Relevant bibliographies by topics / Mechanical cleaning

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Mechanical cleaning'

Author: Grafiati
Published: 4 June 2021
Last updated: 25 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Mechanical cleaning.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Mechanical cleaning"

1

International, Journal of Medical Science and Innovative Research (IJMSIR). "A Blessing for Geriatric Beverage Enthusiast - Mechanical and Chemical Resin Cleaner." International Journal of Medical Science and Innovative Research (IJMSIR) 9, no. 4 (2024): 20–40. https://doi.org/10.5281/zenodo.15422236.

Full text
Abstract:
<strong>Abstract</strong> <strong>Introduction</strong><strong>:</strong> This in vitro study evaluates and compares three denture cleansing methods in the removal of tea, coffee stains from conventional and high impact polymethylmethacrylate heat cured denture base acrylic resin.&nbsp;&nbsp;&nbsp; <strong>Materials &amp; Method</strong><strong>:</strong> Two types of denture base acrylic resins were polymerized into 360 specimens, 30x8x2mm dimension each. Samples were treated with 300ml artificial saliva and distilled water and air dried. Beverage decoction was prepared for sample staining us
APA, Harvard, Vancouver, ISO, and other styles
2

Duan, Jinhong, He Gan, Quanzhang Yu, and Yun Chen. "Mechanical smart cleaning table." Journal of Physics: Conference Series 1748 (January 2021): 062013. http://dx.doi.org/10.1088/1742-6596/1748/6/062013.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Goossens, A. M., V. E. Calado, A. Barreiro, K. Watanabe, T. Taniguchi, and L. M. K. Vandersypen. "Mechanical cleaning of graphene." Applied Physics Letters 100, no. 7 (2012): 073110. http://dx.doi.org/10.1063/1.3685504.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Khazil, Dr Aseel S., Dr Areeg S. Ahmed, and Dr Mohammed F. Mutlak. "Modification of some denture cleaning agents employed with mechanical cleansing methods." Mustansiria Dental Journal 7, no. 1 (2018): 113–25. http://dx.doi.org/10.32828/mdj.v7i1.387.

Full text
Abstract:
The present study was carried out to investigate the effect of 5 cleaning agents(dettol soap, whitening tooth paste, sodium bicarbonate powder, and ethanol handsanitizer gel and siwak powder) on color alteration of heat-polymerized acrylic resinand to compare it with that of distilled water. 60 specimen strips of heat-polymerizedacrylic resin material were prepared measuring 5mm width, 40mm length and 2mmthickness; five specimens were used for each group. After two weeks of immersion intea solution, the light transmission percent value for each specimen was determined at400nm and 700nm wave le
APA, Harvard, Vancouver, ISO, and other styles
5

Alweneen, Athar, and Nasser Alqahtani. "The Effectiveness of Different Cleaning Methods for Clear Orthodontic Aligners: Impacts on Physical, Mechanical, and Chemical Properties—An In Vivo Study." Polymers 17, no. 12 (2025): 1620. https://doi.org/10.3390/polym17121620.

Full text
Abstract:
Maintaining the cleanliness of orthodontic aligners is crucial for oral hygiene and preserving the optical properties of aligners. In this randomized clinical trial, we compared the effectiveness of different cleaning methods for the maintenance of Invisalign clear aligners. Twelve adult patients received five aligners, each worn for 10 days. The aligners were divided based on the cleaning method: tooth brushing with whitening toothpaste, vinegar, Fittydent Super Cleansing Tablets, Invisalign cleaning crystals, and only water. Scanning electron microscopy (SEM) was used to detect surface morph
APA, Harvard, Vancouver, ISO, and other styles
6

Gyonouchi, Yukio. "CleanLine―The Complete Fabric Cleaning." JAPAN TAPPI JOURNAL 73, no. 5 (2019): 425–29. http://dx.doi.org/10.2524/jtappij.73.425.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Melisa, Melisa. "Telaah Pustaka: Berbagai Metode dan Bahan Pembersihan Gigi Tiruan Lepas." STOMATOGNATIC - Jurnal Kedokteran Gigi 20, no. 1 (2023): 38. http://dx.doi.org/10.19184/stoma.v20i1.38598.

Full text
Abstract:
Cleaning of removable dentures is an important step to prevent cross-contamination and contribute to the health of the patient, the lifespan of the dentures, and the patient's overall quality of life. Bad dentures have undesirable effects such as bad breath, stains and biofilms, and calculus accumulation in the dentures which can lead to denture stomatitis, angular cheilitis, and poor oral health. A dentist is responsible for educating the patient after denture insertion so it will increase the knowledge of the denture wearer how to maintain the cleanliness of the denture properly. There are t
APA, Harvard, Vancouver, ISO, and other styles
8

Hrudz, V. Ya, and N. B. Slobodian. "The Optimal Periodicity of the Gas Transmission Systems Cleaning." Prospecting and Development of Oil and Gas Fields, no. 4(73) (December 30, 2019): 85–90. http://dx.doi.org/10.31471/1993-9973-2019-4(73)-85-90.

Full text
Abstract:
The technical and economic aspects of improving the hydraulic efficiency of pipeline transmission are considered. Hydraulic efficiency of gas transmission systems reveals directly their economic efficiency and practicability, as well as the process of "aging" of the main gas pipelines over time. One of the effective methods of improving the hydraulic efficiency of a gas pipeline is its periodical cleaning with the use mechanical cleaning units. The process of cleaning gas transmission systems with cleaning pistons is technologically complicated and expensive. Therefore, when planning, it is ne
APA, Harvard, Vancouver, ISO, and other styles
9

Bel-Berger, Patricia, and Terri Von Hoven. "Effects of Mechanical Cleaning on Cotton Fibers: Part III: Effects of Card Wire Condition on White Specks." Textile Research Journal 67, no. 12 (1997): 857–65. http://dx.doi.org/10.1177/004051759706701201.

Full text
Abstract:
Combinations of gin and mill cleaning sequences have been studied to determine the best way to clean both smooth-leaf and hairy-leaf cottons. The two varieties were subjected to four different levels of lint cleaning at the gin, followed by nine different mill cleaning sequences, for a total of thirty-six samples. All samples were tested for fiber properties (Part II), yarn strength, and fabric strength and appearance. The yarn and fabric properties are reported in this paper. In the middle of the study, the card wire was damaged and subsequently replaced, which presented the opportunity to de
APA, Harvard, Vancouver, ISO, and other styles
10

Zhou, Kan, Shuguang Sang, Chengyu Wang, and Yihua Zhou. "Principle, application and development trend of laser cleaning." Journal of Physics: Conference Series 2383, no. 1 (2022): 012075. http://dx.doi.org/10.1088/1742-6596/2383/1/012075.

Full text
Abstract:
Many areas of industrial production are inseparable from cleaning technology, and traditional cleaning technology is increasingly unable to meet the requirements of modern industry. Laser cleaning technology is a new cleaning technology with high efficiency and no chemical pollution. It has the characteristics of non-contact, environmental protection, high efficiency, flexibility, energy saving and wide application range. Compared with mechanical friction cleaning, chemical corrosion cleaning, ultrasonic cleaning, dry ice cleaning and other technologies, it has obvious advantages. At present,
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Mechanical cleaning"

1

Ng, Dedy. "Nanoparticles removal in post-CMP (Chemical-Mechanical Polishing) cleaning." Thesis, Texas A&M University, 2005. http://hdl.handle.net/1969.1/4159.

Full text
Abstract:
Research was performed to study the particle adhesion on the wafer surface after the chemical-mechanical polishing (CMP) process. The embedded particles can be abrasive particles from the slurry, debris from pad material, and particles of film being polished. Different methods of particle removal mechanism were investigated in order to find out the most effective technique. In post-CMP cleaning, surfactant was added in the solution. Results were compared with cleaning without surfactant and showed that cleaning was more effective with the combined interaction of the mechanical effort from the
APA, Harvard, Vancouver, ISO, and other styles
2

Palabiyik, Ibrahim. "Investigation of fluid mechanical removal in the cleaning process." Thesis, University of Birmingham, 2013. http://etheses.bham.ac.uk//id/eprint/4593/.

Full text
Abstract:
The cleaning of pipework from fluids of high viscosity is a significant problem in many food and personal care industries which can cause considerable economic and environmental impact. Three stages are identified in the cleaning of straight pipes; (i) a short core removal stage of product recovery, before water breaks through the filled pipe, (ii) the 1st cleaning stage (film removal stage) when there is a continuous wavy annular film on the wall, and (iii) the 2nd cleaning stage (patch removal stage) in which the material is present as patches on the wall. The product recovery stage is found
APA, Harvard, Vancouver, ISO, and other styles
3

Rajendran, Nikith. "Surface mounted PCB cleaning process improvement and Its impact on manufacturing system performance." Thesis, Massachusetts Institute of Technology, 2011. http://hdl.handle.net/1721.1/69491.

Full text
Abstract:
Thesis (M. Eng.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2011.<br>Cataloged from PDF version of thesis.<br>Includes bibliographical references (p. 87-88).<br>In the surface mount technology (SMT) assembly line, the printed circuit boards (PCB) are washed to remove the solder flux that was used while soldering to prevent oxidation. However the current cleaning method is highly ineffective in removing these solder flux residues. The solder flux residues cause many problems like electro-migration, improper mold underfill and increase the chances of failure. This p
APA, Harvard, Vancouver, ISO, and other styles
4

Kaushik, Adithya. "Development of Cleaning Robot for Trench Drains." University of Cincinnati / OhioLINK, 2019. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1573569385569481.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Ingmire, Jennifer Joan. "Cleaning up the future with an autonomous space processor for orbital debris." Thesis, The University of Arizona, 1995. http://hdl.handle.net/10150/278519.

Full text
Abstract:
In 1957, the space race began with the launch of Sputnik. The Soviet Union and the United States fought to be the first to place an object in earth orbit, to maintain it in orbit the longest, and eventually to land humans on the moon. During this time of competition, nothing was done to remove the spent objects or man-made debris from orbit. In recent years, man has become interested in the environment and the effects of his actions on it. This environmental consciousness has begun to extend to NASA and the space program. NASA has realized that the amount of orbited space debris around the ear
APA, Harvard, Vancouver, ISO, and other styles
6

Mukherjee, Ishan. "Cleaning process development and optimization in the surface mount assembly line of power modules." Thesis, Massachusetts Institute of Technology, 2011. http://hdl.handle.net/1721.1/69490.

Full text
Abstract:
Thesis (M. Eng.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2011.<br>Cataloged from PDF version of thesis.<br>Includes bibliographical references (p. 83-84).<br>The cleaning process in the surface mount assembly line of power modules had been found to insufficiently remove solder flux residue from printed circuit board (PCB) assemblies after the process of reflow soldering. This thesis details the development of an optimized cleaning process that effectively removes solder flux residue from PCB assemblies. The first stage of this study involves the experimental va
APA, Harvard, Vancouver, ISO, and other styles
7

Jung, Yong Chae. "Natural and Biomimetic Artificial Surfaces for Superhydrophobicity, Self-Cleaning, Low Adhesion, and Drag Reduction." The Ohio State University, 2009. http://rave.ohiolink.edu/etdc/view?acc_num=osu1258574648.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Lütkenhaus, Davidson. "Engineering understanding of cleaning : effect of chemistry and mechanical forces on soil removal." Thesis, University of Birmingham, 2017. http://etheses.bham.ac.uk//id/eprint/7929/.

Full text
Abstract:
The cleaning of food-based soils is highly relevant in domestic and industrial environments due to the costs associated with these operations as well as the significant consumption of time, water, and energy. Understanding the relationship between chemical and mechanical forces required to clean a surface is a critical step towards optimizing these processes. A complex twophase polymerized grease was developed and characterized with respect to its morphology, component distribution, and chemical composition. A thorough evaluation and physicochemical characterization of the cleaning process of
APA, Harvard, Vancouver, ISO, and other styles
9

Metlitz, Matthew S. "Design for an invertible water bottle to facilitate cleaning and promote sustainable water bottle usage." Thesis, Massachusetts Institute of Technology, 2014. http://hdl.handle.net/1721.1/92200.

Full text
Abstract:
Thesis: S.B., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2014.<br>Cataloged from PDF version of thesis.<br>Includes bibliographical references (pages 57-58).<br>The goal of this thesis is to explore the design of a reusable water bottle that can be inverted to expose the inside. Being able to directly touch the entire inside of the product could facilitate cleaning and consequently promote sustainable water bottle usage. Existing cleaning solutions and various water bottles were evaluated for benchmarking, and a water bottle usage survey revealed that most res
APA, Harvard, Vancouver, ISO, and other styles
10

Morgan, Harith. "Design of a mechanism to increase lateral force resistance of an autonomous ship hull cleaning robot." Thesis, Massachusetts Institute of Technology, 2020. https://hdl.handle.net/1721.1/127897.

Full text
Abstract:
Thesis: S.B., Massachusetts Institute of Technology, Department of Mechanical Engineering, May, 2020<br>Cataloged from the official PDF of thesis.<br>Includes bibliographical references (page 27).<br>Marine biofoul accrues on ship hulls and increases the resistance of a ship during voyage. This is a widespread issue within the shipping an industry -- which supports the vast majority of global trade. To address this problem, we are developing Bio-Inspired HullCrawler -- an autonomous robot capable of cleaning ship hulls while a ship is underway. The novelty of our design centers on the bio-insp
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Mechanical cleaning"

1

International, ASM, ed. Guide to mechanical cleaning systems. ASM International, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Harrington, Joe. Industrial Cleaning Technology. Springer Netherlands, 2001.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

LeBeau, Scott. Closed loop aqueous cleaning of mechanical parts: Lockheed Martin Defense Systems, Pittsfield, Massachusetts. Toxics Use Reduction Institute, University of Massachusetts Lowell, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Biermann, Don. How to save money and save energy. D. Biermann Energy Conservation Co., 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Liu, Jintian. Characterisation of the Mechanical Properties of Heat-Induced Protein Deposits in Immersed Cleaning Systems. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-21849-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Breault, Robert F. Residential street-dirt accumulation rates and chemical composition, and removal efficiencies by mechanical- and vacuum-type sweepers, New Bedford, Massachusetts, 2003-04. U.S. Dept. of the Interior, U.S. Geological Survey, 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Breault, Robert F. Residential street-dirt accumulation rates and chemical composition, and removal efficiencies by mechanical- and vacuum-type sweepers, New Bedford, Massachusetts, 2003-04. U.S. Dept. of the Interior, U.S. Geological Survey, 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Breault, Robert F. Residential street-dirt accumulation rates and chemical composition, and removal efficiencies by mechanical- and vacuum-type sweepers, New Bedford, Massachusetts, 2003-04. U.S. Dept. of the Interior, U.S. Geological Survey, 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Breault, Robert F. Residential street-dirt accumulation rates and chemical composition, and removal efficiencies by mechanical- and vacuum-type sweepers, New Bedford, Massachusetts, 2003-04. U.S. Dept. of the Interior, U.S. Geological Survey, 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Breault, Robert F. Residential street-dirt accumulation rates and chemical composition, and removal efficiencies by mechanical- and vacuum-type sweepers, New Bedford, Massachusetts, 2003-04. U.S. Dept. of the Interior, U.S. Geological Survey, 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Mechanical cleaning"

1

Siembida-Lösch, Barbara. "Mechanical Cleaning." In Encyclopedia of Membranes. Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-642-40872-4_1703-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

de Larios, John. "CMP Cleaning." In Chemical-Mechanical Planarization of Semiconductor Materials. Springer Berlin Heidelberg, 2004. http://dx.doi.org/10.1007/978-3-662-06234-0_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kuchař, Jiří, and Viktor Kreibich. "Cleaning of Internal Surfaces." In Lecture Notes in Mechanical Engineering. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-16943-5_51.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Jaswal, Ashish, and Manoj Kumar Sinha. "A Review on Solar Panel Cleaning Through Chemical Self-cleaning Method." In Lecture Notes in Mechanical Engineering. Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-15-8542-5_73.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

De Deus, Gustavo, Emmanuel J. N. L. Silva, Erick Souza, et al. "Reciprocating Movement: Mastering the Mechanical Preparation." In Shaping for Cleaning the Root Canals. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-84617-6_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Burman, Vibha, and Ravinder Kumar. "IoT-Enabled Automatic Floor Cleaning Robot." In Lecture Notes in Mechanical Engineering. Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-15-9678-0_60.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Losev, Alexey, Igor Bychkov, Anna Selezneva, Vira Shendryk, and Sergii Shendryk. "Cleaning of Parts with Detonating Gas Mixtures." In Lecture Notes in Mechanical Engineering. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-91327-4_58.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Gorade, Unmesh, Din Bandhu, Soni Kumari, Jagat Rath, and Kumar Abhishek. "Design of Bluetooth-Controlled Floor Cleaning Robot." In Recent Advances in Mechanical Infrastructure. Springer Singapore, 2022. http://dx.doi.org/10.1007/978-981-16-7660-4_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Luhovska, Katerina, Andrey Movchanuk, Volodymyr Feshich, and Alina Shulha. "Technology of Ultrasonic Cavitation Cleaning of Elastic Surfaces." In Lecture Notes in Mechanical Engineering. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-59509-8_23.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Kramer, Lina, Daniel Fuhrländer-Völker, Magnus von Elling, Sebastian Karnapp, Maximilian Moser, and Matthias Weigold. "OPC UA Information Model for Energy-Flexible Aqueous Parts Cleaning Machines." In Lecture Notes in Mechanical Engineering. Springer Nature Switzerland, 2025. https://doi.org/10.1007/978-3-031-93891-7_18.

Full text
Abstract:
Abstract To reduce carbon emissions, renewable energies are being integrated into power grids worldwide, but their inherent volatility leads to overproduction or underproduction of electricity. Besides using costly electrical storage, supply and demand can be synchronized utilizing energy flexibility of industrial consumers. Industrial aqueous parts cleaning machines have significant potential for energy-flexible operation. VDI 5207 suggests various energy flexibility measures, such as utilizing the inherent storage capacities of rinsing tanks. This paper introduces an energy synchronization p
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Mechanical cleaning"

1

Al-Darwish, H. M., S. A. Al-Dossary, and N. M. Al-Abdulmohsin. "Chemical and Mechanical Cleaning Case Study." In CORROSION 2017. NACE International, 2017. https://doi.org/10.5006/c2017-09311.

Full text
Abstract:
Abstract This paper outlines a study to assess existing mechanical and chemical cleaning techniques in oil processing plants, natural gas liquid (NGL), and utility facilities. The cleaning assessment covered the major equipment at crude stabilization unit such as stabilizer columns, fin-fan coolers, reboilers, storage tanks, spheroids, NGL stripper/deethanizer columns, NGL reboilers, NGL coolers &amp; Combinaires’ tubes, oily water sump pits (OWS), and steam boilers. The core objective of this study is to summarize the methodologies and results of the conventional cleaning methods and the alte
APA, Harvard, Vancouver, ISO, and other styles
2

Reinhardt, M., and G. Lewis. "Full Bundle Mechanical Cleaning of Pressurized Water Reactor Steam Generators." In CORROSION 1998. NACE International, 1998. https://doi.org/10.5006/c1998-98331.

Full text
Abstract:
Abstract An improved system for cleaning the upper bundle region of pressurized water reactor steam generators is now available. This system employs high pressure water jets to remove sludge and scale from tube and support plate surfaces and from the broach holes throughout the upper bundle region of steam generators. Benefits of sludge removal can include mitigation of the corrosion process, improvement of plant performance and increased operational stability. The cleaning equipment is installed through existing handholes in the tubesheet region and accesses the upper bundle through flow slot
APA, Harvard, Vancouver, ISO, and other styles
3

Balan, Kumar. "Advances in Mechanical Surface Preparation." In SSPC 2012 Greencoat. SSPC, 2012. https://doi.org/10.5006/s2012-00003.

Full text
Abstract:
Abstract The coatings industry is very familiar with shot/grit blasting as a mechanical means of surface preparation. Over the years, operators have worked with manual and automatic blast equipment with its associated dust collection arrangements. The industry is highly competitive, and control on operating costs is critical. Therefore, coaters are always on the lookout for ways to tune their process by lowering costs and increasing productivity. An allied process called shot peening can elevate blast cleaning to a more productive level. Shot peening is a technique to strengthen production par
APA, Harvard, Vancouver, ISO, and other styles
4

Caplan, Gary. "Chemical Cleaning Methodologies." In CORROSION 1988. NACE International, 1988. https://doi.org/10.5006/c1988-88224.

Full text
Abstract:
Abstract Deposition in industrial cooling water systems can result in deposit-induced corrosion, reduced heat transfer and loss of product throughput. Both mechanical and chemical cleaning techniques are available for foulant removal. However, this paper focuses on chemical cleaning and more specifically on the key considerations in planning an acid cleaning. Areas of discussion include equipment inspection, deposit analysis, acid selection, spent acid disposal and safety. A checklist is provided to simplify the cleaning task.
APA, Harvard, Vancouver, ISO, and other styles
5

Balan, Kumar. "Advances in Mechanical Surface Preparation." In SSPC 2011. SSPC, 2011. https://doi.org/10.5006/s2011-00004.

Full text
Abstract:
Abstract The coatings industry is very familiar with shot/grit blasting as a mechanical means of surface preparation. Over the years, operators have worked with manual and automatic blast equipment with its associated dust collection arrangements. As with every manufacturing process, operating costs are very critical in this highly competitive industry. Therefore, coaters are always on the lookout for ways to tune their process and increase productivity. Fortunately, blast industry professionals are also exposed to an allied process called shot peening which promises to elevate blast cleaning
APA, Harvard, Vancouver, ISO, and other styles
6

An, Shuangli, and Yilin An. "Research of Garbage Cleaning Robot Based on Deep Learning." In 2024 8th International Conference on Electrical, Mechanical and Computer Engineering (ICEMCE). IEEE, 2024. https://doi.org/10.1109/icemce64157.2024.10862843.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Gay, John M. "The Role of Visual Inspection in Planning for Chemical and Mechanical Cleaning." In CORROSION 1998. NACE International, 1998. https://doi.org/10.5006/c1998-98329.

Full text
Abstract:
Abstract From the beginning, the commercial nuclear power industry has faced many difficult challenges. For the Pressurized Water Reactor (PWR) family, steam generator maintenance and repair costs are paramount. Worldwide, utilities have spent billions of dollars on steam generator inspection and repair due to tube corrosion. Several utilities have replaced steam generators. Recent history has shown that most of the corrosion and fouling takes place on the secondary side of steam generators. Visual inspection tools are now providing much of the information necessary to plan when and what metho
APA, Harvard, Vancouver, ISO, and other styles
8

Gauthier, Claude, and David Lowther. "Remedial Cleaning Methods for Zebra Mussel Removal." In CORROSION 1993. NACE International, 1993. https://doi.org/10.5006/c1993-93368.

Full text
Abstract:
ABSTRACT Plant water systems are at risk from fouling and corrosion caused by zebra mussels. Surfaces of intake structures, system piping and heat exchangers that become infested with zebra mussels require a reliable cleaning method. Either chemical and/or mechanical methods can be used to dissolve or remove zebra mussel in organic "calcite” shells and their organic "proteinaceous" byssal thread attachments. Ontario Hydro Generating station experience and results from different demonstrations are discussed. The following are presented as plant case histories: -In-situ mechanical cleaning progr
APA, Harvard, Vancouver, ISO, and other styles
9

Spurrell, Chris, and Mialeeka Bibbs. "Refinery Chemical Cleaning: Criteria for Detergent Selection." In CORROSION 2000. NACE International, 2000. https://doi.org/10.5006/c2000-00446.

Full text
Abstract:
Abstract Mechanical equipment in the oil processing industry can operate for years between shutdowns. During this time there is often a tendency for scale, debris and sludges to form within this equipment. During the shutdowns these fouling materials have to be removed before mechanical work or even entry can be allowed. Detergents have been developed to speed the cleaning and decontamination of equipment. These detergents alone or in combination with other chemicals such as oxidizing agents have reduced the need for caustic and acid washing of refinery equipment. Detergents, however, can inte
APA, Harvard, Vancouver, ISO, and other styles
10

Sengar, Namrata, and Koushal Shringi. "Comparative Study of Four Transparent Hydrophobic Coatings for Water Saving Potential in Dust Cleaning Context of Solar Power Plants." In 22nd ISME International Conference on Recent Advances in Mechanical Engineering for Sustainable Development. Trans Tech Publications Ltd, 2025. https://doi.org/10.4028/p-bxmjm9.

Full text
Abstract:
Dust deposition may reduce the yield of the PV panels from 10-50% depending upon the amount of dust deposited, particle size and nature. To prevent loss of efficiency of power plant, cleaning of PV panels is generally required in one-two weeks and in summers during dust storms cleaning frequency needs to be increased. Generally, for cleaning de-ionised water is recommended which adds to the cost and even availability of ordinary water for cleaning is a problem with water scarce regions. In the world, most of the high solar potential sites which are ideal for solar PV power plant installation l
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Mechanical cleaning"

1

Petit, Sylvain, Joannie Chin, Amanda Forster, Michael Riley, and Kirk Rice. Effect of artificial perspiration and cleaning chemicals on mechanical and chemical properties of ballistic fibers. National Institute of Standards and Technology, 2008. http://dx.doi.org/10.6028/nist.ir.7494.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Tzonev, Nick, and Eric Pesty. PR-396-113704-R02 Methods for Detection of Gases and VOCs from Floating Roofs of Aboveground Storage Tanks. Pipeline Research Council International, Inc. (PRCI), 2013. http://dx.doi.org/10.55274/r0010794.

Full text
Abstract:
Describes the development of an automated system that can effectively replace the EPA-mandated in-service and out-of-service inspections of the Internal Floating Roofs (IFR) in Aboveground Storage Tanks (ASTs). The ultimate goal is to increase the internal inspection interval to twenty (20) years, which would coincide with the interval used by the American Petroleum Institute's (API) Standard 653 for out-of-service general mechanical inspection of the entire tank. Extending the IFR internal inspection interval will eliminate the negative elements associated with additional AST entry events and
APA, Harvard, Vancouver, ISO, and other styles
3

Tracy, Noel A. Nondestructive Evaluation (NDE) Exploratory Development for Air Force Systems. Delivery Order 0001: Quick Reaction NDE and Characterization--Effects of Chemical Effects of Chemical Etching after Pre-Inspection Mechanical Cleaning on Fluorescent Penetrant Indications of Fatigue Cracks. Defense Technical Information Center, 2011. http://dx.doi.org/10.21236/ada550862.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

On-line mechanical tube cleaning for steam electric power plants. Final report. Office of Scientific and Technical Information (OSTI), 1994. http://dx.doi.org/10.2172/10133970.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Mechanical cleaning' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography