Relevant bibliographies by topics / Measurement of dispersion

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Measurement of dispersion'

Author: Grafiati
Published: 4 June 2021
Last updated: 17 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Measurement of dispersion.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Measurement of dispersion"

1

SAKATA, H., K. HOSOKAWA, and T. KATO. "MEASUREMENT OF DIELECTRIC DISPERSION IN MULTI-FERROIC TbMnO3." International Journal of Modern Physics B 21, no. 18n19 (July 30, 2007): 3425–28. http://dx.doi.org/10.1142/s0217979207044676.

Full text
Abstract:
We measured the dielectric dispersion in multi-ferroic TbMnO 3. We observed two kinds of the dielectric dispersions. One dispersion showed the monotonous temperature dependence of the relaxation frequency across the ferroelectric transition temperature, Tc. This dispersion is thought to be originated from the localized charge. The other dispersion existed only near the Tc, attributed to the ferroelectric transition. We found the former dispersion enhanced its strength near Tc. This indicates that the localized charge couples with the electric moment which orders in the ferroelectric phase.
APA, Harvard, Vancouver, ISO, and other styles
2

Medhat, M., S. Y. El-Zaiat, M. F. Omar, S. S. Farag, and S. M. Kamel. "Refraction and dispersion measurement using dispersive Michelson interferometer." Optics Communications 393 (June 2017): 275–83. http://dx.doi.org/10.1016/j.optcom.2017.02.039.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

MACFARLANE, P. W. "Measurement of QT dispersion." Heart 80, no. 5 (November 1, 1998): 421–23. http://dx.doi.org/10.1136/hrt.80.5.421.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Al-Qdah, M. T. "Employing dispersion-flattened fiber for chromatic dispersion measurement." Optical Engineering 45, no. 5 (May 1, 2006): 055005. http://dx.doi.org/10.1117/1.2205828.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Jin, J., W. Kaewsakul, J. W. M. Noordermeer, W. K. Dierkes, and A. Blume. "MACRO- AND MICRO-DISPERSION OF SILICA IN TIRE TREAD COMPOUNDS: ARE THEY RELATED?" Rubber Chemistry and Technology 94, no. 2 (April 1, 2021): 355–75. http://dx.doi.org/10.5254/rct.20.80365.

Full text
Abstract:
ABSTRACT The dispersion of rubber fillers, such as silica, can be divided into two categories: macro- and micro-dispersion. Both dispersions are important; however, to achieve the best reinforcement of rubber, micro-dispersion of silica is crucial. The common view is that these filler dispersions are strongly related. The micro-dispersion is understood as the consequence of the continuous breakdown of filler clusters from macro-dispersion. Yet, a large problem is that an objective unequivocal direct measurement method for micro-dispersion is not available. In this study, a set of parameters is defined that are anticipated to have an influence on the micro- as well as the macro-dispersion. Mixing trials are performed with varying silanization temperature and time, different amounts of silane coupling agent, and by using silicas with different structures and specific surface areas. The degrees of micro- and macro-dispersion are evaluated by measuring the Payne effect as an indirect method for micro-dispersion and using a dispergrader for quantitative measurement of macro-dispersion. The results show that the filler dispersion processes happen simultaneously but independently. These results are supported by earlier work of Blume and Uhrlandt, who stated as well that micro- and macro-dispersion are independent. The major influencing factors on micro- and macro-dispersion of silica are also identified.
APA, Harvard, Vancouver, ISO, and other styles
6

Glazunova, A. M., and I. N. Kolosok. "Influence of the weight coefficients of measurements on the consistency of the assessment and calculation results of the power supply system steady-state operation conditions." Proceedings of Irkutsk State Technical University 25, no. 2 (May 2, 2021): 172–82. http://dx.doi.org/10.21285/1814-3520-2021-2-172-182.

Full text
Abstract:
The aim of this work is to develop an improved procedure for assessing the state of power supply systems based on adjusting the weight coefficients of measurements. To this end, non-linear optimisation methods were used. The control equations and the solution of the simultaneous linear equations were performed using the Crout method. The results of the calculation of the electrical power steady-state mode were considered as a reference. The lower the difference between the evaluation and steady-state calculation results, the higher the accuracy of the overall state assessment procedure. The problem of correcting the weight factors is set and solved as a nonlinear optimisation problem, where the optimisation parameters are taken as the dispersion of the measurements. The objective function was formulated as follows: to minimise the measurement evaluation dispersions that are part of a single control equation by maximising the active power measurements dispersion in the swing bus of the power supply system. In this study, limitations in the form of equation and inequality are monitored. The problem of optimising the dispersions is solved after the first iteration of the state assessment; starting with the second iteration, the state assessment is performed with new measurement weight factors. The calculations were performed on a 6-node test circuit. The control equations are drawn from the current measurements. The measurements data on the selected control equation of the test circuit are used to calculate the target function. The accuracy of the dispersions redistribution and their extreme values are controlled by the limitations. The results showed that, when adjusting the dispersion of measurements, the power assessments at all nodes are closer to the steady-state mode calculation results.
APA, Harvard, Vancouver, ISO, and other styles
7

Plant, Genevieve, Andreas Hangauer, Ting Wang, and Gerard Wysocki. "Fiber dispersion measurement using chirped laser dispersion spectroscopy technique." Applied Optics 54, no. 33 (November 16, 2015): 9844. http://dx.doi.org/10.1364/ao.54.009844.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

von Brasch, Thomas, Diana‐Cristina Iancu, and Terje Skjerpen. "Productivity Dispersion and Measurement Error." Review of Income and Wealth 66, no. 4 (November 11, 2019): 985–96. http://dx.doi.org/10.1111/roiw.12455.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Min Zhang, Min Zhang, Shanfeng Li Shanfeng Li, Nuannuan Shi Nuannuan Shi, Yiying Gu Yiying Gu, Pengsheng Wu Pengsheng Wu, and Xiuyou Han and Mingshan Zhao Xiuyou Han and Mingshan Zhao. "Novel method for fiber chromatic dispersion measurement based on microwave photonic technique." Chinese Optics Letters 10, no. 7 (2012): 070602–70604. http://dx.doi.org/10.3788/col201210.070602.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Rabins, John M., and David L. Drummond. "Anomalous dispersion: a new measurement approach." Applied Optics 26, no. 6 (March 15, 1987): 1122. http://dx.doi.org/10.1364/ao.26.001122.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Measurement of dispersion"

1

Aiesh, Basel. "Measurement of dispersion barriers through SEM images." Thesis, Uppsala universitet, Centrum för bildanalys, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-252764.

Full text
Abstract:
In this thesis digital image analysis is applied to Scanning Electron Microscope imagesof dispersion barriers to measure specific properties. The thin barriers are used asprotection for paperboard packaging and are made of polymers and fillers. The orientation, area, length and density distributions of the fillers determine the functionality and quality of the barrier. Methods built on image analysis tools are developed with the objective to measure these quantities. Input for the methods are Scanning Electron Microscope images showing the cross-section of the barriers. To make the images relevant for the methods they are preprocessed by reducing noise and distinguishing fillers from the background. For measuring the orientation distribution of the fillers two different methods are implemented and compared. The first one is based on a structure tensor and the other one applies a covariance matrix. The structure tensor is preferable because of its flexibility and better performance for complex images. The area and length distributions are measured by applying mathematical morphology together withsoft-clipping. The density distribution is obtained by filtering the underlying image twice with a uniform filter which creates a heat map. The developed methods are evaluated by applying them on fabricated binary test images with known properties. The methods are very accurate when applied on simple test images but for more complex test images with greater variation the accuracy decreases. However, for most applications the results are still on an acceptable level.
APA, Harvard, Vancouver, ISO, and other styles
2

Myslivets, Yauheni. "Spatially resolved measurement in fibers with arbitrary chromatic dispersion." Diss., [La Jolla] : University of California, San Diego, 2010. http://wwwlib.umi.com/cr/ucsd/fullcit?p3391413.

Full text
Abstract:
Thesis (Ph. D.)--University of California, San Diego, 2010.
Title from first page of PDF file (viewed February 25, 2010). Available via ProQuest Digital Dissertations. Vita. Includes bibliographical references (p. 128-135).
APA, Harvard, Vancouver, ISO, and other styles
3

O'Leary, Michael Boyer 1969. "Geographic dispersion in teams : its history, experience, measurement, and change." Thesis, Massachusetts Institute of Technology, 2002. http://hdl.handle.net/1721.1/16883.

Full text
Abstract:
Thesis (Ph. D.)--Massachusetts Institute of Technology, Sloan School of Management, 2002.
Vita.
Includes bibliographical references.
This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.
This thesis begins with the simple argument that geographic dispersion has gone surprisingly unexamined despite its role as the domain-defining construct for geographically dispersed teams (a.k.a. "virtual teams"). The last few years have seen slow but steady growth in field studies of such teams, but our understanding of geographic dispersion and the role it plays in work is stillquite limited. The thesis attempts to open the "black box" of geographic dispersion, show that it is far from a new phenomenon in organizations, understand the ways in which it is experienced, propose ways in which it can be measured, and understand the effects of doing work at increasing degrees of dispersion. It does so through three studies which combine qualitative and quantitative methods, and draw on archival, survey, observational, and interview data. Study 1 uses rich archival data covering more than two centuries (1670-1950) of the life of one firm - i.e., the Hudson's Bay Company - to understand its far-flung managers' experience of dispersion. It shows that the managers experienced their dispersion through a combination of coordination, communication, isolation, and control challenges. It also serves as a "typifier," showing that modem "virtual" teams have deep historical roots. Study 2 proposes a multi-dimensional definition of dispersion, including spatial-temporal distance and configuration, as well as a series of new measures to capture those dimensions. It explores the measures and their relationship to communications frequency in a sample of 115 dispersed project teams from a Fortune 500 company.
(cont.) Study 3 is based on field research with nine geographically dispersed internal consulting teams in a large, national humanitarian aid organization. It follows them from the inception to the completion of their work and compares two teams in detail. One team was moderately dispersed and one was a pilot for a more fully dispersed approach to the internal consulting projects. It finds that perceptions about timing and dispersion differ from more objective measures like those in Study 2. It also shows how dispersion is a challenge for team boundaries and calls for more attention to the weighting of different team effectiveness criteria. Keywords: geographic dispersion, teams, virtual teams, effectiveness, communications, history.
by Michael Boyer O'Leary.
Ph.D.
APA, Harvard, Vancouver, ISO, and other styles
4

Pathak, Prashant, Olivier Guyon, Nemanja Jovanovic, Julien Lozi, F. Martinache, Y. Minowa, T. Kudo, H. Takami, Y. Hayano, and N. Narita. "First on-sky closed loop measurement and correction of atmospheric dispersion." SPIE-INT SOC OPTICAL ENGINEERING, 2016. http://hdl.handle.net/10150/622049.

Full text
Abstract:
In the field of exoplanetary sciences, high contrast imaging is crucial for the direct detection of, and answering questions about habitability of exoplanets. For the direct imaging of habitable exoplanets, it is important to employ low inner working angle (IWA) coronagraphs, which can image exoplanets close to the PSF. To achieve the full performance of such coronagraphs, it is crucial to correct for atmospheric dispersion to the highest degree, as any leakage will limit the contrast. To achieve the highest contrast with the state-of-the-art coronagraphs in the SCExAO instrument, the spread in the point-spread function due to residual atmospheric dispersion should not be more than 1 mas in the science band. In a traditional approach, atmospheric dispersion is compensated by an atmospheric dispersion compensator (ADC), which is simply based on model which only takes into account the elevation of telescope and hence results in imperfect correction of dispersion. In this paper we present the first on-sky closed-loop measurement and correction of residual atmospheric dispersion. Exploiting the elongated nature of chromatic speckles, we can precisely measure the presence of atmospheric dispersion and by driving the ADC, we can do real-time correction. With the above approach, in broadband operation (y-H band) we achieved a residual of 4.2 mas from an initial 18.8 mas and as low as 1.4 mas in H-band only after correction, which is close to our science requirement. This work will be valuable in the field of high contrast imaging of habitable exoplanets in the era of the ELTs.
APA, Harvard, Vancouver, ISO, and other styles
5

Júnior, Reinaldo Borges. "Desenvolvimento de método de medição das espessuras de núcleos e revestimentos de placas combustíveis." Universidade de São Paulo, 2013. http://www.teses.usp.br/teses/disponiveis/85/85134/tde-03022014-162505/.

Full text
Abstract:
Um dos componentes mais importantes de um Reator Nuclear é o Combustível Nuclear. Atualmente, o mais avançado combustível comercial, cuja aplicabilidade nos reatores brasileiros vem sendo desenvolvida pelo IPEN desde 1985, é o siliceto de urânio U3Si2. Este é formado por placas combustíveis com núcleos de dispersão (onde o material físsil (U3Si2) é disperso homogeneamente em uma matriz de alumínio) revestidos por alumínio. Tal combustível é produzido no Brasil com tecnologia totalmente nacional, resultado do esforço realizado pelo grupo de fabricação de combustíveis nucleares (CCN Centro do Combustível Nuclear) do IPEN. Diante da necessidade do aumento da potência do reator IEA-R1 e da construção do Reator Multipropósito Brasileiro (RMB), para a produção de radioisótopos principalmente para fins na área da medicina , haverá significativo aumento na produção deste combustível nuclear no IPEN. Em face desta conjuntura, faz-se necessário o desenvolvimento de técnicas de qualificação mais modernas e automatizadas. Visando a este objetivo, neste trabalho foi desenvolvido um novo método computacional de medição de espessuras de núcleos e revestimentos de placas combustíveis, o qual é capaz de realizar tais medidas em tempo menor e com dados estatísticos mais significativos, quando comparado com o método atual de medição.
One of the most important components of a nuclear reactor is the Nuclear Fuel. Currently, the most advanced commercial fuel, whose applicability in Brazilian reactors has been developed by IPEN since 1985, is the silicide U3Si2. This is formed by fuel plates with nuclei dispersion (where the fissile material (U3Si2) is homogeneously dispersed in a matrix of aluminum) coated aluminum. This fuel is produced in Brazil with developed technology, the result of the efforts made by the group of manufacturing nuclear fuel (CCN - Center of Nuclear Fuel) of IPEN. Considering the necessity of increasing the power of the IEA- R1 and Brazilian Multipurpose Reactor Building (RMB), for the production of radioisotopes - mainly for the area of medicine - there will be significant increase in the production of nuclear fuel at IPEN. Given this situation, if necessary, make the development of more modern and automated classification techniques. Aiming at this goal, this work developed a new computational method for measuring thickness of core and cladding of fuel plates, which are able to perform such measurements in less time and with more meaningful statistical data when compared with the current method of measurement.
APA, Harvard, Vancouver, ISO, and other styles
6

Molyneux, Joseph B. "Laboratory measurement of elastic-wave velocity, associated dispersion, attenuation and particle resonance." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2000. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape4/PQDD_0010/NQ60005.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Eun, Sangho. "HYDROGEN SULFIDE FLUX MEASUREMENTS AND DISPERSION MODELING FROM CONSTR." Master's thesis, University of Central Florida, 2004. http://digital.library.ucf.edu/cdm/ref/collection/ETD/id/3234.

Full text
Abstract:
Odor problems are a common complaint from residents living near landfills. Many compounds can cause malodorous conditions. However, hydrogen sulfide (h2s) has been identified as a principal odorous component from construction and demolition (c&d)debris landfills. Although several studies have reported the ambient concentrations of h2s near c&d landfills, few studies have quantified emission rates of h2s. The most widely used and proven technique for measuring gas emission rates from landfills is the flux chamber method. Typically the flux chamber is a cylindrical enclosure device with a spherical top which limits the gas emission area. Pure zero grade air is introduced into the chamber, allowed to mix with emitting gases captured from the landfill surface, and then transported to the exit port where concentrations can be measured. Flux measurements using the flux chamber were performed at five different c&d landfills from june to august, 2003. The flux rates of h2s measured in this research were three to six orders of magnitude lower than the flux rates of methane reported in the literature. In addition to the h2s flux measurements, dispersion modeling was conducted, using the epa dispersion model, industrial source complex short term (iscst3), in order to evaluate impacts on landfill workers and communities around the landfills. The modeling results were analyzed to estimate the potential ground level maximum h2s concentrations for 1-hr and 3-min periods and the frequency (occurrences per year) above the h2s odor detection threshold for each landfill. Odor complaints could be expected from four among five landfills selected for this study, based on 0.5-ppb odor detection threshold.
M.S.
Department of Civil and Environmental Engineering
Engineering and Computer Science
Environmental Engineering
APA, Harvard, Vancouver, ISO, and other styles
8

O'Connor, Caleb S. "Measurement of Dispersion and Attenuation in Granular Media using a Filter-Correlation Method." Thesis, University of Louisiana at Lafayette, 2015. http://pqdtopen.proquest.com/#viewpdf?dispub=1592420.

Full text
Abstract:

A wideband technique for measuring sound dispersion and frequency-dependent attenuation in granular media is presented. The measurements were done on a mono-disperse medium of 2-cm solid polypropylene balls, over the frequency range of 500 Hz-20 kHz, enough to cover both weak and strong scattering regimes. A horn driver was used to launch sound into a foam-lined bucket containing the granular medium. The latter was mechanically isolated from the driver so as to minimize direct-contact coupling. The foam isolation was not enough, especially at resonances of the bucket-granular system. In the effort to simulate a free-granular medium, the bucket was replaced with a mesh bag hanging in free space. The frequency-dependent wavenumber of the granular is obtained by a filter-correlation method. After successive bandpass filtering, the phase speed and attenuation are obtained within each band, respectively, by signal alignment and amplitude log ratio. The attenuation coefficient yielded reasonable results, illustrating the transition from ``piston-like" dynamics to the strong scattering regime, as the frequency increased. The phase speed results where more sporadic, qualitatively there is a decrease in sound speed as the frequency increases.

APA, Harvard, Vancouver, ISO, and other styles
9

BARROS, FABRICIO JOSE BRITO. "MEASUREMENT AND ANALYZE OF UWB INDOOR CHANNEL TEMPORAL DISPERSION IN SEVERAL ENVIRONMENT TYPES." PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 2005. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=7585@1.

Full text
Abstract:
COORDENAÇÃO DE APERFEIÇOAMENTO DO PESSOAL DE ENSINO SUPERIOR
Este trabalho apresenta a análise das características de dispersão temporal do canal de propagação banda ultra larga (UWB) feitas a partir da técnica de sondagem em freqüência na banda de 850MHz em sete diferentes ambientes Indoor. Nestes ambientes os parâmetros de dispersão temporal dados pelo retardo médio, retardo RMS e banda de coerência são obtidos. Uma análise adicional sobre a perda de propagação e sobre a robustez do sinal UWB a desvanecimento de pequena escala é também realizada.
This work presents an analysis of the ultra wideband (UWB) channel temporal dispersion characteristics evaluated from the frequency sounding technique over a bandwidth of 850MHz at seven different indoor environment. In each environment, the channel temporal dispersions parameters were assessed in terms of mean delay, delay spread and coherence bandwidth. An additional analysis related to path loss and UWB robustness was also evaluated.
APA, Harvard, Vancouver, ISO, and other styles
10

Trubko, Raisa, and Raisa Trubko. "Tune-out Wavelength Measurement and Gyroscope Using Dispersion Compensation in an Atom Interferometer." Diss., The University of Arizona, 2017. http://hdl.handle.net/10150/625677.

Full text
Abstract:
This Dissertation describes how I used a three nanograting Mach-Zehnder atom beam interferometer to precisely measure a wavelength of light, known as a tune-out wavelength, that causes zero energy shift for an atom. I also describe how such measurements can be remarkably sensitive to rotation rates. It is well known that atom interferometry can be used to measure accelerations and rotations, but it was a surprise to find out that tune-out wavelength measurements can under certain conditions be used to report the absolute rotation rate of the laboratory with respect to an inertial frame of reference. I also describe how we created conditions which improve the accuracy of tune out wavelength measurements. These measurements are important because they serve as a benchmark test for atomic structure calculations of line strengths, oscillator strengths, and dipole matrix elements. I present a new measurement of the longest tune-out wavelength in potassium, λzero = 768.9701(4) nm. To reach sub-picometer precision, an optical cavity surrounding the atom beam paths of the interferometer was used. Although this improved the precision of our experiment by increasing the light-induced phase shifts, the cavity also brought several systematic errors to our attentions. For example, I found that large ±200 pm shifts in tune-out wavelengths can occur due to the Earth's rotation rate. To solve this problem, I demonstrated that controlling the optical polarization, the magnetic field, and the atom beam velocity distribution can either suppress or enhance these systematic shifts. Suppressing these systemic shifts in tune-out wavelengths is useful for precision measurements used to test atomic structure calculations. By enhancing these systematic shifts, the interferometer can be a gyroscope that utilizes tune-out wavelengths.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Measurement of dispersion"

1

Martin, Ralf. Productivity dispersion, competition and productivity measurement. London: Centre for Economic Performance, London School of Economics and Political Science, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Muller, Christophe. The measurement of poverty with geographical and intertemporal price dispersion. [Nottingham]: University of Nottingham, Centre for Research in Economic Development and International Trade, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Delvigne, G. A. L. Measurement of vertical turbulent dispersion and diffusion of oil droplets and oiled particles: Final report. Redmond, Wash: Engineering Hydraulics, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Vaill, J. E. Traveltime and dispersion of contaminants in the Yampa River from Steamboat Springs to the Green River, northwestern Colorado. [Reston, Va.?: U.S. Dept. of the Interior, U.S. Geological Survey, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Cowperthwaite, N. A. Full scale and wind tunnel surface pressure measurements on the T.R.R.L. spray dispersion programme vehicles. Cranfield, U.K: College of Aeronautics, Cranfield Institute of Technology, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Group, Alberta Alberta Environmental Protection Model Modification Task. Dispersion Modelling Modification Task Group recommendation report for the Alberta air quality guidelines. Edmonton]: Model Modification Task Group, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Bateman, J. E. Precision measurement of x-ray line spectra by energy dispersion in a gas microstrip detector. Chilton: Rutherford Appleton Laboratory, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Hsu, S. A. Air quality and dispersion meteorology over the northeastern Gulf of Mexico: Measurement, analyses, and syntheses. New Orleans, La. (1201 Elmwood Park Blvd., New Orleans 70123-2394): U.S. Dept. of the Interior, Minerals Management Service, Gulf of Mexico OCS Region, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Balogh, Morgan. Analysis of particulate matter dispersion near urban roadways: Final technical report, Research Project GC8719, Task 35, Particulate Matter Dispersion Near Urban Freeways. [Olympia, Wash.?]: Washington State Dept. of Transportation, Washington State Transporation Commission, in cooperation with U.S. Dept. of Transportation, Federal Highway Administration, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Balogh, Morgan. Analysis of particulate matter dispersion near urban roadways: A summary : final report, Research Project GC8719, Task 35, Particulate Matter Dispersion Near Urban Freeways. [Olympia, Wash.?]: Washington State Dept. of Transportation, Washington State Transporation Commission, in cooperation with U.S. Dept. of Transportation, Federal Highway Administration, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Measurement of dispersion"

1

Allen, Terence. "Dispersion of powders." In Particle Size Measurement, 285–309. Dordrecht: Springer Netherlands, 1990. http://dx.doi.org/10.1007/978-94-009-0417-0_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Vinh, Jean Tuong. "Measurement of Structural Damping." In Mechanical Characterization of Materials and Wave Dispersion, 187–208. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118621264.ch8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Schatzmann, Michael, Bernd Leitl, and Joachim Liedtke. "Dispersion in Urban Environments." In Urban Air Quality: Measurement, Modelling and Management, 249–57. Dordrecht: Springer Netherlands, 2000. http://dx.doi.org/10.1007/978-94-010-0932-4_27.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Correig, Antoni M. "Body-Wave Dispersion: Measurement and Interpretation." In Source Mechanism and Seismotectonics, 561–76. Basel: Birkhäuser Basel, 1991. http://dx.doi.org/10.1007/978-3-0348-8654-3_13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Caputo, Michele. "Distance Measurement with Electromagnetic Wave Dispersion." In International Association of Geodesy Symposia, 48–60. Berlin, Heidelberg: Springer Berlin Heidelberg, 2001. http://dx.doi.org/10.1007/978-3-642-56677-6_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Hassan, S. S., R. K. Bullough, R. Saunders, and H. A. Batarfi. "Generalized Dispersion Relations for Dielectrics in Squeezed Vacua." In Quantum Communications and Measurement, 89–95. Boston, MA: Springer US, 1995. http://dx.doi.org/10.1007/978-1-4899-1391-3_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Boivin, L., C. R. Doerr, K. Bergman, and H. A. Haus. "Quantum Noise Reduction Using a Nonlinear Sagnac Loop with Positive Dispersion." In Quantum Communications and Measurement, 487–96. Boston, MA: Springer US, 1995. http://dx.doi.org/10.1007/978-1-4899-1391-3_48.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Salin, F., P. Grangier, P. Georges, G. Roger, and A. Brun. "Femtosecond Laser Cavity Dispersion Measurement Using Soliton Properties." In Springer Series in Chemical Physics, 51–53. Berlin, Heidelberg: Springer Berlin Heidelberg, 1990. http://dx.doi.org/10.1007/978-3-642-84269-6_16.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Hirsekorn, S., and E. Schneider. "Characterization of Rolling Texture by Ultrasonic Dispersion Measurement." In Nondestructive Characterization of Materials, 289–95. Berlin, Heidelberg: Springer Berlin Heidelberg, 1989. http://dx.doi.org/10.1007/978-3-642-84003-6_33.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Nimmon, C. C., K. E. Britton, M. Granowska, J. S. P. Lumley, B. Mahendra, J. Drinkwater, M. Charlesworth, L. A. Hawkins, M. J. Carroll, and D. P. E. Kingsley. "Measurement of the Intracerebral Blood Flow Distribution Using a Dispersion Model." In Cerebral Blood Flow and Metabolism Measurement, 214–19. Berlin, Heidelberg: Springer Berlin Heidelberg, 1985. http://dx.doi.org/10.1007/978-3-642-70054-5_34.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Measurement of dispersion"

1

Cuadrado-Gallego, Juan J., Pablo Rodriguez-Soria, Alberto Lucendo, Robert Neumann, Reiner Dumke, and Andreas Schmietendorf. "COSMIC Measurements Dispersion." In 2012 Joint Conf of 22nd Int'l Workshop on Software Measurement and the 7th Int'l Conference on Software Process and Product Measurement (IWSM-MENSURA). IEEE, 2012. http://dx.doi.org/10.1109/iwsm-mensura.2012.20.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Heffner, Brian L. "Measurement of polarization mode dispersion." In Optical Fiber Communication Conference. Washington, D.C.: OSA, 1994. http://dx.doi.org/10.1364/ofc.1994.the1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Riazi, A., C. Chen, E. Y. Zhu, A. V. Gladyshev, P. G. Kazansky, and L. Qian. "Dispersion measurement via stimulated parametric process." In 2020 Photonics North (PN). IEEE, 2020. http://dx.doi.org/10.1109/pn50013.2020.9166945.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Nad, Shreya, Nathan Butcher, Dmitry Pestov, Vadim V. Lozovoy, and Marcos Dantus. "Single-Shot Transient Pulse Dispersion Measurement." In CLEO: Applications and Technology. Washington, D.C.: OSA, 2012. http://dx.doi.org/10.1364/cleo_at.2012.jw4a.47.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Klimentov, D., N. Tolstik, V. L. Kalashnikov, V. V. Dvoyrin, and I. T. Sorokina. "Dispersion Measurement of Infrared Specialty Fibers." In CLEO: Applications and Technology. Washington, D.C.: OSA, 2012. http://dx.doi.org/10.1364/cleo_at.2012.jw2a.67.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Li, Chaoyang, Yuan Zhen, Liu Xiumin, and Bojun Yang. "Polarization mode dispersion measurement and compensation." In Asia-Pacific Optical and Wireless Communications Conference and Exhibit, edited by Shuisheng Jian and Yanming Liu. SPIE, 2001. http://dx.doi.org/10.1117/12.444893.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Wakayama, Toshitaka, Hiroyuki Kowa, Yukitoshi Otani, Norihiro Umeda, and Toru Yoshizawa. "Birefringence dispersion measurement by geometric phase." In Optomechatronic Systems III, edited by Toru Yoshizawa. SPIE, 2002. http://dx.doi.org/10.1117/12.467709.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Li, Chengshuai, weidong shen, Yueguang Zhang, and Xu Liu. "Group delay dispersion measurement of dispersive mirrors using scanning white-light interferometry." In Optical Interference Coatings. Washington, D.C.: OSA, 2013. http://dx.doi.org/10.1364/oic.2013.wd.5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

de Delgado, E., and A. C. da Franca Correa. "Experimental Measurement of Dispersion Coefficients for Gases." In Canadian International Petroleum Conference. Petroleum Society of Canada, 2001. http://dx.doi.org/10.2118/2001-083.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Hizem, Mehdi, Henri Budan, Benoit Deville, Ollivier Faivre, Laurent Mosse, and Matthieu Simon. "Dielectric Dispersion: A New Wireline Petrophysical Measurement." In SPE Annual Technical Conference and Exhibition. Society of Petroleum Engineers, 2008. http://dx.doi.org/10.2118/116130-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Measurement of dispersion"

1

Cooper, D. E. Picosecond Optoelectronic Measurement of Microstrip Dispersion. Fort Belvoir, VA: Defense Technical Information Center, September 1985. http://dx.doi.org/10.21236/ada161980.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Stevens, Jeffry L. Surface Wave Detection and Measurement Using a One Degree Global Dispersion Grid. Fort Belvoir, VA: Defense Technical Information Center, May 2006. http://dx.doi.org/10.21236/ada456328.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Menzie, D. E. Dispersion measurement as a method of quantifying geologic characterization and defining reservoir heterogeneity. Final report. Office of Scientific and Technical Information (OSTI), May 1995. http://dx.doi.org/10.2172/71301.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Hoffman, Robert C., and Andrew G. Mott. Measurement of the Two-photon Absorption Coefficient of Gallium Phosphide (GaP) Using a Dispersion-minimized Sub-10 Femtosecond Z-scan Measurement System. Fort Belvoir, VA: Defense Technical Information Center, September 2012. http://dx.doi.org/10.21236/ada570407.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Foster, K., E. Arnold, D. Bonner, B. Eme, K. Fischer, J. Gash, J. Nasstrom, et al. Integration of AMS and ERDS Measurement Data into NARAC Dispersion Models FY05 Technology Integration Project Final Report. Office of Scientific and Technical Information (OSTI), September 2005. http://dx.doi.org/10.2172/878228.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Menzie, D. E. Dispersion measurement as a method of quantifying geologic characterization and defining reservoir heterogeneity. Annual report, July 12, 1990--September 12, 1991. Office of Scientific and Technical Information (OSTI), April 1992. http://dx.doi.org/10.2172/10192980.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Menzie, D. E. Dispersion measurement as a method of quantifying geologic characterization and defining reservoir heterogeneity. [Quarterly] report, July 12, 1993--October 12, 1993. Office of Scientific and Technical Information (OSTI), December 1993. http://dx.doi.org/10.2172/10131416.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Menzie, D. E. Dispersion measurement as a method of quantifying geologic characterization and defining reservoir heterogeneity. Annual report, July 12, 1992--July 12, 1993. Office of Scientific and Technical Information (OSTI), January 1994. http://dx.doi.org/10.2172/10133117.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

McKinney, Jason D., and John Diehl. Measurement of Chromatic Dispersion using the Baseband Radio-Frequency Response of a Phase-Modulated Analog Optical Link Employing a Reference Fiber. Fort Belvoir, VA: Defense Technical Information Center, September 2007. http://dx.doi.org/10.21236/ada472284.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Prasad, Kuldeep, Anthony Bova, James R. Whetstone, and Elena Novakovskaia. Greenhouse Gas Emissions and Dispersion : 1. Optimum Placement of Gas Inlets on a Building Rooftop for the Measurement of Greenhouse Gas Concentration. National Institute of Standards and Technology, April 2013. http://dx.doi.org/10.6028/nist.sp.1158.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Measurement of dispersion' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography