Relevant bibliographies by topics / Mg-Al2O3 Nanocomposite

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Book chapters

Academic literature on the topic 'Mg-Al2O3 Nanocomposite'

Author: Grafiati
Published: 28 May 2022
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Mg-Al2O3 Nanocomposite.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Mg-Al2O3 Nanocomposite"

1

Nik Yusoff, Nik Raihan, Aisyah Zahirah Roslee, Rozidaini Mohd Ghazi, Musfiroh Jani, and Nik Nurul Anis Nik Yusoff. "Photocatalytic degradation of glyphosate using TiO2/Al2O3/CNT." BIO Web of Conferences 73 (2023): 05025. http://dx.doi.org/10.1051/bioconf/20237305025.

Full text
Abstract:
Excessive use of glyphosate in agriculture has a negative impact on the environment because it causes runoff, which affects water sources and causes pollution. Advanced Oxidation Process (AOP) is the method for resolving water contamination concerns, and photocatalytic degradation using TiO2/Al2O3/CNT nanocomposites has been observed to be a reliable solution for degrading glyphosate. The photocatalyst of TiO2/Al2O3/CNT nanocomposite was prepared using various ratios which were 70:20:10, 70:29:1 and 70:30:0. These photocatalysts TiO2/Al2O3/CNT were prepared using hydrothermal process. The prep
APA, Harvard, Vancouver, ISO, and other styles
2

Adam, Fatima A. "Influence of Doping-Ion-Type on the Characteristics of Al2O3-Based Nanocomposites and Their Capabilities of Removing Indigo Carmine from Water." Inorganics 10, no. 9 (2022): 144. http://dx.doi.org/10.3390/inorganics10090144.

Full text
Abstract:
Globally, the continuous contamination of natural water resources is a severe issue, and looking for a solution for such a massive problem should be the researcher’s concern. Herein, Al2O3, Al2O3-CuO, Al2O3-NiO, and Al2O3-CoO were prepared via a simple and fast route, utilizing glucose as a capping material. All synthesis conditions were uniform to make the fabricated nanomaterials’ characteristics exclusively influenced by only the ion type. The SEM analysis showed that the particles of the synthesized Al2O3, Al2O3-CuO, Al2O3-NiO, and Al2O3-CoO were all less than 25 nm. The Al2O3-NiO showed t
APA, Harvard, Vancouver, ISO, and other styles
3

Hassan, S. F., M. J. Tan, and M. Gupta. "High-temperature tensile properties of Mg/Al2O3 nanocomposite." Materials Science and Engineering: A 486, no. 1-2 (2008): 56–62. http://dx.doi.org/10.1016/j.msea.2007.08.045.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Bui Thi Le, Thuy. "Synthesis and application of reducing graphene oxide based nanocomposite materials to improve the solar thermal absorption efficiency for distilling saline water into fresh water." Vietnam Journal of Catalysis and Adsorption 9, no. 1 (2020): 39–46. http://dx.doi.org/10.51316/jca.2020.007.

Full text
Abstract:
This work presents the preparation and characterization of some nanocomposite materials based on reduced graphene oxide (rGO) (Al2O3/rGO, Fe3O4/rGO, Fe3O4–Al2O3/rGO). Thermal sorption ability of prepared nanocomposite materials in salty water were measured. Results showed that all investigated materials that were dispersed in salty water raised the thermal absorption ability of solutions. Fe3O4-Al2O3/rGO gived the highest thermal absorption efficiency (the temperature difference between the blank sample and the sample containing Fe3O4-Al2O3/rGO with content of 0.5 mg/mL is 8°C). The thermal so
APA, Harvard, Vancouver, ISO, and other styles
5

Zulfia, Anne, J. Salahuddin, and Hafeizh E. Ahmad. "Characterization of Al-Si-Mg/Al2O3 Nanocomposite Produced by Stir Casting Method." Materials Science Forum 827 (August 2015): 294–99. http://dx.doi.org/10.4028/www.scientific.net/msf.827.294.

Full text
Abstract:
Al-Si-Mg reinforced with Al2O3 nano particles have been made by stir casting method. The vortex produced by stirrer is to distribute the Al2O3 nano particles in the molten aluminium. The volume fraction of Al2O3 nano particles was varied from 0.5, 1, 2, 3, to 5 Vf%, while the addition of magnesium was 3 Vf% as wetting agent to improve the wettability between Al2O3 nano particle and Al-Si-Mg matrix. The effect of Al2O3 on characteristic of Al-Si-Mg composites was studied. It is found that the presence of Al2O3nano particle led to significant improve in mechanical properties, especially at addit
APA, Harvard, Vancouver, ISO, and other styles
6

Khethier Abbass, Muna, and Bassma Finner Sultan. "EFFECT OF AL2O3 NANOPARTICLES ON CORROSION BEHAVIOR OF ALUIMNUM ALLOY (AL-4.5 WT% CU-1.5 WT% MG) FABRICATED BY POWDER METALLURGY." Engineering Structures and Technologies 11, no. 1 (2019): 25–31. http://dx.doi.org/10.3846/est.2019.8860.

Full text
Abstract:
In this research the effect of Al2O3 nanoparticles on corrosion behavior of aluminum base alloy (Al-4.5 wt% Cu-1.5 wt% Mg) has been investigated. Nanocomopsites reinforced with variable contents of 1, 3 and 5 wt% of Al2O3 nanoparticles were fabricated using powder metallurgy. All samples were prepared from the base alloy powders under the best powder metallurgy processing conditions of 6 hr of mixing time, 450 MPa of compaction pressure and 560 °C of sintering temperature. Density and micro hardness measurements, and electrochemical corrosion tests are performed for all prepared samples in 3.5
APA, Harvard, Vancouver, ISO, and other styles
7

Alkallas, Fatemah H., Hoda A. Ahmed, Tahani A. Alrebdi, et al. "Removal of Ni(II) Ions by Poly(Vinyl Alcohol)/Al2O3 Nanocomposite Film via Laser Ablation in Liquid." Membranes 12, no. 7 (2022): 660. http://dx.doi.org/10.3390/membranes12070660.

Full text
Abstract:
Al2O3-poly(vinyl alcohol) nanocomposite (Al2O3-PVA nanocomposite) was generated in a single step using an eco-friendly method based on the pulsed laser ablation approach immersed in PVA solution to be applicable for the removal of Ni(II) from aqueous solution, followed by making a physicochemical characterization by SEM, XRD, FT-IR, and EDX. After that, the effect of adsorption parameters, such as pH, contact time, initial concentration of Ni(II), and medium temperature, were investigated for removal Ni(II) ions. The results showed that the adsorption was increased when pH was 5.3, and the pro
APA, Harvard, Vancouver, ISO, and other styles
8

Daniel, Shetha, Nilotpal Banerjee, Manik Majumder, and Sudhir Chitrapady Vishweshwara. "Effect of Mg on Al-Mg Alloy and Electroless Ni-P Codeposition of nano-Al2O3: Mechanical, Wear, and Corrosion Resistance Properties." Trends in Sciences 20, no. 10 (2023): 6793. http://dx.doi.org/10.48048/tis.2023.6793.

Full text
Abstract:
The addition of magnesium to Aluminum alloys has become increasingly popular due to their lightweight, high strength, and corrosion resistance properties. Our research on high-content Mg doped 90, Al-10 wt% Mg alloy has shown that coating it with electroless Ni-P and codepositing nano-Al2O3 (0, 2.5, 5 and 7.5 wt%) can significantly improve its mechanical properties, resistance to wear & tear, and even corrosion resistance. The electroless Ni-P-5 wt% Al2O3 composite displayed a wear rate of 0.65×10−3 g/m at 12 N, a microhardness value of 598 HV, and remarkable thermal shock resistance. A st
APA, Harvard, Vancouver, ISO, and other styles
9

Bharathi, M. L., S. Adarsh Rag, L. Chitra, et al. "Investigation on Wear Characteristics of AZ91D/Nanoalumina Composites." Journal of Nanomaterials 2022 (February 18, 2022): 1–9. http://dx.doi.org/10.1155/2022/2158516.

Full text
Abstract:
This paper discusses the wear and friction with the 2 W% Al2O3 nanocomposite content of pure Mg and AZ91D Mg alloys. Sliding speeds of 0.5 and 1.5 m/s in cast materials with normal stress conditions have been used in sliding distances up to 2000 m/s (0.5, 1.0, and 1 MPa). In order to evaluate the work hardness of the materials measured on temperature similar to the contact surface, we used hardness patterns and hot-compression flow curves. Mg and AZ91D magnesium alloy pure monolithic Mg are low wear resistant due to an increase in contact temperature due to the adjustment of working conditions
APA, Harvard, Vancouver, ISO, and other styles
10

Wagih, A. "Mechanical properties of Al–Mg/Al2O3 nanocomposite powder produced by mechanical alloying." Advanced Powder Technology 26, no. 1 (2015): 253–58. http://dx.doi.org/10.1016/j.apt.2014.10.005.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Mg-Al2O3 Nanocomposite"

1

Amirjan, M., H. Khorsand, and H. Abdoos. "Investigation of Manufacturing Parameters on the Mechanical Properties of Powder Metallurgy Magnesium Matrix Nanocomposite by Artificial Neural Networks." Thesis, Sumy State University, 2012. http://essuir.sumdu.edu.ua/handle/123456789/35119.

Full text
Abstract:
In present study, Artificial Neural Network (ANN) approach to prediction of the ODS Magnesium matrix composite mechanical properties obtained was used. Several composition of Mg- Al2O3 composites with four different amount of Al2O3 reinforcement with four different size of nanometer to micrometer were produced in different sintering times. The specimens were characterized using metallographic observation, microhardness and strength (UTS) measurements. Then, for modeling and prediction of mentioned conditions, a multi layer perceptron back propagation feed forward neural network was constr
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Mg-Al2O3 Nanocomposite"

1

Chandra Kandpal, Bhaskar, Gaurav Sharma, Nitin Johri, Natraj Mishra, and Ajay Kumar. "Evaluation of mechanical properties of Mg/CNT/Al2O3 -based metal matrix nanocomposites using stir casting process." In Composites. CRC Press, 2024. https://doi.org/10.1201/9781003564355-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Mg-Al2O3 Nanocomposite' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography