Relevant bibliographies by topics / Metallurgy and Material Science

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Metallurgy and Material Science'

Author: Grafiati
Published: 4 June 2021
Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Metallurgy and Material Science.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Metallurgy and Material Science"

1

Kawakami, Masahiro. "Three Proposals for Dreaming on Material Science and Metallurgy." Materia Japan 33, no. 7 (1994): 856–57. http://dx.doi.org/10.2320/materia.33.856.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Readey, D. W. "Specific Materials Science and Engineering Education." MRS Bulletin 12, no. 4 (June 1987): 30–33. http://dx.doi.org/10.1557/s0883769400067762.

Full text
Abstract:
Forty years ago there were essentially no academic departments with titles of “Materials Science” or “Materials Engineering.” There were, of course, many materials departments. They were called “Metallurgy,” “Metallurgical Engineering,” “Mining and Metallurgy,” and other permutations and combinations. There were also a small number of “Ceramic” or “Ceramic Engineering” departments. Essentially none included “polymers.” Over the years titles have evolved via a route that frequently followed “Mining and Metallurgy,” to “Metallurgical Engineering,” to “Materials Science and Metallurgical Engineering,” and finally to “Materials Science and Engineering.” The evolution was driven by recognition of the commonality of material structure-property correlations and the concomitant broadening of faculty interests to include other materials. However, the issue is not department titles but whether a single degree option in materials science and engineering best serves the needs of students.Few proponents of materials science and engineering dispute the necessity for understanding the relationships between processing (including synthesis), structure, and properties (including performance) of materials. However, can a single BS degree in materials science and engineering provide the background in these relationships for all materials and satisfy the entire market now served by several different materials degrees?The issue is not whether “Materials Science and Engineering” departments or some other academic grouping of individuals with common interests should or should not exist.
APA, Harvard, Vancouver, ISO, and other styles
3

Wolfenden, A., and Leon-Salamanca. "Nondestructive Testing (Metallurgy and Materials Science)." Journal of Testing and Evaluation 18, no. 4 (1990): 305. http://dx.doi.org/10.1520/jte12489j.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Mukherjee, Kali. "Metallurgy/Materials Science 1985 Senior Class." JOM 37, no. 8 (August 1985): 41. http://dx.doi.org/10.1007/bf03257679.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Oki, Kensuke. "Textbooks of Metallurgy and Materials Science, and Their Circumstances;." Materia Japan 39, no. 9 (2000): 721. http://dx.doi.org/10.2320/materia.39.721.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Timofeev, A. N., and A. I. Logacheva. "FROM METALLURGY OF GRANULES TO ADDITIVE TECHNOLOGIES." Izvestiya Vuzov Tsvetnaya Metallurgiya (Proceedings of Higher Schools Nonferrous Metallurgy, no. 3 (June 14, 2018): 84–94. http://dx.doi.org/10.17073/0021-3438-2018-3-84-94.

Full text
Abstract:
OJSC «Kompozit» traces its history back to the Central Research Institute of Materials Science (CRIMS) and successfully acts as a leading material science institute in the rocket and space industry up to the present day. The enterprise uses and improves state-of-theart technologies, and creates a variety of new metal, non-metallic, composite and ceramic materials. This article provides an overview of powder sector development from the metallurgy of granules to additive technologies and shows the participation of MISIS graduates. The experience of OJSC «Kompozit» in the manufacturing of parts by selective electron beam melting (SEBM) of home-made VT6S titanium alloy powders. Initial powders are obtained by plasma centrifugal spraying of the bar stock. It is shown that the powders feature an ideal spherical shape, low defect rate, high processability and fully meet the process requirements. The microstructure and properties of samples and parts obtained by the SEBM are studied.
APA, Harvard, Vancouver, ISO, and other styles
7

Zhang, Hong, Wei Hua, and Qing Ding Wu. "Warm Compaction and Characterization of Paniculate Reinforced CSP/Al Composite Material." Applied Mechanics and Materials 423-426 (September 2013): 43–48. http://dx.doi.org/10.4028/www.scientific.net/amm.423-426.43.

Full text
Abstract:
By applying new warm compaction forming technology of wood power developed through material forming theories in some interdisciplines such as applied science of wood and powder metallurgy, cotton stalk powder (CSP) was used as base material to prepare CSP/Al composite material of which the modulus of rupture and internal bond strength could be up to 83.95MPa and 6.82MPa respectively, wear resistance was 0.05g/100r and water absorption 0.65%. The sliding bearings made of the composite materials had a crushing strength and an apparent hardness up to 91.22MPa and HB51.1 separately. They are expected to replace sintered bronze of powder metallurgy in producing sliding bearings for light textile machinery so as to reduce the usage of nonferrous metal. The application of CSP/Al composite material explores a new way to use wood residuum in agriculture and forestry and ensure its high quality and cleanness.
APA, Harvard, Vancouver, ISO, and other styles
8

Zaitsev, Alexander I. "Prospective directions for development of metallurgy and materials science of steel." Pure and Applied Chemistry 89, no. 10 (September 26, 2017): 1553–65. http://dx.doi.org/10.1515/pac-2016-1129.

Full text
Abstract:
AbstractThe features of current state of metallurgical technology and materials science of mass high-grade steels are viewed. A promising direction for principle improvement of the complex of properties and qualitative characteristics of steel including those, which are difficult to combine, is shown. It is the development of adequate physico-chemical methods of prediction and efficient technology methods of management of non-metallic inclusions, forms of presence of impurities, phases precipitations, structural state, including uniformity over the volume of metal. Additionally this approach allows reducing costs and expanding the raw material base. Its effectiveness is illustrated by the results of research carried out for a number of groups of mass high-quality steels.
APA, Harvard, Vancouver, ISO, and other styles
9

Shvedkov, E. L. "Information science for powder metallurgy." Powder Metallurgy and Metal Ceramics 32, no. 9-10 (1994): 863–64. http://dx.doi.org/10.1007/bf00560336.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Rabin, B. H., J. K. Wright, R. N. Wright, and C. H. Sellers. "Grain growth behavior in Fe3Al alloys fabricated by different methods." Journal of Materials Research 9, no. 6 (June 1994): 1384–91. http://dx.doi.org/10.1557/jmr.1994.1384.

Full text
Abstract:
Grain sizes were measured after various heat treatments in three Fe3Al alloys having similar composition that were fabricated using the techniques of ingot metallurgy (cast and wrought), hot extrusion of prealloyed powder, and hot isostatic pressing (HIP) of elemental powders. The ingot metallurgy (I/M) material exhibited normal grain growth behavior at temperatures above 750 °C, in agreement with previous observations. Both powder metallurgy (P/M) materials displayed unusual resistance to grain growth compared to the I/M alloy. In the case of the prealloyed P/M material, the initial (recrystallized) grain size was larger than the initial grain size of the I/M material, although little grain growth was observed for heat-treatment temperatures up to 1100 °C. At higher temperatures grain growth occurred at a rate comparable to that observed to the I/M alloy. The elemental powder P/M material exhibited similar grain growth behavior to the prealloyed P/M material, although the initial (as-HIPed) grain size was considerably smaller. Transmission electron microscopy (TEM) indicated that the grain growth resistance of the P/M materials could be attributed to grain boundary pinning by oxide particles presumed to originate from the powder particle surfaces. The difference in the stable grain size between the prealloyed and elemental powder P/M materials was attributed to the nature of the particle dispersions resulting from processing.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Metallurgy and Material Science"

1

Liu, Tong. "Construction of Supramolecular Structures by Mimicking Metallurgy." University of Akron / OhioLINK, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=akron160370390740064.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Lagerstedt, Anders. "On the shrinkage of metals and its effect in solidification processing." Doctoral thesis, KTH, Materials Science and Engineering, 2004. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-75.

Full text
Abstract:

The shrinkage during solidification of aluminium and iron based alloys has been studied experimentally and theoretically. The determined shrinkage behaviour has been used in theoretical evaluation of shrinkage related phenomena during solidification.

Air gap formation was experimentally studied in cylindrical moulds. Aluminium based alloys were cast in a cast iron mould while iron based alloys were cast in a water-cooled copper mould. Displacements and temperatures were measured throughout the solidification process. The modelling work shows that the effect of vacancy incorporation during the solidification has to be taken into account in order to accurately describe the shrinkage.

Crack formation was studied during continuous casting of steel. A model for prediction of crack locations has been developed and extended to consider non-equilibrium solidification. The model demonstrates that the shrinkage due to vacancy condensation is an important parameter to regard when predicting crack formation.

The centreline segregation was studied, where the contributions from thermal and solidification shrinkage were analysed theoretically and compared with experimental findings. In order to compare macrosegregation in continuous casting and ingot casting, ingots cast with the same steel grade was analysed. However, the macrosegregation due to A-segregation is driven by the density difference due to segregation. This is also analysed experimentally as well as theoretically.

APA, Harvard, Vancouver, ISO, and other styles
3

Williams, Katherine E. (Katherine Edith). "An examination of Maya metallurgy, 1150 to 1544 A.D." Thesis, Massachusetts Institute of Technology, 1990. http://hdl.handle.net/1721.1/32576.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Bezur, Aniko. "Variability in Sican copper alloy artifacts: Its relation to material flow patterns during the Middle Sican Period in Peru, AD 900-1100." Diss., The University of Arizona, 2003. http://hdl.handle.net/10150/280255.

Full text
Abstract:
The Middle Sican culture, centered in the Lambayeque region on the north coast of Peru, began successful, intensive production of arsenical copper starting around AD 900. The excavation and analysis of Middle Sican burials has revealed that artifacts made of copper-arsenic alloys played an important role in mortuary practices and ritual activities. Copper-arsenic alloy artifacts were accessible to a relatively wide cross-section of the population, though in different amounts and forms. So-called grouped artifacts, for example, have primarily been recovered from elite graves and ritual contexts. Such grouped artifacts occurred in hoards and were organized into groups by wrapping with spun yarn, vegetable fibers, and textiles. This dissertation documents the patterning of compositional and morphological variation among three types of grouped copper artifacts and builds connections between the observed patterning and material flow during production and distribution in order to explore relations among producers and consumers. Morphological homogeneity is explored in relation to the methods of manufacture involved in the production of different types of grouped artifacts as well as the number of production units whose output was pooled to form a cache. Compositional standardization is addressed in relation to the mass of an individual object as well as material flow between smelting and smithing stages of the metallurgical chaine operatoire. Hypotheses are anchored in research on the production organization of other Middle Sican crafts as well as literature discussing connections between artifact variability and production organization.
APA, Harvard, Vancouver, ISO, and other styles
5

Cinkilic, Emre. "Alloy Design and Precipitation Modeling of High Fe Concentration Recycled Cast Aluminum Alloys for Structural Applications." The Ohio State University, 2019. http://rave.ohiolink.edu/etdc/view?acc_num=osu1555599698005398.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Seifi, Seyed Mohsen. "Mechanical Property Evolution and Thermal Remediation of Aluminum Magnesium 5xxx Alloys Following Low and Intermediate Temperature Thermal Exposure." Case Western Reserve University School of Graduate Studies / OhioLINK, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=case1365507691.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Peterson, Benjamin Howard. "A Combinatorial Approach to the Development of a Creep Resistant Beta Titanium Alloy." The Ohio State University, 2008. http://rave.ohiolink.edu/etdc/view?acc_num=osu1218488816.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Young, Adam Hamilton. "Study of the Nucleation Mechanism of a-Ti in Bimodal and Fully Lamellar Microstructures Developed in the High-Strength, Near-Beta Titanium Alloy, TIMETAL®18." The Ohio State University, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=osu1374159274.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Lawson, Benjamin James. "Compositional Optimization, Mechanical Properties, and Tempering Response in Type 410 Stainless Steel Welds." The Ohio State University, 2019. http://rave.ohiolink.edu/etdc/view?acc_num=osu1557201840078564.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Johnson, Luke. "Solidification Cracking and Ductility-Dip Cracking Resistance of Ni-Base Filler Metal 52XL with Tantalum and Molybdenum Additions." The Ohio State University, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=osu1575462956102374.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Metallurgy and Material Science"

1

Pollack, Herman W. Materials science and metallurgy. 4th ed. Englewood Cliffs, N.J: Prentice-Hall, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Bhadeshia, H. K. D. H. 1953-, ed. Steels, microstructure and properties. 2nd ed. London: Edward Arnold, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Marcela, Selecká, and SpringerLink (Online service), eds. Manganese in Powder Metallurgy Steels. Cambridge: Cambridge International Science Publishing Ltd., 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Smallman, R. E. Modern physical metallurgy and materials engineering: Science, process, applications. 6th ed. Oxford: Butterworth Heinemann, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Pekgüleryüz, Mihriban Ö., K. U. Kainer, and A. Arslan Kaya. Fundamentals of magnesium alloy metallurgy. Oxford: Woodhead Publishing, 2013.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Yazawa, International Symposium on Metallurgical and Materials Processing: Principles and Technologies (2003 San Diego Calif ). Metallurgical and materials processing: principles and technologies: Yazawa International Symposium : proceedings of the International Symposium : March 2-6, 2003, San Diego, California, USA. Warrendale, Pa: TMS, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

1947-, Lai M. O., ed. Mechanical alloying. Boston: Kluwer Academic Publishers, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Edwards, Nicola. Metal: Exploring the science of everyday materials. New York: Ipicturebooks.com, 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Hosford, William F. Iron and steel. Cambridge: Cambridge University Press, 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Madras), International Symposium on "Frontiers in Design of Materials" (2005 Indian Institute of Technology. Frontiers in the design of materials. Hyderabad: Universities Press (India), 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Metallurgy and Material Science"

1

Jarvis, David John, and O. Minster. "Metallurgy in Space." In Materials Science Forum, 1–18. Stafa: Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-991-1.1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Daoush, W. M. "Processing of FeCo Nanosized Soft-Magnetic Material by Powder Metallurgy Technique." In Materials Science Forum, 707–15. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-443-x.707.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Serov, Mikhail Mikhailovich. "Powder Metallurgy." In Structural Properties of Porous Materials and Powders Used in Different Fields of Science and Technology, 83–101. London: Springer London, 2014. http://dx.doi.org/10.1007/978-1-4471-6377-0_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Martínez, M. A., J. Abenojar, J. M. Mota, and R. Calabrés. "Ultra High Carbon Steels Obtained by Powder Metallurgy." In Materials Science Forum, 328–33. Stafa: Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-423-5.328.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Bottino, M. C., D. K. Oyafuso, Paulo Guilherme Coelho, Elisa B. Taddei, Vinicius André Rodrigues Henriques, Cosme Roberto Moreira Silva, M. A. Bottino, A. H. A. Bressiani, and José Carlos Bressiani. "Ceramic Bonding to Biocompatible Titanium Alloys Obtained by Powder Metallurgy." In Materials Science Forum, 605–11. Stafa: Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-423-5.605.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Rabenberg, L. "Metallurgy of Permanent Magnet Alloys: Recent Developments." In Advanced Topics in Materials Science and Engineering, 169–86. Boston, MA: Springer US, 1993. http://dx.doi.org/10.1007/978-1-4615-2842-5_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

da Silva Rigo, Eliana Cristina, M. C. Bottino, B. D. Carraro, Elisa B. Taddei, Vinicius André Rodrigues Henriques, Cosme Roberto Moreira Silva, A. H. A. Bressiani, and José Carlos Bressiani. "Biomimetic Coatings on Ti-Based Alloys Obtained by Powder Metallurgy for Biomedical Applications." In Materials Science Forum, 599–604. Stafa: Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-423-5.599.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Arulmurugan, B., M. Sathishkumar, K. Gokulkumar, K. Mageshkumar, P. Subramani, M. Venkateshkannan, Manikandan, and Arivazhagan. "Welding Metallurgy of Corrosion Resistant 21st Century Ni-Based Superalloy 686." In Advanced Manufacturing and Materials Science, 457–63. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-76276-0_47.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Dimčić, B., M. Vilotijević, D. Božić, D. Rajnović, and M. T. Jovanović. "Microstructural and Mechanical Properties of Ti3Al-Based Intermetallics Produced by Powder Metallurgy." In Materials Science Forum, 211–16. Stafa: Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-971-7.211.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Zhao, H. T., Junchen Yao, Yue Ma, and Hui Bin Xu. "Damping Behavior of the High Strength Aluminum Alloy Prepared by Rapid Solidification and Powder Metallurgy Process." In Materials Science Forum, 2599–602. Stafa: Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-960-1.2599.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Metallurgy and Material Science"

1

"Preface: International Conference on Inventive Research in Material Science and Technology (ICIRMCT 2018)." In PROCEEDINGS OF THE INTERNATIONAL SEMINAR ON METALLURGY AND MATERIALS (ISMM2017): Metallurgy and Advanced Material Technology for Sustainable Development. Author(s), 2018. http://dx.doi.org/10.1063/1.5038679.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Dong, Kang-Cheng, and Ming-Zhu Li. "Iron-based Powder Metallurgy Steel Collar Chemical Treatment Process Test." In 2015 International Conference on Material Science and Applications (icmsa-15). Paris, France: Atlantis Press, 2015. http://dx.doi.org/10.2991/icmsa-15.2015.25.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

"Swelling of Natural Rubber/Cassava Starch Crosslinked Membrane in Ethanol Solution." In International Conference on Chemical, Metallurgy and Material Science Engineering. Emirates Research Publishing, 2015. http://dx.doi.org/10.17758/erpub.er815015.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

"Improved Deformation Behaviour of Groove Square Mild Steel Tube under Compressive Loading." In International Conference on Chemical, Metallurgy and Material Science Engineering. Emirates Research Publishing, 2015. http://dx.doi.org/10.17758/erpub.er815034.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

"A Study on Process Parameters Optimization of BD Transesterification." In International Conference on Chemical, Metallurgy and Material Science Engineering. Emirates Research Publishing, 2015. http://dx.doi.org/10.17758/erpub.er815001.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

"Effect of Particle Size and Concentration of Fly Ash on Properties of Polytrimethylene Terepthalate." In International Conference on Chemical, Metallurgy and Material Science Engineering. Emirates Research Publishing, 2015. http://dx.doi.org/10.17758/erpub.er815044.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

"Development of O&M Information Management Framework using Configuration Management for Gas Pipeline Project in Permafrost Areas." In International Conference on Chemical, Metallurgy and Material Science Engineering. Emirates Research Publishing, 2015. http://dx.doi.org/10.17758/erpub.er815049.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

"Influence of Alumina (Al2O3) Nanosized Reinforcements on Dimensional Stability of Pure Aluminum Matrix Nanocomposite." In International Conference on Chemical, Metallurgy and Material Science Engineering. Emirates Research Publishing, 2015. http://dx.doi.org/10.17758/erpub.er815036.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

"The Soil Leaching of Minerals from Mae Moh, Lampang, Thailand." In International Conference on Chemical, Metallurgy and Material Science Engineering. Emirates Research Publishing, 2015. http://dx.doi.org/10.17758/erpub.er815038.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

"Structural Properties of the Zno Nanorods on PES Substrate by Hydrothermal Method According to Growth Temperature." In International Conference on Chemical, Metallurgy and Material Science Engineering. Emirates Research Publishing, 2015. http://dx.doi.org/10.17758/erpub.er815041.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Metallurgy and Material Science"

1

Pugh, E. N., and J. G. early. Institute for Materials Science and Engineering metallurgy :. Gaithersburg, MD: National Bureau of Standards, 1985. http://dx.doi.org/10.6028/nbs.ir.85-3191.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Testardi, L. R., G. M. Ugiansky, M. Kuriyama, J. R. Manning, A. W. Ruff, K. J. Bhansali, E. N. Pugh, D. S. Lashmore, and H. N. G. Wadley. Center for Materials Science metallurgy division technical activities 1984. Gaithersburg, MD: National Bureau of Standards, January 1985. http://dx.doi.org/10.6028/nbs.ir.84-2995.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Rubinstein, A. I., R. F. Sabirianov, and Fereydoon Namavar. Material Science Smart Coatings. Office of Scientific and Technical Information (OSTI), July 2014. http://dx.doi.org/10.2172/1302423.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Johnson, J. N. Shock compression science: Dynamic material properties and computation. Office of Scientific and Technical Information (OSTI), October 1996. http://dx.doi.org/10.2172/380326.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Kehrer, Manfred, and Simon B. Pallin. Hygrothermal Material Properties for Soils in Building Science. Office of Scientific and Technical Information (OSTI), January 2017. http://dx.doi.org/10.2172/1352777.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Wu, Judy. Material Science and Physics of High-IC Coated Conductors. Fort Belvoir, VA: Defense Technical Information Center, August 2009. http://dx.doi.org/10.21236/ada562652.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Wagner, P. Material science experience gained from the space nuclear rocket program: Insulators. Office of Scientific and Technical Information (OSTI), July 1992. http://dx.doi.org/10.2172/6736381.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Vostrikov, Alexander. Physics and material science of ultra-high quality factor superconducting resonator. Office of Scientific and Technical Information (OSTI), August 2015. http://dx.doi.org/10.2172/1221362.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Graves, David Barry, and Gottlieb Oehrlein. Collaborative Research. Fundamental Science of Low Temperature Plasma-Biological Material Interactions. Office of Scientific and Technical Information (OSTI), September 2014. http://dx.doi.org/10.2172/1242540.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Dominguez, Francisco Javier, Predrag Krstic, Jean Paul Allain, Felipe Bedoya, and Bruce Koel. Quantum-Classical Science for the Plasma-Material Interface in NSTXU - Final Technical Report. Office of Scientific and Technical Information (OSTI), September 2019. http://dx.doi.org/10.2172/1567016.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Metallurgy and Material Science' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography