Books on the topic 'Metals - Rapid Solidification Processing'

Conference on Solidification Processing (4th 1997 University of Sheffield). Solidification processing 1997. Sheffield: Dept. of Engineering Materials, University of Sheffield, 1997.

United States. National Aeronautics and Space Administration., ed. The volume change during solidification. Washington D.C: National Aeronautics and Space Administration, 1985.

Merton, C. Flemings Symposium on Solidification and Materials Processing (2000 Cambridge Mass ). Proceedings of the Merton C. Flemings Symposium on Solidification and Materials Processing. Warrendale, Pa: TMS, 2001.

Rapid solidification technology for reduced consumption of strategic materials. Park Ridge, N.J., U.S.A: Noyes Publications, 1985.

A, Otooni Monde, North Atlantic Treaty Organization. Scientific Affairs Division., and NATO Advanced Research Workshop on Science and Technology of Rapid Solidification and Processing (1994 : New York, NY), eds. Science and technology of rapid solidification and processing. Dordrecht: Kluwer Academic Publishers, 1995.

Tekkō Kiso Kyōdō Kenkyūkai. Tekkō no Kyūsoku Gyōko Bukai. Kyūsoku gyōko purosesu no kiso to ōyō: Tekkō no Kyūsoku Gyōko Bukai hōkokusho = Science and technology of rapid solidification. Tōkyō: Nihon Tekkō Kyōkai, 1989.

A, Vasilʹev V., and Mitin Boris Sergeevich, eds. Vysokoskorostnoe zatverdevanie razplava: Teorii͡a︡, tekhnologii͡a︡ i materialy. Moskva: "SP Intermet Inzhiniring", 1998.

1936-, Tewari S. N., and Lewis Research Center, eds. Primary arm spacing in directionally solidified Pb-10 wt % Sn alloys. [Cleveland, Ohio: National Aeronautics and Space Administration, Lewis Research Center, 1990.

Tewari, S. N. Primary arm spacing in chill block melt spun Ni-Mo alloys. [Washington, D.C.]: National Aeronautics and Space Administration, 1986.

Inc, Technical Insights, ed. Rapid solidification technology: Key to new metals, alloys, ceramics. Englewood/Fort Lee, NJ: Technical Insights, Inc., 1987.

1931-, Steeb S., Warlimont Hans 1931-, and Deutsche Forschungsgemeinschaft, eds. Rapidly quenched metals: Proceedings of the Fifth International Conference on Rapidly Quenched Metals, Würzburg, Germany, September 3-7, 1984. Amsterdam: North-Holland, 1985.

International Conference on Rapidly Quenched Metals (6th 1987 Montréal, Québec). Rapidly quenched metals 6: Proceedings of the Sixth International Conference on Rapidly Quenched Metals, Montreal, August 3-7, 1987. Edited by Cochrane R. W and Ström-Olsen J. O. London: Elsevier, 1988.

H, Froes F., Savage S. J, and American Society for Metals. Materials Processing Committee., eds. Processing of structural metals by rapid solidification: Proceedings of a seven session symposium on enhanced properties in structural metals via rapid solidification. [Metals Park, Ohio]: ASM International, 1987.

A, Ahmad N., and National Institute of Standards and Technology (U.S.), eds. Solute trapping and solute drag in a phase-field model of rapid solidification. Gaithersburg, MD: U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 1998.

A, Ahmad N., and National Institute of Standards and Technology (U.S.), eds. Solute trapping and solute drag in a phase-field model of rapid solidification. Gaithersburg, MD: U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 1998.

MRS International Meeting on Advanced Materials (1st 1988 Tokyo, Japan). Powder preparation ; Rapid quenching: June 1-June 3, 1988, Sunshine City, Ikebukuro, Tokyo, Japan. Edited by Akashi Kazuo 1928- and Materials Research Society. Pittsburgh, Pa: Materials Research Society, 1989.

tadeusz, kulik. Pervai͡a︡ Mezhdunarodnai͡a︡ konferent͡s︡ii͡a︡ po bystroĭ zakalke metallicheskikh splavov, Varna, 11-17 mai͡a︡ 1987. [Varna?]: SĖV, 1987.

E, Borowitz, and United States. National Aeronautics and Space Administration., eds. Investigation of the microstructure of rapidly solidified alloys. [Washington, DC: National Aeronautics and Space Administration, 1987.

tadeusz, kulik. First International Conference on Rapidly Quenched Metal Alloys: Varna, May 11-17, 1987. Edited by Morgenthal Jutta. Dresden: Akademie der Wissenschaften der DDR, Zentralinstitut für Festkörperphysik und Werkstofforschung, 1987.

International Conference on Rapidly Quenched Materials (7th 1990 Stockholm, Sweden). Rapidly quenched materials: Proceedings of the Seventh International Conference on Rapidly Quenched Materials, Stockholm, Sweden, 13-17 August 1990. Edited by Frederiksson H, Savage S, and Nygren Mats. Amsterdam: Elsevier, 1991.

International Conference on Rapidly Quenched Metals (6th 1987 Montréal, Québec). Rapidly quenched metals 6: Proceedings of the Sixth International Conference on Rapidly Quenched Metals, Montréal, August 3-7, 1987. Edited by Cochrane R. W and Ström-Olsen J. O. London: Elsevier Applied Science, 1988.

J, Lavernia Enrique, Gungor M. N, and TMS Synthesis and Analysis in Materials Processing Committee., eds. Microstructural design by solidification processing: Proceedings of a symposium sponsored by the TMS Synthesis, Control, and Analysis in Materials Processing Committee held during Materials Week '92 in Chicago, Illinois, November 1-5, 1992. Warrendale, Pa: Minerals, Metals & Materials Society, 1992.

A, Otooni Monde, ed. Elements of rapid solidification: Fundamentals and applications. Berlin: Springer, 1998.

Meeting, Metallurgical Society of AIME Northeast Regional. Rapidly solidified crystalline alloys: Proceedings of a TMS-AIME Northeast Regional Meeting sponsored by the Metallurgical Society New Jersey Chapter and by the Materials Research Society, held at Morristown, New Jersey, May 1-3, 1985. Warrendale, Pa: Metallurgical Society, 1985.

International Conference on Rapidly Solidified Materials (2nd 1988 San Diego, Calif.). Rapidly solidified materials: Properties and processing : proceedings of the 2nd International Conference on Rapidly Solidified Materials, San Diego, California, 7-9 March 1988. [Metals Park, Ohio]: ASM International, 1988.

W, Lee Peter, Carbonara Robert S, American Society for Metals. Powder Metallurgy Committee., American Society for Metals. Aerospace Committee. Rapid Solidification Technology Subcommittee., and Metallurgical Society of AIME, eds. Rapidly solidified materials: Proceedings of an international conference, San Diego, California, USA, 3-5 February 1985 [i.e. 1986]. [Metals Park, OH?]: American Society for Metals, 1985.

NATO Advanced Research Workshop on "Rapid Solidification Technologies: Science and Technology of the Undercooled Melt" (1985 Theuern, Germany). Science and technology of the undercooled melt: Rapid solidification materials and technologies. Dordrecht: Published in cooperation with NATO Scientific Affairs Division [by] Martinus Nijhoff, 1986.

Center, Lewis Research, ed. A study of reduced chromium content in a nickel-base superalloy via element substitution and rapid solidification processing. [Cleveland, Ohio]: National Aeronautics and Space Administration, 1987.

L, Sastry Shankar M., MacDonald Bruce A, Metallurgical Society of AIME. Mechanical Metallurgy Committee., American Society for Metals. Flow and Fracture Committee., and AIME Meeting (114th : 1985 : New York, N.Y.), eds. Mechanical behavior of rapidly solidified materials: Proceedings of a symposium. Warrendale, Pa: Metallurgical Society, 1986.

ASM Materials Week '86 (1986 Orlando, Fla.). Processing of structural metals by rapid solidification: Proceedings of a seven session symposium on Enhanced Properties in Structural Metals via Rapid Solidification sponsored by the Materials Processing Committee of ASM's Materials Science Division held at Materials Week '86, Orlando, Fla., 6-9 October 1986. [Metals Park, Ohio]: ASM International, 1987.

D, Noebe Ronald, and United States. National Aeronautics and Space Administration., eds. The role of rapid solidification processing in the fabrication of fiber reinforced metal matrix composites. [Washington, DC]: National Aeronautics and Space Administration, 1989.

Nicholas J. Grant Symposium: Processing and Properties of Advanced High-Temperature Alloys (1985 Massachusetts Institute of Technology). Advanced high-temperature alloys: Processing and properties : Nicholas J. Grant Symposium : proceedings of the Nicholas J. Grant Symposium, Processing and Properties of Advanced High-Temperature alloys, 16-18 June 1985, Massachusetts Institute of Technology, Cambridge, Massachusetts. [Metals Park, Ohio?]: ASM, 1986.

Smith, Gary Allen. Final report on modifications to the rapid melt/rapid quench and transparent polymer video furnaces for the KC-135. Huntsville, Ala: Materials Processing Laboratory, Kenneth E. Johnson Research Center, University of Alabama in Huntsville, 1990.

F, Nesterenko V., Shtert͡s︡er A. A, and Akademii͡a︡ nauk SSSR. SKB gidroimpulʹsnoĭ tekhniki., eds. High energy working of rapidly solidified and high temperature superconducting materials: Proceedings of the international seminar, Novosibirsk, October 10-14, 1988. Novosibirsk: [SKB gidroimpulʹsnoĭ tekhniki], 1989.

Tekkō Kiso Kyōdō Kenkyūkai. Tekkō no Kyūsoku Gyōko Bukai. Kyūsoku gyōko soshiki shashinshū: Collected photographs of structures of rapidly solidified materials. Tōkyō: Nihon Tekkō Kyōkai, 1989.

C, Suryanarayana, ed. Non-equilibrium processing of materials. Amsterdam: Pergamon, 1999.

International Symposium on Experimental Methods for Materials Science Research (5th 1993 Denver, Colo.). Containerless processing: Techniques and applications. Warrendale, Pa: TMS, Minerals, Metals & Materials Society, 1993.

Abraham, Thomas. Rapidly solidified materials: Processing, new developments, applications, and market opportunities. Norwalk, CT: Business Communications Co., 1989.

S, Srivatsan T., and Sudarshan T. S. 1955-, eds. Rapid solidification technology: An engineering guide. Lancaster, Pa: Technomic Pub., 1993.

International, Symposia on Advanced Materials and Technology for the 21st Century (1995 Honolulu Hawaii). Solidification science and processing. Warrendale, Pa: The Minerals, Metals & Materials Society, 1996.

International Symposia on Advanced Materials and Technology for the 21st Century (1995 Honolulu, Hawaii). Solidification science and processing. Warrendale, Pa: The Minerals, Metals & Materials Society, 1996.

United States. National Aeronautics and Space Administration, ed. The mathematical modeling of rapid solidification processing. [Washington, D.C.]: National Aeronautics and Space Administration, 1986.

Center, Lewis Research, ed. The mathematical modeling of rapid solidification processing. [Washington, D.C.]: National Aeronautics and Space Administration, 1986.

Otooni, Monde A., ed. Science and Technology of Rapid Solidification and Processing. Dordrecht: Springer Netherlands, 1995. http://dx.doi.org/10.1007/978-94-011-0223-0.

Otooni, Monde A. Science and Technology of Rapid Solidification and Processing. Dordrecht: Springer Netherlands, 1995.

1949-, Liebermann Howard H., ed. Rapidly solidfied alloys: Processes, structures, properties, applications. New York: M. Dekker, 1993.

Fredriksson, Hasse, and Ulla Åkerlind. Solidification and Crystallization Processing in Metals and Alloys. Chichester, UK: John Wiley & Sons, Ltd, 2012. http://dx.doi.org/10.1002/9781119975540.

Ulla, Akerlind, ed. Solidification and crystallization processing in metals and alloys. Chichester, West Sussex, Eng: Wiley, 2012.

T, Tenhover, Johnson W. L. 1948-, Tanner L. E, and Materials Research Society, eds. Science and technology of rapidly quenched alloys: Symposium held December 1-3, 1986, Boston, Massachusetts, U.S.A. Pittsburgh, Pa: Materials Research Society, 1987.

Conference on Rapid Solidification Processing (4th 1986 Santa Barbara, CA). Rapid solidification processing: Principles and technologies : the fourth Conference on Rapid Solidification processing, December 15-18, 1986, University of California, Santa Barbara, California, USA. Baton Rouge, Fla: Claitor's Pub. Division, 1988.