Log in

Relevant bibliographies by topics / Mechaninė sistema / Journal articles

To see the other types of publications on this topic, follow the link: Mechaninė sistema.

Journal articles on the topic 'Mechaninė sistema'

Author: Grafiati

Published: 4 June 2021

Last updated: 14 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Mechaninė sistema.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Illidge-Araujo, JorgeMario, Jorge Luis Chacon Velasco, Angel José Chacon Velasco, and Carlos A. Romero Piehadraita. "Diseño y simulación de un sistema pico-hydro para la generación de energía eléctrica en zonas rurales, mediante un software de mecánica de fluidos computacional." Revista UIS Ingenierías 19, no. 1 (2020): 155–70. http://dx.doi.org/10.18273/revuin.v19n1-2020015.

Full text

Abstract:

En este artículo se presenta un procedimiento para el diseño de todos los componentes de un sistema pico-hydro, a partir de una turbina hidráulica tipo hélice de acuerdo a las condiciones específicas del potencial del agua para un sitio estimado de operación basado en un análisis teórico y técnico. Para este fin, las principales características del rodete se determinan por medio de correlaciones estadísticas de diferentes autores que han estudiado turbinas instaladas alrededor del mundo, y definiendorestricciones para el diseño tales como el salto de la turbina, el caudal nominal y la potencia

APA, Harvard, Vancouver, ISO, and other styles

2

Wastia, Ryan Muthiara. "MEKANISME IMPEACHMENT DI NEGARA DENGAN SISTEM PRESIDENSIAL: STUDI PERBANDINGAN MEKANISME IMPEACHMENT DI INDONESIA DAN KOREA SELATAN." Mimbar Hukum - Fakultas Hukum Universitas Gadjah Mada 31, no. 2 (2019): 237. http://dx.doi.org/10.22146/jmh.39068.

Full text

Abstract:

In the development of the government sistem, there are semi-presidential systems which are different from presidential and parliamentary systems. The difference is in the case of the presence of the President and Prime Minister as a parliamentary sistem but the mechanism for dismissing the President resembles the impeachment in the presidential systems. This research was conducted to see how the impeachment mechanism compares in countries with presidential sistems, especially Indonesia and in countries with a semi-presidential sistem, namely South Korea. The author finds that there are differe

APA, Harvard, Vancouver, ISO, and other styles

3

Tsypin, M. M. "Classical mechanics of one-dimensional nonlinear systems." Uspekhi Fizicheskih Nauk 159, no. 10 (1989): 395. http://dx.doi.org/10.3367/ufnr.0159.198910k.0395.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Pradipta, Mahadika Bayu, and Tutus Praningki. "Sistem Pendukung Keputusan Menentukan Mekanik Terbaik Menggunakan Metode Simple Additive Weighting." CAHAYAtech 7, no. 2 (2019): 135. http://dx.doi.org/10.47047/ct.v7i2.100.

Full text

Abstract:

Ahass Aries Sentosa Motor Kediri is one of the leading motorcycle dealers and workshops in Kediri. One of the key factors in getting a well-known predicate from consumers is the mechanical quality factor, especially in motorcycle service in the workshop Ahass Aries Sentosa Motor Kediri. The use of a decision support system is very helpful in determining the best mechanics, and is accompanied by the method of Simple Additive Weighting (SAW), this method can complete the research by looking for weight values for each attribute, then ranking process that will determine the optimal alternative, na

APA, Harvard, Vancouver, ISO, and other styles

5

Irawanti, Setiasih, Aneka Prawesti Suka, Indartik Indartik, Fitri Nurfatriani, and Nunung Parlinah. "PENGEMBANGAN SISTEM PENDANAAN REDD+ BERDASARKAN PEMBELAJARAN DARI MEKANISME PEMBAYARAN JASA LINGKUNGAN." Jurnal Penelitian Sosial dan Ekonomi Kehutanan 11, no. 4 (2014): 295–307. http://dx.doi.org/10.20886/jpsek.2014.11.4.295-307.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Sánchez-Muñoz, L., O. Rover, J. Sanz, and J. García-Guinea. "Mecanismos de construcción-destrucción de patrones macroestructurales en microclimas como sistemas complejos." Boletín de la Sociedad Española de Cerámica y Vidrio 45, no. 5 (2006): 321–29. http://dx.doi.org/10.3989/cyv.2006.v45.i5.272.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Sjeničić, Marta, Sandra Perić, and Dragana Marčetić. "The judiciary system and the social care system policy on contractual capacity: Overview of research conducted in the City of Belgrade." Zbornik radova Pravnog fakulteta Nis 59, no. 88 (2020): 135–56. http://dx.doi.org/10.5937/zrpfn0-27813.

Full text

Abstract:

Contractual capacity is the starting point for exercising most human rights. It entails the capacity to sign contracts and enter into the legal transactions, and it is a gateway to exercising a range of labour, voting, family, property, succession (etc.) rights envisaged by the law. The full deprivation of contractual capacity leads to the deprivation of most other capacities. Thus, a person is de iure and de facto excluded from societal life. The mechanism for deprivation of contractual capacity exists in both domestic and foreign jurisprudence, as a way of protecting individual rights. The d

APA, Harvard, Vancouver, ISO, and other styles

8

Aguirre-Téllez, Cristian Andrés, and José Barba-Ortega. "Breve argumentación didáctica de la mecánica cuántica de muchos cuerpos." Respuestas 22, no. 1 (2017): 29. http://dx.doi.org/10.22463/0122820x.817.

Full text

Abstract:

El problema general en mecánica cuántica está basado en la solución de una ecuación en valores propios de un operador dado (en una representación adecuada), generalmente dicho operador es el Hamiltoniano que da cuenta de la interacción energética (salvo que dependa del tiempo) del sistema en cuestión. La solución de la ecuación de Schrödinger permite escribir el comportamiento dinámico del sistema sometido a ciertas restricciones. Sin embargo, la solución analítica de esta ecuación es viable solo en sistemas simples, cuando el sistema se describe desde la interacción de muchas partículas (prob

APA, Harvard, Vancouver, ISO, and other styles

9

Pavelko, Igor, and Vitalijs Pavelko. "DYNAMIC PROPERTIES OF AIRCRAFT COMPONENTS AT REAL CONSTRAINTS." Aviation 12, no. 4 (2008): 113–17. http://dx.doi.org/10.3846/1648-7788.2008.12.113-117.

Full text

Abstract:

The basic purpose of this article is consideration of the problems connected with the application of a method of concentrated weights in the tasks of mechanical system dynamics with non‐classic internal and external constraints. The method of concentrated weights is a convenient method to analyse the dynamic properties of elastic mechanical systems. It has relative simplicity of definition of the parameters of the equivalent discrete system and clearness of computing algorithms and provides comprehensible accuracy of definition of the lowest natural frequencies. A doubtless advantage of the me

APA, Harvard, Vancouver, ISO, and other styles

10

Rianto, Rianto. "SISTEM PAKAR DIAGNOSA PERMASALAHAN PADA PESAWAT CESSNA GRAND CARAVAN 208B MENGGUNAKAN METODE BACKWARD CHAINING." Angkasa: Jurnal Ilmiah Bidang Teknologi 8, no. 2 (2017): 129. http://dx.doi.org/10.28989/angkasa.v8i2.126.

Full text

Abstract:

Success of an aircraft mechanic is to find a problem and solve it. Analysis of the problems in the Cessna Grand Caravan 208B needed someone expert in the field of aircraft mechanics. In this research expert system is used to provide easily diagnose problems with the Cessna Grand Caravan 208B by adopting the knowledge possessed from a professional mechanic, then take it into the software, that will be called by the expert system. Backward Chaining method used to obtain the results as expected by a professional mechanic. Search tecniques used to supplement the backward chaining method is a Best-

APA, Harvard, Vancouver, ISO, and other styles

11

Comina Bellido, German Yuri. "DESARROLLO DE EXPERIMENTOS VIRTUALES BASADOS EN ADOBE FLASH." Revista Cientifica TECNIA 25, no. 2 (2017): 61. http://dx.doi.org/10.21754/tecnia.v25i2.50.

Full text

Abstract:

El presente trabajo describe el desarrollo de dos experimentos virtuales usando Adobe Flash. El primero consta de un sistema masa-resorte el cual permite a los estudiantes hallar el valor de la gravedad terrestre con la incertidumbre correspondiente. El segundo consta de un sistema compuesto por tres masas y cuatro resortes. Éste experimento permite al alumno visualizar movimientos de sistemas mecánicos complejos, además de darle una visión acerca de la mecánica lagrangeana, así como de los conceptos de valor propio y estado propio de un sistema. Ambos programas son interactivos, permitiendo a

APA, Harvard, Vancouver, ISO, and other styles

12

Pantelić, Dragan, and Rade Vasiljević. "Enhancing the performances of the abrasive circular by designing a pneumatic system for automatic control of workpiece clamping and tool auxiliary motion." Tehnika 76, no. 2 (2021): 178–84. http://dx.doi.org/10.5937/tehnika2102178p.

Full text

Abstract:

The paper presents the reconstruction of the factory clamping mechanism for abrasive circular in order to improve the technical characteristics. Reconstruction was done because of the disadvantages of this mechanism in operation. Instead of the mechanical clamping mechanism on the abrasive circular, the newly designed pneumatic clamping mechanism is integrated. The reconstructed work has significantly improved the operation of the abrasive circular. In the previous paper the first solution for the reconstruction of the abrasive circular clamping mechanism was presented. In this paper, the newl

APA, Harvard, Vancouver, ISO, and other styles

13

Safii, M., and Azlan Zulhamsyah. "Sistem Pendukung Keputusan Pemilihan Mekanik Sepeda Motor Yamaha Alfascorfii Dengan Metode Multi Objective Optimization On The Basis Of Ratio Analysis (MOORA)." J-SAKTI (Jurnal Sains Komputer dan Informatika) 2, no. 2 (2018): 162. http://dx.doi.org/10.30645/j-sakti.v2i2.79.

Full text

Abstract:

Job performance is one of the needs in a company. The demand for these needs aims to foster consumer confidence in the services provided. In service business activities such as the sale and service of professional motorbikes, mechanical work is needed. In determining the best mechanic, there are many criteria that the mechanic must fulfill. These criteria include efforts to overcome problems, years of service, education and discipline. The selection of the best motorcycle mechanics is done to help improve the mechanical workability to be better than before. To assist with the determination or

APA, Harvard, Vancouver, ISO, and other styles

14

Rehman, Shafiqur, Kabiru Aliyu, Luai Alhems, et al. "A comprehensive global review of building integrated photovoltaic systems." FME Transactions 49, no. 2 (2021): 253–68. http://dx.doi.org/10.5937/fme2102253r.

Full text

Abstract:

Saudi Arabia has embarked on diversification of its existing energy portfolio through rene wables, mainly solar photovoltaic and thermal, and wind power. This study presents an overview of how different areas around the world utilized building-integrated solar photovoltaic applications to recommend appropriate and suitable options for implementation in Saudi Arabia and the Middle East region. With this objective, the power utility will have three-fold benefits (i) clean and economic power arability for off-grid remotely located dwellings, (ii) cutting down the emissions of greenhouse gases, an

APA, Harvard, Vancouver, ISO, and other styles

15

Guillén Uyen, Jorge, and Genaro Matute Mejía. "Corruption detection mechanism in government procurement: Witness Price System as public policy." Revista científica Pensamiento y Gestión 36 (January 1, 2014): 134–52. http://dx.doi.org/10.14482/pege.36.5568.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

Santoso, Arif Dwi, Abdil H.S, and Diyono . "KRETERIA DESAIN FOTOBIOREAKTOR SISTEM AIRLIFT REACTOR." Jurnal Teknologi Lingkungan 11, no. 1 (2016): 27. http://dx.doi.org/10.29122/jtl.v11i1.1219.

Full text

Abstract:

Global warming has become an increasingly important issue around the world today due to the rise of anthropogenic greenhouse gases emission, which gives several negative impacts on human life. There are some techniques have been studied and assessed i.e. physical mechanism by injected CO2 to the geological formations, chemical mechanism with artificial tree technology and biological mechanism by increasing the primary production through iron enrichment in high nutrient-low chlorophyll (HNLC) waters as well as mixing of water column below the sea surface. Those technologies, which are well know

APA, Harvard, Vancouver, ISO, and other styles

17

Popova, Kseniya. "Incentives as a Mechanism of a Company Resources Distribution or Why Incentive System in Russian Regions Is Inefficient?" Vestnik Volgogradskogo gosudarstvennogo universiteta. Serija 7. Filosofiya. Sociologiya i socialnye tehnologii, no. 1 (May 2016): 110–14. http://dx.doi.org/10.15688/jvolsu7.2016.1.14.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

Vesović, Mitra, Goran Petrović, and Radoslav Radulović. "Analysis of the motion and stability of the holonomic mechanical system in the arbitrary force field." FME Transactions 49, no. 1 (2021): 195–205. http://dx.doi.org/10.5937/fme2101195v.

Full text

Abstract:

In order to give an insight into the work of the machine before the production and assembly and to obtain good analysis, this paper presents detailed solutions to the specific problem occured in the field of analytical mechanics. In addition to numerical procedures in the paper, a review of the theoretical foundations was made.Various types of analysis are very common in mechanical engineering, due to the possibility of an approximation of complex machines. For the proposed system, Lagrange's equations of the first kind, covariant and contravariant equations, Hamiltons equations and the genera

APA, Harvard, Vancouver, ISO, and other styles

19

Morales Rocha, Víctor, Óscar Ruiz Hernández, and Luis Felipe Fernández Martínez. "Audit Mechanism for Detecting Voting Manipulation in Electronic Voting Systems." PAAKAT: Revista de Tecnología y Sociedad 8, no. 14 (2018): 1–19. http://dx.doi.org/10.32870/pk.a8n14.325.

Full text

APA, Harvard, Vancouver, ISO, and other styles

20

Fursenko, Antanas, and Artūras Kilikevičius. "ANALYSIS OF THE PRECISE RASTER-FORMING SYSTEMS / PRECIZINIŲ RASTRŲ FORMAVIMO SISTEMŲ ANALIZĖ." Mokslas – Lietuvos ateitis 8, no. 6 (2017): 553–57. http://dx.doi.org/10.3846/mla.2016.985.

Full text

Abstract:

The precision raster-forming systems creation and development must be based on research in the specific work environment. In not ideal metrological conditions the precision raster-forming system allows to achieve high accuracy of the calibration, when used dynamic calibration method. The article discusses about mechanical design of precision raster-forming systems. According to the scientists’ works describes the precision systems, which working in the dynamic mode. Atliekant tikslumo tyrimus padaryta didelė pažanga, tačiau precizinės rastrų formavimo sistemos dažnai yra per daug sudėtingos ir

APA, Harvard, Vancouver, ISO, and other styles

21

Irkhami, Nafis. "Aspek Insentif, Mekanisme Pengambilan Keputusan dan Koordinasi (Analisis Komparasi Sistem-Sistem Ekonomi)." Muqtasid: Jurnal Ekonomi dan Perbankan Syariah 6, no. 2 (2015): 65. http://dx.doi.org/10.18326/muqtasid.v6i2.65-87.

Full text

Abstract:

This paper is intended as a general comparative study on the economic system of capitalism, socialism and Islamic economics. The comparative analysis is conducted by reviewing aspects of incentives, decision-making mechanism and coordination. Inter-systemic review in this paper shows that Islamic economic system is determined by the parameters of its own ethical system which shows originality and relativity. Unlike other systems, the ethical impulse that is based on the Islamic worldview is fully integrated with Islamic economic motives. Limited freedom assigned to the behavior of consumption

APA, Harvard, Vancouver, ISO, and other styles

22

Sa'adah, Nabitatus. "Mekanisme Penyelesaian Sengketa Pajak dalam Sistem Peradilan di Indonesia." Administrative Law and Governance Journal 2, no. 1 (2019): 19–33. http://dx.doi.org/10.14710/alj.v2i1.19-33.

Full text

Abstract:

AbstractThis study aims to determine the mechanism of tax dispute resolution in the justice system in Indonesia, specifically knowing the mechanism of tax dispute resolution and the characteristics of tax dispute resolution if juxtaposed with the justice system in Indonesia. The research method used is normative legal research that uses laws and regulations (positive law). The results show that tax disputes in Indonesia, especially disputes over tax assessment letters, can be resolved through dispute resolution efforts in the executive domain, namely objection efforts which are one form of dis

APA, Harvard, Vancouver, ISO, and other styles

23

Valančius, Kęstutis, Sabina Paulauskaitė, and Violeta Motuzienė. "RESEARCH OF APARTMENT BUILDINGS‘VENTILATION SYSTEMS AND ANALYSIS OF SYSTEM RENEWAL OPTIONS / DAUGIABUČIŲ GYVENAMŲJŲ NAMŲ VĖDINIMO TYRIMAI IR SISTEMŲ ATNAUJINIMO GALIMYBIŲ ANALIZĖ." Mokslas – Lietuvos ateitis 7, no. 4 (2015): 484–92. http://dx.doi.org/10.3846/mla.2015.825.

Full text

Abstract:

The paper presents experimental study of apartment buildings' ventilation parameters which was carried out during the heating season. The results show that the existing apartment buildings often don‘t guarantee the hygienic conditions that are directly related to the indoor air ventilation. Also article contains an analysis of possibilities to upgrade the ventilation systems of apartment buildings. Four ventilation systems‘ upgrade options were examined. The economic analysis showed that according to the economic aspect the best solution for mechanical ventilation in the typical apartment hous

APA, Harvard, Vancouver, ISO, and other styles

24

Augustinavičius, Giedrius, and Audrius Čereška. "MODELING OF HIGH PRECISION POSITIONING SYSTEM / DIDELIO TIKSLUMO PADĖTIES NUSTATYMO SISTEMOS MODELIAVIMAS." Mokslas - Lietuvos ateitis 5, no. 6 (2013): 633–37. http://dx.doi.org/10.3846/mla.2013.104.

Full text

Abstract:

This paper presents the modeling of a flexure-based precisionpositioning system for micro-positioning uses. The positioningsystem is featured with monolithic architecture, flexure-basedjoints and ultra fine adjustment screws. Its workspace has beenevaluated via analytical approaches. Reduction mechanism isoptimally designed. The mathematical model of the positioningsystem has been derived, which is verified by resorting to finiteelement analysis (FEA). The established analytical and (FEA)models are helpful for a reliable architecture optimization andperformance improvement of the positioning s

APA, Harvard, Vancouver, ISO, and other styles

25

Augustinavičius, Giedrius, and Audrius Čereška. "MODELING OF HIGH PRECISION POSITIONING SYSTEM / DIDELIO TIKSLUMO PADĖTIES NUSTATYMO SISTEMOS MODELIAVIMAS." Mokslas - Lietuvos ateitis 5, no. 6 (2013): 638–41. http://dx.doi.org/10.3846/mla.2013.105.

Full text

Abstract:

This paper presents the modeling of a flexure-based precisionpositioning system for micro-positioning uses. The positioningsystem is featured with monolithic architecture, flexure-basedjoints and ultra fine adjustment screws. Its workspace has beenevaluated via analytical approaches. Reduction mechanism isoptimally designed. The mathematical model of the positioningsystem has been derived, which is verified by resorting to finiteelement analysis (FEA). The established analytical and (FEA)models are helpful for a reliable architecture optimization andperformance improvement of the positioning s

APA, Harvard, Vancouver, ISO, and other styles

26

Augustinavičius, Giedrius, and Audrius Čereška. "NUMERICAL MODELING OF A PRECISE DUAL AXIS POSITIONING SYSTEM / DVIEJŲ AŠIŲ PRECIZINIO POZICIONAVIMO SISTEMOS SKAITINIS MODELIAVIMAS." Mokslas - Lietuvos ateitis 3, no. 6 (2012): 79–81. http://dx.doi.org/10.3846/mla.2011.117.

Full text

Abstract:

This paper presents a model of a precise dual axis flexure-based positioning system for micro-positioning uses. The positioning system is featured with monolithic architecture, flexure-based joints and ultra fine adjustment screws. Its workspace has been evaluated via analytical approaches. Reduction mechanism is optimally designed. The mathematical model of the positioning system has been derived and verified by resorting to finite element analysis (FEA). The established analytical and (FEA) models are helpful for reliable architecture optimization and performance improvement in the positioni

APA, Harvard, Vancouver, ISO, and other styles

27

Shepelev, V., A. Gritsenko, and G. Salimonenko. "Control of hydrocarbon emissions when changing the technical condition of the exhaust system of modern cars." FME Transactions 49, no. 3 (2021): 749–55. http://dx.doi.org/10.5937/fme2103749s.

Full text

Abstract:

The most applicable ICE monitoring method is selective control followed by individual corrections for the current technical condition. The combination of a gas analyzer installed individually in each collector, a motor tester, and a loader which provides test modes makes it possible to recognize failures of exhaust and other systems with high accuracy and to assign an individual corrective action to ensure specified environmental and economic parameters. We developed a generalized mathematical model of changes in the composition of exhaust gases depending on changes in the resistance of the ca

APA, Harvard, Vancouver, ISO, and other styles

28

Mohammad Munib Rosadi, Retno Eka Pramitasari, and Ali Hasbi Ramadani. "PERANCANGAN SISTEM PENGGERAK TRAINER TRANSMISI MANUAL 5 PERCEPATAN TOYOTA KIJANG." Reaktom : Rekayasa Keteknikan dan Optimasi 4, no. 2 (2019): 81–84. http://dx.doi.org/10.33752/reaktom.v4i2.1252.

Full text

Abstract:

The need for learning media in the Machine Element II course makes the transmission trainer to be immediately presented in order to become a means of supporting student learning. In a transmission trainer system a driving mechanism is needed so that the transmission can rotate. The drive mechanism must be reliable to ensure the transmission can rotate without constraints. Therefore, it is necessary to design and calculate in designing the transmission driving mechanism. The purpose of this study was to determine the design and calculation of the transmission trainer drive system. The design re

APA, Harvard, Vancouver, ISO, and other styles

29

Triyono, Mochamad Bruri. "PENGEMBANGAN ISI KURIKULUM PENDIDIKAN TEKNIK ALAT BERAT BERBASIS KEBUTUHAN INDUSTRI." Jurnal Pendidikan Vokasi 6, no. 3 (2016): 355. http://dx.doi.org/10.21831/jpv.v6i3.12159.

Full text

Abstract:

Penelitian ini bertujuan untuk: (1) mengetahui rumusan kompetensi tenaga mekanik alat berat sesuai standar industri; (2) mengetahui kualifikasi tenaga instruktur alat berat yang dibutuhkan industri sesuai standar industri; (3) merumuskan isi kurikulum untuk materi ajar produktif untuk menciptakan tenaga kerja di bidang alat berat. Penelitian ini merupakan penelitian survei dengan model pilihan pengembangan kurikulum Task Analysis. Penelitian dilaksanakan di industri yang bergerak di bidang alat berat dan institusi pendidikan perguruan tinggi dan SMK yang bekerja sama dengan industri alat berat

APA, Harvard, Vancouver, ISO, and other styles

30

Budayasa, I. Putu Gede. "IMPLEMENTASI SISTEM INFORMASI PENDAFTARAN YUDISIUM PADA STMIK STIKOM INDONESIA." Joutica 4, no. 1 (2019): 179. http://dx.doi.org/10.30736/jti.v4i1.271.

Full text

Abstract:

STMIK STIKOM Indonesia is an educational institution that routinely organizes judiciaries. In the process, the judiciary is held every 3 (three) months, STMIK STIKOM Indonesia has and runs a mechanism that involves a computer-based information system. This system is used as a media for registration for students who will join the Judiciary. The mechanism that starts from the registration process through the information system is then followed by verification and validation by several structural officials as stakeholders. For 15 (fifteen) times of implementation until March 2018, the judiciary m

APA, Harvard, Vancouver, ISO, and other styles

31

Rusydiana, Aam Slamet. "MEKANISME TRANSMISI SYARIAH PADA SISTEM MONETER GANDA DI INDONESIA." Buletin Ekonomi Moneter dan Perbankan 11, no. 4 (2009): 345–67. http://dx.doi.org/10.21098/bemp.v11i4.345.

Full text

Abstract:

The transmission mechanism of monetary policy has been an area of abundant economic researchin many countries. The financial system links monetary policy and the real economy. Thus, events ortrends that affect the financial system can also change the monetary transmission mechanism. This studytries to analyze shariah transmission mechanism in Indonesian dual monetary system, using Vector AutoRegression (VAR) and Vector Error Correction Model (VECM) methods.Results show that the relationship between SWBI (SBI Shariah) and shariah financing (LNFINCG) isnegative. It means, when SWBI be higher, th

APA, Harvard, Vancouver, ISO, and other styles

32

Radojević, Zagorka, and Aleksandra Mitrović. "Study of montmorillonite and cationic activators sistem rheological characteristic change mechanism." Journal of the European Ceramic Society 27, no. 2-3 (2007): 1691–95. http://dx.doi.org/10.1016/j.jeurceramsoc.2006.04.152.

Full text

APA, Harvard, Vancouver, ISO, and other styles

33

Wella, Wella, and Fachrin Hafizh Fauzan. "Rancang Bangun Aplikasi Mobile Sistem Pelaporan Keberangkatan Pesawat." Jurnal ULTIMA InfoSys 7, no. 2 (2016): 81–85. http://dx.doi.org/10.31937/si.v7i2.544.

Full text

Abstract:

This research aims to design an application to support mechanical performance at PT Sriwijaya Air in creating a report called Line Maintenance Crew Report (LMCR), applications created aims to mechanics no longer need to walk into the office to make a report LMCR. How that is done in this study is collecting data associated with preparing reports LMCR, create a modeling system by describing it using Data Flow Diagrams (DFD), create relationships between data with the Entity Relationship Diagram (ERD), to design an application using the IDE eclipse and its database using MySQL. Results of resear

APA, Harvard, Vancouver, ISO, and other styles

34

Jarir, Syaikhuna Ibnu, Dwi Kartika Wulandari, Desma Ulfitriani, Hendra Gunawan, and Jeni Rolika. "Analisis Sistem Rantai Pasok Baja." Jurnal Optimasi Sistem Industri 11, no. 1 (2016): 214. http://dx.doi.org/10.25077/josi.v11.n1.p214-220.2012.

Full text

Abstract:

PT Karakatau Steel is the which manufacture iron steel factory in Cilegon, Banten, Indonesia. That said Pujawan supply chain is the network of the which companies are working to create and deliver togerther the product into end customer. Production activity in PT Krakatau Steel include raw steel, producing and selling work-in-process steel, finished steel products and steel billet Including, HRC and CRC, steel wire bar, and also steel-concrete, profile steel, and steel pipe.In finished steel products, steel production company Could match with specification and customer needs. PT Karaktau steel

APA, Harvard, Vancouver, ISO, and other styles

35

Kartika, Yossy. "Sistem Rantai Pasok Industri Minuman Softdrink." Jurnal Optimasi Sistem Industri 10, no. 1 (2011): 121. http://dx.doi.org/10.25077/josi.v10.n1.p121-126.2011.

Full text

Abstract:

This paper discussed the supply chain management solutions at PT Coca Cola Bottling Indonesia withan evaluation of supply chain management of Coca Cola, where supply chain management is aconcept or mechanism to increase the total productivity of companies in the supply chain throughoptimization of the time, location and quantity of flow materials from raw materials into semi-finishedproducts and finished products. Supply Chain Management is not only about the relationship with thesupplier but also the link between the company and consumers. By knowing the value of theperformance of supply chai

APA, Harvard, Vancouver, ISO, and other styles

36

Afriana, Anita. "DASAR FILOSOFIS DAN INKLUSIVITAS GUGATAN SEDERHANA DALAM SISTEM PERADILAN PERDATA." University Of Bengkulu Law Journal 3, no. 1 (2018): 1–14. http://dx.doi.org/10.33369/ubelaj.3.1.1-14.

Full text

Abstract:

The fast litigation procedure stipulates under the Supreme Court Regulation No. 2 year of 2015. That mechanism only requires small amount of permitted claim, it is 200 million Rupiah in maximum, it also settles claims in a very fast manner, 25 days in maximum. This fast procedural mechanism allocated to settle private dispute is called as “the small claims court”, in which, it is already implemented either in states with the civil law system or the common law system. The research methodology used in this article is juridical-normative and juridical kualitative analyze, to aim the SCC phisophy

APA, Harvard, Vancouver, ISO, and other styles

37

Afriana, Anita. "DASAR FILOSOFIS DAN INKLUSIVITAS GUGATAN SEDERHANA DALAM SISTEM PERADILAN PERDATA." University Of Bengkulu Law Journal 3, no. 1 (2019): 1–14. http://dx.doi.org/10.33369/ubelaj.v3i1.4794.

Full text

Abstract:

The fast litigation procedure stipulates under the Supreme Court Regulation No. 2 year of 2015. That mechanism only requires small amount of permitted claim, it is 200 million Rupiah in maximum, it also settles claims in a very fast manner, 25 days in maximum. This fast procedural mechanism allocated to settle private dispute is called as “the small claims court”, in which, it is already implemented either in states with the civil law system or the common law system. The research methodology used in this article is juridical-normative and juridical kualitative analyze, to aim the SCC phisophy

APA, Harvard, Vancouver, ISO, and other styles

38

Rianda, Aditya, Sri Eka Oktafani, Ikhsan Akmal, Zulfa Khairani, and M. Gilang. "Sistem Rantai Pasok Produk Obat-Obatan." Jurnal Optimasi Sistem Industri 10, no. 2 (2011): 160. http://dx.doi.org/10.25077/josi.v10.n2.p160-165.2011.

Full text

Abstract:

PT. Bayer Indonesia is a global enterprise with core competencies in health, nutrition and high-tech materials. As the core company operations, PT. Bayer Indonesia produces and markets various drugs and over-the-counter, as well as products for the agricultural industry. One of the products produced by this company are Aspirin and Calcium D Redoxon (CDR) Fortos. Material and information flows along the value-added chain becomes more dynamic. Supply Chain Management (SCM) is a method, tool, or approach to management. Demand management of PT. Bayer Indonesia is to capture information related to

APA, Harvard, Vancouver, ISO, and other styles

39

Martín, Alejandro, Joaquín Luque, Óscar Pla, and Sylvia Selvi. "KROME Ceramics Sistema de gestión del color para la industria cerámica." Boletín de la Sociedad Española de Cerámica y Vidrio 52, no. 2 (2013): X—XII. http://dx.doi.org/10.3989/cyv.2013.v52.i2.1193.

Full text

APA, Harvard, Vancouver, ISO, and other styles

40

Angeleska, Elena, and Sofija Sidorenko. "Bio-inspired back support system for backpacks." FME Transactions 49, no. 2 (2021): 327–34. http://dx.doi.org/10.5937/fme2102327a.

Full text

Abstract:

In this paper a solution-driven bionic approach applied in a process of product redesign with intention to improve its ergonomic properties is presented. The main goal was to reformulate and use the properties of a unique natural phenomenon in a specific design field. The skeletal structure of the seahorse, its load-bearing capacity with retained flexibility, was an inspiration to explore products where these properties could be applied for improving the functionality. The research process resulted with detecting a problem caused by poor product design - spine deformities of students caused by

APA, Harvard, Vancouver, ISO, and other styles

41

Zaquinaula, Manuel Antonio Abarca. "Propuesta De Un Modelo Alternativo De Funcionamiento Del Sistema Turístico." European Scientific Journal, ESJ 13, no. 17 (2017): 340. http://dx.doi.org/10.19044/esj.2017.v13n17p340.

Full text

Abstract:

The present study shows an alternative proposal of operation of the tourist system from the perspective of mechanics and their coordinated, harmonious, and routine interrelation between its parts. This study was carried out based on the tourism systems proposed by Roberto Boullón, Neil Leiper, and the World Tourism Organization. The problems that affected the development of tourism in a society was analyzed. It established a systemicmechanical model of four parts rector of the tourist system, real and potential demand, geographical space, and offers tourist system which are interrelated to eac

APA, Harvard, Vancouver, ISO, and other styles

42

Sir Anderson. "Pembuatan Sistem Kontrol Sliding Door untuk Rumah Tinggal." Jurnal Ilmiah Poli Rekayasa 10, no. 1 (2014): 73. http://dx.doi.org/10.30630/jipr.10.1.59.

Full text

Abstract:

The sliding door is a type of door that works by sliding the door to the right or to the left. The sliding door is a type of door that is suitable for use in a room with small volume, because the sliding door does not require a large space. lack the sliding door when the door has been closed, lack the sliding door when the door has been closed, there still exists a gap between the open doors and walls so that air can be in and out freely. with the construction of the door using the hinge mechanism, can minimize these conditions. To make the sliding door works automatically, the authors make a

APA, Harvard, Vancouver, ISO, and other styles

43

Vaidogas, Egidijus Rytas. "MODELLING UNCERTAINTIES IN ASSESSING RISKS TO STRUCTURES CAUSED BY ACCIDENTAL EXPLOSIONS/NEAPIBRĖŽTUMŲ MODELIAVIMAS VERTINANT AVARINIŲ SPROGIMŲ RIZIKĄ PASTATAMS." JOURNAL OF CIVIL ENGINEERING AND MANAGEMENT 7, no. 2 (2001): 89–98. http://dx.doi.org/10.3846/13921525.2001.10531709.

Full text

Abstract:

Siūloma procedūra avarinių sprogimų mechaninių poveikių neapibrėžtumams kiekybiškai įvertinti. Nagrinėjamas pavojingasis reiškinys yra dėl avarinių dujų nuotėkių susidarančių degių ir sprogių debesų detonacija ir jos sukeliama sprogimo banga. Sprogimų poveikių intensyvumai yra apibūdinami tikimybinei rizikos analizei įprastomis pavojaus funkcijomis (angl. hazard functions). Galutinis siūlomosios procedūros taikymo rezultatas yra pavojaus funkcijų parinkimas statistinių imčių, sukurtų stochastinio modeliavimo būdu, pagrindu. Taikomas Monte Karlo metodas, o modeliuojami nepalankieji reiškiniai,

APA, Harvard, Vancouver, ISO, and other styles

44

Julasmasari, Fitri. "Analisis Sistem Rantai Pasok PT. Semen Padang." Jurnal Optimasi Sistem Industri 10, no. 1 (2011): 113. http://dx.doi.org/10.25077/josi.v10.n1.p113-120.2011.

Full text

Abstract:

Supply Chain Management is a concept or mechanism to increase the total productivity of companiesin the supply chain through optimization of the time, location and quantity of material flow from rawmaterials into semi-finished products and finished products. Supply Chain Management is not onlyabout the relationship with the supplier but also the link between the company and consumers. Tofind out the value of the company supply chain performance within a certain time, we need a draftmodel of supply chain performance measurement in which the design will be implemented at thecompany. By knowing t

APA, Harvard, Vancouver, ISO, and other styles

45

Christy, Tika, and Ilwan Syafrinal. "SISTEM PAKAR DIAGNOSA KERUSAKAN PADA ALAT BERAT MENGGUNAKAN METODE FORWARD CHAINING." JURTEKSI (Jurnal Teknologi dan Sistem Informasi) 6, no. 1 (2019): 93–100. http://dx.doi.org/10.33330/jurteksi.v6i1.449.

Full text

Abstract:

Abstrack: The ability of computers to remember and store information properly can be utilized without having to depend on deficiencies that humans have, such as hunger, thirst and emotions that can be felt at any time as humans. Except for electrical energy, all human weaknesses in remembering something can be done by a computer without obstacles. This forward tracking is a data-driven approach. In this approach tracking starts with input information, and then tries to draw conclusions. The basic concept of an expert system where the user submits information or facts to the expert system then

APA, Harvard, Vancouver, ISO, and other styles

46

VERONESE, Osmar, and Matheus Weiss PEREIRA. "A (IN)APLICABILIDADE DA TEORIA DA OBJETIVAÇÃO OU ABSTRATIVIZAÇÃO DO CONTROLE DE CONSTITUCIONALIDADE DIFUSO NO BRASIL." Revista Juridica 2, no. 55 (2019): 565. http://dx.doi.org/10.21902/revistajur.2316-753x.v2i55.3789.

Full text

Abstract:

RESUMOO constituinte originário brasileiro optou pelo modelo de Constituição rígida, no qual o sistema de controle de constitucionalidade das leis objetiva averiguar se a norma infraconstitucional está em consonância com as diretrizes previstas no texto constitucional. O presente artigo versa sobre o controle repressivo de constitucionalidade incidental, com ênfase no mecanismo constitucional que permite ao Senado Federal suspender a execução de lei declarada inconstitucional pelo Supremo Tribunal Federal e na verificação de aplicabilidade da teoria da objetivação do controle difuso no Direito

APA, Harvard, Vancouver, ISO, and other styles

47

Augustinavičius, Giedrius, and Audrius Čereška. "MODELLING A COMPLIANT-BASED PRECISE POSITIONING STAGE / AUKŠTO TIKSLUMO POZICIONAVIMO SISTEMOS MODELIAVIMAS TAIKANT BESIDEFORMUOJANČIUS MECHANIZMUS." Mokslas - Lietuvos ateitis 6, no. 4 (2013): 523–27. http://dx.doi.org/10.3846/mla.2012.84.

Full text

Abstract:

The paper presents modelling precise dual axis flexure-based precision positioning systems for micro-positioning applications. The positioning system is featured with monolithic architecture, flexure-based joints and piezo stacks. Its workspace has been evaluated via analytical approaches. Amplification mechanism is optimally designed. The mathematical model of the positioning system has been derived and verified by resorting to finite element analysis (FEA). The established analytical and (FEA) models are helpful for optimizing reliable architecture and improving the performance of the positi

APA, Harvard, Vancouver, ISO, and other styles

48

Araúzo, José Alberto, Ricardo Del Olmo, and Juan José Laviós. "Subasta combinatoria para la programación dinámica en sistemas de fabricación distribuidos." Dirección y Organización, no. 51 (December 1, 2013): 55–64. http://dx.doi.org/10.37610/dyo.v0i51.438.

Full text

Abstract:

Los métodos de programación de operaciones tradicionales, estáticos y basados en arquitecturas centralizadas o jerárquicas, no son suficientemente flexibles para adaptarse al dinamismo y complejidad de los sistemas de fabricación actuales. Por ello, la investigación en técnicas dinámicas de programación y control on-line está creciendo rápidamente. En este ar tículo se presenta una técnica de programación dinámica on-line basada en modelos de mercado e implementada sobre un sistema multiagente. Esta propuesta, además de dinámica, es distribuida no jerárquica, lo que aporta al sistema las carac

APA, Harvard, Vancouver, ISO, and other styles

49

Al-Shammari, Sarah, Abdulhassan Karamallah, and Sattar Aljabair. "Optimization of tilt angle and experimental study of standalone PV system for clean energy home supply in Baghdad." FME Transactions 49, no. 3 (2021): 664–72. http://dx.doi.org/10.5937/fme2103664a.

Full text

Abstract:

The performance of the system of the solar radiation conversion is influenced via the angle of tilt with a horizontal plane; therefore, the photovoltaic array requires to be tilted at the right angle for maximizing the system conversion efficiency. The present paper has been carried out monthly at the optimum tilt angle numerically with an experimental system set up for home supply in Baghdad city (latitude 33°20'). Mathematical models were programmed by MATLAB to predict the solar energy incident on the surface all day of the year at angles from (0-90°). Experimental results manifested the pe

APA, Harvard, Vancouver, ISO, and other styles

50

Febijanto, Irhan. "PERHITUNGAN FAKTOR EMISI DI SISTEM JARINGAN KETENAGALISTRIKAN JAWA-MADURA-BALI." Jurnal Teknologi Lingkungan 11, no. 2 (2016): 227. http://dx.doi.org/10.29122/jtl.v11i2.1207.

Full text

Abstract:

The methodology of calculation for emission factor for grid connection is determined by IPCCC Intergovernmental Panel Climate Change). The methodology is revised periodically,and become comprehensive calculation. Mainly in developed countries, the emission factor is provided by government related institution yearly. Therefore the developers who need that value can get easily, and they can save a time and money in the developing Clean Development Mechanism Project. In Indonesia, until now there is no government institution or other related institutions that have an obligation to provide and cal

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!