Relevant bibliographies by topics / Metal Powder Report

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Metal Powder Report'

Author: Grafiati
Published: 3 June 2025
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Metal Powder Report.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Metal Powder Report"

1

Dowson, A. G. (Gordon). "Fifty years of Metal Powder Report." Metal Powder Report 50, no. 12 (1995): 12–13. http://dx.doi.org/10.1016/0026-0657(95)80017-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Bland, Stewart. "A new look for Metal Powder Report." Metal Powder Report 70, no. 1 (2015): 1. http://dx.doi.org/10.1016/j.mprp.2014.12.055.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kim, Sang Youl, Norbert Babcsán, Duck Kyu Ahn, Yeong Hwan Song, and Bo Young Hur. "Corelationship Between Powder Metallurgy and Casting Method Using SiC Powder for Metal Foam." Materials Science Forum 534-536 (January 2007): 945–48. http://dx.doi.org/10.4028/www.scientific.net/msf.534-536.945.

Full text
Abstract:
Metal foams are not easy to use as materials as their manufacturing process involves all three, solid, liquid and gaseous phases occurring simultaneously at varying temperatures and moreever the morphology of the solidified foam is quite complex. There has not been any report on the stabilization of metal foams. To compare the stabilisation of metal foams using a different method, powder metallurgy and casting method using SiC and Ca alloy particle are required. Our investigation results showed deeply etched valleys with high oxygen content and secondary phases attached to line-shaped pores wi
APA, Harvard, Vancouver, ISO, and other styles
4

Komarneni, Sridhar, Rajyalakshmi Pidugu, Qing Hua Li, and Rustum Roy. "Microwave-hydrothermal processing of metal powders." Journal of Materials Research 10, no. 7 (1995): 1687–92. http://dx.doi.org/10.1557/jmr.1995.1687.

Full text
Abstract:
Novel microwave-hydrothermal processing has been developed by us recently for the synthesis of a wide variety of ceramic powders. Herein, we report the use of microwave-hydrothermal processing to synthesize several metal powders such as Cu, Ni, Co, and Ag by reducing their corresponding metal salts or hydroxides with ethylene glycol. Metal powders have been produced extremely rapidly a (few minutes) by microwave catalysis. The kinetics of metal powder synthesis have been increased by at least an order of magnitude by microwave-hydrothermal processing compared to the conventional refluxing proc
APA, Harvard, Vancouver, ISO, and other styles
5

Wang, Chuansheng, Ning Cai, Dewei Zhang, et al. "Preparation of optimum degreasing–sintering process for metal–polymer blending low temperature 3D printing." Rapid Prototyping Journal 25, no. 3 (2019): 515–29. http://dx.doi.org/10.1108/rpj-03-2018-0071.

Full text
Abstract:
Purpose This purpose of this study was to develop a 3D printer based on powder particle. The best degreasing and sintering process of a blank body was investigated to obtain a metal product with high precision and high surface finish. This process will greatly reduce the difficulty and cost of forming a complex metal product with high application value. Design/methodology/approach Stainless steel powder and polymer materials were mixed using a rubber mixing machine. The powders were granulated to prepare a mixed material. A powder feed 3D printer was used at low temperature (about 200°C) to pr
APA, Harvard, Vancouver, ISO, and other styles
6

Hatti, Gururaj, Gangarekaluve J. Naveen, Vishwanath Koti, et al. "Green metal matrix composites: a multi-faceted study on Al alloy composites with egg shell powder and silicon carbide as reinforcements." Metallurgical Research & Technology 121, no. 6 (2024): 610. http://dx.doi.org/10.1051/metal/2024086.

Full text
Abstract:
This article is about Green Metal Matrix Composites (GMMCs) produced with aluminum alloys and reinforcements include silicon carbide and eggshell powder. The GMMCs offer a new approach to sustainable materials through the use of ecofriendly reinforcements. A novel class of composites results from a combination of silicon carbide, which has superior mechanical properties, and agricultural waste based eggshell powder. Furthermore, eggshell powder mainly comprised of calcium carbonate lowers its density as well as serves as long-term reinforcement. Silicon carbide enhances their mechanical proper
APA, Harvard, Vancouver, ISO, and other styles
7

Li, Jiwen, Douqin Ma, Jingpei Xie, Fang Fang, Liujie Xu, and Shizhong Wei. "A novel high density W-30Cu alloy prepared via hydrothermal synthesis-co-reduction and canned hot extrusion methods." Metallurgical Research & Technology 116, no. 1 (2018): 113. http://dx.doi.org/10.1051/metal/2018034.

Full text
Abstract:
We report herein the successful synthesis of in situ nanocomposite W-30Cu as powder via the hydrothermal approach combined with the co-reduction process, having sodium tungstate and copper nitrate as starting materials. The cold isostatic pressing, vacuum sintering and canned hot extrusion technology have been employed in order to improve the properties of the W-30Cu alloy. The impact of preparation’s methodologies on the microstructure, mechanical and physical properties have been investigated by the means of X-ray diffractometry (XRD); scanning electron (SEM); field emission electron (FE-SEM
APA, Harvard, Vancouver, ISO, and other styles
8

Chen, Wei Ping, Dong Hui Yang, Jun Lu, et al. "Fabrication of Zn Alloy Foam via Powder Metallurgical Approach." Materials Science Forum 849 (March 2016): 819–24. http://dx.doi.org/10.4028/www.scientific.net/msf.849.819.

Full text
Abstract:
Powder metallurgical (PM) route is one of the methods for metal foam fabrication. In this paper, we report the fabrication of Zn alloy foams with 0~50wt.% Mg via powder metallurgical approach by using CaCO3 as the blowing agent. The fabrication process included 5 steps: powders mixing, cool-pressing, heat treatment, hot-pressing, foaming and cooling. The effects of Mg addition, foaming temperature on the foaming process were discussed. Finally, the compressive behavior of Zn alloy foam was evaluated.
APA, Harvard, Vancouver, ISO, and other styles
9

Escano, Luis I., Niranjan D. Parab, Qilin Guo, et al. "An instrument for in situ characterization of powder spreading dynamics in powder-bed-based additive manufacturing processes." Review of Scientific Instruments 93, no. 4 (2022): 043707. http://dx.doi.org/10.1063/5.0076235.

Full text
Abstract:
In powder-bed-based metal additive manufacturing (AM), the visualization and analysis of the powder spreading process are critical for understanding the powder spreading dynamics and mechanisms. Unfortunately, the high spreading speeds, the small size of the powder, and the opacity of the materials present a great challenge for directly observing the powder spreading behavior. Here, we report a compact and flexible powder spreading system for in situ characterization of the dynamics of the powders during the spreading process by high-speed x-ray imaging. The system enables the tracing of indiv
APA, Harvard, Vancouver, ISO, and other styles
10

Chicinaş, Horea Florin, Darius Ovidiu Jucan, Glad Contiu, and Cătălin Popa. "Effect of Aqueous Milling on the Total Carbon Content of Hard Metal Powders." Advanced Engineering Forum 42 (September 7, 2021): 3–8. http://dx.doi.org/10.4028/www.scientific.net/aef.42.3.

Full text
Abstract:
Materials consisting of a hard phase, usually WC, and a tough binder, traditionally Co, form the most successful class of composite materials, also known as Hard Metals (HM) or Cemented Carbides. Powder metallurgy routes are employed generally for the production of such [1]. The typical processing route of such materials involves mixing the components, kneading and consolidation. Alcohols, alkanes and alkenes are commonly used to limit any excessive heating and oxidation of powders during mixing the components. In this study, we report the results of milling in a more environmentally friendly
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Metal Powder Report"

1

Lanier, Madison Kathryn. "Much Ado About Immersion: Power, Reported Results, and the Validity of Research on the Psychology of Virtual Reality and Immersive Simulations." Thesis, Virginia Tech, 2018. http://hdl.handle.net/10919/83778.

Full text
Abstract:
Virtual reality (VR) technology has permeated consumer culture in recent years, consequentially inspiring a hotbed of interdisciplinary academic VR research to better understand its effects as a medium. It has become a popular subject of study in fields as varied as engineering, computer science, communication, and psychology. The present study evaluates methodological trends in behavioral research on VR in terms of best practices regarding data collection, reporting, and availability. A meta-scientific content analysis of 61 articles focused on power, p-values, reporting errors, and transpare
APA, Harvard, Vancouver, ISO, and other styles
2

Reinfried, Matthias. "Herstellung und Eigenschaften neuartiger, metallischer Polyederzellstrukturen." Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2010. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-62031.

Full text
Abstract:
Das Ziel der vorliegenden Arbeit ist es, die technologischen Schritte für die Herstellung eines geschlossenzelligen metallischen Werkstoffs aus Stahl zu untersuchen. Das Eigenschaftsbild dieses neuartigen zellular aufgebauten Werkstoffs soll umfassend beschrieben und mit bereits existierenden Werkstoffkonzepten verglichen werden. Die Grundidee für die Herstellung einer geschlossenzelligen Struktur bildet die Kombination der Technologie zur Herstellung von metallischen Hohlkugeln und Hohlkugelstrukturen mit dem Herstellungsprozesses für Partikelschäume aus expandierbarem Polystyrol (EPS). Dazu
APA, Harvard, Vancouver, ISO, and other styles
3

Flieger, Matthias Ludwig. "Entwicklung, Modellierung und Verifikation einer Dual-Feed-Antennenstruktur für leistungsfähige, passive UHF-RFID-Sensoren auf kritischen Oberflächen." Doctoral thesis, Universitätsbibliothek Chemnitz, 2013. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-120227.

Full text
Abstract:
Die Weiterentwicklung klassischer, elektronischer Identifikationstechnologien leistet einen wichtigen Beitrag zum technischen Fortschritt in Industrie, Logistik und Gesundheitswesen. Die vorliegende Dissertationsschrift beschreibt die Entwicklung eines Dual-Feed-Antennendesigns für passive UHF-RFID-Transponder auf kritischen Oberflächen. Die zu Grunde liegende Antennenstruktur besteht aus einem Microstrip-Patch unter Verwendung eines verlustarmen Substratmaterials. Dieser erfährt eine Optimierung hinsichtlich seiner Lesereichweite, insbesondere auf kritischen Oberflächen. Ein Zwei-Port-Konzept
APA, Harvard, Vancouver, ISO, and other styles
4

Baumann, Andreas. "Pulverspritzgießen von Metall-Keramik-Verbunden." Doctoral thesis, 2010. https://tubaf.qucosa.de/id/qucosa%3A22747.

Full text
Abstract:
Die in der vorliegenden Arbeit untersuchten Metall-Keramik-Verbunde wurden mittels Pulverspritzgießen hergestellt. Unter Anwendung der teilautomatisierten Verfahrensoptionen Mehrkomponentenspritzgießen und Inmould-Labelling, welches u. a. die Verwendung tiefgezogener Grünfolien beinhaltete, wurden hierzu 2K-Prüfkörpergeometrien (Zugstab, Biegebruchstab, Ringverbund) und 2K-Demonstratoren (Innenzahnrad, Fadenführer, Greifer) jeweils bestehend aus Stahl 17-4PH und ZrO2 (3%Y2O3), im Co-Sinterverfahren unter H2-Atmosphäre bei 1350°C, entwickelt. Schlüssel zur Darstellung schwindungskonformer ZrO2-
APA, Harvard, Vancouver, ISO, and other styles
5

Franke, Peter. "Herstellung und Charakterisierung von Keramik-Matrix-Verbundwerkstoffen mit Metallpartikel- oder Metallfaserverstärkung." Doctoral thesis, 2016. https://tud.qucosa.de/id/qucosa%3A30787.

Full text
Abstract:
Die exzellenten Eigenschaften einer Keramik beziehen sich auf den hohen Schmelzpunkt, die gute Hochtemperaturfestigkeit sowie hohe Elastizitätsmodul- und Härtewerte. Weiterhin zeichnen sich die anorganisch-nichtmetallischen Werkstoffebesonders durch ihre gute Korrosions- und Verschleißbeständigkeit aus.Bedingt durch die erschwerte Versetzungsbewegung weisen keramische Werkstoffeeine höhere Sprödigkeit auf. Metallische Werkstoffedagegen sind in der Regel duktil und zeigen meist ein duktiles Bruchverhalten. Lokale Spannungsspitzen können durch plastische Verformung abgebaut werden.Das Ziel diese
APA, Harvard, Vancouver, ISO, and other styles
6

Auer, Henry. "In Situ and Ex Situ Hydrogenation Studies of Zintl Phases Containing Tetrelides or Gallium." 2018. https://ul.qucosa.de/id/qucosa%3A31835.

Full text
Abstract:
Die Hydrierung von Zintl-Phasen führt zur Bildung von Einlagerungshydriden, die ausschließlich von Kationen koordiniert sind, zu polyanionischen Hydriden, bei denen Wasserstoff kovalent an das stärker elektronegative Element bindet, oder zu einer Kombination von beiden Motiven. Es wurde eine Reihe neuer Verbindungen dargestellt und mittels Laborröntgen-, Synchrotron- und Neutronenpulverbeugung strukturell charakterisiert. Die meisten Beispiele werden durch die Hydrierung von Zintl-Phasen im CrB- oder FeB-Strukturtyp erhalten. Die beiden Typen sind strukturell eng verwandt. Sie sind durch das A
APA, Harvard, Vancouver, ISO, and other styles
7

Beggiato, Matthias. "Changes in motivational and higher level cognitive processes when interacting with in-vehicle automation." Doctoral thesis, 2014. https://monarch.qucosa.de/id/qucosa%3A20246.

Full text
Abstract:
Many functions that at one time could only be performed by humans can nowadays be carried out by machines. Automation impacts many areas of life including work, home, communication and mobility. In the driving context, in-vehicle automation is considered to provide solutions for environmental, economic, safety and societal challenges. However, automation changes the driving task and the human-machine interaction. Thus, the expected benefit of in-vehicle automation can be undermined by changes in drivers’ behaviour, i.e. behavioural adaptation. This PhD project focuses on motivational as well a
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Metal Powder Report"

1

International, Conference on Isostatic Pressing (3rd 1986 London England). Proceedings of 3rd International Conference on Isostatic Pressing: A Metal Powder Report conference, London, November 10-12, 1986. MPR Pub. Services, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

International Conference on PM Aerospace Materials (1987 Lucerne, Switzerland). PM aerospace materials: Proceedings of International Conference on PM Aerospace Materials, a Metal Powder report conference, Luzern, November 2 - 4, 1987. MPR Pub., 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

International Conference on Isostatic Pressing (3rd 1986 London). ISO 3: Proceedings of 3rd International Conference on Isostatic Pressing : a Metal Powder Report conference, London, November 10-12, 1986. MPR Publishing Services, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Commission, Newfoundland Law Reform. Report on enduring powers of attorney. The Commission, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

German, Randall M. The powder injection molding industry: An industry and market report. Innovative Material Solutions, Inc., 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

U.S. Nuclear Regulatory Commission. Office of Nuclear Reactor Regulation, ed. Preapplication safety evaluation report for the power reactor innovative small module (PRISM) liquid-metal reactor: Final report. Office of Nuclear Reactor Regulation, U.S. Nuclear Regulatory Commission, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Commission, Queensland Law Reform. A review of Queensland's guardianship laws: Report. Law Reform Commission, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Commission, South African Law. Enduring powers of attorney and the appointment of curators to mentally incapacitated persons: Report. The Commission, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Weil, Andrew. Spontaneous healing: How to discover and enhance your body's natural ability to maintain and heal itself. Beeler Large Print, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Weil, Andrew. Spontaneous healing: How to discover and enhance your body's natural ability to maintain and heal itself. Knopf, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Metal Powder Report"

1

Parroco, Anna Maria, and Micaela Arcaio. "Assessing intimate partner violence in African countries through a model-based composite indicator." In Proceedings e report. Firenze University Press and Genova University Press, 2023. http://dx.doi.org/10.36253/979-12-215-0106-3.35.

Full text
Abstract:
Violence against women has been recognised to affect all dimensions of women’s lives and health, involving both the physical and mental conditions of victims and their general well-being. Intimate partner violence (IPV) – characterized by one of the partners seeking power and control over the other – can be identified as either emotional, physical, or sexual abuse. Recent data show that 33% of ever-married women in Sub-Saharan Africa have survived this form of abuse. The literature lacks an overall measure of violence suitable for surveys since the Composite Abuse Scale (Revised) – Short Form
APA, Harvard, Vancouver, ISO, and other styles
2

Adachi, Hiroki. "Synchrotron X-ray Study on Plaston in Metals." In The Plaston Concept. Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-16-7715-1_9.

Full text
Abstract:
AbstractGrain refinement is one of the methods applied to strengthen metallic materials, and various peculiar mechanical properties have been reported to be expressed when the grain size is reduced to less than submicron dimensions. This is considered to be due to a change in the behavior of dislocations that are associated with plastic deformation. In situ synchrotron radiation measurements of microstructural changes during deformation in face-centered cubic (fcc) metals with grain sizes of 20 μm to 5 nm were performed to systematically investigate the effects of grain size on dislocation beh
APA, Harvard, Vancouver, ISO, and other styles
3

Campbell, Alice, and Francisco Perales. "Intergenerational Processes of Disadvantage in the Lives of Lesbian, Gay and Bisexual Australians: From Relationships with Parents to Parenting Expectations." In Family Dynamics over the Life Course. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-12224-8_12.

Full text
Abstract:
AbstractAustralia remains a heteronormative society, with many of our social, legal, and moral structures still assuming and reinforcing heterosexuality as the default norm. The impacts of heteronormativity on the family lives of lesbian, gay and bisexual (LGB) Australians can be profound. In this chapter, we draw from the lifecourse principles of linked lives, trajectories and turning points to examine how family dynamics produce disadvantage in the lives of LGB Australians. We begin by documenting trajectories of satisfaction, closeness, and support in relationships between LGB children and
APA, Harvard, Vancouver, ISO, and other styles
4

Winkle, Thomas. "Introduction." In Product Development within Artificial Intelligence, Ethics and Legal Risk. Springer Fachmedien Wiesbaden, 2022. http://dx.doi.org/10.1007/978-3-658-34293-7_1.

Full text
Abstract:
AbstractWith regard to safe product development in the dilemma between Artificial Intelligence, ethics and legal risk, Prof. Dr.-Ing. MBA Thomas Winkle first provides a meta-analysis on safety assessment based on accident data examples to show possible definitions of safety benefits and risk. With more than 20 years of research and consulting at three automobile manufacturers, Thomas Winkle also points to disasters from nuclear power plant accidents at Chernobyl and Fukushima. Further comparisons between global mortality rates of women and men to life expectancy of different countries of the w
APA, Harvard, Vancouver, ISO, and other styles
5

Kelso, Gwendolyn A., and Leslie R. Brody. "Implicit Processes and Emotions in Stereotype Threat about Women's Leadership." In Advances in Psychology, Mental Health, and Behavioral Studies. IGI Global, 2015. http://dx.doi.org/10.4018/978-1-4666-6599-6.ch006.

Full text
Abstract:
Stereotype threat about leadership ability may trigger emotional and cognitive responses that reduce women's leadership aspirations. This chapter reviews literature and presents a study on the effects of implicit (covert) and explicit (overt) leadership stereotype threat on women's emotions, power-related cognitions, and behaviors as moderated by exposure to powerful female or male role models. Emotional responses were measured using self-report (direct) and narrative writing (indirect) tasks. Undergraduate women (n = 126) in the Northeastern U.S. were randomly divided into three stereotype th
APA, Harvard, Vancouver, ISO, and other styles
6

Dalton, Bartholomew, and Caroline Liggins. "Mental Health Disposals." In Blackstone's Magistrates' Court Handbook 2024. Oxford University PressOxford, 2024. http://dx.doi.org/10.1093/oso/9780198906605.003.0078.

Full text
Abstract:
Abstract This chapter explores the provision of mental health disposals. The Sentencing Council has issued a guideline on sentencing offenders with mental disorders, developmental disorders, or neurological impairments. The fact that an offender has an impairment or disorder should always be considered by the court but will not necessarily have an impact on sentencing. Culpability may be reduced if an offender was at the time of the offence suffering from an impairment or disorder. The chapter then looks at the provision on guardianship and hospital orders under section 37 of the Mental Health
APA, Harvard, Vancouver, ISO, and other styles
7

Higashi, Yuya, Rin Tsuchiya, Diasuke Nakane, and Takashiro Akitsu. "Crystal Structure Prediction for Powder XRD of Polymorph toward Intractable Metal Complexes." In Novelties in Schiff Bases [Working Title]. IntechOpen, 2024. http://dx.doi.org/10.5772/intechopen.114365.

Full text
Abstract:
Originating from the challenges of using ordinary methods for determining the structure of salen-type nickel(II) complexes and the limitations of crystallography of unknown organic powders, which has not been reported for many years, this chapter mainly reviews crystal structure prediction, polymorphism, phase transitions, and the application of computational methods. It also states that new research is incorporating computational chemistry for analyzing powder XRD. In particular, we will explore the possibility of predicting polymorphic crystal structures, which are of academic and industrial
APA, Harvard, Vancouver, ISO, and other styles
8

Kumar Sahoo, Prasanta, Chi-Ang Tseng, Yi-June Huang, and Chuan-Pei Lee. "Carbon-Based Nanocomposite Materials for High-Performance Supercapacitors." In Novel Nanomaterials. IntechOpen, 2021. http://dx.doi.org/10.5772/intechopen.95460.

Full text
Abstract:
Lightweight, flexible, wearable, and portable electronic gadgets have drawn significant attention in modern electronics industry. To power these gadgets, great efforts have been made to develop highly efficient energy-storage equipment. Among various power sources, a supercapacitor, acting as a bridge between the conventional battery and electrolytic capacitor, has been considered a promising portable energy storage device because of its high power density, fast charge/discharge rate, adequate operational safety, and excellent working lifetime. Hybrid supercapacitors, which combine redox mater
APA, Harvard, Vancouver, ISO, and other styles
9

Prajapati, Akanksha, Dipayan Chakraborty, Nisar Ahamad Khan, Bhukya Praveen, and Ajay Kumar. "State of the Art in Additive Manufacturing of Metal Matrix Composite for Use in Performance-Specific Application." In Advanced Materials for Emerging Applications (Innovations, Improvements, Inclusion and Impact). BENTHAM SCIENCE PUBLISHERS, 2024. http://dx.doi.org/10.2174/9789815196771124010009.

Full text
Abstract:
Metal matrix composites (MMCs) have proved themselves a reliable alternative to different metals and their alloys due to their high strength-to-weight ratio, high durability; high wear corrosion resistance, high hardness and other mechanical properties. In the conventional approach, different methods like liquid-state processing (stir casting, squeeze casting etc.), solid-state processing (consolidation, physical vapour deposition or PVD, powder bending etc.), and in-situ processing are being used to manufacture metal matrix composites (MMCs). Injection molding and other in-situ processing are
APA, Harvard, Vancouver, ISO, and other styles
10

Ralph, Alan. "Adolescents and Young Adults with Psychosocial Difficulties." In The Power of Positive Parenting, edited by Matthew R. Sanders and Trevor G. Mazzucchelli. Oxford University Press, 2017. http://dx.doi.org/10.1093/med-psych/9780190629069.003.0013.

Full text
Abstract:
Significant numbers of teenagers globally are reported to have health and mental health problems. Parenting factors have been shown to be related to adolescent health and mental health problems as well as other social determinants. Teen Triple P is described as an example of an intervention developed as an upward extension of the Triple P—Positive Parenting Program for parents of children from 12 to 16 years of age. Challenges that need to be addressed to increase parental access to trained practitioners are discussed, including the tendency among workers in the adolescent mental health field
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Metal Powder Report"

1

Ajit, Akshay, Crispin Mathew, David Johns Denny, Devananth H, and Dhanya P M. "Mental State Report From Social Media Activity." In 2024 International Conference on Signal Processing, Computation, Electronics, Power and Telecommunication (IConSCEPT). IEEE, 2024. http://dx.doi.org/10.1109/iconscept61884.2024.10627786.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Powell, Daniel, Larry Stapley, Jason Hughes, and Elliot Brown. "Controlling the Formation of a Non-Sulfur Based Black Powder within a New Natural Gas Processing Plant’s Waste Heat Recovery Unit and Minimizing Any Threats of a Possible Metal Dusting Corrosion Mechanism within Process Tubing." In CORROSION 2012. NACE International, 2012. https://doi.org/10.5006/c2012-01438.

Full text
Abstract:
Abstract “Black powder” is commonly used to describe iron sulfide or iron oxide compounds, which may form within natural gas pipelines. Extensive “black powder” problems were reported following the startup of a new gas processing facility in 2009. Specifically, an extensive dark to black powdery dust or flakes were found clogging the waste heat recovery unit (WHRU) heat exchangers and the downstream filters and piping. The “black powder” was not observed in the inlet filters to the plants or the amine systems, but was observed within the mole sieve dehydrators (Presumably, the powder was trans
APA, Harvard, Vancouver, ISO, and other styles
3

Wood, Pete. "An Examination of the Realities of the Power Plant Buried Piping Environment via Measured Potentials." In CORROSION 2014. NACE International, 2014. https://doi.org/10.5006/c2014-4344.

Full text
Abstract:
Abstract Power plants contain a complex network of buried piping composed of various materials, primarily metals, all electrically connected via a copper grounding grid. While the effects of mixed metal couples are a topic of discussion, little has been done to examine and document their measured impact in an installed plant environment. This paper will present an analysis of an extensive amount of native (static) copper/copper sulfate reference cell (CSE) potential data obtained from buried structure surveys at nineteen (19) nuclear plants, most with existing cathodic protection (CP) systems
APA, Harvard, Vancouver, ISO, and other styles
4

Krissa, Len J., Christophe Baeté, and Jerry DeWitt. "CP Management of Multiple Pipeline Right-of-Ways." In CORROSION 2015. NACE International, 2015. https://doi.org/10.5006/c2015-05795.

Full text
Abstract:
Abstract The report discusses cathodic protection (CP) experiences on the world’s longest, most complex crude oil and liquid hydrocarbon transportation system; having 24,738 kilometers (15,372 miles) of pipeline throughout North America. Since initial construction of the first pipeline in 1949, infrastructure has continually been enhanced and improved to meet the needs of the Company’s shippers. The expansion has resulted in areas of the mainline corridor where up to seven (7) parallel pipelines are contained within the same right-of-way (ROW). The evolution of construction materials over the
APA, Harvard, Vancouver, ISO, and other styles
5

Crum, James R., Samuel D. Kiser, Dr Rengang Zhang, and Stephen M. Gosnay. "Corrosion Acceptance Testing of Weld Metals for Nuclear Service." In CORROSION 2011. NACE International, 2011. https://doi.org/10.5006/c2011-11200.

Full text
Abstract:
Abstract Intergranular corrosion tests such as ASTM G28, Practices A and E and RCC-M MC1300 are often used to verify the resistance of nickel alloys to intergranular corrosion. The inherent differences in wrought products and weld metals can cause differences in test results for these two materials. A weld metal cast structure, which is less homogenous than wrought metals, is often measured against commonly used wrought metal acceptance criteria. These tests are difficult for welding products to pass regardless of weld quality. Intergranular corrosion test results are reported for Ni-Cr-Fe wel
APA, Harvard, Vancouver, ISO, and other styles
6

Kiser, Samuel, Rengang Zhang, and Martin Caruso. "Nuclear Welding Product 52MSS Delivers Improved Tensile Strength and Maximum Resistance to PWSCC and DDC." In CORROSION 2013. NACE International, 2013. https://doi.org/10.5006/c2013-02652.

Full text
Abstract:
Abstract Filler Metal 52MSS (ERNiCrFe-13) has been thoroughly evaluated for resistance to Primary Water Stress Corrosion Cracking (PWSCC), Ductility Dip Cracking (DDC) by the Strain-to-Fracture Test, and hot cracking by the transvarestraint and longitudinal varestraint tests. In addition, metallurgical stability after exposure to temperatures above nuclear operating temperatures has been evaluated by x-ray diffraction (XRD) by The Ohio State University (OSU) and Knolls Atomic Power Laboratory (KAPL). Additionally, mechanical properties have been predicted by JMatPro and compared to values meas
APA, Harvard, Vancouver, ISO, and other styles
7

Heuser, H., C. Jochum, W. Bendick, B. Hahn, and R. Fuchs. "Welding of Dissimilar Joints of New Power Plant Steels." In AM-EPRI 2007, edited by R. Viswanathan, D. Gandy, and K. Coleman. ASM International, 2007. https://doi.org/10.31399/asm.cp.am-epri-2007p0863.

Full text
Abstract:
Abstract In conventionally fired power plants, appropriate materials are required which correspond to the different temperature and oxidizing conditions in the boiler and in the superheater sections. Pipe steels with 2 1/4 Cr (P22; T23; T24) must be welded to 9 - 12 % Cr steels (P91; E911; P92; VM12). In this area, the choice of the appropriate welding filler material is vital for the quality of the weldment. This report highlights the possibilities for achieving optimal properties in differing dissimilar metal welds under conditions of reduced carbon diffusion.
APA, Harvard, Vancouver, ISO, and other styles
8

Ferrer, F., J. Goudiakas, E. Andres, and C. Brun. "Acoustic Emission Study of Dimethyl Disulfur as Metal Dusting Inhibitor." In CORROSION 2001. NACE International, 2001. https://doi.org/10.5006/c2001-01386.

Full text
Abstract:
Abstract Metal dusting of low alloyed steels or Fe-Ni-Cr alloys has been reported in industrial environment working with strongly carburizing atmospheres at temperature from 450°C to 800°C. During this catastrophic form of carburization, the affected metal disintegrates into a mixture of powdery carbon and metal particles. In the present study, the corrosion behavior of alloy UNS N08810 (alloy 800H) tubes was investigated in H2 - 85% CO gas mixture at 650°C. The metal dusting is preceded by internal carburization whereby the chromium is tied up. Afterwards the remaining Fe-Ni matrix can react
APA, Harvard, Vancouver, ISO, and other styles
9

Kiser, Samuel D., Evan B. Hinshaw, and Tino Orsini. "Extending the Life of Fossil Fired Boiler Tubing with Cladding of Nickel Based Alloy Materials." In CORROSION 2006. NACE International, 2006. https://doi.org/10.5006/c2006-06474.

Full text
Abstract:
Abstract Fossil fuel fired boilers and circulating fluidized bed boiler tubing in the power industry are normally protected against corrosion using nickel based clad coatings. Weld overlay is the most common form of cladding that utilizes the pulsed gas metal arc welding process, however thermal spray processes using cored wires, powder, and solid wire nickel based consumables have been used as well. Good bond integrity, heat transfer, corrosion resistance, and cladding density are the essential cladding characteristics that provide optimum life of water wall tubes in the transition areas, air
APA, Harvard, Vancouver, ISO, and other styles
10

BARTH, Eric. "Laser metal deposition of NbTaTiV refractory high entropy alloy." In Material Forming. Materials Research Forum LLC, 2024. http://dx.doi.org/10.21741/9781644903131-29.

Full text
Abstract:
Abstract. A mixture of Ti, V, Nb and Ta elemental powders was used to print an equimolar Refractory High Entropy Alloy NbTaTiV. Single beads and wall structures were printed on Ti-6Al-4V substrates. The samples were then cut to analyze their cross-section and composition. The samples present a large proportion of non-melted Ta particles, due to the low max power of the used laser (500W) and of the high melting-point of Ta. It was found that using a two-step deposition process (deposition, followed by a powder-less re-melting pass) could allow to homogenize the samples and melt said Ta particle
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Metal Powder Report"

1

Scime, Luke, William Halsey, James Haley, et al. Development of Monitoring Techniques for Laser Powder Bed Additive Manufacturing of Metal Structures (Progress Report). Office of Scientific and Technical Information (OSTI), 2020. http://dx.doi.org/10.2172/1675044.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

King, Wayne. Process Control for Defect Mitigation in Laser Powder Bed Fusion Additive Manufacturing. SAE International, 2023. http://dx.doi.org/10.4271/epr2023011.

Full text
Abstract:
<div class="section abstract"><div class="htmlview paragraph">Success in metal additive manufacturing (AM) relies on the optimization of a large set of process parameters to achieve materials whose properties and performance meet design and safety requirements. Despite continuous improvements in the process over the years, the quality of AM parts remains a major concern for manufacturers. Today, researchers are starting to move from discrete geometry-dependent build parameters to continuously variable or dynamically changing parameters that are geometry- and scan-path aware. This a
APA, Harvard, Vancouver, ISO, and other styles
3

Herbold, Eric, and Ajey Joshi. Simulating Properties of Metal Powder Beds Used for Additive Manufacturing of Parts in Semiconductor, Solar and Display Equipment, CRADA Final Report No. TC02261. Office of Scientific and Technical Information (OSTI), 2019. http://dx.doi.org/10.2172/1631830.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

King, Wayne, and Ade Makinde. Minimization of Spatter During Direct Metal Laser Powder Bed Fusion (LPBF) Additive Manufacturing Process Using ALE3D Coupled with Experiments, (CRADA TC02254 Final Report). Office of Scientific and Technical Information (OSTI), 2019. http://dx.doi.org/10.2172/1650023.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Peck, H., and I. Gomez. Simulating Properties of Metal Powder Beds Used for Additive Manufacturing of Parts in Semiconductor, Solar and Display Equipment Final Report CRADA No. TC02261 Date Technical Work Ended: 7/31/19. Office of Scientific and Technical Information (OSTI), 2021. http://dx.doi.org/10.2172/1771433.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Pasupuleti, Murali Krishna. Neuromorphic Nanotech: 2D Materials for Energy-Efficient Edge Computing. National Education Services, 2025. https://doi.org/10.62311/nesx/rr325.

Full text
Abstract:
Abstract The demand for energy-efficient, real-time computing is driving the evolution of neuromorphic computing and edge AI systems. Traditional silicon-based processors struggle with power inefficiencies, memory bottlenecks, and scalability limitations, making them unsuitable for next-generation low-power AI applications. This research report explores how 2D materials, such as graphene, transition metal dichalcogenides (TMDs), black phosphorus, and MXenes, are enabling the development of neuromorphic architectures that mimic biological neural networks for high-speed, ultra-low-power computat
APA, Harvard, Vancouver, ISO, and other styles
7

Pham, Anh Vu. Final Progress Report: Through-Metal Communications and Power Transfer System. Office of Scientific and Technical Information (OSTI), 2018. http://dx.doi.org/10.2172/1459153.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Branover, H., Y. Unger, A. El-Boher, and H. Schweitzer. Development of a wet vapor homogeneous liquid metal MHD power system. Final report. Office of Scientific and Technical Information (OSTI), 1991. http://dx.doi.org/10.2172/10150340.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Donoghue, J. E., J. N. Donohew, G. R. Golub, et al. Preapplication safety evaluation report for the Power Reactor Innovative Small Module (PRISM) liquid-metal reactor. Final report. Office of Scientific and Technical Information (OSTI), 1994. http://dx.doi.org/10.2172/10133164.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Ryland, Howard, and Sarah Bunn. Reforming the Mental Health Act - Approaches to Improve Patient Choice. Parliamentary Office of Science and Technology, UK Parliament, 2023. http://dx.doi.org/10.58248/pn695.

Full text
Abstract:
The Mental Health Act 1983 has been criticised as being overly restrictive, with inadequate scope for patient choice and autonomy. The Government’s Draft Mental Health Bill proposes reforms to improve patient choice. A joint parliamentary committee report on the draft Bill recommended further changes to enhance choice, including a statutory duty to offer patients advance choice documents. Reports to date suggest that advance care planning could offer some benefits, but uptake can be low. Proposals to replace the Nearest Relative who has certain powers under the Act, with a Nominated Person of
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Metal Powder Report' for particular source types:
Journal articles Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography