Relevant bibliographies by topics / Metoda polární

Contents

  1. Dissertations / Theses

Academic literature on the topic 'Metoda polární'

Author: Grafiati
Published: 4 June 2021
Last updated: 17 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Metoda polární.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Dissertations / Theses on the topic "Metoda polární"

1

Buryová, Tereza. "Fyzikální fenomén jako architektonická tvůrčí metoda." Master's thesis, Vysoké učení technické v Brně. Fakulta architektury, 2017. http://www.nusl.cz/ntk/nusl-316332.

Full text
Abstract:
Cellular_ polar research station Antarctica is the driest, the busiest and most extensive place on Earth, half-year-shrouded. People still live here. They set up the research stations in which they live and work. In these extreme climatic conditions, the station originates and disappears due to natural behaving. Stations provide researchers with safety and space for research, including comfort. They are built in different ways and provide different comforts, according to technological and transport options.
APA, Harvard, Vancouver, ISO, and other styles
2

Hubáček, David. "Měření posunů a přetvoření střešní konstrukce." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2020. http://www.nusl.cz/ntk/nusl-414307.

Full text
Abstract:
The thesis deals with the evaluation of displacements and deformation of the large span wooden roof structure of the aquapark hall in Brno - Kohoutovice. The task of this work is to compare and verify the applicability of the laser scanning method for the evaluation of displacements and deformation. The comparison was performed with regard to the polar method with quantities measured by the total station. As part of the work, two-stage measurements were performed on the basis of which a comparison of both methods was performed. The data obtained by the polar method were processed using LSM, the data from laser scanning were processed in an Excel spreadsheet. A comparison of the two methods shows that we have achieved a similar level of accuracy with the laser scanning method when compared to the polar method. It is therefore possible to use the laser scanning method to measure displacements and deformation.
APA, Harvard, Vancouver, ISO, and other styles
3

Klinčík, Radoslav. "Měření posunů a přetvoření střešní konstrukce sportovní haly." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2021. http://www.nusl.cz/ntk/nusl-444252.

Full text
Abstract:
Diploma thesis describes the measurement and evaluation of displacements and deformations of the wooden roof structure of the aquapark hall in Brno – Kohoutovice. Part of the work is devoted to the preparation and testing of used devices and tools. The main part of the work consists of performing one stage of measurement using the polar method and the laser scanning method. The polar method measurement is compared with the results of the polar method of the previous stage. The next part of the work deals with the comparison of the polar method and the laser scanning method measured in the last stage. The results achieved are interpreted in the final part of the work.
APA, Harvard, Vancouver, ISO, and other styles
4

Baladová, Vendula. "Zaměření fary a přilehlých hospodářských stavení v Čučicích." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2018. http://www.nusl.cz/ntk/nusl-390201.

Full text
Abstract:
The diploma thesis deals with measurement of the interior of a parish building and its close surroundings in Čučice. Necessary steps for creating the thematic map and the building documentation are described in this thesis. First the preparatory work was made, which means that ground reconnaissance was made and required equipment and tools were chosen. In the next part the measurements, which include the construction of an auxiliary measuring network, the measurement of the detailed and control points, are described. After the measurement work, the office work followed, the coordinates and the heights of the auxiliary and detailed points were specified. The accuracy of the map according to ČSN 01 3410 was tested. Finally a thematic map in scale 1: 500 and the building drawings in scale 1:50: 1st floor plan, 2nd floor plan, longitudinal and cross-section were created.
APA, Harvard, Vancouver, ISO, and other styles
5

Staněk, Boleslav. "Měření přetvoření mostní konstrukce a železničního svršku." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-226600.

Full text
Abstract:
This diploma thesis deals with the phases measuring deformation of the bridge construction and railway superstructure on the bridge over the river Dyje in Breclav and its surroundings. The main goal was to determine the longitudinal displacements of the rail web and the bridge structure. The object of this thesis was also transverse displacements which have been caused mainly due to temperature changes. The introduction describes the location. The following section discusses the methodology terrestrial deformation measurements and calibrations selected surveying devices. Furthermore, there is stated the processing of measurements and the calculations. In conclusion, the thesis evaluates the longitudinal and transverse displacements, which are shown in the annexes.
APA, Harvard, Vancouver, ISO, and other styles
6

Suchánek, Zbyněk. "Určení přetvoření železničního svršku." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-226602.

Full text
Abstract:
The aim of this master thesis was to measure and evaluate shifts of rail strip and deck of the bridge in the 0,206 km route Zábřeh - Bludov across the river Moravská Sázava. The measurement was performed by classical geodetic methods. The result of the study was evaluation of the three periods of deformation measurements and numerical and graphical documentation. Shifts were caused especially by changes in temperature and operational effects.
APA, Harvard, Vancouver, ISO, and other styles
7

Chaloupka, Roman. "Vyhotovení mapových podkladů areálu Metra v Blansku - severní část." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2019. http://www.nusl.cz/ntk/nusl-400159.

Full text
Abstract:
The diploma thesis deals with the creation of map bases in the northern part of the Metra areal in Blansko in the form of a thematic map in a scale 1:250. Descriptive information for each element has been added to the map. The thesis describes in detail the process of creating a measuring network, detailed survey, calculations, testing accuracy and creation of a thematic map including descriptive information.
APA, Harvard, Vancouver, ISO, and other styles
8

Zbránek, Jakub. "Měření horizontálních a vertikálních posunů gabionové zdi." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-226754.

Full text
Abstract:
The main subject of this diploma thesis is monitoring of horizontal and vertical displacements of the supporting wall in village Smědčice. The thesis describes the whole production process, from construction of the reference net and the net of observed points to the final review. There are also displayed main theoretical basis. Final outputs of the thesis are charts, graphical sketches, tables and final word summary.
APA, Harvard, Vancouver, ISO, and other styles
9

Zubík, Tomáš. "Vyhotovení mapových podkladů areálu Metra v Blansku - jižní část." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2019. http://www.nusl.cz/ntk/nusl-400183.

Full text
Abstract:
The diploma thesis deals with planimetric and altimetry determination of the area Metro company in Blansko , its southern part. The content of the thesis is a detailed description of the schedule, survey section, calculations, graphic processing in the GEOSTORE V6® program, description information connection. The result is a printed 1: 250 scale maps in the S-JTSK coordinate system and the Bpv elevation system.
APA, Harvard, Vancouver, ISO, and other styles
10

Slabotinský, Filip. "Využití fotogrametrie v oboru znalectví ve stavebnictví a oceňování nemovitostí." Master's thesis, Vysoké učení technické v Brně. Ústav soudního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-233118.

Full text
Abstract:
The task of this diploma thesis is to design and test the optimal procedures for taking photos to build a 3D model of a civic building using the programme PHOTOMODELER. Then to determine the specific dimensions of the civic building and compare them with the dimensions received with the help of the basic method of measurement in common building practice, i.e. the method of cross directions (using a tape or a telescopic measuring rod) and the geodetic method of measurement. After that to evaluate these measurements and make the conclusion concerning the accuracy or inaccuracy of measurements received with the help of the 3D model of the compiled programme PHOTOMODELER.
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography