Relevant bibliographies by topics / Metal wire

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Metal wire'

Author: Grafiati
Published: 28 May 2022
Last updated: 30 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Metal wire.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Metal wire"

1

Zhao, Haitao, Shuize Wang, Junheng Gao, et al. "Cause analysis of V-shaped crack pairs on drawn welding wire surface of ER70S-6 steel." Metallurgical Research & Technology 119, no. 5 (2022): 510. http://dx.doi.org/10.1051/metal/2022070.

Full text
Abstract:
Welding wires are widely used as electrodes in various welding processes. To produce welding wires, wire rods are drawn gradually to final diameters at welding wire manufacturers. During the wire drawing process, premature failure happens frequently due to various reasons, and a type of wire drawing failure originated from wire surface V-shaped cracks or so-called chevron-like cracks is often found. In this research, V-shaped cracks on drawn welding wire surfaces of ER70S-6 steel were characterised carefully and its underlying mechanism was discussed thoroughly. It was found that the V-shaped
APA, Harvard, Vancouver, ISO, and other styles
2

Golyakevich, Andrey A., Leonid N. Orlov, and Sergey Yu Maksimov. "Mechanized Welding with Metal Cored Wire." Advanced Materials Research 1157 (February 2020): 113–22. http://dx.doi.org/10.4028/www.scientific.net/amr.1157.113.

Full text
Abstract:
Currently, there is a steady upward trend in the consumption of flux-cored wires in the global market of welding consumables. One of the rapidly developing technologies for the manufacture of metal structures is shielded gas arc welding with flux-cored wire with a metal core. According to the technology of use, metal cored wires do not differ from solid wires, and even surpass them in some technological characteristics. Taking into account global trends in the development of mechanized welding and the lack of domestic analogues, LLC TM.VELTEK has developed and mastered the manufacturing of hig
APA, Harvard, Vancouver, ISO, and other styles
3

Hamid, Rahimah Abdul, and Teruaki Ito. "Verification of Sheet Metal based Wire Bending Procedures." Proceedings of Design & Systems Conference 2016.26 (2016): 1403. http://dx.doi.org/10.1299/jsmedsd.2016.26.1403.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Prabhakaran, B., P. Sivaraj, S. Malarvizhi, V. Balasubramanian, and S. Sathiya. "Metal Cored Wire on Mechanical Properties and Microstructural Characteristics of Wire Arc Direct Energy Deposited Component." Indian Journal Of Science And Technology 17, no. 44 (2024): 4655–62. https://doi.org/10.17485/ijst/v17i44.3514.

Full text
Abstract:
Objectives: Fabrication of a cylinder-shaped High-Strength Low Alloyed steel wall component through wire (metal cored) arc additive manufacturing and assess the homogeneity and integrity of the built component. Method: Mechanical testing and microstructural characterizations such as optical microscopy, scanning electron microscopy and electron backscattered diffraction techniques were performed at distinct regions (namely, bottom and top). Findings: The conducted tensile test at the bottom area recorded a tensile strength of 864 MPa, which is 5.9 % higher than the top region but with a lower t
APA, Harvard, Vancouver, ISO, and other styles
5

Godon, Julie, Pascal Antoine, Jean Bernard Vogt, and Jérémie Bouquerel. "Influence of steel cleanliness on drawability of fine filaments with high tensile strength." Metallurgical Research & Technology 116, no. 5 (2019): 513. http://dx.doi.org/10.1051/metal/2019025.

Full text
Abstract:
The aim of the current study is to clarify the influence of steel cleanliness on the fracture during wet wire drawing of high strength high carbon very fine filaments. Methodologies for inclusion identification and for inclusion count were developed. Ninety percent of the fractured filaments were associated with an inclusion which was SiO2, or SiO2-CaO or SiO2-MgO. The fracture of the wires resulted from debonding of the inclusion from the matrix. Inclusion density assessed from total oxygen content in the wire was successfully and reliably obtained. Inclusions exhibited a wide range of sizes
APA, Harvard, Vancouver, ISO, and other styles
6

Yuan, Chengwei, Shujun Chen, Fan Jiang, Bin Xu, and Shanwen Dong. "Mechanism of Continuous Melting and Secondary Contact Melting in Resistance Heating Metal Wire Additive Manufacturing." Materials 13, no. 5 (2020): 1069. http://dx.doi.org/10.3390/ma13051069.

Full text
Abstract:
Resistance heating metal wire materials additive manufacturing technology is of great significance for space environment maintenance and manufacturing. However, the continuous deposition process has a problem in which the metal melt is disconnected from the base metal. In order to study the difference between the second contact melting of the disconnected metal melt and the continuous melting of the metal wire as well as eliminate the problem of the uneven heat dissipation of the base metal deposition on the melting process of the metal wire, the physical test of melting the metal wire clamped
APA, Harvard, Vancouver, ISO, and other styles
7

Ito, Arata, Hideki Kitaura, Haruki Sugisawa, Takahiro Noguchi, Fumitoshi Ohori, and Itaru Mizoguchi. "Titanium Nitride Plating Reduces Nickel Ion Release from Orthodontic Wire." Applied Sciences 11, no. 20 (2021): 9745. http://dx.doi.org/10.3390/app11209745.

Full text
Abstract:
The leaching of metal ions from orthodontic appliances is a problem for their use in patients with metal allergies. Despite the development of a number of non-metal orthodontic appliances, including brackets, non-metal wires are not yet available. Therefore, it is necessary to modify the surfaces of orthodontic wires to prevent the leaching of metal ions into the oral environment for use in such patients. This study was performed to examine whether plating of orthodontic wire with titanium nitride (TiN), which does not impair its mechanical properties, could prevent the leaching of metal ions
APA, Harvard, Vancouver, ISO, and other styles
8

Lestani, M. "Technological improvements in wire rod mills." Revue de Métallurgie 93, no. 7-8 (1996): 955–66. http://dx.doi.org/10.1051/metal/199693070955.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Muhammad Yunus and Nanda Pranandita. "Rancang Bangun Alat Pembengkok Kawat Metal Jig." Jurnal Mesin Nusantara 4, no. 1 (2021): 11–20. http://dx.doi.org/10.29407/jmn.v4i1.16017.

Full text
Abstract:
An UMKM (micro, small and medium scale business) in the city of Pangkalpinang, Province of Kep. Bangka Belitung, with the trademark "kebajig Lure", produces metal jigs or artificial/fake bait made of metal. One of the problems in the process of making metal jigs at UMKM is bending the wire on the metal jig, because the bending process uses loop pliers which causes the wire to be made to be non-uniform (where 10 wires, below 50% of the wire deviates from tolerance) so that the stray wire must be repaired first before the metal jig molding process. In addition, the bending time of 1 piece of wir
APA, Harvard, Vancouver, ISO, and other styles
10

Chen, Changyong, Meng Sun, Xiaoqing Chen, Yi Wang, Zhouhua Jiang, and Jianan Zhou. "Recent advances of silicon wafer cutting technology for photovoltaic industry." Metallurgical Research & Technology 118, no. 6 (2021): 616. http://dx.doi.org/10.1051/metal/2021091.

Full text
Abstract:
Using ultra-fine wire saw to cut solar grade silicon wafer is a very precise technology. In the past 20 years, researchers have done a lot of research and made great progress. The cutting method of silicon rod has developed from single line cutting to multi line simultaneous cutting, which greatly improves the production efficiency and the yield of silicon rod. However, the problems of high cutting loss, low cutting efficiency, and large surface damage of silicon wafer need to be solved; The surface of wire saw line has developed from smooth surface to coated diamond abrasive, which greatly im
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Metal wire"

1

Ramsundar, Pallant Satnarine. "Wire feed metal deposition." Thesis, University of Cambridge, 2011. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.609517.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Schultz, William A. "Experimental study of composites and metal-wire joints." Thesis, Monterey, Calif. : Naval Postgraduate School, 2008. http://edocs.nps.edu/npspubs/scholarly/theses/2008/Sept/08Sep%5FSchultz.pdf.

Full text
Abstract:
Thesis (M.S. in Mechanical Engineering)--Naval Postgraduate School, September 2008.<br>Thesis Advisor(s): Kwon, Young W. "September 2008." Description based on title screen as viewed on November 4, 2008. Includes bibliographical references (p. 35). Also available in print.
APA, Harvard, Vancouver, ISO, and other styles
3

Diebold, Aaron. "Electrowetting actuation of liquid metal wires for reconfigurable electronic switches and wire-grid polarizers." University of Cincinnati / OhioLINK, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1459437829.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Heralic, Almir. "Towards full Automation of Robotized Laser Metal-wire Deposition." Licentiate thesis, University West, Department of Engineering Science, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:hv:diva-2148.

Full text
Abstract:
<p>Metal wire deposition by means of robotized laser welding offers great saving potentials, i.e. reduced costs and reduced lead times, in many different applications, such as fabrication of complex components, repair or modification of high-value components, rapid prototyping and low volume production, especially if the process can be automated. Metal deposition is a layered manufacturing technique that builds metal structures by melting metal wire into beads which are deposited side by side and layer upon layer. This thesis presents a system for on-line monitoring and control of robotized la
APA, Harvard, Vancouver, ISO, and other styles
5

Chandrasekhar, Kartik. "Mechanical and microstructural behaviour of tangled metal wire devices." Thesis, University of Sheffield, 2016. http://etheses.whiterose.ac.uk/17182/.

Full text
Abstract:
As the push towards the use of lighter and more efficient materials continues, energy dissipation from vibrating structures made from such materials is growing in importance. Viscoelastic materials have most often been employed to tackle vibration problems. In several applications, such as in the space and defence fields, the operating conditions usually do not allow for such solutions to be utilised. Tangled metal wire (TMW) devices offer an alternative damping strategy. Since the microstructure of such devices is made of metallic materials, they operate resiliently over a wide range of envir
APA, Harvard, Vancouver, ISO, and other styles
6

Nilsson, Maria. "Tribology in Metal Working." Licentiate thesis, Högskolan Dalarna, Materialteknik, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:du-11730.

Full text
Abstract:
This thesis focuses on the tribological performance of tool surfaces in two steel working operations, namely wire drawing and hot rolling. In all forming operations dimensions and surface finish of the products are of utmost importance. Forming basically includes three parts – forming conditions excluded – that may be changed; work material, tool and (possibly) lubricant. In the interface between work material and tool, the conditions are very aggressive with – generally or locally – high temperatures and pressures. The surfaces will be worn in various ways and this will change the conditions
APA, Harvard, Vancouver, ISO, and other styles
7

Klopfer, Joseph E. "An experimental study of fiberglass composites containing metal wire joints." Thesis, Monterey, California : Naval Postgraduate School, 2009. http://edocs.nps.edu/npspubs/scholarly/theses/2009/Sep/09Sep%5FKlopfer.pdf.

Full text
Abstract:
Thesis (M.S. in Mechanical Engineering)--Naval Postgraduate School, September 2009.<br>Thesis Advisor(s): Kwon, Young W. "September 2009." Description based on title screen as viewed on 6 November 2009. Author(s) subject terms: Vacuum assisted resin transfer, VARTIM, composite, fiberglass, metal wire, metal composite, Mode I, ANSYS 12.0. Includes bibliographical references (p. 39). Also available in print.
APA, Harvard, Vancouver, ISO, and other styles
8

Wennergren, Karl Fredrik. "Metal Filling of Through Silicon Vias (TSVs) using Wire Bonding Technology." Thesis, KTH, Mikro- och nanosystemteknik, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-145552.

Full text
Abstract:
Through Silicon Vias (TSVs) are vertical interconnections providing the shortest possible signal paths between vertically stacked chips in 3D packaging. In this thesis, TSVs are fabricated and two novel approaches for the metal filling of TSVs are investigated. A wire bonder is utilized to apply TSV core material in the form of gold stud bumps. The metal filling approaches are carried out by 1) squeezing stud bumps down the TSV holes by utilizing a wafer bonder and 2) stacking stud bumps on the outer periphery of the TSV holes and thereby forcing the material further down. Both approaches have
APA, Harvard, Vancouver, ISO, and other styles
9

Rhoney, Brian Keith. "Cylindrical Wire Electrical Discharge Truing of Metal Bond Diamond Grinding Wheels." NCSU, 2001. http://www.lib.ncsu.edu/theses/available/etd-20010404-133336.

Full text
Abstract:
<p>The goal of this research was to use the wire Electrical Discharge Machining (EDM) to profile a metal bond diamond grinding wheel, and then study the wear and grinding performance of the EDM trued wheel. Diamond wheels are known to exhibit low wheel wear for precision grinding of ceramics but create difficulty in creating precision trued forms. With the increased use of hard engineering ceramics in mechanical design, new methods of truing these wheels had to be investigated. In profiling a vitrified bond diamond wheel, a Computer Numerically Controlled (CNC) single point diamond or a diamon
APA, Harvard, Vancouver, ISO, and other styles
10

Medrano, Téllez Alexis G. "Fibre laser metal deposition with wire : parameters study and temperature control." Thesis, University of Nottingham, 2010. http://eprints.nottingham.ac.uk/12812/.

Full text
Abstract:
This research addresses the development of a laser metal deposition process with wire feeding and melt pool temperature control. The system consists of a2 kW fibre laser, a CNC table, a wire feeder and a temperature monitoring and control system. A study of the influence of the main parameters on the process and on the deposited bead geometry was performed. The parameters analysed were: laser power, traverse speed and wire feed rate. As a result of this study, a process window was established for metal deposition of stainless steel 308LSi (wire) on stainless steel 304 (plate). The influence of
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Metal wire"

1

Schneebeli-Morrell, Deborah. Wire & metal. MQ Publications, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

1961-, Sommer Steve, ed. Wire EDM manual. Technical Advance Pub., 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Hossack, Karin. Wirework: Using wire for beautiful home decoration. Southwater, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Diamond, Sidney. Fabrication of Pd-Cr wire. National Aeronautics and Space Administration, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Diamond, Sidney. Fabrication of Pd-Cr wire. National Aeronautics and Space Administration, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Hettmansperger, Mary. Mixed metal jewelry workshop: Combining sheet, clay, mesh, wire & more. Lark Books, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Hettmansperger, Mary. Mixed metal jewelry workshop: Combining sheet, clay, mesh, wire & more. Lark Books, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Hettmansperger, Mary. Fabulous woven jewelry: Plaiting, coiling, knotting, looping & twining with fiber & metal. Lark Books, 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Digital South Asia Library (Project), ed. A monograph on the wire and tinsel industry in Bengal. Digital South Asia Library, Center for Research Libraries, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

service), ScienceDirect (Online, ed. Wire technology: Process engineering and metallurgy. Elsevier, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Metal wire"

1

Kelbassa, Jana, and Andres Gasser. "Wire Laser Metal Deposition." In Tailored Light 2. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-030-98323-9_12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Paul, Amrit Raj, and Manidipto Mukherjee. "Metal Alloys and Beyond." In Wire Arc Additive Manufacturing. CRC Press, 2023. http://dx.doi.org/10.1201/9781003363415-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Yawar, Juneed, and Muhammad Mursaleen. "Functionally Graded Materials via Metal Additive Manufacturing." In Wire Arc Additive Manufacturing. CRC Press, 2023. http://dx.doi.org/10.1201/9781003363415-8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Dwivedi, Dheerendra Kumar. "Dissimilar Metal Joining Using Filler Wire Fed A-GTAW." In Dissimilar Metal Joining. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-1897-3_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Tomar, Bunty, and S. Shiva. "Cold Metal Transfer-Based Wire and Arc Additive Manufacturing (CMT-WAAM)." In Wire Arc Additive Manufacturing. CRC Press, 2023. http://dx.doi.org/10.1201/9781003363415-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Karmakar, Nobel, Ritam Sarma, Ranjeet Kumar Bhagchandani, and Sajan Kapil. "Investigation of the Humping Phenomenon in Wire Arc Additive Manufacturing." In Metal Matrix Composites. CRC Press, 2023. http://dx.doi.org/10.1201/9781003345466-10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Hung-Ju, Chang, Hwang Weng-Seng, Chao Long-Sun, Pan Wensen, and Lai Yi Lin. "Modeling Continuous Casting of Metal Wire Rods." In Continuous Casting. Wiley-VCH Verlag GmbH & Co. KGaA, 2006. http://dx.doi.org/10.1002/9783527607969.ch29.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Levin, Boris. "Multi-wire Structures Parallel to Metal Surface." In Wide-Range and Multi-Frequency Antennas. CRC Press, 2019. http://dx.doi.org/10.1201/9781351043243-7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Yuan, Bin, Sen Chen, Yang Wu, and Huixin Yuan. "Liquid Metal Droplet Series Based Wire Oscillation." In Advances in Artificial Intelligence and Security. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-78621-2_36.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Li, Kaisong, and Xuefeng Liu. "Metal Flow Law of Variable Diameter Metal Wire During Die Drawing." In Lecture Notes in Mechanical Engineering. Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-0107-0_56.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Metal wire"

1

Tanaka, Keisuke, Takeshi Toyama, and Takeshi Monodane. "Development of Wire Laser Metal 3D Printer." In Laser Applications Conference. Optica Publishing Group, 2024. https://doi.org/10.1364/lac.2024.ltu1b.3.

Full text
Abstract:
In the manufacturing industry, the application of Additive Manufacturing is advancing. Mitsubishi Electric has developed the "AZ600", a wire laser metal 3D printer that is the first in Japan to use a combination of metal wire as the material and laser as the heat source. It is equipped with a printing process control function that detects the printing state with various sensors and coordinates the processing conditions and axis speed, achieving stabilization and high precision in printing. In addition, by using our unique “dot forming”, it is possible to suppress thermal distortion and oxidati
APA, Harvard, Vancouver, ISO, and other styles
2

Wang, Z., E. Zhang, Z. Wang, J. Wang, and G. Li. "Characteristics of liquid metal wire discharge in water." In 2024 IEEE International Conference on Plasma Science (ICOPS). IEEE, 2024. http://dx.doi.org/10.1109/icops58192.2024.10625983.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Jia, Jin, Ying Kong, Yufeng Zhang, Ying Wang, Ling Peng, and Jingyi Ning. "High-Precision Overcurrent Detection Using Metal Wire Resistance Sampling." In 2025 6th International Conference on Electrical, Electronic Information and Communication Engineering (EEICE). IEEE, 2025. https://doi.org/10.1109/eeice65049.2025.11034325.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Kong, Lijie, Weizhi Zhang, Ziyang Fan, et al. "Flexible Conducting Wire Based on Liquid Metal and Carbon Nanotubes." In 2024 IEEE SENSORS. IEEE, 2024. https://doi.org/10.1109/sensors60989.2024.10784931.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Jiang, Quanfeng, Qiang-Ming Cai, Jincheng Tang, et al. "Study on Shielding Efficiency of Metal Wire Mesh for Cable Joints." In 2024 Photonics & Electromagnetics Research Symposium (PIERS). IEEE, 2024. http://dx.doi.org/10.1109/piers62282.2024.10617963.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Ghazialsharif, Mohammad, Junliang Dong, Anton Vorobiov, Detlef Kip, and Roberto Morandotti. "Introducing defects in metal-wire waveguides for broadband terahertz signal processing." In CLEO: Science and Innovations. Optica Publishing Group, 2024. http://dx.doi.org/10.1364/cleo_si.2024.sm2p.3.

Full text
Abstract:
We demonstrate a terahertz plasmonic signal processor by introducing defects into a two-wire waveguide. The defects are achieved by connecting two multiscale structures with inverted unit cells, leading to the occurrence of a transmission peak in the forbidden band.
APA, Harvard, Vancouver, ISO, and other styles
7

Lu, Ja-Yu, Borwen You, and Chien-Yu Chen. "Terahertz Plasmonic Sensor Based on Metal-Coated Plastic Woven Wire Mesh." In 2024 Conference on Lasers and Electro-Optics Pacific Rim (CLEO-PR). IEEE, 2024. http://dx.doi.org/10.1109/cleo-pr60912.2024.10676497.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Adhikary, Arpan, Jannatul Ambia Akhi, and Abul Kalam Ajad. "Rectangular-Shaped Metal Wire Embedded Hollow Core Fibers for THz Applications." In 2024 6th International Conference on Sustainable Technologies for Industry 5.0 (STI). IEEE, 2024. https://doi.org/10.1109/sti64222.2024.10951089.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

ZIDANI, Mosbah, Mohamed Chaouki NEBBAR, Toufik DJIMAOUI, and Salim MESSAOUDI. "MECHANICAL BEHAVIOR AND TEXTURE EVOLUTIONSTUDYOF MEDIUM CARBON STEEL WIRES DURING INDUSTRIAL WIRE-DRAWING PROCESS." In METAL 2019. TANGER Ltd., 2019. http://dx.doi.org/10.37904/metal.2019.683.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

FRISCHER, Robert, Hana SPACKOVA, and Veronika PRAZAKOVA. "WIRE MILL ENERGETIC MODEL AS A CONTROL SUPPORT." In METAL 2019. TANGER Ltd., 2019. http://dx.doi.org/10.37904/metal.2019.982.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Metal wire"

1

McSpadden, SB. Wire Electrical Discharge Truing of Metal Bond Diamond Grinding Wheels. Office of Scientific and Technical Information (OSTI), 2002. http://dx.doi.org/10.2172/814600.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Melton and Bertaso. L52016 Active Flux GTAW Welding Process for Carbon Steel Line Pipe Applications - Phase 1. Pipeline Research Council International, Inc. (PRCI), 2003. http://dx.doi.org/10.55274/r0010376.

Full text
Abstract:
The Gas Tungsten Arc Welding (GTAW) process has been used for many years in the joining of carbon steel, alloy steel and non-ferrous alloys. Its capacity to deposit an external root, the ability to choose filler metals for a wide variety of base metals, and its favorable deposition characteristics make this a versatile process which is associated with low defect susceptibility, and excellent weld metal properties. Unfortunately, the GTAW process has not historically been associated with high productivity rates. Past efforts to enhance productivity through "hot wire" technology have improved th
APA, Harvard, Vancouver, ISO, and other styles
3

Author, Unknown. L51567A Filler Wire Carbon and Residual Element Content on Mechanized Gas-Metal-Arc-Welds. Pipeline Research Council International, Inc. (PRCI), 1987. http://dx.doi.org/10.55274/r0011371.

Full text
Abstract:
This Annual Summary Report covers the first year's work from March 19, 1986 to April 17, 1987 related to evaluating the use of solid-wire, gas-metal-arc-welding (GMAW) process on control-rolled pipe steels.
APA, Harvard, Vancouver, ISO, and other styles
4

Gray. L51567 Influence of Filler Wire Carbon and Residual Element Content on the Mechanical Properties. Pipeline Research Council International, Inc. (PRCI), 1998. http://dx.doi.org/10.55274/r0010565.

Full text
Abstract:
This study was conducted to determine the interactive roles of carbon, oxygen, and nitrogen and residual elements such as titanium, chromium, copper, sulfur, phosphorous, aluminum, tin, antimony, and arsenic on weld metal mechanical properties in pipeline steels. Eleven seamless, flux-core electrodes were fabricated with varying compositions and deposited in girth welds in a 24-inch diameter, API 5LX-65 pipe using the gas-metal-arc-weld (GMAW) process. The results of Charpy V-notch and crack-tip opening displacement tests indicate that desirable toughness properties may require the addition of
APA, Harvard, Vancouver, ISO, and other styles
5

McSpadden, SB. Cylindrical Wire Electrical Discharge Machining of Metal Bond Diamond Wheels- Part II: Wheel Wear Mechanism. Office of Scientific and Technical Information (OSTI), 2002. http://dx.doi.org/10.2172/814385.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Wang, Yong-Yi. PR-350-124504-R02 Essential Welding Variables Methodology for X70-X65 Linepipe Steels. Pipeline Research Council International, Inc. (PRCI), 2015. http://dx.doi.org/10.55274/r0010887.

Full text
Abstract:
High productivity mechanized welding processes, such as variants of multi-wire pulsed-gas metal arc welding (GMAW-P) have become increasingly popular due to their high production rates. Compared to the conventional single-wire GMAW processes, the high-productivity pro-cesses are more complex in welding procedure design, qualification, and field welding. The characteristics of these high productivity processes are different from that of the traditional sin-gle-wire/single-torch GMAW or shielded metal arc (manual) welding (SMAW) processes that have dominated pipeline construction in the past. Th
APA, Harvard, Vancouver, ISO, and other styles
7

Wang, Yong-Yi, and Dan Jia. PR-350-124504-R03 Essential Welding Variables Methodology for X70 Linepipe Steels. Pipeline Research Council International, Inc. (PRCI), 2019. http://dx.doi.org/10.55274/r0011567.

Full text
Abstract:
High productivity mechanized welding processes, such as variants of multi-wire pulsed-gas metal arc welding (GMAW-P) have become increasingly popular due to their high production rates. Compared to conventional single-wire/single-torch GMAW processes, the higher productivity variants of the GMAW processes are more complex in welding procedure design, qualification, and field welding, which leads to more complex heating and cooling cycles. As a result, the deposited weld metal and heat-affected zone (HAZ) performance can be quite different from those from more traditional welding processes appl
APA, Harvard, Vancouver, ISO, and other styles
8

Author, Unknown. L51610 Pulsed Gas Metal Arc Welding of API 5LX-80 Pipe. Pipeline Research Council International, Inc. (PRCI), 1989. http://dx.doi.org/10.55274/r0010413.

Full text
Abstract:
This research program was undertaken to investigate the use of the pulsed- gas metal-arc welding (PGMAW) process for the field, girth welding of API 5LX-80 pipe. The specific program objectives were as follows: Determine the optimum shielding in gas, commercial filler wire, and weld procedure for the PGMA girth 5LX -80 pipe welding in the 5G position of API to determine the mechanical properties of PGMA girth welds deposited in five, API 5LX-80 pipes manufactured by different pipe mills. This report summarizes the materials, equipment, and procedures used, the results obtained, a discussion of
APA, Harvard, Vancouver, ISO, and other styles
9

Alexandrov, Boian. PR-650-174516-R01 Corrosion Resistant Weld Overlays for Pipeline Installations. Pipeline Research Council International, Inc. (PRCI), 2021. http://dx.doi.org/10.55274/r0012108.

Full text
Abstract:
Pipeline failure due to corrosion is a common problem in the oil and gas and petrochemical industry. A cost-effective way to prevent these failures is the application of corrosion-resistant weld overlays (WOLs) onto the internal surface of line pipe. A WOL is a deposition of a filler metal - such as a nickel-base alloy - onto the surface of a part - usually carbon or low alloy steels - to introduce desired surface properties to the original substrate [1]. As such, the service life of the substrate is increased which results in reduced costs to industries such as oil and gas and petrochemical a
APA, Harvard, Vancouver, ISO, and other styles
10

Bjella, Kevin, Daniel Vandevort, and Sarah Kopczynski. Preliminary testing of expedient ground anchor solutions for guyed towers in remote cold regions : considerations for cold remote regions with limited tools. Engineer Research and Development Center (U.S.), 2023. http://dx.doi.org/10.21079/11681/47328.

Full text
Abstract:
Ground anchors connected to guy wires for tower structures in cold climates suffer from frost heaving, which causes loss of wire tension and subsequent structural instability. It is necessary to understand what ground anchors are available to resist this tendency yet are still capable of expedient installation in remote areas. To that end, three metal, traditional ground-anchor types (arrowhead, bullet, and penetrating auger) and one novel polyvinyl chloride (PVC) T-post anchor were evaluated in frozen gravels and frozen silts at a research facility in Fairbanks, Alaska. Criteria included inst
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Metal wire' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography