Academic literature on the topic 'Material and technical support'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Material and technical support.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Material and technical support"

1

Musurmonov, Shodiyor Faxridinovich. "THEORETICAL AND LEGAL BASIS OF MATERIAL TECHNICAL SUPPORT." EURASIAN JOURNAL OF ACADEMIC RESEARCH 2, no. 12 (2022): 942–45. https://doi.org/10.5281/zenodo.7375512.

Full text
Abstract:
This article discusses the problems faced by the military education system in the modern world, in an attempt to update and introduce innovative technologies that facilitate and improve the very quality of education. We reveal the root causes of the inhibition of the improvement process, show the importance and timeliness of updates and innovations, not only in the presentation of knowledge itself, but also in technologies that help to assimilate and master the acquired knowledge. We propose methods for a gentler introduction of innovations and show the importance of new influences into the mo
APA, Harvard, Vancouver, ISO, and other styles
2

Ahmed, Mohd, M. N. Qureshi, Javed Mallick, and Nabil Ben Kahla. "Selection of Sustainable Supplementary Concrete Materials Using OSM-AHP-TOPSIS Approach." Advances in Materials Science and Engineering 2019 (May 29, 2019): 1–12. http://dx.doi.org/10.1155/2019/2850480.

Full text
Abstract:
Due to resource scarcity, environmental impact, and socioeconomic constraints, sustainable criteria should be given prime importance in the construction industry. The sustainability in concrete can be attained using supplementary materials. The numbers of supplementary concrete materials (SCMs) are available ranging from industries by-products, agro-products, waste product, and newly engineered materials. The selection of the supplementary materials is challenging due to the wide range of environmental, technical, and economic constraints. The paper proposes a decision support framework consid
APA, Harvard, Vancouver, ISO, and other styles
3

Minakov, Ivan A. "Material and technical support of agricultural production: state and prospects." Economy of agricultural and processing enterprises, no. 10 (2021): 28–32. http://dx.doi.org/10.31442/0235-2494-2021-0-10-28-32.

Full text
Abstract:
The article considers the availability of agricultural organizations with material resources and technical means and also factors affecting the formation of the material and technical base, such as the level of development of industries that produce means of production, the solvency of the agricultural sector, prices, import and export of material and technical resources, state support. In the production of some types of products, the role of imported material and technical resources is great. The share of imported seeds and hybrids of sugar beet is 98%, sunflower – 56%, spring rapeseed – 69%,
APA, Harvard, Vancouver, ISO, and other styles
4

Polyanskaya, N. M., A. A. Kolesnyak, O. L. Bryanskaya, L. V. Tushkaeva, and A. N. Gomboeva. "Material and technical support of the agricultural sector: regional aspect." IOP Conference Series: Earth and Environmental Science 677, no. 2 (2021): 022042. http://dx.doi.org/10.1088/1755-1315/677/2/022042.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

V.S., Shapiro, and Paschenko Ya.A. "Material and technical support of the National Police of Ukraine." Legal Horizons 12, no. 25 (2018): 70–73. http://dx.doi.org/10.21272/legalhorizons.2018.i12.p70.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Gurnovich, Tatyana Genrikhovna, Lyubov Vasilievna Agarkova, Lina Dmitrievna Alekseenko, and Tatyana Andreevna Shulzhenko. "Material and technical support of the Krasnodar Territory agricultural enterprises." Proceedings of the Kuban State Agrarian University, no. 95 (2022): 32–36. http://dx.doi.org/10.21515/1999-1703-95-32-36.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Zakharova, Galina, Il'nur Safiullin, Laysana Rakhmatullina, and Elena Ogorodnikova. "MATERIAL AND TECHNICAL SUPPORT OF AGRICULTURE: STATE, PROBLEMS, IMPROVEMENT DIRECTIONS." Vestnik of Kazan State Agrarian University 19, no. 3 (2024): 105–11. http://dx.doi.org/10.12737/2073-0462-2024-105-111.

Full text
Abstract:
One of the determining conditions for competitive domestic agricultural production in foreign markets is the technical and technological modernization of the industry. However, despite the significance of the problem, over the past two decades, a stable trend of reduction in the number of employees in agricultural organizations in Russia has developed for all types of agricultural machinery. The highest rates of reduction in agricultural machinery were observed until 2010, and in subsequent periods the downward trend has significantly decreased. At the same time, it is not entirely correct to
APA, Harvard, Vancouver, ISO, and other styles
8

Hanif, Farzana, Muhammad Imran, Yuang Zhang, et al. "Form-Stable Phase Change Material with Wood-Based Materials as Support." Polymers 15, no. 4 (2023): 942. http://dx.doi.org/10.3390/polym15040942.

Full text
Abstract:
Building shape-stable phase change materials (PCMs) are crucial for their practical applications. Particularly, it is vital to utilize renewable/recyclable biomass media as the support material of form-stable PCMs. In this review article, we summarized the recent developments for building form-stable PCMs consisting of wood as a supporting material, either carbonized wood or wood composites. Moreover, the electrothermal conversion and photothermal conversion of form-stable PCMs based on carbonized wood are also demonstrated. In addition, the current technical problems and future research devel
APA, Harvard, Vancouver, ISO, and other styles
9

Asadullin, Nail, Farit Mukhametgaliev, Fayaz Avkhadiev, Marcel Khismatullin, and Ilgizar Gainutdinov. "Modern trends in technical support of agricultural producers." BIO Web of Conferences 37 (2021): 00016. http://dx.doi.org/10.1051/bioconf/20213700016.

Full text
Abstract:
In modern conditions of the development of an innovative economy, the scientific literature does not reveal the main problems of strengthening the material and technical base of agricultural producers. The agricultural machinery market is practically absent, the issue of formation and functioning remains unresolved. The article is devoted to the assessment of the current state of the provision of agricultural commodity producers with equipment, the development of the tractor and agricultural machine-building industry in Russia, the disclosure of problems, and the search for solutions to the pr
APA, Harvard, Vancouver, ISO, and other styles
10

Мухаметгалиев, Фарит, Farit Mukhametgaliev, Фидания Садриева, and Fidaniya Sadrieva. "PROBLEMS OF TECHNICAL SUPPORT FOR AGRICULTURE OF THE REPUBLIC OF TATARSTAN." Vestnik of Kazan State Agrarian University 12, no. 2 (2017): 121–25. http://dx.doi.org/10.12737/article_59ad0b829e3b49.78457549.

Full text
Abstract:
Technical supply of enterprises of agro-industrial complex is one of the important factors of their industrial and economic development. This factor takes place when processing soils, harvesting and selling agricultural products. So, the crop production directly depends on the technical provision of the village with tractors, combines and other agricultural machines, which make it possible to apply and timely fulfill all agronomic requirements. The main reason of deterioration of the material and technical base is the lack of financial means for farms to purchase machinery and equipment, as we
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Material and technical support"

1

Стрілець, В. Ю. "Забезпечення розвитку малого підприємництва в умовах трансформації національної економіки України". Thesis, Сумський державний університет, 2021. https://essuir.sumdu.edu.ua/handle/123456789/82804.

Full text
Abstract:
У дисертації поглиблено концептуальні засади забезпечення розвитку малого підприємництва в умовах трансформаційної економіки, визначено узгодженість дій держави та бізнесу в цьому напрямі на прикладі України та країн Європейського Союзу. Здійснено кластеризацію регіонів України за рівнем державної підтримки розвитку малого бізнесу та сформульовано регіональні пріоритети державних програм підтримки. Досліджено відповідність діяльності держави міжнародним стандартам підтримки малого бізнесу. Проаналізовано комплаєнс між рівнями податкового тиску та регуляторного втручання держави в діяльність ма
APA, Harvard, Vancouver, ISO, and other styles
2

Vienney, Martine. "Etude d'un procede de retention de biomasse pour le fonctionnement de reacteurs biologiques a l'alimentation continue : son application au traitement anaerobie des effluents industriels." Poitiers, 1988. http://www.theses.fr/1988POIT2339.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

El-Hassan, Osama E. S. "Architectural support for socio-technical systems." Thesis, University of Leicester, 2009. http://hdl.handle.net/2381/7687.

Full text
Abstract:
Software development paradigms are increasingly stretching their scope from the core technical implementation of required functionalities to include processes and people who interact with the implemented systems. Socio-technical systems reflect such a trend as they incorporate the interactions and processes of their social participants, by treating them not as users but as integral players who enact well-defined roles. However, developers of these systems struggle with their complexity and weak architectural support. The challenge is that existing toolboxes for modelling and implementing compl
APA, Harvard, Vancouver, ISO, and other styles
4

López, Arévalo Iván. "Redesign Support Framework for Complex Technical Processes." Doctoral thesis, Universitat Politècnica de Catalunya, 2005. http://hdl.handle.net/10803/6646.

Full text
Abstract:
Els processos industrials requereixen avaluacions periòdiques per a verificar la seva correcta operació en termes tècnics i econòmics. Aquestes avaluacions són necessàries a causa de els canvis en els mercats i en la legislació ambiental i de seguretat. Per a satisfer aquestes demandes és necessari investigar les alternatives dels processos que permetin l'ús òptim dels recursos existents amb la mínima inversió econòmica possible. Aquesta tasca es coneix com redisseny, que és un procediment per a determinar possibles canvis en un procés existent per a millorar-lo pel en alguna mètrica, tal com
APA, Harvard, Vancouver, ISO, and other styles
5

Pugh, Simone N. (Simone Nicole) 1979. "Technical and logistical support for course assessment." Thesis, Massachusetts Institute of Technology, 2003. http://hdl.handle.net/1721.1/29688.

Full text
Abstract:
Thesis (M.Eng. and S.B.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2003.<br>Includes bibliographical references (leaf 31).<br>Course assessment is a valuable tool for improving teaching and learning in a class. As part of the course assessment project being started for 6.042 and several other EECS classes, students took diagnostic entry exams and end-of-term surveys in which they were asked to rate themselves on various objectives of the class. I examined this data along with the students' grades, and performed calculations such as finding co
APA, Harvard, Vancouver, ISO, and other styles
6

Jordan, Page C. "United States Environmental Protection Agency Technical Member of The Engineering Technical Support Center." Miami University / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=miami1544382977066234.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Veronica, Carlsson, and Sjölander Jessica. "Visualisation during Large-Scale Events : Technical Support for Volunteers." Thesis, Blekinge Tekniska Högskola, Avdelningen för för interaktion och systemdesign, 2004. http://urn.kb.se/resolve?urn=urn:nbn:se:bth-2437.

Full text
Abstract:
Our work, which this master thesis is based upon, has been committed to analysing the settings of large-scale events, proposing, and designing an IT-artefact that can be adapted to different contexts depending on the event. In order to give examples of the contexts of which the IT-artefact could be used, it was developed tailored to two temporary large-scale events. Throughout the thesis we have been struggling with the question of how it is possible to facilitate the co-ordination during large-scale events through visualising tasks and resources. Our aim has been that the design proposal shal
APA, Harvard, Vancouver, ISO, and other styles
8

Кузіков, Борис Олегович, Борис Олегович Кузиков та Borys Olehovych Kuzikov. "Организация командной работы в рамках дисциплины Technical Solution Support". Thesis, Сумский государственный университет, 2013. http://essuir.sumdu.edu.ua/handle/123456789/33332.

Full text
Abstract:
Обучение – это процесс передачи не только знаний, но и умений. В рамках дистанционного обучения для передачи умений чаще всего используют тренажеры. Разработка тренажеров является затратной. Другим недостатком тренажеров является преимущественно индивидуальный характер их выполнения. Между тем специалисты считают одной из важнейших составляющих компетентности для многих специальностей именно навыки работы в группе. Это заставляет искать новые средства, подходы и приёмы. При цитировании документа, используйте ссылку http://essuir.sumdu.edu.ua/handle/123456789/33332
APA, Harvard, Vancouver, ISO, and other styles
9

Gutierrez, Charletta Frances. "An investigation of technical support issues influencing user satisfaction." Thesis, University of North Texas, 2000. https://digital.library.unt.edu/ark:/67531/metadc2528/.

Full text
Abstract:
The widespread distribution of personal computers (PCs) throughout organizations has made a substantial impact on information systems. Additionally, the tremendous growth of the Internet has changed the way business is carried out. As the user population evolves into a much more technical and demanding group, their needs are also changing. With this change, Management Information Systems (MIS) departments must develop new ways of providing service and support to the user community. This study investigates the relationship between information systems support structures, support services, ser
APA, Harvard, Vancouver, ISO, and other styles
10

Henriksson, Johannes. "Support systems for material handling in forklifts." Thesis, KTH, Ergonomi, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-145878.

Full text
Abstract:
The world is becoming more and more globalized. The transportation and trading of goods across borders are becoming more frequent. All this is putting greater demands on companies dealing with material handling and distribution of supply. Material handling with forklifts is an area which is associated with risk of accidents.  Statistics from both the US and Europe shows that damages to material and personnel is frequent. A certain area that is in need of improvement is the handling of material on high storages. These storages can be as high as 15m. When stacking and picking pallets at those he
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Material and technical support"

1

Cevelev, Aleksandr. Material resource management. Material and technical support (railway transport). INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/1524028.

Full text
Abstract:
The textbook presents the theoretical and practical issues of the methodology of material and technical support, as well as the developing provisions of the academic disciplines "Material Resource Management" and "Logistics of supply" of railway transport. Such issues as the concept of strategic management, breakthrough transformations in the supply system, quality management, lean manufacturing, process approach, logistics analysis and cybernetics of business technologies, development strategies, management innovations based on the ARIS modeling environment, production inventory management in
APA, Harvard, Vancouver, ISO, and other styles
2

Cevelev, Aleksandr. Material and technical support of railway transport. INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/1417121.

Full text
Abstract:
The textbook covers topical issues of the implementation of the policy of JSC "Russian Railways" in the field of material and technical support of structural divisions of railway transport.&#x0D; Based on the results of theoretical studies of the system management of business processes of material and technical support of railway transport, the diversification of the activities of supply authorities, the concept was formulated and a tree of management goals was developed, as well as the formalization of the existing business processes of the MTO system for the current period was carried out an
APA, Harvard, Vancouver, ISO, and other styles
3

United States. National Aeronautics and Space Administration, ed. Flammability, odor, offgassing, and compatibility requirements and test procedures for materials in environments that support combustion: NASA technical standard. National Aeronautics and Space Administration, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Germany) Deutscher Archivtag (79th 2009 Regensburg. Archive im digitalen Zeitalter: Überlieferung, Erschliessung, Präsentation : 79. Deutscher Architag in Regensburg. Edited by Schmitt Heiner and Gutzmann Ulrike. VdA, Verband deutscher Archivarinnen und Archivare, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Conference, Australian Library and Information Association National TAFE Section. Learning futures and learning resource centres: Support, service or cynicism? : proceedings of the 3rd Conference of the National TAFE Section of the Australian Library and Information Association held in Adelaide, October 1-3, 1991. Auslib Press, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Rodgers, Margaret. Material support. Edited by Eccles Jane 1949- and Visual Arts Centre of Clarington. Visual Arts Centre of Clarington, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Project, Family Planning Service Expansion and Technical Support. Eritrea: Final country report. SEATS Project, JSI/Washington, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Project, Family Planning Service Expansion and Technical Support. Kyrgyzstan--final country report. SEATS Project, JSI/Washington, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Family Planning Service Expansion and Technical Support Project. Uganda: Final country report. SEATS Project, JSI/Washington], 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Family Planning Service Expansion and Technical Support Project. Senegal final report. JSI/SEATS Project, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Material and technical support"

1

Monod, Cécile, Irene Hoesli, Samira Akra, et al. "Non-technical Skills." In Simulation Training for Obstetric Emergencies. Springer Nature Switzerland, 2025. https://doi.org/10.1007/978-3-031-81931-5_2.

Full text
Abstract:
Abstract Effective management of obstetric emergencies requires the coordinated action of a team of caregivers composed of midwives, nurses and medical officers and doctors. Obstetric emergencies are often unforeseeable, and every team taking care of pregnant women should be prepared to respond rapidly and adequately. Obstetric emergencies are very stressful events for the women as well as for the team. Although an excellent command of technical skills is a prerequisite to managing these situations, NTS (non-technical skills) are also essential. NTS are social and cognitive skills that are nec
APA, Harvard, Vancouver, ISO, and other styles
2

Soman, Ranjith K., Dragana Nikolić, and Benjamin Sanchez. "Extended Reality as a Catalyst for Circular Economy Transition in the Built Environment." In Circular Economy and Sustainability. Springer International Publishing, 2024. http://dx.doi.org/10.1007/978-3-031-39675-5_10.

Full text
Abstract:
AbstractExtended reality (XR) technologies refer to mixed reality and virtual reality configurations that augment real or represent fully virtual information in an intuitive and immersive manner, transforming the way we plan, design, construct, and operate built environment assets. XR offers great potential to support and accelerate the transition of built environment practices to a circular economy by supporting decisions based on narrow, slow, close, and regenerate strategies. Narrow strategies use XR to simulate the building process to identify potential issues, reduce material waste, and a
APA, Harvard, Vancouver, ISO, and other styles
3

Schößer, Britta, Arash Alimardani Lavasan, Wiebke Baille, et al. "Face Support, Soil Conditioning and Material Transport in Earth-Pressure-Balance and Hydro Shield Machines." In Interaction Modeling in Mechanized Tunneling. Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-24066-9_4.

Full text
Abstract:
AbstractThe excavation process in mechanised tunnelling consists of various technical components whose interaction enables safe tunnel driving. In reference to the existing geological and hydrogeological conditions, different types of face support principles are applied. In case of fine-grained cohesive soils, the face support is provided by Earth Pressure Balanced (EPB) machines, while the Slurry Shield (SLS) technology is adapted in medium-grained to coarse grained non-cohesive soils even under high groundwater pressure. For both machine techniques, the support medium (the excavated and cond
APA, Harvard, Vancouver, ISO, and other styles
4

Kuhlmann, Judith, Kim Helen Althoff, Anna-Maria Kamin, and Michael Johannfunke. "Sensitize and Qualify University Teachers for Digital Accessibility." In HCI International 2024 Posters. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-61947-2_8.

Full text
Abstract:
AbstractUniversity teachers face new challenges, particularly in the context of digital teaching and learning. However, teachers often encounter obstacles in implementing digital accessibility in their teaching. One of the challenges is disproportionate additional time effort as well as technical and didactic compatibility issues. The SHUFFLE project aims to support teachers with their needs in designing accessible digital teaching concepts through a material package based on the concept of Universal Design for Learning. The package includes checklists, guides, and a knowledge database, which
APA, Harvard, Vancouver, ISO, and other styles
5

Schaffar, Birgit, and Eevi E. Beck. "Means and Meanings of Research Collaboration in the Face of a Suffering Earth: A Landscape of Questions." In Academic Flying and the Means of Communication. Springer Singapore, 2022. http://dx.doi.org/10.1007/978-981-16-4911-0_12.

Full text
Abstract:
AbstractThe Earth is speaking to us in its own language of suffering—rising average temperatures, increasingly extreme weather conditions, mass extinction of species and so on. Academic habits of travelling long distances and/or frequently, as many of us have, affect the Earth and its inhabitants. This chapter argues the need for changing habits not just by developing technical infrastructure but through developing awareness among academics of the issues involved including the dynamics that may be slowing down change. The chapter contributes by discussing the means and meanings of research col
APA, Harvard, Vancouver, ISO, and other styles
6

Kabay, M. E. "Technical Support." In The Expert in the Next Office. CRC Press, 2024. http://dx.doi.org/10.1201/9781003354536-12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Manzella, Daniele, Marco Marsella, Pankaj Jaiswal, Elizabeth Arnaud, and Brian King. "Digital Sequence Information and Plant Genetic Resources: Global Policy Meets Interoperability." In Towards Responsible Plant Data Linkage: Data Challenges for Agricultural Research and Development. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-13276-6_10.

Full text
Abstract:
AbstractPlant genetic resources are source genetic material for conducting research and breeding. The use of this material is subject to international and national regulations on access and benefit-sharing (ABS). With modern genetic technologies generating desired trait and gene function improvement by replicating genetic signatures, ABS must adapt to the new technological reality. As the constituencies of international ABS conventions discuss if and how to extend the application of the conventions to digital sequence information (DSI) derived from source material, the genomics science communi
APA, Harvard, Vancouver, ISO, and other styles
8

Luan, Chen, Pengyu Lou, Hongfu Wang, and Qi Wan. "Ultimate Strength Test and Numerical Simulation Analysis of Typical Cabin Made of a Novel Steel." In Lecture Notes in Mechanical Engineering. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-1876-4_71.

Full text
Abstract:
AbstractA novel steel was proposed to apply to a ship, thereby enabling ships to safely complete their missions. But it is different in the ultimate bearing capacity between the novel material and traditional low-alloy high-carbon steels. There is little research on it. In this paper, the ultimate strength and the destruction mode of the typical cabin made of the novel steel under the hazardous condition are successfully obtained through a four-point bending test. Numerical simulation of the typical cabin at its limit state is verified by the test. Based on the numerical simulation method, the
APA, Harvard, Vancouver, ISO, and other styles
9

Wasserscheid, Peter. "Outlook - The Technical Prospect of Supported Ionic Liquid Materials." In Supported Ionic Liquids. Wiley-VCH Verlag GmbH & Co. KGaA, 2014. http://dx.doi.org/10.1002/9783527654789.ch23.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

MacWillson, Alastair C. "Technical Support Requirements." In Hostage-Taking Terrorism. Palgrave Macmillan UK, 1992. http://dx.doi.org/10.1007/978-1-349-12477-0_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Material and technical support"

1

Kluchnikova, O. V., and O. A. Fil’. "The dynamics of the technical monitoring and scientific and technical support for bridge construction." In SECOND INTERNATIONAL CONFERENCE ON MATERIAL SCIENCE, SMART STRUCTURES AND APPLICATIONS: ICMSS-2019. AIP Publishing, 2019. http://dx.doi.org/10.1063/1.5138472.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Zaalishvili, V. B., R. P. Kulumbegov, L. I. Kortiev, A. L. Kortiev, and E. A. Margiev. "Avalanche-proof constructions dynamics and their scientific-technical support." In SECOND INTERNATIONAL CONFERENCE ON MATERIAL SCIENCE, SMART STRUCTURES AND APPLICATIONS: ICMSS-2019. AIP Publishing, 2019. http://dx.doi.org/10.1063/1.5138470.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Brodskiy, V. I. "Organization of material and technical support for the construction of large-panel buildings." In PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON ENGINEERING RESEARCH 2021 (ICER 2021), MOSCOW, RUSSIA. AIP Publishing, 2022. http://dx.doi.org/10.1063/5.0099129.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Valeev, S., N. Kondratyeva, and B. Gotlib. "Distributed technical safety systems and application of information redundancy for decision support." In 2ND INTERNATIONAL CONFERENCE & EXPOSITION ON MECHANICAL, MATERIAL, AND MANUFACTURING TECHNOLOGY (ICE3MT 2022). AIP Publishing, 2023. http://dx.doi.org/10.1063/5.0132349.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Digonta, H. M. Dilshad Alam, Anand Balu Nellippallil, and Mathew Baby. "Multilevel Decision Support Framework for the Simultaneous Design Exploration of Material Structures and Processes." In ASME 2024 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2024. http://dx.doi.org/10.1115/detc2024-146330.

Full text
Abstract:
Abstract Traditional manufacturing, such as steel manufacturing, involves a series of processes to realize the final product. The properties and performance of the final product depend on the material processing history and the microstructure generated at each of the processes. Realizing target product performance requires the simultaneous design exploration of the material microstructure and processing, taking into account the multilevel interactions between the material, product, and manufacturing processes. This demands the capability to co-design, which involves sharing a ranged set of sol
APA, Harvard, Vancouver, ISO, and other styles
6

Kozak, S. S. "The scientific activity of the VNIIPP Laboratory for sanitary hygienic assessment of raw material and products." In SCIENTIFIC AND TECHNICAL SUPPORT EFFICIENCY AND QUALITY PRODUCTION OF AGRICULTURAL PRODUCTS. VNIIPP, 2019. http://dx.doi.org/10.30975/978-5-9909889-2-7-2019-1-1-115-120.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Orlov, I. A., B. N. Fedorencko, and V. I. Bogush. "Study of sonochemical effects influence at soluble matters extraction from grain raw material in beer production." In SCIENTIFIC AND TECHNICAL SUPPORT EFFICIENCY AND QUALITY PRODUCTION OF AGRICULTURAL PRODUCTS. VNIIPP, 2019. http://dx.doi.org/10.30975/978-5-9909889-2-7-2019-1-1-195-199.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Liublin, V. D. "Material and technical support of the activities of subjects in the field of information relations." In INFORMATION TECHNOLOGIES AND MANAGEMENT IN HIGHER EDUCATION AND SCIENCES. PART 2. Baltija Publishing, 2022. http://dx.doi.org/10.30525/978-9934-26-277-7-148.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Televinov, N. "IMPROVEMENT OF THE MATERIAL AND TECHNICAL SUPPORT MANAGEMENT SYSTEM FOR METAL STRUCTURES OF «JSC NIPIGAS»." In Digital transformation in the economy of the transport complex. INFRA-M Academic Publishing LLC., 2025. https://doi.org/10.12737/conferencearticle_678a0d29db1363.60048672.

Full text
Abstract:
This work is devoted to improving the management system of material and technical support of metal structures of JSC NIPIGAZ. During the research, the current processes of material resource management are analyzed, problematic aspects are identified and solutions for optimizing the management system are proposed. The research is aimed at improving the efficiency of the use of material and technical resources, improving production processes and reducing costs. The results and recommendations of the work can be used to improve the performance of management systems in other companies with similar
APA, Harvard, Vancouver, ISO, and other styles
10

Semyonova, A. A., T. G. Kuznetsova, and A. A. Motovilina. "Micro structural investigations of raw sausages prepared with usage of modern method of meat raw material milling." In SCIENTIFIC AND TECHNICAL SUPPORT EFFICIENCY AND QUALITY PRODUCTION OF AGRICULTURAL PRODUCTS. VNIIPP, 2019. http://dx.doi.org/10.30975/978-5-9909889-2-7-2019-1-1-219-225.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Material and technical support"

1

Casey, C., and B. A. Heath. Material Not Categorized As Waste (MNCAW) data report. Radioactive Waste Technical Support Program. Office of Scientific and Technical Information (OSTI), 1992. http://dx.doi.org/10.2172/10134825.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

McKinnon, Mark, and Daniel Madryzkowski. Literature Review to Support the Development of a Database of Contemporary Material Properties for Fire Investigation Analysis. UL Firefighter Safety Research Institute, 2020. http://dx.doi.org/10.54206/102376/wmah2173.

Full text
Abstract:
The NIJ Technology Working Group’s Operational Requirements (TWG ORs) for Fire and Arson Investigation have included several scientific research needs that require knowledge of the thermophysical properties of materials that are common in the built environment, and therefore likely to be involved in a fire scene. The specific areas of research include: adequate materials property data inputs for accurate computer models, understanding the effect of materials properties on the development and interpretation of fire patterns, and evaluation of incident heat flux profiles to walls and neighboring
APA, Harvard, Vancouver, ISO, and other styles
3

McKinnon, Mark, Craig Weinschenk, and Daniel Madrzykowski. Materials and Products Database Technical Reference Guide. Fire Safety Research Institute, UL Research Institutes, 2023. http://dx.doi.org/10.54206/102376/rnnp3809.

Full text
Abstract:
For the past several years, the NIJ Technology Working Group’s Operational Requirements for Fire and Arson Investigation have included several scientific research needs that require improved knowledge of properties of materials that are common in the built environment, and therefore likely to be involved in a fire scene. The specific areas of research include: adequate materials data inputs for accurate computer models, understanding the effect of materials properties on the development and interpretation of fire patterns, and evaluation of incident heat flux profiles to walls and neighboring
APA, Harvard, Vancouver, ISO, and other styles
4

Cross, John A. Support Materials for the Software Technical Review Process. Defense Technical Information Center, 1988. http://dx.doi.org/10.21236/ada236122.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Sims, Jerre G., and David W. Moore. Risk of Pore Water Ammonia Toxicity in Dredged Material Bioassays. Dredging Operations Technical Support Program. Defense Technical Information Center, 1995. http://dx.doi.org/10.21236/ada303532.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Sturgis, Thomas C. Dredging Operations Technical Support Program: Guidance for Contracting Biological and Chemical Evaluations of Dredged Material. Defense Technical Information Center, 1990. http://dx.doi.org/10.21236/ada227914.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Averett, Daniel E., Michael R. Palermo, and Roy Wade. Dredging Operations Technical Support Program: Verification of Procedures for Designing Dredged Material Containment Areas for Solids Retention. Defense Technical Information Center, 1988. http://dx.doi.org/10.21236/ada191080.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Fredette, Thomas J., David A. Nelson, James E. Clausner, and Fred J. Anders. Dredging Operations Technical Support Program. Guidelines for Physical and Biological Monitoring of Aquatic Dredged Material Disposal Sites. Defense Technical Information Center, 1990. http://dx.doi.org/10.21236/ada227138.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Hughes, Scott. TEAMER Technical Support for Aquantis (Materials): Cooperative Research and Development Final Report, CRADA Number CRD-21-17762. Office of Scientific and Technical Information (OSTI), 2024. http://dx.doi.org/10.2172/2345907.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Wang. L51841 Compendium of Pipeline Girth Weld ECA Methodologies to Support Revisions to Existing Code Practices. Pipeline Research Council International, Inc. (PRCI), 2001. http://dx.doi.org/10.55274/r0010268.

Full text
Abstract:
Significant progress has been made since the mid-1980's in understanding the role of weld defects in pipeline integrity. Unfortunately, this new knowledge has not been incorporated into Appendix A. More significantly, new line pipe materials and welding processes since the mid-1980's have created conditions that were not anticipated in the original code, and that can lead to unsafe designs. This project was commissioned to produce a document to provide the technical basis for the revisions of Appendix A. The technical and historical background of several internationally recognized girth weld E
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!