Log in

Relevant bibliographies by topics / Melt spinning

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Melt spinning'

Author: Grafiati

Published: 4 June 2021

Last updated: 8 June 2024

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Melt spinning.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Melt spinning"

1

YAMADA, HIRONORI. "Melt Spinning Technology." Sen'i Gakkaishi 45, no. 12 (1989): P529—P534. http://dx.doi.org/10.2115/fiber.45.12_p529.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Rosen, G., J. Avissar, Y. Gefen, and J. Baram. "Centrifuge melt spinning." Journal of Physics E: Scientific Instruments 20, no. 5 (May 1987): 571–74. http://dx.doi.org/10.1088/0022-3735/20/5/024.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Zhou, Zhi Ming, Wei Jiu Huang, M. Deng, Min Min Cao, Li Wen Tang, Jing Luo, Xiao Ping Li, and Hua Xia. "Numerical Simulation on Rapidly Solidified Melt Spinning CuFe10 Alloys." Advanced Materials Research 228-229 (April 2011): 416–21. http://dx.doi.org/10.4028/www.scientific.net/amr.228-229.416.

Full text

Abstract:

The numerical simulation model of single roller rapid solidification melt-spinning CuFe10 alloys was built in this paper. The vacuum chamber, cooling roller and sample were taken into account as a holistic heat system. Based on the heat transfer theory and liquid solidification theory, the heat transfer during the rapids solidification process of CuFe10 ribbons prepared by melt spinning can be approximately modeled by one-dimensional heat conduction equation, so that the temperature distribution and the cooling rate of the ribbon can be determined by the integration of this equation. The simulative results are coincident very well with the microstructure of rapid solidification melt spinnng CuFe10 alloys at three different wheel speeds 4, 12 and 36 m/s.

APA, Harvard, Vancouver, ISO, and other styles

4

Slattery, John C., and Sangheon Lee. "Analysis of melt spinning." Journal of Non-Newtonian Fluid Mechanics 89, no. 3 (March 2000): 273–86. http://dx.doi.org/10.1016/s0377-0257(99)00048-8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Maeda, Naoyuki, Akira Nii, Shunichi Yamamoto, and Seiichi Uemura. "4850836 Melt spinning apparatus." Carbon 28, no. 1 (1990): I. http://dx.doi.org/10.1016/0008-6223(90)90135-l.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Li, Ye-Ming, Xiao-Xiong Wang, Shu-Xin Yu, Ying-Tao Zhao, Xu Yan, Jie Zheng, Miao Yu, Shi-Ying Yan, and Yun-Ze Long. "Bubble Melt Electrospinning for Production of Polymer Microfibers." Polymers 10, no. 11 (November 10, 2018): 1246. http://dx.doi.org/10.3390/polym10111246.

Full text

Abstract:

In this paper, we report an interesting bubble melt electrospinning (e-spinning) to produce polymer microfibers. Usually, melt e-spinning for fabricating ultrafine fibers needs “Taylor cone”, which is formed on the tip of the spinneret. The spinneret is also the bottleneck for mass production in melt e-spinning. In this work, a metal needle-free method was tried in the melt e-spinning process. The “Taylor cone” was formed on the surface of the broken polymer melt bubble, which was produced by an airflow. With the applied voltage ranging from 18 to 25 kV, the heating temperature was about 210–250 °C, and polyurethane (TPU) and polylactic acid (PLA) microfibers were successfully fabricated by this new melt e-spinning technique. During the melt e-spinning process, polymer melt jets ejected from the burst bubbles could be observed with a high-speed camera. Then, polymer microfibers could be obtained on the grounded collector. The fiber diameter ranged from 45 down to 5 μm. The results indicate that bubble melt e-spinning may be a promising method for needleless production in melt e-spinning.

APA, Harvard, Vancouver, ISO, and other styles

7

Gan, Xue Hui, Qiang Liu, Xiao Jian Ma, Chun Hong Jia, and Chong Chang Yang. "The Characteristics of Melt Flow in Composite Spinning Micropore." Advanced Materials Research 383-390 (November 2011): 2968–73. http://dx.doi.org/10.4028/www.scientific.net/amr.383-390.2968.

Full text

Abstract:

From the rheological theory, the combination of the rheological characteristic of melt spinning and principle of spinning, the paper researches the mathematical model of the velocity distribution and shear rate distribution when the melt flow in composite spinning sheath-core orifices. According to the mathematical model, the melt flow velocity and pressure characteristic of the composite spinning micropore are researched with the software of CFD-Fluent. The results for the design of composite spinning technology and components provide a good theoretical basis.

APA, Harvard, Vancouver, ISO, and other styles

8

Uno, Taiko, Shigemitsu Murase, and Seizo Miyata. "Melt Spinning of Tetrafluoroethylene Copolymer." FIBER 58, no. 4 (2002): 143–48. http://dx.doi.org/10.2115/fiber.58.143.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Ziabicki, Andrzej, Leszek Jarecki, and Andrzej Wasiak. "Dynamic modelling of melt spinning." Computational and Theoretical Polymer Science 8, no. 1-2 (January 1998): 143–57. http://dx.doi.org/10.1016/s1089-3156(98)00028-2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Gupta, Rakesh K., and Kim F. Auyeung. "Crystallization in polymer melt spinning." Journal of Applied Polymer Science 34, no. 7 (November 20, 1987): 2469–84. http://dx.doi.org/10.1002/app.1987.070340711.

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Melt spinning"

1

Cicek, H. "Computer simulation of melt spinning." Thesis, University of Leeds, 1986. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.235356.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Golzar, Mohammad. "Melt Spinning of the Fine PEEK Filaments." Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2004. http://nbn-resolving.de/urn:nbn:de:swb:14-1101380771578-37580.

Full text

Abstract:

The production of fine filaments using the melt spinning process needs considerable effort. A thermoplastic melt is stretched from the spinneret under a constant take-up speed. The high performance thermoplastic PEEK is solidified in the melt spinning process in a small distance and short time. Therefore, the fine PEEK filaments in the fibre formation zone underwent a high deformation and cooling rate. To make the melt spinning process stable and to produce the fine PEEK filaments, material properties and material behaviour are examined using on-line and off-line measurements. The fibre speed measured using Laser Doppler Anemometry and simultaneous temperature measured using infrared thermography enable both the strain rate and consequently the apparent extensional viscosity to be estimated. This provides the apparent extensional viscosity over the spinning line, which can itself show the structural development of PEEK fibres in the fibre formation zone, i.e. necking and solidification phenomena. The one-dimensional fibre formation model must include both procedural and material parameters. The heat transfer coefficient was estimated using the filament temperature measurement and showed a relatively high contribution of radiation and free convection in comparison to forced convection near the spinneret. The improved model of PEEK fibre formation gave a good agreement to both temperature and speed measurements, and also confirmed the high deformation rate effect on the extensional viscosity, which could be simulated with a properly generalised Newtonian constitutive equation. The end properties of the fibres, such as as-spun filament fineness, orientation (expressed using total birefringence) and total crystallisation (examined using DSC) are investigated in relation to different spinning conditions, i.e. take-up speed, throughput and the draw down ratio. The tensile test diagram results, measuring phenomena such as the elongation at break, tenacity, and the Young modulus of elasticity are also analysed in order to complete the correlation of the above-mentioned spinning conditions to the structural properties of as-spun fine PEEK filaments. The melt spinning of fine PEEK fibres under different spinning conditions is examined with the purpose of finding the optimum take-up speed and throughputs. Other spinning conditions, such as the temperature of melt processing, and the arrangement and diameter of the spinneret holes, are changed in order to make the process more stable. The recommendations for further study can be used to further examine some aspects of this work; however, this work presents a new concept for fine PEEK melt spinning supported by spinnability examinations under different spinning conditions and the improved model of fibre formation, which is also relevant for typical industrial processing applications.

APA, Harvard, Vancouver, ISO, and other styles

3

Su, Yang. "Theoretical studies of hollow fiber spinning /." Connect to Online Resource-OhioLINK, 2007. http://rave.ohiolink.edu/etdc/view?acc_num=toledo1180971638.

Full text

Abstract:

Dissertation (Ph.D.)--University of Toledo, 2007.
Typescript. "Submitted as partial fulfillment of the requirements for the Doctor of Philosophy Degree in Engineering." Bibliography: leaves 200-218.

APA, Harvard, Vancouver, ISO, and other styles

4

Jia, Jun. "Melt spinning of continuous filaments by cold air attenuation." Diss., Georgia Institute of Technology, 2010. http://hdl.handle.net/1853/37276.

Full text

Abstract:

Traditionally ultrafine fibers below 1 dpf are produced by extrusion followed by mechanical drawing. A modified melt spinning apparatus with high-speed air nozzle was designed and fabricated to produce continuous polypropylene filaments by cold air drawing only. With this setup, the fiber is quenched and simultaneously attenuated by a symmetric cold air jet. Since the formation of fiber structure is highly dependent on the processing conditions, the new process will provide a unique operation window to study fiber attenuation and structural formation under high-speed cold air drawing. Based on computational fluid dynamics simulation results, a parametric study was carried out under different process conditions which include processing temperature, air velocity and polymer volume flow rate. Effects of changes in processing variables on the fiber diameter, molecular orientation, crystallinity, tensile strength and other properties were studied. Furthermore, a theoretical model was developed to analyze the non-isothermal fiber attenuation mechanisms. The new knowledge obtained in this study would likely yield a new process for producing innovative fiber products.

APA, Harvard, Vancouver, ISO, and other styles

5

Grove, Dale A. III. "Rheology and evolution of order in melt spinning." Diss., Georgia Institute of Technology, 1992. http://hdl.handle.net/1853/11112.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Agarwal, Uday S. "Orientation and crystallization in melt-spinning of poly(ethylene terephthalate) based compositions." Thesis, Georgia Institute of Technology, 1987. http://hdl.handle.net/1853/9975.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Desai, Dipen. "Solid-state plasticizers for melt extrusion /." View online ; access limited to URI, 2007. http://0-digitalcommons.uri.edu.helin.uri.edu/dissertations/AAI3276980.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Lyons, Jason Michael Ko Frank K. "Melt-electrospinning of thermoplastic polymers : an experimental and theoretical analysis /." Philadelphia, Pa. : Drexel University, 2004. http://dspace.library.drexel.edu/handle/1860/367.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Feitosa, Francisco Riccelly P. "Obtenção e evolução da fase icosaedral quasicristalina em ligas Al-Cu-Fe e Al-Cu-Fe-B por Melt-Spinnin." Universidade Federal da Paraíba, 2009. http://tede.biblioteca.ufpb.br:8080/handle/tede/5349.

Full text

Abstract:

Made available in DSpace on 2015-05-08T14:59:46Z (GMT). No. of bitstreams: 1 parte1.pdf: 1839351 bytes, checksum: 34e86046fc8cf8f52125675d2e7267f6 (MD5) Previous issue date: 2009-03-03
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior
Melt spinnng processing is one of the most common processes to obtaining quasicrystaline structures. This is because of the fast cooling rate it imposes on the system, favoring such type of structure. This work deals with the production of quasycristaline phases (Al60Cu27,5Fe12,5 e Al57Cu27,5Fe12,5B3) via melt-spinning. The alloys were initially cast via induction melting under atmospheric air, with the designed chemical composition of the quasicrystals. Hence, the ribbons were produce by melt-spinning were characterized by means of x-ray diffraction and scanning electron microscopy. The results indicate that the icosahedral ψ - Al65Cu20Fe15 phase formed in both types of starting compositions. It seams that the boron contributes to stabilize the icosahedral phase.
O processo melt-spinning por imprimir altas taxas de resfriamento, é um dos principais meios para a obtenção de ligas com estrutura quasicristalinas, sendo o primeiro método utilizado para produzir materiais quasicristalinos. Neste trabalho utilizou-se este processo para a elaboração das ligas quasicristalinas Al(60-x)Cu25Fe15Bx, Al(60-x)Cu27,5Fe12,5Bx e Al(65-x)Cu20Fe15Bx (x=0 e x=3%at de boro). As ligas foram previamente fabricadas, por fusão, em atmosfera de argônio, em forno à indução, para em seguida serem submetidas ao processo melt-spinning , onde se obteve o material na forma de fita. As amostras foram caracterizadas por difração de raios-x e microscopia eletrônica de varredura. Os resultados indicaram a formação da fase icosaedral ψ - Al65Cu20Fe15 nas composições estudadas e uma provável contribuição do boro na produção dessa fase icosaedral

APA, Harvard, Vancouver, ISO, and other styles

10

Dorsey, Kyra. "Deformation and evolution of morphology in meltblown filaments." Diss., Georgia Institute of Technology, 2001. http://hdl.handle.net/1853/11787.

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Melt spinning"

1

F, Matthys Eric, TMS Process Monitoring and Control Committee., TMS Solidification Committee., and Minerals, Metals & Materials Society. Meeting, eds. Melt-spinning and strip casting: Research and implementation : proceedings of the ... symposium sponsored by the TMS Process Monitoring and Control Committee and the TMS Solidification Committee, held at the TMS Annual Meeting in San Diego, March 1-5, 1992. Warrendale, Pa: Minerals, Metals & Materials Society, 1992.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Carpenter, James Kent. Processing of molten metals by planar-flow spin-casting: Modelling and experiments. Ann Arbor, Mich: UMI Dissertation Services, 1990.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

F, Matthys Eric, Truckner William G, TMS Solidification Committee., TMS Synthesis and Analysis in Materials Processing Committee., and Minerals, Metals and Materials Society. Meeting, eds. Melt spinning, strip casting, and slab casting: Proceedings of a symposium sponsored by the Materials Design and Manufacturing Division (MDMD), Solidification Committee and the the [sic] joint Extraction and Processing Division (EPD) and MDMD Synthesis Control & Analysis in Materials Processing (SCAMP) Committee of the Materials, Metals & Materials Society (TMS) held during the TMS Annual Meeting in Anaheim, California, February 4-8, 1996. Warrendale, Pa: The Society, 1996.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

Tewari, S. N. Undercooled and rapidly quenched Ni-Mo alloys. [Cleveland, Ohio: National Aeronautics and Space Administration, Lewis Research Center, 1986.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

Ellis, David L. Precipitation strengthened high strength, high conductivity Cu-Cr-Nb alloys produced by chill block melt spinning. [Washington, D.C.]: National Aeronautics and Space Administration, 1989.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

United States. National Aeronautics and Space Administration, ed. The mathematical modeling of rapid solidification processing. [Washington, D.C.]: National Aeronautics and Space Administration, 1986.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

Center, Lewis Research, ed. The mathematical modeling of rapid solidification processing. [Washington, D.C.]: National Aeronautics and Space Administration, 1986.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

Thomas, Rathz, ed. Final report submitted to National Aeronautics and Space Administration, George C. Marshall Space Flight Center ... for contract NAS8-38609 ... entitled melt spinning study. Huntsville, Ala: Materials Processing Laboratory, Center for Automation & Robotics, University of Alabama in Huntsville, 1993.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

National Aeronautics and Space Administration (NASA) Staff. Melt Spinning Study. Independently Published, 2018.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

Matthys, E. F. Melt-Spinning & Strip Casting: Research and Implementation. Minerals, Metals, & Materials Society, 1992.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Melt spinning"

1

Gooch, Jan W. "Melt Spinning." In Encyclopedic Dictionary of Polymers, 450. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_7300.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Mohamed, Khayet. "Melt Spinning." In Encyclopedia of Membranes, 1–3. Berlin, Heidelberg: Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-40872-4_1176-2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

White, James L., and David D. Choi. "Melt Spinning." In Polyolefins, 145–83. München: Carl Hanser Verlag GmbH & Co. KG, 2004. http://dx.doi.org/10.3139/9783446413030.008.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

White, James L., and David D. Choi. "Melt Spinning." In Polyolefins, 145–83. München, Germany: Carl Hanser Verlag GmbH & Co. KG, 2005. http://dx.doi.org/10.1007/978-3-446-41303-0_8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Mishra, Munmaya, and Biao Duan. "Melt Spinning." In The Essential Handbook of Polymer Terms and Attributes, 103–4. Boca Raton: CRC Press, 2024. http://dx.doi.org/10.1201/9781003161318-102.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Schäfer, K. "Melt spinning: technology." In Polymer Science and Technology Series, 440–45. Dordrecht: Springer Netherlands, 1999. http://dx.doi.org/10.1007/978-94-011-4421-6_61.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Gooch, Jan W. "Melt Spinning Process." In Encyclopedic Dictionary of Polymers, 450. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_7301.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Gupta, V. B. "Melt-spinning processes." In Manufactured Fibre Technology, 67–97. Dordrecht: Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-011-5854-1_4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Spruiell, J. E., and Eric Bond. "Melt spinning of polypropylene." In Polymer Science and Technology Series, 427–39. Dordrecht: Springer Netherlands, 1999. http://dx.doi.org/10.1007/978-94-011-4421-6_60.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Wallenberger, F. T. "Continuous Melt Spinning Processes." In Advanced Inorganic Fibers, 79–112. Boston, MA: Springer US, 2000. http://dx.doi.org/10.1007/978-1-4419-8722-8_4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Melt spinning"

1

Jakubowski, Konrad, Rudolf Hufenus, Jasmin Smajic, and Manfred Heuberger. "Bicomponent melt-spinning of polymer optical fibers." In Bragg Gratings, Photosensitivity and Poling in Glass Waveguides and Materials. Washington, D.C.: OSA, 2018. http://dx.doi.org/10.1364/bgppm.2018.jtu5a.78.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Shiota, I., H. Kohri, M. Kato, and I. J. Ohsugi. "Fine Bi2Te3 wires fabricated by glass sealed melt spinning." In 2006 25th International Conference on Thermoelectrics. IEEE, 2006. http://dx.doi.org/10.1109/ict.2006.331361.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Pi, Fengdong, Mingyuan Du, He Liao, Jinhong Li, and Xuehui Gan. "The Research Status and Analysis of Melt Spinning Pack." In 2nd International Conference on Intelligent Manufacturing and Materials. SCITEPRESS - Science and Technology Publications, 2018. http://dx.doi.org/10.5220/0007528401710175.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Tran, Nguyen Hoai An, Martin Kirsten, and Chokri Cherif. "New fibers from PCM using the conventional melt spinning process." In PROCEEDINGS OF THE EUROPE/AFRICA CONFERENCE DRESDEN 2017 – POLYMER PROCESSING SOCIETY PPS. Author(s), 2019. http://dx.doi.org/10.1063/1.5084834.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Jawad, Sarah M., Ahmed O. AL-Roubaiy, and Saad H. AL-Shafaie. "Preparation of amorphous Ag-Cu alloy by melt spinning technology." In 4TH INTERNATIONAL SCIENTIFIC CONFERENCE OF ENGINEERING SCIENCES AND ADVANCES TECHNOLOGIES. AIP Publishing, 2023. http://dx.doi.org/10.1063/5.0156790.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Erdogan, Umit Halis, and Figen Selli. "Bicomponent spinning of biodegradable polymers: Melt-spun PHBV micro fibers." In PROCEEDINGS OF THE 38TH INTERNATIONAL CONFERENCE OF THE POLYMER PROCESSING SOCIETY (PPS-38). AIP Publishing, 2024. http://dx.doi.org/10.1063/5.0208018.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Bryant, Yvonne G. "Melt Spun Fibers Containing Microencapsulated Phase Change Material." In ASME 1999 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1999. http://dx.doi.org/10.1115/imece1999-0607.

Full text

Abstract:

Abstract MicroPCMs are successfully being incorporated into solution-spun acrylic fibers, significantly increasing their thermal energy storage capability. However, melt-spun fiber production far exceeds that of acrylic fiber. Thus, the commercial potential of melt-spun fibers and resulting fabrics with enhanced thermal energy storage capabilities is enormous for the apparel and industrial insulation markets. However, at melt spinning temperatures, i.e., at temperatures > 200° C, microencapsulated phase change materials (microPCMs) lose their core material, which corrupts the melt spinning process. Before these materials can successfully be incorporated into melt spun fibers, microcapsules < 10 microns in size must be available with a more stable wall structure. This paper will discuss the results of NSF sponsored Phase I and II Small Business Innovation Research (SBIR) grants that investigated PCM microcapsules for high temperature application, and describe their inclusion into melt-spun fibers.

APA, Harvard, Vancouver, ISO, and other styles

8

Chen, J. S. J., and A. A. Tseng. "Modeling and Optimization of Nozzle Design in Planar Flow Melt Spinning." In ASME 1999 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1999. http://dx.doi.org/10.1115/imece1999-0658.

Full text

Abstract:

Abstract Numerical and experimental studies were performed to analyze a planar flow melt spinning process (PFMS) with a focus on the optimal nozzle design. Three-dimensional computational fluid dynamics (CFD) modeling using FIDAP was carried out to analyze the flow distribution in various nozzle shapes including rectangular, trapezoidal, and hemispherical edges. A laser-based Particle Image Velocimetry (PIV) system was developed to measure the velocity field at the nozzle exit. The CFD modeling results were validated by the PIV measurements. It was found that a converging nozzle with diverging edges along with a 30°-injection angle provided the best design. The optimized nozzle was used to produce high quality ribbons as characterized by the surface roughness measurements and micrograph techniques.

APA, Harvard, Vancouver, ISO, and other styles

9

Xie, Ruimin, Yongsheng Ding, Kuangrong Hao, Lei Chen, and Tong Wang. "Using gated recurrence units neural network for prediction of melt spinning properties." In 2017 11th Asian Control Conference (ASCC). IEEE, 2017. http://dx.doi.org/10.1109/ascc.2017.8287531.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Pinkerton, F. E., and D. J. VanWingerden. "Magnetic hardeninf of SmFe/sub 10/V/sub 2/ by melt-spinning." In International Magnetics Conference. IEEE, 1989. http://dx.doi.org/10.1109/intmag.1989.689951.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Melt spinning"

1

Sweetser, Daniel M., and Nicole E. Zander. Parameter Study of Melt Spun Polypropylene Fibers by Centrifugal Spinning. Fort Belvoir, VA: Defense Technical Information Center, July 2014. http://dx.doi.org/10.21236/ada607592.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Buelow, Nicholas Lee. Microstructual investigation of mixed rar earth iron boron processed vis melt-spinning and high-pressure gas-atomization for isotrophic bonded permanent magnets. Office of Scientific and Technical Information (OSTI), January 2005. http://dx.doi.org/10.2172/850076.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!