Academic literature on the topic 'Micro-DYNAMO (Computer program language)'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Micro-DYNAMO (Computer program language).'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Micro-DYNAMO (Computer program language)"
1
Madsen, Bjarne. "Interactive computer processing and interpretation of pumping test data. A Micro-computer program using dynamic graphics." Danmarks Geologiske Undersøgelse Serie C 4 (February 28, 1985): 1–98. http://dx.doi.org/10.34194/seriec.v4.7098.
Full textAbstract:
This paper presents a computer program for analysing pumping test data. The program is interactive and may be used with a minimum knowledge of computers. It can be applied to a wide range of transient problem types, from one dimensional groundwater flow to flow in anisotropic aquifers, horizontally as well as vertically. Various forms of type curves based on analytical solutions to the groundwater flow equation are available for the interpretation. The paper includes a listing of the entire computer program containing a total of about 1. 800 lines. The programming language is a BASIC-version suited for the Tektronix 4054, a graphic screen with a refresh option. This option allows the user to perform type curve matching directly on the screen by moving the chosen type curve to the position where it gives the best fit, in a manner similar to traditional manual chart interpretation. Plots of the measured data may be conveniently reproduced in semilog and log-log diagrams, either on the screen or as a hard copy printed by a plotter. The present version of the program makes use of tape cartridges, both for storing program and data files.
2
Moukalled, F., N. Naim, and I. Lakkis. "Computer-Aided Analysis of Centrifugal Compressors." International Journal of Mechanical Engineering Education 22, no. 4 (1994): 245–58. http://dx.doi.org/10.1177/030641909402200402.
Full textAbstract:
This paper describes computer-aided analysis of centrifugal compressors (CAACC), a micro-computer-based, interactive, and menu-driven software package for use as an educational tool by mechanical engineering students studying radial flow compressors. CAACC is written in the Pascal computer language and runs on IBM PC, or compatible, computers. In addition to solving for any unknown variables, the graphical utilities of the package allow the user to display a diagrammatic sketch of the compressor and to draw velocity diagrams at several locations. Furthermore, the program allows the investigation and plotting of the variation of any parameter versus any other parameter. Through this option, the package guides the student in learning the basics of centrifugal compressors by the various performance studies that can be undertaken and graphically displayed. The comprehensive example presented demonstrates the capabilities of the package as a teaching tool.
3
Crista Wijayanti, Erythrina. "A Study On Media In Listening Comprehension At Second Year Students Of English Language Education Program." Education of English as Foreign Language 4, no. 1 (2021): 37–48. http://dx.doi.org/10.21776/ub.educafl.2021.004.01.04.
Full textAbstract:
There were two findings in this research. First, media that helped the students in understanding Listening Comprehension materials and second, the students’ reasons in choosing the media seen from two aspects: (1) how the media helped the students to master the micro and macro skill of listening and (2) how the media helped the students to understand the listening comprehension process. The first finding showed 74.13% of students selected audio visual media that helped them in understanding Listening Comprehension, while 25.175% and 0.695% of them preferred audio and visual media respectively. The second finding showed to improve to the macro skills of listening, 61.73% of the students argued that they were helped by audio visual media, while 38.26% of them were helped by audio media. On the other hand, 53.35% of the students aired their opinion that their micro skills of listening were improved through the use of audio visual media and 46.64% of them stated that they are helped with the audio media use. Film, television, video, computer, gadget, games and song accommodated all of the eight listening comprehension processes. Therefore, the researcher suggests that the teacher should use audio media to help the students in mastering the micro skill of listening and audio visual media to assist the students in understanding the macro skill of listening. In addition, film, television, video, computer, gadget, games and song should be used to support the students in comprehending the listening comprehension process.
4
Gurbanova, Lala Gadir. "Experimental-Phonetic Analysis of Suprasentential Units in the English Language." International Journal of English Linguistics 10, no. 3 (2020): 229. http://dx.doi.org/10.5539/ijel.v10n3p229.
Full textAbstract:
The current article deals mainly with the suprasentential units in English and their characteristic peculiarities. Some viewpoints of western, Russian and Azerbaijani linguists are discussed here. One of the important matters discussed here is to distinguish the notions “text” and “suprasentential units”, which was possible owing to the viewpoints and investigations of specialists in this field. To determine “suprasentential units”, some other terms such as, “micro-text” and “macro-text” are discussed here, too.
 
 To get a detailed information on “suprasentential units”, phonetic experiment was carried out. The essence of the article is to determine the phoneticparameters of “suprasentential units” in the form of a short text. The experiment was realised at the Institute of Linguistics of the National Academy of Sciences of Azerbaijan. For acoustic analysis of the recorded materials, “Speech Analyser”, “WinCecil”, “PRAAT”, “MacSpeech Lab” programs have been used. In the acoustic analysis of speech signals of the given short text, the valuable “PRAAT” computer program created by the professors of Amsterdam University Paul Boersman and David Veenik has been widely used. “PRAAT” computer program has wide opportunities, such as to hold ossillographic and spectographic analysis of language materials (in our case, short texts), to get indicators of tonal frequency intensity, and length of language materials, etc. The above mentioned computer program provides specialists and learners with the chance of learning speech fragments having the recording time from several m/sec to several hours.
5
DAI, Zhongning, Chaigang Ren, and Fujia Yang. "Nuclear Microprobe and Micro-PIXE Analysis of Thick Target: Program and Its Applications." International Journal of PIXE 08, no. 01 (1998): 33–45. http://dx.doi.org/10.1142/s0129083598000054.
Full textAbstract:
PIXE (Particle Induced X-ray Emission), mainly Proton Induced X-ray Emission, has been developed into a well established technique for elemental analysis, especially for trace elemental analysis down to ppm or even ppb level. Nuclear Microprobe is a quickly developing technique around the world for 2 dimensional or even 3 dimensional element analysis if several nuclear analytical techniques, such as Rutherford backscattering spectrometry (RBS) can be available at the same time. The present resolution of NMP can be down to less than 1μm. To thick target analysis, i.e., the energy loss effect and the consequent X-ray cross section Change with the depth can not be neglected, therefore we have to consider the process of particle interactions with atoms in detail. In this article, NMP (Nuclear Micro-Probe) and micro-PIXE analysis of thick target, which are mainly involved into the process of ions interaction with atoms, are reviewed on the basis of work what we have done at Fudan University. The software package TSPIXE (PIXE analysis of Thick Sample), which includes different versions for different applications, developed at Fudan University for quantitative analysis of thick target and simulation of PIXE and micro-PIXE spectra are described and its performance is demonstrated too. The TSPIXE package, which includes TSPIXE version I, version II, version III and TSμPIXE, was written in FORTRAN and C computer language and can be run at PC computer under MSDOS or WINDOWS environment. From the different demonstrations and applications we can see the package is very useful to quantitative analysis of thick samples and to understand the relationships between elemental X-ray intensity distributions and concentration distributions, sample structure, beam size and etc.
6
Zhang, Jin Feng, Xiao Chun Wu, and Hai Long Ding. "Design and Realization of Intelligent Electrical Resistivity Measurement System." Advanced Materials Research 1039 (October 2014): 210–16. http://dx.doi.org/10.4028/www.scientific.net/amr.1039.210.
Full textAbstract:
Based on graphic program language LabVIEW and Micro Control Unit MSP430F169, an intelligent electrical resistivity measurement system with four-point probe and four-line was studied in this paper. Structured Query Language of LabVIEW was applied for calibration and management in database. Hardware feedback and software compensation technologies were designed in high-precision current source, whose range was automatic selected in auto-mode. Between the computer program and hardware control unit controlled by MCU, a RS-232 data communication protocol was applied in order to improve the ability of human-machine interaction and automation degree. Experiment results in semiconductor and metal material science indicated that the measurement system measured accurately and automotive, the information database of the tested material was the foundation of data analyzing and data mining.
7
Zhou, Chang Ying. "Computer Design of Low Silicon Sinter Fractal Dimension Based on SEM Images." Advanced Materials Research 510 (April 2012): 694–97. http://dx.doi.org/10.4028/www.scientific.net/amr.510.694.
Full textAbstract:
Sinter as an intermediate product of the iron making, is a multiphase medium, and the microstructure of finished sinter directly affects the quality of sinter. But because the sinter micro structure of the extreme irregularities, it is difficult to use the traditional quantitative methods on the accurate description, the introduction of the fractal theory provides us with new ideas. According to the characteristics of sinter SEM photos, and used the VC++ computer programming language, it is researched and designed that the fractal dimension of calculation program (FWJS) based on the sinter SEM microscopic photos, through which got the fractal dimension value and describe the microscopic structure of the sample quantificationally, which has very important practical significance for the fractal research of sinter .
8
Adekunle, Adefemi Adeyemi, Samuel B. Adejuyigbe, and Lateef O. Mudashiru. "Improvement on Development of CAD Software for Shaft under Various Loading Conditions." Advanced Materials Research 628 (December 2012): 343–49. http://dx.doi.org/10.4028/www.scientific.net/amr.628.343.
Full textAbstract:
In time past, designs of shafts were conservative in approach as relatively low working stresses were employed to cover up for unknown “Factors of Ignorance”. [1]. And where high stresses are involved, greater shaft dimension is employed for such design. This approach necessarily made the production cost high as quite a lot of materials are involved in such production. The primary reason for such approach is to safeguard the shaft failure in most operations. Unfortunately, the mechanism of failure mode was not well understood and because most of the applications in which shafts are employed are of great importance, which in some cases affects life negatively (i.e. involving loss of lives) and distortion of operations. Despite all these developments, designers are still faced with the problems of working with large numbers of formulas, computations and iteration procedures involved in the design of shafts. These have made the design procedures of shafts both cumbersome and rigorous, hence time consuming. This problem becomes more pronounced if the designer is interested in seeing the effects of the variation of one or more design parameter, this means he has to start again from scratch. Fortunately, these problems can be overcome if the various advantages, utilities and flexibilities which modern high – speed micro – computers offer are put into good use in the design of shafts. This study was carried out to design shaft under various loading conditions using Computer Aided Design, and results gotten proved that it saves wastage of materials, and it safes time as well A software package (or program) was developed using the formulas initially derived and a numerical procedure for computing the deflection using the double integration methods. The Programming language used was Visual Studio C#. This objective was achieved in part as the program so developed satisfactorily handle design based on strength and safety of the shaft.
9
BELZ, JULIE A. "Institutional and individual dimensions of transatlantic group work in network-based language teaching." ReCALL 13, no. 2 (2001): 213–31. http://dx.doi.org/10.1017/s0958344001000726a.
Full textAbstract:
Network-based language teaching (NBLT) involves the application of global or local communication networks within foreign and second language education (Warschauer and Kern, 2000). In telecollaboration, a type of NBLT, distally located language learners use internet communication tools to support dialogue, debate, collaborative research and social interaction for the purposes of language development and cultural awareness (e.g. Kinginger et al., 1999). To date, the research on NBLT has been limited, focusing primarily on pedagogical implementations of technology and linguistic features of online communication. In particular, researchers have not robustly explored social and institutional dimensions of telecollaboration (Chapelle, 2000:217) nor have they adequately investigated the pervasive assumption that telecollaborative interaction will necessarily and unproblematically afford language learning (e.g. Kramsch and Thorne, to appear). Drawing on social realism (Layder, 1993), a sociological theory which emphasizes the inter-relationship between structure, i.e. society and institution, and agency, i.e. situated activity and psycho-biography, in researching and explaining social action, I present a sociocultural account of German-American telecollaboration. In particular, I explore the meanings that the macro features of (1) language valuation (Hilgendorf, 1996); (2) membership in electronic discourse communities (Gee, 1999); and (3) culturally determined classroom scripts (Hatch, 1992) may have for the differential functionality of virtual group work in this partnership. Differences in group functionality are reflected at the micro-interactional level in terms of (1) frequency and length of correspondence; (2) patterns of discursive behavior such as question-answer pairs; and (3) opportunities for assisted L2 performance and negotiation of meaning. Ethnographic data (e.g. interviews, electronic and classroom discourse, surveys and participant observations) on individual psycho-biographies are interwoven with macro-level descriptions and statistics to paint a rich picture of learner behavior in intercultural telecollaboration. This project is funded by a United States Department of Education International Research and Studies Program Grant (CFDA No.: 84.017A). The author is a research associate for the German component.
10
Ahmed, Anwer Sabah, Heyam A. Marzog, and Laith Ali Abdul-Rahaim. "Design and implement of robotic arm and control of moving via IoT with Arduino ESP32." International Journal of Electrical and Computer Engineering (IJECE) 11, no. 5 (2021): 3924. http://dx.doi.org/10.11591/ijece.v11i5.pp3924-3933.
Full textAbstract:
Every day, the technologies are expanding and developed with extra things to them. A cloud computing (CC) and Internet of things (IoT) became deeply associated with technologies of the internet of future with one supply the other a way helping it for the successful. Arduino microcontroller is used to design robotic arm to pick and place the objects by the web page commands that can be used in many industrials. It can pick and place an object from source to destination and drive the screws in into its position safely. The robot arm is controlled using web page designed by (html) language which contain the dashboard that give the commands to move the servos in the desired angle to get the aimed direction accordingly. At the receiver end there are four servo motors which are made to be interfaced with the micro controller (Arduino) which is connected to the wireless network router. One of these is for the arm horizontally movement and two for arm knee, while the fourth is for catch tings or tight movement. Two ultra-sonic sensors are used for limiting the operation area of the robotic arm. Finally, Proteus program is used for the simulation the controlling of robot before the hardware installation
Dissertations / Theses on the topic "Micro-DYNAMO (Computer program language)"
1
Beyer, Eric W. "Design, testing, and performance of a hybrid micro vehicle - the Hopping Rotochute." Diss., Atlanta, Ga. : Georgia Institute of Technology, 2009. http://hdl.handle.net/1853/29661.
Full text
2
McMahon, James S. "DYNAMO systems model of the roll-response of semisubmersibles." Master's thesis, This resource online, 1991. http://scholar.lib.vt.edu/theses/available/etd-01262010-020130/.
Full text
3
Mbhambhu, Tsakani Joseph. "A Java bytecode compiler for the 8051 micro-controller." Thesis, Stellenbosch : Stellenbosch University, 2002. http://hdl.handle.net/10019.1/52645.
Full textAbstract:
Thesis (MScEng)--Stellenbosch University, 2002.<br>ENGLISH ABSTRACT: This report describes the development of a Java Bytecode Compiler (JBC) for the 8051
micro-controller. Bytecodes are found in the class file generated when a Java source file
is compiled with the java compiler (javac). On Java platforms, the Java Virtual Machine
(JVM) interprets and executes the bytecodes. Currently existing Java platforms do not
support programming the 8051 using Java.
As an 8-bit micro-controller with only 64 KB of total memory, the 8051's word size and
memory is too limited to implement a NM. Moreover, full applications of the 8051
require that it handles hardware interrupts and access 110 ports and special registers.
This thesis proposes a JBC to compile the standard bytecodes found in the class file and
generate equivalent assembly code that can run on the 8051.
The JBC was tested on the 8051 compatible AT89C52*44 micro-controller with a
program that simulates an irrigation controller. The code generated by the JBC executes
correctly but is large in size and runs slower than code of a program written in assembly.
Conclusions drawn are that the JBC can be used to compile Java programs intended for
the 8051 and its family of micro-controllers. In particular, it is especially a good tool for
people who prefer Java to other languages. The JBC is suitable for smaller programs that
do not have efficiency as a major requirement.<br>AFRIKAANSE OPSOMMING: Hierdie tesis beskryf die ontwikkeling van 'n Java "Bytecode" samesteller (Java
Bytecode Compiler, JBC) vir die 8051 mikro beheerder argitektuur. "Bytecodes" is die
produk van die standaard Java samesteller "javac" en word deur 'n platform spesifieke
Java Virtuele Masjien gelees en uitgevoer. Geen NM is huidig beskikbaar vir die 8051
argitektuur nie.
Die gekose 8-bis 8051 mikro beheerder het 'n beperkte interne geheue van 64kB. Hierdie
beperking maak dit nie geskik vir 'n IVM nie. Daar moet ook voorsiening gemaak word
om hardeware onderbrekings te hantering en te kan kommunikeer met die poorte en
spesiale registers van die mikro beheerder.
JBC word ontwikkel wat die standaard "Bytecode" kompileer na geskikte masjien kode
wat dan op die mikro beheerder gebruik kan word.
Die JBC is ontwikkel en toets en 'n eenvoudige besproeiing program is geskryf om op 'n
Atmel AT89C52*44 te loop. Die kode werk goed maar is nog nie geoptimeer nie en loop
onnodig stadig. Optimerings metodes word aanbeveel en bespreek.
Die gevolgtrekking is dat die huidige JBC kan gebruik word om Java kode te skryfvir die
8051 beheerder. Dit maak die hardeware platform nou beskikbaar aan Java
programmeerders. Daar moet wel gelet word dat die JBC op die oomblik net geskik is vir
klein programme en waar spoed nie die primêre vereiste is nie.
4
Cook, Sean Christopher Umphress David A. "Regressing object-oriented principles to achieve performance gains on the Java Platform, Micro edition." Auburn, Ala., 2006. http://repo.lib.auburn.edu/2006%20Fall/Theses/COOK_SEAN_42.pdf.
Full text
5
Ramonyalioa, Thethe Tshepo. "Java implementation of AX.25 link-layer protocol for future micro-satellites." Thesis, Stellenbosch : Stellenbosch University, 2003. http://hdl.handle.net/10019.1/53481.
Full textAbstract:
Thesis (MScEng)--University of Stellenbosch, 2003.<br>ENGLISH ABSTRACT: This thesis investigates the viability of implementing the AX.25 protocol in Java, for
satellite applications. The AX.25 protocol forms part of the Communications subsystem
of a micro-satellite. It describes the implementation of a standard packet-radio link-layer
communication protocol in Java, for future use on satellite on-board computers, allowing
amongst other things, a reliable communications platform.
An investigation into factors that make AX.25 preferable over other communication
protocols, as well as advantages of Java as a language used in the implementation, is
made. The design of the implementation is described. Finally, efficiency of the Java
implementation is evaluated and optimizations identified and recommended.<br>AFRIKAANSE OPSOMMING: Hierdie tesis bespreek die lewensvatbaarheid van 'n Java implementering van die AX.25
protokol vir satelliet toepassings. AX.25 is deel van die kommunikasie stelsel van 'n
mikro-satelliet. Dit beskryf die implementering van 'n standaard radio data kommunikasie
intervlak in Java vir die toekomstige gebruik op die aanboord-rekenaarstelsels van
satelliete. Hierdie intervlak bied, insluitende ander eienskappe, 'n betroubare
kommunikasie platform.
In Deeglike ondersoek na die faktore wat AX.25 meer aanloklik maak vir satellite
toepassings is gemaak, asook hoe 'n Java implementering vergelyk met ander beskikbare
tegnologie. Die geskiktheid van Java vir die implementering word ook bespeek in die lig
van evaluerings wat gedoen is op die finale protokol.
Books on the topic "Micro-DYNAMO (Computer program language)"
6
B, Stern Nancy, and Stern Robert A, eds. Getting started with micro focus personal COBOL 2.0. Wiley, 1994.
Find full text
8
Conlon, Tom. Learning Micro-PROLOG: A problem-solving approach. Addison-Wesley Pub. Co., 1985.
Find full text
10
Grauer, Robert T. COBOL: From micro to mainframe : preparing for the new millennium. 3rd ed. Prentice Hall, 2000.
Find full textConference papers on the topic "Micro-DYNAMO (Computer program language)"
1
Pao, Y. C., and Erik L. Ritman. "Generalized Algorithms for Interactive Warping Analysis of Porous Cross Sections." In ASME 1999 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1999. http://dx.doi.org/10.1115/detc99/cie-9070.
Full textAbstract:
Abstract Algorithms have been developed for warping analysis and calculation of the shearing stresses in a general porous cross section of a long rod when it is subjected to twisting torques at its ends. The shape and dimensions of the cross section full of holes are defined from the binary segmented image data with by a micro-CT scanning technique. Finite difference approximation of the Laplace equation governing the cross-sectional warping leading to the matrix solution by a Gauss-Seidel process is discussed. Method of pointer matrix which keeps the locations of the nonzero elements of the coefficient matrix, is employed to expedite the iterative solution. Computer programs are coded in QuickBASIC language to facilitate plotting of the computed distributions of warping and shearing stresses. The classical torsional problem of square and thin-walled cross sections are used to reexamine the accuracy of the developed algorithms and results are found to be in very good agreement.
2
Nagasawa, S., H. Sakuta, and M. Goto. "Development of Finite Element Analysis Support System Based on the Hybrid Knowledge Model." In ASME 1992 International Computers in Engineering Conference and Exposition. American Society of Mechanical Engineers, 1992. http://dx.doi.org/10.1115/cie1992-0090.
Full textAbstract:
Abstract This paper deals with conceptual orientation and system development of intelligent support system for general purpose FEA (finite element analysis) programs. An integrated support system called “InhierTalk” (Integrated interactive environment for hierarchical representation for FEA) has been developed in Smalltalk, an object oriented language, in order to confirm effectivity of hierarchical representation and to establish an optimum method of the system development. Two object-oriented knowledge models which consist of macro visual data representation and micro regularized data representation are proposed. In the development, it is found to be clear that active and passive evaluation methods are effective for construction of support system.
3
Laurens, Andre´. "Micro (Cost) Technologies for Spacecraft Control and Command: An Example, Balloon-Borne Stabilised Gondolas." In CANEUS 2006: MNT for Aerospace Applications. ASMEDC, 2006. http://dx.doi.org/10.1115/caneus2006-11014.
Full textAbstract:
Balloons are long-time known space vehicles for science missions and technology in-flight experiments, with instruments that need out-of-atmosphere or in-situ measurements, thus being complementary to the satellite. They carry micro (few hundred grams) to mega (few tons) payloads, but all of them require micro cost, short development, multiple flights. Among the big ones, CNES stabilised gondolas are versatile space platforms used to fly science instruments mainly coming for aeronomy and astrophysics communities, and requiring stabilisation and pointing capabilities, analogous to satellite attitude control subsystems. For them, cost and development constraints cannot be met without highly flexible architectures and off-the-shelf components. In order to increase gondola flexibility to new missions (or adaptability to mission evolutions), new hardware and software solution have been studied for control & command, including stabilisation and pointing functions. Promoted technologies are those of industrial computers, ground networks, free software and, over all, Ada language, for they are open, standard, powerful, low-cost and long-lasting solutions. After a brief description of domain-oriented characteristics of the stabilised gondola control & command, this paper introduces the various technologies and main design principles proposed to meet system-level goals. Then focus is put on on-board architectures: full Ada95 real-time distributed applications on an Ethernet-IP LAN of industrial PCs running Linux, and describes the prototyping work and preliminary development done to ensure feasibility. The paper then discusses the applicability of such solutions to global, ground-to-board, distributed control & command applications, through an IP-based telemetry & telecommand link, such as the one under development in CNES for balloon systems. As a conclusion, this paper shows how adoption of these technologies for other space programs such as satellite platforms and payloads may change design, development costs, duration and organisation, as well as it may open new ways in ground-to-board communication and spacecraft operation.