. "Application of Six Sigma Methodology in an Automotive Manufacturing Company: A Case Study." Sustainability 14, no. 21 (2022): 14497. http://dx.doi.org/10.3390/su142114497.

Full text

Abstract:

Continuous improvement is the prime requirement for all industries to sustain and grow in the competitive global market. This paper is a case study of a manufacturing industry in Taiwan, facing the problem of rejection in the brushless motor product. The DMAIC (Define, Measure, Analyze, Improve, and Control) cycle was used to improve processes to reduce the rejection rate. In the Define phase, anything related to processes, products, suppliers, customers, and customer needs related to good quality products were determined. SIPOC diagrams (Supplier, Input, Process, Output, and Customer) and Cri

APA, Harvard, Vancouver, ISO, and other styles

23

Chyu, C. C. "Decomposable Probabilistic Influence Diagrams." Probability in the Engineering and Informational Sciences 5, no. 2 (1991): 229–43. http://dx.doi.org/10.1017/s0269964800002035.

Full text

Abstract:

Probabilistic influence diagrams are a useful stochastic modeling tool. To calculate probabilities of interest relative to a probabilistic influence diagram efficiently, it will be helpful for us to use an associated decomposable-directed graph. We first explore and discuss some graph-theoretic and conditional independence properties of decomposable probabilistic influence diagrams. These properties are helpful in providing an efficient algorithm for obtaining a posterior decomposable probabilistic influence diagram given the state of one or more observed nodes. The connection between Shachter

APA, Harvard, Vancouver, ISO, and other styles

24

Nadiya Yusriyyah and Camelia Rizki Agrina. "Analysis of Product Quality Control Using Statistical Process Control (SPC) at Didik Bag Convection in Bandung." MASMAN Master Manajemen 3, no. 1 (2025): 11–23. https://doi.org/10.59603/masman.v3i1.687.

Full text

Abstract:

Didik Bag Convection is a manufacturing business specializing in bag production. However, its production activities often encounter issues related to product quality, such as defects caused by employees' lack of understanding of new sewing machines, the absence of standard operating procedures (SOPs), and an unsupportive work environment. To address these issues, quality control measures are necessary, which can be analyzed using Statistical Process Control (SPC) to identify the root causes of defects in product quality and production processes. The quality control analysis techniques employed

APA, Harvard, Vancouver, ISO, and other styles

25

Kozakiewicz, Małgorzata, and Grzegorz Sawicki. "Risk elements in quality management for manufacturing enterprise." Mechanik 90, no. 7 (2017): 624–26. http://dx.doi.org/10.17814/mechanik.2017.7.93.

Full text

Abstract:

Discussed are chosen risk aspects in a quality management system. Presented is a model of production process. The Fishbone Diagram was developed. Possible approach to planning actions to address risks and opportunities indicated.

APA, Harvard, Vancouver, ISO, and other styles

26

Wang, Xuri, Yawen Zhang, Qihong Chang, et al. "Porous biochar nanosheets loaded with Fe3C particles accelerate electrochemical reactions and their applications in Li–S batteries." Sustainable Energy & Fuels 5, no. 17 (2021): 4346–54. http://dx.doi.org/10.1039/d1se00515d.

Full text

APA, Harvard, Vancouver, ISO, and other styles

27

Högström, Mats, Amirhosein Fadaei, Amin Rahimi, et al. "Proposal and Assessment of a Multiple Cycle-Continuous Cooling Transformation (MC-CCT) Diagram for Wire Arc Additive Manufacturing of Thin Walls." Metals 13, no. 9 (2023): 1533. http://dx.doi.org/10.3390/met13091533.

Full text

Abstract:

Continuous cooling transformation (CCT) diagrams of base metals are common in welding. They can be built using physical or numerical simulations, each with advantages and limitations. However, those are not usual for weld metal, considering its variable composition due to the dilution of the weld into the base metal. Wire Arc Additive Manufacturing (WAAM) is a distinctive case in which the interest in materials comparable with weld composition raises attention to estimating their mechanical properties. Notwithstanding, this concept is still not used in WAAM. Therefore, the aim of this work was

APA, Harvard, Vancouver, ISO, and other styles

28

Iqbal fadhilah and Suwanda. "Implementasi Diagram Kontrol Multivariate Cumulative Sum (MCUSUM) untuk Pengendalian Proses Pembuatan Turning Pin Aluminium." Bandung Conference Series: Statistics 3, no. 2 (2023): 755–62. http://dx.doi.org/10.29313/bcss.v3i2.9369.

Full text

Abstract:

Abstract. In statistics, one of the tools that can be used in process control is the control diagram. A control diagram is a graph that gives an idea of the behavior of a process. On the control diagram can detect any changes in the process that may affect the quality of the product. Product quality characteristics measured numerically or numerically are called variables. If there are more than two quality characteristics, simultaneous control of the related variables is required using a multivariate control diagram. The multivariate Shewhart control diagram (T2-Hotelling) is a frequently used

APA, Harvard, Vancouver, ISO, and other styles

29

Gerasimov, A. V., and Zh A. Mingaleva. "Features of the use of instrumental methods of problem analysis when implementing lean manufacturing." UPRAVLENIE / MANAGEMENT (Russia) 12, no. 3 (2024): 83–90. http://dx.doi.org/10.26425/2309-3633-2024-12-3-83-90.

Full text

Abstract:

Successful implementation of the lean manufacturing concept at an enterprise is impossible without the use of special management tools that allow timely identification of problems in the organisation’s activities and causes of their occurrence. However, the increase in uncertainty and unreliability of information creates significant obstacles in making both quick and accurate decisions. The need to select analytical tools to improve the reliability of management decisions requires careful choice of methods for making them. The article analyses the strengths and weaknesses of the Ishikawa cause

APA, Harvard, Vancouver, ISO, and other styles

30

Susanto, Ferri. "The Effect Of �The Venn Diagram� As A Cooperative Learning Strategy to Improve Reading Comprehension in Legal Description Texts During the Covid-19 Pandemic Period." Edu-Ling: Journal of English Education and Linguistics 5, no. 1 (2021): 80. http://dx.doi.org/10.32663/edu-ling.v5i1.2524.

Full text

Abstract:

The research was to find the simple effect of a graphic organizer which is one of the cooperative learning strategies by using Venn diagrams to improve reading comprehension of descriptive texts in English class for Law IAIN Bengkulu. The Venn Diagram has a positive effect on students. The research is Quays experimental with a non-equivalent control group design in English Specific Purpose for Law. The populations were second-semester students of the Faculty of Law. They are class A consisting of 16 students as an experimental class (international class) and class B consisting of 16 students (

APA, Harvard, Vancouver, ISO, and other styles

31

Dr. N. Venkateshwaran and Kashyap V V N. "A Study On 8d Methodology in Manufacturing Industry." International Journal of Management and Humanities 11, no. 6 (2025): 28–32. https://doi.org/10.35940/ijmh.j1722.11060225.

Full text

Abstract:

Paper This study delves into the measurement and optimization of the manufacturing process, through the implementation of the 8D Methodology in problem-solving. The paper discusses the fundamental aspects of the manufacturing industry and the specific products manufactured by the company. Utilizing secondary data from relevant journals, the research aims to identify potential production issues and enhance efficiency by applying the 8D Methodology. The study employs an experimental approach, analyzing 15,018 samples obtained from the final inspection of produced tubes. Attribute analysis using

APA, Harvard, Vancouver, ISO, and other styles

32

Yakushev, Alexey Vyacheslavovich, Alexander Vasilyevich Smolyaninov, and Konstantin Mikhaylovich Kolyasov. "Structural and phenomenological models of metals for car manufacturing." Transport of the Urals, no. 4 (2021): 18–23. http://dx.doi.org/10.20291/1815-9400-2021-4-18-23.

Full text

Abstract:

The paper provides examples of negative changes of mechanical properties of metals, including 20L cast steel, that are used in manufacturing of bearing elements of bogies for freight cars, which are manifested with growth of cyclic operating time. In order to study relationship of mechanical properties the authors have carried out a mathematical description of processes occurring at uniaxial quasi-static stretching in representative volume of fragile and viscous steel for car manufacturing with various cyclic operating time. Well known models of structural steel are supplemented by the Mironov

APA, Harvard, Vancouver, ISO, and other styles

33

Nadiyah, Khairun, and Grita Supriyanto Dewi. "Quality Control Analysis Using Flowchart, Check Sheet, P-Chart, Pareto Diagram and Fishbone Diagram." OPSI 15, no. 2 (2022): 183. http://dx.doi.org/10.31315/opsi.v15i2.7445.

Full text

Abstract:

SP Aluminum is engaged in the manufacturing industry by producing cooking utensils. In its application, SP Aluminum has tried to produce quality products to satisfy consumers. However, there are still defects that appear in its products. Another problem is the product defects have not been handled seriously by the company. Based on these problems, this study utilizes 5 quality control methods from seven tools: flowchart, check sheets, p-chart, Pareto diagram, and fishbone diagrams. This research is a quantitative qualitative with direct data collection through observation and interviews. The d

APA, Harvard, Vancouver, ISO, and other styles

34

Li, Li, and Zhao Yun Wu. "Research on Automatic Generation Technology of Structural Net and Speed Diagram." Advanced Materials Research 542-543 (June 2012): 1422–25. http://dx.doi.org/10.4028/www.scientific.net/amr.542-543.1422.

Full text

Abstract:

In view of the teaching problems and difficulties of machinery manufacturing equipment design, the automatic generation technology of structural net and speed diagram was proposed. The conceptions and characteristics of structural formula, structural net and speed diagram were discussed. The expected targets of the automatic generation technology were put forward. The technical principles of automatically generating structural net and speed diagram were respectively analyzed. Based on these, the automatic generation software of structural net and speed diagram was designed and developed. The d

APA, Harvard, Vancouver, ISO, and other styles

35

Dostrašil, Pavel. "Effective design and implementation of specific displacement diagrams to control kinetic sculptures." MATEC Web of Conferences 210 (2018): 04004. http://dx.doi.org/10.1051/matecconf/201821004004.

Full text

Abstract:

Electronic cams are used for different manufacturing systems, but in terms of displacement diagrams, they have common characteristics. The emphasis is usually placed on maximum accuracy, minimum machine cycle time and the displacement diagram has a simple shape. This paper addresses a completely different case, which shows that the use of electronic cams is very diverse. An Omron’s electronic cam was used to control kinetic art sculptures. It was necessary to develop an implementation that would be able to accommodate a large number of very long and complex displacement diagrams. Some sculptur

APA, Harvard, Vancouver, ISO, and other styles

36

Firman Ahmad Fauzi and Reni Amaranti. "Reduksi Pemborosan Menggunakan Pendekatan Lean Manufacturing pada Lantai Produksi Pembuatan Brake Hose." Bandung Conference Series: Industrial Engineering Science 4, no. 2 (2024): 1032–44. http://dx.doi.org/10.29313/bcsies.v4i2.15386.

Full text

Abstract:

Abstract. Waste that occurs on the production floor can hinder the production process and reduce company productivity. The purpose of this study was to identify and reduce waste that occurs on the production floor of brake hoses at PT Nichirin Indonesia. The study used a lean manufacturing approach with several tools such as Value Stream Mapping (VSM), SIPOC diagrams, Pareto charts, cause and effect diagrams, and Failure Mode and Effect Analysis (FMEA). The results showed that there are four types of waste that occur on the production floor, namely waiting time waste, inventory waste, transpor

APA, Harvard, Vancouver, ISO, and other styles

37

SAMCHUK, Ludmila, Yulia POVSTIANA, Nataliia LISHCHYNA, and Artem KLYMENKO. "USING UML DIAGRAMS FOR THE TECHNOLOGICAL PROCESS IN PRODUCTION." Herald of Khmelnytskyi National University. Technical sciences 319, no. 2 (2023): 268–75. http://dx.doi.org/10.31891/2307-5732-2023-319-1-268-275.

Full text

Abstract:

The article uses the unified UML modeling language to visualize production elements. To show some of the advantages of the proposed approach, the main components of the production system are defined: technological machines, operators, materials, products and the production process. A class diagram is used to represent the components. Defined attributes and methods of each class: attributes and methods to each class that define its properties and behavior. The Machine class can have attributes such as machine ID and Destination, and methods such as start() and stop(). Relationships between clas

APA, Harvard, Vancouver, ISO, and other styles

38

Kashyap, V. V. N. "A Study On 8d Methodology in Manufacturing Industry." International Journal of Management and Humanities (IJMH) 11, no. 6 (2025): 28–32. https://doi.org/10.35940/ijmh.J1722.11060225.

Full text

Abstract:

<strong>Abstract:</strong> Paper This study delves into the measurement and optimization of the manufacturing process, through the implementation of the 8D Methodology in problem-solving. The paper discusses the fundamental aspects of the manufacturing industry and the specific products manufactured by the company. Utilizing secondary data from relevant journals, the research aims to identify potential production issues and enhance efficiency by applying the 8D Methodology. The study employs an experimental approach, analyzing 15,018 samples obtained from the final inspection of produced tubes

APA, Harvard, Vancouver, ISO, and other styles

39

GAO, Bai, and Lan ZHU. "The Industrial Internet of Things: A Competitive Advantage in the Era of Smart Manufacturing." 政治经济学季刊 2, no. 1 (2023): 135–55. http://dx.doi.org/10.26599/peo.2023.9310107.

Full text

Abstract:

At present, the Chinese manufacturing industry's competitive advantage is facing multiple challenges. China's “hexagon diagram” industrial policy, which has promoted the competitive advantage of Chinese companies in the era of globalization, encompasses these six strategies: enhancing factor supply, building infrastructure, improving institutional environments, enlarging market size, promoting industrial clustering, and encouraging competition. The hexagon model of industrial policy has gained China entry into many industries and increased their competitive advantage by lowering production cos

APA, Harvard, Vancouver, ISO, and other styles

40

Cherepanov, A. I., V. V. Kukartsev, A. V. Kuznetsov, E. G. Kravcova, S. G. Dokshanin, and O. S. Stephanenko. "Design of an induction brazing installation for connecting oil and gas equipment." Journal of Physics: Conference Series 2094, no. 4 (2021): 042010. http://dx.doi.org/10.1088/1742-6596/2094/4/042010.

Full text

Abstract:

Abstract The article is devoted to the design of a circuit diagram of an induction heating device. The work carried out a literature review in the area under consideration. The technology of manufacturing a union is considered, which consists of manufacturing a plug, a branch pipe and a flange. Conducted research and application of induction brazing and various fields. Various elements of the equipment used in the design process are considered. A schematic flow diagram of the induction brazing unit has been developed. As a result of the work, the design of the installation for induction solder

APA, Harvard, Vancouver, ISO, and other styles

41

Mazur, Alexander V., Michael M. Gasik, and Vladislav I. Mazur. "Study of Ti–Si in situ composite processing by multi-stage eutectic solidification." International Journal of Materials Research 95, no. 5 (2004): 377–80. http://dx.doi.org/10.1515/ijmr-2004-0079.

Full text

Abstract:

Abstract A titanium composite alloy (Ti –Al –Si – Zr) manufacturing process using eutectic solidification was studied by simultaneous thermal analysis up to 1480 °C. Phase transformations predicted by sections of the phase stability diagram (ThermoCalc optimisation) have been observed. The structure of the alloy was also studied by scanning electron microscopy (SEM), light optical microscopy (LOM) and X-ray microanalysis. Several patterns, unexplained on the basis of the stable phase diagrams of the system, are revealed to be associated with metastable phase transformations. The results can be

APA, Harvard, Vancouver, ISO, and other styles

42

PAPADOPOULOU, EVANTHA, and D. T. LEE. "THE L∞ VORONOI DIAGRAM OF SEGMENTS AND VLSI APPLICATIONS." International Journal of Computational Geometry & Applications 11, no. 05 (2001): 503–28. http://dx.doi.org/10.1142/s0218195901000626.

Full text

Abstract:

In this paper we address the L∞ Voronoi diagram of polygonal objects and present application in VLSI layout and manufacturing. We show that L∞ Voronoi diagram of polygonal objects consists of straight line segments and thus it is much simpler to compute than its Euclidean counterpart; the degree of the computation is significantly lower. Moreover, it has a natural interpretation. In applications where Euclidean precision is not essential the L∞ Voronoi diagram can provide a better alternative. Using the L∞ Voronoi diagram of polygons we address the problem of calculating the critical area for

APA, Harvard, Vancouver, ISO, and other styles

43

Priimak, E. V. "Practical Aspects of “Lean Manufacturing” Methodology." Vestnik IzhGTU imeni M.T. Kalashnikova 28, no. 1 (2025): 33–45. https://doi.org/10.22213/2413-1172-2025-1-33-45.

Full text

Abstract:

The study was conducted in order to optimize the production processes of NPF GENIX LLC, the leader of detergent and disinfectant production in the Republic of Mari El, by means of lean manufacturing basic tools. The main idea of lean manufacturing is to create a flow of values by exclusion from the production process components with zero contribution to the product manufacture. This approach allows discovering ways to reduce labor costs, new product developing time, product creating time, production and warehouse space reduction, and also guaranteeing the customer maximum quality at minimum co

APA, Harvard, Vancouver, ISO, and other styles

44

Li, Qin, Guang Chun Yang, and Xin De Chen. "Study on Facility Layout of a Manufacturing Shop Based on SLP Method." Applied Mechanics and Materials 220-223 (November 2012): 127–31. http://dx.doi.org/10.4028/www.scientific.net/amm.220-223.127.

Full text

Abstract:

Aimed at the production technological process, analysis has been carried out on the current situation of workshop layout, and find out the existed problems; Systematic Layout Planning (SLP) method is exerted to analyze the workshop concerning relationship between logistics and non-logistics, draw out correlation diagram of location of working unit and correlation diagram of area of working unit. Two optimum proposals are determined according to the realistic of workshop, and weighting factor method is adopted for evaluation, thus obtain the optimal layout proposal. So that aims are achieved fo

APA, Harvard, Vancouver, ISO, and other styles

45

Medne, Olita, Ilo Dreijers, and Līga Bērziņa. "ANALYSES OF THE CAUSE AND EFFECT DIAGRAMMS OF EXPANDED POLYSTYRENE MANUFACTURING PROCESS." Environment. Technology. Resources. Proceedings of the International Scientific and Practical Conference 1 (August 3, 2015): 50. http://dx.doi.org/10.17770/etr2009vol1.1108.

Full text

Abstract:

The manufacturing of expanded polystyrene is a multi-stage process. In each stage the number of technologic parameters is very high, they are intercorrelated and influence the quality of the end product. The improper combination of parameter quantitative values causes defects – deterioration of mechanical and heat insulation properties, product deformation and cracking. The planning of experiments for parameter discrimination and afterwards optimization is not practicable due to the high number of variables. That is why we used the cause and effect diagrams for the identification of the most e

APA, Harvard, Vancouver, ISO, and other styles

46

Mashud, Andi Mattigara, and Ramlah P. "Perancangan Sistem Informasi Koperasi pada KSP. Bakti Huria." TEMATIK 8, no. 1 (2021): 69–83. http://dx.doi.org/10.38204/tematik.v8i1.568.

Full text

Abstract:

Penelitian ini bertujuan untuk membuat sistem informasi koperasi pada KSP. BAKTI HURIA. Penelitian ini bersifat analisis deskriptif kualitatif yaitu penelitian yang meliputi analisis sistem dan dilanjutkan dengan perancangan sistem informasi. Perancangan sistem informasi dibuat dengan menggunakan UML yang meliputi Use Case Diagram, Activity Diagram, Class Diagram dan Sequence Diagram. Prosedur simpan pinjam pada koperasi KSP. BAKTI HURIA ditemukan beberapa kelemahan diantaranya adalah dokumen pencatatan transaksi simpanan maupun pinjaman, serta laporan yang dihasilkan. Penelitian ini dilakukan

APA, Harvard, Vancouver, ISO, and other styles

47

Ahmad Saifullah Mawardi, Lina Marlina, and Qiny Shonia Az Zahra. "TABDZIR (WASTE) REDUCTION USING LEAN MANUFACTURING APPROACH IN FADHILA AQIQAH TASIKMALAYA PRODUCTION PROCESS." Jurnal Ekonomi Syariah, Akuntansi dan Perbankan (JESKaPe) 6, no. 2 (2022): 286–302. http://dx.doi.org/10.52490/jeskape.v6i2.932.

Full text

Abstract:

Delay delivery on Fadhila Aqiqah distribution process occurred frequently. The problem was there’re waste in their production process. In islam, it called tabdzir. Tabdzir can minimized so the production process being more efficient. The purpose of this research is to find out how to minimize waste by analyzing the lean manufacturing approach. The research method used is a qualitative approach, namely lean manufacturing with tools in the form of value stream mapping and fishbone diagrams. Value Stream Mapping (VSM) to describe the flow of the production process from raw materials to finished p

APA, Harvard, Vancouver, ISO, and other styles

48

TAKIZAWA, Ryuichi, and Syunji KITAZAWA. "3308 Development of a Manufacturing Process Simulation By Using Block Diagram." Proceedings of Design & Systems Conference 2011.21 (2011): 601–5. http://dx.doi.org/10.1299/jsmedsd.2011.21.601.

Full text

APA, Harvard, Vancouver, ISO, and other styles

49

RADHAKRISHNAN, V. "Endurance diagram." International Journal of Fatigue 12, no. 6 (1990): 513–17. http://dx.doi.org/10.1016/0142-1123(90)90224-3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

Angga Kurniawan, Moch Malgi Alpariz Kadarisman, Eki Yudhistira, and Muchammad Fauzi. "Analisis Penyebab Cacat Pada Kemasan Di Perusahaan Farmasi." JURAL RISET RUMPUN ILMU TEKNIK 3, no. 1 (2023): 01–09. http://dx.doi.org/10.55606/jurritek.v3i1.2232.

Full text

Abstract:

With the increasing era of globalization today, competition in the industrial sector is becoming increasingly fierce and competitive. With the development of modern technology for the better but on the other hand raises problems for the environment. Every business actor who wants to win the competition must pay full attention to the quality of the products or services produced, at a low cost, the right time and quantity, and safe conditions. This study aims to analyze and reduce waste of packaging waste at PT XYZ, a manufacturing company engaged in the manufacture of medicines and vaccines. In

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!