To see the other types of publications on this topic, follow the link: Metal-dielectric structures.

Dissertations / Theses on the topic 'Metal-dielectric structures'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 dissertations / theses for your research on the topic 'Metal-dielectric structures.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Walasik, Wiktor. "Plasmon-soliton waves in metal-nonlinear dielectric planar structures." Doctoral thesis, Universitat Politècnica de Catalunya, 2014. http://hdl.handle.net/10803/284234.

Full text
Abstract:
In this PhD thesis, we study properties of stationary transverse magnetic polarized waves in structures built of a Kerr-type nonlinear dielectric layer, metal and linear dielectric layers. Although these waves, called here plasmon-solitons, have been studied for more than 30 years, there is still no experimental confirmation of their existence. The main reason being that, in all the configurations predicted so far, the nonlinear index modification required to observe plasmon-solitons corresponds to light intensities orders of magnitude higher than the damage threshold of typical nonlinear mate
APA, Harvard, Vancouver, ISO, and other styles
2

Owens, Daniel Thomas. "Linear and nonlinear optical properties of metal-dielectric multilayer structures." Diss., Georgia Institute of Technology, 2010. http://hdl.handle.net/1853/37235.

Full text
Abstract:
The object of the present research is to design and fabricate metal-dielectric thin film multilayer structures that make use of the nonlinear optical (NLO) response of Ag for efficient nonlinear absorption for sensor protection. These structures employ structural resonances to overcome the challenges of reflection and absorption that limit access to this large NLO response. The research consists of three parts: first, we present a comprehensive analysis of the contributions to the nonlinear optical response of Ag. Second, we present a systematic investigation of the linear optical propertie
APA, Harvard, Vancouver, ISO, and other styles
3

Kulkarni, Shashank Dilip. "MoM modeling of metal-dielectric structures using volume integral equations." Link to electronic thesis, 2004. http://www.wpi.edu/Pubs/ETD/Available/etd-0506104-111936/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Hu, Bing. "FABRICATION AND STUDY OF MOLECULAR DEVICES AND PHOTOVOLTAIC DEVICES BY METAL/DIELECTRIC/METAL STRUCTURES." UKnowledge, 2011. http://uknowledge.uky.edu/gradschool_diss/222.

Full text
Abstract:
A new class of electrodes with nanometer-scale contact spacing can be produced at the edge of patterned metal/insulator/metal this film structures. A key challenge is to produce insulator layers with low leakage current and have pristine metal contacts for controlled molecular contacts. Atomic layer deposition of high quality Al2O3 thin films onto Au electrodes was enabled by surface modification with a self-assembled monolayer of -OH groups that react with a monolayer of trimethylaluminum gas source. Ar ion milling was then used to expose the edge of the Au/dielectric/Au structure for molecul
APA, Harvard, Vancouver, ISO, and other styles
5

McPhee, Graeme. "Surface-Bound Plasmonic and Leaky Electromagnetic Modes of Metal-Dielectric Structures." Thesis, Imperial College London, 2009. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.517370.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Ye, Fan. "Surface plasmon polaritons along metal surfaces with novel structures." Thesis, Boston College, 2014. http://hdl.handle.net/2345/bc-ir:103747.

Full text
Abstract:
Thesis advisor: Michael J. Naughton<br>Surface plasmon polaritons (SPPs) are hybridized quasiparticles of photons and electron density waves. They are confined to propagate along metal-dielectric interfaces, and decay exponentially along the direction perpendicular to the interfaces. In the past two decades, SPPs have drawn intensive attention and undergone rapid development due to their potential for application in a vast range of fields, including but not limited to subwavelength imaging, biochemical/biomedical sensing, enhanced light trapping for solar cells, and plasmonic logic gates. Thes
APA, Harvard, Vancouver, ISO, and other styles
7

Ng, Matthew Y. K. "Coupling of excited molecules to surface plasmon and other modes of dielectric/metal structures." Thesis, Imperial College London, 2010. http://hdl.handle.net/10044/1/11847.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Hsu, James June Fan. "Engineered linear and nonlinear optical properties of metal-dielectric thin-film structures for ultrafast optical applications." Diss., Georgia Institute of Technology, 2013. http://hdl.handle.net/1853/50317.

Full text
Abstract:
The objective of the present dissertation is to advance the science and engineering of metal-dielectric thin-film structures for ultrafast all-optical applications. The research presented consists of three parts: first, the linear and nonlinear optical (NLO) properties of Au and Ag/Au bilayer metallic thin films are comprehensively studied; then the design and properties of a novel nonlinear device structure are presented and finally an ultrafast all-optical shutter is developed and applications are discussed. In the first part, this study describes the linear and NLO properties of bilayer met
APA, Harvard, Vancouver, ISO, and other styles
9

Воробйов, Геннадій Савелійович, Геннадий Савельевич Воробьев, Hennadii Saveliiovych Vorobiov та ін. "К вопросу о моделировании черенковского и дифракционного излучений на периодических металлодиэлектрических структурах". Thesis, Сумский государственный университет, 2015. http://essuir.sumdu.edu.ua/handle/123456789/40788.

Full text
Abstract:
В настоящее время вакуумная СВЧ электроника в основном развивается по пути создания мощных высоко-когерентных источников электромагнитного излучения, например, ортотрон, генератор дифракционного излучения, лазер на свободных электронах. Вместе с тем, в радиоастрономических инструментах терагерцового диапазона волн требуются источники излучения обладающие достаточной компактностью, малой массой и мощностью потребления.
APA, Harvard, Vancouver, ISO, and other styles
10

Ceballos, Sanchez Oscar. "Stabilité thermique de structures de type TiN/ZrO2/InGaAs." Thesis, Université Grenoble Alpes (ComUE), 2015. http://www.theses.fr/2015GREAY027/document.

Full text
Abstract:
Les semiconducteurs composés III-V, et en particulier l’InGaAs, sont considéréscomme une alternative attractive pour remplacer le Silicium (Si) habituellement utilisépour former le canal dans les dispositifs Métal-Oxide-Semiconducteur (MOS). Sa hautemobilité électronique et sa bande interdite modulable, des paramètres clés pourl’ingénierie de dispositifs à haute performance, ont fait de l’InGaAs un candidatprometteur. Cependant, la stabilité thermique et la chimie des interfaces desdiélectriques high-k sur InGaAs est beaucoup plus complexe que sur Si. Tandis que laplupart des études se concent
APA, Harvard, Vancouver, ISO, and other styles
11

Zhang, Yan. "Theoretical study of the transition-metal oxides Pb2FeMoO6 and ZrO2." Thesis, Paris 11, 2014. http://www.theses.fr/2014PA112209.

Full text
Abstract:
Ces dernières années, les oxydes de métaux de transition ont suscité de grands intérêts du point de vue fondamental et technologique. A cet égard, nous nous concentrons sur deux types d'oxydes : le première, le Perovskite double Pb2FeMoO6, avec un potentiel d'application sur des appareils magnétorésistances et spintroniques ; le deuxième, la zircone ZrO2 avec de excellentes propriétés mécaniques et diélectriques pour être utilisée dans les domaines de matériaux structuraux et fonctionnels. Dans la présente étude, nous utilisons la méthode ab-initio (first-principles calculation) pour étudier l
APA, Harvard, Vancouver, ISO, and other styles
12

Белявий, О. Р. "Моделювання дифракційно-черенковського випромінювання в метало-діелектричних структурах". Master's thesis, Сумський державний університет, 2020. https://essuir.sumdu.edu.ua/handle/123456789/81644.

Full text
Abstract:
Метою дипломної роботи є моделювання дифракційно-черенковського випромінювання в метало-діелектричних структурах. Розглянуто сучасні досягнення та дослідження дифракційного та черенковського випромінювання. Проведено комп’ютерне моделювання дифракційно-черенковського випромінювання в електродинамічній системі діелектрична призма – діелектричний хвилевод. Встановлені загальні закономірності залежності гармонік дифракційно-черенковського випромінювання від діелектричної проникності, геометричних параметрів діелектричної призми та параметрів хвилеводу. Робота викладена на 109 сторінках, в том
APA, Harvard, Vancouver, ISO, and other styles
13

Carli, Marta. "Meso- and nano-structured metal-dielectric interfaces for plasmonic nanofocusing." Doctoral thesis, Università degli studi di Padova, 2013. http://hdl.handle.net/11577/3423458.

Full text
Abstract:
With increasing demand for nanoscale optical devices, the ability to confine the light on length scales smaller than those allowed by the diffraction limit of light has begun to attract enormous interest. A possible solution to this problem is offered by Plasmonics. Under certain conditions, a metal-dielectric interface supports Surface Plasmons (SPs), i.e. electromagnetic excitations strongly coupled to oscillations of free electrons in the metal. Thanks to these excitations, electromagnetic energy can be confined in a sub-wavelength volume close to the metal surface. This opens up the way f
APA, Harvard, Vancouver, ISO, and other styles
14

Ignatov, Yury. "Phénomènes hyperfréquences et nonlinéaires dans les structures actives ferromagnétiques planaires." Phd thesis, Ecole Centrale de Lille, 2012. http://tel.archives-ouvertes.fr/tel-00741407.

Full text
Abstract:
Les récentes découvertes sur les phénomènes hyperfréquences et nonlinéaires dans les structures minces ferromagnétiques actives planaires ont fait émerger un grand nombre de nouvelles études et applications pratiques prometteuses. La conversion de l'énergie magnétoélastique peut être beaucoup plus efficace à proximité de la transition de réorientation de spin (TRS). Les structures minces ferromagnétiques actives planaires fournissent un grand nombre de caractéristiques haute fréquence uniques : par exemple, les conditions pour l'effet Doppler anomal peuvent être satisfaites. Les cristaux magno
APA, Harvard, Vancouver, ISO, and other styles
15

Рубан, Анатолій Іванович, Анатолий Иванович Рубан, Anatolii Ivanovych Ruban та Д. Ю. Дорошенко. "Дослідження дифракційно-черенковського випромінювання на періодичних металодіелектичних структурах". Thesis, Видавництво СумДУ, 2012. http://essuir.sumdu.edu.ua/handle/123456789/27643.

Full text
APA, Harvard, Vancouver, ISO, and other styles
16

Kalbitz, René. "Stability of polarization in organic ferroelectric metal-insulator-semiconductor structures." Phd thesis, Universität Potsdam, 2011. http://opus.kobv.de/ubp/volltexte/2011/5727/.

Full text
Abstract:
Organic thin film transistors (TFT) are an attractive option for low cost electronic applications and may be used for active matrix displays and for RFID applications. To extend the range of applications there is a need to develop and optimise the performance of non-volatile memory devices that are compatible with the solution-processing fabrication procedures used in plastic electronics. A possible candidate is an organic TFT incorporating the ferroelectric co-polymer poly(vinylidenefluoride-trifluoroethylene)(P(VDF-TrFE)) as the gate insulator. Dielectric measurements have been carried out o
APA, Harvard, Vancouver, ISO, and other styles
17

Huang, Jianqiu. "First-Principles Study of Band Alignment and Electronic Structure at Metal/Oxide Interfaces: An Investigation of Dielectric Breakdown." Diss., Virginia Tech, 2018. http://hdl.handle.net/10919/95967.

Full text
Abstract:
Oxide dielectric breakdown is an old problem that has been studied over decades. It causes power dissipations and irreversible damage to the electronic devices. The aggressive downscaling of the device size exponentially increases the leakage current density, which also raises the risk of dielectric breakdown. It has been proposed that point defects, current leakages, impurity diffusions, etc. all contribute to the change of oxide chemical composition and ultimately lead to the dielectric breakdown. However, the conclusive cause and a clear understanding of the entire process of dielectric bre
APA, Harvard, Vancouver, ISO, and other styles
18

Gao, Hantian. "Nanoscale Characterization and Control of Native Point Defects in Metal Oxide Semiconductors and Device Structures." The Ohio State University, 2021. http://rave.ohiolink.edu/etdc/view?acc_num=osu1618838504594148.

Full text
APA, Harvard, Vancouver, ISO, and other styles
19

Петровський, Михайло Васильович, Михаил Васильевич Петровский, Mykhailo Vasylovych Petrovskyi та ін. "Селективные свойства двухрядных периодических структур миллиметрового диапазона волн". Thesis, Вебер, 2014. http://essuir.sumdu.edu.ua/handle/123456789/38324.

Full text
Abstract:
Представлены результаты моделирования преобразования поверхностных волн диэлектрического волновода в объемные на двухрядных периодических структурах различных модификаций. Показана возможность эффективной регулировки мощности излучаемых гармоник и селекции колебаний для исследуемых структур.<br>The results of modeling transformation of surface waves of a dielectric waveguide into spatial waves on different modifications of the double-row periodic structures are presented. Possibility of effective radiated power control of harmonics and selection of oscillations for the investigated structures
APA, Harvard, Vancouver, ISO, and other styles
20

Persson, Stefan. "Modeling and characterization of novel MOS devices." Doctoral thesis, KTH, Microelectronics and Information Technology, IMIT, 2004. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-3720.

Full text
Abstract:
<p>Challenges with integrating high-κ gate dielectric,retrograde Si<sub>1-x</sub>Ge<sub>x</sub>channel and silicided contacts in future CMOStechnologies are investigated experimentally and theoreticallyin this thesis. ρMOSFETs with either Si or strained Si<sub>1-x</sub>Gex surface-channel and different high-κgate dielectric are examined. Si<sub>1-x</sub>Gex ρMOSFETs with an Al<sub>2</sub>O<sub>3</sub>/HfAlO<sub>x</sub>/Al<sub>2</sub>O<sub>3</sub>nano-laminate gate dielectric prepared by means ofAtomic Layer Deposition (ALD) exhibit a great-than-30% increasein current drive and peak transconduc
APA, Harvard, Vancouver, ISO, and other styles
21

Петровський, Михайло Васильович, Михаил Васильевич Петровский, Mykhailo Vasylovych Petrovskyi та ін. "К вопросу уточнения теории расчета электродинамических характеристик планарных периодических металлодиэлектрических структур". Thesis, Вебер, 2013. http://essuir.sumdu.edu.ua/handle/123456789/38333.

Full text
Abstract:
В приближении заданного тока для строгой математической постановки получена система линейных уравнений, которая позволяет при произвольных параметрах планарной периодической металлодиэлектрической структуры, провести сравнительный анализ характеристик возбуждаемых гармоник дифракционного излучения.<br>The system of linear equations in the approximation of a given current for a rigorous mathematical formulation was obtained. It allows conducting a comparative analysis of the characteristics of the excited diffraction radiation harmonics for arbitrary parameters of a planar periodic metal-dielec
APA, Harvard, Vancouver, ISO, and other styles
22

Sternberg, Oren. "Resonances of periodic metal-dielectric structures at the infrared wavelength region." Thesis, 2002. http://library1.njit.edu/etd/fromwebvoyage.cfm?id=njit-etd2002-081.

Full text
APA, Harvard, Vancouver, ISO, and other styles
23

Lee, Wei-Che, and 李維哲. "Design and Analysis of Optical Filters with Dielectric-Metal Layered Structures." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/97789656044817655277.

Full text
Abstract:
碩士<br>國立臺灣師範大學<br>光電科技研究所<br>102<br>Photonic crystals, artificially periodic layered structures, have attracted much attention in the past two decades in the photonic community. In this thesis, based on the use of photonic crystal structures, we propose two filter structures which could be of technical use in photonic applications. The first part is to exploit the transfer matrix method(TMM)to design and simulate the filtering properties of antireflection coating (ARC) on silicon substrate. We have made several analyses on the three-layer and four-layer ARC structures. The ARC filter is desig
APA, Harvard, Vancouver, ISO, and other styles
24

Chao, Po Hsuan, and 趙柏軒. "Application of Silver Nanoparticles to Metal-Dielectric-Metal Structures for Full Spectrum White-Light Devices." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/8uf3cc.

Full text
APA, Harvard, Vancouver, ISO, and other styles
25

Shih-Hung, Kang, and 康詩鴻. "Studies of Applications and Structures in Dielectric-Metal Photonic Crystal Band Gap." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/46419096847910136644.

Full text
Abstract:
碩士<br>國立臺灣師範大學<br>光電科技研究所<br>102<br>Photonic crystals (PCs) is made of materials having different refractive indices with periodical or non-periodical arrangement. Photonic band gaps (PBGs) is most fundamental properties of photonic crystals (PCs). When the frequency of electromagnetic wave falls on photonic band gaps (PBGs), the electromagnetic wave can not propagate in the photonic crystal structure. We use metal materials to design photonic crystal and study their properties. We also calculate the transmission, absorption and reflection of the correspondence with the frequency of the incide
APA, Harvard, Vancouver, ISO, and other styles
26

Chen, Yun-Ta, and 陳運達. "Optical properties of surface plasma wave in metal and dielectric layered structures." Thesis, 2015. http://ndltd.ncl.edu.tw/handle/46745219273443664179.

Full text
Abstract:
碩士<br>國立臺灣師範大學<br>光電科技研究所<br>103<br>In this thesis, we use the Kretshmann structure and the bilayer metallic structure to excite the surface plasma waves (SPW), respectively. The materials used are Ag, LiF, Au, ITO, and InN. By changing the wavelength of the incident light, the thin film materials and their thicknesses, we can study the optical properties of the surface plasma wave. In Chapter 2, we first study the basic properties of the SPW, including the excitation of SPW, long-range SPW, and the dispersion relation of symmetric structure. The properties such as the resonance angle displace
APA, Harvard, Vancouver, ISO, and other styles
27

Fan, Wan Ting, and 范菀庭. "Fabrication and characterization of surface plasmon resonance sensors incorporated with metal/dielectric/metal surface plasmon structures." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/71287521979993452453.

Full text
Abstract:
碩士<br>長庚大學<br>光電工程研究所<br>102<br>he enhancement of sensitivity and precision of surface plasmon resonance (SPR) sensors by metal/dielectric/metal (MDM) structures was investigated in this work. Based on numerical simulation, both the MDM SPR sensors with appropriate parameters and the traditional SPR sensors were fabricated. The full width at half maximum of the MDM SPR sensor under angular interrogation was found to be narrower than that of traditional SPR sensor both in numerical simulation and in practice. In addition, a novel MDM SPR sensor featured with the function of self-correction was
APA, Harvard, Vancouver, ISO, and other styles
28

Lin, Grow Chen, and 林國丞. "Characteristics of metal/insulator/Si Structures of Gate dielectric for Capping Layer with ZrN." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/14695466644617192667.

Full text
Abstract:
碩士<br>亞洲大學<br>光電與通訊學系<br>102<br>In this study, the use of experiment planning in the silicon substrate by sputtering (co-sputtering) deposition of 7 nm insulating layer of hafnium and zirconium oxide (HfZrO4), then by sputtering and high-power magnetron sputtering (HIPIMS) deposition a layer of 1.5 nm layer of a metal cap (Capping layer) of ZrN and then deposition a metal layer of titanium (TiN), and then the sample were then made a rapid thermal annealing (RTA) of 550 °C 、700 °C、 850 °C, after deposition aluminum (Al) as an electrode, so a gate electrode. Next on using by the current - volta
APA, Harvard, Vancouver, ISO, and other styles
29

Liao, Chung-Chi, and 廖崇吉. "Properties of coupled surface plasmon polaritons in metal-dielectric-metal structures and their potential application in opto-electronic devices." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/44547676271748911915.

Full text
Abstract:
博士<br>國立臺灣科技大學<br>電子工程系<br>102<br>In this thesis, the properties of surface plasmon-polaritons (SPPs) in symmetrical metal-dielectric-metal (MDM) structures were investigated and their applications in opto-electronic devices were realized. The numerically obtained dispersion relations are found to be highly tunable by varying the dielectric thickness and to cross the left of air light line, which indicates the SPPs are radiative in specific condition. The emission properties of an organic layer embedded in a metal-organic-metal (MOM) structure were investigated. Because of the competition by t
APA, Harvard, Vancouver, ISO, and other styles
30

Wang, Jyh-Yang. "Numerical Simulation on Periodic Metal/Dielectric Structures Using Plane-Wave-Assisted Boundary Integral-Equation Method." 2007. http://www.cetd.com.tw/ec/thesisdetail.aspx?etdun=U0001-2507200721071000.

Full text
APA, Harvard, Vancouver, ISO, and other styles
31

Wang, Jyh-Yang, and 王志洋. "Numerical Simulation on Periodic Metal/Dielectric Structures Using Plane-Wave-Assisted Boundary Integral-Equation Method." Thesis, 2007. http://ndltd.ncl.edu.tw/handle/99151626677473293406.

Full text
Abstract:
博士<br>臺灣大學<br>電信工程學研究所<br>95<br>A novel hybrid numerical technique is proposed for analyzing general 2D electromagnetic problems with 1D gratings. The proposed method combines the conventional boundary integral-equation method (BIEM) with the plane-wave-expansion technique, taking the benefit from either method. In the framework of the proposed method, the BIEM is in charge of formulating the major part of the problem containing the grating structure, while the plane-wave expansion is for describing the nature of the outgoing wave and truncating the computation domain in the direction perpendi
APA, Harvard, Vancouver, ISO, and other styles
32

Hsu, Chiao-Wei, and 徐喬威. "Resonant Coupling of TE Wave Incidence to Asymmetric Metal-Dielectric Multilayered Structures at Optical Frequencies." Thesis, 2013. http://ndltd.ncl.edu.tw/handle/86518907113110269070.

Full text
Abstract:
碩士<br>國立中央大學<br>光電科學與工程學系<br>101<br>This thesis employs the transmission line theory and a commercial software package based on Finite-Difference-Time-Domain method to investigate the transverse electric (TE) wave incidence upon two-dimensional planar metal-dielectric multilayered structures at optical frequencies. Results from both approaches show that a minimum reflectance could occur due to the resonant coupling between the incident electromagnetic wave and a guided mode in the high-index layer. From the guided-wave theory, since the phase accumulated by the wave at two boundaries in the gu
APA, Harvard, Vancouver, ISO, and other styles
33

Liao, Yu-Hao, and 廖于豪. "Investigation of Metal-Oxide-Semiconductor AlGaAs/InGaAs Pseudomorphic High Electron Mobility Transistors with HfO2 Gate Dielectric Structures." Thesis, 2012. http://ndltd.ncl.edu.tw/handle/u5a66b.

Full text
Abstract:
碩士<br>逢甲大學<br>電子工程所<br>100<br>The research is mainly investigated on high-k layer with oxide layer for AlGaAs/InGaAs high electron mobility transistors (HEMTs). In this work, we have an effective method of the ozone water treatment and sputtering Hafnium oxide layer to improve the characteristics of device. The HfO2 dielectric layer is used to enhance the current density, and we can get large drive current characteristics of device. This technology combines advantage of the HfO2 gate dielectric layer and oxide layer, and then compare with the MOS-HEMT and conventional HEMT. Experiment results
APA, Harvard, Vancouver, ISO, and other styles
34

Chen, Hung-Lu, and 陳弘履. "Study on the Characteristics of Surface Plasmon Coupling with a Dipole in Air/metal/dielectric Nano-grating Structures." Thesis, 2008. http://ndltd.ncl.edu.tw/handle/19441564024355158689.

Full text
Abstract:
碩士<br>國立臺灣大學<br>光電工程學研究所<br>96<br>In this thesis, the dipole-surface plasmon (SP) coupling-induced dipole radiation rate enhancements over the spectral range of 400-800 nm in two air/Ag/dielectric grating nanostructures and two dipole positions based on the boundary integral-equation method are evaluated. Three kinds of SP coupling feature are identified, including plane-wave-excited surface plasmon polariton (SPP), dipole-excited SPP, and localized surface plasmon (LSP). Also, the emission enhancements of the dipole-SP coupling systems of those problem geometries on the dipole position side a
APA, Harvard, Vancouver, ISO, and other styles
35

Chen, Hung-Lu. "Study on the Characteristics of Surface Plasmon Coupling with a Dipole in Air/metal/dielectric Nano-grating Structures." 2008. http://www.cetd.com.tw/ec/thesisdetail.aspx?etdun=U0001-2607200812385200.

Full text
APA, Harvard, Vancouver, ISO, and other styles
36

Jiang, Yu-Wei, and 江昱維. "Effects of Hole Shapes on Transmission Properties of Metal/Dielectric Structures with Perforated Top Metals and Their Applications to Infrared Thermal Emitters and Optical Filter Devices." Thesis, 2010. http://ndltd.ncl.edu.tw/handle/78265178779887028250.

Full text
Abstract:
博士<br>國立臺灣大學<br>電子工程學研究所<br>98<br>The extraordinary transmission through silver film perforated with rectangular hole array with different aspect ratio is investigated. The propagating surface plasmon polaritons (SPPs) is observed to transform to localized resonance mode when the aspect ratio exceeds 7. The role of the Wood’s anomaly on the shape of the transmission spectrum is also investigated. The transmission peak of the localized resonance is fitted quite well with the theoretical calculation using a simplified transmission-line model. Additionally, the emission spectra of Ag/SiO2/Ag tri-
APA, Harvard, Vancouver, ISO, and other styles
37

Huang, Yi Luen, and 黃奕綸. "Study of surface plasmon coupling in metal/dielectric/metal structure." Thesis, 2011. http://ndltd.ncl.edu.tw/handle/63836794510372030923.

Full text
Abstract:
碩士<br>長庚大學<br>光電工程研究所<br>99<br>In this thesis, the main research of the surface plasma coupling in metal/dielectric/metal structure, divided into Angle-dependent reflectivity, and wavelength-dependent angle, to explore the surface plasmon characteristics of double gold films clip of different thickness of the SiO2 samples. First, we explore the simulation of surface Plasmon results by double symmetrical gold film with different thickness of SiO2 sample, we can find the SiO2 thickness range in which we can measure in the machine table and simulated results based on samples made to measure.
APA, Harvard, Vancouver, ISO, and other styles
38

Tai, Chen-Yu, and 戴振宇. "Investigation on Metal Gate/Hafnium-Based Dielectric Structure." Thesis, 2008. http://ndltd.ncl.edu.tw/handle/45760298164878899746.

Full text
Abstract:
碩士<br>國立交通大學<br>電子工程系所<br>97<br>Until today, even if Intel Corporation already manufactured their product with hafnium-based high dielectric constant (high-k) dielectric, the characteristics of it are not totally understood. The unexpected interlayer results from direct deposited high-k gate dielectric film on underlying silicon substrate causes deterioration of carrier mobility due to the inferior interface. For better interface and adhesion consideration, insertion of interlayer between high-k dielectric and silicon substrate by introducing pre-gate dielectric deposition treatment is an inev
APA, Harvard, Vancouver, ISO, and other styles
39

Wang, Wan Chieh, and 王莞潔. "Sensitivity Enhancement of Surface Plasmon Resonance Biosensors by Metal/Dielectric/Metal Structure." Thesis, 2013. http://ndltd.ncl.edu.tw/handle/77368885120805135324.

Full text
Abstract:
碩士<br>長庚大學<br>光電工程研究所<br>101<br>In this thesis, the main research of the sensitivity enhancement of surface plasmon resonance biosensors by Metal/Dielectric/Metal structure divided into angle-dependent reflectivity, the buffer-dependent reflectivity, to explore the sensitivity of the Metal/Dielectric/Metal structure. First, we explore the simulation of the different sensitivity between Metal/Dielectric/Metal structure and single metal structure, we can find the better thickness of samples in which we can measure and simulated results based on samples made to measure. For enhance adhesion f
APA, Harvard, Vancouver, ISO, and other styles
40

Chang, Tzu-Han, and 張茲翰. "Plasmonic properties of metal/dielectric grating hybrid nano-structure." Thesis, 2012. http://ndltd.ncl.edu.tw/handle/16489916544271045920.

Full text
Abstract:
碩士<br>國立臺灣大學<br>應用物理所<br>100<br>Plasmonics metallic nanostructures can confine and manipulate light down to nanoscale, and give promising scenarios for nanophotonic applications. In this thesis, we have designed and fabricated a new hybrid nanostructure, dielectric-embedded metallic grating, via large patterning nanoimprimt lithog- raphy technique. The plasmonics properties of Fabry-Perot resonance in such device are investigated both experimentally and theoretically. The anticross- ing behavior due to the strong coupling between the surface plasmon polari- tons and Fabry-Perot resonace is obs
APA, Harvard, Vancouver, ISO, and other styles
41

Mohanty, Smruti Ranjan. "Structural and Dielectric Studies of Layered Transition Metal Oxides." Thesis, 2015. http://ethesis.nitrkl.ac.in/7120/1/Structural_Mohanty_2015.pdf.

Full text
Abstract:
We want to study the effect when an alkali material Sr is substituted on rare earth material site site of Nickelate and Cobaltate. The samples are primed by Sol-gel method. The structural analysis of the samples is done by detail Rietveld analysis of XRD data by which represents the samples are in single phase. The granular information and size is surveyed through SEM analysis. The band gap of both Cobaltate and Nickelate is measured by UV Visible spectroscopy technique which shows that the samples are semiconducting in nature. The dielectric measurement of two samples is done to find out diel
APA, Harvard, Vancouver, ISO, and other styles
42

Huang, Chao-Jian, and 黃朝鍵. "Parallel Computing for Complex-Structured Metal-Dielectric Interconnected Capacitance Extraction." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/6c87u2.

Full text
Abstract:
碩士<br>國立臺灣大學<br>應用力學研究所<br>106<br>As IC processing enters into nano scaled, parasitic capacitance between the metal wires can not be ignored. Therefore, the purpose of this study is to develop a fast and accurate stochastic solver for extracting 2D and 3D multi metal-dielectric interconnect capacitances. The development of the algorithm in this study is based on the squared-shaped random walk, combing Stop at Interface method proposed by Chang,C.C. et al (originated from Lin,Y,B’s master thesis), the approach of the chance of walking on the interface from document Coz, and the method of numeri
APA, Harvard, Vancouver, ISO, and other styles
43

Lin, Zheng-Ying, and 林政穎. "Band Structure and Mode Analysis of Metal/Dielectric Double Gyroid." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/329z9c.

Full text
Abstract:
碩士<br>國立清華大學<br>光電工程研究所<br>105<br>Gyroid is a type of three-dimensional chiral structure that has been found in many insect species. Due to the periodic and chiral structure, the gyroid has been shown to exhibit photonic band gap and circular polarization dependent characteristics. Previous results show that the optical properties of the double gyroid can be tuned by refractive index contrast of the constituent materials or the volume fraction. However, double gyroid structures are mainly studied based on one constituent material, either dielectric or metal. The influence of different material
APA, Harvard, Vancouver, ISO, and other styles
44

Pramanik, Sourav. "Metal Nanoparticles Doped Dielectric Thin Films : Synthesis, Structure and Application." Thesis, 2014. http://cgcri.csircentral.net/3162/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
45

Chen, Yi-Chun, and 陳怡君. "Directional Beaming by Interaction of Dielectric Nano Surface Structure and Metal :." Thesis, 2004. http://ndltd.ncl.edu.tw/handle/99402421552688989105.

Full text
Abstract:
碩士<br>國立臺灣大學<br>應用力學研究所<br>92<br>Based on the Extraordinary transmission and directional beaming phenomena proposed by Ebbesen et al, novel optical head structures are presented. Non-metal optical head composed of dielectric surface grating on a metallic thin film was proposed. In this thesis, simulation tools and experiments were carried out to prove that non-metal optical head works as metal optical head previously reported. Analyzing the simulation results, surface plasma is shown to play an important role in the directional beaming phenomenon. The main reason for designing non-m
APA, Harvard, Vancouver, ISO, and other styles
46

Yeh, Sang-Hung, and 葉上弘. "Thermal Mechanical Analysis of Metal/Dielectric Pad Structure in DRAM Chip." Thesis, 2007. http://ndltd.ncl.edu.tw/handle/69944527230095387512.

Full text
Abstract:
碩士<br>國立清華大學<br>動力機械工程學系<br>95<br>With the increase of need for high-function electronic devices such as DRAM chip, electronic devices are being pushed towards high density, lightweight and miniaturization. To attain the goal, a fine circuit rule and high speed device are generally required. As the line space and width of IC interconnect continue decreasing, the parasitic capacitance and resistance of devices would correspondingly increase and, unfortunately, result in the increase of RC delay. It can be however improved by using copper (Cu) metallization and low dielectric materials. However,
APA, Harvard, Vancouver, ISO, and other styles
47

Wang, Chao, and 王超. "Metal-Dielectric-Metal Structure Based Schottky Barrier Surface Plasmon Resonance Biosensor: Design, Fabrication, and Verification." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/09905301900336111205.

Full text
Abstract:
碩士<br>國立臺灣大學<br>醫學工程學研究所<br>105<br>We proposed a Metal-Dielectric-Metal structure based Surface Plasmon Resonance Biosensor in this thesis. Surface Plasmon Resonance (SPR) is a physical phenomenon which can be described as a result of interactions occurring at metal-dielectric interface between infrared or visible frequency electromagnetic waves and surface charges in the metal. The most useful merit of SPR, being extremely sensitive to the complex refractive index changing near the interface within a distance range from ~10nm to ~100nm, make SPR become an intensively studied and developed bi
APA, Harvard, Vancouver, ISO, and other styles
48

Ren, Je-Min, and 任哲民. "A New Stochastic Solver for Complex-Structured Metal-Dielectric Interconnected Capacitance Extraction." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/pf2y2v.

Full text
Abstract:
碩士<br>國立臺灣大學<br>應用力學研究所<br>105<br>The study is aimed to develop a new fast and accurate stochastic algorithm for extracting the electric capacitance of-non-rectangular metal-dielectric interconnect. The elements of the new stochastic solver for rectangular interconnects comprise (i) a known block algorithm for the Laplace equation without and with interface (Coz et al.), (Yu et al.) combined with (ii) a pausing algorithm at the Interface between dielectrics to definitely capture the effect of the interface (Chang et al.), and (iii) a new boundary treatment (Chang et al.) based on a Green’s fun
APA, Harvard, Vancouver, ISO, and other styles
49

Chen, Chien-Chi, and 陳建圻. "Metal-Dielectric Three Dimensional Helical Octagon Structure: Fabrication and Analysis of Absorption Property." Thesis, 2012. http://ndltd.ncl.edu.tw/handle/23p3s2.

Full text
Abstract:
碩士<br>國立臺北科技大學<br>光電工程系研究所<br>100<br>Due to the development of metamaterials growing to three-dimensional structure, broadband and wide-angle absorption is a goal for every researcher. In this paper, we use the electron beam evaporation with glancing angle deposition and bideposition technology to fabricate dielectric-metal composite three dimensional octagon nanostructure for different size and thickness which can reach the broadband and wide-angle absorption. We use SEM to observe samples’ top view and cross section is similar to helical and the metal part looks like crescent moon. The film’
APA, Harvard, Vancouver, ISO, and other styles
50

Sannigrahi, Jhuma. "Study of magnetic and dielectric properties of 3d transition metal oxides." Thesis, 2019. http://hdl.handle.net/10821/8286.

Full text
Abstract:
Transition metal compounds present a unique class of solids with complex and diverse thermodynamic properties. 3d transition metal oxides exist with a great variety of crystal structures, which are reflected in the richness of their physical properties. The orbital states of 3d electrons are to a large extent responsible for the complex relationship between the electronic properties and crystal structure. This complexity and diversity are the indication of strong interplay between electronic, lattice, orbital and spin degrees of freedom. The magnetic ground states of these oxides depend strong
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!