Books on the topic 'Matrix interface'

Spragg, CJ, and LT Drzal, eds. Fiber, Matrix, and Interface Properties. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 1996. http://dx.doi.org/10.1520/stp1290-eb.

Adams, Donald Frederick. Polymer matrix and graphite fiber interface study. Moffett Field, Calif: National Aeronautics and Space Administration, Ames Research Center, 1985.

Naik, Rajiv A. Fracture mechanics analysis for various fiber/matrix interface loadings. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1991.

Naik, Rajiv A. Determination of fiber-matrix interface failure parameters from off-axis tests. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1993.

Naik, Rajiv A. Determination of fiber-matrix interface failure parameters from off-axis tests. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1993.

Naik, Rajiv A. Determination of fiber-matrix interface failure parameters from off-axis tests. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1993.

Naik, Rajiv A. Determination of fiber-matrix interface failure parameters from off-axis tests. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1993.

Naik, Rajiv A. Closed-form analysis of fiber-matrix interface stresses under thermo-mechanical loadings. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1992.

Naik, Rajiv A. Closed-form analysis of fiber-matrix interface stresses under thermo-mechanical loadings. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1992.

Funn, John V. Creep behavior of the interface region in continuous fiber reinforced metal-matrix composites. Monterey, Calif: Naval Postgraduate School, 1997.

JFCC International Workshop on Fine Ceramics '98 (1998 Nagoya, Japan). Ceramic material systems with composite structures: Towards optimum interface control and design. Westerville, Ohio: American Ceramic Society, 1998.

Bansal, Narottam P. Effects of interface modification on mechanical behavior of hi-nicalon fiber-reinforced celsian matrix composites. Cleveland, Ohio: Lewis Research Center, 1997.

Crews, John H. An analysis of fiber-matrix interface failure stresses for a range of ply stress states. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1993.

Ormston, Nicholas J. Design of a fast serial interface for an on-chip active matrix liquid crystal display. Manchester: UMIST, 1996.

Crews, John H. An analysis of fiber-matrix interface failure stresses for a range of ply stress states. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1993.

Bansal, Narottam P. Effects of fiber/matrix interface and its composition on mechanical properties of Hi-Nicalon/celsian composites. [Cleveland, Ohio]: National Aeronautics and Space Administration, Glenn Research Center, 1999.

Bansal, Narottam P. Effects of fiber/matrix interface and its composition on mechanical properties of Hi-Nicalon/celsian composites. [Cleveland, Ohio]: National Aeronautics and Space Administration, Glenn Research Center, 1999.

Bansal, Narottam P. Effects of fiber/matrix interface and its composition on mechanical properties of Hi-Nicalon/celsian composites. [Cleveland, Ohio]: National Aeronautics and Space Administration, Glenn Research Center, 1999.

International Conference on Composite Interfaces (2nd 1988 Cleveland, Ohio). Interfaces in polymer, ceramic and metal matrix composites. Edited by Ishida Hatsuo. London: Elsevier, 1988.

Interfacce della materia: Esperienze progettuali, sedie e comportamenti = The interfaces of material : design experiments, chairs and behavior. Milano: Domus Academy, 1991.

Murthy, Pappu L. N. Probabilistic micromechanics and macromechanics for ceramic matrix composites. [Washington, D.C.]: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1997.

Li, Yinghai. EDS in TEM: (1) artefacts (2) application to SiC and ceramic matrix interfaces. Birmingham: University of Birmingham, 1993.

Bansal, Narottam P. Strong and tough Hi-Nicalon fiber-reinforced celsian matrix composites. [Cleveland, Ohio]: National Aeronautics and Space Administration, Lewis Research Center, 1997.

Bansal, Narottam P. Strong and tough Hi-Nicalon fiber-reinforced celsian matrix composites. [Cleveland, Ohio]: National Aeronautics and Space Administration, Lewis Research Center, 1997.

Bansal, Narottam P. Strong and tough Hi-Nicalon fiber-reinforced celsian matrix composites. [Cleveland, Ohio]: National Aeronautics and Space Administration, Lewis Research Center, 1997.

Bansal, Narottam P. Strong and tough hi-nicalon fiber-reinforced celsian matrix composites. Cleveland, Ohio: Lewis Research Center, 1997.

Asthana, R. Influence of CR and W alloying on the fiber-matrix interfacial shear strength in cast and directionally solidified sapphire NiAI composites. Washington, DC: National Aeronautics and Space Administration, 1995.

Hatsuo, Ishida, ed. Interfaces in polymer, ceramic, and metal matrix composites: Proceedings of the Second International Conference on Composite Interfaces (ICCI-II) held June 13-17, 1988, in Cleveland, Ohio, USA. New York: Elsevier, 1988.

Dickerson, R. M. Microstructures of BN/SiC coatings on Nicalon fibers. [Washington, DC: National Aeronautics and Space Administration, 1995.

Bansal, Narottam P. CVD silicon carbide monofilament reinforced SrO-Al₂O₃-2SiO₂ (SAS) glass-ceramic composites. [Washington, D.C.]: National Aeronautics and Space Administration, 1995.

Madhukar, Madhu S. Thermo-oxidative stability of graphite/PMR-15 composites: Effect of fiber surface modification on composite shear properties. Cleveland, Ohio: Lewis Research Center, 1994.

1959-, Spragg Christopher J., Drzal Lawrence T, ASTM Committee D-30 on High Modulus Fibers and Their Composites., and Symposium on Fiber, Matrix, and Interface Properties (1994 : Phoenix, Ariz.), eds. Fiber, matrix, and interface properties. West Conshohocken, Penn: ASTM, 1996.

Li, L. Interface of Ceramic-Matrix Composites Cloth. Wiley & Sons, Limited, John, 2020.

V, Pepper Steven, and United States. National Aeronautics and Space Administration., eds. Auger analysis of a fiber/matrix interface in a ceramic matrix composite. [Washington, D.C.]: National Aeronautics and Space Administration, 1988.

S, Jacobson Nathan, and United States. National Aeronautics and Space Administration., eds. Chemical status of the fiber coating/matrix interface in silicon-based ceramic matrix composites. Washington, DC: National Aeronautics and Space Administration, 1995.

S, Jacobson Nathan, and United States. National Aeronautics and Space Administration., eds. Chemical stability of the fiber coating/matrix interface in silicon-based ceramic matrix composites. Washington, DC: National Aeronautics and Space Administration, 1995.

1939-, Vigo Tyrone L., and Kinzig Barbara J, eds. Composite applications: The role of matrix, fiber, and interface. New York, N.Y: VCH, 1992.

(Editor), Tyrone Vigo, and Barabara Kinzig (Editor), eds. Composite Applications: The Role of Matrix, Fiber, and Interface. Wiley-VCH, 1992.

A, Leckie Frederick, and United States. National Aeronautics and Space Administration., eds. Elasto-plastic analysis of interface layers for fiber reinforced metal matrix composites. [Washington, DC]: National Aeronautics and Space Administration, 1991.

H, Crews John, and Langley Research Center, eds. Closed-form analysis of fiber-matrix interface stresses under thermo-mechanical loadings. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1992.

Elasto-plastic analysis of interface layers for fiber reinforced metal matrix composites. [Washington, DC]: National Aeronautics and Space Administration, 1991.

Creep Behavior of the Interface Region in Continuous Fiber Reinforced Metal-Matrix Composites. Storming Media, 1997.

A, Leckie Frederick, and Lewis Research Center, eds. Reduction of thermal stresses in continuous fiber reinforced metal matrix composites with interface layers. [Cleveland, Ohio?]: National Aeronautics and Space Administration, Lewis Research Center, 1990.

A, Naik Rajiv, Lubowinski S. J, and Langley Research Center, eds. An analysis of fiber-matrix interface failure stresses for a range of ply stress states. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1993.

(Editor), Nobuo Takeda, Laurel M. Sheppard (Editor), and Jun-Ichi Kon (Editor), eds. Ceramic Material Systems With Composite Structures: Towards Optimum Interface Control and Design (Ceramic Transactions, Volume 99). American Ceramic Society, 1998.

George C. Marshall Space Flight Center., ed. Composite processing development to improve interlaminar strength using ply interface particles: (Center Director's discretionary fund final report, no. 93-13). MSFC, Ala: National Aeronautics and Space Administration, George C. Marshall Space Flight Center, 1995.

(Editor), A. Dhingra, and S. Fishman (Editor), eds. Interfaces in Metal Matrix Composites. ASM International, 1987.

Metal Matrix Composites: Processing and Interfaces. Elsevier, 1991. http://dx.doi.org/10.1016/b978-0-12-341832-6.x5001-4.

Díaz, Francisco Javier, Ivana Harari, and Ana Paola Amadeo. Guía de recomendaciones para diseño de software centrado en el usuario. Editorial de la Universidad Nacional de La Plata (EDULP), 2013. http://dx.doi.org/10.35537/10915/32172.

Ishida, Hatsuo. Interfaces in Polymers, Ceramic and Metal Matrix Composites. Elsevier, 1988.