Relevant bibliographies by topics / Maskiningenjör

Contents

  1. Dissertations / Theses

Academic literature on the topic 'Maskiningenjör'

Author: Grafiati
Published: 4 June 2021
Last updated: 6 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Maskiningenjör.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Dissertations / Theses on the topic "Maskiningenjör"

1

Hernvall, Jonsson Erik. "Konceptuell modell för ljusförsörjning i skyddsrum vid strömbortfall." Thesis, Karlstads universitet, Institutionen för ingenjörsvetenskap och fysik (from 2013), 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-72647.

Full text
Abstract:
In a parallel with the potential reestablishment of new production of swedish shelters, an awareness of a great potential of modernisation on swedish shelters has occurred. Sweden is in the process of a new potential production of modern swedish shelters, but there is a long process before all the technical details has been updated. This is a bachelor thesis for a degree in mechanical engineering at Karlstad university. The object of this report is to show how a shelter can be best supplied with light during a period when normal power fail. The recommendation of the report is to use wall mount
APA, Harvard, Vancouver, ISO, and other styles
2

Svensson, Erik, and Tero Viitala. "FEM- analys av standardräls BJV50 : Undersökning av belastningsfall vid vägning av malmvagn UID II." Thesis, University of Skövde, School of Technology and Society, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:his:diva-111.

Full text
Abstract:
<p>Då godsvagnar skall vägas med trådtöjningsgivare monterade i järnvägsräls finns ett antal faktorer som inverkar på mätresultatet. Denna rapport utreder genom datorbaserade simuleringar hur underlag och hastighet inverkar på töjningen i rälsen och även i viss mån hur deformationen i rälsen påverkas. Vidare utreds hur störningar i form av temperaturförändring samt förändring av kontaktkraften mellan vagnshjul och räls inverkar på töjningen. Förändringen av kontaktkraften kan exempelvis bero på hjulplatta, vibrationer från godsvagn eller ojämnheter i rälsen.</p><br><p>When goods wagons are wei
APA, Harvard, Vancouver, ISO, and other styles
3

Friberg, Carl-Johan, and John Gustavsson. "Lyftverktyg : Konstruktion av 3D-modell/modeller för lyftverktyg avsett för cylinderhuvud och emballage." Thesis, Högskolan i Skövde, Institutionen för teknik och samhälle, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:his:diva-8113.

Full text
Abstract:
Reservdelspaketering av cylinderhuvuden till personbilsmotorer för eftermarknaden sker idag för hand på ett företag i Skövde som tillverkar bilmotorer. Samtliga cylinderhuvuden lyfts för hand och placeras i wellpapplådor som levereras till återförsäljare. För att förbättra ergonomin för de anställda vid paketeringen samt att minska risken för skador på både anställda och cylinderhuvud har företaget efterfrågat ett lyftverktyg för att lyfta cylinderhuvudena med av konsultföretaget ÅF. Målet med detta arbete är således att utveckla en eller flera modeller av lyftverktyg som kan lyfta så många ol
APA, Harvard, Vancouver, ISO, and other styles
4

Malmberg, Roger, and Simon Hagberg. "Innovativt Drivpaket för Rullstol." Thesis, Halmstad University, School of Business and Engineering (SET), 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:hh:diva-1748.

Full text
Abstract:
<p>This is a thesis for a Bachelor Degree Project, performed in the subject Mechanical</p><p>Engineering. The students Roger Malmberg and Simon Hagberg have carried out a</p><p>design project on behalf of the recently established company J&D Assisting systems,</p><p>located in Halmstad.</p><p>The project consisted in developing J&D's first prototype of a power assisting solution</p><p>for wheelchairs. A power assisted wheelchair combines human power, which is delivered</p><p>by the arms through the pushrims, with electrical motors, which are powered by a battery.</p><p>The power assisted wheel
APA, Harvard, Vancouver, ISO, and other styles
5

Göransson, Daniel, and Jerry Haaga. "Framtagning av en mobilhållare för bilar." Thesis, Högskolan Väst, Avdelningen för maskinteknik och naturvetenskap, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:hv:diva-8317.

Full text
Abstract:
Syftet med det här examensarbetet har varit att utveckla och utforma en mobilhållare för bilar. En mobilhållare kan ha många funktioner, och med dagens lag om att kommunikationsutrustning inte får störa vid framförande av fordon får den en extra viktig roll. Hållaren har utvecklats för att möjliggöra enkel användning genom en kombination av flera användarvänliga funktioner. Några exempel på funktioner är enkel montering och demontering av mobiltelefon, automatisk sammankoppling med bil samt trådlös laddning. Genom en strukturerad produktutvecklingsprocess, där beprövade metoder har använts för
APA, Harvard, Vancouver, ISO, and other styles
6

Andersson, Viktor, and Martin Olsén. "Kilhus i plast : Omläggning av stålprodukt till produkt i plast." Thesis, Högskolan i Halmstad, Sektionen för ekonomi och teknik (SET), 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:hh:diva-4490.

Full text
Abstract:
Abstract Our bachelor degree thesis was carried out in collaboration with Ivar Petterssons Järnmanufaktur AB in Smålandsstenar. We were asked to replace their wedge housing, used to fasten the wires to the power lines, with a similar structure in a plastic material. The idea for this project started with Ivar Petterssons Järnmanufaktur AB having problems with the casting quality that forced them to perform expensive tests on each of the wedge houses to ensure the quality. They are currently produced in China which is also a major drawback because it requires expensive long delivery times. The
APA, Harvard, Vancouver, ISO, and other styles
7

Klevsäter, Anton. "Ytbehandling för att motverka uppbyggning : Undersökning av olika ytbehandlingsmetoder och material för applikation i en mjukpappersmaskin." Thesis, Karlstads universitet, Institutionen för ingenjörsvetenskap och fysik, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-55245.

Full text
Abstract:
This exam report includes a survey of surface treatment materials and their associated surface treatment methods for application in a tissue machine commissioned by Valmet AB. The tissue machine produces 24 hours a day in a demanding environment consisting of water, heat, oils, glue, dust and various chemicals. The demanding environment makes it difficult to maintain the machine clean due to the limited access at various machine parts when the machine is operating, which can lead to both personal risks and risks for production stoppages. These factors form the basis for the build-ups that take
APA, Harvard, Vancouver, ISO, and other styles
8

Lindgren, Arne. "Development of Brake Cooling." Thesis, Högskolan i Halmstad, Akademin för ekonomi, teknik och naturvetenskap, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:hh:diva-31225.

Full text
Abstract:
Sports cars need efficient brake cooling as they shall perform well during hard driving conditions, like for example race track driving. Most sports cars use ducts that capture ambient airflow and directs this flow over the brakes to improve the cooling. This project was conducted in cooperation with Koenigsegg Automotive AB and aims to develop more efficient brake cooling ducts for their cars.  Computational Fluid Dynamics was used to analyse the convective cooling of the brake disc and the pads. First was the cooling with the previously used ducts analysed in order to establish a reference.
APA, Harvard, Vancouver, ISO, and other styles
9

Andersson, Daniel, and Robin Florbrant. "Design of a Test Equipment : Quality Control on Hydraulic Quick Couplings Used in the Excavation Industry." Thesis, Luleå tekniska universitet, Institutionen för ekonomi, teknik och samhälle, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-80689.

Full text
Abstract:
Construction machines use quick couplers to rapidly change the attached tool. The gear lets the machine operator control the hooking and unhooking of the tool from inside of the cabin. This saves time and makes construction work much easier for the workers. The quick coupler is most commonly used on excavators, placed at the outer end of the excavator arm. The tool which the quick coupler connects to needs to have an adapter welded on it for the coupling process to work. Both quick coupler and adapter are equipped with hydraulic quick couplings, the female halves in the quick coupler and the m
APA, Harvard, Vancouver, ISO, and other styles
10

Svensson, Erik, and Marcus Wiechert. "Abrasiv nötning av polymerer tillverkade genom 3D-skrivning." Thesis, Högskolan i Skövde, Institutionen för ingenjörsvetenskap, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:his:diva-11124.

Full text
Abstract:
Volvo Cars in Skövde manufacture and assemble Volvo engines. When attaching the ignition coil to all 4-cylinder engines, a special mounting tool is required. This mounting tool is currently manufactured from injection-molded polyoxymethylene (POM), a thermoplastic. It has been noted that the life span of the tool is shortened as a result of abrasive wear that occurs during the attachment process of the ignition coil. An investigation of the possibility of manufacturing the mounting tool with a 3D-printer is undertaken in cooperation with ÅF, a consultant to Volvo Cars. A literature study is fi
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography