Log in

Relevant bibliographies by topics / Micro-channel heat exchanger / Journal articles

To see the other types of publications on this topic, follow the link: Micro-channel heat exchanger.

Journal articles on the topic 'Micro-channel heat exchanger'

Author: Grafiati

Published: 4 June 2021

Last updated: 15 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Micro-channel heat exchanger.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Aravelli, Aparna, Singiresu S. Rao, and Hari K. Adluru. "Design Optimization of Micro-channel Heat Exchanger embedded in LTCC." International Symposium on Microelectronics 2012, no. 1 (2012): 000857–65. http://dx.doi.org/10.4071/isom-2012-wp33.

Full text

Abstract:

Increase in the density of electronic packaging leads to the investigation of highly efficient thermal management systems. The challenge in these micro-systems is to maximize heat transfer per unit volume. In the author's previous work, experimental and computational analysis has been performed on LTCC substrates using embedded silver vias. This novel technique of embedding silver vias along with forced convection resulted in higher heat transfer rates. The present work further investigates into the optimization of this model. A Multi-objective optimization problem has been formulated for the

APA, Harvard, Vancouver, ISO, and other styles

2

Son, Taek Joon, and Young Shin Lee. "A Study on the Strength under Pressure of Micro Heat Exchanger." Key Engineering Materials 326-328 (December 2006): 265–68. http://dx.doi.org/10.4028/www.scientific.net/kem.326-328.265.

Full text

Abstract:

The strength of micro heat exchanger under pressure is studied in this paper. Micro heat exchanger is made with brazing technology. It is constructed of stainless steel thin plates with micro channels and in/out port for fluid flow. Micro channels in thin plates are formed by etching and all parts including thin plates are joined by brazing. The study on the strength under pressure is performed by structural analysis. For structural analysis, one layer of micro heat exchanger body is considered. It is composed of thin plate with micro channel and brazing filler which is used to join thin plate

APA, Harvard, Vancouver, ISO, and other styles

3

Marques, Christophe, and Kevin W. Kelly. "Fabrication and Performance of a Pin Fin Micro Heat Exchanger." Journal of Heat Transfer 126, no. 3 (2004): 434–44. http://dx.doi.org/10.1115/1.1731341.

Full text

Abstract:

Nickel micro pin fin heat exchangers can be electroplated directly onto planar or non-planar metal surfaces using a derivative of the LIGA micromachining process. These heat exchangers offer the potential to more effectively control the temperature of surfaces in high heat flux applications. Of particular interest is the temperature control of gas turbine engine components. The components in the gas turbine engine that require efficient, improved cooling schemes include the gas turbine blades, the stator vanes, the turbine disk, and the combustor liner. Efficient heating of component surfaces

APA, Harvard, Vancouver, ISO, and other styles

4

SOMEYA, Takeshi, Yutaka ABE, and Yutaka SUZUKI. "Characteristics of Heat Transfer and Fluid Flow in Micro-Channel Heat Exchanger." Proceedings of the JSME annual meeting 2004.3 (2004): 285–86. http://dx.doi.org/10.1299/jsmemecjo.2004.3.0_285.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Inoue, Satoshi, Toshimitsu Kamada, and Hirokazu Fujino. "A123 Development of Micro-channel Heat Exchanger for Heat Pump Air Conditioner." Proceedings of the Thermal Engineering Conference 2012 (2012): 13–14. http://dx.doi.org/10.1299/jsmeted.2012.13.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Srisomba, Raviwat, Lazarus Asirvatham, Omid Mahian, Ahmet Dalkılıç, Mohamed Awad, and Somchai Wongwises. "Air-side performance of a micro-channel heat exchanger in wet surface conditions." Thermal Science 21, no. 1 Part A (2017): 375–85. http://dx.doi.org/10.2298/tsci150906227s.

Full text

Abstract:

The effects of operating conditions on the air-side heat transfer, and pressure drop of a micro-channel heat exchanger under wet surface conditions were studied experimentally. The test section was an aluminum micro-channel heat exchanger, consisting of a multi-louvered fin and multi-port mini-channels. Experiments were conducted to study the effects of inlet relative humidity, air frontal velocity, air inlet temperature, and refrigerant temperature on air-side performance. The experimental data were analyzed using the mean enthalpy difference method. The test run was performed at relative air

APA, Harvard, Vancouver, ISO, and other styles

7

Alsultany, Forat H., and Qasim S. Kadhim. "Based on the Matrix of Silicon Nanocrystals a Modeling Study of Thermo-hydraulic Properties of Micro-channel Heat Transfer Elements." NeuroQuantology 19, no. 3 (2021): 38–45. http://dx.doi.org/10.14704/nq.2021.19.3.nq21026.

Full text

Abstract:

The construction of a heat exchange element based on a matrix of silicon whiskers for thermal stabilization systems of miniature heat sources with specific power up to 100 W/cm2 operating over a wide range of ambient temperatures is proposed. Based on the developed mathematical model of convective heat transfer in a microchannel compact heat exchanger with a developed heat exchange surface, numerical simulation of the hydrodynamics and heat transfer processes for various configurations of microchannel insertions was carried out. Fields of pressures, flow velocities, coolant temperatures and ma

APA, Harvard, Vancouver, ISO, and other styles

8

Močnik, Urban, Bogdan Blagojevič, and Simon Muhič. "Numerical Analysis with Experimental Validation of Single-Phase Fluid Flow in a Dimple Pattern Heat Exchanger Channel." Strojniški vestnik – Journal of Mechanical Engineering 66, no. 9 (2020): 544–53. http://dx.doi.org/10.5545/sv-jme.2020.6776.

Full text

Abstract:

A plate heat exchanger with a dimple pattern heat plate has a large number of dimples. The shape of dimples defines the characteristics of the plate heat exchanger. Although such heat exchangers have become increasingly popular due to their beneficial characteristics, knowledge of the flow characteristics in such kind of channel is poor. A good knowledge of the flow conditions inside of such channel is crucial for the successful and efficient development of new products. In this paper single-phase water flow in dimple pattern plate heat exchanger was investigated with application of computatio

APA, Harvard, Vancouver, ISO, and other styles

9

Brignoli, Riccardo, Luca Cecchinato, and Claudio Zilio. "Experimental analysis of an air–water heat pump with micro-channel heat exchanger." Applied Thermal Engineering 50, no. 1 (2013): 1119–30. http://dx.doi.org/10.1016/j.applthermaleng.2012.08.027.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Kang, Shung-Wen, Jong-Shun Chen, and Jong-Yun Hung. "Surface roughness of (110) orientation silicon based micro heat exchanger channel." International Journal of Machine Tools and Manufacture 38, no. 5-6 (1998): 663–68. http://dx.doi.org/10.1016/s0890-6955(97)00115-6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Seo, Seok-Won, Huee-Youl Ye, and Kwan-Soo Lee. "Design of a Micro-Channel Heat Exchanger for Heat Pump Using Approximate Optimization Method." Korean Journal of Air-Conditioning and Refrigeration Engineering 24, no. 3 (2012): 256–64. http://dx.doi.org/10.6110/kjacr.2012.24.3.256.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

SOMEYA, Takeshi, Yutaka ABE, and Yutaka SUZUKI. "The heat transfer flow characteristic evaluation of high pressure-resistant micro-channel heat exchanger." Proceedings of the JSME annual meeting 2003.6 (2003): 321–22. http://dx.doi.org/10.1299/jsmemecjo.2003.6.0_321.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Byrd, Larry, Michael P. Camden, Gene E. Maddux, and Larry W. Simmons. "Random Amplitude Fatigue Life of Electroformed Nickel Micro-Channel Heat Exchanger Coupons." Shock and Vibration 5, no. 2 (1998): 103–10. http://dx.doi.org/10.1155/1998/484108.

Full text

Abstract:

The use of micro-channel heat exchangers (MCHEX) with coolant flow passage diameters less than 1 mm has been proposed for heat flux, weight, or volume limited environments. This paper presents room temperature, random amplitude,ε−N(strain versus number of cycles to failure) curves for MCHEX coupons formed by electroplating nickel on a suitable form. These coupons are unique in two aspects; the microstructure formed by electroplating and the presence of holes as an integral part of the structure. The hole diameters range from approximately 10% to 50% to the specimen thickness. The fatigue life

APA, Harvard, Vancouver, ISO, and other styles

14

Li, Qi, Nathan Guérin de Tourville, Igor Yadroitsev, Xigang Yuan, and Gilles Flamant. "Micro-channel pressurized-air solar receiver based on compact heat exchanger concept." Solar Energy 91 (May 2013): 186–95. http://dx.doi.org/10.1016/j.solener.2013.02.004.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Askar, Serena, Amir Fartaj, Engr Sarbadaman Dasgupta, and Abdul Quayium. "Second law analysis of a multiport serpentine Micro-Channel Slab Heat Exchanger." International Journal of Exergy 10, no. 4 (2012): 379. http://dx.doi.org/10.1504/ijex.2012.047509.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

YAMAMOTO, Kohei, Yutaka ABE, Akiko KANEKO, and Yutaka SUZUKI. "10808 Development of stacked high pressure resistance micro-channel heat exchanger for heat pump system." Proceedings of Conference of Kanto Branch 2013.19 (2013): 123–24. http://dx.doi.org/10.1299/jsmekanto.2013.19.123.

Full text

APA, Harvard, Vancouver, ISO, and other styles

17

Tanimizu, Katsuyoshi. "1801 Numerical investigation of a nanofluid-micro-channel heat exchanger for geothermal applications." Proceedings of the Fluids engineering conference 2010 (2010): 509–10. http://dx.doi.org/10.1299/jsmefed.2010.509.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

Borquist, Eric, Suvhashis Thapa, and Leland Weiss. "Experimental and lattice Boltzmann simulated operation of a copper micro-channel heat exchanger." Energy Conversion and Management 117 (June 2016): 171–84. http://dx.doi.org/10.1016/j.enconman.2016.02.066.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

YAMAMOTO, Kohei, Yutaka ABE, Akiko KANEKO, and Yutaka SUZUKI. "F223 Feasibility study of stacked high pressure resistance micro-channel heat exchanger for heat pump system." Proceedings of the Thermal Engineering Conference 2013 (2013): 381–82. http://dx.doi.org/10.1299/jsmeted.2013.381.

Full text

APA, Harvard, Vancouver, ISO, and other styles

20

TAKEUCHI, Genki, Takeshi SOMEYA, Yutaka SUZUKI, and Yutaka ABE. "OS4-10 The heat transfer performance of a high pressure resistant micro-channel stacked heat exchanger." Proceedings of the National Symposium on Power and Energy Systems 2006.11 (2006): 275–76. http://dx.doi.org/10.1299/jsmepes.2006.11.275.

Full text

APA, Harvard, Vancouver, ISO, and other styles

21

TAKEUCHI, Genki, Yutaka SUZUKI, and Yutaka ABE. "OS1-3 The Heat Transfer Characteristics of a High Pressure Resistant Micro-channel Stacked Heat Exchanger." Proceedings of the National Symposium on Power and Energy Systems 2007.12 (2007): 39–40. http://dx.doi.org/10.1299/jsmepes.2007.12.39.

Full text

APA, Harvard, Vancouver, ISO, and other styles

22

Saha, Sandip. "Numerical Study of Air-Flow Phenomena Through a Baffled Rectangular Micro-Channel." Journal of Modeling and Optimization 13, no. 2 (2021): 51–57. http://dx.doi.org/10.32732/jmo.2021.13.2.51.

Full text

Abstract:

The aim of this study is to investigate the heat transfer characteristics of turbulent airflow phenomena in a rectangular micro-channel in presence of two plane shaped (type-1) and diamond shaped (type-2) baffles which will help to develop various heat exchanger models. Finite volume method has been used to solve the governing equations and the FLUENT software has been employed to visualize the simulation results. For both the baffles, the profile of flow structure, normalized velocity profile, normalized friction factor and average Nusselt number have been investigated with the variations of

APA, Harvard, Vancouver, ISO, and other styles

23

Ding, Xin Rui, Long Sheng Lu, Chuan Chen, Zhan Shu He, and Dong Sheng Ou. "Heat Transfer Enhancement by Using Four Kinds of Porous Structures in a Heat Exchanger." Applied Mechanics and Materials 52-54 (March 2011): 1632–37. http://dx.doi.org/10.4028/www.scientific.net/amm.52-54.1632.

Full text

Abstract:

Four kinds of porous structures, copper wire mesh, metal foam, copper fiber sintered felts and cross-connected micro-channel plates were applied in a heat exchanger. Heat transfer coefficient per unit volume, pressure drop and comprehensive heat transfer effect of the heat exchanger were studied. The results show that: four kinds of porous structures can enhance the heat transfer performance obviously. The heat exchanger with copper metal foam has the largest comprehensive heat transfer coefficient which can reach 821.5W•m-3•K-1•Pa-1. And it increased about 2.5 times than that of the heat exch

APA, Harvard, Vancouver, ISO, and other styles

24

Li, Jiong, Shuangfeng Wang, and Weijun Zhang. "Air-side thermal hydraulic performance of an integrated fin and micro-channel heat exchanger." Energy Conversion and Management 52, no. 2 (2011): 983–89. http://dx.doi.org/10.1016/j.enconman.2010.08.026.

Full text

APA, Harvard, Vancouver, ISO, and other styles

25

Han, Yanhui, Yan Liu, Ming Li, and Jin Huang. "A review of development of micro-channel heat exchanger applied in air-conditioning system." Energy Procedia 14 (2012): 148–53. http://dx.doi.org/10.1016/j.egypro.2011.12.910.

Full text

APA, Harvard, Vancouver, ISO, and other styles

26

WU, Jianghong. "Adaptability Research on Micro-channel Heat Exchanger Applied to Heat Pump Air Conditioning System for Electrical Vehicle." Journal of Mechanical Engineering 48, no. 14 (2012): 141. http://dx.doi.org/10.3901/jme.2012.14.141.

Full text

APA, Harvard, Vancouver, ISO, and other styles

27

Sun, Tao, Shi Bu, Yue Han Xu, and Zhong Yi Wang. "Experimental Investigation of Water Flow Heat Transfer in Metal Foams." Applied Mechanics and Materials 189 (July 2012): 290–94. http://dx.doi.org/10.4028/www.scientific.net/amm.189.290.

Full text

Abstract:

This paper aims at finding the best pore density and porosity of metal foams for heat transfer, as well as the most proper operating conditions. A circulating water cooling system were designed which include micro-channel heat sink, heat exchanger, micro-pump, rot meter, electric heating rods, and conversion fans for the experiment. The comparison was made between different metal foam samples in terms of flow rate and equilibrium temperature of heating boundary. The results presented that a relatively low temperature can be achieved when flow rate is large, but at the same time the pressure dr

APA, Harvard, Vancouver, ISO, and other styles

28

Lee, Hae-Seung, Dong-Soon Jeon, Young-Lyoul Kim, Yong-Chan Kim, and Seon-Chang Kim. "An Experimental Study on the Evaporative Heat Transfer Characteristics of R-134a in a Micro-Channel Heat Exchanger." Transactions of the Korean Society of Mechanical Engineers B 34, no. 2 (2010): 113–20. http://dx.doi.org/10.3795/ksme-b.2010.34.2.113.

Full text

APA, Harvard, Vancouver, ISO, and other styles

29

Li, Jiong, Shuangfeng Wang, Wang Cai, and Weijun Zhang. "Numerical study on air-side performance of an integrated fin and micro-channel heat exchanger." Applied Thermal Engineering 30, no. 17-18 (2010): 2738–45. http://dx.doi.org/10.1016/j.applthermaleng.2010.07.028.

Full text

APA, Harvard, Vancouver, ISO, and other styles

30

Ren, Tao, Guoliang Ding, Tingting Wang, and Haitao Hu. "A general three-dimensional simulation approach for micro-channel heat exchanger based on graph theory." Applied Thermal Engineering 59, no. 1-2 (2013): 660–74. http://dx.doi.org/10.1016/j.applthermaleng.2013.06.035.

Full text

APA, Harvard, Vancouver, ISO, and other styles

31

Sarafraz, M., Mohammad Safaei, Zhe Tian, Marjan Goodarzi, Enio Bandarra Filho, and M. Arjomandi. "Thermal Assessment of Nano-Particulate Graphene-Water/Ethylene Glycol (WEG 60:40) Nano-Suspension in a Compact Heat Exchanger." Energies 12, no. 10 (2019): 1929. http://dx.doi.org/10.3390/en12101929.

Full text

Abstract:

In the present study, we report the results of the experiments conducted on the convective heat transfer of graphene nano-platelets dispersed in water-ethylene glycol. The graphene nano-suspension was employed as a coolant inside a micro-channel and heat-transfer coefficient (HTC) and pressure drop (PD) values of the system were reported at different operating conditions. The results demonstrated that the use of graphene nano-platelets can potentially augment the thermal conductivity of the working fluid by 32.1% (at wt. % = 0.3 at 60 °C). Likewise, GNP nano-suspension promoted the Brownian mo

APA, Harvard, Vancouver, ISO, and other styles

32

Khan, Muhammad Zia Ullah, Emad Uddin, Bilal Akbar, et al. "Investigation of Heat Transfer and Pressure Drop in Microchannel Heat Sink Using Al2O3 and ZrO2 Nanofluids." Nanomaterials 10, no. 9 (2020): 1796. http://dx.doi.org/10.3390/nano10091796.

Full text

Abstract:

A new micro heat exchanger was analyzed using numerical formulation of conjugate heat transfer for single-phase fluid flow across copper microchannels. The flow across bent channels harnesses asymmetric laminar flow and dean vortices phenomena for heat transfer enhancement. The single-channel analysis was performed to select the bent channel aspect ratio by varying width and height between 35–300 μm for Reynolds number and base temperature magnitude range of 100–1000 and 320–370 K, respectively. The bent channel results demonstrate dean vortices phenomenon at the bend for Reynolds number of 50

APA, Harvard, Vancouver, ISO, and other styles

33

ZHANG, Xufeng, Yutaka ABE, Akiko KANEKO, and Tetsuya KANAGAWA. "GS0606 Performance evaluation of micro-channel heat exchanger and phase change in a capillary glass tube." Proceedings of Conference of Kanto Branch 2016.22 (2016): _GS0606–1_—_GS0606–2_. http://dx.doi.org/10.1299/jsmekanto.2016.22._gs0606-1_.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

ISHIZUKA, Takao, Lam Tri NGO, Yasushi MUTO, Konstantin NIKITIN, Nobuyoshi TSUZUKI, and Yasuyoshi KATO. "3537 Application of Supercritical CO_2 Cycle to Power Plant : Development of New Micro Channel Heat Exchanger." Proceedings of the JSME annual meeting 2005.3 (2005): 231–32. http://dx.doi.org/10.1299/jsmemecjo.2005.3.0_231.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

Li, Huan, Huoxing Liu, and Zhengping Zou. "Experimental study and performance analysis of high-performance micro-channel heat exchanger for hypersonic precooled aero-engine." Applied Thermal Engineering 182 (January 2021): 116108. http://dx.doi.org/10.1016/j.applthermaleng.2020.116108.

Full text

APA, Harvard, Vancouver, ISO, and other styles

36

Rodríguez-Guerra, Yatziri, Luciano A. Gerling, Enrique A. López-Guajardo, Francisco J. Lozano-García, Krishna D. P. Nigam, and Alejandro Montesinos-Castellanos. "Design of Micro- and Milli-Channel Heat Exchanger Reactors for Homogeneous Exothermic Reactions in the Laminar Regime." Industrial & Engineering Chemistry Research 55, no. 22 (2016): 6435–42. http://dx.doi.org/10.1021/acs.iecr.6b00323.

Full text

APA, Harvard, Vancouver, ISO, and other styles

37

MATSUDA, Haruyuki. "Design optimization of a micro-channel heat exchanger using Kriging-based response surface method and genetic algorithm." Proceedings of OPTIS 2016.12 (2016): 2104. http://dx.doi.org/10.1299/jsmeoptis.2016.12.2104.

Full text

APA, Harvard, Vancouver, ISO, and other styles

38

Roberts, Nathan S., Refat Al-Shannaq, Jamal Kurdi, Shaheen A. Al-Muhtaseb, and Mohammed M. Farid. "Efficacy of using slurry of metal-coated microencapsulated PCM for cooling in a micro-channel heat exchanger." Applied Thermal Engineering 122 (July 2017): 11–18. http://dx.doi.org/10.1016/j.applthermaleng.2017.05.001.

Full text

APA, Harvard, Vancouver, ISO, and other styles

39

Deng, Y., S. Menon, Z. Lavrich, H. Wang, and C. L. Hagen. "Design, simulation, and testing of a novel micro-channel heat exchanger for natural gas cooling in automotive applications." Applied Thermal Engineering 110 (January 2017): 327–34. http://dx.doi.org/10.1016/j.applthermaleng.2016.08.193.

Full text

APA, Harvard, Vancouver, ISO, and other styles

40

Song, Chan Ho, Seok Ho Yoon, and Joon Seok Choi. "A Study of Diffusion Bonding Process for High Temperature and High Pressure Micro Channel Heat Exchanger Using Inconel 617." Korean Journal of Air-Conditioning and Refrigeration Engineering 27, no. 2 (2015): 87–93. http://dx.doi.org/10.6110/kjacr.2015.27.2.087.

Full text

APA, Harvard, Vancouver, ISO, and other styles

41

Parekh, Ashok, Tejendra Patel, and Parbhubhai Tailor. "A Comparative Study of Refrigerant Side Condensing Heat Transfer Coefficient for Horizontal Mini Channel." MATEC Web of Conferences 166 (2018): 03003. http://dx.doi.org/10.1051/matecconf/201816603003.

Full text

Abstract:

Heat exchanger developments are driven by increase in energetic efficiency and emission reduction. To reach the required standards, new systems are required based on mini-channels along with macro channels also. Mini-channels can be described as tubes with one or more ports extruded in aluminium or any other material like copper, steel etc. with hydraulic diameter in the range of 0.2 to 3 mm. Its use in refrigeration systems became a reality; thanks to the human ability to make micro-scale systems. Some heat exchanger enterprises have some models developed specially for their use in automotive

APA, Harvard, Vancouver, ISO, and other styles

42

Nacke, Robert, Brittany Northcutt, and Issam Mudawar. "Theory and experimental validation of cross-flow micro-channel heat exchanger module with reference to high Mach aircraft gas turbine engines." International Journal of Heat and Mass Transfer 54, no. 5-6 (2011): 1224–35. http://dx.doi.org/10.1016/j.ijheatmasstransfer.2010.10.028.

Full text

APA, Harvard, Vancouver, ISO, and other styles

43

Yin, X., and H. H. Bau. "Uniform Channel Micro Heat Exchangers." Journal of Electronic Packaging 119, no. 2 (1997): 89–94. http://dx.doi.org/10.1115/1.2792225.

Full text

Abstract:

The performance characteristics of micro heat exchangers consisting of straight channels fabricated in a silicon wafer and operating with liquid nitrogen are evaluated theoretically. The three-dimensional conjugate temperature and flow fields are calculated numerically. The thermal resistance is computed as a function of various geometric parameters. The optimal dimensions which minimize the heat exchanger’s thermal resistance are identified. Additionally, a simple, approximate, analytical model, adequate when the ratio of the solid and liquid thermal conductivities is large, is presented and

APA, Harvard, Vancouver, ISO, and other styles

44

Hu, Yue Lian. "Research on Trait in Heat Exchange and Flow of Inner Single-Phase Currentin Micro Channel." Advanced Materials Research 516-517 (May 2012): 408–13. http://dx.doi.org/10.4028/www.scientific.net/amr.516-517.408.

Full text

Abstract:

During recent years,micro-channel heat transfer technique has been successfully used in many practical situations，and has notable advantages of high heat transfer efficiency and compact configuration.It is an important subject in modern hydrodynamic and heat transfer research field.Computational fluid dynamic program CFX will be used in this article to simulate flow and heat transfer of single-phase water in micro-channel ,flow and temperature felid will be described visually in CFX, and this object is searching a new method to research more flow and heat transfer of single-phase water.

APA, Harvard, Vancouver, ISO, and other styles

45

Zeng, Liping, Xing Liu, Quan Zhang, Jun Yi, Xianglong Liu, and Huan Su. "Research on Heat Transfer Performance of Micro-Channel Backplane Heat Pipe Air Conditioning System in Data Center." Applied Sciences 10, no. 2 (2020): 583. http://dx.doi.org/10.3390/app10020583.

Full text

Abstract:

This paper deals with the heat transfer performance of a micro-channel backplane heat pipe air conditioning system. The optimal range of the filling rate of a micro-channel backplane heat pipe air conditioning system was determined in the range of 65–75%, almost free from the interference of working conditions. Then, the influence of temperature and air volume flow rate on the heat exchange system were studied. The system maximum heat exchange is 7000–8000 W, and the temperature difference between the inlet and outlet of the evaporator and the condenser is almost 0 °C. Under the optimum refrig

APA, Harvard, Vancouver, ISO, and other styles

46

Alam, Wiqas. "Material Selection for Micro Channel Heat Exchangers for Industrial Waste Heat Recovery." International Journal of Engineering Works 06, no. 11 (2019): 406–13. http://dx.doi.org/10.34259/ijew.19.611406413.

Full text

APA, Harvard, Vancouver, ISO, and other styles

47

Mehrpouya, M., and S. Emamian. "Recent advantages in laser fabrication of micro-channel heat exchangers." Materialwissenschaft und Werkstofftechnik 48, no. 3-4 (2017): 205–9. http://dx.doi.org/10.1002/mawe.201600759.

Full text

APA, Harvard, Vancouver, ISO, and other styles

48

Zess, James Allen, and Martin Dressler. "Significant Benefits of 3D Screen Printing for Manufacturing Micro-Channel Heat Exchangers." Materials Science Forum 941 (December 2018): 2148–53. http://dx.doi.org/10.4028/www.scientific.net/msf.941.2148.

Full text

Abstract:

Micro-channel heat exchangers (MCHXs) manufactured by Zess & Lin Industries provide highly effective heat transfer and are used in a growing number of critical applications. MCHXs consist of stainless steel or high temperature Nickel-based alloy plates with micro channels that are chemically etched or machined into each plate. These traditional extractive manufacturing methods of chemical etching and machining used in manufacturing MCHX plates are difficult and costly as a large percentage of expensive alloy is lost during manufacturing.

APA, Harvard, Vancouver, ISO, and other styles

49

Lee, Seunghyun, and Issam Mudawar. "Transient characteristics of flow boiling in large micro-channel heat exchangers." International Journal of Heat and Mass Transfer 103 (December 2016): 186–202. http://dx.doi.org/10.1016/j.ijheatmasstransfer.2016.07.040.

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

Vamadevan, Gowreesan, and Frank F. Kraft. "Processing effects in aluminum micro-channel tube for brazed R744 heat exchangers." Journal of Materials Processing Technology 191, no. 1-3 (2007): 30–33. http://dx.doi.org/10.1016/j.jmatprotec.2007.03.040.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!