Log in

Relevant bibliographies by topics / Manufacturing specifications

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Manufacturing specifications'

Author: Grafiati

Published: 8 September 2021

Last updated: 18 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Manufacturing specifications.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Manufacturing specifications"

1

Tsai, Jhy-Cherng, and Mark R. Cutkosky. "Representation and reasoning of geometric tolerances in design." Artificial Intelligence for Engineering Design, Analysis and Manufacturing 11, no. 4 (1997): 325–41. http://dx.doi.org/10.1017/s0890060400003255.

Full text

Abstract:

AbstractThe geometric dimensioning and tolerancing (GD&T) specifications of a design are directly associated with its performance and functional requirements. They also govern the manufacturing and quality control processes needed to achieve those requirements. This paper reviews recent work in geometric tolerance representation and reasoning and presents a generic and uniform graph-based representation scheme, called the Tolerance Network, to represent GD&T specifications across a part or assembly. The network can accommodate GD&T specifications related to the function, behavior,

APA, Harvard, Vancouver, ISO, and other styles

2

Rodrik, Dani. "Unconditional Convergence in Manufacturing *." Quarterly Journal of Economics 128, no. 1 (2012): 165–204. http://dx.doi.org/10.1093/qje/qjs047.

Full text

Abstract:

Abstract Unlike economies as a whole, manufacturing industries exhibit strong unconditional convergence in labor productivity. The article documents this at various levels of disaggregation for a large sample covering more than 100 countries over recent decades. The result is highly robust to changes in the sample and specification. The coefficient of unconditional convergence is estimated quite precisely and is large, at between 2–3% in most specifications and 2.9% a year in the baseline specification covering 118 countries. The article also finds substantial sigma convergence at the two-digi

APA, Harvard, Vancouver, ISO, and other styles

3

Kazmer, David, David Hatch, Liang Zhu, Christoph Roser, and Deepak Kapoor. "Definition and Application of a Process Flexibility Index." Journal of Manufacturing Science and Engineering 125, no. 1 (2003): 164–71. http://dx.doi.org/10.1115/1.1536174.

Full text

Abstract:

A performance index, Cf, is developed for assessing the flexibility of candidate engineering designs and manufacturing processes at various stages during product development. The index is a ratio of the range of the feasible space to the range of the specification or measured process variation. The process flexibility index complements the process capability index, Cp, to provide a simple and quantitative basis for practicing the principles of axiomatic design. This quantitative measure can be used to support rational product development and manufacturing investment decisions, and clearly illu

APA, Harvard, Vancouver, ISO, and other styles

4

Osanna, P. H., A. Afjehi-Sadat, and M. N. Durakbasa. "Geometrical Product Specifications for Intelligent Manufacturing Systems." IFAC Proceedings Volumes 34, no. 17 (2001): 135–39. http://dx.doi.org/10.1016/s1474-6670(17)33269-x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Schmidt, Klaus Werner. "Reconfigurability of behavioural specifications for manufacturing systems." International Journal of Control 90, no. 12 (2016): 2605–17. http://dx.doi.org/10.1080/00207179.2016.1261185.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Lin, S. J., D. L. Yang, F. T. Cheng, and M. F. Wu. "Aircraft Turbine Engine Manufacturing with Multiple Specifications." Journal of Testing and Evaluation 41, no. 1 (2012): 20120022. http://dx.doi.org/10.1520/jte20120022.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Dandekar, Abhay, Ibrahim Zeid, and Theodore Bardasz. "User interface for specification language for case-based mechanical design." Artificial Intelligence for Engineering Design, Analysis and Manufacturing 11, no. 1 (1997): 17–31. http://dx.doi.org/10.1017/s0890060400001815.

Full text

Abstract:

AbstractCase-based design (CBD) systems aim to solve a design problem by tailoring previously solved design problems to the current problem. Designers' specifications are used for indexing the knowledge base of the CBD system to retrieve an appropriate design case. Menu-based systems fail to capture designers' specifications effectively due to lack of expressiveness, while natural language systems are too immature to satisfy the goal. This paper presents the development of a graphical user interface (GUI) to implement a mechanical design specification language (MDSL) (Stelling, 1994) used to f

APA, Harvard, Vancouver, ISO, and other styles

8

Писаренко, Ирина, Irina Pisarenko, Александр Ермаков, and Aleksandr Ermakov. "Developing Production-Machine Software Specifications." Services in Russia and abroad 8, no. 1 (2014): 104–12. http://dx.doi.org/10.12737/2554.

Full text

Abstract:

The article dwells on the garment-making-machine control, diagnostics and service software requirements as imposed by the peculiarities of the garment manufacturing technological processes. The authors consider the stages of software development and software quality indicators.

APA, Harvard, Vancouver, ISO, and other styles

9

CHATTERJEE, MOUTUSHI, and ASHIS KUMAR CHAKRABORTY. "UNIVARIATE PROCESS CAPABILITY INDICES FOR UNILATERAL SPECIFICATION REGION — A REVIEW AND SOME MODIFICATIONS." International Journal of Reliability, Quality and Safety Engineering 19, no. 04 (2012): 1250020. http://dx.doi.org/10.1142/s0218539312500209.

Full text

Abstract:

In a manufacturing industry, often the quality characteristic under study is found to have only one of the two specification limits viz., upper specification limit (USL) or lower specification limit (LSL). In such cases the process capability indices (PCI) designed for bilateral specifications become inappropriate. However, in the literature only a few indices are available to address this problem. In the present paper, we have made an extensive study of the PCI's for unilateral specifications with a brief discussion of their possible fields of applications and drawbacks, if any. We have also

APA, Harvard, Vancouver, ISO, and other styles

10

Uehara, Minoru. "Metabolic Computing." International Journal of Distributed Systems and Technologies 3, no. 3 (2012): 27–39. http://dx.doi.org/10.4018/jdst.2012070103.

Full text

Abstract:

In this paper, the author proposes a metabolic computing model for a truly renewable system with high fault tolerance and sustainability and a realistic architecture for the model using four kinds of elements: metaboloids, slots, a power queue, and recycle unit. Metaboloids, which are processing units, are arranged in a mesh in the power queue. However, as the metabolism may change the network, to manage running tasks, metaboloids must achieve homeostasis, for which two new algorithms, bubbling and drifting, are presented. For simple metabolism, the specification of the architecture does not c

APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Manufacturing specifications"

1

Sargeant, Roland B. (Roland Basil) 1974. "Functional specifications of a manufacturing execution system." Thesis, Massachusetts Institute of Technology, 2003. http://hdl.handle.net/1721.1/84352.

Full text

Abstract:

Thesis (M.B.A.)--Massachusetts Institute of Technology, Sloan School of Management; and, (S.M.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science; in conjunction with the Leaders for Manufacturing Program at MIT, 2003.<br>Includes bibliographical references (p. 129-130).<br>by Roland B. Sargeant.<br>S.M.<br>M.B.A.

APA, Harvard, Vancouver, ISO, and other styles

2

Lu, Wenlong. "Modelling the integration between the design and inspection process of geometrical specifications for digital manufacturing." Thesis, University of Huddersfield, 2011. http://eprints.hud.ac.uk/id/eprint/14054/.

Full text

Abstract:

Geometrical Product Specifications (GPS) is a technical language which covers the standardization for micro/macro- geometry specifications. In today’s environment of globalization, out-sourcing and sub-contracting is increasing. Geometrical specifications of a product need to be detailed to a degree where nothing is left open to interpretation. To fulfil this, and to meet the requirements of digital manufacturing, it is necessary to integrate the design and inspection process of a geometrical specification. At the technical level, many functional operator/operations are employed in a geometric

APA, Harvard, Vancouver, ISO, and other styles

3

Andrews, Peter T. J. "Design reuse in a CAD environment." Thesis, Brunel University, 1999. http://bura.brunel.ac.uk/handle/2438/5086.

Full text

Abstract:

For many companies, design related information mainly exists as rooms of paper-based archives, typically in the form of manufacturing drawings and technical specifications. This 'static' information cannot be easily reused. The work presented in this thesis proposes a methodology to ease this problem. It defines and implements a computer-based design tool that will enable existing design families to be transformed into 'dynamic' CAD-based models for the Conceptual, Embodiment and Detailed stages of the design process. Two novel concepts are proposed here, i) the use of a Function Means Tree to

APA, Harvard, Vancouver, ISO, and other styles

4

Jaballi, Karim. "Contribution à la génération assistée par ordinateur du tolérancement de fabrication 3D." Phd thesis, Ecole Centrale Paris, 2009. http://tel.archives-ouvertes.fr/tel-00704516.

Full text

Abstract:

Lors de la réalisation des pièces d'un mécanisme, le fabricant se doit de respecter les exigences géométriques exigées par le client. Ces exigences sont issues de besoins fonctionnels du mécanisme à tous les stades de son cycle de vie. Le fabricant lors des opérations successives d'usinage, avec ou sans enlèvement de matière, doit définir les exigences de la géométrie ajoutée au poste. La combinaison de ces exigences affectées de leur tolérance doit être comparée aux exigences géométriques du client. L'objectif du travail présenté est la définition d'une méthode optimisant, rationnellement, le

APA, Harvard, Vancouver, ISO, and other styles

5

Salles, Andre S. "The specification and evaluation of personalised footwear for additive manufacturing." Thesis, Loughborough University, 2011. https://dspace.lboro.ac.uk/2134/9240.

Full text

Abstract:

The personalisation of footwear offers advantages not only for runners, but to anyone who wishes to become more active. Additive manufacturing (AM) technology has the potential for making footwear personalisation economically feasible by allowing direct manufacture from CAD models and its tool-less capability. This thesis aims to develop and explore the process of footwear personalisation using AM and evaluates such footwear in terms of discomfort and biomechanics. To start to explore this process a repeated measures pilot study was conducted. Six recreational runners had anthropometric measur

APA, Harvard, Vancouver, ISO, and other styles

6

Wang, Yue. "Probabilistic specification definition and recommendation for product customization /." View abstract or full-text, 2009. http://library.ust.hk/cgi/db/thesis.pl?IELM%202009%20WANG.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Mueller, Ralph. "Specification and Automatic Generation of Simulation Models with Applications in Semiconductor Manufacturing." Diss., Georgia Institute of Technology, 2007. http://hdl.handle.net/1853/16147.

Full text

Abstract:

The creation of large-scale simulation models is a difficult and time-consuming task. Yet simulation is one of the techniques most frequently used by practitioners in Operations Research and Industrial Engineering, as it is less limited by modeling assumptions than many analytical methods. The effective generation of simulation models is an important challenge. Due to the rapid increase in computing power, it is possible to simulate significantly larger systems than in the past. However, the verification and validation of these large-scale simulations is typically a very challenging task. This

APA, Harvard, Vancouver, ISO, and other styles

8

Wu, Quansheng. "Contribution à l'intégration de communications multimédias dans un environnement MMS (Manufacturing Message Specification)." Nancy 1, 1997. http://www.theses.fr/1997NAN10166.

Full text

Abstract:

Cette thèse porte sur l'intégration de communications multimédias dans les systèmes de production automatisés. Les informations multimédias se caractérisent par les besoins très variés en terme de Qualité de Service, notamment sur le système de communication. L'intégration de ces nouveaux types d'informations doit se faire de façon cohérente en regard des systèmes de communication normalisés en productique. Les réseaux locaux industriels implémentent en particulier la messagerie industrielle MMS (Manufacturing Message Specification) qui virtualise les principaux dispositifs de production manuf

APA, Harvard, Vancouver, ISO, and other styles

9

Akkineni, Vamsi Krishna. "Specification of a Generic Programming Language for the Control of Flexible Manufacturing Cells." Master's thesis, Virginia Tech, 1999. http://hdl.handle.net/10919/37155.

Full text

Abstract:

The Flexible Manufacturing Cell (FMC) represents an important and widely utilized constituent of hierarchically structured automated manufacturing systems. The control of FMCs is therefore of great importance in automated manufacturing. However, there are few tools and methodologies available for specifying and developing the control logic. The few tools that do exist have proven to be impractical due to their equirements for compatibility by the constituent equipment. Therefore, this research focuses on the development of a solution to the control of FMCs through the development of a progra

APA, Harvard, Vancouver, ISO, and other styles

10

Sinclair, Matthew. "The specification of a consumer design toolkit to support personalised production via additive manufacturing." Thesis, Loughborough University, 2012. https://dspace.lboro.ac.uk/2134/11051.

Full text

Abstract:

This thesis stems from the future scenario that as additive manufacturing (AM) technologies become cheaper and more readily available, consumers without formal design training will begin to customise, design and manufacture their own products. Much of this activity is likely to infringe on brands' intellectual property. The research explores the feasibility of a situation in which, rather than attempting to prohibit such activity, manufacturers engage with consumers to facilitate it, thus retaining control (albeit reduced) over their brand's image and the quality of products offered. The resea

APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Manufacturing specifications"

1

Meier, Hans W. Construction specifications: Principles and applications. Thomson Delmar Learning, 2008.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Taylor, Peter C. Specifications and protocols for acceptance tests on processing additions in cement manufacturing. Transportation Research Board, 2008.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Association, Japan Industrial Robot. The specifications and applications of industrial robots in Japan: Manufacturing fields, 1994. Japan Industrial Robot Association, 1999.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

Center for Strategic and International Studies (Washington, D.C.). Working Group on Military Specifications and Standards. Road map for milspec reform: Integrating commercial and military manufacturing. Center for Strategic & International Studies, 1993.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

Debra, Van Opstal, and Saunders Gregory E, eds. Road map for milspec reform: Integrating commercial and military manufacturing : the report of the Working Group on Military Specifications and Standards. Center for Strategic & International Studies, 1993.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

(Firm), Knovel, ed. Geometrical dimensioning and tolerancing for design, manufacturing and inspection: A handbook for geometrical product specifications using ISO and ASME standards. 2nd ed. Butterworth-Heinemann, 2006.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

Standardization, International Organization for. Industrial automation systems - manufacturing message specification. ISO/IEC, 1992.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

Standardization, International Organization for. Industrial automation systems: Manufacturing message specification. ISO/IEC, 1991.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

Kokkinaki, A. I. Error specification, monitoring and recovery in computer integrated manufacturing: An analyticalapproach. SERCentre, De Montfort University, 1996.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

Basu, Susanto. Are apparent productive spillovers a figment of specification error? National Bureau of Economic Research, 1995.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Manufacturing specifications"

1

Halevi, Gideon. "Product Specifications and Design." In All-Embracing Manufacturing. Springer Netherlands, 2012. http://dx.doi.org/10.1007/978-94-007-4180-5_5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Dantan, Jean-Yves, François Thiebaut, Alex Ballu, and Pierre Bourdet. "Functional and Manufacturing Specifications." In Integrated Design and Manufacturing in Mechanical Engineering. Springer Netherlands, 2002. http://dx.doi.org/10.1007/978-94-015-9966-5_7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Dantan, Jean-Yves, François Thiebaut, Alex Ballu, and Pierre Bourdet. "Functional and Manufacturing Specifications." In Integrated Design and Manufacturing in Mechanical Engineering. Springer Netherlands, 2002. http://dx.doi.org/10.1007/978-94-015-9966-5_8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Burdick, Richard K., David J. LeBlond, Lori B. Pfahler, et al. "Specifications." In Statistical Applications for Chemistry, Manufacturing and Controls (CMC) in the Pharmaceutical Industry. Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-50186-4_7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Holloway, Lawrence E. "Model-Based Operational Specifications for Fault Monitoring in Manufacturing Systems." In Intelligent Manufacturing:. Springer London, 1993. http://dx.doi.org/10.1007/978-1-4471-2023-0_7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Shina, Sammy G. "Product Specifications and Manufacturing Process Tolerances." In Concurrent Engineering and Design for Manufacture of Electronics Products. Springer US, 1991. http://dx.doi.org/10.1007/978-1-4684-6518-1_4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Psarommatis, Foivos, and Dimitris Kiritsis. "Identification of the Inspection Specifications for Achieving Zero Defect Manufacturing." In IFIP Advances in Information and Communication Technology. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-30000-5_34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Casalino, G., and V. De Totero. "Influence of the Measuring Process on the Verification of Gear Geometrical Specifications." In AMST’05 Advanced Manufacturing Systems and Technology. Springer Vienna, 2005. http://dx.doi.org/10.1007/3-211-38053-1_72.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Sieber, John R. "Quantitative XRF Determinations of Additive Elements in Greases for Manufacturing Specifications." In Advances in X-Ray Analysis. Springer US, 1993. http://dx.doi.org/10.1007/978-1-4615-2972-9_19.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Lesage, D., J.-C. Léon, P. Sebah, and A. Rivière. "A Proposal of Structure for a Variational Modeler Based on Functional Specifications." In Recent Advances in Integrated Design and Manufacturing in Mechanical Engineering. Springer Netherlands, 2003. http://dx.doi.org/10.1007/978-94-017-0161-7_8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Manufacturing specifications"

1

Dow, Blaine, Charley Kamps, Justin Cremer, John Conn, and Adel Mettai. "API Specification 16 RCD Demystifying Rotating Control Device Manufacturing Specifications for Operations." In SPE/IADC Drilling Conference and Exhibition. Society of Petroleum Engineers, 2017. http://dx.doi.org/10.2118/184721-ms.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Ott, R. E., B. D. Craig, and Richard Beeson. "Improved Specifications for Manufacturing and Inspection of Sucker Rods." In SPE Annual Technical Conference and Exhibition. Society of Petroleum Engineers, 1992. http://dx.doi.org/10.2118/24837-ms.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Azangoo, Mohammad, Amir Taherkordi, and Jan Olaf Blech. "Digital Twins for Manufacturing Using UML and Behavioral Specifications." In 2020 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). IEEE, 2020. http://dx.doi.org/10.1109/etfa46521.2020.9212165.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Gerchrnan, Mark C. "Specifications And Manufacturing Considerations Of Diamond Machined Optical Components." In O-E/LASE'86 Symp (January 1986, Los Angeles), edited by Robert E. Fischer and Warren J. Smith. SPIE, 1986. http://dx.doi.org/10.1117/12.956360.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Provan, Gregory, Yousri El Fattah, and Adnan Darwiche. "Using Database Specifications to Automate the Diagnosis of Factory Automation Systems." In International Automotive Manufacturing Conference & Exposition. SAE International, 1998. http://dx.doi.org/10.4271/981337.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Rahman, Muhamad Arfauz A., and John P. T. Mo. "Design Methodology for Manufacturing Automation System Reconfiguration." In ASME 2010 International Mechanical Engineering Congress and Exposition. ASMEDC, 2010. http://dx.doi.org/10.1115/imece2010-38345.

Full text

Abstract:

The fluctuating customer demand especially in product requirements and system specifications these days requires system design engineers to configure and reconfigure the manufacturing system regularly. This paper elaborates a configuration study of a manufacturing system as well as illustrating basic design methodology of capturing user requirements and specifications for flexible reconfiguration in manufacturing automation system. The configuration study was conducted to accumulate various design outcomes from a given manufacturing process. The manufacturing process chosen for the study descr

APA, Harvard, Vancouver, ISO, and other styles

7

Lee, David E., and H. Thomas Hahn. "A Temporal Process Specification Language for Virtual Manufacturing Engineering." In ASME 1998 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1998. http://dx.doi.org/10.1115/detc98/cie-5535.

Full text

Abstract:

Abstract A process specification language is being developed for virtual manufacturing that provides a structured portable definition of a given manufacturing process as well as the ability to specify the temporal relationships between individual operation steps that compose a process. Based on the concepts embodied in markup languages such as HTML, SGML and XML, a portable process definition structure is defined. This structure provides a template from which virtual process specifications can be created. Subsequently, these structures can be exchanged between development environments for virt

APA, Harvard, Vancouver, ISO, and other styles

8

Laskowski, Christina, Todd Snelson, and Saadia Safir. "Sustain-A-Bear™: Applying Manufacturing Sustainability Practices to Plush Stuffed Animals." In ASME 2009 International Manufacturing Science and Engineering Conference. ASMEDC, 2009. http://dx.doi.org/10.1115/msec2009-84224.

Full text

Abstract:

The stuffed toy market is quite large, with some manufacturers earning nearly half a billion dollars in revenue per year. However, the vast majority of manufacturers do not currently employ sustainable manufacturing techniques. This paper documents the development of a cost-effective stuffed product by placing an emphasis on sustainability within the design process while maintaining the user appeal of a traditional teddy bear. Specifications were determined by analyzing each of the four stages of the product timeline (extraction, manufacture, use, and disposal) to ensure that sustainability wa

APA, Harvard, Vancouver, ISO, and other styles

9

Johnson, W. Todd, and Fred Abbott. "The Relationship Of Optical Component Specifications To Optical Component Manufacturing Processes." In 1988 Los Angeles Symposium--O-E/LASE '88, edited by Robert E. Fischer and Donald C. O'Shea. SPIE, 1988. http://dx.doi.org/10.1117/12.944340.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Bastedo, Richard S., and Duane C. Oberg. "U.S. Military and Federal Government Cancellation of Part, Material, and Process Standards and Specifications." In SAE Aerospace Manufacturing Technology Conference & Exposition. SAE International, 1997. http://dx.doi.org/10.4271/972202.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Manufacturing specifications"

1

Kemmerer, Sharon J., and James E. Fowler. Initial Manufacturing Exchange Specification (IMES):. National Institute of Standards and Technology, 1997. http://dx.doi.org/10.6028/nist.ir.5978.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Lee, Y. Tina. Initial Manufacturing Exchange Specification (IMES):. National Institute of Standards and Technology, 1999. http://dx.doi.org/10.6028/nist.ir.6307.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Lee, Y. Tina. Initial manufacturing Exchange Specification (IMES):. National Institute of Standards and Technology, 1998. http://dx.doi.org/10.6028/nist.ir.6139.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Flater, David. Specification of interactions in integrated manufacturing systems. National Institute of Standards and Technology, 2000. http://dx.doi.org/10.6028/nist.ir.6484.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Hedberg Jr., Thomas, Moneer Helu, and Marcus Newrock. Software requirements specification to distribute manufacturing data. National Institute of Standards and Technology, 2017. http://dx.doi.org/10.6028/nist.ams.300-2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Beverinotti, Javier, Gustavo Canavire-Bacarreza, María Cecilia Deza, and Lyliana Gayoso de Ervin. The Effects of Management Practices on Effective Tax Rates: Evidence from Ecuador. Inter-American Development Bank, 2021. http://dx.doi.org/10.18235/0003505.

Full text

Abstract:

This paper examines the effects of management practices on effective tax rates (ETR) in a sample of medium and large manufacturing firms in Ecuador. We use a novel data set on management practice scores matched with administrative tax data from the Superintendence of Companies and the Internal Revenue Services of Ecuador based on firms' tax filings. We find that better management practices are positively associated with effective tax rates, defined as the share of tax obligations to profits. This result is robust under various specifications controlling for different covariates, and to differe

APA, Harvard, Vancouver, ISO, and other styles

7

Fowler, James E. A generic architecture for Computer Integrated Manufacturing software based on the Product Data Exchange Specification. National Institute of Standards and Technology, 1989. http://dx.doi.org/10.6028/nist.ir.89-4168.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!