Log in

Relevant bibliographies by topics / Material and technical conditions / Dissertations / Theses

To see the other types of publications on this topic, follow the link: Material and technical conditions.

Dissertations / Theses on the topic 'Material and technical conditions'

Author: Grafiati

Published: 2 June 2025

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 dissertations / theses for your research on the topic 'Material and technical conditions.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Majtánová, Romana Viktória. "Hodnocení stavebně technického stavu objektu." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-240166.

Full text

Abstract:

This work deals with construction material research office building with eighteen floors to the street Šumavská 35 in Brno with ground plan dimensions of about 25 x 25 m. The structure consists of a reinforced concrete substructure and floors of steel frame. The scope of the survey will determine the quality of concrete in vertical supporting columns at level 1. PP structures using cores and subsequent laboratory testing. Another task will be to verify the status of moorings steel perimeter columns to the building of reinforced concrete pillars at the boundary of 1st basement and 1st floor.

APA, Harvard, Vancouver, ISO, and other styles

2

Mahmoudi, Farhad. "Hospital Functional Performance under Surge Conditions: Socio-Technical Resilience Perspective." Thesis, Griffith University, 2019. http://hdl.handle.net/10072/389855.

Full text

Abstract:

Contemporary society is becoming increasingly reliant on critical infrastructure (CI), which contributes to the wellbeing of its populations. One of the CI sectors that most strongly supports society is healthcare, with hospitals a critical healthcare infrastructure that contributes to society by providing numerous healthcare services, especially when dealing with the effects of disastrous events. Any disruption in hospitals’ performance—either by physical damage or functional disruption—can have negative consequences on their effective response to disastrous events, which can worsen the outco

APA, Harvard, Vancouver, ISO, and other styles

3

SASANI, Anahita. "Material and Technical Analysis of Armenian Wall Paintings in New Julfa, Isfahan." Doctoral thesis, Università degli studi di Ferrara, 2015. http://hdl.handle.net/11392/2389079.

Full text

Abstract:

The 17th century is the time of new changes in Iranian relationship with the West and especially European countries. In that era, Armenian merchants, were one of the main channels for bringing European art styles, in particular, paintings to Iranian culture. Although many of such paintings and art works deteriorated during the last century due to the waves of modernization in Iran, some of them are preserved in Armenian churches and houses in New Julfa of Isfahan. Reliable historical sources refer to some Armenian buildings in New Julfa which decorated with both oriental and European art work

APA, Harvard, Vancouver, ISO, and other styles

4

Dziuba, Oleksii. "Professional formation of new conditions of globalization for specialist of technical direction." Thesis, Київський національний університет технологій та дизайну, 2019. https://er.knutd.edu.ua/handle/123456789/13061.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Songur, Yasemin. "Waffle Contrasts : Reinterpreting the Traditional Waffle Weave through Technical, Material and Colour Research." Thesis, Högskolan i Borås, Akademin för textil, teknik och ekonomi, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:hb:diva-23801.

Full text

Abstract:

Asking the question: How can the waffle weave be reinterpreted through material, technical and colour research, the investigation of this MA thesis revolves around the weaving technique with the aim of presenting a collection of various woven textiles, where the waffle has been used in different ways. The weave, with its three- dimensional structure creates an interesting canvas to experiment upon as its structure creates both texture as well as depth to the textile. Furthermore, the research is conducted through a systematic exploration of the different aspects mentioned above, where theory a

APA, Harvard, Vancouver, ISO, and other styles

6

Suvanen, Johan. "Technical Conditions and Organizational Aspects for Remote Treatment Planning: a Developing Country’s Perspective." Thesis, KTH, Skolan för teknik och hälsa (STH), 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-155690.

Full text

Abstract:

Radiotherapy (RT) is the most common treatment for cancer. The state-of- the-art modality for RT is the linear accelerator. However, the availability for linear accelerators in the developing world is limited due to costs, infrastructure and need for educated personnel. The development in telecommunica- tions can help to increase the availability by connecting radiation RT-centers and have a central treatment planning unit. Scandinavian Care is a com- pany that builds RT-centers in developing countries and has a project in India where three centers should to be connected. The thesis objectives

APA, Harvard, Vancouver, ISO, and other styles

7

Gudkova, N. "Students' independent work in the conditions of module teaching English at technical universities." Thesis, Київський національний університет технологій та дизайну, 2018. https://er.knutd.edu.ua/handle/123456789/10555.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Finnane, Anna, Clara Curiel-Lewandrowski, Glen Wimberley, et al. "Proposed Technical Guidelines for the Acquisition of Clinical Images of Skin-Related Conditions." AMER MEDICAL ASSOC, 2017. http://hdl.handle.net/10150/624154.

Full text

Abstract:

IMPORTANCE Standardizing dermatological imaging is important to improve monitoring of skin lesions and skin conditions, ensure the availability of high-quality images for teledermatology, and contribute to the development of a robust archive of skin images to be used for research. OBJECTIVE To provide guidelines for the clinical application of the Standards for Dermatological Imaging set forward by the ISIC. EVIDENCE REVIEW The ISIC recommendations were developed through a hybrid Delphi methodology. Themethods for achieving consensus have been described previously. The practical application of

APA, Harvard, Vancouver, ISO, and other styles

9

Rangamani, Padmini. "Bioprocessing Conditions for Improving the Material Properties of Tissue Engineered Cartilage." Thesis, Georgia Institute of Technology, 2005. http://hdl.handle.net/1853/7140.

Full text

Abstract:

Cartilage tissue engineering is an emerging treatment option for osteoarthritis and trauma related joint injuries. A continuing challenge for cartilage tissue engineering is increasing construct extracellular matrix production and material properties. Shear stress and oxygen tension play an important role in tissue engineering of cartilage. In this select stimulatory conditions using combinations of shear stress and oxygen tension have been used to enhance the construct extracellular matrix deposition and material properties. Additionally, a perfusion concentric cylinder bioreactor has bee

APA, Harvard, Vancouver, ISO, and other styles

10

Bengtsson, Susanna, and Victor Olsson. "Leveraging Collective Wisdom : Organizational Conditions to Enhance Knowledge Sharing in a Technical Consultancy Firm." Thesis, KTH, Fastigheter och byggande, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-125040.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Kuuyelleh, Esmond Naalu. "An Examination of Academic Staff Conditions of Employment and Turnover in Ghanaian Technical Universities." Thesis, Curtin University, 2020. http://hdl.handle.net/20.500.11937/79931.

Full text

Abstract:

This thesis employed the theory of organisational equilibrium to examine academic staff turnover and retention in Ghanaian technical universities. The findings highlight three converging domains of factors underpinning academic staff turnover: personal factors, organisation-wide factors and external factors. The findings have significant implications for Ghana’s education policies, and for the human resource policies of technical universities, especially if Ghana’s goal is to improve the development of its human capital and build its vocational education sector.

APA, Harvard, Vancouver, ISO, and other styles

12

Sung, Mei-Ying. "Technical and material studies of William Blake's engraved Illustrations of the Book of Job (1826)." Thesis, Nottingham Trent University, 2005. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.431910.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Khennache, Mehdi. "Influence des conditions de culture et de transformation du lin sur les caractéristiques chimique, physique et mécanique de la fibre de lin technique pour une application en matériaux composites biosourcés." Thesis, Normandie, 2020. http://www.theses.fr/2020NORMR103.

Full text

Abstract:

Les matériaux composites à base de renforts naturels ne cessent d’évoluer vers des produits qui sont, soit le moins coûteux possible, soit le plus performant, et dans l’idéal les deux à la fois. Dans un souci de protection de l’environnement et de santé publique, leur utilisation est devenue un enjeu majeur et le sera plus encore dans un avenir proche et à long terme. L’industrie automobile s’intéresse par exemple de plus en plus aux fibres végétales afin d’utiliser des matières renouvelables et pérennes, et pour alléger les véhicules dont la masse est responsable de 75 % de la consommation en

APA, Harvard, Vancouver, ISO, and other styles

14

BENTLEY, JEFFERY WESTWOOD. "ETHNOGRAPHIC STUDY OF A RURAL PARISH IN NORTHWEST PORTUGAL (ECOLOGY, TECHNICAL CHANGE, AGRICULTURE, AND FRAGMENTATION, SOCIAL STRUCTURE)." Diss., The University of Arizona, 1986. http://hdl.handle.net/10150/183893.

Full text

Abstract:

This dissertation provides a quantitative analysis of cultural ecology and social structure in a rural parish in Northwest Portugal. There is greater economic inequality, and greater social stratification than most ethnographers of Iberia have described. Chapter 1 introduces some of the material indications of wealth and land inequality in the community. Some households are shown to have much more land and dairy cattle than others. Chapter 2 discusses nickname behavior as a set of socio-cultural symbols for expressing an ideal of equality, which in some sense runs counter to material differenc

APA, Harvard, Vancouver, ISO, and other styles

15

Talks, Miles Garston. "Erosion and corrosion of cast irons under cavitating conditions." Thesis, Coventry University, 1991. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.303009.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

Pocevičius, Mantas. "Uždarosios akcinės bendrovės "B-System" materialinio - techninio aprūpinimo sistemos efektyvumo įvertinimas ir tobulinimo galimybių numatymas." Master's thesis, Lithuanian Academic Libraries Network (LABT), 2007. http://vddb.library.lt/obj/LT-eLABa-0001:E.02~2007~D_20070816_163028-43114.

Full text

Abstract:

Baigiamajame magistro darbe siekiama teorinių metodų ir modelių pagalba įvertinti UAB „B-System“ materialinio-techninio aprūpinimo sistemos efektyvumą bei suformuoti šios sistemos tobulinimo kryptis. Pirmoje darbo dalyje atskleidžiama materialinio-techninio aprūpinimo bei išteklių samprata ir esmė; atliekama koncepcinių materialinio-techninio aprūpinimo sistemos organizavimo prielaidų bei akademinių materialinio-techninio aprūpinimo sistemos efektyvumo vertinimo metodų ir modelių analizė. Antroji darbo dalis skirta UAB „B-System“ materialinio-techninio aprūpinimo sistemos efektyvumo tyrimui at

APA, Harvard, Vancouver, ISO, and other styles

17

Ward, Anthony John. "Extensive development of the Canadian Prairies : a micro analysis of the influence of technical change." Thesis, University of British Columbia, 1990. http://hdl.handle.net/2429/31409.

Full text

Abstract:

This thesis examines the rate and pattern of settlement of the Canadian Prairies over the period of the 'Wheat Boom'. The principal aim of the work Is to explain the economic reasons for the late start to that settlement. Economic growth of the Canadian Prairies did not begin until almost the turn of the 20th. century, long after the initial occupation of the American West. I hypothesise in this thesis that the delay in the development of the Canadian Prairies was principally due to an initial lack of appropriate technology. The growing season In Canada is shorter than that further south, lea

APA, Harvard, Vancouver, ISO, and other styles

18

Zissopoulos, Pantelis. "Shortcrete under triaxial stress conditions : material properties and their use in structural analysis." Thesis, Imperial College London, 1998. http://hdl.handle.net/10044/1/11380.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

Svärd, Antonia. "Effect of raw material and Kraft Pulping Conditions on Characteristics of Dissolved Lignin." Thesis, KTH, Skolan för kemivetenskap (CHE), 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-145900.

Full text

Abstract:

Lignin is one of the main components in wood and during the chemical pulping processes it is degraded and dissolved into the cooking liquor. The current challenge is to meet the need for energy and raw materials, and reform to a more environmentally sustainable society, so there is a great interest in using kraft lignin as a raw material for energy, materials and as source of chemicals. ) To meet this goal, it is essential to obtain kraft lignin with desirable properties. The overall goal of this master thesis project was to understand the relationship between kraft process conditions and the

APA, Harvard, Vancouver, ISO, and other styles

20

DRENSKY, GEORGE K. "EXPERIMENTAL INVESTIGATION OF COMPOSITE MATERIAL EROSION CHARACTERISTICS UNDER CONDITIONS ENCOUNTERED IN TURBOFAN ENGINES." University of Cincinnati / OhioLINK, 2007. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1178118863.

Full text

APA, Harvard, Vancouver, ISO, and other styles

21

Joseph, Ben [Verfasser]. "Technical and environmental assessment of energy and material production from rural and urban residual biomass / Ben Joseph." Kassel : Universitätsbibliothek Kassel, 2020. http://d-nb.info/121354405X/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

22

Davis, Irarrazabal Sergio Michael. "Atomistic Computer Simulations of the Melting Process and High Pressure Conditions." Licentiate thesis, KTH, Materials Science and Engineering, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-4826.

Full text

Abstract:

<p>The present work describes the use of atomistic computer simulations in the area of Condensed Matter Physics, and specifically its application to the study of two problems: the dynamics of the melting phase transition and the properties of materials at extreme high pressures and temperatures, problems which defy experimental measurements and purely analytical calculations.</p><p>Both classical Molecular Dynamics (using semi–empirical interaction potentials) and first–principles (<em>ab initio</em>) Molecular Dynamics techniques has been applied in this study to the calculation of melting cu

APA, Harvard, Vancouver, ISO, and other styles

23

Davis, Sergio. "Atomistic Computer Simulations of the Melting Process and High Pressure Conditions." Licentiate thesis, KTH, Tillämpad materialfysik, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-4826.

Full text

Abstract:

The present work describes the use of atomistic computer simulations in the area of Condensed Matter Physics, and specifically its application to the study of two problems: the dynamics of the melting phase transition and the properties of materials at extreme high pressures and temperatures, problems which defy experimental measurements and purely analytical calculations. Both classical Molecular Dynamics (using semi–empirical interaction potentials) and first–principles (ab initio) Molecular Dynamics techniques has been applied in this study to the calculation of melting curves in a wide ran

APA, Harvard, Vancouver, ISO, and other styles

24

Frazzoli, Alessandra. "Determination of hydration properties of insoluble plant material with different methods under physiological conditions /." Zürich : ETH, 2007. http://e-collection.ethbib.ethz.ch/show?type=diss&nr=17305.

Full text

APA, Harvard, Vancouver, ISO, and other styles

25

Brownfield, Christopher Scott. "Phosphorus dissolution in soil material from a Carolina bay as affected by reducing conditions." NCSU, 2007. http://www.lib.ncsu.edu/theses/available/etd-05092007-122444/.

Full text

Abstract:

The restoration of drained agricultural soils to wetlands may result in the dissolution of P from reduced soils, causing the eutrophication of nearby surface waters. Therefore, continued improvements in the ability to predict P dissolution are necessary to minimize its potential environmental hazard. The objectives of this project were to determine if P dissolution would occur when soil material from a drained Carolina bay wetland was reduced, and to hypothesize explanations of differences in P dissolution between soils based on aqueous solution chemistry. Suspensions (15 g kg-1) of < 53 μm se

APA, Harvard, Vancouver, ISO, and other styles

26

Watson, J. S. "Effect of fermentation conditions on release of intracellular material from Bacillus amyloliquefaciens by autolysis." Thesis, Teesside University, 1986. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.372856.

Full text

APA, Harvard, Vancouver, ISO, and other styles

27

Wutyi, Naing. "Anthropogenic Waste Management Using Material Flow Analysis Under Data Limited Conditions in Mandalay, Myanmar." Kyoto University, 2019. http://hdl.handle.net/2433/244540.

Full text

APA, Harvard, Vancouver, ISO, and other styles

28

BRESCIANI, ANDREA. "INTERPLAY BETWEEN RAW MATERIAL AND PROCESSING CONDITIONS FOR THE FORMULATION OF PULSE-BASED PRODUCTS." Doctoral thesis, Università degli Studi di Milano, 2022. http://hdl.handle.net/2434/940378.

Full text

Abstract:

As modern consumers are becoming increasingly conscious about health and sustainability, they are demanding plant-based tasty and convenient food products. In this context, using pulses in food formulations has strongly grown owing to their agronomic, nutritional and health benefits. In the scenario of reformulating food products with pulses, extrusion plays a key role as it can lead to a wide range of products such as snacks, pasta, and meat analogues. Although some studies provided information on the suitability of pulse extrusion, it is still unclear which pulse performs better for ea

APA, Harvard, Vancouver, ISO, and other styles

29

Filippa, Kenne. "Breakfast-Piece by Nicolaes Gillis : A comparative study of material perspectives." Thesis, Stockholms universitet, Institutionen för kultur och estetik, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:su:diva-182721.

Full text

APA, Harvard, Vancouver, ISO, and other styles

30

Cooper-Searle, Simone. "Industry and policy implementation of material efficiency." Thesis, University of Cambridge, 2018. https://www.repository.cam.ac.uk/handle/1810/273169.

Full text

Abstract:

The UK has committed to deep, long-term reductions in national greenhouse gas emissions as part of a global effort to address climate change. Material efficiency, reducing the material inputs per service output, has long been identified as a globally underexplored mitigation strategy. Previous studies show unrealised technical potential to improve the efficiency of steel use, a large contributor of industry emissions, in the UK. This thesis explores why these opportunities may be unrealised along the steel supply chain.

APA, Harvard, Vancouver, ISO, and other styles

31

Hinz, Marcin [Verfasser]. "Concept for Machine Learning and Field Data driven Adjustment of Testing Conditions of Technical Prototypes / Marcin Hinz." Aachen : Shaker, 2018. http://d-nb.info/1162794208/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

32

Engström, Fredrik. "Mineralogical influence of different cooling conditions on leaching behaviour of steelmaking slags." Licentiate thesis, Luleå tekniska universitet, Industriell miljö- och processteknik, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-26246.

Full text

Abstract:

The Swedish steelmaking industry produces large amounts of by-products. In 2006, the total amount of slag produced reached approximately 1 375 000 metric tons, of which 30% was deposited. Due to its strength, durability and chemistry, steel slag is of interest in the field of construction due to it's similarities with ordinary ballast stone. However, some steel slags face an array of quality concerns that might hinder their use. These concerns generally involve the following physical and chemical properties: Volume expansion, Disintegration, Leaching of metals By controlling and modifying proc

APA, Harvard, Vancouver, ISO, and other styles

33

Matharu, Channan Singh. "Friction and wear of engineering ceramics under sliding conditions at elevated temperatures." Thesis, Brunel University, 1989. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.328848.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

Locke, W. R. "The growth of small fatigue cracks under conditions of confined notch plasticity." Thesis, University of Portsmouth, 1992. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.303183.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

Kotsikos, George. "Environment sensitive fracture of Al-Zn-Mg welds under cyclic loading conditions." Thesis, University of Abertay Dundee, 1992. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.306517.

Full text

APA, Harvard, Vancouver, ISO, and other styles

36

Souza, Mara Cristina Bicudo de 1959. "O trabalho no centro de material e esterilização." [s.n.], 2012. http://repositorio.unicamp.br/jspui/handle/REPOSIP/312454.

Full text

Abstract:

Orientador: Aparecida Mari Iguti<br>Tese (doutorado) - Universidade Estadual de Campinas, Faculdade de Ciências Médicas<br>Made available in DSpace on 2018-08-19T21:11:40Z (GMT). No. of bitstreams: 1 Souza_MaraCristinaBicudode_D.pdf: 3073972 bytes, checksum: e9813fc016ffc23f43fea5232bf45b42 (MD5) Previous issue date: 2012<br>Resumo: Introdução: O Centro de Material e Esterilização (CME) é parte fundamental de suporte à assistência hospitalar, mas tem sido pouco estudado, em relação às questões de trabalho-saúde. A realização desta pesquisa justifica-se pela importância do setor na esfera hos

APA, Harvard, Vancouver, ISO, and other styles

37

Nibler, Andreas. "Technical and commercial evaluation of material supply concepts for a car-assembly hall from an external supply centre." Thesis, KTH, Industriell produktion, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-154995.

Full text

Abstract:

The subject of this master thesis is to evaluate the technical and commercial efficiency of different material supply concepts for the assembly hall of the BMW production plant in Munich from an external supply centre. The material supply can either be carried out via public roads or via a bridge that directly connects the external supply centre with the assembly hall. The aim is to develop and implement a methodological procedure for the technical and commercial evaluation of applicable conveyor and transportation systems. This methodological procedure shall provide a basis for decision-makin

APA, Harvard, Vancouver, ISO, and other styles

38

Galbraith, Angelene Rae. "The threat of adverse weather on socio-technical systems: A case study on Australian surface mines." Thesis, Griffith University, 2018. http://hdl.handle.net/10072/382732.

Full text

Abstract:

Adverse weather conditions have long been known to introduce safety risks to any industry whereby workers have exposure to the elements. Despite this awareness, there is little published and peer-reviewed evidence to indicate that researchers and practitioners have invested effort into understanding weather as a safety issue, resulting in fear of the unknown danger and leading organisations to cease or highly restrict work activities until conditions return to normal and the system can operate as designed. In particular, the models of safety that are favoured by practitioners are often not tes

APA, Harvard, Vancouver, ISO, and other styles

39

Forysewicz, Monika. "Analysis of the deformation and stress condition in the visco-elastic-plastic materials processing area during a high-speed single-blade cutting : PhD thesis summary : [synopsis]." Rozprawa doktorska, [s.n.], 2015. http://dlibra.tu.koszalin.pl/Content/1058.

Full text

APA, Harvard, Vancouver, ISO, and other styles

40

Baskar, Abishek. "Feasibility study on Thermal Anemometry at LWR conditions." Thesis, KTH, Fysik, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-298521.

Full text

Abstract:

Dryout and Departure from Nucleate boiling (DNB) are utmost thermal-hydraulic concerns for the safety of LWRs. The behavior of two-phase flows at these conditions is still not fully understood. There is at least a need for a good local velocity and void fraction database at these conditions. This database can be exploited by CFD codes, thereby leading to understanding and predicting DNB and boiling crisis. Since these conditions occur in LWR at pressures greater than 70 bar and temperatures above 285 $^oC$, most instrumentations fail at these conditions. So there is a need for developing or op

APA, Harvard, Vancouver, ISO, and other styles

41

Häggström, Klara. "Conditions for e-learning at companies : Technical and pedagogical problems or e-learning at an IT consultant company." Thesis, KTH, Skolan för teknikvetenskaplig kommunikation och lärande (ECE), 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-155535.

Full text

Abstract:

The purpose of this study is to research possibilities to create educational programs at large companies that engage employees using the company intranet to contribute to the development and efficiency of the business. The goal is to through experience of employees and related research suggest pedagogically and technically effective methods to introducing company employees to an intranet. The importance of this study lies in its potential to increase a more operational use of intranets. What has been done in this thesis is an investigation of what a large consultant company need in terms of in

APA, Harvard, Vancouver, ISO, and other styles

42

Ronayne, Megan Gwyneth. "Manufacturing textile futures : adaptation, competitiveness and the evolution of UK technical textile firms." Thesis, University of Birmingham, 2016. http://etheses.bham.ac.uk//id/eprint/6691/.

Full text

Abstract:

Manufacturing continues to be the fabric of the UK economy, as firms have transformed and restructured themselves in response to new forms of competition, alterations in consumer demand and new technological developments. This thesis applies Evolutionary Economic Geography (EEG) approaches to the UK Technical Textile (TT) sector to investigate the adaptation and evolution of UK TT firms. TT is a higher value-added and advanced segment of the textiles industry. The thesis blends EEG approaches with the Resource-Based View (RBV) of the firm into a new conceptual framework to develop a novel firm

APA, Harvard, Vancouver, ISO, and other styles

43

Asbjørn, Sörensen Charlotte. "A Material Framework for Product Design." Licentiate thesis, Malmö universitet, Malmö högskola, Institutionen för konst, kultur och kommunikation (K3), 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:mau:diva-7446.

Full text

Abstract:

A new paradigm is slowly making its way into society, affecting our material practice as designers. Materials selection in design and product development has for a long time been dominated by a purely technical approach, mainly focusing on properties and performance. With the increasing evidence of climate change, waste and pollution, environmental effects, we are slowly realizing that unsustainable consumption of materials is no longer an alternative. Previous studies of material practices, both within design educations and the design profession, has primarily dealt with the development of ma

APA, Harvard, Vancouver, ISO, and other styles

44

Hart, A. M. "Gauging preservation : the effects of oxidising conditions in soils on the preservation of archaeological material data." Thesis, University of Cambridge, 2007. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.603798.

Full text

Abstract:

The development of a comparative database (CDB) based on the relative deposition of iron oxide in soils, and how this relates to variations in oxidising conditions, provides a platform for identifying differing hydrological environments within archaeological sites. The CDB is developed by using geophysical, geochemical and soil micromorphological analyses on non-archaeological sites, representing four major soil/geology types and environments. Oxidation experiments were carried out on these samples to asses the variation between differing rates of oxidation and seasonality influences. Once con

APA, Harvard, Vancouver, ISO, and other styles

45

GUTIERREZ, LUCAS LUDEÑA. "FORMULATION AND SOME APPLICATIONS OF MATERIAL POINT METHOD IN GEOTECHNICAL PROBLEMS IN STATIC AND DYNAMIC CONDITIONS." PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 2016. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=33844@1.

Full text

Abstract:

PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO<br>COORDENAÇÃO DE APERFEIÇOAMENTO DO PESSOAL DE ENSINO SUPERIOR<br>PROGRAMA DE EXCELENCIA ACADEMICA<br>Em problemas geotécnicos podem ocorrer grandes deformações devido a chuvas prolongadas, sismos, deslizamentos de encostas, etc. Material point method (MPM) é um método de solução baseado no Método dos Elementos Finitos (MEF) que oferece vantagens para o cálculo estático e dinâmico que envolve deformações desse tipo. O objetivo desta dissertação é utilizar o MPM em problemas geotécnicos em condições estáticas e dinâmicas. Esta pesquisa mostra

APA, Harvard, Vancouver, ISO, and other styles

46

Akyol, Ali Akin. "Material Characterization Of Ancient Mural Paintings And Related Base Materials: A Case Study Of Zeugma Archaeological Area." Phd thesis, METU, 2009. http://etd.lib.metu.edu.tr/upload/3/12611185/index.pdf.

Full text

Abstract:

In this study, two sample sets from Zeugma Archaeological Area had been examined. The sample Set I includes 7 sediment, 18 stone, 4 brick/roof tile, 9 mortar, 4 plaster samples and the sample Set II consists of 24 mural painting samples. Samples were examined to get their raw material characteristics, mineralogical and chemical compositions, and microstructural properties using various analytical techniques such as Optical Microscopy, XRD, FTIR, PED-XRF, SEM-EDX and Raman Spectroscopy. In addition, mikroclimatic monitorings for temperature and relative humidity were also performed in that area

APA, Harvard, Vancouver, ISO, and other styles

47

Dip, Tatiana Maciulis. "Otimização de condições operacionais de processo visando a minimização da emissão de material particulado na incineração industrial de resíduos perigosos." Universidade de São Paulo, 2004. http://www.teses.usp.br/teses/disponiveis/18/18135/tde-14022005-132933/.

Full text

Abstract:

Busca-se a minimização da emissão de material particulado em incinerador industrial de resíduos perigosos através do controle operacional de algumas variáveis de processo. Essas variáveis, que afetam diretamente a qualidade da queima, são: intervalo de tempo de alimentação, modo de introdução de pequena quantidade de resíduo líquido no forno rotativo e excesso de oxigênio na saída dos gases de combustão. Todos os testes têm a mesma taxa de resíduos incinerados (kg/h). Na faixa estudada, o controle operacional mostrou resultados expressivos: em todos os casos, para cada variável estudada, a emi

APA, Harvard, Vancouver, ISO, and other styles

48

Munther, Per A. "The effect of material and process parameters on the frictional conditions in hot flat rolling of steels." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk2/tape17/PQDD_0008/NQ30633.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

49

Das, Sumitesh. "The effect of boundary conditions and material data representation on the simulation of deformation during hot rolling." Thesis, University of Sheffield, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.269410.

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

Ayvaz, Huseyin. "Influence of Packaging Material and Storage Conditions on the Quality Attributes of Pressure-Assisted Thermally Processed Carrots." The Ohio State University, 2010. http://rave.ohiolink.edu/etdc/view?acc_num=osu1281125846.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!