Relevant bibliographies by topics / Manufacturing testing

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Manufacturing testing'

Author: Grafiati
Published: 4 June 2021
Last updated: 18 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Manufacturing testing.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Manufacturing testing"

1

Basale, Kanchan, Pooja Jagtap, Yogita Midgule, and Manjiri Hulpale. "Review Paper on “Manufacturing and Testing of Plastic Tiles”." Journal of Advances and Scholarly Researches in Allied Education 15, no. 2 (April 1, 2018): 683–85. http://dx.doi.org/10.29070/15/56952.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Avula, Yogesh, Adi Seshan Mula, and Vishal Onnala Kartheek Merugu. "Additive Manufacturing and Testing of a Prosthetic Foot Ankle Joint." International Journal of Trend in Scientific Research and Development Volume-3, Issue-3 (April 30, 2019): 958–61. http://dx.doi.org/10.31142/ijtsrd23216.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Platts, K. W., J. F. Mills, M. C. Bourne, A. D. Neely, A. H. Richards, and M. J. Gregory. "Testing manufacturing strategy formulation processes." International Journal of Production Economics 56-57 (September 1998): 517–23. http://dx.doi.org/10.1016/s0925-5273(97)00134-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Pimbley, Joseph M., and David A. McDevitt-Pimbley. "Optimal Testing in Semiconductor Manufacturing." IEEE Engineering Management Review 48, no. 4 (December 1, 2020): 174–80. http://dx.doi.org/10.1109/emr.2020.3022620.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Shakhnin, V. A. "Flexible manufacturing systems in nondestructive testing." Russian Journal of Nondestructive Testing 44, no. 2 (February 2008): 132–37. http://dx.doi.org/10.1134/s1061830908020083.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Coniam, F. E. "Computer Integrated Electronics Manufacturing and Testing." Manufacturing Engineer 70, no. 1 (1991): 44. http://dx.doi.org/10.1049/me:19910021.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Croitoru, A. Sorin Mihai, B. Adrian Pacioga, and C. Stanca Comsa. "Personalized hip implants manufacturing and testing." Applied Surface Science 417 (September 2017): 256–61. http://dx.doi.org/10.1016/j.apsusc.2017.02.185.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Shao, Guo Dong, Swee Leong, and Charles McLean. "Simulation-Based Manufacturing Interoperability Standards and Testing." Key Engineering Materials 407-408 (February 2009): 283–86. http://dx.doi.org/10.4028/www.scientific.net/kem.407-408.283.

Full text
Abstract:
Software applications for manufacturing systems developed using software from different vendors typically cannot work together. Develop¬ment of custom integrations of manufacturing software incurs costs and delays that hurt industry productivity and competitiveness. Software applications need to be tested in live operational systems. It is impractical to use real industrial systems to support dynamic interoperability test¬ing and research due to: 1) access issues - manu¬facturing facilities are not open to outsiders, as proprietary data and processes may be compro¬mised; 2) technical issues - operational systems are not instrumented to support testing; and 3) cost issues - productivity suffers when actual production systems are taken offline to allow testing. Publicly available simulations do not exist to demonstrate simulation integration issues, validate potential standards solu¬tions, or dynamically test the interoperability of simulation systems and other software applica¬tions. A new, dynamic, simulation-based interoperability testing facility for manufacturing software applications is being developed at the National Institute of Standards and Technology (NIST).
APA, Harvard, Vancouver, ISO, and other styles
9

Adair, D., and M. Jaeger. "Course Development: Integrated Design, Manufacturing and Testing." International Journal of Mechanical Engineering Education 42, no. 1 (January 2014): 61–72. http://dx.doi.org/10.7227/ijmee.42.1.6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Woodall, William H., and Forrest W. Breyfogle. "Statistical Methods for Testing, Development, and Manufacturing." American Statistician 47, no. 3 (August 1993): 235. http://dx.doi.org/10.2307/2684987.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Manufacturing testing"

1

Macdonald, Niall Patrick. "Microsystems manufacturing technologies for pharmaceutical toxicity testing." Thesis, University of Glasgow, 2013. http://theses.gla.ac.uk/5070/.

Full text
Abstract:
To meet the demands of political, ethical and scientific pressures on animal testing, research into possible alternatives is required. Data obtained with animal models often cannot be related to humans. Testing with current cell-based assays, microdosing and pharmacokinetic models contribute to reducing animal testing and improving the drug development process. Micro-fabrication and rapid prototyping techniques offer potential solutions to reduce the need for animal toxicity testing. The aim of this research was to develop biological platforms for in vitro toxicity testing to provide physiologically relevant, high-throughput solutions to reduce animal testing. This was achieved by investigating and integrating microfabrication methods of microfluidics, dielectrophoresis and additive manufacturing. Three approaches were taken: (i) micro-pattern protein arrays for primary hepatocyte cell culture enclosed within microfluidics devices for high-throughput toxicity testing. It was observed that hepatocytes attached to the micro-pattern within microfluidics and maintained viability, however liver specific functions observed by florescence assays, the P450 enzymes, were observed to be reduced compared to Petri dish conditions. (ii) A biomimetic dielectrophoretic cell patterning technique to form liver lobule-like tissue structures within agar on a paper substrate was developed for toxicity testing. Observation of these biomimetic micro liver structures showed high viability (80-90%) and an increase in liver specific function marker albumin protein (20%) compared to control samples after 48 hours. (iii) Rapid prototyping methods were explored with regard to fabrication of microfluidic chips for the automated trapping, imaging and analysis of zebrafish embryos. Monolithic microfluidic chips for zebrafish were developed to be suitable for optical based toxicity assays. The biocompatibility of 3D printed materials was investigated. A method to render the photopolymer Dreve Fototec 7150 compatible with zebrafish culture was observed to provide 100% viability. Future development of this research will aim to (i) develop the liver lobule-like system to use layers of multiple cell types to form complex micro-liver models using additive manufactured microfluidic systems for toxicity testing. (ii) Automation of zebrafish handing using additive manufactured microfluidic devices for in-situ analysis of dechorionated zebrafish for high-throughput toxicity studies.
APA, Harvard, Vancouver, ISO, and other styles
2

Nelson, Erik Tighe 1964. "Optimizing product testing in the electronics manufacturing industry." Thesis, Massachusetts Institute of Technology, 2000. http://hdl.handle.net/1721.1/34706.

Full text
Abstract:
Thesis (S.M.)--Massachusetts Institute of Technology, Sloan School of Management; and, (S.M.)--Massachusetts Institute of Technology, Dept. of Aeronautics and Astronautics; in conjunction with the Leaders for Manufacturing Program, Massachusetts Institute of Technology, 2000.
Also available online at the MIT Theses Online homepage .
Includes bibliographical references (p. 103).
This thesis provides insight into methods for data analysis of testing procedures to optimize the overall testing times within the electronics manufacturing industry. By analyzing each test regime within the manufacturing sequence individually, with the goal of overall test time reduction, better test system optimization may occur. Specifically, within Burn In testing it was found that failure rates were heavily dependent upon the device on/off cycle. Once discovered new test cycles were proposed to reduce overall test times by 50%. Once implemented such new test cycles increased early failure capture as expected. In addition, industry benchmarking studies showed new forms of testing such as Highly Accelerated Stress Testing (HAST) are pushing the product testing earlier into the product life cycle where in-process tests such as Burn In may be reduced. In the case of HAST testing, the tests are being conducted in the design phase reducing more costly Burn In testing in the production phase.
by Erik Tighe Nelson.
S.M.
APA, Harvard, Vancouver, ISO, and other styles
3

Lee, Dai Gil. "Manufacturing and testing of composite machine tool structures." Thesis, Massachusetts Institute of Technology, 1985. http://hdl.handle.net/1721.1/15265.

Full text
Abstract:
Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 1985.
MICROFICHE COPY AVAILABLE IN ARCHIVES AND ENGINEERING.
Vita.
Includes bibliographical references.
by Dai Gil Lee.
Ph.D.
APA, Harvard, Vancouver, ISO, and other styles
4

Shin, SangJoon 1967. "Design, manufacturing, and testing of an active twist rotor." Thesis, Massachusetts Institute of Technology, 1999. http://hdl.handle.net/1721.1/49684.

Full text
Abstract:
Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Aeronautics and Astronautics, 1999.
Includes bibliographical references (p. 153-156).
An Active Twist Rotor (ATR) is developed for future implementation of the individual blade control for vibration and noise reduction in helicopters. The rotor blade is integrally twisted by direct strain actuation using active fiber composites (AFC). In order to design and analyze an active blade, a general framework is proposed. A multi-cell thin-walled active composite beam model is developed. The model is validated against a combination of other theoretical models and experimental data. Actuation trend studies are conducted by examining the formulation, and the results are verified by numerical examples. Design requirements are proposed by combining general ones applicable to passive model-scaled rotor blade and specific ones to the current ATR blade. A design flowchart is established for the current design task of the ATR blade since it enables systematic handling of a number of the parameters. Several different concepts of ATR candidates are suggested, and compared with each other with regard to the requirements. Other design aspects such as manufacturing simplicity and cost-effectiveness are also considered in the process. The final design is selected, and final adjustments are added to it in order to simplify its manufacturing. A prototype blade is manufactured in accordance with the final design. A couple of testing articles are fabricated in advance to the full-span prototype in order to debug the manufacturing process. Various tests are conducted with the testing articles and the final prototype to verify the design and correlate with model predictions. A maximum static tip twist of 1.5' (peak-to-peak) was achieved at half of the designed operating electric field before five of the 24 AFC packs failed. Electrical breakdown of the embedded active material caused degradation of twist actuation in the prototype blade, and the causes are presently under investigation. The ATR prototype blade is leading to a complete fully-articulated four-blade active twist rotor system for future wind tunnel tests.
by SangJoon Shin.
S.M.
APA, Harvard, Vancouver, ISO, and other styles
5

D'Souza, Sachin. "Testing the intelligent machining workstation." Ohio : Ohio University, 2002. http://www.ohiolink.edu/etd/view.cgi?ohiou1038407081.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Iranmanesh, H. "Design and evaluation of on-line magnetic testing systems." Thesis, Cardiff University, 1992. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.359482.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Areir, Milad. "Development of 3D printed flexible supercapacitors : design, manufacturing, and testing." Thesis, Brunel University, 2018. http://bura.brunel.ac.uk/handle/2438/16659.

Full text
Abstract:
The development of energy storage devices has represented a significant technological challenge for the past few years. Electrochemical double-layer capacitors (EDLCs), also named as supercapacitors, are a likely competitor for alternative energy storage because of their low-cost, high power density, and high fast charge/discharge rate. The recent development of EDLCs requires them to be lightweight and flexible. There are many fabrication techniques used to manufacture flexible EDLCs, and these methods can include pre-treatment to ensure more efficient penetration of activated carbon (AC) patterns onto the substrate, or those that utilise masks for the definitions of patterns on substrates. However, these methods are inconvenient for building cost-effective devices. Therefore, it was necessary to find a suitable process to reduce the steps of manufacture and to be able to print multiple materials uniformly. This research work describes the first use of a 3D printing technology to produce flexible EDLCs for energy storage. In this research work, the four essential elements for the EDLCs substrate, current collector, activated electrode, and gel electrolyte were investigated. The AC powder was milled by ball milling to optimise the paste deposition and the electrochemical performance. A flexible composite EDLC was designed and manufactured by 3D printing. The electrochemical performance of the flexible composite EDLCs was then examined. Being highly flexible is one of the critical demands for the recent development of EDLCs. Therefore, highly flexible EDLCs were designed and manufactured by only one single extrusion process. The 3D highly flexible EDLC maintains significant electrochemical performance under a mechanical bending test. To meet the power and energy requirements, the EDLCs were connected and tested in series and parallel circuits. A supercapacitor based on printed AC material displays an area specific capacitance of 1.48 F/cm2 at the scan rate of 20 mV/s. The coulombic efficiency for the flexible EDLC was found to be 59.91%, and the cycling stability was achieved to be 56% after 500 cycles. These findings indicate that 3D printing technology may be increasingly used to develop more sophisticated flexible wearable electronic devices.
APA, Harvard, Vancouver, ISO, and other styles
8

Mannella, Nikolas E. "Design, Manufacturing, and Testing of a Pilot Wet Electrostatic Precipitator." Ohio University / OhioLINK, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1492558871480272.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Al-Khazali, Hisham Ahmad Humadi. "Application of modal testing methods in rotating machinery." Thesis, Kingston University, 2012. http://eprints.kingston.ac.uk/25256/.

Full text
Abstract:
The experimental and analytical modal analysis is used to establish a system modelling methodology in rotating structures, which subsequently can help in design and development of rotating machinery. The purpose of the study is to develop and use modal testing and vibration analysis which would involve obtaining the mathematical model of the system from the test data and subsequently obtaining the unbalanced parameters. The research work includes the application of modal testing method in rotor rig to investigate different modal parameters and detect the behaviour and performance of rotating machinery. This method would be capable of solving many of the related rotating machine problems, such as in turbine and compressor. Unbalance is one of the problems which exist in rotating machinery. Balancing is usually an expensive and laborious procedure and a balancing system would be beneficial for rotor dynamic systems and power generation applications. Excess vibration can cause noise, cyclic stress and wear in machinery. It is important to identify all the critical speeds within the range of operation and analyse the damping effect, mass unbalance and other phenomena in rotating machinery and their effects in their safe operation. These will be investigated in this study. There are several phenomena associated with rotating machinery such as centrifugal and gyroscopic forces which would create complexity in the mathematical procedures in modal analysis that they need to be addressed and interpreted appropriately before they could be used in modal testing of rotating machinery. The experimental technique used in this thesis to obtain the modal and dynamic response properties of structures. This technique has been applied to rotating structures, however the full implementation of modal testing in rotating structures and the implications are not fully understood. and are therefore in need of further investigations. In this study the Frequency Response Function (FRF) data obtained from the specific experimental results are curve-fitted by theoretical data regenerated from overall statistical analysis of measured data. Different excitation methods are used in experiment (hammer and shaker). For hammer test, transient signal is produced. While for shaker test, different vibration signals are produced (Sine, Random and Burst Random). In shaker test, a special frame was designed and used around a plain bearing and the accelerometers were attached to the outer surface of the bearing to measure the response of the lateral motion on several points of the shaft. The excitation force with help of push' rod was generated and applied to the shaft. This method can help to solve the problem in the attachment of shaker and force transducers to the rotor system. The analysis of vibration suppression with different locations and configurations of the unbalanced masses and effect of the adding of balance masses to suppress the vibration amplitude has been studied properly. The experimental results were used for verification of Finite Element (FE) models, since it has good capability for eigen analysis and also good graphical facility. 3-D models result in large number of nodes and elements. This project demonstrates how to extract a plane 2-D model from the 3-D model that can be used with fewer nodes and elements with no loss in accuracy of the results. Transient orbit analysis in the literature indicates that the bearing stiffness and damping affects the vibration amplitude. In this project the study of the effects on the bearing reaction forces and cyclic. bending stress will be investigated. It is envisaged that the approach is not limited to the condition diagnosis and predictive failure but could help the designers to have better understanding of rotor performance at the system design stage. The experimental data are used to characterise the dynamic behaviour of the system and introduce to the correction unbalance to suppress the excess vibration. The experimental data are also used to generate the FE models and subsequently calculate the dynamic reaction forces in the bearings and the cyclic bending stress.
APA, Harvard, Vancouver, ISO, and other styles
10

Egbert, Derek W. "Testing Guidelines for New Product Development." BYU ScholarsArchive, 2010. https://scholarsarchive.byu.edu/etd/2529.

Full text
Abstract:
While many literary sources outline the product development process, few make mention of the prototyping and testing stage. This thesis suggests that because of its importance in the product development process, "Testing" should be documented as a major step and not just listed as a side note. As part of the testing step, it is suggested that standardized, in-use, and market tests be used to properly evaluate a product. While many rely solely on standardized tests to validate their products, effective in-use tests can be another vital tool that can prove the performance of the product in more specific and relevant applications. In-use tests are a major focus in this thesis and the process of developing and using these in-use tests is explored. A case study is used to prove that effective product development will follow the outlined testing procedure. Also, it shows that in-use testing, combined with other types of testing, can be a vital tool to ensuring the successful launch of a newly developed product. As a result of the case study, the traditional new product development process is amended and a set of guidelines are proposed for use in constructing a successful testing methodology for the new product development process.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Manufacturing testing"

1

Maltitz, Ian Von. Black powder manufacturing, testing & optimizing. Dingmans Ferry, Pa: American Fireworks News, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Computer integrated electronics manufacturing and testing. New York: Marcel Dekker, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Breyfogle, Forrest W. Statistical methods for testing, development, and manufacturing. New York: Wiley, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Bitzer, Tom. Honeycomb technology: Materials, design, manufacturing, applications and testing. London: Chapman & Hall, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Bitzer, Tom. Honeycomb Technology: Materials, Design, Manufacturing, Applications and Testing. Dordrecht: Springer Netherlands, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Madry, Scott, Peter Martinez, and Rene Laufer. Innovative Design, Manufacturing and Testing of Small Satellites. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-75094-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ross, Robert B. Handbook of metal treatments and testing. 2nd ed. London: Chapman and Hall, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Liu, S. LED packaging for lighting applications: Design, manufacturing, and testing. Hoboken, N.J: Wiley, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

International Symposium on Advanced Optical Manufacturing and Testing Technologies (5th 2010 Dalian Shi, China). Smart structures and materials in manufacturing and testing: 5th International Symposium on Advanced Optical Manufacturing and Testing Technologies : 26-29 April 2010, Dalian, China. Edited by Jiang Yadong, Kippelen Bernard, Yu Junsheng, Zhongguo guang xue xue hui, Society of Photo-optical Instrumentation Engineers, Zhongguo ke xue yuan. Guang dian ji shu yan jiu suo, China. Guo jia ke xue ji shu bu, and Fraunhofer Institute for Applied Optics and Precision Engineering. Bellingham, WA: SPIE, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Lloyd's Register of Shipping (Firm : 1914- ). Rules for the manufacture, testing and certification of materials 1993. London: Lloyd's Register of Shipping, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Manufacturing testing"

1

Hull, Bobby. "Testing." In Manufacturing Best Practices, 11–31. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2014. http://dx.doi.org/10.1002/9781118983874.ch2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Watson, Kym. "Conformance Testing." In Communications for Manufacturing, 217–23. London: Springer London, 1990. http://dx.doi.org/10.1007/978-1-4471-1820-6_19.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Worzyk, Thomas. "Manufacturing and Testing." In Submarine Power Cables, 123–49. Berlin, Heidelberg: Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-642-01270-9_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Larrañeta, Eneko, and Thakur Raghu Raj Singh. "Microneedle Manufacturing and Testing." In Microneedles for Drug and Vaccine Delivery and Patient Monitoring, 21–70. Chichester, UK: John Wiley & Sons, Ltd, 2018. http://dx.doi.org/10.1002/9781119305101.ch2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Denel, A. D. "Non-destructive testing of composites." In Composite Manufacturing Technology, 342–65. Dordrecht: Springer Netherlands, 1995. http://dx.doi.org/10.1007/978-94-011-1268-0_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Wu, T. Y., and M. A. Gaynes. "Testing and characterization." In Manufacturing Challenges in Electronic Packaging, 114–55. Boston, MA: Springer US, 1998. http://dx.doi.org/10.1007/978-1-4615-5803-3_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Leutz, Ralf, and Akio Suzuki. "Prototype Design, Manufacturing, and Testing." In Springer Series in OPTICAL SCIENCES, 155–78. Berlin, Heidelberg: Springer Berlin Heidelberg, 2001. http://dx.doi.org/10.1007/978-3-540-45290-4_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Young, Richard. "Testing Issues in LED Manufacturing." In Solid State Lighting Technology and Application Series, 419–48. New York, NY: Springer New York, 2013. http://dx.doi.org/10.1007/978-1-4614-5091-7_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Drezga, Danijel, Viken Korian, Olaf Roock, Bernardo Lopez, Arne Fiedler, Stefan Storm, and Vladimir Snop. "Winglet Design, Manufacturing, and Testing." In Smart Intelligent Aircraft Structures (SARISTU), 257–73. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-22413-8_13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Di Natale, Giorgio, Marie-Lise Flottes, Bruno Rouzeyre, and Paul-Henri Pugliesi-Conti. "Manufacturing Testing and Security Countermeasures." In Hardware Security and Trust, 127–48. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-44318-8_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Manufacturing testing"

1

Pollicove, Harvey, Stephen D. Jacobs, Jeff Ruckman, and Michele Richard. "Next generation optics manufacturing." In Optical Fabrication and Testing. Washington, D.C.: OSA, 2000. http://dx.doi.org/10.1364/oft.2000.oma1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Jacobs, Stephen D. "Innovations in optics manufacturing." In Optical Fabrication and Testing. Washington, D.C.: OSA, 2004. http://dx.doi.org/10.1364/oft.2004.oma1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

du Jeu, Christian, Hélène Ducollet, Maryline Davi, Philippe Cheroutre, and Trevor B. Winstone. "Off-Axis Mirror Manufacturing." In Optical Fabrication and Testing. Washington, D.C.: OSA, 2006. http://dx.doi.org/10.1364/oft.2006.oftua4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Micali, Rosario, and James Winston. "Optics Manufacturing Technician Apprenticeship Program." In Optical Fabrication and Testing. Washington, D.C.: OSA, 2008. http://dx.doi.org/10.1364/oft.2008.jwd2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Nagata, S., Y. Nakahori, S. Mukai, J. Estrada, A. Shobe, M. Kamiura, and Y. Ikeda. "Cordierite Design, Manufacturing, and Performance." In Optical Fabrication and Testing. Washington, D.C.: OSA, 2019. http://dx.doi.org/10.1364/oft.2019.ot2a.1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Murphy, Paul E. "Leveraging interferometric metrology for precision manufacturing." In Optical Fabrication and Testing. Washington, D.C.: OSA, 2004. http://dx.doi.org/10.1364/oft.2004.otub1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Tricard, Marc, and Dan Bajuk. "Industrial Perspectives on Freeform Optics Manufacturing." In Optical Fabrication and Testing. Washington, D.C.: OSA, 2014. http://dx.doi.org/10.1364/oft.2014.ow3b.1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Bauman, Brian J., and Michael D. Schneider. "Design for Manufacturing: Tolerancing and Optimization." In Optical Fabrication and Testing. Washington, D.C.: OSA, 2019. http://dx.doi.org/10.1364/oft.2019.om2a.1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

BOURGOIS, Rémi, and Roland GEYL. "Manufacturing ELT optics: Year 2 report." In Optical Fabrication and Testing. Washington, D.C.: OSA, 2019. http://dx.doi.org/10.1364/oft.2019.om3a.3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Thomas, Michael. "Leica aspheric optic manufacturing process with MRF." In Optical Fabrication and Testing. Washington, D.C.: OSA, 2002. http://dx.doi.org/10.1364/oft.2002.omb6.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Manufacturing testing"

1

Morris, KC, David Flater, Don Libes, and AI Jones. Testing of interaction-driven manufacturing systems. Gaithersburg, MD: National Institute of Standards and Technology, 1998. http://dx.doi.org/10.6028/nist.ir.6260.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Slotwinski, John, April Cooke, and Shawn Moylan. Mechanical properties testing for metal parts made via additive manufacturing :. Gaithersburg, MD: National Institute of Standards and Technology, 2012. http://dx.doi.org/10.6028/nist.ir.7847.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Slotwinski, John, and Shawn Moylan. Applicability of Existing Materials Testing Standards for Additive Manufacturing Materials. National Institute of Standards and Technology, June 2014. http://dx.doi.org/10.6028/nist.ir.8005.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

McLean, Charles R., Sanjay, Jain, Y. Tina Lee, and Frank H. Riddick. A simulation and gaming architecture for manufacturing research, testing and traning. Gaithersburg, MD: National Institute of Standards and Technology, 2005. http://dx.doi.org/10.6028/nist.ir.7256.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Korinko, P., and D. David Maxwell. PINCH WELD TESTING TO SUPPORT CHANGE IN MANUFACTURING OIL AT THE KCP. Office of Scientific and Technical Information (OSTI), February 2008. http://dx.doi.org/10.2172/927599.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Nurprasetio, Pulung, Willy Kurnia, and Indra Nurhadi. Design and Manufacturing of Servo-Hydraulic Testing Machine for Rubber Engine Mounting. Warrendale, PA: SAE International, May 2005. http://dx.doi.org/10.4271/2005-08-0350.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Cavallaro, Paul V. Soft Body Armor: An Overview of Materials, Manufacturing, Testing, and Ballistic Impact Dynamics. Fort Belvoir, VA: Defense Technical Information Center, August 2011. http://dx.doi.org/10.21236/ada549097.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Forster, Aaron M. Materials Testing Standards for Additive Manufacturing of Polymer Materials: State of the Art and Standards Applicability. National Institute of Standards and Technology, May 2015. http://dx.doi.org/10.6028/nist.ir.8059.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Author, Not Given. Testing, Manufacturing, and Component Development Projects for Utility-Scale and Distributed Wind Energy, Fiscal Years 2006-2014. Office of Scientific and Technical Information (OSTI), April 2014. http://dx.doi.org/10.2172/1220848.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Coggeshall, C., and R. M. Margolis. Consortia Focused on Photovoltaic R&D, Manufacturing, and Testing: A Review of Existing Models and Structures. Office of Scientific and Technical Information (OSTI), March 2010. http://dx.doi.org/10.2172/974459.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Manufacturing testing' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography