Relevant bibliographies by topics / Měření v časové oblasti / Dissertations / Theses
To see the other types of publications on this topic, follow the link: Měření v časové oblasti.

Dissertations / Theses on the topic 'Měření v časové oblasti'

Author: Grafiati
Published: 4 June 2021
Last updated: 9 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 30 dissertations / theses for your research on the topic 'Měření v časové oblasti.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Háněl, Petr. "Měření frekvenční stability oscilátorů v časové oblasti." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2014. http://www.nusl.cz/ntk/nusl-220360.

Full text
Abstract:
The thesis focuses on measurements of oscillators’ frequency stability. The theoretical part describes the basic concepts of measurement of frequency, measuring systems and measurement errors. The second part of thesis describes the design of measurement system. The design contains all data for build prototype and software, including all source codes.
APA, Harvard, Vancouver, ISO, and other styles
2

Palai-Dany, Tomáš. "Dielektrická spektroskopie karboxymetylcelulózy v časové oblasti." Doctoral thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-233477.

Full text
Abstract:
The dissertation deals with the time-domain dielectric relaxation spectroscopy of carboxymethylcellulose. The main attention was paid to the experimental part of research, mainly to the design and subsequent development of an experimental setup for the measurement of discharge currents and for their processing and analysis. The subject of the measurement is carboxymethylcellulose (CMC), which is a simple polysaccharide used in wide range of applications, among else also in biomedical engineering. The study of CMC properties has required the development of a new experimental set-up of original design, which includes the equilibration (short-circuiting) of a sample before the measurement, charging and discharging at defined time intervals, switching between these two modes, recording of measurement, adjustments and processing of measured signals up to Fourier transformation into the frequency domain and, finally, calculation of complex permittivity of the sample. The frequency dependence of complex permittivity or its imaginary part, obtained by Fourier transformation of discharge current in time domain, is then referred to as the dielectric spectrum. In view of the fact that current measurements were done at very low levels of measured signal (below 10-12 A) the whole measurement was no easy matter. The framework of the work also necessitated studies and subsequent resolution of problems associated with shielding, grounding, presence of noise and sensitivity to various ambient influences. The research work focused on a reliable and trustworthy measurement of very low discharge currents and, subsequently, mathematical processing of noise present in them, i.e., operations with the original, experimentally established signal in time domain, leading in principle to a digital filtration of measured dielectric data. A further pursued objective is the explanation of dielectric parameters of tested carboxymethylcellulose sample in the widest possible frequency spectrum. The integral part of the research was the selection and application of the method for the transformation of the adjusted signal to the frequency domain. The experimental works, including data processing, were carried out in the Department of Physics, Brno FEEC BUT. Measurements were done with Keithley 617 Electrometer, HP4284A Frequency Analyzer and Janis CCS-400-204 cryogenic system. The results were completed with results obtained at the V Department of Experimental Physics, Centre for Electronic Correlations and Magnetism, University of Augsburg, Germany.
APA, Harvard, Vancouver, ISO, and other styles
3

Káňa, Vojtěch. "Automatizované měření charakteristik dvojbranů v DC, AC a časové oblasti." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2017. http://www.nusl.cz/ntk/nusl-316444.

Full text
Abstract:
This master´s thesis describes about automated measurements of two – ports of frequency, time and DC area. Gradually, there is elaborated several theoretical foundations dealing with this issue. For example, different types of buses, available programs and general theory of two – ports circuits. Also a method for solving and implementing a measuring device for communication between apparatuses and DUT is designed and described. In conclusion, the results and evaluation of measurement are processed.
APA, Harvard, Vancouver, ISO, and other styles
4

Štverka, Dalibor. "Analýza koaxiálních a jednovodičových nehomogenních struktur v časové oblasti." Doctoral thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-233486.

Full text
Abstract:
The work considers pulse wire-guided electromagnetic (EM) waves. The main contribution of the work is the original design of the isolation bushing for maximizing of the received wave (echo) thanks to the results of the numerical simulations, the acquirement of the new acknowledges of the reflections of the guided EM wave from the various boundaries, the construction of PML layers for FDTD simulations in rotational coordinates, the advances made in temporary excitation sources for FDTD and the formulation of the program code for FDTD in rotational coordinates in Matlab environment. The rightness of the numerical simulations was verified in practical experiments. The practical exploitation of the results is supposed in instrumentation and control technology - the level measurement in reservoirs.
APA, Harvard, Vancouver, ISO, and other styles
5

Cigánek, Jan. "Hranové konečné prvky v časové oblasti." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-218744.

Full text
Abstract:
Diplomová práce se zabývá metodou hybridních (hranových a uzlových) konečných prvků ve frekvenční i časové oblasti. Tato metoda je použita pro analýzu vlnovodu parallel-plate, v kterém jsou umístěny dvě dielektrické vrstvy. Jako ukončení vlnovodu je implementována dokonale přizpůsobená vrstva označována PML. Projekt řeší možný výběr PML vrstvy v časové oblasti. Metoda je programována v programu MATLAB a výsledky jsou porovnány s programem COMSOL Multiphysics.
APA, Harvard, Vancouver, ISO, and other styles
6

Kubát, Milan. "Borcení časové osy v oblasti biosignálů." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2014. http://www.nusl.cz/ntk/nusl-220845.

Full text
Abstract:
This work is dedicated to dynamic time warping in biosignal processing, especially it´s application for ECG signals. On the beginning the theoretical notes about cardiography are summarized. Then, the DTW analysis follows along with conditions and demands assessments for it’s successful application. Next, several variants and application possibilities are described. The practical part covers the design of this method, the outputs comprehension, settings optimization and realization of methods related with DTW
APA, Harvard, Vancouver, ISO, and other styles
7

Lábsky, Balázs. "Metody analýzy přenosových struktur v časové oblasti." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-218020.

Full text
Abstract:
This work deals with techniques of time-domain analysis of interconnects. After a studying crucial issue of time-domain analysis of interconnects methods of modeling and simulation simple interconnects in electrotechnics are described. For transient effect analysis two elementary methods can be used: the state variable method and the FDTD (Finite - Difference Time - Domain) method. The FDTD method can be used to solve partial differential equations in time domain, for instance equations of transmission lines. The method is very effective and delivers satisfactory results in case of linear and non-linear lines with a single “live” conductor. The method can be easily programmed in Matlab.
APA, Harvard, Vancouver, ISO, and other styles
8

Peprníčková, Anna. "Absorpční měření nanočástic v IR oblasti." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2013. http://www.nusl.cz/ntk/nusl-220043.

Full text
Abstract:
This diploma thesis is focused on measurements of nanoparticles infrared absorption. In project is made literar research of sensors in part of IR area, principal design of detector controled by microcontroller for measurement absorption properties of solutions of nanoparticles and microparticles in IR area with diode detector and bank of optical filtres. According to this design of device microcontroller and display device was chosen. This work contains program design for microcontroler and display unit.
APA, Harvard, Vancouver, ISO, and other styles
9

Fasora, Pavel. "Modelování vlnovodů metodou konečných prvků v časové oblasti." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-217800.

Full text
Abstract:
The thesis deals with frequency domain finite elements and time domain finite elements. Derivation of the wave equation, generation of the discretization mesh and the composition of matrices for solving wave equation are presented. Exploitation of COMSOL Multiphysics for the analysis of the electromagnetic wave propagation in a wave guide is explained. Finally, in this thesis is described the m-file of MATLAB for analyzing electric field intensity of the waveguide in longitudinal direction to both domain. In last part is concisely exposed perfect match layers.
APA, Harvard, Vancouver, ISO, and other styles
10

Gutovský, Jan. "Experimentální měření v oblasti průmyslového sušení textilu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231375.

Full text
Abstract:
The main aim of this thesis is to provide and explore main factors that affect a drying process. The first part contains brief description of the drying process and focuses on a convectional industrial drying process. The following section discusses the theory of an experiment planning followed by an experiment design of the compact tumble industrial dryer. The thesis also includes an exact description of the executed experiment, then outputs of the measurements and model characterizing the drying process of the tested dryer. The last part deals with the methodology and recommendations for the measurements in operating conditions.
APA, Harvard, Vancouver, ISO, and other styles
11

Novobilský, Petr. "Metoda dynamického borcení časové osy v oblasti zpracování biosignálů." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2008. http://www.nusl.cz/ntk/nusl-217213.

Full text
Abstract:
The thesis deals with one of the non-linear methods for signal processing - dynamic time warping (DTW). The method observes shape changes, which should be used in biomedical signals processing. The thesis involves the method description and consecution for finding DTW optimal way. The method is applied on the number series in the edutainment program, on the group of simulated signals and real electrocardiograms (ECG). ECG recordings were gained by performing experiments on the Masaryk University and their aim was clarifying the influence of voltage-sensitive dye on the heart tissue. One-lead ECG was described in time domain, frequency domain, time-frequency domain and subsequently remitted to DTW algorithm. The method outcomes evaluates the diversity rate of ECG signals obtained in each experiment stages. During the data evaluation were followed up the changes in process of the tension-sensible paint application and the stage of scouring toward control. The difference of elaborating signals group was verified in the time domain (37,5 %), in the frequency domain (75 %) and in the time-frequency domain (25 %). However, due to the small data group was not possible to explicitly approve the activity of voltage-sensitive dye on the heart tissue and to determinate limiting value of minimum algorithm way DTW for each heart round electrocardiogram classification. In the more data group analysis it is supposed to manifest the trend of growth heart round ECG differences in the stage of staining toward the stage of scouring.
APA, Harvard, Vancouver, ISO, and other styles
12

Syrový, Jiří. "Analýza trojrozměrných objektů metodou konečných prvků v časové oblasti." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-219117.

Full text
Abstract:
This thesis is aimed on three-dimensional finite element time domain analysis. Vector finite elements are used for analysis of cavity resonator made from PEC and filled with vacuum. Results are compared with classical “nodal” finite elements and with published literature.
APA, Harvard, Vancouver, ISO, and other styles
13

Cigánek, Jan. "Metoda konečných prvků v časové oblasti a její aplikace." Doctoral thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2014. http://www.nusl.cz/ntk/nusl-233673.

Full text
Abstract:
Disertační práce se zabývá modelováním dispersních materiálů metodou konečných prvků v časové oblasti. V práci jsem navrhl matematický model zahrnující dispersní modely a aplikoval jsem na něj metodu konečných prvků. Pozornost jsem věnoval třem nejvíce používaným dispersním modelům. Jedná se o Debyeho model, Lorentzův model a Drudův model. Dále jsem se zabýval technikami implementace těchto dispersních modelů. Techniky jsem zabudoval do metody konečných prvků. Navíc jsem vyvinul novou metodu založenou na technice digitální filtrace. Funkčnost vyvinutých metod a technik jsem ověřil na řadě testovacích příkladů. Diskutoval jsem dosažené výsledky a navrhuji jejich možná vylepšení.
APA, Harvard, Vancouver, ISO, and other styles
14

Brziaková, Zuzana. "Měření spokojenosti studentů FP VUT v Brně v oblasti zahraničních mobilit." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2014. http://www.nusl.cz/ntk/nusl-224392.

Full text
Abstract:
The diploma thesis deals with international education of tertiary students. It aims to measure satisfaction of tertiary students with current offer and service provided in area of mobility programmes by Faculty of Business and Management of Brno University of Technology. It contains suggestions for the improvement and enhancement of services and programme offer of international activities for students with the aim to increase satisfaction and the number of people interested in activities in a foreign environment.
APA, Harvard, Vancouver, ISO, and other styles
15

Juračka, Zdeněk. "Rozpoznávací metody v oblasti biosignálů." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-217975.

Full text
Abstract:
The thesis is focused on the recognition methods study used in one-dimensional signal processing. A lot of recognition methods exist, this thesis briefly describes the principle of some of them, e.g. artificial neural networks, fuzzy systems, expert systems and decision trees. Dynamic time warping (DTW) method has been chosen for signal processing available from UBMI database. DTW can be used as a non-linear signal processing method. The result of this method is to determine the similarity of two compared signals on the basis of their distance calculation. One of the reasons for choosing this method was the possibility of various length signal processing. The principle of the method as well as the calculation of the distance between two input data sequences is described in the thesis. DTW path finding method is also mentioned. The method was applied on randomly selected numbers and a set of simulated signals. The method was applied to ECG and action potential signals recorded on the isolated rabbit heart. DTW was used to evaluate shape changes of these signals in repeated phases of the experiment known as ischemia and reperfusion. Selected cardiac cycles were detected and included into different experiment phases on the basis of calculated distance results using DTW. Sensitivity was selected as an evaluative criterion of this classification method. It reached a value of 65%. DTW algorithm was further tested on the selected cardiac cycle mapping to the corresponding minute record in the selected experiment phase. It reached a sensitivity of 68.3%. The motion artifact appearance was monitored using DTW on AP signals. The method functioned more precisely on signals measured in ischemia phases. Along with the above mentioned, the thesis discusses all aspects of heart electrical manifestation activities called as ECG signals and action potentials, such as origin, propagation, recording, post-processing and measuring out.
APA, Harvard, Vancouver, ISO, and other styles
16

Kalous, Stanislav. "Shluková analýza v oblasti biosignálů." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2008. http://www.nusl.cz/ntk/nusl-217212.

Full text
Abstract:
This diploma thesis deals with cluster analysis for long-term electrocardiograms (ECG) clustering. The linear filtration is used for ECG preprocessing. The ECG sign segmenting in single heart cycles is based on the detection QRS complex and consequently to an application of dynamic time warping algorithms. To an application of all these mentioned processes and to results interpretation, a program called Cluster analysis has been created in the Matlab background. The results of this diploma thesis confirm that cluster analysis is able to distinguish cardiac arrhythmias which are typical with their shape distinctness of normal heart cycles.
APA, Harvard, Vancouver, ISO, and other styles
17

Jakuš, Matúš. "Tvorba a aplikace algoritmů pro odhad modálních parametrů v časové oblasti a studie jejich citlivosti na okrajové podmínky." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-241728.

Full text
Abstract:
Cieľom tejto diplomovej práce je predstavenie Experimentálnej modálnej analýzy a štúdium a použitie algoritmov pre výpočet modálnych parametrov z odmeraných vibrácií pri Experimentálnej modálnej analýze. Bodom záujmu sú predovšetkým algoritmy, pracujúce s odmeranými dátami v časovej oblasti. Diplomová práca sa zaoberá programovaním algoritmu ITD a jeho implementáciou pre Experimentálnu modálnu analýzu. Ďaľšou časťou práce je štúdium citlivosti algoritmu na okrajové podmienky meranej sústavy pri výpočte modálnych parametrov a štúdium možnosti využitia algoritmu pri Operačnej modálnej analýze.
APA, Harvard, Vancouver, ISO, and other styles
18

Klabal, Petr. "Měření kontrakcí izolovaných srdečních buněk v reálném čase." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2012. http://www.nusl.cz/ntk/nusl-219637.

Full text
Abstract:
Diploma thesis deals with the basic description of cardiac muscle cells, the mechanism of its contraction and events associated with contractions. There are different types of methods which can be used for measuring of contractions and for evaluation of cell length. This work describe these methods and evaluate their pros and cons. Based on available information and technical possibilities is one of the methods chosen and used for the design of block diagram system for measuring of contraction of isolated heart cells in real time. The practical part of this diploma thesis deals with the designing of a system which allows processing the image of isolated cardiac muscle cells that facilitate the detection of the cells edge. For this purpose it was created a device that allows the user to select a single row from television signal containing the image information from a location where is the currently selected row. Thus obtained image information can be used for cells edge detection and measuring of its length and contractions.
APA, Harvard, Vancouver, ISO, and other styles
19

Lojková, Pavlína. "Návrh interní kalibrační laboratoře pro potřeby výrobního závodu v oblasti automotive." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417580.

Full text
Abstract:
The diploma thesis deals mainly with the issue of calibration laboratories in a manufacutring company and calibration procedures for workshop gauges. The current state of the calibration laboratory in the organization is described in this thesis. Part of the creation of calibration procedures is the determination of measurement uncertainties and creation of a sample calibration sheet as a calibration output.
APA, Harvard, Vancouver, ISO, and other styles
20

Čevorová, Nina. "Problematika ROI v oblasti získávání a výběru zaměstnanců." Master's thesis, Vysoká škola ekonomická v Praze, 2010. http://www.nusl.cz/ntk/nusl-77881.

Full text
Abstract:
The paper brings answers on the the question whether it is possible to measure the field of recruitment. Via quantifying the administrative process of recrutment, the paper reflects the savings of time and costs by using e-recruitment application (applicant tracking system ATS) and it searchs for the relationship between quality of hire and increase of company value and its profit.
APA, Harvard, Vancouver, ISO, and other styles
21

Vosecký, Ondřej. "Analýza a návrh optimalizace podnikových procesů v oblasti spisové služby." Master's thesis, Vysoká škola ekonomická v Praze, 2015. http://www.nusl.cz/ntk/nusl-262248.

Full text
Abstract:
This diploma thesis is focused on optimizing administration management in the Czech telecommunication office. The thesis has three essential objectives. The first objective is the analysis of present state of the administration management using the process modelling. The second objective is to identify the real potential for improvements of the process group. That means to specify process priority, estimate current and desired levels of process maturity, identify key activities and determine the level of process description and processing framing tables. These activities are supported by the methodically theoretical text at the first part of the thesis. The evaluation of limits determining potential improvements resulted from previous chapters and is contained in the final part of this thesis. The fundamental objective of this work is to design the optimization of the process group using the form of future projects.
APA, Harvard, Vancouver, ISO, and other styles
22

Kulík, Tomáš. "Modelování nelineárních jevů v ultrazvukových polích." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2012. http://www.nusl.cz/ntk/nusl-219510.

Full text
Abstract:
The main topic of this diploma thesis is the modeling of nonlinear effects in ultrasonic fields. The work deals with application of finite difference method (FDTD) on the Westervelt equation and the subsequent creation of the model of ultrasonic fields in MATLAB. This thesis also includes theoretical analysis of ultra-acoustic and technical aspects of diagnostic ultrasonography. In addition, this document includes verification of theoretical assumptions by using created model.
APA, Harvard, Vancouver, ISO, and other styles
23

Dršata, Martin. "Plazmonické biosenzory založené na zvýšené optické transmisi." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318371.

Full text
Abstract:
Tato diplomová práce se zabývá rigorózními simulacemi plazmonických biosenzorů založených na jevu zvýšené optické transmise. První část je věnována popisu fyzikálních jevů a poznatků, které tvoří základ pro studium vlastností plazmonických senzorů, a popisu výpočetní metody konečných prvků v časové oblasti, která je využita v této práci. Vlastní výsledky jsou uvedeny v další části, která se zabývá výzkumem citlivosti, rozlišení a dalších charakteristik zvoleného typu plazmonického sensoru, tvořeného sítí kruhových nanoděr v tenké zlaté vrstvě na substrátě nitridu křemíku, v závislosti na řadě jeho geometrických parametrů. Tyto závislosti jsou sledovány ve třech různých případech, a to senzoru umístěného ve vakuu, ponořeného ve vodě a v případě kdy je na zlatém povrchu umístěna tenká dielektrická vrstva, která reprezentuje přítomnost biomolekul uchycených na povrchu senzoru.
APA, Harvard, Vancouver, ISO, and other styles
24

Vlásková, Nikola. "Hodnocení kvality sportovních a tělovýchovných služeb." Master's thesis, Vysoká škola ekonomická v Praze, 2013. http://www.nusl.cz/ntk/nusl-198443.

Full text
Abstract:
The subjective of this thesis is to evaluate the quality of sport services in women's volleyball clubs Madeta České Budějovice and german Allgäu Team Sonthofen using SERVQUAL questionnaire. In the theoretical part of the thesis is presented theoretical insights regarding the services, quality of services, services in the field of sport and there is also part focused on methods of measuring customer satisfaction. In the practical part of the thesis are presented results of the questionnaire-based research and design specific measures for improvement in services of volleyball clubs.
APA, Harvard, Vancouver, ISO, and other styles
25

Einšpigel, David. "Modelování globálních barotropních oceánských slapů v časové oblasti." Doctoral thesis, 2017. http://www.nusl.cz/ntk/nusl-354462.

Full text
Abstract:
Traditionally, ocean tides have been modelled in frequency domain with forcing of selected tidal constituents. It is a natural approach, however, non-linearities of ocean dynamics are implicitly neglected. An alternative approach is time-domain modelling with forcing given by the full lunisolar potential, i.e., all tidal constituents are included. This approach has been applied in several ocean tide models, however, a few challenging tasks still remain to solve, for example, the assimilation of satellite altimetry data. In this thesis, we present DEBOT, a global and time-domain barotropic ocean tide model with the full lunisolar forcing. DEBOT has been developed "from scratch". The model is based on the shallow water equations which are newly derived in geographical (spherical) coordinates. The derivation includes the boundary conditions and the Reynolds tensor in a physically consistent form. The numerical model employs finite differences in space and a generalized forward-backward scheme in time. The validity of the code is demonstrated by the tests based on integral invariants. DEBOT has two modes for ocean tide modelling: DEBOT-h, a purely hydrodynamical mode, and DEBOT-a, an assimilative mode. We introduce the assimilative scheme applicable in a time-domain model, which is an alternative to existing...
APA, Harvard, Vancouver, ISO, and other styles
26

Minářová, Jana. "Prostorové a časové rozložení srážek v oblasti Vogéz." Master's thesis, 2013. http://www.nusl.cz/ntk/nusl-325127.

Full text
Abstract:
Spatial and temporal distribution of precipitation in the Vosges mountain range area Abstract The aim of this work is to study the climatology of atmospheric precipitation in the studied area situated in the Northeastern France. Factors, e.g. the global circulation of the atmosphere, that influence the spatial and temporal distribution of precipitation in the mid-latitudes, especially in Western Europe and in mountainous regions, are discussed from the macro- to micro- scale in the first part. The term "ombric continentality" is clarified and a description of the physical geography of the studied area is performed, e.g. upward and windward asymmetry of Vosges slopes and contrasts between the mountain range and the Upper Rhine Plain. Secondly a demonstration is made that the Vosges mountain range affects, due to its position, the spatio-temporal distribution of precipitation at a regional scale. This is carried out by computing the daily rainfall on 14 meteorological stations out of the period 1951-2011. Three categories of stations were determined according to their annual precipitation repartition: (i) mountain stations with the winter precipitation maximum, (ii) leeward slope stations with two precipitation maxima, i.e. in winter and summer and (iii) leeward stations located in the Upper Rhine Plain East...
APA, Harvard, Vancouver, ISO, and other styles
27

Mazal, Jaromír. "Rozbor poškozování lesních porostů těžební činností v oblasti LČR s.p. LS Frýdlant." Master's thesis, 2007. http://www.nusl.cz/ntk/nusl-93783.

Full text
APA, Harvard, Vancouver, ISO, and other styles
28

ŠEBESTA, Karel. "Měření a vyhodnocení síly paravertebrálních svalů v oblasti bederní páteře a svalů dutiny břišní." Master's thesis, 2006. http://www.nusl.cz/ntk/nusl-45593.

Full text
Abstract:
The aim of the work was to measure and evaluate the strength of deep stabilizing system (DSS) in connection with correct body posture and, subsequently, to asses the efficiency of the existing known exercise of the lumbar spine area as well as drawing comparison to the exercise recently introduced by doc. PaedDr. Pavel Kolář. The research was carried out on two sample groups of sixth form boys attending elementary school. It was necessary in the first place to detect, test and document correct body posture and, above all, the functionality of the DSS in members of the respected groups. This was followed by six weeks of active exercise according to exercise programme focusing primarily on the lumber spine area. The control group of ten boys carried out exercises based mainly on general principles of correct exercise whereas the experimental group totalling the same number of boys did exercises of DSS and lumbar spine area according to doc. PaedDr. Pavel Kolář. A muscle dynamometer was used to objectify and check the DSM in lumbar spine area. The measuring was than documented, processed and evaluated by means of charts and graphs. The work also comprises an overview of basic principles of lumbar spine stability as well as a questionnaire designed to assess health and lifestyle.\\
APA, Harvard, Vancouver, ISO, and other styles
29

Hassairi, Munír. "Psychologické aspekty zákaznické spokojenosti v oblasti telekomunikačních služeb." Master's thesis, 2012. http://www.nusl.cz/ntk/nusl-306532.

Full text
Abstract:
1 Abstrakt: This thesis has focused on customer satisfaction. Mainly there are described the attributes that significantly influence the satisfaction. The research is based on service quality of mobile phone operators in Czech Republic. The first part describes the relevant theories in psychology field about satisfaction in different context - life satisfaction, job satisfaction and mainly customer satisfaction. There is mentioned the problem with definition inconsistency among authors and then is provided details about service quality theories and customer satisfaction attributes categorization. Finally there is chapter that concerns about the difference between derived and stated importance of attributes. The research object are the customers that use mobile phone services from three main operators in Czech Republic. The output is derived importance of the attributes which is calculated by multiply regression.
APA, Harvard, Vancouver, ISO, and other styles
30

Chemayelová, Nathalie. "Post konfliktní vývoj v Libanonu v rozmezí období 2006 - 2013 a vliv současné situace na budoucí možný vývoj v oblasti." Master's thesis, 2014. http://www.nusl.cz/ntk/nusl-250862.

Full text
Abstract:
This diploma thesis analysis the post-conflict situation of Lebanon after the war of summer 2006, the time period analysis the development in the country between the years 2006 to 2013. The focus of post-conflict activities is targeted on the role of the peace mission of UN UNIFIL. The paper further analysis the religious structure of the population in Lebanon and its influence on the political system and on the security of Lebanon. In conclusion the paper proposes specific recommendations, which should lead to stabilization of the political system and the security situation in the country.
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography