Academic literature on the topic 'Materials at high temperatures'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Materials at high temperatures.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Materials at high temperatures"

1

Gurley, Ralph R., and W. P. Sinclair. "PIPE COVERING MATERIALS FOR HIGH TEMPERATURES." Journal of the American Society for Naval Engineers 47, no. 2 (2009): 247–56. http://dx.doi.org/10.1111/j.1559-3584.1935.tb05605.x.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Mustafayeva, F. A., and N. T. Kahramanov. "THERMOMECHANICAL PROPERTIES OF COMPOSITE MATERIALS BASED ON MIXTURES OF HIGH AND LOW DENSITY POLYETHYLENES." Chemical Problems 21, no. 1 (2023): 41–47. http://dx.doi.org/10.32737/2221-8688-2023-1-41-47.

Full text
Abstract:
The results of the research into the influence of polymer components ratio - high density polyethylene and low density polyethylene, into the regularity of changes in thermomechanical properties are presented. The deformation was measured at varying temperatures and at a constant load of 0.5 kg/cm2 . The concentration of low density polyethylene varied from 10 to 100 wt%. Depending upon the test temperature, two physical states were recorded: solid and viscous-flow. It found that as the concentration of low-density polyethylene in the composition of the polymer mixture rose, the transition tem
APA, Harvard, Vancouver, ISO, and other styles
3

Phua, Eric Jian Rong, Ming Liu, Riko I. Made, et al. "Novel encapsulation materials for High Pressure-High Temperature (HPHT) applications." Additional Conferences (Device Packaging, HiTEC, HiTEN, and CICMT) 2013, HITEN (2013): 000268–74. http://dx.doi.org/10.4071/hiten-wa19.

Full text
Abstract:
A modified thermoset polymer resin (PR) is evaluated as a form of alternative packaging material to traditional epoxy. It is understood that the thermoset cross-links to a higher degree at high temperature. Hence, its mechanical properties can be improved by changing treatment duration and temperature, rendering the material mechanically stronger for application temperatures beyond 300°C. Material strength was evaluated through a modified compressive testing setup which shows neat PR is comparable to epoxy. Concurrently, adhesion to silicon die and ceramic substrate were evaluated by means of
APA, Harvard, Vancouver, ISO, and other styles
4

Yamanoi, Yuta, and Satoru Nakashima. "In situ High-Temperature Visible Microspectroscopy for Volcanic Materials." Applied Spectroscopy 59, no. 11 (2005): 1415–19. http://dx.doi.org/10.1366/000370205774783205.

Full text
Abstract:
In situ high-temperature visible microspectroscopy has been developed in order to study color change kinetics of volcanic materials. Olivine thin sections put on a synthetic alumina plate are heated on a heating stage at 600–800 °C under a visible microspectroscope. Changes in visible absorption spectra are monitored every 60 s for 5 hours. The obtained high-temperature visible spectra showed a gradual increase with time in absorbance in the shorter wavelength region (400–600 nm). The 430 nm absorbance (ligand field transition of Fe3+) increased more with time at higher temperatures. Assuming
APA, Harvard, Vancouver, ISO, and other styles
5

Hofmann, Peter, Siegfried J. L. Hagen, Gerhard Schanz, and Alfred Skokan. "Reactor Core Materials Interactions at Very High Temperatures." Nuclear Technology 87, no. 1 (1989): 327–33. http://dx.doi.org/10.13182/nt-tmi2-146.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Sharpe, William N. "Tensile Testing of MEMS Materials at High Temperatures." Applied Mechanics and Materials 3-4 (August 2006): 59–64. http://dx.doi.org/10.4028/www.scientific.net/amm.3-4.59.

Full text
Abstract:
This paper presents three kinds of high-temperature test methods for three different materials along with the results. Resistively heated polysilicon film 3.5 micron thick shows ductile behavior at 500°C. Resistively heated nickel 200 microns thick shows decreasing strength at 400°C. Furnace heated silicon carbide 200 microns thick maintains its strength at 1000°C. Strain is measured by laser-based interferometry in the first two cases to obtain complete stress-strain curves, while force-displacement is measured in the third case.
APA, Harvard, Vancouver, ISO, and other styles
7

Chiang, H. P., P. T. Leung, and W. S. Tse. "Optical properties of composite materials at high temperatures." Solid State Communications 101, no. 1 (1997): 45–50. http://dx.doi.org/10.1016/s0038-1098(96)00558-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Xotta, G., G. Mazzucco, V. A. Salomoni, C. E. Majorana, and K. J. Willam. "Composite behavior of concrete materials under high temperatures." International Journal of Solids and Structures 64-65 (July 2015): 86–99. http://dx.doi.org/10.1016/j.ijsolstr.2015.03.016.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Fang, Zheng-Hua. "Thermal expansion of ionic materials at high temperatures." Journal of Applied Physics 102, no. 1 (2007): 013523. http://dx.doi.org/10.1063/1.2752143.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Alisin, V. V., and M. N. Roshchin. "Tribology of carbon-containing materials at high temperatures." Journal of Physics: Conference Series 1399 (December 2019): 044034. http://dx.doi.org/10.1088/1742-6596/1399/4/044034.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Materials at high temperatures"

1

Dike, Shweta Srikant. "Dynamic Deformation of Materials at Elevated Temperatures." Cleveland, Ohio : Case Western Reserve University, 2010. http://rave.ohiolink.edu/etdc/view?acc_num=case1268337193.

Full text
Abstract:
Thesis (Master of Sciences (Engineering))--Case Western Reserve University, 2010<br>Department of EMC - Mechanical Engineering Title from PDF (viewed on 2010-05-25) Includes abstract Includes bibliographical references and appendices Available online via the OhioLINK ETD Center
APA, Harvard, Vancouver, ISO, and other styles
2

Hedayat, Assem Reda. "Hot pressing of trichromium dicarbide." Thesis, Georgia Institute of Technology, 1985. http://hdl.handle.net/1853/11223.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Fang, Xiaojun. "Sapphire fiber based high temperature extensometer." Master's thesis, This resource online, 1994. http://scholar.lib.vt.edu/theses/available/etd-01262010-020150/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Kaylor, Rosann Matthews. "The high-temperature, alkaline degradation of a new cellulose model compound." Thesis, Georgia Institute of Technology, 1994. http://hdl.handle.net/1853/27286.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Sheffield, Randolph J. "High heat flux spray cooling." Diss., Georgia Institute of Technology, 1994. http://hdl.handle.net/1853/17881.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Touryan, Lara A. "Permeability of millimeter sized consolidated hollow ceramic spheres." Thesis, Georgia Institute of Technology, 1992. http://hdl.handle.net/1853/16873.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Scheunert, G. "High magnetic moment materials for thin-film applications at cryogenic temperatures." Thesis, Queen's University Belfast, 2014. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.680511.

Full text
Abstract:
The possibility of using heavy rare earth metals and some of their alloys as pole piece materials for nanoscale electromagnets as in magnetic recording devices (hard drive disks) at cryogenic temperatures was evaluated. To set the frame an extensive literature review on high-moment materials and concepts is presented. Thin films of Permendur (Fe6%Co35 alloys), gadolinium (Gd), dysprosium (Dy), Dy50Gd50 binary alloys, terbium (Tb), holmium (Ho), DyRh binary alloys, and DyRhX (X = Fe, Ni, Co, Gd) ternary alloys were magnetron-sputtered and characterised for their chemical and crystal structure.
APA, Harvard, Vancouver, ISO, and other styles
8

Denney, D. Lawrence. "High heat flux cooling via A monodisperse controllable spray." Thesis, Georgia Institute of Technology, 1996. http://hdl.handle.net/1853/17808.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Bateman, Joseph A. "High temperature fracture toughness of Cr-Mo-V welds." Thesis, Georgia Institute of Technology, 1995. http://hdl.handle.net/1853/15025.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

English, Jennifer M. "Wireless micromachined ceramic pressure sensors for high termperature environments." Diss., Georgia Institute of Technology, 2000. http://hdl.handle.net/1853/15790.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Materials at high temperatures"

1

International Conference on High Temperatures--Chemistry of Inorganic Materials (6th : 1989 : National Institute of Standards and Technology (U.S.)), ed. Materials chemistry at high temperatures. Humana Press, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Hastie, John W., ed. Materials Chemistry at High Temperatures. Humana Press, 1990. http://dx.doi.org/10.1007/978-1-4612-0481-7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Eustathopoulos, Nicolas. Wettability at high temperatures. Pergamon, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Price, David L. High-temperature levitated materials. Cambridge University Press, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

M, McLean, Elliott I, Institute of Metals. Materials Science Committee., Institute of Metals. Materials Engineering Committee., and Institute of Metals. Continuing Education Committee., eds. Characterisation of high-temperature materials. Institute of Metals, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Arthur, Park, Peters L, and Lewis Research Center, eds. Material parameter measurements at high temperatures. National Aeronautics and Space Administration, Lewis Research Center, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

International, Conference on High Temperature Materials Chemistry (9th 1997 University Park Pa ). Proceedings of the Ninth International Conference on High Temperature Materials Chemistry. The Society, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

1938-, Ohtani Ryuichi, Ohnami Masateru 1931-, and Inoue Tatsuo 1939-, eds. High temperature creep-fatigue. Elsevier Applied Science, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Dimitrienko, Yuriy I. Thermomechanics of Composites under High Temperatures. Springer Netherlands, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

M, Willander, and Hartnagel Hans 1934-, eds. High temperature electronics. Chapman & Hall, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Materials at high temperatures"

1

Riedel, Hermann. "Nonlinear Viscous Materials and the Use of C*." In Fracture at High Temperatures. Springer Berlin Heidelberg, 1987. http://dx.doi.org/10.1007/978-3-642-82961-1_20.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Riedel, Hermann. "Elastic/Nonlinear Viscous Materials. Applicability of KI, and C*." In Fracture at High Temperatures. Springer Berlin Heidelberg, 1987. http://dx.doi.org/10.1007/978-3-642-82961-1_23.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Hensel, F. "Fluid Metals at High Temperatures." In Amorphous and Liquid Materials. Springer Netherlands, 1987. http://dx.doi.org/10.1007/978-94-009-3505-1_28.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Kim, Kee Hoon, Sae Hwan Chun, Yi Sheng Chai, et al. "Nanosession: Multiferroics - High Transition Temperatures." In Frontiers in Electronic Materials. Wiley-VCH Verlag GmbH & Co. KGaA, 2013. http://dx.doi.org/10.1002/9783527667703.ch54.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Dimitrienko, Yuriy I. "Textile Ablative Composite Materials." In Thermomechanics of Composites under High Temperatures. Springer Netherlands, 1999. http://dx.doi.org/10.1007/978-94-015-9183-6_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Anderson, Richard J. M., and John C. Hamilton. "Optical Second Harmonic Generation as a Probe of Properties and Processes at Surfaces and Interfaces." In Materials Chemistry at High Temperatures. Humana Press, 1990. http://dx.doi.org/10.1007/978-1-4612-0481-7_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Camus, Patrick P. "Atom Probe Field-Ion Microscopy Applications." In Materials Chemistry at High Temperatures. Humana Press, 1990. http://dx.doi.org/10.1007/978-1-4612-0481-7_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Krishnan, S., G. P. Hansen, R. H. Hauge, and J. L. Margrave. "Emissivities and Optical Constants of Electromagnetically Levitated Liquid Metals as Functions of Temperature and Wavelength." In Materials Chemistry at High Temperatures. Humana Press, 1990. http://dx.doi.org/10.1007/978-1-4612-0481-7_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Rudnyi, E. B., M. V. Korobov, O. M. Vovk, E. A. Kaibicheva, and L. N. Sidorov. "Ion Equilibria." In Materials Chemistry at High Temperatures. Humana Press, 1990. http://dx.doi.org/10.1007/978-1-4612-0481-7_12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Frisch, Margaret A., and Edward A. Giess. "Thermal Desorption Kinetics of Water from Glass Powders Studied by Knudsen Effusion Mass Spectroscopy." In Materials Chemistry at High Temperatures. Humana Press, 1990. http://dx.doi.org/10.1007/978-1-4612-0481-7_13.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Materials at high temperatures"

1

Clark, Timothy E., Selee Chang, and Jung Hyun Oh. "Polymer cladding materials under high temperatures." In 2011 IEEE Avionics, Fiber- Optics and Photonics Technology Conference (AVFOP). IEEE, 2011. http://dx.doi.org/10.1109/avfop.2011.6082136.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Smith, Kevin H., Benjamin L. Ipson, Tyson L. Lowder, Aaron R. Hawkins, Richard H. Selfridge, and Stephen M. Schultz. "Etched in-fiber Bragg gratings for temperature sensing at high temperatures." In Smart Structures and Materials, edited by Eric Udd and Daniele Inaudi. SPIE, 2005. http://dx.doi.org/10.1117/12.600215.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Ennass, kamal, benjamin Remy, vincent Schick, and johann Meulemans. "Temperature measurements of opaque materials at high temperatures using multi-spectral methods." In 16th Quantitative InfraRed Thermography conference. QIRT Council, 2022. http://dx.doi.org/10.21611/qirt.2022.3040.

Full text
Abstract:
Precise and accurate temperature measurements during material manufacturing processes are crucial for obtaining the desired properties. In the context of this study, the metrological tool used for the measurements will be the multi-spectral infrared thermography. This non-intrusive tool is coupled with the Particle Swarm Optimization algorithm (PSO algorithm) for the simultaneous estimation of temperature and spectral emissivity variations in the case of opaque bodies by using an analytical model based on finite elements parametrization.
APA, Harvard, Vancouver, ISO, and other styles
4

Clark, Timothy E., Selee Chang, SeungJo Kwak, and Jung Hyun Oh. "Behavior of polymer cladding materials under extremely high temperatures." In SPIE BiOS. SPIE, 2012. http://dx.doi.org/10.1117/12.909306.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Dessard, V., J. P. Eggermont, and D. Flandre. "Thin-film SOI n-MOSFET low-frequency noise measurements at elevated temperatures." In 1998 High-Temperature Electronic Materials, Devices and Sensors Conference. IEEE, 1998. http://dx.doi.org/10.1109/htemds.1998.730657.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

McManus, Hugh. "Stress and damage in polymer matrix composite materials due to material degradation at high temperatures." In 35th Structures, Structural Dynamics, and Materials Conference. American Institute of Aeronautics and Astronautics, 1994. http://dx.doi.org/10.2514/6.1994-1395.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Katogi, H., K. Takemura, and R. Suzuki. "Tensile properties of surface treated jute fibers under high environmental (ambient) temperatures." In MATERIALS CHARACTERISATION 2015. WIT Press, 2015. http://dx.doi.org/10.2495/mc150041.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

KORZHUEV, M. A., and I. V. KATIN. "NANO-LIKE EFFECTS IN CRYSTALLINE THERMOELECTRIC MATERIALS AT HIGH TEMPERATURES." In Proceedings of International Conference Nanomeeting – 2013. WORLD SCIENTIFIC, 2013. http://dx.doi.org/10.1142/9789814460187_0139.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Marriott, J. B., J. O. Ward, and M. van de Voorde. "Materials for High Temperature Metallic Heat Exchangers." In Advanced Course in High Temperature Equipment. Begellhouse, 1986. http://dx.doi.org/10.1615/ichmt.1986.advcoursehightempeq.130.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Cabet, Celine, Fabien Rouillard, Gouenou Girardin, and Martine Blat. "Corrosion Issues of HTR Structural Metallic Materials." In Fourth International Topical Meeting on High Temperature Reactor Technology. ASMEDC, 2008. http://dx.doi.org/10.1115/htr2008-58152.

Full text
Abstract:
Cooling helium of HTRs is expected to contain a low level of impurities: oxidizing gasses and carbon-bearing species. Reference structural materials for pipes and heat exchangers are chromia-former nickel base alloys — typically alloys 617 and 230 — and, as is generally the case in any high temperature process, their long term corrosion resistance relies on the growth of a surface chromium-oxide that can act as a barrier against corrosive species. This implies that the HTR environment must allow for oxidation of these alloys to occur, while it remains not too oxidizing against in-core graphite
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Materials at high temperatures"

1

Payer. L51904 High Temperature Performance of Existing Pipeline Coatings. Pipeline Research Council International, Inc. (PRCI), 2003. http://dx.doi.org/10.55274/r0011155.

Full text
Abstract:
The objective was to establish the performance of commonly used pipeline-coating materials over the temperature range from 120F to 200F (49C to 93C). The results are useful for the prediction of in-service limitations, integrity and time-to-failure of coatings. Results at higher temperature are directly relevant to pipelines operating at higher temperatures. In addition, elevated temperature has been an accelerating factor used to predict performance at longer times at ambient temperature.
APA, Harvard, Vancouver, ISO, and other styles
2

Keer, Leon M., K. T. Faber, B. Moran, and J. Weertman. High Temperature Heterogeneous Materials. Defense Technical Information Center, 1994. http://dx.doi.org/10.21236/ada329853.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Raj, Rishi. High Temperature Materials Processing Science. Defense Technical Information Center, 1987. http://dx.doi.org/10.21236/ada182904.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Sellmyer, D. J., S. S. Jaswal, D. L. Leslie-Pelecky, and Y. Liu. Advanced High Temperature Magnetic Materials. Defense Technical Information Center, 2001. http://dx.doi.org/10.21236/ada387482.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Upsadhya, Kameleshwar. Materials for High Temperature Applications. Defense Technical Information Center, 2001. http://dx.doi.org/10.21236/ada388213.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Lew Lommers and George Honma. NGNP High Temperature Materials White Paper. Office of Scientific and Technical Information (OSTI), 2012. http://dx.doi.org/10.2172/1055953.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Hemrick, James Gordon, Jeffrey D. Smith, Kelley O'Hara, Angela Rodrigues-Schroer, and Colavito. NOVEL REFRACTORY MATERIALS FOR HIGH ALKALI, HIGH TEMPERATURE ENVIRONMENTS. Office of Scientific and Technical Information (OSTI), 2012. http://dx.doi.org/10.2172/1049095.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Hemrick, James Gordon. NOVEL REFRACTORY MATERIALS FOR HIGH ALKALI, HIGH TEMPERATURE ENVIRONMENTS. Office of Scientific and Technical Information (OSTI), 2011. http://dx.doi.org/10.2172/1024313.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Hemrick, J. G., and R. Griffin. NOvel Refractory Materials for High Alkali, High Temperature Environments. Office of Scientific and Technical Information (OSTI), 2011. http://dx.doi.org/10.2172/1024343.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Nancy Lybeck. High Temperature Materials Interim Data Qualification Report. Office of Scientific and Technical Information (OSTI), 2010. http://dx.doi.org/10.2172/991916.

Full text
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!