Relevant bibliographies by topics / Micro-arc oxidation coatings

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Book chapters
  4. Conference papers
  5. Reports

Academic literature on the topic 'Micro-arc oxidation coatings'

Author: Grafiati
Published: 3 June 2025
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Micro-arc oxidation coatings.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Micro-arc oxidation coatings"

1

Chen, Yue Liang, Yong Zhang, Yan Li, and Tai Feng Zhang. "Influences of Micro-Arc Oxidation on Pre-Corroded Fatigue Property of Magnesium Alloy AZ91D." Advanced Materials Research 152-153 (October 2010): 51–57. http://dx.doi.org/10.4028/www.scientific.net/amr.152-153.51.

Full text
Abstract:
The surface morphologies of micro-arc oxidation coatings and chemical oxidation coating formed on AZ91D alloy were observed by scanning electron microscopy. The fatigue properties of both specimens with micro-arc oxidation coatings and chemical oxidation coating after the pre-corroded treatments in neutral salt spray test were investigated comparatively. The result shows that pre-corrosion treatment decreases the fatigue life, but the pre-corroded fatigue life of specimens with chemical oxidation is lower than that with micro-arc oxidation. The thickness of micro-arc oxidation coatings has no
APA, Harvard, Vancouver, ISO, and other styles
2

Zhu, Li Hua, Xiao Jing Xu, Xiao Ya Niu, Ting Zhuo Chen, and Min Liu. "Surface Properties of TiNi Alloy Treated by Micro-Arc Oxidation under Different Voltages." Advanced Materials Research 1053 (October 2014): 21–29. http://dx.doi.org/10.4028/www.scientific.net/amr.1053.21.

Full text
Abstract:
The effects of micro-arc oxidation (MAO) voltage (370V, 400V, 420V) on the surface morphology, adhesion of film/substrate, corrosion resistance and fretting friction and wear properties after micro-arc oxidation and heat-treatment for 48h of TiNi alloy were investigated. The results show that, as the voltage gradually increases: (1) micro-arc oxidation coatings form, when the voltage increase to 420V, the coating shows a significant micro-arc oxidized porous characteristics; (2) the Ca/P ratio in the coatings also increases, so the Ca/P ratio can be controlled by adjusting the voltage of micro
APA, Harvard, Vancouver, ISO, and other styles
3

Safa Yilmaz, Mustafa, Gökhan Özer, Orhan Şahin, and Ahmet Karaaslan. "Micro Arc Oxidation Coating Parameter-Property Relationship." Materials Performance 60, no. 1 (2021): 40–44. https://doi.org/10.5006/mp2021_60_1-40.

Full text
Abstract:
Micro arc oxidation coatings were produced on AA7075 (UNS A97075) substrates using various process parameters. The study aimed to improve the surface characteristics of the alloy. Thickness, hardness, and roughness measurements characterized the coatings. It was revealed that the coating thickness was directly related to the coating roughness. Various aluminum oxide (Al2O3) phases were detected in the coatings, and phase density differences were determined. Variations in the hardness of the coatings depended on the phase distribution, porosity, and presence of microcracks. Scanning electron mi
APA, Harvard, Vancouver, ISO, and other styles
4

Wu, Pei Nian, J. J. Xi, Jun Zhao, and T. J. Wang. "Preparation of Compact Micro-Arc Oxidation Coatings on Aluminum Alloys." Applied Mechanics and Materials 33 (October 2010): 492–95. http://dx.doi.org/10.4028/www.scientific.net/amm.33.492.

Full text
Abstract:
In this paper, a hard and thin coating with no loose layer was formed on the surface of the aluminum LC4 by bipolar micro-arc oxidation power, and the influence of ratio J of the negative current density to the positive current density on the thickness h and the hardness H of micro-arc oxidation coatings was studied. By SEM and other modern materials testing and analyzing techniques, the microstructures of the micro-arc oxidation ceramic coatings were tested and analyzed. It was showed that the micro-structure is compact, and the ceramic coating almost has non-porous layer.
APA, Harvard, Vancouver, ISO, and other styles
5

Yin, Yu Jun, Shu Hua Li, Da Wei Shen, Yuan Yuan Zu, and Chang Zheng Qu. "Effects of Al2O3 Nanoparticles on Microstructure and Performance of Ceramic Coatings by Micro-Arc Oxidation." Key Engineering Materials 537 (January 2013): 92–96. http://dx.doi.org/10.4028/www.scientific.net/kem.537.92.

Full text
Abstract:
A dense ceramic oxide coating approximately 45 µm thick was prepared on a Ly12 aluminum alloy by micro-arc oxidation in an alkali-phosphate electrolytic solution. Coating thickness and surface roughness (Ra) were measured after the coating had been synthesized. The effects of Al2O3 Nanoparticles in electrolyte on phase composition, microstructure and microhardness of the micro-arc oxidation ceramic coatings on Ly12 aluminum alloy were investigated by means of XRD, SEM and hardness experimentation. The results show that the ceramic coatings become more dense and its microhardness increased by a
APA, Harvard, Vancouver, ISO, and other styles
6

Xie, Nian Suo, and Jin Wang. "Study on Properties of Al2TiO5 Coating on Ti-6Al-4V Titanium Alloy." Key Engineering Materials 575-576 (September 2013): 348–51. http://dx.doi.org/10.4028/www.scientific.net/kem.575-576.348.

Full text
Abstract:
The Al2TiO5Coating was deposited on Ti-6Al-4V alloy substrate by homemade micro-arc oxidation system. The microstructure of Ti-6Al-4V titanium alloy, the phase of coating, the bonding force of the coating and matrix, sulfuric acid corrosion resistance and high-temperature oxidation resistance were study by inverted microscope model, Xray diffract meter, scanning electron microscopy, the coating adhesion automatic scratch tester, box-type furnace. The results show that the phase of coating is composed of Al2TiO5and Al2SiO5, and Al2TiO5.is the main component, the coating surface consists of disc
APA, Harvard, Vancouver, ISO, and other styles
7

Xi, Jian Jun, Jun Zhao, and Guo Jun Niu. "Preparation and Performance of Micro-Arc Oxidation Ceramic Coating of Titanium Alloy in Low Current Density." Advanced Materials Research 335-336 (September 2011): 708–12. http://dx.doi.org/10.4028/www.scientific.net/amr.335-336.708.

Full text
Abstract:
In this paper, Three types of electrolyte (phosphate, silicate, aluminum) are considered to make preparation for micro-arc oxidation coatings on titanium alloy by bipolar pulse MAO oxidation power with low power consumption (density of current less than 1A/dm2). Treated by micro-arc oxidation, dense micro-arc oxidation ceramic coating is formed on titanium alloy. Surface morphology and friction coefficient of MAO coating is analyzed. The research on the effect of NaF on ablation of MAO coating is prepared, which guides the configuration of the electrolyte later.
APA, Harvard, Vancouver, ISO, and other styles
8

Lu, Kai, Xiang Dong Liu, Ya Ping Zhang, and Wan Zhong Gao. "Effects of C6H8O7 and C3H8O3 in the Na2SiO3 Electrolyte on Characteristics of Coating Formed on ZAlSi12Cu2Mg1 by Micro-Arc Oxidation." Applied Mechanics and Materials 217-219 (November 2012): 1327–30. http://dx.doi.org/10.4028/www.scientific.net/amm.217-219.1327.

Full text
Abstract:
Micro-arc oxidation coating on ZAlSi12Cu2Mg1 alloy were prepared in Na2SiO3 electrolyte, effects of C6H8O7 and C3H8O3 as additive on resistances of micro-arc oxidation coatings were investigated. Results show that coatings containing completest ceramic particles were obtained on alloys surface processed in electrolyte solution including 2.0 g/L C6H8O7 additive, the size of micro-arc wholes becomes larger with more C6H8O7, and it has improved with 1ml/L C3H8O3 in the solution. The results of XRD analysis indicates that the coatings are mainly composed of alumina and mullite. EDS analysis showed
APA, Harvard, Vancouver, ISO, and other styles
9

Bayandinova, Moldir, Aidar Kenesbekov, Aynur Serikbaykyzy, Arnur Askhatov, Yelaman Batanov, and Nuraly Bazarov. "Development of biocompatible coatings for orthopedic joint implants." Physical Sciences and Technology 12, no. 1-2 (2025): 84–94. https://doi.org/10.26577/phst20251218.

Full text
Abstract:
This article presents both theoretical and experimental approaches to the development of biocompatible coatings based on hydroxyapatite modified with titanium dioxide for orthopedic implants made from Ti 13Nb-13Zr titanium alloy. The primary objective was to enhance the adhesion, mechanical strength and antibacterial properties of the coatings by employing a combined technique: micro-arc oxidation followed by gas-thermal spraying. The influence of electrolyte composition and micro-arc oxidation parameters on the coating’s morphology, surface roughness and adhesion strength were systematically
APA, Harvard, Vancouver, ISO, and other styles
10

Zheng, Shun Qi, Li Ping Zhu, Gui Ru Chang, Chuang Lu, and Xiao Jing Li. "Performance of Ceramic Coating of MB3 Magnesium Alloy by Micro-Arc Oxidation." Advanced Materials Research 571 (September 2012): 38–42. http://dx.doi.org/10.4028/www.scientific.net/amr.571.38.

Full text
Abstract:
Micro-arc oxidation (MAO) method was used for the surface modification of MB3 magnesium alloy. The morphology feature, phase composition, and chemical composition of the formed ceramic coatings were studied by metallographic microscope, scanning electron microscopy (SEM), XRD, respectively. Drop test has been applied to study the corrosion resistance of MB3 Mg alloy with and without micro-arc oxidation treatment. The present result indicates that, through MAO, ceramic coatings were in-situ fabricated on the surface of MB3 Mg alloy, the micro-arc oxidation coating is relatively dense and unifor
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Micro-arc oxidation coatings"

1

Погребняк, Олександр Дмитрович, Александр Дмитриевич Погребняк, Oleksandr Dmytrovych Pohrebniak, et al. "Structure, Properties and Element Composition of Alumina Coatings, Obtained by Micro-Arc Oxidation Method." Thesis, Sumy State University, 2012. http://essuir.sumdu.edu.ua/handle/123456789/34914.

Full text
Abstract:
Coatings of aluminium oxide Al2O3 were obtained by micro-arc oxidation under different conditions of deposition. They were analysed by such methods as: positron annihilation spectroscopy (PAS), Rutherford backscattering (RBS), X-ray diffraction (XRD) and scanning electron microscopy with microanalysis (SEM with EDS). Investigated samples showed good adhesion to the substrate, low concentration of nanopores in the bulk. Content of amorphous phase in the coating was about 20 vol.%, and metastable -Al2O3 - Al2O3 phases about less than 10 vol.%. It was demonstrated that by varying of paramete
APA, Harvard, Vancouver, ISO, and other styles
2

Ibrahim, Hamdy Ibrahim. "Bioresorbable Magnesium-Based Bone Fixation Hardware: Alloy Design, Post-Fabrication Heat Treatment, Coating, and Modeling." University of Toledo / OhioLINK, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=toledo1503678544356525.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Marques, Isabella da Silva Vieira 1986. "Filmes bioativos produzidos em superfícies de titânio por meio da técnica de oxidação por micro-arcos para aplicações odontológicas = análises de corrosão, tribocorrosão e respostas biológicas = Bioactive coatings produced on titanium surfaces by micro-arc oxidation for dental applications : corrosion, tribocorrosion and biological responses." [s.n.], 2015. http://repositorio.unicamp.br/jspui/handle/REPOSIP/290198.

Full text
Abstract:
Orientadores: Valentim Adelino Ricardo Barão, Marcelo Ferraz Mesquita<br>Tese (doutorado) - Universidade Estadual de Campinas, Faculdade de Odontologia de Piracicaba<br>Made available in DSpace on 2018-08-28T12:24:30Z (GMT). No. of bitstreams: 1 Marques_IsabelladaSilvaVieira_D.pdf: 24629139 bytes, checksum: 93af53e93902515d3f0381ed77a7414c (MD5) Previous issue date: 2015<br>Resumo: O titânio (Ti) e suas ligas são comumente utilizados em aplicações odontológicas. Na cavidade bucal, os implantes dentários são submetidos a tribocorrosão (interação sinérgica entre desgaste e corrosão), o que pod
APA, Harvard, Vancouver, ISO, and other styles
4

Dehghanghadikolaei, Amir. "Enhance its Corrosion Behavior of Additively Manufactured NiTi by Micro-Arc Oxidation Coating." University of Toledo / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=toledo1525475381922659.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Роп'як, Любомир Ярославович. "Науково-технологічні основи виготовлення деталей та складання виробів, зміцнюваних мікродуговим оксидуванням алюмінієвого шару". Thesis, Івано-Франківський національний технічний університет нафти і газу, 2018. http://repository.kpi.kharkov.ua/handle/KhPI-Press/38356.

Full text
Abstract:
Дисертація на здобуття наукового ступеня доктора технічних наук за спеціальністю 05.02.08 – технологія машинобудування. – Національний технічний університет "Харківський політехнічний інститут". – Харків, 2018. У дисертаційній роботі вирішена актуальна науково-технічна проблема в об-ласті технології машинобудування: розроблено теоретичні основи та технологічні засоби для підвищення ресурсу роботи нафтогазового обладнання шляхом мікродугового оксидування поверхневого алюмінієвого шару деталей машин. Досліджено напружений стан двошарового покриття під довільно орієнтованим локальним навантажен
APA, Harvard, Vancouver, ISO, and other styles
6

Роп'як, Любомир Ярославович. "Науково-технологічні основи виготовлення деталей та складання виробів, зміцнюваних мікродуговим оксидуванням алюмінієвого шару". Thesis, НТУ "ХПІ", 2018. http://repository.kpi.kharkov.ua/handle/KhPI-Press/38291.

Full text
Abstract:
Дисертація на здобуття наукового ступеня доктора технічних наук за спеціальністю 05.02.08 – технологія машинобудування. – Національний технічний університет "Харківський політехнічний інститут". – Харків, 2018. У дисертаційній роботі вирішена актуальна науково-технічна проблема в області технології машинобудування: розроблено теоретичні основи та технологічні засоби для підвищення ресурсу роботи нафтогазового обладнання шляхом мікро-дугового оксидування поверхневого алюмінієвого шару деталей машин. Досліджено напружений стан двошарового покриття під довільно орієнтованим локальним навантаженн
APA, Harvard, Vancouver, ISO, and other styles
7

Lu, Jia-Rong, and 盧珈融. "Preparation of bioceramic coatings on pure titanium by micro-arc oxidation." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/885h5y.

Full text
Abstract:
碩士<br>大同大學<br>材料工程學系(所)<br>102<br>Ceramic coatings containing hydroxyapatite (HA) were prepared on pure titanium using microarc oxidation (MAO) in aqueous solutions containing calcium acetate monohydrate (Ca(CH3COO)2. H2O) and monocalcium phosphate monohydrate (Ca(H2PO4)2. H2O). With home-made power supply, the constant or linear increase in the MAO voltage of pulsed power will be employed. This research was arranged by two steps. First step was focused on the effect of constant and linear increase in applied voltage on the properties of ceramic coatings on pure titanium by bipolar pulse micro
APA, Harvard, Vancouver, ISO, and other styles
8

Yu-ChiLi and 李友吉. "Porous Coatings Incorporating Strontium on Biomedical Tantalum Through Micro-Arc Oxidation." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/3mew84.

Full text
Abstract:
碩士<br>國立成功大學<br>製造資訊與系統研究所<br>102<br>Containing Sr-Ca-P (Strontium Calcium phosphorus) ceramics layer were bioactive materials. We used micro-arc oxidation (MAO) to manufacture Ta2O5 with Sr-Ca-P porous coatings on tantalum substrates. The aim of this study was to fabricate porous Sr-Ca-P-containing coatings on the tantalum surface using the MAO technique and evaluate the coatings topography, phase, chemical composition and cell response. We used different instruments to investigate the coatings, including X-ray diffraction, FE-SEM and EDS. The micro-arc oxidation were not begin to reaction at
APA, Harvard, Vancouver, ISO, and other styles
9

Tsai, Yuan-Chih, and 蔡元智. "Enhancement of anticorrosion protection on magnesium alloy AZ91D through micro arc oxidation coatings and their duplex coatings." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/7d36wg.

Full text
Abstract:
碩士<br>國立臺灣科技大學<br>化學工程系<br>106<br>Micro arc oxidation (MAO) is one of the surface coating technologies, suitable for passivating the lightweight metal surfaces of aluminum, magnesium, and titanium. Various plasma enhanced reactions between substrate and electrolyte by microdischarges are activated under high voltage during micro-arc oxidation. The coating, obtained from the oxidized metal substrate, has unique properties of strong adhesion, wear, and corrosion resistance. However, the surface of the micro-arc oxide coating is also porous, and the etching species, such as chlorine anions, invad
APA, Harvard, Vancouver, ISO, and other styles
10

Cheng-ChungHsu and 徐政忠. "The Effect of Titanium Implants with Micro-arc Oxidation Coatings on Osseointegration in Rabbits." Thesis, 2013. http://ndltd.ncl.edu.tw/handle/91387333121763168447.

Full text
Abstract:
碩士<br>國立成功大學<br>口腔醫學研究所<br>101<br>Today, the use of dental implants has become a common treatment procedure in the replacement of missing teeth. The key of the success of dental implant is the establishment of osseointegration between implant surface and surrounding alveolar bone. The design, chemical composition and topography of the implant surface can influence the extent of osseointegration. Many literatures show that SLA(Sandblasted, Large grit, Acid-etched) surface improved osseointegration with a high percentage of bone-implant contact and high removal torque values. Strontium (Sr), whi
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Micro-arc oxidation coatings"

1

Narayanan, T. S. N. Sankara, and K. Ravichandran. "Electrochemical Anodic Oxidation/Micro-Arc Oxidation-Based Composite Coatings." In Advances in Corrosion Control of Magnesium and its Alloys. CRC Press, 2023. http://dx.doi.org/10.1201/9781003319856-17.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Nan, Kai Hui, and G. X. Pei. "Mineralization Behavior of Bioactive Ceramic Coatings Formed by Micro-Arc Oxidation on Titanium." In Key Engineering Materials. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-422-7.629.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Abbasi, Sakine, Hamid Reza Rezaie, and Farhad Golestani-Fard. "Microstructure and Properties of Nanostructured Calcium Phosphate/Titania Porous Coatings via Micro Arc Oxidation." In Advanced Structured Materials. Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-31470-4_17.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Zhang, Pengfei, Shufang Yan, Shijiang Li, Yanhua Geng, and Weidong Chen. "Ceramic Coatings Formed on the Surface of ZrH1.8 by Micro-arc Oxidation in Aluminate System." In Springer Proceedings in Energy. Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-0158-2_20.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Mu, Weiyi, Zhengxian Li, Jihong Du, Ruixue Luo, and Zhengping Xi. "Effects of Oxidation Time on Micro-arc Oxidized Coatings of Magnesium Alloy AZ91D in Aluminate Solution." In Magnesium Technology 2011. Springer International Publishing, 2011. http://dx.doi.org/10.1007/978-3-319-48223-1_99.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Hao, Guo Dong, Yong Liang Guo, Xin Mei Zhang, Gang Liu, and Zhao Hua Jiang. "Preparation of Ceramic Composite Coatings on Ti-6Al-4V Alloy by Surface Nanocrystallization/Micro-Arc Oxidation." In High-Performance Ceramics V. Trans Tech Publications Ltd., 2008. http://dx.doi.org/10.4028/0-87849-473-1.1322.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Mu, Weiyi, Zhengxian Li, Jihong Du, Ruixue Luo, and Zhengping Xi. "Effects of Oxidation Time on Micro-arc Oxidized Coatings of Magnesium Alloy AZ91D in Aluminate Solution." In Magnesium Technology 2011. John Wiley & Sons, Inc., 2011. http://dx.doi.org/10.1002/9781118062029.ch99.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Chen, Xiaowen, Yu Tang, DeFen Zhang, et al. "Effect of Current Density on the Structure and Properties of Micro-arc Oxidation Coatings on Titanium Alloy Drill Pipe." In Springer Proceedings in Energy. Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-0158-2_35.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Zhao, Wan Sheng, T. Z. Xin, Zhen Long Wang, and J. C. Liu. "Research on Properties and Formation Mechanism of Ceramic Coatings Prepared by Micro-Arc Oxidation on 2024 Aluminum Alloy Surface." In Advances in Machining & Manufacturing Technology VIII. Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-999-7.259.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Nie, Rong Rong, Feng Zhu, Li Ru Shen, et al. "Structure and In Vitro Bioactivity of Si Enriched Hydroxyapatite/TiO2 Coatings on Pure Titanium by Micro-Arc Oxidation." In Key Engineering Materials. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-410-3.1596.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Micro-arc oxidation coatings"

1

Fedorov, Vladimir Sergeevich, Marina Valeryevna Chizhevskaya, Oksana Alexandrovna Golubtsova, and Alexey Vasilyevich Girn. "Electrolyte-induced transformations during micro-arc oxidation of aluminum alloys: toward functional oxide coatings for optical industry applications." In Fourth International Conference on Digital Technologies, Optics, and Materials Science (DTIEE 2025), edited by Arthur Gibadullin and Khamza Eshankulov. SPIE, 2025. https://doi.org/10.1117/12.3072582.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Zhang, Xiuping, Lei Li, Yaozhao Mu, Yanxiang Xie, Jun Dai, and Jing Shi. "Enhancing Conductivity and Corrosion Resistance by Organic Coatings on AZ31 Magnesium Alloy Treated by Micro-Arc Oxidation." In ASME 2019 14th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/msec2019-2894.

Full text
Abstract:
Abstract In this study, an organic coating, in combination of a micro-arc oxidation ceramic layer, was prepared on the surface of a magnesium alloy (AZ31) to achieve both functions of corrosion resistance and electrical conductivity. By using carbon black as conductive particles and epoxy resin as matrix, organic coatings of various weight fractions were applied on the AZ31 surface treated by micro-arc oxidation through adjusting the contents of the conductive particles and non-conductive matrix. Electrical conductivity and corrosion resistance of organic coatings were measured. The results sh
APA, Harvard, Vancouver, ISO, and other styles
3

Song enjun and Hui-dong Su. "Photoelectrocatalytic degradation of rhodamineB of TiO2 coatings using micro-arc oxidation." In 2011 International Conference on Electric Technology and Civil Engineering (ICETCE). IEEE, 2011. http://dx.doi.org/10.1109/icetce.2011.5774425.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Maj, Lukasz, Faiz Muhaffel, Anna Jarzebska, et al. "Microstructure Characterization of Titania-Based Micro-Arc Oxidation Coatings with Nanoparticles." In IOCN 2023. MDPI, 2023. http://dx.doi.org/10.3390/iocn2023-14535.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Dawood, Nawal Mohammed, and Ayad Mohammed Nattah. "Corrosion reduction of aluminum alloy 6061 via micro arc oxidation coatings." In 4TH INTERNATIONAL SCIENTIFIC CONFERENCE OF ENGINEERING SCIENCES AND ADVANCES TECHNOLOGIES. AIP Publishing, 2023. http://dx.doi.org/10.1063/5.0156908.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Kazantseva, E. A., E. G. Komarova, and Yu P. Sharkeev. "Structural and morphological features of the ultrasound-assisted micro-arc oxidation coatings." In PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS WITH HIERARCHICAL STRUCTURE FOR NEW TECHNOLOGIES AND RELIABLE STRUCTURES 2019. AIP Publishing, 2019. http://dx.doi.org/10.1063/1.5132023.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Muqin Li, Dechao Li, Lijie Qu, Aiqin Zhang, and Erlin Zhang. "Study on Ag bio-coatings on titanium alloy by ultrasonic auxiliary micro-arc oxidation." In 2011 6th International Forum on Strategic Technology (IFOST). IEEE, 2011. http://dx.doi.org/10.1109/ifost.2011.6021002.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Singh, Jashanpreet, Abdul Wahab Hashmi, Ajay Kumar, Namrata Dogra, Parveen Kumar, and Ram Vilas Meena. "Review on protection of Mg alloys bioimplants by deposition of micro-arc oxidation coatings." In PROCEEDINGS OF THE 1ST INTERNATIONAL CONFERENCE ON ARTIFICIAL INTELLIGENCE, ADVANCED MATERIALS, AND MECHATRONICS SYSTEMS: AIAMMS2023. AIP Publishing, 2024. https://doi.org/10.1063/5.0234600.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Xue, Yuna, Xin Pang, Bailing Jiang, and Hamid Jahed. "Corrosion Performances Of Micro-Arc Oxidation Coatings On Az31B, Az80 And Zk60 Cast Mg Alloys." In Canadian Society for Mechanical Engineering (CSME) International Congress 2018. York University Libraries, 2018. http://dx.doi.org/10.25071/10315/35419.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Chebodaeva, V. V., M. B. Sedelnikova, M. I. Lerner, A. V. Pervikov, and Yu P. Sharkeev. "Structure and properties of CaP coatings formed by micro-arc oxidation and modified by ZnO nanoparticles." In PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON PHYSICAL MESOMECHANICS. MATERIALS WITH MULTILEVEL HIERARCHICAL STRUCTURE AND INTELLIGENT MANUFACTURING TECHNOLOGY. AIP Publishing, 2020. http://dx.doi.org/10.1063/5.0034120.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Micro-arc oxidation coatings"

1

Komarova, Ekaterina, Ekaterina Kazantseva, Elizaveta Akimova, and Margarita Khimich. Effect of micro-arc oxidation voltage and duration on the morphology, phase structure, chemical composition of calcium phosphate coatings. Peeref, 2023. http://dx.doi.org/10.54985/peeref.2306p2985848.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Micro-arc oxidation coatings' for particular source types:
Journal articles Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography