Log in

Relevant bibliographies by topics / Maximum power / Journal articles

To see the other types of publications on this topic, follow the link: Maximum power.

Journal articles on the topic 'Maximum power'

Author: Grafiati

Published: 4 June 2021

Last updated: 9 June 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Maximum power.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Francisco Coelho, Roberto, Walbermark Marques dos Santos, and Denizar Cruz Martins. "INFLUENCE OF POWER CONVERTERS ON PV MAXIMUM POWER POINT TRACKING EFFICIENCY." Eletrônica de Potência 19, no. 1 (February 1, 2014): 73–80. http://dx.doi.org/10.18618/rep.2014.1.073080.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Enrique, Juan Manuel, José Manuel Andújar, Eladio Durán, and Miguel Angel Martínez. "Maximum power point tracker based on maximum power point resistance modeling." Progress in Photovoltaics: Research and Applications 23, no. 12 (May 21, 2015): 1940–55. http://dx.doi.org/10.1002/pip.2620.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Magagula, Sibonelo G. "Power Efficiency Optimization of Switched Reluctance Generator (SRG) Using Power Disturbance Maximum Power Point Tracking (MPPT)." International Journal of Computer and Electrical Engineering 9, no. 2 (2017): 445–54. http://dx.doi.org/10.17706/ijcee.2017.9.2.445-454.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Sooknanan, Anjali. "Minimum Swing Maximum Power." Industrial Vehicle Technology International 2025 (January 2025): 30–34. https://doi.org/10.12968/s1471-115x(25)70048-3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Ramkumar, P. V., R. S. Mishra, and Aman Khurana. "Variation in Maximum Power and Maximum Power point with different parameter analysis." INTERNATIONAL JOURNAL OF ADVANCED PRODUCTION AND INDUSTRIAL ENGINEERING 3, no. 1 (January 25, 2018): 33–35. http://dx.doi.org/10.35121/ijapie201801128.

Full text

Abstract:

Variation in Maximum power and Maximum power point i.e. voltage at which Maximum Power is observed with different parameters are studied. Parameters are insolation, temperature, series resistance, shunt resistance, and reverse saturation current of the diode. For this I-V and P-V characteristics with a variation of these parameters are analyzed. For finding out the Maximum PowerPoint, Perturb & Observe technique is used. Variation in these points is different with each parameter. All simulation work is done in MATLAB.

APA, Harvard, Vancouver, ISO, and other styles

6

Kuperman, Alon, Moshe Averbukh, and Simon Lineykin. "Maximum power point matching versus maximum power point tracking for solar generators." Renewable and Sustainable Energy Reviews 19 (March 2013): 11–17. http://dx.doi.org/10.1016/j.rser.2012.11.012.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

THOMAS, GWENDOLYN A., WILLIAM J. KRAEMER, BARRY A. SPIERING, JEFF S. VOLEK, JEFFREY M. ANDERSON, and CARL M. MARESH. "MAXIMAL POWER AT DIFFERENT PERCENTAGES OF ONE REPETITION MAXIMUM." Journal of Strength and Conditioning Research 21, no. 2 (May 2007): 336–42. http://dx.doi.org/10.1519/00124278-200705000-00008.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Youssef, Ayman, Mohamed El Telbany, and Abdelhalim Zekry. "Reinforcement Learning for Online Maximum Power Point Tracking Control." Journal of Clean Energy Technologies 4, no. 4 (2015): 245–48. http://dx.doi.org/10.7763/jocet.2016.v4.290.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Kumar, Manish, and Charvi Saroj. "Maximum Power Point Tracking using Perturb & Observation Technique." International Journal of Science and Research (IJSR) 10, no. 7 (July 27, 2021): 451–56. https://doi.org/10.21275/sr21703215441.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Drir, N., L. Barazane, and M. Loudini. "Evaluation of Maximum Power Point Controllers in Photovoltaic System." International Journal of Environmental Science and Development 6, no. 4 (2015): 336–40. http://dx.doi.org/10.7763/ijesd.2015.v6.614.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Phong, Le Tien, Nguyen Minh Cuong, Thai Quang Vinh, and Ngo Duc Minh. "Method to Harness Maximum Power from Photovoltaic Power Generation Basing on Completely Mathematical Model." International Journal of Research and Engineering 5, no. 8 (September 2018): 486–93. http://dx.doi.org/10.21276/ijre.2018.5.8.4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Hmurcik, L. V., and J. P. Micinilio. "Contrasts between maximum power transfer and maximum efficiency." Physics Teacher 24, no. 8 (November 1986): 492–93. http://dx.doi.org/10.1119/1.2342101.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Radcenco, Vsevolod, Elena Eugenia Vasilescu, Gheorghe Popescu, and Valentin Apostol. "New approach to thermal power plants operation regimes maximum power versus maximum efficiency." International Journal of Thermal Sciences 46, no. 12 (December 2007): 1259–66. http://dx.doi.org/10.1016/j.ijthermalsci.2007.01.022.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Wang, Tantan, Shumin Sun, Dechao Wan, Taiheng Shao, and Hongzhao Wang. "Improved Photovoltaic Power Generation Maximum Power Tracking Method." IOP Conference Series: Materials Science and Engineering 452 (December 13, 2018): 032111. http://dx.doi.org/10.1088/1757-899x/452/3/032111.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Leong, Chee-Hoi, Steven J. Elmer, and James C. Martin. "Noncircular Chainrings Do Not Influence Maximum Cycling Power." Journal of Applied Biomechanics 33, no. 6 (December 1, 2017): 410–18. http://dx.doi.org/10.1123/jab.2017-0035.

Full text

Abstract:

Noncircular chainrings could increase cycling power by prolonging the powerful leg extension/flexion phases, and curtailing the low-power transition phases. We compared maximal cycling power-pedaling rate relationships, and joint-specific kinematics and powers across 3 chainring eccentricities (CON = 1.0; LOWecc = 1.13; HIGHecc = 1.24). Part I: Thirteen cyclists performed maximal inertial-load cycling under 3 chainring conditions. Maximum cycling power and optimal pedaling rate were determined. Part II: Ten cyclists performed maximal isokinetic cycling (120 rpm) under the same 3 chainring conditions. Pedal and joint-specific powers were determined using pedal forces and limb kinematics. Neither maximal cycling power nor optimal pedaling rate differed across chainring conditions (all p > .05). Peak ankle angular velocity for HIGHecc was less than CON (p < .05), while knee and hip angular velocities were unaffected. Self-selected ankle joint-center trajectory was more eccentric than HIGHecc with an opposite orientation that increased velocity during extension/flexion and reduced velocity during transitions. Joint-specific powers did not differ across chainring conditions, with a small increase in power absorbed during ankle dorsiflexion with HIGHecc. Multiple degrees of freedom in the leg, crank, and pedal system allowed cyclists to manipulate ankle angular velocity to maintain their preferred knee and hip actions, suggesting maximizing extension/flexion and minimizing transition phases may be counterproductive for maximal power.

APA, Harvard, Vancouver, ISO, and other styles

16

Popel, Serhii. "Age Characteristics of Fatigue During Cyclic Work of Maximum Power." Emergency and Nursing Management 1, no. 2 (December 29, 2022): 01–05. http://dx.doi.org/10.58489/2836-2179/007.

Full text

Abstract:

The purpose of the article is a study the age-related features of changes in the functional state of the neuromuscular apparatus during cyclic work before failure in laboratory conditions. Methods:14 adult ski racers (25-28 years old) candidates for masters of sports and 12 teenagers (14-15 years old) I and II sports categories took part in the study. As the maximum physical load (before failure), an imitation of alternating two-step walking in place was used.For each subject, the walking pace was 75% of the maximum.Ski racers performed imitation under an electronic metronome. The length of the step remained unchanged throughout the study; the duration of the simulation reached 30-40 minutes.The following physiological indicators were used to assess the state of the neuromuscular apparatus: reflex excitability of spinal motoneurons (according to the amplitude of the maximum H-response); latent period of H- and M-responses; the speed of propagation of excitation along the sensory and motor fibers of the tibial nerve in the area of the popliteal fossa and the medial condyle (bone) of the tibia using the "Micro-Neuro-Soft" electroneuromyography.Results. It was established that the relative share of motoneurons participating in the reflex response is the same in resting adults and young skiers. The duration of physical exercise in teenagers reached approximately the same values as adult athletes and is 30-40 minutes. However, the dynamics of the studied functional indicators had their own specific features: in young ski racers, the amplitude of the H-response when refusing to continue working decreased by only 24.0% compared to the initial level. Conclusion. Reflex excitability of spinal motoneurons after performing cyclic work of maximum power in adult athletes is more pronounced than in adolescent athletes, which indicates faster fatigue after testing, but high physical performance during testing.

APA, Harvard, Vancouver, ISO, and other styles

17

Velasco, S., J. M. M. Roco, A. Medina, and A. Calvo Hernández. "Feynman's ratchet optimization: maximum power and maximum efficiency regimes." Journal of Physics D: Applied Physics 34, no. 6 (March 14, 2001): 1000–1006. http://dx.doi.org/10.1088/0022-3727/34/6/323.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

Sprague, Robert C., James C. Martin, Christopher J. Davidson, Bruce M. Wagner, and Roger P. Farrar. "Short-Term Maximum Rowing Power." Medicine & Science in Sports & Exercise 36, Supplement (May 2004): S168. http://dx.doi.org/10.1249/00005768-200405001-00803.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

Rathore, T. S. "Generalized Maximum Power Transfer Theorem." IETE Journal of Education 58, no. 1 (January 2, 2017): 39–41. http://dx.doi.org/10.1080/09747338.2017.1332496.

Full text

APA, Harvard, Vancouver, ISO, and other styles

20

Sprague, Robert C., James C. Martin, Christopher J. Davidson, Bruce M. Wagner, and Roger P. Farrar. "Short-Term Maximum Rowing Power." Medicine & Science in Sports & Exercise 36, Supplement (May 2004): S168. http://dx.doi.org/10.1097/00005768-200405001-00803.

Full text

APA, Harvard, Vancouver, ISO, and other styles

21

Wyatt, J. L. "Nonlinear dynamic maximum power theorem." IEEE Transactions on Circuits and Systems 35, no. 5 (May 1988): 563–66. http://dx.doi.org/10.1109/31.1784.

Full text

APA, Harvard, Vancouver, ISO, and other styles

22

Chen, Lin-An, Hui-Nien Hung, and Chih-Rung Chen. "Maximum Average-Power (MAP) Tests." Communications in Statistics - Theory and Methods 36, no. 12 (September 4, 2007): 2237–49. http://dx.doi.org/10.1080/03610920701215480.

Full text

APA, Harvard, Vancouver, ISO, and other styles

23

Heald, Mark A. "Maximum power transfer vs. efficiency." Physics Teacher 26, no. 1 (January 1988): 10. http://dx.doi.org/10.1119/1.2342404.

Full text

APA, Harvard, Vancouver, ISO, and other styles

24

Bejan, Adrian. "Maximum power from fluid flow." International Journal of Heat and Mass Transfer 39, no. 6 (April 1996): 1175–81. http://dx.doi.org/10.1016/0017-9310(95)00209-x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

25

Mohammad, Tawhidul Alam, Hassan Eon Shakib, and Rana Mamon. "Maximum Power Flow Analysis of Simultaneous AC-DC Power Transmission System." Journal of Control and Instrumentation Engineering e-ISSN: 2582-3000 5, no. 3 (December 5, 2019): 27–39. https://doi.org/10.5281/zenodo.3563515.

Full text

Abstract:

<em>Simultaneous AC-DC system can be used to increase the power flow capacity of existing AC transmission system. Present analysis shows that simultaneous AC-DC system can be operated at larger transmission angle compare to pure AC system. In AC system, power flow increases with the increase of transmission angle. But in simultaneous, AC-DC system power flow nature with respect to angle is a bit different from pure AC system. That is, initially power flow increases with the increase of transmission angle and after certain angle the power flow decreases. It is seen that the maximum power flow occurs at an angle which is less than 90<sup>0.</sup> This paper presents a detail analysis about the maximum power flow point in case of simultaneous AC- DC system. The impacts of line voltage, line reactance and thermal limits of the conductor on the maximum power flow point are also clearly investigated in this paper. To get the clear view of the occurrence of maximum power flow point a case study is performed.</em>

APA, Harvard, Vancouver, ISO, and other styles

26

Shoukat, Ahmad Adnan, Adnan Aslam Noon, Muhammad Anwar, Hafiz Waqar Ahmed, Talha Irfan Khan, Hasan Koten, Muftooh Ur Rehman Siddiqi, and Aamer Sharif. "Blades Optimization for Maximum Power Output of Vertical Axis Wind Turbine." International Journal of Renewable Energy Development 10, no. 3 (March 12, 2021): 585–95. http://dx.doi.org/10.14710/ijred.2021.35530.

Full text

Abstract:

Wind power is a significant and urging sustainable power source asset to petroleum derivatives. Wind machines, for example, H-Darrieus vertical pivot wind turbines (VAWTs) have increased much notoriety in research network throughout the most recent couple of decades because of their applications at destinations having moderately low wind speed. Be that as it may, it is noticed that such wind turbines have low effectiveness. The point of this examination is to plan rotor cutting edges which could create most extreme power yield and execution. Different plan factors, for instance, harmony length, pitch edge, rotor distance across, cutting edge length and pitch point are explored to upgrade the presentation of VAWT. Rotor cutting edges are manufactured using the NACA-0030 structure and tried in wind burrow office and contrast its outcomes and DSM 523 profile. Numerical simulations are performed to get best geometry and stream conduct for achieving greatest power. It is seen that for higher tip-speed-proportion (TSR), shorter harmony length and bigger distance across the rotor (i.e., lower robustness) yields higher effectiveness in NACA 0030. Nevertheless, for lower TSR, the more drawn out agreement length and slighter distance across rotor (i.e., higher strength) gives better implementation. The pitch point is - 2° for TSR = 3 and - 3° for TSR = 2.5. The most extreme power yield of the wind turbine is acquired for the sharp edge profile NACA 0030. Besides, instantaneous control coefficient, power coefficient (CP) is the greatest reason for azimuthal edge of 245° and least esteem for 180°.

APA, Harvard, Vancouver, ISO, and other styles

27

Leong, Chee Hoi, Steven J. Elmer, and James C. Martin. "Noncircular Chainrings Do Not Improve Maximum Cycling Power and Joint-Specific Power during Maximal Cycling." Medicine & Science in Sports & Exercise 47 (May 2015): 251–52. http://dx.doi.org/10.1249/01.mss.0000477111.05640.52.

Full text

APA, Harvard, Vancouver, ISO, and other styles

28

Naick, Bhukya Krishna, Tarun Kumar Chatterjee, and Kalyan Chatterjee. "Performance Analysis of Maximum Power Point Tracking Algorithms Under Varying Irradiation." International Journal of Renewable Energy Development 6, no. 1 (March 22, 2017): 65–74. http://dx.doi.org/10.14710/ijred.6.1.65-74.

Full text

Abstract:

Photovoltaic (PV) system is one of the reliable alternative sources of energy and its contribution in energy sector is growing rapidly. The performance of PV system depends upon the solar insolation, which will be varying throughout the day, season and year. The biggest challenge is to obtain the maximum power from PV array at varying insolation levels. The maximum power point tracking (MPPT) controller, in association with tracking algorithm will act as a principal element in driving the PV system at maximum power point (MPP). In this paper, the simulation model has been developed and the results were compared for perturb and observe, incremental conductance, extremum seeking control and fuzzy logic controller based MPPT algorithms at different irradiation levels on a 10 KW PV array. The results obtained were analysed in terms of convergence rate and their efficiency to track the MPP.Article History: Received 3rd Oct 2016; Received in revised form 6th January 2017; Accepted 10th February 2017; Available onlineHow to Cite This Article: Naick, B. K., Chatterjee, T. K. & Chatterjee, K. (2017) Performance Analysis of Maximum Power Point Tracking Algorithms Under Varying Irradiation. Int Journal of Renewable Energy Development, 6(1), 65-74.http://dx.doi.org/10.14710/ijred.6.1.65-74

APA, Harvard, Vancouver, ISO, and other styles

29

Wu, Chih. "Maximum obtainable power of a carnot combined power plant." Heat Recovery Systems and CHP 15, no. 4 (May 1995): 351–55. http://dx.doi.org/10.1016/0890-4332(95)90004-7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

30

Lukutin, B. V., E. B. Shandarova, and M. M. Popov. "A Microhydroelectric Power Plant with Maximum Power Point Tracking." Russian Electrical Engineering 96, no. 1 (January 2025): 61–66. https://doi.org/10.3103/s1068371225700087.

Full text

APA, Harvard, Vancouver, ISO, and other styles

31

Cabral Cavalcanti, Marcelo, Kleber Carneiro de Oliveira, Gustavo Medeiros de Souza Azevedo, and Francisco de Assis dos Santos Neves. "Comparative Study Of Maximum Power Point Tracking Techniques For Photovoltaic Systems." Eletrônica de Potência 12, no. 2 (July 1, 2007): 163–71. http://dx.doi.org/10.18618/rep.2007.2.163171.

Full text

APA, Harvard, Vancouver, ISO, and other styles

32

Kai Guo, Kai Guo, Xiaolin Wang Xiaolin Wang, Cheng Luo Cheng Luo, Pu Zhou Pu Zhou, and Bohong Shu Bohong Shu. "Analysis of the maximum extractable power of photonic crystal fiber lasers." Chinese Optics Letters 12, s2 (2014): S21411–321414. http://dx.doi.org/10.3788/col201412.s21411.

Full text

APA, Harvard, Vancouver, ISO, and other styles

33

Mahobia, S. K. "STUDY OF PHOTOVOLTAIC ENERGY STORAGES SYSTEM USING OF MAXIMUM POWER POINT TRACKING." International Journal of Research -GRANTHAALAYAH 5, no. 2 (February 28, 2017): 119–21. http://dx.doi.org/10.29121/granthaalayah.v5.i2.2017.1711.

Full text

Abstract:

The uniform solar irradiation in the photovoltaic cells, power-voltage characteristics must be unique and the maximum powers are generated from PV cells. The MPPT Device are an essential part for photovoltaic power generation system. Maximum Power Point Tracking (MPPT) are used to optimize photovoltaic cells power.

APA, Harvard, Vancouver, ISO, and other styles

34

Dr., S. K. Mahobia. "STUDY OF PHOTOVOLTAIC ENERGY STORAGES SYSTEM USING OF MAXIMUM POWER POINT TRACKING." International Journal of Research -GRANTHAALAYAH 5, no. 2 (March 4, 2017): 119–21. https://doi.org/10.5281/zenodo.345457.

Full text

Abstract:

The uniform solar irradiation in the photovoltaic cells, power-voltage characteristics must be unique and the maximum powers are generated from PV cells. The MPPT Device are an essential part for photovoltaic power generation system. Maximum Power Point Tracking (MPPT) are used to optimize photovoltaic cells power.

APA, Harvard, Vancouver, ISO, and other styles

35

Rathore, T. S. "Conditions for the Maximum Power Transfer." IETE Journal of Education 54, no. 2 (July 2013): 65–72. http://dx.doi.org/10.1080/09747338.2013.10876107.

Full text

APA, Harvard, Vancouver, ISO, and other styles

36

Crenna, F., A. Palazzo, and G. B. Rossi. "Power measurement in maximum height jump." Journal of Physics: Conference Series 1065 (August 2018): 072031. http://dx.doi.org/10.1088/1742-6596/1065/7/072031.

Full text

APA, Harvard, Vancouver, ISO, and other styles

37

Kanetsrom, Rakel Kristin, and Olav Egeland. "Maximum power absorption with active struts." Journal of Guidance, Control, and Dynamics 18, no. 4 (July 1995): 907–8. http://dx.doi.org/10.2514/3.21476.

Full text

APA, Harvard, Vancouver, ISO, and other styles

38

Cleuren, B., B. Rutten, and C. Van den Broeck. "Universality of efficiency at maximum power." European Physical Journal Special Topics 224, no. 5 (July 2015): 879–89. http://dx.doi.org/10.1140/epjst/e2015-02433-8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

39

Kormanyos, B. K., and G. M. Rebeiz. "Oscillator design for maximum added power." IEEE Microwave and Guided Wave Letters 4, no. 6 (June 1994): 205–7. http://dx.doi.org/10.1109/75.294294.

Full text

APA, Harvard, Vancouver, ISO, and other styles

40

Fyali, Jibji-Bukar, and Anaya-Lara Olimpo. "Offline Photovoltaic Maximum Power Point Tracking." E3S Web of Conferences 64 (2018): 06007. http://dx.doi.org/10.1051/e3sconf/20186406007.

Full text

Abstract:

As more renewable energy sources are connected to the electrical grid, it has become important that these sources participate in providing system support. It has become needful for grid-connected solar photovoltaics to participate in support functions like frequency support. However, photovoltaic systems need to implement a maximum power tracking algorithm to operate at maximum power and a method for de-loading photovoltaic systems is necessary for participation in frequency support. Some conventional maximum power tracking techniques are implemented in real time and will not adjust their output fast enough to provide system support while other may respond fast but are not very efficient in tracking the maximum power point of a photovoltaic system. This paper presents an offline method to estimate the maximum power voltage and current based on the characteristics of the photovoltaics module available in the datasheet and using the estimated values to operate the photovoltaics at maximum power. The performance of this technique is compared to the conventional technique. This paper also describes how the photovoltaic system can be de-loaded.

APA, Harvard, Vancouver, ISO, and other styles

41

Bejan, A., and M. R. Errera. "Maximum power from a hot stream." International Journal of Heat and Mass Transfer 41, no. 13 (July 1998): 2025–35. http://dx.doi.org/10.1016/s0017-9310(97)00256-1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

42

Hall, Charles A. S. "The continuing importance of maximum power." Ecological Modelling 178, no. 1-2 (October 2004): 107–13. http://dx.doi.org/10.1016/j.ecolmodel.2004.03.003.

Full text

APA, Harvard, Vancouver, ISO, and other styles

43

Gordon, J. M., and Mahmoud Huleihil. "On optimizing maximum‐power heat engines." Journal of Applied Physics 69, no. 1 (January 1991): 1–7. http://dx.doi.org/10.1063/1.347744.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

Roy, S., P. P. Chakrabarti, and P. Dasgupta. "Satisfiability Models for Maximum Transition Power." IEEE Transactions on Very Large Scale Integration (VLSI) Systems 16, no. 8 (August 2008): 941–51. http://dx.doi.org/10.1109/tvlsi.2008.2000322.

Full text

APA, Harvard, Vancouver, ISO, and other styles

45

Kong, C. S. "A general maximum power transfer theorem." IEEE Transactions on Education 38, no. 3 (1995): 296–98. http://dx.doi.org/10.1109/13.406510.

Full text

APA, Harvard, Vancouver, ISO, and other styles

46

Wu, Pengyu, Zhengyang Xie, and Mengyi Liu. "Wave Energy Maximum Power Output Design." Highlights in Science, Engineering and Technology 38 (March 16, 2023): 699–707. http://dx.doi.org/10.54097/hset.v38i.5934.

Full text

Abstract:

This paper studies the energy conversion efficiency of the wave energy device, analyzes the force of the wave energy device, uses calculus and difference equation to establish the model, takes the sea level as the X-axis to establish the plane cartesian coordinate system, analyzes the force analysis of the float and the oscillator and obtains the coordinates of the float and the oscillator in equilibrium state. MATLAB tool is used to solve the optimal model of wave energy PTO system power conversion, to maximize energy utilization, and find the corresponding float heave displacement, float velocity, oscillator displacement and oscillator velocity.

APA, Harvard, Vancouver, ISO, and other styles

47

Prasanth Ram, J., and N. Rajasekar. "A Novel Flower Pollination Based Global Maximum Power Point Method for Solar Maximum Power Point Tracking." IEEE Transactions on Power Electronics 32, no. 11 (November 2017): 8486–99. http://dx.doi.org/10.1109/tpel.2016.2645449.

Full text

APA, Harvard, Vancouver, ISO, and other styles

48

Chen, Lingen, Junlin Zheng, Fengrui Sun, and Chih Wu. "Performance comparison of an irreversible closed Brayton cycle under maximum power density and maximum power conditions." Exergy, An International Journal 2, no. 4 (January 2002): 345–51. http://dx.doi.org/10.1016/s1164-0235(02)00070-5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

49

de la Cruz May, Lelio, Efrain Mejia Beltran, Olena Benavides, Aaron Flores Gil, Angeles Yolanda Pages Pacheco, and Jose Alfredo Alvarez-Chavez. "Maximum Pump Power Coupled in Raman Resonator for Maximum Power Delivered at 1115 and 1175 nm." Photonics 10, no. 5 (May 5, 2023): 531. http://dx.doi.org/10.3390/photonics10050531.

Full text

Abstract:

In this report, we present our analysis of the relationship between critical power and stimulated Raman scattering in Raman fiber lasers. Through our research, we have established a connection between the R.G. Smith constant at critical power and the necessary pump power required to reach the maximum power delivered by the first Stokes just prior to the generation of the second Stokes. In our experiments, two setups were successful in reaching the second Stokes generation, one utilizing a glass–air interface as the output coupler without HR mirrors and the other using HR-FBGs for both Stokes in conjunction with a glass–air interface. We found that the 1 Km 1060-XP fiber has an R.G. Smith constant of ~4.94 at critical power, which when multiplied by 2 gives ~9.88, a value close to the R.G. Smith constant (9.75) for maximum Stokes corresponding to a pump power of 5.5 W, with an approximation of ~98.6%. Our results demonstrate the importance of knowing the R.G. Smith constant at critical power in estimating the necessary pump power to achieve maximum power delivery in any Stokes component.

APA, Harvard, Vancouver, ISO, and other styles

50

Huang, Yue Hua, Huan Huan Li, and Guang Xu Li. "Maximum Wind Power Tracking Strategy of Wind Power Generation System." Applied Mechanics and Materials 313-314 (March 2013): 813–16. http://dx.doi.org/10.4028/www.scientific.net/amm.313-314.813.

Full text

Abstract:

Aiming at maximum wind power tracking control problem of wind power generation system below the rated wind speed, this paper presents an improved MPPT control strategy by using turbulent part of the wind speed as a search signal to find the maximum power point. By using the Matlab/Simulink simulation of the wind power generation system below the rated wind speed, this paper proves the effectiveness of this control strategy. The simulation results show that improved MPPT control strategy can well control the wind turbine speed to track the wind speed changes to maintain optimum tip speed ratio and the maximum power coefficient.

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!