Relevant bibliographies by topics / Measuring equipment with USB interface

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Book chapters
  4. Conference papers

Academic literature on the topic 'Measuring equipment with USB interface'

Author: Grafiati
Published: 4 June 2021
Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Measuring equipment with USB interface.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Measuring equipment with USB interface"

1

He, Hong, Jian Li Peng, Da Jian Zhang, and Ming Feng Hou. "USB Interfaces are Based on the Metal which Measurement." Advanced Materials Research 179-180 (January 2011): 437–42. http://dx.doi.org/10.4028/www.scientific.net/amr.179-180.437.

Full text
Abstract:
Corrosion rate in measuring metal corrosion by electrochemical sensors measuring speed, through the internal chip processed data to the screen, the traditional method of communication with the host computer is using RS232 or RS485 interface does not have hot swappable and Plug features used, storage capacity is also limited. To solve this problem, the device USB-interface to communicate with the host computer and realized the hot swap and plug and play function, memory is extended and improve equipment storage capacity, the design of PC applications that facilitates the user. Experimental results show that the system has good stability, easy operation, greatly increased the use of the instrument, a bright future.
APA, Harvard, Vancouver, ISO, and other styles
2

Rieke Adriati Wijayanti, Ahmad Wilda Yulianto, Dianthy Marya, Muhammad Syirajuddin S., and Nurul Hidayati. "Antarmuka Mikrokontroller IoT (ESP32) Dengan USB Host max3421e." Journal of Applied Smart Electrical Network and Systems 1, no. 02 (December 31, 2020): 70–75. http://dx.doi.org/10.52158/jasens.v1i02.141.

Full text
Abstract:
Electronic equipment made using old technology or electronic equipment in the entry-level category has not been supported by networking equipment, so for the data communication process, the microcontroller requires interfacing facilities that are in accordance with the electronic equipment used, such as a USB port. With the microcontroller that supports IoT, it allows electronic equipment to communicate over the network. An IoT microcontroller such as the ESP32 is equipped with a WiFi feature but is not equipped with a USB controller feature, while the USB Host max3421e supports the communication process using SPI, so that those two microcontrollers can be used to form an interface using the SPI bus. This interface can be applied to electronic equipment with old technology and entry level electronic equipment for wireless communication. For the needs of making an interface between the ESP32 and max3421e, a software was developed by analyzing the SPI features of the ESP32 and the USB protocol according to the USB device state diagram. The results obtained are the handshake process between systems developed with USB devices in the Low-Speed ​​and Full-Speed ​​categories such as printers, flashdisk, bluetooth mouse and external hard disk, and the device descriptor data of each device tested can be read properly.
APA, Harvard, Vancouver, ISO, and other styles
3

Cupiał, Michał, Bogdan Kulig, and Vladimír Pačuta. "URwaga software as interface for measuring devices." E3S Web of Conferences 132 (2019): 02001. http://dx.doi.org/10.1051/e3sconf/201913202001.

Full text
Abstract:
The paper presents computer program URwaga which operates measuring devices at the test stand. The program runs devices that communicate via RS232 interface and devices that are connected to a computer via USB. The obtained data are collected in a cumulative table and then exported to a spreadsheet. The program is applied in the studies on agriculture and mechanical engineering. The application cooperates with factory installations and an original measuring system on Arduino platform.
APA, Harvard, Vancouver, ISO, and other styles
4

Yang, Guang You, Li Peng Chen, Zhi Yan Ma, and Zheng Zhang. "Research on Workshop Equipment Information Transmission Based on Wireless Sensor Network." Key Engineering Materials 579-580 (September 2013): 719–24. http://dx.doi.org/10.4028/www.scientific.net/kem.579-580.719.

Full text
Abstract:
In order to avoid the cumbersome wiring, limited transmission distance, high power consumption and high cost etc when using cables to transmit data in production workshops, a data transmission system combining ZigBee with USB is researched in this paper. The system hardware adopts the structure of wireless MCU CC2430 and USB interface chip CH372, the software uses the ZigBee2006 protocol stack and the USB2.0 protocol. The paper presents the hardware architecture and principle of the system and analyzes the program design of the upper and lower machines. The laboratory test results indicate that data can be transmitted from any PC to the specified one stably through ZigBee multi-hop network and the USB bus. The implementation of the experiment system has laid the foundation for the wireless data transmission between workshop equipment.
APA, Harvard, Vancouver, ISO, and other styles
5

Fu, Xiao Guang, and Xiao Jun Wang. "Design and Realization of the Data Collecting System Based on USB Bus Line." Key Engineering Materials 428-429 (January 2010): 440–43. http://dx.doi.org/10.4028/www.scientific.net/kem.428-429.440.

Full text
Abstract:
Universal serial bus (USB) is a kind of new bus interface specification, whose characteristics are convenience, high speed, easiness to expand, low cost and low disturbance, etc. So it is extremely fit to be the communication interface between host computer and peripherals. This paper is mainly about the development of data collecting system based on of USB, including hardware design, firmware design, equipment driver programming and application software design based on Windows driver model (WDM). This system works stable. Both the sampling precision and the data transmission speed have reached expected effect.
APA, Harvard, Vancouver, ISO, and other styles
6

Zhang, Yan Jun, Wen Sheng Qiao, and Jin Ling Wang. "The Design Proposal Aerospace Electronic Test Equipment Based on Multi-Interface Data Communication." Applied Mechanics and Materials 336-338 (July 2013): 3–8. http://dx.doi.org/10.4028/www.scientific.net/amm.336-338.3.

Full text
Abstract:
In the background of requirement which apply in aerospace remote measurement electronic equipment, a new requirement for the universal degree to the remote measurement system is proposed. This paper design communicating solutions of the multi-interface device, hardware circuit,FPGA as the core logic controller, coordinating RS-422 interface chip, Ethernet controller W5300,USB-FIFO,FT245 interface chip and other functional modules. The communication equipment has a variety of interfaces; achieve the reliability of transmission of high data rate. This has been applied for engineering practice and improves the efficiency of the design of the remote measurement equipment and maintenance.
APA, Harvard, Vancouver, ISO, and other styles
7

Zhang, Ran. "A Portable Embedded Data Acquisition and Communication System." International Journal of Advanced Pervasive and Ubiquitous Computing 4, no. 4 (October 2012): 1–6. http://dx.doi.org/10.4018/japuc.2012100101.

Full text
Abstract:
The data acquisition equipment is very useful and popular equipment in agriculture and the other fields. This paper introduces the design of a portable data acquisition and communication system used in cropland. It collect signals of various analog and digital sensors, GPS space and time data, saving data by USB interface and transmission through WCDMA or Bluetooth. The key technology of the system is the use of embedded microprocessor (ARM), Linux Operating system and WCDMA wireless communication. This paper mainly analyzed the basic principle, hardware interface and software flow chart of this system.
APA, Harvard, Vancouver, ISO, and other styles
8

Cui, Yuan, and Bo Nian Li. "A Multimedia System Based on OMAP3530." Applied Mechanics and Materials 40-41 (November 2010): 506–9. http://dx.doi.org/10.4028/www.scientific.net/amm.40-41.506.

Full text
Abstract:
JPEG images decoded and encoded rapidly and effectively based on OMAP3530 chip. USB camera deployed as images’ acquisition equipment, and used the ARM + DSP multi-core OMAP3530 processor as image decode-encode processing chip. The results sent to the user interface ultimately. System’s development was based on DVSDK. The result proved system fast than others.
APA, Harvard, Vancouver, ISO, and other styles
9

Santos, José, and Pedro Ramos. "DSPIC-Based Impedance Measuring Instrument." Metrology and Measurement Systems 18, no. 2 (January 1, 2011): 185–98. http://dx.doi.org/10.2478/v10178-011-0002-0.

Full text
Abstract:
DSPIC-Based Impedance Measuring Instrument An implemented impedance measuring instrument is described in this paper. The device uses a dsPIC (Digital Signal Peripheral Interface Controller) as a processing unit, and a DDS (Direct Digital Synthesizer) to stimulate the measurement circuit composed by the reference impedance and the unknown impedance. The voltages across the impedances are amplified by programmable gain instrumentation amplifiers and then digitized by analog to digital converters. The impedance is measured by applying a seven-parameter sine-fitting algorithm to estimate the sine signal parameters. The dsPIC communicates through RS-232 or USB with a computer, where the measurement results can be analyzed. The device also has an LCD to display the measurement results.
APA, Harvard, Vancouver, ISO, and other styles
10

Chen, Ce, Shao Cai Zhao, Yong Hu, and Guo Kai He. "Design and Realization of Universal Integrated Testing Platform for Equipment-Embedded Software." Applied Mechanics and Materials 635-637 (September 2014): 1175–78. http://dx.doi.org/10.4028/www.scientific.net/amm.635-637.1175.

Full text
Abstract:
An universal testing platform for equipment-embedded software is designed and realized to support the dynamic verification test of embedded software on CI level and system level. This Platform, based on LAN and USB bus architecture, has provided the function of system interface modelling, test project management, test case script code, test result control and analysis, and test report generation, and is available for real time, closed-loop and non-invasive dynamic testing on the embedded software with the characteristic of portability, easy operation, flexibility in size configuration and universality of protocol description.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Measuring equipment with USB interface"

1

Skopalík, Daniel. "Tester tranzistorů připojitelný přes USB." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2018. http://www.nusl.cz/ntk/nusl-377346.

Full text
Abstract:
This thesis describe development and realization of transistor tester based on AtMega microcontroller. Developed equipment should be used by DIY users or students in university workshop to verify transistor functionality and measure basic characteristics. Equipment should be easily manufacturable in a piece quantity with reasonable costs.
APA, Harvard, Vancouver, ISO, and other styles
2

Klezla, Petr. "Měřicí karta pro PC s I51." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-217845.

Full text
Abstract:
The main topic of the thesis is to suggest and realize the measuring card with analog inputs and outputs. In the first part of this thesis we are concerned with key-elements of measuring cards, respectively ADC and DAC, and here are explained all their activities. Then we attend of choosing parts for suggested measuring card as is voltage reference, power supply and operational amplifier. Among others we are concerned with a question of protecting inputs against overvoltage and reversing of polarity and beside against disturbance. Then follows analysis of used microcontroller ADUC831 with description of its used outskirts. Here is described the stored for measured samples of MMC memory, how to work with it and the programme service. The last chapter describes suggested firmware and servicing programme for PC. In fine we value the quality of measuring card and its mistakes.
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Measuring equipment with USB interface"

1

Butler, J. Kent, and Robert Neshta. "An Interface Standard for Communicating Between Dimensional Measuring Equipment and CAD Data Bases." In Robotics and Factories of the Future ’87, 152–58. Berlin, Heidelberg: Springer Berlin Heidelberg, 1988. http://dx.doi.org/10.1007/978-3-642-73890-6_20.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

M. Boland, Hannah, Morgan I. Burgett, Aaron J. Etienne, and Robert M. Stwalley III. "An Overview of CAN-BUS Development, Utilization, and Future Potential in Serial Network Messaging for Off-Road Mobile Equipment." In Technology in Agriculture [Working Title]. IntechOpen, 2021. http://dx.doi.org/10.5772/intechopen.98444.

Full text
Abstract:
A Controller Area Network (CAN) is a serial network information technology that facilitates the passing of information between Electronic Control Units (ECUs, also known as nodes). Developed by BOSCH in 1986 to circumvent challenges in harness-connected systems and provide improved message handling in automobiles, the CAN interface allows broadcast communication between all connected ECUs within a vehicle’s integrated electronic system through distributed control and decentralized measuring equipment. Since the early uses of CAN in car engine management, improvements in bitrate, bandwidth, and standardization protocols (such as ISO 11898 and SAE J1939) have led to CAN utilization in various industry applications, such as factory automation, aviation, off-highway vehicles, and telematics. Alternative wired and wireless technologies have been used to connect and network with CAN-BUS (such as Ethernet, Bluetooth, Wi-Fi, ZigBee, etc.), further expanding the diversity of applications in which the serial network is employed. In this chapter, the past, present, and prospective future developments of CAN technology, with focused attention on applications in the agricultural and off-road sectors are broadly examined. CAN technology fundamentals, standards creation, modern day uses, and potential functionalities and challenges specific to CAN in the wake of precision agriculture and smart farming are discussed in detail.
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Measuring equipment with USB interface"

1

Li, Deshi, Jian Chen, and Yadong Wu. "Device USB interface and software development for electric parameter measuring instrument." In Fifth International Symposium on Instrumentation and Control Technology, edited by Guangjun Zhang, Huijie Zhao, and Zhongyu Wang. SPIE, 2003. http://dx.doi.org/10.1117/12.521987.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Zhao, Xiaoshun, Huali Yu, and Shuxia Lui. "Research on Intelligent Temperature and Humidity Memory Instrument Based on USB Interface." In 2009 International Conference on Measuring Technology and Mechatronics Automation. IEEE, 2009. http://dx.doi.org/10.1109/icmtma.2009.75.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Greener, Derek. "Intelligent Pressure Measurement for Turbo Machinery Applications." In ASME 1996 International Gas Turbine and Aeroengine Congress and Exhibition. American Society of Mechanical Engineers, 1996. http://dx.doi.org/10.1115/96-gt-101.

Full text
Abstract:
Multiple pressure data acquisition has typically consisted of hundreds of pipes connected via a test-bed interface to mechanical multiplexers and/or to groups of electronically scanned sensors. This paper describes a new method of high speed digital pressure scanning with intelligent pressure modules and its consequent impact on turbine testing methods and working practices. Also discussed is the remote calibration of modules and the concept of pre-rig or build shop connecting pressure tappings direct to the test measuring equipment, thus reducing commissioning, calibration and down time on the test-bed.
APA, Harvard, Vancouver, ISO, and other styles
4

Guan, Weihe, Changzhou Yan, Yuanhong Tao, and Xuedong Chen. "Experimental Research and Application of UT Inspection Method for Detection of Defects on Pressure Vessels and Pipelines Under High-Temperature Environment." In ASME 2006 Pressure Vessels and Piping/ICPVT-11 Conference. ASMEDC, 2006. http://dx.doi.org/10.1115/pvp2006-icpvt-11-94045.

Full text
Abstract:
High temperature UT inspection techniques can be used to conduct random inspection on line on the key locations of pressure vessels and pipelines in operation so as to find out fresh defects in time and determine inspection time. It can also be used for real-time monitoring and control of defect-containing pressure vessels and pipelines and provide a basis for safety assessment of equipment so as to ensure safe operation of pressure vessels and pipelines. The propagation velocity of ultrasonic wave in metallic pressure-bearing equipment and its amplitude vary with temperature, therefore, the factors that influence UT inspection ability and measuring accuracy will be increased. In this paper the variation in sound velocity and attenuation law of ultrasonic shear wave in common pressure vessels and pipelines in the range of room temperature ∼ 450 °C is studied, the sound velocity decreases linearly as temperature rises and the attenuation coefficient α decreases as temperature rises, from 0.006 dB/mm at room temperature to 0.08dB/mm at 450 °C. The factors that influence inspection accuracy of ultrasonic shear wave are discussed, including variation in sound velocity, loss in interface sound pressure, thermal expansion, and so forth. The method for detection of weld defects within above temperature range using the ultrasonic shear wave is established, including scanning manner, measurement of defect height and length and their position correction, and so forth. The present situation of online high-temperature UT inspection technology for pressure vessels and pipelines in China is summarized through online UT inspection examples of petrochemical equipment under local high-temperature environment.
APA, Harvard, Vancouver, ISO, and other styles
5

Qi, Junliang, Ligong Lv, Zhiyong Su, Chao Liu, Hui Shen, and Yong Luo. "Single Point Mooring FPSO Monitoring and Forecast System Design." In ASME 2014 33rd International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/omae2014-23734.

Full text
Abstract:
The proposed paper is going to address the development of single point mooring FPSO (Floating Production, Storage and Offloading) monitoring and forecast system design. With 17 FPSOs deployed in both Bohai Bay and South China Sea, CNOOC owns one of the largest FPSO fleet in the world. Most of those FPSOs have been or will be moored to the seabed for decades. The extreme response during storm conditions could cause serious environmental problem, asset loss, personnel safety etc. In order to timely understand the tanker operation conditions and avoid potential risk of system failure when experiencing hurricanes, a monitoring and forecast system is developed for FPSO to monitor the environment conditions, tanker motions, green water, mooring tensions, FPSO heading and to predict the extreme mooring tensions and global motions before typhoon coming. The forecast system could further suggest the optimum loading condition for minimizing the extreme mooring tension and tanker motions to enhance the safe operation. In this paper, we take the Internal Turret Mooring FPSO 111 and the Submerged Soft Yoke Mooring FPSO 112 as the examples to introduce the design technology of the system. Through the integrated onboard interface information, the personnel could proactively take actions to mitigate the tensions on mooring lines and vessel motions. Furthermore, the measured mooring line tension, motion and environment history could assist the numerical studies of global performance. The details of designing or selecting the measuring and monitoring equipment, theory background of forecast system and the integrated onboard interface will be described.
APA, Harvard, Vancouver, ISO, and other styles
6

Kyrkjebo̸, Erik, Pa˚l Liljeba¨ck, and Aksel A. Transeth. "A Robotic Concept for Remote Inspection and Maintenance on Oil Platforms." In ASME 2009 28th International Conference on Ocean, Offshore and Arctic Engineering. ASMEDC, 2009. http://dx.doi.org/10.1115/omae2009-79702.

Full text
Abstract:
This paper presents a novel concept for remote inspection and maintenance operations on next generation normally-unmanned offshore oil platforms. The concept is presented through the design of a robotic lab facility for automated and teleoperated inspection and maintenance operations by robot manipulators — ranging from simple inspection tasks to advanced maintenance operations. The lab facility is built around two cooperating robot manipulators equipped with sensors measuring temperature, vibrations, gas concentration and sound, and that automatically changes between tools to operate valves, exchange batteries in wireless sensors and to manipulate objects and the integrated process equipment. A graphical interface allows users to start automated inspection rounds where sensor data are collected, analyzed and compared to normal operating conditions, and alarms are generated if deviations are detected. Users may also plan new operations in a virtual environment before executing them, or remotely control the robots through a number of control interfaces. Live video feeds and stereoscopic vision are available to aid the operator during remote operations. A model-based collision avoidance system ensures that both automated operations and unplanned operations are verified before and during execution, and ensures safe operation of the robots. The paper presents results from the lab facility to illustrate the functionality of the remote inspection and maintenance concept, and demonstrate how remote operators may start automatic inspection and maintenance operations, plan new operations in a virtual environment, or directly control the remote facility onshore.
APA, Harvard, Vancouver, ISO, and other styles
7

Kaye, Alwyn. "Investigation and Resolution of the Fluid Structure Interaction of High Rate HVGO Pumps." In ASME 2020 Pressure Vessels & Piping Conference. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/pvp2020-21203.

Full text
Abstract:
Abstract A suite of High Rate Heavy Vacuum Gas Oil (HVGO) pumps in an operating Upgrader Plant experienced repeated failures; typically, less than 7 weeks. The need for online measuring tools arose that could measure pump and piping system strain changes with dynamic thermal gradients. The challenge was to record the effect on the entirety of pump component alignment and vibration. In current industrial practices no such tools and techniques are directly and comprehensively available for rotary equipment. Strain gauges are not accurate, and cannot provide broader real time strain mapping. Optical metrology can analyze the mechanical properties and behavior of all kinds of materials in various test scenarios. To date such methods are experimental and principally found in advanced application environments. At the time the method was unknown and especially in such a difficult industrial plant. In such a complex and extreme hot and cold operating service warm-up, cooling, with variations in flow and temperature, can directly and dynamically affect strain measurements. It was not certain whether optical meorology measurement techniques would be able to identify and correlate dynamic operating scenarios with the source of the pump and pipe hardware issues experienced in these Heavy Vacuum Gas Oil (HVGO) pump systems. The influence of the casing thickness and stiffness on the resulting vibration characteristics was investigated by using FEA and operational testing and dynamic analysis. Increasing the interface web thickness results in notable reduction in deformation. Comparison of the results of the live testing against the initial design was performed and studied for remedial action. Materials and heat treatment options were also evaluated and reported. The three-dimensional turbulent flow was modelled and analyzed. The application of those tools for this type of problem are described along with the other rigorous techniques employed. The range of tools included modal and vibration analysis, thermography, rotor and shaft dynamics, baseplate, frame, metallurgical analysis and ultimately compared with FEA, pipe stress modelling and strain analysis. This paper should be read in conjunction with PVP 2020-21204; Piping & Equipment Dynamics of High Rate HVGO Pumps.
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Measuring equipment with USB interface' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography