Books on the topic 'Method of testing'

Institution, British Standards. Testing coated fabrics.: Method 39. London: BSI, 1993.

Institution, British Standards. Testing coated fabrics.: Method 28. London: B.S.I, 1993.

American, Society of Heating Refrigerating and Air-Conditioning Engineers. Method of testing liquid-chilling packages. Atlanta, Ga: American Society of Heating, Refrigerating and Air-Conditioning Engineers, 1995.

Tyler, Ruth. Viral disinfectant testing: A proposed method. Birmingham: University of Birmingham, 1987.

American, Society of Heating Refrigerating and Air-Conditioning Engineers. Method of testing for room air diffusion. Atlanta, GA (1791 Tullie Cir., NE, Atlanta 30329): American Society of Heating, Refrigerating, and Air-Conditioning Engineers, 2005.

Joyce, Richard Kirk. A method of testing two-dimensional airfoils. Monterey, Calif: Naval Postgraduate School, 1992.

American Society of Heating, Refrigerating and Air-Conditioning Engineers. Method of testing direct evaporative air coolers. Atlanta, GA: American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc., 2001.

Standards Association of Australia. Committee BD/42, Methods of Testing Concrete. Methods of testing concrete: Method for the determination of bleeding of concrete. 3rd ed. [North Sydney, N.S.W.]: Standards Australia, 1999.

Spaulding, William. ASNT level II study guide: Radiograph Testing Method. 2nd ed. Columbus, OH: American Society for Nondestuctive Testing, Inc., 2002.

Lucas, S. V. Heated purge and trap method development and testing. Cincinnati, OH: U.S. Environmental Protection Agency, Environmental Monitoring and Support Laboratory, 1988.

Lucas, S. V. Heated purge and trap method development and testing. Cincinnati, OH: U.S. Environmental Protection Agency, Environmental Monitoring and Support Laboratory, 1988.

Chen, Hsiou-Lien. Fabric soil-removal test method. Corvallis, Or: Agricultural Experiment Station, Oregon State University, 1998.

Chen, Hsiou-Lien. Fabric soil-removal test method. Corvallis, Or: Agricultural Experiment Station, Oregon State University, 1998.

Standards Association of Australia. Committee BD/42, Methods of Testing Concrete. Methods of testing concrete, method 3: Determination of properties related to the consistency of concrete. Homebush, N.S.W: Standards Australia, 1998.

Cognitive assessment: An introduction to the rule space method. New York: Routledge, 2009.

Standards Association of Australia. Committee BD/42, Methods of Testing Concrete. Methods of testing concrete: Method for making and curing concrete - compression and indirect tensile test specimens. 3rd ed. [North Sydney, N.S.W.]: Standards Australia, 1985.

Miller, Jennifer A. Biological test method. Ottawa: Environment Canada, 1999.

Björkman, Jouni. Test method for self-ignition of materials. Espoo, Finland: VTT, Technical Research Centre of Finland, 1992.

Mangs, Johan. A new method for the testing of smoke vents. Espoo, Finland: VTT, Technical Research Centre of Finland, 1992.

Luminaires, IESNA Testing Procedures Committee Subcommittee on Photometry of Indoor. Approved method for photometric testing of indoor fluorescent luminaires. New York: Illuminating Engineering Society of North America, 1998.

Winandy, Jerrold E. Evaluation of a method for testing adhesive-preservative compatibility. [Madison, Wis.?: USDA Forest Service, Forest Products Laboratory?], 1986.

Eick, Charles W. ASNT level III study guide: Liquid penetrant testing method. 2nd ed. Columbus, OH: American Society for Nondestructive Testing, 2003.

Pessiki, Stephen P. Measurement of the setting time and strength of concrete by the impact-echo method. Gaithersburg, MD: U.S. Dept. of Commerce, National Bureau of Standards, National Engineering Laboratory, Center for Building Technology, Structures Division, 1987.

Pessiki, Stephen P. Measurement of the setting time and strength of concrete by the impact-echo method. Gaithersburg, MD: U.S. Dept. of Commerce, National Bureau of Standards, National Engineering Laboratory, Center for Building Technology, Structures Division, 1987.

Psychophysics: Method, theory, and application. 2nd ed. Hillsdale, N.J: L. Erlbaum Associates, 1985.

McLeay, D. J. Biological test method. 2nd ed. Ottawa: Environment Canada, 2000.

Illuminating Engineering Society of North America. Photometry of Light Sources Subcommittee. IESNA approved method for photometric testing of reflector-type lamps. New York, N.Y: Illuminating Engineering Society of North America, 1994.

Cottone, Lawrence. Test method evaluations and emissions testing for rating wood stoves. Research Triangle Park, NC: U.S. Environmental Protection Agency, Air and Energy Engineering Research Laboratory, 1987.

Quirouette, R. L. Testing rainscreen wall and window systems: The cavity excitation method. Ottawa: Canada Mortgage and Housing Corporation, 1996.

IESNA Testing Procedures Committee. Subcommittee on Photometry of Indoor Luminaires. IES approved method for photometric testing of indoor fluorescent luminaires. New York, N.Y: Illuminating Engineering Society of North America, 1987.

Cottone, Lawrence. Test method evaluations and emissions testing for rating wood stoves. Research Triangle Park, NC: U.S. Environmental Protection Agency, Air and Energy Engineering Research Laboratory, 1987.

Kaksonen, Rauli. A functional method for assessing protocol implementation security. Espoo [Finland]: Technical Research Centre of Finland, 2001.

Kennedy, K. C. Development of proposed standard test method for spray painting transfer efficiency. Research Triangle Park, NC: U.S. Environmental Protection Agency, Air and Energy Engineering Research Laboratory, 1988.

Kennedy, K. C. Development of proposed standard test method for spray painting transfer efficiency. Research Triangle Park, NC: U.S. Environmental Protection Agency, Air and Energy Engineering Research Laboratory, 1988.

Drexler, E. S. Procedures for the electron-beam moiré technique. Gaithersburg, MD: U.S. Dept. of Commerce, National Institute of Standards and Technology, 1997.

American Society of Heating, Refrigerating and Air-Conditioning Engineers. Method of testing forced circulation air cooling and air heating coils. Atlanta, GA: American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc., 2000.

Institute, American National Standards, and American Society of Heating, Refrigerating and Air-Conditioning Engineers., eds. Method of testing propeller fan vibration-- diagnostic test methods. Atlanta, GA: American Society of Heating, Refrigerating, and Air-Conditioning Engineers, 2006.

Beydeda, Sami. Self-Testing COTS Components (STECC) Method. Lang GmbH, Internationaler Verlag der Wissenschaften, Peter, 2004.

C, Chiang T., and Environmental Monitoring Systems Laboratory (Las Vegas, Nev.), eds. Performance testing of method 1312: QA support for RCRA testing. Las Vegas, NV: U.S. Environmental Protection Agency, Environmental Monitoring Systems Laboratory, 1989.

C, Chiang T., and Environmental Monitoring Systems Laboratory (Las Vegas, Nev.), eds. Performance testing of method 1312: QA support for RCRA testing. Las Vegas, NV: U.S. Environmental Protection Agency, Environmental Monitoring Systems Laboratory, 1989.

American Society of Heating, Refrigerating and Air-Conditioning Engineers. and American National Standards Institute, eds. Method of testing commercial refrigerators and freezers. Atlanta, GA: American Society of Heating, Refrigerating, and Air-Conditioning Engineers, 2005.

Spaulding, William. Level II study guide: Ultrasonic testing method. American Society for Nondestuctive Testing, Inc, 1999.

Spaulding, William. Level II study guide: Radiographic testing method. American Society for Nondestuctive Testing, Inc, 1998.

Biological test method. Ottawa, Ont., Canada: Environment Canada, 1990.

Huang, Jianhong. An infrared test method to measure coating immobilization. 1995.

Institute, American National Standards, and American Society of Heating, Refrigerating and Air-Conditioning Engineers., eds. Method of testing for rating residential water heaters. Atlanta, GA: American Society of Heating, Refrigerating, and Air-Conditioning Engineers, 2006.

National Association of Corrosion Engineers., ed. Standard test method: Laboratory corrosion testing of metals. Houston: NACE, 2000.

Air Movement and Control Association., ed. Reverberant room method for sound testing of fans. [Arlington Heights, Ill.]: Air Movement Control Assn., 1986.

National Association of Corrosion Engineers., ed. Standard test method: Laboratory corrosion testing of metals. Houston: NACE, 2000.

National Association of Corrosion Engineers., ed. Standard test method: Laboratory corrosion testing of metals. Houston: NACE, 2004.