Relevant bibliographies by topics / Method of charakteristic

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Book chapters
  4. Conference papers

Academic literature on the topic 'Method of charakteristic'

Author: Grafiati
Published: 4 June 2021
Last updated: 17 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Method of charakteristic.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Method of charakteristic"

1

Korniłłowicz, Teresa. "Occurance of geophilic of keratinophilic fungi in bottom sediments of lakes of various trophicity." Acta Mycologica 28, no. 2 (2014): 171–84. http://dx.doi.org/10.5586/am.1993.018.

Full text
Abstract:
The present investigations proved that colonization of bottom sediments with geophilie kerationophilic fungi in lakes of different trophicity was conditioned by the organic matter content. There was a relationship between occurrence of microorganisms and the basin management method. The greatest concentration of keratinophilic fungi where species typical of sewages polluted with them dominated was found in sediments of a basin used for recreation. In sediments of a lake located in the agricultural region there was a domination of species charakteristic of pure water in respect to sanitary regulations.
APA, Harvard, Vancouver, ISO, and other styles
2

Tankeliun, Tomaš. "RESEARCH OF RELATION OF SAMPLERS FREQUENCY CHARACTERISTICS / STROBAVIMO ĮTAISO DAŽNINIŲ CHARAKTERISTIKŲ SĄRYŠIO TYRIMAS." Mokslas – Lietuvos ateitis 8, no. 3 (2016): 282–88. http://dx.doi.org/10.3846/mla.2016.933.

Full text
Abstract:
This paper proposes an algorithm to reduce limitations in band-width measurements of sampling oscilloscopes then using a swept sine-wave measurement method. The traditional swept sine-wave method allow measure only magnitude response. Phase response can be computed only if a sampler is a minimal phase circuit. In this paper alternative bandwidth measurement algorithm using the nose-to-nose method with measurements corrections for the non-idle properties of oscilloscope is de-scribed. Algorithm includes for noise, time base distortions and jitter in measurement signals corrections methods. Proposed algorithm allows to measure phase and magnitude responses when only two similar oscilloscopes and the source of sync pulse are used. Algorithm performs as well as the swept sine-wave method in case when both samplers have the same frequency characteristics. Stroboskopiniai osciloskopai skirti matuoti sparčius periodinius signalus naudojant sąlyginai nesparčius didelio skiltiškumo analoginius-skaitmeninius keitiklius. Vienas iš pagrindinių stroboskopinio osciloskopo mazgų, užtikrinančių, kad osciloskopo charakteristikos atitiktų metrologinius reikalavimus, ir kuriame vyksta matuojamo aukštadažnio signalo spektro transformacija į žemų dažnių sritį, yra strobavimo įtaisas. Šiame darbe pateikiamas strobavimo įtaiso veikimo principas, nagrinėjami įtaiso dažninių charakteristikų matavimo būdai taikant pastovios amplitudės, kintančio dažnio harmoninio virpesio ir priešpriešiais sujungtų strobavimo grandinių metodus. Gauti rezultatai rodo, kad nagrinėjamas strobavimo įtaisas nepriklauso minimalios fazės grandinių klasei ir apskaičiuoti įtaiso dažninę fazės charakteristiką (DFCh) iš dažninės amplitudės charakteristikos (DACh) neįmanoma, tačiau taikant priešpriešiais sujungtų strobavimo grandinių matavimo metodą galima gauti įtaiso DACh ir DFCh nenaudojant papildomos aukštadažnės matavimo įrangos ir mažinant matavimo proceso trukmę.
APA, Harvard, Vancouver, ISO, and other styles
3

Pustina, Jaroslav, Libuše Máchová, Barbora Daňková, and Tomáš Sedloň. "Psychometrické charakteristiky revidovaného Dotazníku zvládání zátěže." TESTFÓRUM 5, no. 8 (2016): 6–18. http://dx.doi.org/10.5817/tf2016-8-126.

Full text
Abstract:
Dotazník zvládání zátěže (DZZ) je sebeposuzovací inventář vyvíjený společností T&CC online s.r.o. Cílem práce bylo ověřit vybrané psychometrické charakteristiky revidované verze inventáře. Byla provedena položková analýza a za pomocí Cronbachova alfa a koeficientu Omega byla odhadnuta reliabilita metody. Výsledky naznačují, že inventář má potenciál stát se kvalitní metodou pro měření využívání různých copingových strategií, ale vzhledem k nízké reliabilitě některých jeho škál je třeba jej ještě upravit. Dalším krokem je nahrazení nevyhovujících položek a nový pilotní průzkum.Stress Management Questionnaire is a self-rating inventory developed by the T&CC online company. The aim of the study was to evaluate selected psychometric characteristics of the revised edition of the inventory. An item analysis was conducted along with a reliability analysis using Cronbach’s alpha and Omega coefficient of reliability. The results suggest that the inventory has a potential to become a fine method for measurement of various coping strategies people employ. Yet there is a need for further development of the method due to the low reliability of some of its scales. The next steps will primarily involve replacing unsatisfactory items and conducting a new pilot study.
APA, Harvard, Vancouver, ISO, and other styles
4

BARTKO, A., and J. GOTTVALD. "Application of spectral data and computation methods for colour determination. II. Analysis of colorimetric characteristics of standards of EBC colour Scale." Kvasny Prumysl 36, no. 5 (1990): 132–35. http://dx.doi.org/10.18832/kp1990017.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Mahler, Vera. "Neue Charakteristika klinisch manifester Latexallergiker." Kompass Dermatologie 7, no. 1 (2019): 29–31. http://dx.doi.org/10.1159/000496051.

Full text
Abstract:
Background: Natural rubber latex (NRL) allergy is commonly diagnosed according to medical history, skin allergy tests, and serological analyses. However, skin tests are increasingly being abandoned because of (i) their time-consuming nature, (ii) latex preparations for skin tests being not commercially available, and (iii) the use of in-house prepared test solutions is becoming ever more difficult due to increasing regulatory hurdles. In this light, we have evaluated differences in the profiles of current and former patients with suspected latex allergy. Methods: Sera of skin test-positive patients from a historic cohort (1995-2001, n = 149 patients) and currently (2014-2015, n = 48 patients) were simultaneously analyzed for specific IgE to latex by ImmunoCAP. If the serological screening was positive (≥ 0.35 kU/l), component-resolved diagnostics including profilins and cross-reactive carbohydrate determinants (CCDs) were performed. Results: In contrast to 88% (131/149) of the skin test-positive patients from the 1990s, only 51.1% (24/47) of the current cohort were found positive for specific IgE to latex. While 48.3% (72/149) of the patients had a convincing positive history in the 1990s, current skin test-positive patients rarely reported a relevant medical history (8.5%, 4/47). Specific IgE levels to latex were significantly higher in former patients with suspected latex allergy (p < 0.001) than in former sensitized individuals without allergy. However, this significant difference was lost in current allergic and sensitized patients with positive skin tests. Conclusion: Sensitization profiles in patients with latex allergy have changed significantly over the last 2 decades. Discrimination between NRL sensitization and clinical allergy remains a diagnostic challenge. Our data highlight the need for a combination of all 3 criteria, i.e., patient history, skin test, and analysis of specific IgE, for a correct diagnosis of latex allergy.
APA, Harvard, Vancouver, ISO, and other styles
6

Preuss, U. W., G. Koller, M. Bottlender, et al. "Suizidversuche bei Alkoholabhängigen: klinische Charakteristika und Differenzierung nach der verwendeten Methode." Fortschritte der Neurologie · Psychiatrie 74, no. 2 (2006): 77–84. http://dx.doi.org/10.1055/s-2005-870916.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Brunzel, Johannes, Johannes Schmidt, and Dietrich von der Oelsnitz. "Nicht-reaktive Messungen in der Managementforschung." WiSt - Wirtschaftswissenschaftliches Studium 49, no. 11 (2020): 4–9. http://dx.doi.org/10.15358/0340-1650-2020-11-4.

Full text
Abstract:
Der Beitrag analysiert die Charakteristika sog. nicht-reaktiver Messungen, die sich zunehmend in den Wirtschaftswissenschaften, insbesondere in der Managementforschung, durchsetzen. Diese Methode hat das Potenzial, grundlegende Probleme, wie z. B. ein schwieriger Zugang zu Probanden oder die offensichtliche soziale Erwünschtheit von Antworten, im Zeitalter großer Datenmengen zu mindern. Dabei zeigt der Beitrag eine Auswahl an aktuellen Beispielen aus der akademischen Managementliteratur.
APA, Harvard, Vancouver, ISO, and other styles
8

Brunzel, Johannes, Johannes Schmidt, and Dietrich von der Oelsnitz. "Nicht-reaktive Messungen in der Managementforschung." WiSt - Wirtschaftswissenschaftliches Studium 49, no. 11 (2020): 4–9. http://dx.doi.org/10.15358/0340-1650-2020-11-4.

Full text
Abstract:
Der Beitrag analysiert die Charakteristika sog. nicht-reaktiver Messungen, die sich zunehmend in den Wirtschaftswissenschaften, insbesondere in der Managementforschung, durchsetzen. Diese Methode hat das Potenzial, grundlegende Probleme, wie z. B. ein schwieriger Zugang zu Probanden oder die offensichtliche soziale Erwünschtheit von Antworten, im Zeitalter großer Datenmengen zu mindern. Dabei zeigt der Beitrag eine Auswahl an aktuellen Beispielen aus der akademischen Managementliteratur.
APA, Harvard, Vancouver, ISO, and other styles
9

Hedicke-Claus, Y., J. Langner, M. Stonis, and B. A. Behrens. "Klassifizierung von Schmiedeteilen mittels KNN/AI enables automated recognition and classification of geometrically complex forged parts." wt Werkstattstechnik online 109, no. 11-12 (2019): 822–27. http://dx.doi.org/10.37544/1436-4980-2019-11-12-24.

Full text
Abstract:
Im Beitrag wird eine Methode auf Basis Künstlicher Neuronaler Netze vorgestellt, die es erlaubt, schmiedetechnisch hergestellte Bauteile automatisiert zur Einordnung in Formenklassen zu klassifizieren. Dadurch ist es möglich, direkt aus der CAD-Datei des Schmiedeteils eine Formenklasse und für die Auslegung des Prozesses relevante Charakteristika zu ermitteln, die in einem übergeordneten Ziel dazu genutzt werden, eine automatisierte Stadienplanung durchzuführen.   This paper presents a method for the automated classification of forged parts for classification into the Spies order of shapes by artificial neural networks. The aim is to develop a recognition program within the framework of automated forging sequence planning, which can directly identify a shape class from the CAD file of the forged part and characteristics of the forged part relevant for the design of the process.
APA, Harvard, Vancouver, ISO, and other styles
10

Hirai, Masafumi. "Prävalenz und Charakteristika von Muskelkrämpfen bei Patienten mit Varikosis." Vasa 29, no. 4 (2000): 269–73. http://dx.doi.org/10.1024/0301-1526.29.4.269.

Full text
Abstract:
Background: It has been suggested that limb circulation may be disturbed in patients with muscle cramps due to leg venous hypertension. The aim of this study was to examine the incidence and characteristics of muscle cramps from venous insufficiency. Patients and methods: The incidence and characteristics of muscle cramps, which were investigated by a questionnaire, were compared between 288 patients with incompetence of the long or short saphenous vein and 550 age-matched individuals from the general population. Results: The patient group showed a significantly higher incidence of muscle cramps in the last year than the general population group, 67% and 53%, respectively (p < 0.001). The incidence of calf cramps was significantly higher in the patient group than in the general population group, 91% and 75%, respectively (p < 0.001). Although most subjects reported symptoms occurring only at night, the incidence was significantly higher in the patient group than in the general population group, 78% and 52%, respectively (p < 0.001). There was no significant difference in the duration or severity of muscle cramps between the groups. The patient group showed a significantly higher incidence of more than 12 episodes per year than the general population group (p < 0.001). Conclusions: Muscle cramps in patients with varicose veins occur more frequently and more often at night and in the calf in comparison with those from the general population.
APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Method of charakteristic"

1

Pavelka, František. "Využití Fluentu při výpočtech nestacionárního proudění v rozsáhlých sítích." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318136.

Full text
Abstract:
The main objective of this Master´s thesis is the appropriate calculation proposal of pressure and discharge conditions in extensive ducts in unsteady flow. The calculation proposal was aimed at the conenction of two commercial programmes. Exacly the programme Ansis Fluent and Matlab, which deals with the connection of onedimensional (1D) calculation in Matlab and multidimensional (2D) calculation in Ansys Fluent programme. This Mastr’s thesis also deals with creation of the independent 1D model (Matlab, method of characteristic) and independent 2D model flow (Ansys Fluent, Inviscid model).
APA, Harvard, Vancouver, ISO, and other styles
2

Hudcová, Lucie. "Metoda stanovení charakteristik atmosférického přenosového prostředí v optické oblasti spektra." Doctoral thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-233513.

Full text
Abstract:
This dissertation is focused on the determination of turbulent atmospheric transmission media properties. The concept of new method for turbulent attenuation designation is presented – the method of available power. This method comes from laser beam intensity profile analysis. The next point of this work is relative variance of optical intensity study. On the basis of experimental measurements relative variance of optical intensity is non-uniformly distributed in laser beam intensity profile. This non uniform distribution is subordinated to angular coefficient of intensity profile curve. Due to this information we can determine optimal laser beam shape to minimize influence of turbulent atmosphere.
APA, Harvard, Vancouver, ISO, and other styles
3

Pavlík, Václav. "Dynamická charakteristika zpětné armatury." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-240979.

Full text
Abstract:
This master´s thesis provides an overview of all designs of check valves, their usage and typical features. Main purpose of this work is to clear up the phenomenon of check valve slam and the other problems that occur during transients. The check valve slam was measured at the test rig in the hydraulic laboratory. For unsteady flow evaluation after pump shut down was used Gibson method. The dynamic characteristic was possible to create by results from this method. It was achieved without impact of the speed of sound in the fluid. This work also contains 2D transient CFD calculations, which was used for evaluation of the hydrodynamic torque acting on the hinge pin. This approach provides an option to calculate wide range of cases at the expense of not entirely exact geometry. The main contribution of the theoretical study at the beginning of this thesis is its entireness. It might give an important clue when right valve is selecting. For good choice of valve might be helpful to use dynamic characteristics in this thesis presented. Mentioned characteristics were created by new way and its background is in measurements and simplified CFD calculations.
APA, Harvard, Vancouver, ISO, and other styles
4

Churý, Tomáš. "Stanovení modálních charakteristik celokompozitového křídla s využitím MKP metod." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-232093.

Full text
Abstract:
The diploma thesis deals with the creation of a detail FEM model all-composite wing of glider. Reduction created FEM model of the beam model. The models are calculated natural frequencies, vibration shapes wings and then subsequently compared the results of analyzes of both models.
APA, Harvard, Vancouver, ISO, and other styles
5

Haratek, Marek. "Měření charakteristiky torzních stabilizátorů náprav vozidel." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-445162.

Full text
Abstract:
This diploma thesis deals with the measurement of the torsion stabilizer characteristics. The beginning of the thesis explains the function of a torsion stabilizer in a vehicle and introduces various technical options of stabilization. Next part is focused on computational simulation of representative stabilizers. Next parts are devoted to proposition of measuring device for torsion stabilizers in the laboratory and execution of the experiment. In the final part multibody model is created to demonstrate achieved results.
APA, Harvard, Vancouver, ISO, and other styles
6

Urbánek, Radim. "Frekvenční charakteristiky." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2007. http://www.nusl.cz/ntk/nusl-412762.

Full text
Abstract:
The aim of this MSc Thesis is to create a system for automatic generation of frequency characteristics of electrical circuits. These circuits are described by differential equations. A special simulator of RLC circuit has been created and frequence response, vector diagram can be generated. This system has been mainly suggested for application in education. The process of solving differential equations is based on the Taylor method. Systems in general is the theoretical part of this project. Different definitions of systems their divission ,basic phenomenons and mathematical devices are described there. Next chapter deals with the mathematical devices for solving differential equations which makes the basis for description of phenomenons in these systems. There are also systems TKSL and TKSL/C. In the next chapter I was investigaty the analyze of vector diagrams for simple and more difficult circuits. I have found a solution for actual circuit by this technique. The last chapter is devoted to the frequency characteristics and descriptions of simulation program for generation the frequency characteristics.
APA, Harvard, Vancouver, ISO, and other styles
7

Novák, Jan. "Měření dynamických charakteristik zpětných armatur." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318147.

Full text
Abstract:
Master thesis presents overview of existing types of check valves, their features, uses and issue called "cracking". Experimental part of this thesis focuses on the lift and swing check valves. Results of the measurement are evaluated from non-stationary flow point of view by developing and analyzing static and dynamic characteristics. This thesis takes into account losses and dynamic effects as main viewpoints. Two methods for measuring non-stationary velocities are used. Direct method called Gibson and indirect method laser doppler anemometry. Goal of the master thesis is to increase understanding of the check valves and their applicability.
APA, Harvard, Vancouver, ISO, and other styles
8

Ďurdina, Lukáš. "Stanovení charakteristik spreje pomocí optických měřících metod." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230349.

Full text
Abstract:
Diplomová práce se zabývá měřením charakteristik sprejů dvou tlakových vířivých trysek pro spalovací komoru malého turbínového motoru na zkušebním stavu za studena pomocí metod Particle Image Velocimetry (PIV) a fázové Dopplerovské anemometrie (PDA). Cílem měření bylo stanovit a porovnat charakteristiky sprejů obou trysek. Výsledky měření mají objasnit rozdílnost chování trysek za provozu a možný dopad na proces spalování. Úvodní teoretická část pojednává o základních fyzikálních principech atomizace kapalin, konstrukci a oblasti uplatnění tlakových vířivých trysek a o principech laserových diagnostických metod použitých při experimentálním měření. Nasledující část popisuje návrh a montáž zkušební trati a dalších zařízení navržených pro experimentální měření v této práci. Experimentální část se zabývá nastavením parametrů měřícího systému a zpracováním dat. Výsledky měření zahrnují vektorová rychlostní pole, axiální rychlostní profily a distribuce velikosti kapek pro různé provozní podmínky obou trysek.
APA, Harvard, Vancouver, ISO, and other styles
9

Zikmund, Pavel. "Identifikace aerodynamických charakteristik atmosférického letadla z výsledků letových měření." Doctoral thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-234162.

Full text
Abstract:
The thesis deals with aerodynamic characteristics identification from flight measurement. The topic is part of flight mechanic – handling qualities. The first theoretic part consists of three identification methods description: Error equation method, Output error method and Filter error method. Mathematical model of an airplane is defined and restricted to the motion with 3 degree of freedom. There is also introduced simulation of flight measurement for identification software validation. Practical part is focused on experiment preparation, execution and evaluation. The airplane VUT 700 Specto had been chosen to carry out flight tests. The airplane was modified to the new electric powered VUT 700e Specto after first measurement flights with combustion engine. Data record from on-board measurement unit was completed by telemetric data from autopilot and remote control system. Flight tests were carried out in stabilised mode of autopilot in symmetric flight. The results were confronted with analytical analysis results and DATCOM+ software parameter estimation.
APA, Harvard, Vancouver, ISO, and other styles
10

Ivičič, Vojtěch. "Numerické charakteristiky kvality obrazů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-231023.

Full text
Abstract:
This thesis deals with quality of digital images and with methods for measurement their numerical characteristics. Our attention is drawn to measurement of sharpness, as a main factor of image quality, in both space and spectral domain. For this reason, the Fourier and the discrete Fourier transform is described in one and two dimensions. Methods, presented in this work and implemented on attached CD, can be used for automatic image quality classification and autofocus of optical systems.
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Method of charakteristic"

1

Labudde, Dirk, and Marleen Mohaupt. "Genetischer Fingerabdruck – Charakteristik und Methoden." In Bioinformatik im Handlungsfeld der Forensik. Springer Berlin Heidelberg, 2018. http://dx.doi.org/10.1007/978-3-662-57872-8_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Säugling, Carolin. "Social-Media-Analysen in der Automobilindustrie." In Die Praxis der Social-Media-Analyse. Springer Fachmedien Wiesbaden, 2021. http://dx.doi.org/10.1007/978-3-658-35121-2_5.

Full text
Abstract:
ZusammenfassungKapitel 5 beinhaltet erste Ergebnisse der empirischen Untersuchung und weist am Ende jedes Abschnitts ein Zwischenfazit auf. Social-Media-Analysen in der deutschen Automobilindustrie werden rekonstruiert, indem diese Studie zunächst die angewandte Praxis von Social-Media-Analysen nachzeichnet. Es waren zwei Varianten der Methode auszumachen und drei Arten der methodischen Umsetzung und praktischen Durchführung zu erkennen. Sämtliche Optionen der Praxis stellt diese Arbeit gesondert vor. Daraufhin geht es um Social-Media-Analysen als Methode. Dargestellt wird dies, indem zunächst deren Charakteristika gezeigt werden, um anschließend sowohl die Vorteile als auch die Nachteile der Methode der Social-Media-Analysen zu beschreiben. Am Ende des Kapitels werden Social-Media-Analysen auf andere Methoden bezogen und mit diesen verglichen. Nach einer Gegenüberstellung mit der Marktforschung richtet sich der Blick gesondert auf die jeweiligen Potentiale beider. Ferner werden die spezifischen Herausforderungen der Methode der Social-Media-Analysen zusammengefasst und es wird die festzustellende Tendenz beschrieben, die Methode nicht für sich alleine sprechen und stehen zu lassen.
APA, Harvard, Vancouver, ISO, and other styles
3

Kelsch, Jakob. "Einleitung: Video-on-Demand – Quell der Innovation?" In Binging Family. Springer Fachmedien Wiesbaden, 2021. http://dx.doi.org/10.1007/978-3-658-34766-6_1.

Full text
Abstract:
ZusammenfassungIn der Einleitung der Untersuchung werden Forschungsfrage und Methodik dargelegt. Zudem werden grundlegende Charakteristika des audiovisuellen Erzählens skizziert und das Analysekorpus vorgestellt. In Zeiten ubiquitärer Digitalisierung verdrängen Streaming-Dienste den traditionellen Film- und Fernsehkonsum. Video-on-Demand-Serien weichen auf Produktions-, Distributions- und Rezeptionsebene von konventionellen TV-Serien ab. Dementsprechend liegt es nahe, ein allgemeinen Wandel des Formats „Serie“ anzunehmen, auch da der Innovationscharakter der Video-on-Demand-Serien von journalistischer Seite häufig betont wurde. Anhand eines prominent medial verhandelten Aspekts des gesellschaftlichen Lebens, nähere ich mich diesem potenziellen Wandel auf inhaltlicher Ebene an: Familie als Keimzelle des Privaten. Die Forschungsfrage lautet: Welche Modelle und Ideale von Familie dominieren in der Video-on-Demand-Serie und welche gesellschaftlichen und kulturellen Paradigmen werden als zentral gesetzt?
APA, Harvard, Vancouver, ISO, and other styles
4

"Die Sprachauffassung Lamberts: Zwischen Charakteristik und Metaphorisierung." In Geschichte der Hermeneutik und die Methodik der textinterpretierenden Disziplinen. De Gruyter, 2005. http://dx.doi.org/10.1515/9783110924534.221.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Lüdtke, Nico. "5. Scholastische Methode und die Buchbezogenheit gelehrten Wissens – Charakteristika der frühneuzeitlichen Wissensordnung." In Das Soziale ohne Grenzen? Velbrück Wissenschaft, 2015. http://dx.doi.org/10.5771/9783845277516-143.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Method of charakteristic"

1

Jokubavičiūtė, Rita, and Arminas Stanionis. "GEODEZINIŲ TINKLŲ DEFORMACIJŲ TYRIMAS BALTIJOS REGIONE NAUDOJANT PASTOVIŲJŲ GPNS STOČIŲ MATAVIMŲ DUOMENIS." In Conference for Junior Researchers „Science – Future of Lithuania“. VGTU Technika, 2018. http://dx.doi.org/10.3846/geo.2018.005.

Full text
Abstract:
Straipsnio tikslas – įvertinti geodezinio tinklo deformacijų charakteristikas Baltijos teritorijoje. Skaičiavimams naudoti 2012 ir 2017 m. atliktų GPNS stočių kartotiniai matavimų duomenys. Erdvinės geodezinio tinklo deformacijų charakteristikos įvertintos baigtinių elementų metodu tenzorinės analizės būdu: poslinkiai koordinačių ašių kryptimis, santykinės linijinės deformacijos, santykinės šlyties deformacijos. „ArcMap“ programa sudarytos nustatytų charakteristikų izogramos.
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography